rugged 0.27.10 → 0.27.10.1

data/vendor/libgit2/deps/zlib/COPYING

@@ -1,27 +0,0 @@
-Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
-
-This software is provided 'as-is', without any express or implied
-warranty. In no event will the authors be held liable for any
-damages arising from the use of this software.
-
-Permission is granted to anyone to use this software for any
-purpose, including commercial applications, and to alter it and
-redistribute it freely, subject to the following restrictions:
-
-1. The origin of this software must not be misrepresented; you
-   must not claim that you wrote the original software. If you
-   use this software in a product, an acknowledgment in the
-   product documentation would be appreciated but is not
-   required.
-
-2. Altered source versions must be plainly marked as such, and
-   must not be misrepresented as being the original software.
-
-3. This notice may not be removed or altered from any source
-   distribution.
-
-Jean-loup Gailly       Mark Adler
-
-The data format used by the zlib library is described by RFCs
-(Request for Comments) 1950 to 1952 in the files rfc1950 (zlib
-format), rfc1951 (deflate format) and rfc1952 (gzip format).

data/vendor/libgit2/include/git2/apply.h

@@ -1,149 +0,0 @@
-/*
- * Copyright (C) the libgit2 contributors. All rights reserved.
- *
- * This file is part of libgit2, distributed under the GNU GPL v2 with
- * a Linking Exception. For full terms see the included COPYING file.
- */
-#ifndef INCLUDE_git_apply_h__
-#define INCLUDE_git_apply_h__
-
-#include "common.h"
-#include "types.h"
-#include "oid.h"
-#include "diff.h"
-
-/**
- * @file git2/apply.h
- * @brief Git patch application routines
- * @defgroup git_apply Git patch application routines
- * @ingroup Git
- * @{
- */
-GIT_BEGIN_DECL
-
-/**
- * When applying a patch, callback that will be made per delta (file).
- *
- * When the callback:
- * - returns < 0, the apply process will be aborted.
- * - returns > 0, the delta will not be applied, but the apply process
- *      continues
- * - returns 0, the delta is applied, and the apply process continues.
- *
- * @param delta The delta to be applied
- * @param payload User-specified payload
- */
-typedef int GIT_CALLBACK(git_apply_delta_cb)(
-	const git_diff_delta *delta,
-	void *payload);
-
-/**
- * When applying a patch, callback that will be made per hunk.
- *
- * When the callback:
- * - returns < 0, the apply process will be aborted.
- * - returns > 0, the hunk will not be applied, but the apply process
- *      continues
- * - returns 0, the hunk is applied, and the apply process continues.
- *
- * @param hunk The hunk to be applied
- * @param payload User-specified payload
- */
-typedef int GIT_CALLBACK(git_apply_hunk_cb)(
-	const git_diff_hunk *hunk,
-	void *payload);
-
-/** Flags controlling the behavior of git_apply */
-typedef enum {
-	/**
-	 * Don't actually make changes, just test that the patch applies.
-	 * This is the equivalent of `git apply --check`.
-	 */
-	GIT_APPLY_CHECK = (1 << 0),
-} git_apply_flags_t;
-
-/**
- * Apply options structure
- *
- * Initialize with `GIT_APPLY_OPTIONS_INIT`. Alternatively, you can
- * use `git_apply_options_init`.
- *
- * @see git_apply_to_tree, git_apply
- */
-typedef struct {
-	unsigned int version; /**< The version */
-
-	/** When applying a patch, callback that will be made per delta (file). */
-	git_apply_delta_cb delta_cb;
-
-	/** When applying a patch, callback that will be made per hunk. */
-	git_apply_hunk_cb hunk_cb;
-
-	/** Payload passed to both delta_cb & hunk_cb. */
-	void *payload;
-
-	/** Bitmask of git_apply_flags_t */
-	unsigned int flags;
-} git_apply_options;
-
-#define GIT_APPLY_OPTIONS_VERSION 1
-#define GIT_APPLY_OPTIONS_INIT {GIT_APPLY_OPTIONS_VERSION}
-
-GIT_EXTERN(int) git_apply_options_init(git_apply_options *opts, unsigned int version);
-
-/**
- * Apply a `git_diff` to a `git_tree`, and return the resulting image
- * as an index.
- *
- * @param out the postimage of the application
- * @param repo the repository to apply
- * @param preimage the tree to apply the diff to
- * @param diff the diff to apply
- * @param options the options for the apply (or null for defaults)
- */
-GIT_EXTERN(int) git_apply_to_tree(
-	git_index **out,
-	git_repository *repo,
-	git_tree *preimage,
-	git_diff *diff,
-	const git_apply_options *options);
-
-/** Possible application locations for git_apply */
-typedef enum {
-	/**
-	 * Apply the patch to the workdir, leaving the index untouched.
-	 * This is the equivalent of `git apply` with no location argument.
-	 */
-	GIT_APPLY_LOCATION_WORKDIR = 0,
-
-	/**
-	 * Apply the patch to the index, leaving the working directory
-	 * untouched.  This is the equivalent of `git apply --cached`.
-	 */
-	GIT_APPLY_LOCATION_INDEX = 1,
-
-	/**
-	 * Apply the patch to both the working directory and the index.
-	 * This is the equivalent of `git apply --index`.
-	 */
-	GIT_APPLY_LOCATION_BOTH = 2,
-} git_apply_location_t;
-
-/**
- * Apply a `git_diff` to the given repository, making changes directly
- * in the working directory, the index, or both.
- *
- * @param repo the repository to apply to
- * @param diff the diff to apply
- * @param location the location to apply (workdir, index or both)
- * @param options the options for the apply (or null for defaults)
- */
-GIT_EXTERN(int) git_apply(
-	git_repository *repo,
-	git_diff *diff,
-	git_apply_location_t location,
-	const git_apply_options *options);
-
-/** @} */
-GIT_END_DECL
-#endif

data/vendor/libgit2/include/git2/cert.h

@@ -1,135 +0,0 @@
-/*
- * Copyright (C) the libgit2 contributors. All rights reserved.
- *
- * This file is part of libgit2, distributed under the GNU GPL v2 with
- * a Linking Exception. For full terms see the included COPYING file.
- */
-#ifndef INCLUDE_git_cert_h__
-#define INCLUDE_git_cert_h__
-
-#include "common.h"
-
-/**
- * @file git2/cert.h
- * @brief Git certificate objects
- * @defgroup git_cert Certificate objects
- * @ingroup Git
- * @{
- */
-GIT_BEGIN_DECL
-
-/**
- * Type of host certificate structure that is passed to the check callback
- */
-typedef enum git_cert_t {
-	/**
-	 * No information about the certificate is available. This may
-	 * happen when using curl.
-	 */
-	GIT_CERT_NONE,
-	/**
-	 * The `data` argument to the callback will be a pointer to
-	 * the DER-encoded data.
-	 */
-	GIT_CERT_X509,
-	/**
-	 * The `data` argument to the callback will be a pointer to a
-	 * `git_cert_hostkey` structure.
-	 */
-	GIT_CERT_HOSTKEY_LIBSSH2,
-	/**
-	 * The `data` argument to the callback will be a pointer to a
-	 * `git_strarray` with `name:content` strings containing
-	 * information about the certificate. This is used when using
-	 * curl.
-	 */
-	GIT_CERT_STRARRAY,
-} git_cert_t;
-
-/**
- * Parent type for `git_cert_hostkey` and `git_cert_x509`.
- */
-struct git_cert {
-	/**
-	 * Type of certificate. A `GIT_CERT_` value.
-	 */
-	git_cert_t cert_type;
-};
-
-/**
- * Callback for the user's custom certificate checks.
- *
- * @param cert The host certificate
- * @param valid Whether the libgit2 checks (OpenSSL or WinHTTP) think
- * this certificate is valid
- * @param host Hostname of the host libgit2 connected to
- * @param payload Payload provided by the caller
- * @return 0 to proceed with the connection, < 0 to fail the connection
- *         or > 0 to indicate that the callback refused to act and that
- *         the existing validity determination should be honored
- */
-typedef int GIT_CALLBACK(git_transport_certificate_check_cb)(git_cert *cert, int valid, const char *host, void *payload);
-
-/**
- * Type of SSH host fingerprint
- */
-typedef enum {
-	/** MD5 is available */
-	GIT_CERT_SSH_MD5 = (1 << 0),
-	/** SHA-1 is available */
-	GIT_CERT_SSH_SHA1 = (1 << 1),
-	/** SHA-256 is available */
-	GIT_CERT_SSH_SHA256 = (1 << 2),
-} git_cert_ssh_t;
-
-/**
- * Hostkey information taken from libssh2
- */
-typedef struct {
-	git_cert parent; /**< The parent cert */
-
-	/**
-	 * A hostkey type from libssh2, either
-	 * `GIT_CERT_SSH_MD5` or `GIT_CERT_SSH_SHA1`
-	 */
-	git_cert_ssh_t type;
-
-	/**
-	 * Hostkey hash. If type has `GIT_CERT_SSH_MD5` set, this will
-	 * have the MD5 hash of the hostkey.
-	 */
-	unsigned char hash_md5[16];
-
-	/**
-	 * Hostkey hash. If type has `GIT_CERT_SSH_SHA1` set, this will
-	 * have the SHA-1 hash of the hostkey.
-	 */
-	unsigned char hash_sha1[20];
-
-	/**
-	 * Hostkey hash. If type has `GIT_CERT_SSH_SHA256` set, this will
-	 * have the SHA-256 hash of the hostkey.
-	 */
-	unsigned char hash_sha256[32];
-} git_cert_hostkey;
-
-/**
- * X.509 certificate information
- */
-typedef struct {
-	git_cert parent; /**< The parent cert */
-
-	/**
-	 * Pointer to the X.509 certificate data
-	 */
-	void *data;
-
-	/**
-	 * Length of the memory block pointed to by `data`.
-	 */
-	size_t len;
-} git_cert_x509;
-
-/** @} */
-GIT_END_DECL
-#endif

data/vendor/libgit2/include/git2/cred.h

@@ -1,308 +0,0 @@
-/*
- * Copyright (C) the libgit2 contributors. All rights reserved.
- *
- * This file is part of libgit2, distributed under the GNU GPL v2 with
- * a Linking Exception. For full terms see the included COPYING file.
- */
-#ifndef INCLUDE_git_cred_h__
-#define INCLUDE_git_cred_h__
-
-#include "common.h"
-
-/**
- * @file git2/cred.h
- * @brief Git authentication & credential management
- * @defgroup git_cred Authentication & credential management
- * @ingroup Git
- * @{
- */
-GIT_BEGIN_DECL
-
-/**
- * Supported credential types
- *
- * This represents the various types of authentication methods supported by
- * the library.
- */
-typedef enum {
-	/**
-	 * A vanilla user/password request
-	 * @see git_cred_userpass_plaintext_new
-	 */
-	GIT_CREDTYPE_USERPASS_PLAINTEXT = (1u << 0),
-
-	/**
-	 * An SSH key-based authentication request
-	 * @see git_cred_ssh_key_new
-	 */
-	GIT_CREDTYPE_SSH_KEY = (1u << 1),
-
-	/**
-	 * An SSH key-based authentication request, with a custom signature
-	 * @see git_cred_ssh_custom_new
-	 */
-	GIT_CREDTYPE_SSH_CUSTOM = (1u << 2),
-
-	/**
-	 * An NTLM/Negotiate-based authentication request.
-	 * @see git_cred_default
-	 */
-	GIT_CREDTYPE_DEFAULT = (1u << 3),
-
-	/**
-	 * An SSH interactive authentication request
-	 * @see git_cred_ssh_interactive_new
-	 */
-	GIT_CREDTYPE_SSH_INTERACTIVE = (1u << 4),
-
-	/**
-	 * Username-only authentication request
-	 *
-	 * Used as a pre-authentication step if the underlying transport
-	 * (eg. SSH, with no username in its URL) does not know which username
-	 * to use.
-	 *
-	 * @see git_cred_username_new
-	 */
-	GIT_CREDTYPE_USERNAME = (1u << 5),
-
-	/**
-	 * An SSH key-based authentication request
-	 *
-	 * Allows credentials to be read from memory instead of files.
-	 * Note that because of differences in crypto backend support, it might
-	 * not be functional.
-	 *
-	 * @see git_cred_ssh_key_memory_new
-	 */
-	GIT_CREDTYPE_SSH_MEMORY = (1u << 6),
-} git_credtype_t;
-
-/**
- * The base structure for all credential types
- */
-typedef struct git_cred git_cred;
-
-typedef struct git_cred_userpass_plaintext git_cred_userpass_plaintext;
-
-/** Username-only credential information */
-typedef struct git_cred_username git_cred_username;
-
-/** A key for NTLM/Kerberos "default" credentials */
-typedef struct git_cred git_cred_default;
-
-/**
- * A ssh key from disk
- */
-typedef struct git_cred_ssh_key git_cred_ssh_key;
-
-/**
- * Keyboard-interactive based ssh authentication
- */
-typedef struct git_cred_ssh_interactive git_cred_ssh_interactive;
-
-/**
- * A key with a custom signature function
- */
-typedef struct git_cred_ssh_custom git_cred_ssh_custom;
-
-/**
- * Credential acquisition callback.
- *
- * This callback is usually involved any time another system might need
- * authentication. As such, you are expected to provide a valid git_cred
- * object back, depending on allowed_types (a git_credtype_t bitmask).
- *
- * Note that most authentication details are your responsibility - this
- * callback will be called until the authentication succeeds, or you report
- * an error. As such, it's easy to get in a loop if you fail to stop providing
- * the same incorrect credentials.
- *
- * @param cred The newly created credential object.
- * @param url The resource for which we are demanding a credential.
- * @param username_from_url The username that was embedded in a "user\@host"
- *                          remote url, or NULL if not included.
- * @param allowed_types A bitmask stating which cred types are OK to return.
- * @param payload The payload provided when specifying this callback.
- * @return 0 for success, < 0 to indicate an error, > 0 to indicate
- *       no credential was acquired
- */
-typedef int GIT_CALLBACK(git_cred_acquire_cb)(
-	git_cred **cred,
-	const char *url,
-	const char *username_from_url,
-	unsigned int allowed_types,
-	void *payload);
-
-/**
- * Free a credential.
- *
- * This is only necessary if you own the object; that is, if you are a
- * transport.
- *
- * @param cred the object to free
- */
-GIT_EXTERN(void) git_cred_free(git_cred *cred);
-
-/**
- * Check whether a credential object contains username information.
- *
- * @param cred object to check
- * @return 1 if the credential object has non-NULL username, 0 otherwise
- */
-GIT_EXTERN(int) git_cred_has_username(git_cred *cred);
-
-/**
- * Return the username associated with a credential object.
- *
- * @param cred object to check
- * @return the credential username, or NULL if not applicable
- */
-GIT_EXTERN(const char *) git_cred_get_username(git_cred *cred);
-
-/**
- * Create a new plain-text username and password credential object.
- * The supplied credential parameter will be internally duplicated.
- *
- * @param out The newly created credential object.
- * @param username The username of the credential.
- * @param password The password of the credential.
- * @return 0 for success or an error code for failure
- */
-GIT_EXTERN(int) git_cred_userpass_plaintext_new(
-	git_cred **out,
-	const char *username,
-	const char *password);
-
-/**
- * Create a "default" credential usable for Negotiate mechanisms like NTLM
- * or Kerberos authentication.
- *
- * @return 0 for success or an error code for failure
- */
-GIT_EXTERN(int) git_cred_default_new(git_cred **out);
-
-/**
- * Create a credential to specify a username.
- *
- * This is used with ssh authentication to query for the username if
- * none is specified in the url.
- */
-GIT_EXTERN(int) git_cred_username_new(git_cred **cred, const char *username);
-
-/**
- * Create a new passphrase-protected ssh key credential object.
- * The supplied credential parameter will be internally duplicated.
- *
- * @param out The newly created credential object.
- * @param username username to use to authenticate
- * @param publickey The path to the public key of the credential.
- * @param privatekey The path to the private key of the credential.
- * @param passphrase The passphrase of the credential.
- * @return 0 for success or an error code for failure
- */
-GIT_EXTERN(int) git_cred_ssh_key_new(
-	git_cred **out,
-	const char *username,
-	const char *publickey,
-	const char *privatekey,
-	const char *passphrase);
-
-/**
- * Create a new ssh key credential object reading the keys from memory.
- *
- * @param out The newly created credential object.
- * @param username username to use to authenticate.
- * @param publickey The public key of the credential.
- * @param privatekey The private key of the credential.
- * @param passphrase The passphrase of the credential.
- * @return 0 for success or an error code for failure
- */
-GIT_EXTERN(int) git_cred_ssh_key_memory_new(
-	git_cred **out,
-	const char *username,
-	const char *publickey,
-	const char *privatekey,
-	const char *passphrase);
-
-/*
- * If the user hasn't included libssh2.h before git2.h, we need to
- * define a few types for the callback signatures.
- */
-#ifndef LIBSSH2_VERSION
-typedef struct _LIBSSH2_SESSION LIBSSH2_SESSION;
-typedef struct _LIBSSH2_USERAUTH_KBDINT_PROMPT LIBSSH2_USERAUTH_KBDINT_PROMPT;
-typedef struct _LIBSSH2_USERAUTH_KBDINT_RESPONSE LIBSSH2_USERAUTH_KBDINT_RESPONSE;
-#endif
-
-typedef void GIT_CALLBACK(git_cred_ssh_interactive_cb)(
-	const char *name,
-	int name_len,
-	const char *instruction, int instruction_len,
-	int num_prompts, const LIBSSH2_USERAUTH_KBDINT_PROMPT *prompts,
-	LIBSSH2_USERAUTH_KBDINT_RESPONSE *responses,
-	void **abstract);
-
-
-/**
- * Create a new ssh keyboard-interactive based credential object.
- * The supplied credential parameter will be internally duplicated.
- *
- * @param username Username to use to authenticate.
- * @param prompt_callback The callback method used for prompts.
- * @param payload Additional data to pass to the callback.
- * @return 0 for success or an error code for failure.
- */
-GIT_EXTERN(int) git_cred_ssh_interactive_new(
-	git_cred **out,
-	const char *username,
-	git_cred_ssh_interactive_cb prompt_callback,
-	void *payload);
-
-/**
- * Create a new ssh key credential object used for querying an ssh-agent.
- * The supplied credential parameter will be internally duplicated.
- *
- * @param out The newly created credential object.
- * @param username username to use to authenticate
- * @return 0 for success or an error code for failure
- */
-GIT_EXTERN(int) git_cred_ssh_key_from_agent(
-	git_cred **out,
-	const char *username);
-
-typedef int GIT_CALLBACK(git_cred_sign_cb)(
-	LIBSSH2_SESSION *session,
-	unsigned char **sig, size_t *sig_len,
-	const unsigned char *data, size_t data_len,
-	void **abstract);
-
-/**
- * Create an ssh key credential with a custom signing function.
- *
- * This lets you use your own function to sign the challenge.
- *
- * This function and its credential type is provided for completeness
- * and wraps `libssh2_userauth_publickey()`, which is undocumented.
- *
- * The supplied credential parameter will be internally duplicated.
- *
- * @param out The newly created credential object.
- * @param username username to use to authenticate
- * @param publickey The bytes of the public key.
- * @param publickey_len The length of the public key in bytes.
- * @param sign_callback The callback method to sign the data during the challenge.
- * @param payload Additional data to pass to the callback.
- * @return 0 for success or an error code for failure
- */
-GIT_EXTERN(int) git_cred_ssh_custom_new(
-	git_cred **out,
-	const char *username,
-	const char *publickey,
-	size_t publickey_len,
-	git_cred_sign_cb sign_callback,
-	void *payload);
-
-/** @} */
-GIT_END_DECL
-#endif