ric 0.14.2 → 0.14.6

data/vendor/bundle/ruby/2.7.0/gems/concurrent-ruby-1.1.9/lib/concurrent-ruby/concurrent/agent.rb

@@ -1,587 +0,0 @@
-require 'concurrent/configuration'
-require 'concurrent/atomic/atomic_reference'
-require 'concurrent/atomic/thread_local_var'
-require 'concurrent/collection/copy_on_write_observer_set'
-require 'concurrent/concern/observable'
-require 'concurrent/synchronization'
-
-module Concurrent
-
-  # `Agent` is inspired by Clojure's [agent](http://clojure.org/agents)
-  # function. An agent is a shared, mutable variable providing independent,
-  # uncoordinated, *asynchronous* change of individual values. Best used when
-  # the value will undergo frequent, complex updates. Suitable when the result
-  # of an update does not need to be known immediately. `Agent` is (mostly)
-  # functionally equivalent to Clojure's agent, except where the runtime
-  # prevents parity.
-  #
-  # Agents are reactive, not autonomous - there is no imperative message loop
-  # and no blocking receive. The state of an Agent should be itself immutable
-  # and the `#value` of an Agent is always immediately available for reading by
-  # any thread without any messages, i.e. observation does not require
-  # cooperation or coordination.
-  #
-  # Agent action dispatches are made using the various `#send` methods. These
-  # methods always return immediately. At some point later, in another thread,
-  # the following will happen:
-  #
-  # 1. The given `action` will be applied to the state of the Agent and the
-  #    `args`, if any were supplied.
-  # 2. The return value of `action` will be passed to the validator lambda,
-  #    if one has been set on the Agent.
-  # 3. If the validator succeeds or if no validator was given, the return value
-  #    of the given `action` will become the new `#value` of the Agent. See
-  #    `#initialize` for details.
-  # 4. If any observers were added to the Agent, they will be notified. See
-  #    `#add_observer` for details.
-  # 5. If during the `action` execution any other dispatches are made (directly
-  #    or indirectly), they will be held until after the `#value` of the Agent
-  #    has been changed.
-  #
-  # If any exceptions are thrown by an action function, no nested dispatches
-  # will occur, and the exception will be cached in the Agent itself. When an
-  # Agent has errors cached, any subsequent interactions will immediately throw
-  # an exception, until the agent's errors are cleared. Agent errors can be
-  # examined with `#error` and the agent restarted with `#restart`.
-  #
-  # The actions of all Agents get interleaved amongst threads in a thread pool.
-  # At any point in time, at most one action for each Agent is being executed.
-  # Actions dispatched to an agent from another single agent or thread will
-  # occur in the order they were sent, potentially interleaved with actions
-  # dispatched to the same agent from other sources. The `#send` method should
-  # be used for actions that are CPU limited, while the `#send_off` method is
-  # appropriate for actions that may block on IO.
-  #
-  # Unlike in Clojure, `Agent` cannot participate in `Concurrent::TVar` transactions.
-  #
-  # ## Example
-  #
-  # ```
-  # def next_fibonacci(set = nil)
-  #   return [0, 1] if set.nil?
-  #   set + [set[-2..-1].reduce{|sum,x| sum + x }]
-  # end
-  #
-  # # create an agent with an initial value
-  # agent = Concurrent::Agent.new(next_fibonacci)
-  #
-  # # send a few update requests
-  # 5.times do
-  #   agent.send{|set| next_fibonacci(set) }
-  # end
-  #
-  # # wait for them to complete
-  # agent.await
-  #
-  # # get the current value
-  # agent.value #=> [0, 1, 1, 2, 3, 5, 8]
-  # ```
-  #
-  # ## Observation
-  #
-  # Agents support observers through the {Concurrent::Observable} mixin module.
-  # Notification of observers occurs every time an action dispatch returns and
-  # the new value is successfully validated. Observation will *not* occur if the
-  # action raises an exception, if validation fails, or when a {#restart} occurs.
-  #
-  # When notified the observer will receive three arguments: `time`, `old_value`,
-  # and `new_value`. The `time` argument is the time at which the value change
-  # occurred. The `old_value` is the value of the Agent when the action began
-  # processing. The `new_value` is the value to which the Agent was set when the
-  # action completed. Note that `old_value` and `new_value` may be the same.
-  # This is not an error. It simply means that the action returned the same
-  # value.
-  #
-  # ## Nested Actions
-  #
-  # It is possible for an Agent action to post further actions back to itself.
-  # The nested actions will be enqueued normally then processed *after* the
-  # outer action completes, in the order they were sent, possibly interleaved
-  # with action dispatches from other threads. Nested actions never deadlock
-  # with one another and a failure in a nested action will never affect the
-  # outer action.
-  #
-  # Nested actions can be called using the Agent reference from the enclosing
-  # scope or by passing the reference in as a "send" argument. Nested actions
-  # cannot be post using `self` from within the action block/proc/lambda; `self`
-  # in this context will not reference the Agent. The preferred method for
-  # dispatching nested actions is to pass the Agent as an argument. This allows
-  # Ruby to more effectively manage the closing scope.
-  #
-  # Prefer this:
-  #
-  # ```
-  # agent = Concurrent::Agent.new(0)
-  # agent.send(agent) do |value, this|
-  #   this.send {|v| v + 42 }
-  #   3.14
-  # end
-  # agent.value #=> 45.14
-  # ```
-  #
-  # Over this:
-  #
-  # ```
-  # agent = Concurrent::Agent.new(0)
-  # agent.send do |value|
-  #   agent.send {|v| v + 42 }
-  #   3.14
-  # end
-  # ```
-  #
-  # @!macro agent_await_warning
-  #
-  #   **NOTE** Never, *under any circumstances*, call any of the "await" methods
-  #   ({#await}, {#await_for}, {#await_for!}, and {#wait}) from within an action
-  #   block/proc/lambda. The call will block the Agent and will always fail.
-  #   Calling either {#await} or {#wait} (with a timeout of `nil`) will
-  #   hopelessly deadlock the Agent with no possibility of recovery.
-  #
-  # @!macro thread_safe_variable_comparison
-  #
-  # @see http://clojure.org/Agents Clojure Agents
-  # @see http://clojure.org/state Values and Change - Clojure's approach to Identity and State
-  class Agent < Synchronization::LockableObject
-    include Concern::Observable
-
-    ERROR_MODES = [:continue, :fail].freeze
-    private_constant :ERROR_MODES
-
-    AWAIT_FLAG = ::Object.new
-    private_constant :AWAIT_FLAG
-
-    AWAIT_ACTION = ->(value, latch) { latch.count_down; AWAIT_FLAG }
-    private_constant :AWAIT_ACTION
-
-    DEFAULT_ERROR_HANDLER = ->(agent, error) { nil }
-    private_constant :DEFAULT_ERROR_HANDLER
-
-    DEFAULT_VALIDATOR = ->(value) { true }
-    private_constant :DEFAULT_VALIDATOR
-
-    Job = Struct.new(:action, :args, :executor, :caller)
-    private_constant :Job
-
-    # Raised during action processing or any other time in an Agent's lifecycle.
-    class Error < StandardError
-      def initialize(message = nil)
-        message ||= 'agent must be restarted before jobs can post'
-        super(message)
-      end
-    end
-
-    # Raised when a new value obtained during action processing or at `#restart`
-    # fails validation.
-    class ValidationError < Error
-      def initialize(message = nil)
-        message ||= 'invalid value'
-        super(message)
-      end
-    end
-
-    # The error mode this Agent is operating in. See {#initialize} for details.
-    attr_reader :error_mode
-
-    # Create a new `Agent` with the given initial value and options.
-    #
-    # The `:validator` option must be `nil` or a side-effect free proc/lambda
-    # which takes one argument. On any intended value change the validator, if
-    # provided, will be called. If the new value is invalid the validator should
-    # return `false` or raise an error.
-    #
-    # The `:error_handler` option must be `nil` or a proc/lambda which takes two
-    # arguments. When an action raises an error or validation fails, either by
-    # returning false or raising an error, the error handler will be called. The
-    # arguments to the error handler will be a reference to the agent itself and
-    # the error object which was raised.
-    #
-    # The `:error_mode` may be either `:continue` (the default if an error
-    # handler is given) or `:fail` (the default if error handler nil or not
-    # given).
-    #
-    # If an action being run by the agent throws an error or doesn't pass
-    # validation the error handler, if present, will be called. After the
-    # handler executes if the error mode is `:continue` the Agent will continue
-    # as if neither the action that caused the error nor the error itself ever
-    # happened.
-    #
-    # If the mode is `:fail` the Agent will become {#failed?} and will stop
-    # accepting new action dispatches. Any previously queued actions will be
-    # held until {#restart} is called. The {#value} method will still work,
-    # returning the value of the Agent before the error.
-    #
-    # @param [Object] initial the initial value
-    # @param [Hash] opts the configuration options
-    #
-    # @option opts [Symbol] :error_mode either `:continue` or `:fail`
-    # @option opts [nil, Proc] :error_handler the (optional) error handler
-    # @option opts [nil, Proc] :validator the (optional) validation procedure
-    def initialize(initial, opts = {})
-      super()
-      synchronize { ns_initialize(initial, opts) }
-    end
-
-    # The current value (state) of the Agent, irrespective of any pending or
-    # in-progress actions. The value is always available and is non-blocking.
-    #
-    # @return [Object] the current value
-    def value
-      @current.value # TODO (pitr 12-Sep-2015): broken unsafe read?
-    end
-
-    alias_method :deref, :value
-
-    # When {#failed?} and {#error_mode} is `:fail`, returns the error object
-    # which caused the failure, else `nil`. When {#error_mode} is `:continue`
-    # will *always* return `nil`.
-    #
-    # @return [nil, Error] the error which caused the failure when {#failed?}
-    def error
-      @error.value
-    end
-
-    alias_method :reason, :error
-
-    # @!macro agent_send
-    #
-    #   Dispatches an action to the Agent and returns immediately. Subsequently,
-    #   in a thread from a thread pool, the {#value} will be set to the return
-    #   value of the action. Action dispatches are only allowed when the Agent
-    #   is not {#failed?}.
-    #
-    #   The action must be a block/proc/lambda which takes 1 or more arguments.
-    #   The first argument is the current {#value} of the Agent. Any arguments
-    #   passed to the send method via the `args` parameter will be passed to the
-    #   action as the remaining arguments. The action must return the new value
-    #   of the Agent.
-    #
-    #   * {#send} and {#send!} should be used for actions that are CPU limited
-    #   * {#send_off}, {#send_off!}, and {#<<} are appropriate for actions that
-    #     may block on IO
-    #   * {#send_via} and {#send_via!} are used when a specific executor is to
-    #     be used for the action
-    #
-    #   @param [Array<Object>] args zero or more arguments to be passed to
-    #     the action
-    #   @param [Proc] action the action dispatch to be enqueued
-    #
-    #   @yield [agent, value, *args] process the old value and return the new
-    #   @yieldparam [Object] value the current {#value} of the Agent
-    #   @yieldparam [Array<Object>] args zero or more arguments to pass to the
-    #     action
-    #   @yieldreturn [Object] the new value of the Agent
-    #
-    # @!macro send_return
-    #   @return [Boolean] true if the action is successfully enqueued, false if
-    #     the Agent is {#failed?}
-    def send(*args, &action)
-      enqueue_action_job(action, args, Concurrent.global_fast_executor)
-    end
-
-    # @!macro agent_send
-    #
-    # @!macro send_bang_return_and_raise
-    #   @return [Boolean] true if the action is successfully enqueued
-    #   @raise [Concurrent::Agent::Error] if the Agent is {#failed?}
-    def send!(*args, &action)
-      raise Error.new unless send(*args, &action)
-      true
-    end
-
-    # @!macro agent_send
-    # @!macro send_return
-    def send_off(*args, &action)
-      enqueue_action_job(action, args, Concurrent.global_io_executor)
-    end
-
-    alias_method :post, :send_off
-
-    # @!macro agent_send
-    # @!macro send_bang_return_and_raise
-    def send_off!(*args, &action)
-      raise Error.new unless send_off(*args, &action)
-      true
-    end
-
-    # @!macro agent_send
-    # @!macro send_return
-    # @param [Concurrent::ExecutorService] executor the executor on which the
-    #   action is to be dispatched
-    def send_via(executor, *args, &action)
-      enqueue_action_job(action, args, executor)
-    end
-
-    # @!macro agent_send
-    # @!macro send_bang_return_and_raise
-    # @param [Concurrent::ExecutorService] executor the executor on which the
-    #   action is to be dispatched
-    def send_via!(executor, *args, &action)
-      raise Error.new unless send_via(executor, *args, &action)
-      true
-    end
-
-    # Dispatches an action to the Agent and returns immediately. Subsequently,
-    # in a thread from a thread pool, the {#value} will be set to the return
-    # value of the action. Appropriate for actions that may block on IO.
-    #
-    # @param [Proc] action the action dispatch to be enqueued
-    # @return [Concurrent::Agent] self
-    # @see #send_off
-    def <<(action)
-      send_off(&action)
-      self
-    end
-
-    # Blocks the current thread (indefinitely!) until all actions dispatched
-    # thus far, from this thread or nested by the Agent, have occurred. Will
-    # block when {#failed?}. Will never return if a failed Agent is {#restart}
-    # with `:clear_actions` true.
-    #
-    # Returns a reference to `self` to support method chaining:
-    #
-    # ```
-    # current_value = agent.await.value
-    # ```
-    #
-    # @return [Boolean] self
-    #
-    # @!macro agent_await_warning
-    def await
-      wait(nil)
-      self
-    end
-
-    # Blocks the current thread until all actions dispatched thus far, from this
-    # thread or nested by the Agent, have occurred, or the timeout (in seconds)
-    # has elapsed.
-    #
-    # @param [Float] timeout the maximum number of seconds to wait
-    # @return [Boolean] true if all actions complete before timeout else false
-    #
-    # @!macro agent_await_warning
-    def await_for(timeout)
-      wait(timeout.to_f)
-    end
-
-    # Blocks the current thread until all actions dispatched thus far, from this
-    # thread or nested by the Agent, have occurred, or the timeout (in seconds)
-    # has elapsed.
-    #
-    # @param [Float] timeout the maximum number of seconds to wait
-    # @return [Boolean] true if all actions complete before timeout
-    #
-    # @raise [Concurrent::TimeoutError] when timout is reached
-    #
-    # @!macro agent_await_warning
-    def await_for!(timeout)
-      raise Concurrent::TimeoutError unless wait(timeout.to_f)
-      true
-    end
-
-    # Blocks the current thread until all actions dispatched thus far, from this
-    # thread or nested by the Agent, have occurred, or the timeout (in seconds)
-    # has elapsed. Will block indefinitely when timeout is nil or not given.
-    #
-    # Provided mainly for consistency with other classes in this library. Prefer
-    # the various `await` methods instead.
-    #
-    # @param [Float] timeout the maximum number of seconds to wait
-    # @return [Boolean] true if all actions complete before timeout else false
-    #
-    # @!macro agent_await_warning
-    def wait(timeout = nil)
-      latch = Concurrent::CountDownLatch.new(1)
-      enqueue_await_job(latch)
-      latch.wait(timeout)
-    end
-
-    # Is the Agent in a failed state?
-    #
-    # @see #restart
-    def failed?
-      !@error.value.nil?
-    end
-
-    alias_method :stopped?, :failed?
-
-    # When an Agent is {#failed?}, changes the Agent {#value} to `new_value`
-    # then un-fails the Agent so that action dispatches are allowed again. If
-    # the `:clear_actions` option is give and true, any actions queued on the
-    # Agent that were being held while it was failed will be discarded,
-    # otherwise those held actions will proceed. The `new_value` must pass the
-    # validator if any, or `restart` will raise an exception and the Agent will
-    # remain failed with its old {#value} and {#error}. Observers, if any, will
-    # not be notified of the new state.
-    #
-    # @param [Object] new_value the new value for the Agent once restarted
-    # @param [Hash] opts the configuration options
-    # @option opts [Symbol] :clear_actions true if all enqueued but unprocessed
-    #   actions should be discarded on restart, else false (default: false)
-    # @return [Boolean] true
-    #
-    # @raise [Concurrent:AgentError] when not failed
-    def restart(new_value, opts = {})
-      clear_actions = opts.fetch(:clear_actions, false)
-      synchronize do
-        raise Error.new('agent is not failed') unless failed?
-        raise ValidationError unless ns_validate(new_value)
-        @current.value = new_value
-        @error.value   = nil
-        @queue.clear if clear_actions
-        ns_post_next_job unless @queue.empty?
-      end
-      true
-    end
-
-    class << self
-
-      # Blocks the current thread (indefinitely!) until all actions dispatched
-      # thus far to all the given Agents, from this thread or nested by the
-      # given Agents, have occurred. Will block when any of the agents are
-      # failed. Will never return if a failed Agent is restart with
-      # `:clear_actions` true.
-      #
-      # @param [Array<Concurrent::Agent>] agents the Agents on which to wait
-      # @return [Boolean] true
-      #
-      # @!macro agent_await_warning
-      def await(*agents)
-        agents.each { |agent| agent.await }
-        true
-      end
-
-      # Blocks the current thread until all actions dispatched thus far to all
-      # the given Agents, from this thread or nested by the given Agents, have
-      # occurred, or the timeout (in seconds) has elapsed.
-      #
-      # @param [Float] timeout the maximum number of seconds to wait
-      # @param [Array<Concurrent::Agent>] agents the Agents on which to wait
-      # @return [Boolean] true if all actions complete before timeout else false
-      #
-      # @!macro agent_await_warning
-      def await_for(timeout, *agents)
-        end_at = Concurrent.monotonic_time + timeout.to_f
-        ok     = agents.length.times do |i|
-          break false if (delay = end_at - Concurrent.monotonic_time) < 0
-          break false unless agents[i].await_for(delay)
-        end
-        !!ok
-      end
-
-      # Blocks the current thread until all actions dispatched thus far to all
-      # the given Agents, from this thread or nested by the given Agents, have
-      # occurred, or the timeout (in seconds) has elapsed.
-      #
-      # @param [Float] timeout the maximum number of seconds to wait
-      # @param [Array<Concurrent::Agent>] agents the Agents on which to wait
-      # @return [Boolean] true if all actions complete before timeout
-      #
-      # @raise [Concurrent::TimeoutError] when timout is reached
-      # @!macro agent_await_warning
-      def await_for!(timeout, *agents)
-        raise Concurrent::TimeoutError unless await_for(timeout, *agents)
-        true
-      end
-    end
-
-    private
-
-    def ns_initialize(initial, opts)
-      @error_mode    = opts[:error_mode]
-      @error_handler = opts[:error_handler]
-
-      if @error_mode && !ERROR_MODES.include?(@error_mode)
-        raise ArgumentError.new('unrecognized error mode')
-      elsif @error_mode.nil?
-        @error_mode = @error_handler ? :continue : :fail
-      end
-
-      @error_handler ||= DEFAULT_ERROR_HANDLER
-      @validator     = opts.fetch(:validator, DEFAULT_VALIDATOR)
-      @current       = Concurrent::AtomicReference.new(initial)
-      @error         = Concurrent::AtomicReference.new(nil)
-      @caller        = Concurrent::ThreadLocalVar.new(nil)
-      @queue         = []
-
-      self.observers = Collection::CopyOnNotifyObserverSet.new
-    end
-
-    def enqueue_action_job(action, args, executor)
-      raise ArgumentError.new('no action given') unless action
-      job = Job.new(action, args, executor, @caller.value || Thread.current.object_id)
-      synchronize { ns_enqueue_job(job) }
-    end
-
-    def enqueue_await_job(latch)
-      synchronize do
-        if (index = ns_find_last_job_for_thread)
-          job = Job.new(AWAIT_ACTION, [latch], Concurrent.global_immediate_executor,
-                        Thread.current.object_id)
-          ns_enqueue_job(job, index+1)
-        else
-          latch.count_down
-          true
-        end
-      end
-    end
-
-    def ns_enqueue_job(job, index = nil)
-      # a non-nil index means this is an await job
-      return false if index.nil? && failed?
-      index ||= @queue.length
-      @queue.insert(index, job)
-      # if this is the only job, post to executor
-      ns_post_next_job if @queue.length == 1
-      true
-    end
-
-    def ns_post_next_job
-      @queue.first.executor.post { execute_next_job }
-    end
-
-    def execute_next_job
-      job       = synchronize { @queue.first }
-      old_value = @current.value
-
-      @caller.value = job.caller # for nested actions
-      new_value     = job.action.call(old_value, *job.args)
-      @caller.value = nil
-
-      return if new_value == AWAIT_FLAG
-
-      if ns_validate(new_value)
-        @current.value = new_value
-        observers.notify_observers(Time.now, old_value, new_value)
-      else
-        handle_error(ValidationError.new)
-      end
-    rescue => error
-      handle_error(error)
-    ensure
-      synchronize do
-        @queue.shift
-        unless failed? || @queue.empty?
-          ns_post_next_job
-        end
-      end
-    end
-
-    def ns_validate(value)
-      @validator.call(value)
-    rescue
-      false
-    end
-
-    def handle_error(error)
-      # stop new jobs from posting
-      @error.value = error if @error_mode == :fail
-      @error_handler.call(self, error)
-    rescue
-      # do nothing
-    end
-
-    def ns_find_last_job_for_thread
-      @queue.rindex { |job| job.caller == Thread.current.object_id }
-    end
-  end
-end

data/vendor/bundle/ruby/2.7.0/gems/concurrent-ruby-1.1.9/lib/concurrent-ruby/concurrent/array.rb

@@ -1,66 +0,0 @@
-require 'concurrent/utility/engine'
-require 'concurrent/thread_safe/util'
-
-module Concurrent
-
-  # @!macro concurrent_array
-  #
-  #   A thread-safe subclass of Array. This version locks against the object
-  #   itself for every method call, ensuring only one thread can be reading
-  #   or writing at a time. This includes iteration methods like `#each`.
-  #
-  #   @note `a += b` is **not** a **thread-safe** operation on
-  #     `Concurrent::Array`. It reads array `a`, then it creates new `Concurrent::Array`
-  #     which is concatenation of `a` and `b`, then it writes the concatenation to `a`.
-  #     The read and write are independent operations they do not form a single atomic
-  #     operation therefore when two `+=` operations are executed concurrently updates
-  #     may be lost. Use `#concat` instead.
-  #
-  #   @see http://ruby-doc.org/core/Array.html Ruby standard library `Array`
-
-  # @!macro internal_implementation_note
-  ArrayImplementation = case
-                        when Concurrent.on_cruby?
-                          # Array is thread-safe in practice because CRuby runs
-                          # threads one at a time and does not do context
-                          # switching during the execution of C functions.
-                          ::Array
-
-                        when Concurrent.on_jruby?
-                          require 'jruby/synchronized'
-
-                          class JRubyArray < ::Array
-                            include JRuby::Synchronized
-                          end
-                          JRubyArray
-
-                        when Concurrent.on_rbx?
-                          require 'monitor'
-                          require 'concurrent/thread_safe/util/data_structures'
-
-                          class RbxArray < ::Array
-                          end
-
-                          ThreadSafe::Util.make_synchronized_on_rbx RbxArray
-                          RbxArray
-
-                        when Concurrent.on_truffleruby?
-                          require 'concurrent/thread_safe/util/data_structures'
-
-                          class TruffleRubyArray < ::Array
-                          end
-
-                          ThreadSafe::Util.make_synchronized_on_truffleruby TruffleRubyArray
-                          TruffleRubyArray
-
-                        else
-                          warn 'Possibly unsupported Ruby implementation'
-                          ::Array
-                        end
-  private_constant :ArrayImplementation
-
-  # @!macro concurrent_array
-  class Array < ArrayImplementation
-  end
-
-end