rroonga 7.0.2-x64-mingw32 → 7.1.1-x64-mingw32

data/vendor/local/share/doc/groonga/ja/html/_sources/install/mac_os_x.txt

@@ -1,66 +0,0 @@
-.. -*- rst -*-
-
-.. highlightlang:: none
-
-Mac OS X
-========
-
-This section describes how to install Groonga on Mac OS X. You can
-install Groonga by `MacPorts <http://www.macports.org/>`__ or
-`Homebrew <http://mxcl.github.com/homebrew/>`__.
-
-.. _macports:
-
-MacPorts
---------
-
-Install::
-
-  % sudo port install groonga
-
-.. _homebrew:
-
-Homebrew
---------
-
-Install::
-
-  % brew install groonga
-
-If you want to use `MeCab <http://mecab.sourceforge.net/>`_ as a
-tokenizer, specify ``--with-mecab`` option::
-
-  % brew install groonga --with-mecab
-
-Then install and configure MeCab dictionary.
-
-Install::
-
-  % brew install mecab-ipadic
-
-Configure::
-
-  % sed -i '' -e 's,dicrc.*=.*,dicrc = /usr/local/lib/mecab/dic/ipadic,g' /usr/local/etc/mecabrc
-
-Build from source
------------------
-
-Install `Xcode <https://developer.apple.com/xcode/>`_.
-
-Download source::
-
-  % curl -O https://packages.groonga.org/source/groonga/groonga-7.0.2.tar.gz
-  % tar xvzf groonga-7.0.2.tar.gz
-  % cd groonga-7.0.2
-
-Configure (see :ref:`source-configure` about ``configure`` options)::
-
-  % ./configure
-
-Build::
-
-  % make -j$(/usr/sbin/sysctl -n hw.ncpu)
-
-Install::
-
-  % sudo make install

data/vendor/local/share/doc/groonga/ja/html/_sources/install/others.txt

@@ -1,273 +0,0 @@
-.. -*- rst -*-
-
-.. highlightlang:: none
-
-Others
-======
-
-This section describes how to install Groonga from source on UNIX like
-environment.
-
-To get more detail about installing Groonga from source on the
-specific environment, find the document for the specific environment
-from :doc:`/install`.
-
-Dependencies
-------------
-
-Groonga doesn't require any special libraries but requires some tools
-for build.
-
-Tools
-^^^^^
-
-Here are required tools:
-
-  * ``wget``, ``curl`` or Web browser for downloading source archive
-  * ``tar`` and ``gzip`` for extracting source archive
-  * shell
-    (many shells such as ``dash``, ``bash`` and ``zsh`` will work)
-  * C compiler and C++ compiler
-    (``gcc`` and ``g++`` are supported but other compilers may work)
-  * ``make`` (GNU make is supported but other make like BSD make will work)
-
-You must get them ready.
-
-You can use `CMake <http://www.cmake.org/>`_ instead of shell but this
-document doesn't describe about building with CMake.
-
-Here are optional tools:
-
-  * `pkg-config
-    <http://www.freedesktop.org/wiki/Software/pkg-config>`_ for
-    detecting libraries
-  * `sudo <http://www.gratisoft.us/sudo/>`_ for installing built
-    Groonga
-
-You must get them ready if you want to use optional libraries.
-
-Libraries
-^^^^^^^^^
-
-All libraries are optional. Here are optional libraries:
-
-  * `MeCab <http://mecab.sourceforge.net/>`_ for tokenizing full-text
-    search target document by morphological analysis
-  * `KyTea <http://www.phontron.com/kytea/>`_ for tokenizing full-text
-    search target document by morphological analysis
-  * `ZeroMQ <http://www.zeromq.org/>`_ for :doc:`/reference/suggest`
-  * `libevent <http://libevent.org/>`_ for :doc:`/reference/suggest`
-  * `MessagePack <http://msgpack.org/>`_ for supporting MessagePack
-    output and :doc:`/reference/suggest`
-  * `libedit <http://www.thrysoee.dk/editline/>`_ for command line
-    editing in :doc:`/reference/executables/groonga`
-  * `zlib <http://zlib.net/>`_ for compressing column value
-  * `LZ4 <https://lz4.github.io/lz4/>`_ for compressing
-    column value
-  * `Zstandard <https://facebook.github.io/zstd/>`_ for compressing
-    column value
-
-If you want to use those all or some libraries, you need to install
-them before installing Groonga.
-
-Build from source
------------------
-
-Groonga uses GNU build system. So the following is the simplest build
-steps::
-
-  % wget https://packages.groonga.org/source/groonga/groonga-7.0.2.tar.gz
-  % tar xvzf groonga-7.0.2.tar.gz
-  % cd groonga-7.0.2
-  % ./configure
-  % make
-  % sudo make install
-
-After the above steps, :doc:`/reference/executables/groonga` is found in
-``/usr/local/bin/groonga``.
-
-The default build will work well but you can customize Groonga at
-``configure`` step.
-
-The following describes details about each step.
-
-.. _source-configure:
-
-``configure``
-^^^^^^^^^^^^^
-
-First, you need to run ``configure``. Here are important ``configure``
-options:
-
-``--prefix=PATH``
-+++++++++++++++++
-
-Specifies the install base directory. Groonga related files are
-installed under ``${PATH}/`` directory.
-
-The default is ``/usr/local``. In this case, :doc:`/reference/executables/groonga` is
-installed into ``/usr/local/bin/groonga``.
-
-Here is an example that installs Groonga into ``~/local`` for an user
-use instead of system wide use::
-
-  % ./configure --prefix=$HOME/local
-
-``--localstatedir=PATH``
-++++++++++++++++++++++++
-
-Specifies the base directory to place modifiable file such as log
-file, PID file and database files. For example, log file is placed at
-``${PATH}/log/groonga.log``.
-
-The default is ``/usr/local/var``.
-
-Here is an example that system wide ``/var`` is used for modifiable
-files::
-
-  % ./configure --localstatedir=/var
-
-``--with-log-path=PATH``
-++++++++++++++++++++++++
-
-Specifies the default log file path. You can override the default log
-path is :doc:`/reference/executables/groonga` command's ``--log-path``
-command line option. So this option is not critical build option. It's
-just for convenient.
-
-The default is ``/usr/local/var/log/groonga.log``. The
-``/usr/local/var`` part is changed by ``--localstatedir`` option.
-
-Here is an example that log file is placed into shared NFS directory
-``/nfs/log/groonga.log``::
-
-  % ./configure --with-log-path=/nfs/log/groonga.log
-
-``--with-default-encoding=ENCODING``
-++++++++++++++++++++++++++++++++++++
-
-Specifies the default encoding. Available encodings are ``euc_jp``,
-``sjis``, ``utf8``, ``latin1``, ``koi8r`` and ``none``.
-
-The default is ``utf8``.
-
-Here is an example that Shift_JIS is used as the default encoding::
-
-  % ./configure --with-default-encoding=sjis
-
-.. _install-configure-with-match-escalation-threshold:
-
-``--with-match-escalation-threshold=NUMBER``
-++++++++++++++++++++++++++++++++++++++++++++
-
-Specifies the default match escalation threshold. See
-:ref:`select-match-escalation-threshold` about match
-escalation threshold. -1 means that match operation never escalate.
-
-The default is 0.
-
-Here is an example that match escalation isn't used by default::
-
-  % ./configure --with-match-escalation-threshold=-1
-
-``--with-zlib``
-+++++++++++++++
-
-Enables column value compression by zlib.
-
-The default is disabled.
-
-Here is an example that enables column value compression by zlib::
-
-  % ./configure --with-zlib
-
-``--with-lz4``
-++++++++++++++
-
-Enables column value compression by LZ4.
-
-The default is disabled.
-
-Here is an example that enables column value compression by LZ4::
-
-  % ./configure --with-lz4
-
-``--with-message-pack=MESSAGE_PACK_INSTALL_PREFIX``
-+++++++++++++++++++++++++++++++++++++++++++++++++++
-
-Specifies where MessagePack is installed. If MessagePack isn't
-installed with ``--prefix=/usr``, you need to specify this option with
-path that you use for building MessagePack.
-
-If you installed MessagePack with ``--prefix=$HOME/local`` option, you
-should specify ``--with-message-pack=$HOME/local`` to Groonga's
-``configure``.
-
-The default is ``/usr``.
-
-Here is an example that uses MessagePack built with
-``--prefix=$HOME/local`` option::
-
-  % ./configure --with-message-pack=$HOME/local
-
-``--with-munin-plugins``
-++++++++++++++++++++++++
-
-Installs Munin plugins for Groonga. They are installed into
-``${PREFIX}/share/groonga/munin/plugins/``.
-
-Those plugins are not installed by default.
-
-Here is an example that installs Munin plugins for Groonga::
-
-  % ./configure --with-munin-plugins
-
-``--with-package-platform=PLATFORM``
-++++++++++++++++++++++++++++++++++++
-
-Installs platform specific system management files such as init
-script. Available platforms are ``centos``, ``centos5``, ``centos6``,
-``centos7`` and ``fedora``. Platform starts with ``centos`` are for
-Red Hat and Red Hat clone distributions such as CentOS. If ``centos``
-is specified, distribution version is guessed. ``fedora`` is for
-Fedora.
-
-Those system management files are not installed by default.
-
-Here is an example that installs CentOS specific system management
-files::
-
-  % ./configure --with-package-platform=centos
-
-``--help``
-++++++++++
-
-Shows all ``configure`` options.
-
-``make``
-^^^^^^^^
-
-``configure`` is succeeded, you can build Groonga by ``make``::
-
-  % make
-
-If you have multi cores CPU, you can make faster by using ``-j``
-option. If you have 4 cores CPU, it's good for using ``-j4`` option::
-
-  % make -j4
-
-If you get some errors by ``make``, please report them to us:
-:doc:`/contribution/report`
-
-``make install``
-^^^^^^^^^^^^^^^^
-
-Now, you can install built Groonga!::
-
-  % sudo make install
-
-If you have write permission for ``${PREFIX}``, you don't need to use
-``sudo``. e.g. ``--prefix=$HOME/local`` case. In this case, use ``make
-install``::
-
-  % make install

data/vendor/local/share/doc/groonga/ja/html/_sources/install/solaris.txt

@@ -1,43 +0,0 @@
-.. -*- rst -*-
-
-.. highlightlang:: none
-
-Oracle Solaris
-==============
-
-This section describes how to install Groonga from source on Oracle
-Solaris.
-
-Oracle Solaris 11
------------------
-
-Install required packages to build Groonga::
-
-  % sudo pkg install gnu-tar gcc-45 system/header
-
-Download source::
-
-  % wget https://packages.groonga.org/source/groonga/groonga-7.0.2.tar.gz
-  % gtar xvzf groonga-7.0.2.tar.gz
-  % cd groonga-7.0.2
-
-Configure with ``CFLAGS="-m64" CXXFLAGS="-m64"`` variables. They are
-needed for building 64-bit version. To build 32-bit version, just
-remove those variables. (see :ref:`source-configure` about ``configure``
-options)::
-
-  % ./configure CFLAGS="-m64" CXXFLAGS="-m64"
-
-Build::
-
-  % make
-
-..
-   Build with multi processes. ( ``% sudo pkg install gnu-make`` is
-   required)::
-
-      % gmake -j$(psrinfo -p)
-
-Install::
-
-  % sudo make install

data/vendor/local/share/doc/groonga/ja/html/_sources/install/ubuntu.txt

@@ -1,99 +0,0 @@
-.. -*- rst -*-
-
-.. highlightlang:: none
-
-Ubuntu
-======
-
-This section describes how to install Groonga related deb packages on
-Ubuntu. You can install them by ``apt``.
-
-We distribute both 32-bit and 64-bit packages but we strongly
-recommend a 64-bit package for server. You should use a 32-bit package
-just only for tests or development. You will encounter an out of
-memory error with a 32-bit package even if you just process medium
-size data.
-
-PPA (Personal Package Archive)
-------------------------------
-
-The Groonga APT repository for Ubuntu uses PPA (Personal Package
-Archive) on Launchpad. You can install Groonga by APT from the PPA.
-
-Here are supported Ubuntu versions:
-
-  * 14.04 LTS Trusty Tahr
-  * 16.04 LTS Xenial Xerus
-  * 16.10 Yakkety Yak
-
-
-Enable the universe repository to install Groonga::
-
-  % sudo apt-get -y install software-properties-common
-  % sudo add-apt-repository -y universe
-
-Add the ``ppa:groonga/ppa`` PPA to your system::
-
-  % sudo add-apt-repository -y ppa:groonga/ppa
-  % sudo apt-get update
-
-Install::
-
-  % sudo apt-get -y install groonga
-
-.. include:: server-use.inc
-
-If you want to use `MeCab <http://mecab.sourceforge.net/>`_ as a
-tokenizer, install groonga-tokenizer-mecab package.
-
-Install groonga-tokenizer-mecab package::
-
-  % sudo apt-get -y install groonga-tokenizer-mecab
-
-If you want to use ``TokenFilterStem`` as a token filter, install
-groonga-token-filter-stem package.
-
-Install groonga-token-filter-stem package::
-
-  % sudo apt-get -y install groonga-token-filter-stem
-
-There is a package that provides `Munin
-<http://munin-monitoring.org/>`_ plugins. If you want to monitor
-Groonga status by Munin, install groonga-munin-plugins package.
-
-Install groonga-munin-plugins package::
-
-  % sudo apt-get -y install groonga-munin-plugins
-
-There is a package that provides MySQL compatible normalizer as
-a Groonga plugin.
-If you want to use that one, install groonga-normalizer-mysql package.
-
-Install groonga-normalizer-mysql package::
-
-  % sudo apt-get -y install groonga-normalizer-mysql
-
-Build from source
------------------
-
-Install required packages to build Groonga::
-
-  % sudo apt-get -V -y install wget tar build-essential zlib1g-dev liblzo2-dev libmsgpack-dev libzmq-dev libevent-dev libmecab-dev
-
-Download source::
-
-  % wget https://packages.groonga.org/source/groonga/groonga-7.0.2.tar.gz
-  % tar xvzf groonga-7.0.2.tar.gz
-  % cd groonga-7.0.2
-
-Configure (see :ref:`source-configure` about ``configure`` options)::
-
-  % ./configure
-
-Build::
-
-  % make -j$(grep '^processor' /proc/cpuinfo | wc -l)
-
-Install::
-
-  % sudo make install