rroonga 7.0.2-x64-mingw32 → 7.1.1-x64-mingw32

data/vendor/local/share/doc/groonga/ja/html/_sources/tutorial/network.txt

@@ -1,64 +0,0 @@
-.. -*- rst -*-
-
-.. highlightlang:: none
-
-.. groonga-include : introduction.rst
-
-.. groonga-command
-.. database: tutorial
-
-Remote access
-=============
-
-You can use Groonga as a server which allows remote access. Groonga supports the original protocol (GQTP), the memcached binary protocol and HTTP.
-
-Hypertext transfer protocol (HTTP)
------------------------------------
-
-How to run an HTTP server
-^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Groonga supports the hypertext transfer protocol (HTTP). The following form shows how to run Groonga as an HTTP server daemon.
-
-Form::
-
-  groonga [-p PORT_NUMBER] -d --protocol http DB_PATH
-
-The `--protocol` option and its argument specify the protocol of the server. "http" specifies to use HTTP. If the `-p` option is not specified, Groonga uses the default port number 10041.
-
-The following command runs an HTTP server that listens on the port number 80.
-
-Execution example::
-
-  % sudo groonga -p 80 -d --protocol http /tmp/groonga-databases/introduction.db
-  %
-
-.. note::
-   You must have root privileges if you listen on the port number 80 (well known port).
-   There is no such a limitation about the port number 1024 or over.
-
-How to send a command to an HTTP server
-^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-You can send a command to an HTTP server by sending a GET request to /d/COMMAND_NAME. Command parameters can be passed as parameters of the GET request. The format is "?NAME_1=VALUE_1&NAME_2=VALUE_2&...".
-
-The following example shows how to send commands to an HTTP server.
-
-.. groonga-command
-.. include:: ../example/tutorial/network-3.log
-.. .. http://HOST_NAME_OR_IP_ADDRESS[:PORT_NUMBER]/d/status
-.. .. Executed command:
-.. status
-.. .. http://HOST_NAME_OR_IP_ADDRESS[:PORT_NUMBER]/d/select?table=Site&query=title:@this
-.. .. Executed command:
-.. select --table Site --query title:@this
-
-Administration tool (HTTP)
---------------------------
-
-An HTTP server of Groonga provides a browser based administration tool that makes database management easy. After starting an HTTP server, you can use the administration tool by accessing http://HOST_NAME_OR_IP_ADDRESS[:PORT_NUMBER]/. Note that Javascript must be enabled for the tool to work properly.
-
-Security issues
----------------
-
-Groonga servers don't support user authentication. Everyone can view and modify databases hosted by Groonga servers. You are recommended to restrict IP addresses that can access Groonga servers. You can use iptables or similar for this purpose.

data/vendor/local/share/doc/groonga/ja/html/_sources/tutorial/patricia_trie.txt

@@ -1,58 +0,0 @@
-.. -*- rst -*-
-
-.. highlightlang:: none
-
-.. groonga-command
-.. database: tutorial-patricia-trie
-
-Prefix search with patricia trie
-================================
-
-Groonga supports to create a table with patricia trie option.
-By specifying it, You can do prefix search.
-
-And more, you can do suffix search against primary key by specifying additional option.
-
-Prefix search by primary key
-----------------------------
-
-table_create command which uses TABLE_PAT_KEY for flags option supports prefix search by primary key.
-
-.. groonga-command
-.. include:: ../example/tutorial/patricia_trie_prefix_search.log
-..
-.. table_create --name PatPrefix --flags TABLE_PAT_KEY --key_type ShortText
-.. load --table PatPrefix
-.. [
-.. {"_key":"James"}
-.. {"_key":"Jason"}
-.. {"_key":"Jennifer"},
-.. {"_key":"Jeff"},
-.. {"_key":"John"},
-.. {"_key":"Joseph"},
-.. ]
-.. select --table PatPrefix --query _key:^Je
-
-Suffix search by primary key
-----------------------------
-
-table_create command which uses TABLE_PAT_KEY and KEY_WITH_SIS for flags option supports prefix search and suffix search by primary key.
-
-If you set KEY_WITH_SIS flag, suffix search records also are added when you add the data. So if you search simply, the automatically added records are hit in addition to the original records. In order to search only the original records, you need a plan.
-
-For example, in order to make this distinction between the original records and automatically added records, add the original column indicating that it is the original record, and add original column is ``true`` to the search condition. For attention, use ``--filter`` option because ``--query`` option is not specify ``Bool`` type value intuitively.
-
-.. groonga-command
-.. include:: ../example/tutorial/patricia_trie-2.log
-..
-.. table_create --name PatSuffix --flags TABLE_PAT_KEY|KEY_WITH_SIS --key_type ShortText
-.. column_create --table PatSuffix --name original --type Bool
-.. load --table PatSuffix
-.. [
-.. {"_key":"ひろゆき","original":true},
-.. {"_key":"まろゆき","original":true},
-.. {"_key":"ひろあき","original":true},
-.. {"_key":"ゆきひろ","original":true}
-.. ]
-.. select --table PatSuffix --query _key:$ゆき
-.. select --table PatSuffix --filter '_key @$ "ゆき" && original == true'

data/vendor/local/share/doc/groonga/ja/html/_sources/tutorial/query_expansion.txt

@@ -1,69 +0,0 @@
-.. -*- rst -*-
-
-.. highlightlang:: none
-
-.. groonga-command
-.. database: tutorial-query-expansion
-
-Query expansion
-===============
-
-Groonga accepts ``query_expander`` parameter for :doc:`/reference/commands/select` command.
-It enables you to extend your query string.
-
-For example, if user searches "theatre" instead of "theater",
-query expansion enables to return search results of "theatre OR theater".
-This kind of way reduces search leakages. This is what really user wants.
-
-Preparation
------------
-
-To use query expansion, you need to create table which stores documents, synonym table which stores query string and replacement string.
-In synonym table, primary key represents original string, the column of ShortText represents modified string.
-
-.. TODO: 文字列型のベクターカラムでも可能であり、その場合は各要素をORでつなげたものに置換されるということを記述する。
-
-Let's create document table and synonym table.
-
-.. groonga-command
-.. include:: ../example/tutorial/query_expansion-1.log
-.. table_create Doc TABLE_PAT_KEY ShortText
-.. column_create Doc body COLUMN_SCALAR ShortText
-.. table_create Term TABLE_PAT_KEY ShortText --default_tokenizer TokenBigram --normalizer NormalizerAuto
-.. column_create Term Doc_body COLUMN_INDEX|WITH_POSITION Doc body
-.. table_create Synonym TABLE_PAT_KEY ShortText
-.. column_create Synonym body COLUMN_VECTOR ShortText
-.. load --table Doc
-.. [
-.. {"_key": "001", "body": "Play all night in this theater."},
-.. {"_key": "002", "body": "theatre is British spelling."},
-.. ]
-.. load --table Synonym
-.. [
-.. {"_key": "theater", "body": ["theater", "theatre"]},
-.. {"_key": "theatre", "body": ["theater", "theatre"]},
-.. ]
-
-In this case, it doesn't occur search leakage because it creates synonym table which accepts "theatre" and "theater" as query string.
-
-Search
-------
-
-Then, let's use prepared synonym table.
-First, use select command without ``query_expander`` parameter.
-
-.. groonga-command
-.. include:: ../example/tutorial/query_expansion-2.log
-.. select Doc --match_columns body --query "theater"
-.. select Doc --match_columns body --query "theatre"
-
-Above query returns the record which completely equal to query string.
-
-Then, use ``query_expander`` parameter against ``body`` column of ``Synonym`` table.
-
-.. groonga-command
-.. include:: ../example/tutorial/query_expansion-3.log
-.. select Doc --match_columns body --query "theater" --query_expander Synonym.body
-.. select Doc --match_columns body --query "theatre" --query_expander Synonym.body
-
-In which cases, query string is replaced to "(theater OR theatre)", thus synonym is considered for full text search.

data/vendor/local/share/doc/groonga/ja/html/_sources/tutorial/search.txt

@@ -1,123 +0,0 @@
-.. -*- rst -*-
-
-.. highlightlang:: none
-
-.. groonga-include : data.rst
-
-.. groonga-command
-.. database: tutorial
-
-Various search conditions
-=========================
-
-Groonga supports to narrow down by using syntax like JavaScript, sort by the calculated value. Additionally, Groonga also supports to narrow down & sort search results by using location information (latitude & longitude).
-
-Narrow down & Full-text search by using syntax like JavaScript
---------------------------------------------------------------
-
-The ``filter`` parameter of ``select`` command accepts the search condition.
-There is one difference between ``filter`` parameter and ``query`` parameter, you need to specify the condition by syntax like JavaScript for ``filter`` parameter.
-
-.. groonga-command
-.. include:: ../example/tutorial/search-1.log
-.. select --table Site --filter "_id <= 1" --output_columns _id,_key
-
-See the detail of above query. Here is the condition which is specified as ``filter`` parameter::
-
-  _id <= 1
-
-In this case, this query returns the records which meets the condition that the value of ``_id`` is equal to or less than 1.
-
-Moreover, you can use ``&&`` for AND search, ``||`` for OR search.
-
-.. groonga-command
-.. include:: ../example/tutorial/search-2.log
-.. select --table Site --filter "_id >= 4 && _id <= 6" --output_columns _id,_key
-.. select --table Site --filter "_id <= 2 || _id >= 7" --output_columns _id,_key
-
-If you specify ``query`` parameter and ``filter`` parameter at the same time, you can get the records which meets both of the condition as a result.
-
-Sort by using ``scorer``
-------------------------
-
-``select`` command accepts ``scorer`` parameter which is used to process each record of full-text search results.
-
-This parameter accepts the conditions which is specified by syntax like JavaScript as same as ``filter`` parameter.
-
-.. groonga-command
-.. include:: ../example/tutorial/search-3.log
-.. select --table Site --filter "true" --scorer "_score = rand()" --output_columns _id,_key,_score --sortby _score
-.. select --table Site --filter "true" --scorer "_score = rand()" --output_columns _id,_key,_score --sortby _score
-
-'_score' is one of a pseudo column. The score of full-text search is assigned to it.
-See :doc:`/reference/columns/pseudo` about '_score' column.
-
-In the above query, the condition of ``scorer`` parameter is::
-
-  _score = rand()
-
-In this case, the score of full-text search is overwritten by the value of rand() function.
-
-The condition of ``sortby`` parameter is::
-
-  _score
-
-This means that sorting the search result by ascending order.
-
-As a result, the order of search result is randomized.
-
-Narrow down & sort by using location information
-------------------------------------------------
-
-Groonga supports to store location information (Longitude & Latitude) and not only narrow down but also sort by using it.
-
-Groonga supports two kind of column types to store location information. One is ``TokyoGeoPoint``, the other is ``WGS84GeoPoint``. ``TokyoGeoPoint`` is used for Japan geodetic system. ``WGS84GeoPoint`` is used for world geodetic system.
-
-Specify longitude and latitude as follows:
-
-* "[latitude in milliseconds]x[longitude in milliseconds]"（e.g.: "128452975x503157902"）
-* "[latitude in milliseconds],[longitude in milliseconds]"（e.g.: "128452975,503157902"）
-* "[latitude in degrees]x[longitude in degrees]"（e.g.: "35.6813819x139.7660839"）
-* "[latitude in degrees],[longitude in degrees]"（e.g.: "35.6813819,139.7660839"）
-
-Let's store two location information about station in Japan by WGS. One is Tokyo station, the other is Shinjyuku station. Both of them are station in Japan. The latitude of Tokyo station is 35 degrees 40 minutes 52.975 seconds, the longitude of Tokyo station is 139 degrees 45 minutes 57.902 seconds. The latitude of Shinjyuku station is  35 degrees 41 minutes  27.316 seconds, the longitude of Shinjyuku station is 139 degrees 42 minutes 0.929 seconds. Thus, location information in milliseconds are "128452975x503157902" and "128487316x502920929" respectively. location information in degrees are  "35.6813819x139.7660839" and "35.6909211x139.7002581" respectively.
-
-Let's register location information in milliseconds.
-
-.. groonga-command
-.. include:: ../example/tutorial/search-4.log
-.. column_create --table Site --name location --type WGS84GeoPoint
-.. load --table Site
-.. [
-..  {"_key":"http://example.org/","location":"128452975x503157902"}
-..  {"_key":"http://example.net/","location":"128487316x502920929"},
-.. ]
-.. select --table Site --query "_id:1 OR _id:2" --output_columns _key,location
-
-Then assign the value of geo distance which is calculated by :doc:`/reference/functions/geo_distance` function to ``scorer`` parameter.
-
-Let's show geo distance from Akihabara station in Japan. In world geodetic system, the latitude of Akihabara station is  35 degrees 41 minutes 55.259 seconds, the longitude of Akihabara station is 139 degrees 46 minutes 27.188 seconds. Specify "128515259x503187188" for geo_distance function.
-
-.. groonga-command
-.. include:: ../example/tutorial/search-5.log
-.. select --table Site --query "_id:1 OR _id:2" --output_columns _key,location,_score --scorer '_score = geo_distance(location, "128515259x503187188")'
-
-As you can see, the geo distance between Tokyo station and Akihabara station is 2054 meters, the geo distance between Akihabara station and Shinjyuku station is 6720 meters.
-
-The return value of geo_distance function is also used for sorting by specifying pseudo ``_score`` column to ``sortby`` parameter.
-
-.. groonga-command
-.. include:: ../example/tutorial/search-6.log
-.. select --table Site --query "_id:1 OR _id:2" --output_columns _key,location,_score --scorer '_score = geo_distance(location, "128515259x503187188")' --sortby -_score
-
-Groonga also supports to narrow down by "a certain point within specified meters".
-
-In such a case, use :doc:`/reference/functions/geo_in_circle` function in ``filter`` parameter.
-
-For example, search the records which exists within 5000 meters from Akihabara station.
-
-.. groonga-command
-.. include:: ../example/tutorial/search-7.log
-.. select --table Site --output_columns _key,location --filter 'geo_in_circle(location, "128515259x503187188", 5000)'
-
-There is :doc:`/reference/functions/geo_in_rectangle` function which is used to search a certain point within specified region.