ric 0.14.2 → 0.14.6

data/vendor/bundle/ruby/2.7.0/gems/concurrent-ruby-1.1.9/lib/concurrent-ruby/concurrent/atomic/reentrant_read_write_lock.rb

@@ -1,379 +0,0 @@
-require 'thread'
-require 'concurrent/atomic/atomic_reference'
-require 'concurrent/errors'
-require 'concurrent/synchronization'
-require 'concurrent/atomic/thread_local_var'
-
-module Concurrent
-
-  # Re-entrant read-write lock implementation
-  #
-  # Allows any number of concurrent readers, but only one concurrent writer
-  # (And while the "write" lock is taken, no read locks can be obtained either.
-  # Hence, the write lock can also be called an "exclusive" lock.)
-  #
-  # If another thread has taken a read lock, any thread which wants a write lock
-  # will block until all the readers release their locks. However, once a thread
-  # starts waiting to obtain a write lock, any additional readers that come along
-  # will also wait (so writers are not starved).
-  #
-  # A thread can acquire both a read and write lock at the same time. A thread can
-  # also acquire a read lock OR a write lock more than once. Only when the read (or
-  # write) lock is released as many times as it was acquired, will the thread
-  # actually let it go, allowing other threads which might have been waiting
-  # to proceed. Therefore the lock can be upgraded by first acquiring
-  # read lock and then write lock and that the lock can be downgraded by first
-  # having both read and write lock a releasing just the write lock.
-  #
-  # If both read and write locks are acquired by the same thread, it is not strictly
-  # necessary to release them in the same order they were acquired. In other words,
-  # the following code is legal:
-  #
-  # @example
-  #   lock = Concurrent::ReentrantReadWriteLock.new
-  #   lock.acquire_write_lock
-  #   lock.acquire_read_lock
-  #   lock.release_write_lock
-  #   # At this point, the current thread is holding only a read lock, not a write
-  #   # lock. So other threads can take read locks, but not a write lock.
-  #   lock.release_read_lock
-  #   # Now the current thread is not holding either a read or write lock, so
-  #   # another thread could potentially acquire a write lock.
-  #
-  # This implementation was inspired by `java.util.concurrent.ReentrantReadWriteLock`.
-  #
-  # @example
-  #   lock = Concurrent::ReentrantReadWriteLock.new
-  #   lock.with_read_lock  { data.retrieve }
-  #   lock.with_write_lock { data.modify! }
-  #
-  # @see http://docs.oracle.com/javase/7/docs/api/java/util/concurrent/locks/ReentrantReadWriteLock.html java.util.concurrent.ReentrantReadWriteLock
-  class ReentrantReadWriteLock < Synchronization::Object
-
-    # Implementation notes:
-    #
-    # A goal is to make the uncontended path for both readers/writers mutex-free
-    # Only if there is reader-writer or writer-writer contention, should mutexes be used
-    # Otherwise, a single CAS operation is all we need to acquire/release a lock
-    #
-    # Internal state is represented by a single integer ("counter"), and updated
-    #   using atomic compare-and-swap operations
-    # When the counter is 0, the lock is free
-    # Each thread which has one OR MORE read locks increments the counter by 1
-    #   (and decrements by 1 when releasing the read lock)
-    # The counter is increased by (1 << 15) for each writer waiting to acquire the
-    #   write lock, and by (1 << 29) if the write lock is taken
-    #
-    # Additionally, each thread uses a thread-local variable to count how many times
-    #   it has acquired a read lock, AND how many times it has acquired a write lock.
-    # It uses a similar trick; an increment of 1 means a read lock was taken, and
-    #   an increment of (1 << 15) means a write lock was taken
-    # This is what makes re-entrancy possible
-    #
-    # 2 rules are followed to ensure good liveness properties:
-    # 1) Once a writer has queued up and is waiting for a write lock, no other thread
-    #    can take a lock without waiting
-    # 2) When a write lock is released, readers are given the "first chance" to wake
-    #    up and acquire a read lock
-    # Following these rules means readers and writers tend to "take turns", so neither
-    #   can starve the other, even under heavy contention
-
-    # @!visibility private
-    READER_BITS    = 15
-    # @!visibility private
-    WRITER_BITS    = 14
-
-    # Used with @Counter:
-    # @!visibility private
-    WAITING_WRITER = 1 << READER_BITS
-    # @!visibility private
-    RUNNING_WRITER = 1 << (READER_BITS + WRITER_BITS)
-    # @!visibility private
-    MAX_READERS    = WAITING_WRITER - 1
-    # @!visibility private
-    MAX_WRITERS    = RUNNING_WRITER - MAX_READERS - 1
-
-    # Used with @HeldCount:
-    # @!visibility private
-    WRITE_LOCK_HELD = 1 << READER_BITS
-    # @!visibility private
-    READ_LOCK_MASK  = WRITE_LOCK_HELD - 1
-    # @!visibility private
-    WRITE_LOCK_MASK = MAX_WRITERS
-
-    safe_initialization!
-
-    # Create a new `ReentrantReadWriteLock` in the unlocked state.
-    def initialize
-      super()
-      @Counter    = AtomicFixnum.new(0)       # single integer which represents lock state
-      @ReadQueue  = Synchronization::Lock.new # used to queue waiting readers
-      @WriteQueue = Synchronization::Lock.new # used to queue waiting writers
-      @HeldCount  = ThreadLocalVar.new(0)     # indicates # of R & W locks held by this thread
-    end
-
-    # Execute a block operation within a read lock.
-    #
-    # @yield the task to be performed within the lock.
-    #
-    # @return [Object] the result of the block operation.
-    #
-    # @raise [ArgumentError] when no block is given.
-    # @raise [Concurrent::ResourceLimitError] if the maximum number of readers
-    #   is exceeded.
-    def with_read_lock
-      raise ArgumentError.new('no block given') unless block_given?
-      acquire_read_lock
-      begin
-        yield
-      ensure
-        release_read_lock
-      end
-    end
-
-    # Execute a block operation within a write lock.
-    #
-    # @yield the task to be performed within the lock.
-    #
-    # @return [Object] the result of the block operation.
-    #
-    # @raise [ArgumentError] when no block is given.
-    # @raise [Concurrent::ResourceLimitError] if the maximum number of readers
-    #   is exceeded.
-    def with_write_lock
-      raise ArgumentError.new('no block given') unless block_given?
-      acquire_write_lock
-      begin
-        yield
-      ensure
-        release_write_lock
-      end
-    end
-
-    # Acquire a read lock. If a write lock is held by another thread, will block
-    # until it is released.
-    #
-    # @return [Boolean] true if the lock is successfully acquired
-    #
-    # @raise [Concurrent::ResourceLimitError] if the maximum number of readers
-    #   is exceeded.
-    def acquire_read_lock
-      if (held = @HeldCount.value) > 0
-        # If we already have a lock, there's no need to wait
-        if held & READ_LOCK_MASK == 0
-          # But we do need to update the counter, if we were holding a write
-          #   lock but not a read lock
-          @Counter.update { |c| c + 1 }
-        end
-        @HeldCount.value = held + 1
-        return true
-      end
-
-      while true
-        c = @Counter.value
-        raise ResourceLimitError.new('Too many reader threads') if max_readers?(c)
-
-        # If a writer is waiting OR running when we first queue up, we need to wait
-        if waiting_or_running_writer?(c)
-          # Before going to sleep, check again with the ReadQueue mutex held
-          @ReadQueue.synchronize do
-            @ReadQueue.ns_wait if waiting_or_running_writer?
-          end
-          # Note: the above 'synchronize' block could have used #wait_until,
-          #   but that waits repeatedly in a loop, checking the wait condition
-          #   each time it wakes up (to protect against spurious wakeups)
-          # But we are already in a loop, which is only broken when we successfully
-          #   acquire the lock! So we don't care about spurious wakeups, and would
-          #   rather not pay the extra overhead of using #wait_until
-
-          # After a reader has waited once, they are allowed to "barge" ahead of waiting writers
-          # But if a writer is *running*, the reader still needs to wait (naturally)
-          while true
-            c = @Counter.value
-            if running_writer?(c)
-              @ReadQueue.synchronize do
-                @ReadQueue.ns_wait if running_writer?
-              end
-            elsif @Counter.compare_and_set(c, c+1)
-              @HeldCount.value = held + 1
-              return true
-            end
-          end
-        elsif @Counter.compare_and_set(c, c+1)
-          @HeldCount.value = held + 1
-          return true
-        end
-      end
-    end
-
-    # Try to acquire a read lock and return true if we succeed. If it cannot be
-    # acquired immediately, return false.
-    #
-    # @return [Boolean] true if the lock is successfully acquired
-    def try_read_lock
-      if (held = @HeldCount.value) > 0
-        if held & READ_LOCK_MASK == 0
-          # If we hold a write lock, but not a read lock...
-          @Counter.update { |c| c + 1 }
-        end
-        @HeldCount.value = held + 1
-        return true
-      else
-        c = @Counter.value
-        if !waiting_or_running_writer?(c) && @Counter.compare_and_set(c, c+1)
-          @HeldCount.value = held + 1
-          return true
-        end
-      end
-      false
-    end
-
-    # Release a previously acquired read lock.
-    #
-    # @return [Boolean] true if the lock is successfully released
-    def release_read_lock
-      held = @HeldCount.value = @HeldCount.value - 1
-      rlocks_held = held & READ_LOCK_MASK
-      if rlocks_held == 0
-        c = @Counter.update { |counter| counter - 1 }
-        # If one or more writers were waiting, and we were the last reader, wake a writer up
-        if waiting_or_running_writer?(c) && running_readers(c) == 0
-          @WriteQueue.signal
-        end
-      elsif rlocks_held == READ_LOCK_MASK
-        raise IllegalOperationError, "Cannot release a read lock which is not held"
-      end
-      true
-    end
-
-    # Acquire a write lock. Will block and wait for all active readers and writers.
-    #
-    # @return [Boolean] true if the lock is successfully acquired
-    #
-    # @raise [Concurrent::ResourceLimitError] if the maximum number of writers
-    #   is exceeded.
-    def acquire_write_lock
-      if (held = @HeldCount.value) >= WRITE_LOCK_HELD
-        # if we already have a write (exclusive) lock, there's no need to wait
-        @HeldCount.value = held + WRITE_LOCK_HELD
-        return true
-      end
-
-      while true
-        c = @Counter.value
-        raise ResourceLimitError.new('Too many writer threads') if max_writers?(c)
-
-        # To go ahead and take the lock without waiting, there must be no writer
-        #   running right now, AND no writers who came before us still waiting to
-        #   acquire the lock
-        # Additionally, if any read locks have been taken, we must hold all of them
-        if c == held
-          # If we successfully swap the RUNNING_WRITER bit on, then we can go ahead
-          if @Counter.compare_and_set(c, c+RUNNING_WRITER)
-            @HeldCount.value = held + WRITE_LOCK_HELD
-            return true
-          end
-        elsif @Counter.compare_and_set(c, c+WAITING_WRITER)
-          while true
-            # Now we have successfully incremented, so no more readers will be able to increment
-            #   (they will wait instead)
-            # However, readers OR writers could decrement right here
-            @WriteQueue.synchronize do
-              # So we have to do another check inside the synchronized section
-              # If a writer OR another reader is running, then go to sleep
-              c = @Counter.value
-              @WriteQueue.ns_wait if running_writer?(c) || running_readers(c) != held
-            end
-            # Note: if you are thinking of replacing the above 'synchronize' block
-            # with #wait_until, read the comment in #acquire_read_lock first!
-
-            # We just came out of a wait
-            # If we successfully turn the RUNNING_WRITER bit on with an atomic swap,
-            #   then we are OK to stop waiting and go ahead
-            # Otherwise go back and wait again
-            c = @Counter.value
-            if !running_writer?(c) &&
-               running_readers(c) == held &&
-               @Counter.compare_and_set(c, c+RUNNING_WRITER-WAITING_WRITER)
-              @HeldCount.value = held + WRITE_LOCK_HELD
-              return true
-            end
-          end
-        end
-      end
-    end
-
-    # Try to acquire a write lock and return true if we succeed. If it cannot be
-    # acquired immediately, return false.
-    #
-    # @return [Boolean] true if the lock is successfully acquired
-    def try_write_lock
-      if (held = @HeldCount.value) >= WRITE_LOCK_HELD
-        @HeldCount.value = held + WRITE_LOCK_HELD
-        return true
-      else
-        c = @Counter.value
-        if !waiting_or_running_writer?(c) &&
-           running_readers(c) == held &&
-           @Counter.compare_and_set(c, c+RUNNING_WRITER)
-           @HeldCount.value = held + WRITE_LOCK_HELD
-          return true
-        end
-      end
-      false
-    end
-
-    # Release a previously acquired write lock.
-    #
-    # @return [Boolean] true if the lock is successfully released
-    def release_write_lock
-      held = @HeldCount.value = @HeldCount.value - WRITE_LOCK_HELD
-      wlocks_held = held & WRITE_LOCK_MASK
-      if wlocks_held == 0
-        c = @Counter.update { |counter| counter - RUNNING_WRITER }
-        @ReadQueue.broadcast
-        @WriteQueue.signal if waiting_writers(c) > 0
-      elsif wlocks_held == WRITE_LOCK_MASK
-        raise IllegalOperationError, "Cannot release a write lock which is not held"
-      end
-      true
-    end
-
-    private
-
-    # @!visibility private
-    def running_readers(c = @Counter.value)
-      c & MAX_READERS
-    end
-
-    # @!visibility private
-    def running_readers?(c = @Counter.value)
-      (c & MAX_READERS) > 0
-    end
-
-    # @!visibility private
-    def running_writer?(c = @Counter.value)
-      c >= RUNNING_WRITER
-    end
-
-    # @!visibility private
-    def waiting_writers(c = @Counter.value)
-      (c & MAX_WRITERS) >> READER_BITS
-    end
-
-    # @!visibility private
-    def waiting_or_running_writer?(c = @Counter.value)
-      c >= WAITING_WRITER
-    end
-
-    # @!visibility private
-    def max_readers?(c = @Counter.value)
-      (c & MAX_READERS) == MAX_READERS
-    end
-
-    # @!visibility private
-    def max_writers?(c = @Counter.value)
-      (c & MAX_WRITERS) == MAX_WRITERS
-    end
-  end
-end

data/vendor/bundle/ruby/2.7.0/gems/concurrent-ruby-1.1.9/lib/concurrent-ruby/concurrent/atomic/ruby_thread_local_var.rb

@@ -1,181 +0,0 @@
-require 'thread'
-require 'concurrent/atomic/abstract_thread_local_var'
-
-module Concurrent
-
-  # @!visibility private
-  # @!macro internal_implementation_note
-  class RubyThreadLocalVar < AbstractThreadLocalVar
-
-    # Each thread has a (lazily initialized) array of thread-local variable values
-    # Each time a new thread-local var is created, we allocate an "index" for it
-    # For example, if the allocated index is 1, that means slot #1 in EVERY
-    #   thread's thread-local array will be used for the value of that TLV
-    #
-    # The good thing about using a per-THREAD structure to hold values, rather
-    #   than a per-TLV structure, is that no synchronization is needed when
-    #    reading and writing those values (since the structure is only ever
-    #    accessed by a single thread)
-    #
-    # Of course, when a TLV is GC'd, 1) we need to recover its index for use
-    #   by other new TLVs (otherwise the thread-local arrays could get bigger
-    #   and bigger with time), and 2) we need to null out all the references
-    #   held in the now-unused slots (both to avoid blocking GC of those objects,
-    #   and also to prevent "stale" values from being passed on to a new TLV
-    #   when the index is reused)
-    # Because we need to null out freed slots, we need to keep references to
-    #   ALL the thread-local arrays -- ARRAYS is for that
-    # But when a Thread is GC'd, we need to drop the reference to its thread-local
-    #   array, so we don't leak memory
-
-    FREE                = []
-    LOCK                = Mutex.new
-    THREAD_LOCAL_ARRAYS = {} # used as a hash set
-
-    # synchronize when not on MRI
-    # on MRI using lock in finalizer leads to "can't be called from trap context" error
-    # so the code is carefully written to be tread-safe on MRI relying on GIL
-
-    if Concurrent.on_cruby?
-      # @!visibility private
-      def self.semi_sync(&block)
-        block.call
-      end
-    else
-      # @!visibility private
-      def self.semi_sync(&block)
-        LOCK.synchronize(&block)
-      end
-    end
-
-    private_constant :FREE, :LOCK, :THREAD_LOCAL_ARRAYS
-
-    # @!macro thread_local_var_method_get
-    def value
-      if (array = get_threadlocal_array)
-        value = array[@index]
-        if value.nil?
-          default
-        elsif value.equal?(NULL)
-          nil
-        else
-          value
-        end
-      else
-        default
-      end
-    end
-
-    # @!macro thread_local_var_method_set
-    def value=(value)
-      me = Thread.current
-      # We could keep the thread-local arrays in a hash, keyed by Thread
-      # But why? That would require locking
-      # Using Ruby's built-in thread-local storage is faster
-      unless (array = get_threadlocal_array(me))
-        array = set_threadlocal_array([], me)
-        self.class.semi_sync { THREAD_LOCAL_ARRAYS[array.object_id] = array }
-        ObjectSpace.define_finalizer(me, self.class.thread_finalizer(array.object_id))
-      end
-      array[@index] = (value.nil? ? NULL : value)
-      value
-    end
-
-    protected
-
-    # @!visibility private
-    def allocate_storage
-      @index = FREE.pop || next_index
-
-      ObjectSpace.define_finalizer(self, self.class.thread_local_finalizer(@index))
-    end
-
-    # @!visibility private
-    def self.thread_local_finalizer(index)
-      proc do
-        semi_sync do
-          # The cost of GC'ing a TLV is linear in the number of threads using TLVs
-          # But that is natural! More threads means more storage is used per TLV
-          # So naturally more CPU time is required to free more storage
-          #
-          # DO NOT use each_value which might conflict with new pair assignment
-          # into the hash in #value= method
-          THREAD_LOCAL_ARRAYS.values.each { |array| array[index] = nil }
-          # free index has to be published after the arrays are cleared
-          FREE.push(index)
-        end
-      end
-    end
-
-    # @!visibility private
-    def self.thread_finalizer(id)
-      proc do
-        semi_sync do
-          # The thread which used this thread-local array is now gone
-          # So don't hold onto a reference to the array (thus blocking GC)
-          THREAD_LOCAL_ARRAYS.delete(id)
-        end
-      end
-    end
-
-    private
-
-    # noinspection RubyClassVariableUsageInspection
-    @@next = 0
-    # noinspection RubyClassVariableUsageInspection
-    def next_index
-      LOCK.synchronize do
-        result = @@next
-        @@next += 1
-        result
-      end
-    end
-
-    if Thread.instance_methods.include?(:thread_variable_get)
-
-      def get_threadlocal_array(thread = Thread.current)
-        thread.thread_variable_get(:__threadlocal_array__)
-      end
-
-      def set_threadlocal_array(array, thread = Thread.current)
-        thread.thread_variable_set(:__threadlocal_array__, array)
-      end
-
-    else
-
-      def get_threadlocal_array(thread = Thread.current)
-        thread[:__threadlocal_array__]
-      end
-
-      def set_threadlocal_array(array, thread = Thread.current)
-        thread[:__threadlocal_array__] = array
-      end
-    end
-
-    # This exists only for use in testing
-    # @!visibility private
-    def value_for(thread)
-      if (array = get_threadlocal_array(thread))
-        value = array[@index]
-        if value.nil?
-          get_default
-        elsif value.equal?(NULL)
-          nil
-        else
-          value
-        end
-      else
-        get_default
-      end
-    end
-
-    # @!visibility private
-    def get_default
-      if @default_block
-        raise "Cannot use default_for with default block"
-      else
-        @default
-      end
-    end
-  end
-end

data/vendor/bundle/ruby/2.7.0/gems/concurrent-ruby-1.1.9/lib/concurrent-ruby/concurrent/atomic/semaphore.rb

@@ -1,145 +0,0 @@
-require 'concurrent/atomic/mutex_semaphore'
-require 'concurrent/synchronization'
-
-module Concurrent
-
-  ###################################################################
-
-  # @!macro semaphore_method_initialize
-  #
-  #   Create a new `Semaphore` with the initial `count`.
-  #
-  #   @param [Fixnum] count the initial count
-  #
-  #   @raise [ArgumentError] if `count` is not an integer or is less than zero
-
-  # @!macro semaphore_method_acquire
-  #
-  #   Acquires the given number of permits from this semaphore,
-  #     blocking until all are available.
-  #
-  #   @param [Fixnum] permits Number of permits to acquire
-  #
-  #   @raise [ArgumentError] if `permits` is not an integer or is less than
-  #     one
-  #
-  #   @return [nil]
-
-  # @!macro semaphore_method_available_permits
-  #
-  #   Returns the current number of permits available in this semaphore.
-  #
-  #   @return [Integer]
-
-  # @!macro semaphore_method_drain_permits
-  #
-  #   Acquires and returns all permits that are immediately available.
-  #
-  #   @return [Integer]
-
-  # @!macro semaphore_method_try_acquire
-  #
-  #   Acquires the given number of permits from this semaphore,
-  #     only if all are available at the time of invocation or within
-  #     `timeout` interval
-  #
-  #   @param [Fixnum] permits the number of permits to acquire
-  #
-  #   @param [Fixnum] timeout the number of seconds to wait for the counter
-  #     or `nil` to return immediately
-  #
-  #   @raise [ArgumentError] if `permits` is not an integer or is less than
-  #     one
-  #
-  #   @return [Boolean] `false` if no permits are available, `true` when
-  #     acquired a permit
-
-  # @!macro semaphore_method_release
-  #
-  #   Releases the given number of permits, returning them to the semaphore.
-  #
-  #   @param [Fixnum] permits Number of permits to return to the semaphore.
-  #
-  #   @raise [ArgumentError] if `permits` is not a number or is less than one
-  #
-  #   @return [nil]
-
-  ###################################################################
-
-  # @!macro semaphore_public_api
-  #
-  #   @!method initialize(count)
-  #     @!macro semaphore_method_initialize
-  #
-  #   @!method acquire(permits = 1)
-  #     @!macro semaphore_method_acquire
-  #
-  #   @!method available_permits
-  #     @!macro semaphore_method_available_permits
-  #
-  #   @!method drain_permits
-  #     @!macro semaphore_method_drain_permits
-  #
-  #   @!method try_acquire(permits = 1, timeout = nil)
-  #     @!macro semaphore_method_try_acquire
-  #
-  #   @!method release(permits = 1)
-  #     @!macro semaphore_method_release
-
-  ###################################################################
-
-  # @!visibility private
-  # @!macro internal_implementation_note
-  SemaphoreImplementation = case
-                            when defined?(JavaSemaphore)
-                              JavaSemaphore
-                            else
-                              MutexSemaphore
-                            end
-  private_constant :SemaphoreImplementation
-
-  # @!macro semaphore
-  #
-  #   A counting semaphore. Conceptually, a semaphore maintains a set of
-  #   permits. Each {#acquire} blocks if necessary until a permit is
-  #   available, and then takes it. Each {#release} adds a permit, potentially
-  #   releasing a blocking acquirer.
-  #   However, no actual permit objects are used; the Semaphore just keeps a
-  #   count of the number available and acts accordingly.
-  #
-  # @!macro semaphore_public_api
-  # @example
-  #   semaphore = Concurrent::Semaphore.new(2)
-  #
-  #   t1 = Thread.new do
-  #     semaphore.acquire
-  #     puts "Thread 1 acquired semaphore"
-  #   end
-  #
-  #   t2 = Thread.new do
-  #     semaphore.acquire
-  #     puts "Thread 2 acquired semaphore"
-  #   end
-  #
-  #   t3 = Thread.new do
-  #     semaphore.acquire
-  #     puts "Thread 3 acquired semaphore"
-  #   end
-  #
-  #   t4 = Thread.new do
-  #     sleep(2)
-  #     puts "Thread 4 releasing semaphore"
-  #     semaphore.release
-  #   end
-  #
-  #   [t1, t2, t3, t4].each(&:join)
-  #
-  #   # prints:
-  #   # Thread 3 acquired semaphore
-  #   # Thread 2 acquired semaphore
-  #   # Thread 4 releasing semaphore
-  #   # Thread 1 acquired semaphore
-  #
-  class Semaphore < SemaphoreImplementation
-  end
-end