puppet 5.0.0 → 6.0.0

data/lib/puppet/type/mount.rb

@@ -1,310 +0,0 @@
-require 'puppet/property/boolean'
-
-module Puppet
-  # We want the mount to refresh when it changes.
-  Type.newtype(:mount, :self_refresh => true) do
-    @doc = "Manages mounted filesystems, including putting mount
-      information into the mount table. The actual behavior depends
-      on the value of the 'ensure' parameter.
-
-      **Refresh:** `mount` resources can respond to refresh events (via
-      `notify`, `subscribe`, or the `~>` arrow). If a `mount` receives an event
-      from another resource **and** its `ensure` attribute is set to `mounted`,
-      Puppet will try to unmount then remount that filesystem.
-
-      **Autorequires:** If Puppet is managing any parents of a mount resource ---
-      that is, other mount points higher up in the filesystem --- the child
-      mount will autorequire them.
-
-      **Autobefores:**  If Puppet is managing any child file paths of a mount
-      point, the mount resource will autobefore them."
-
-    feature :refreshable, "The provider can remount the filesystem.",
-      :methods => [:remount]
-
-    # Use the normal parent class, because we actually want to
-    # call code when sync is called.
-    newproperty(:ensure) do
-      desc "Control what to do with this mount. Set this attribute to
-        `unmounted` to make sure the filesystem is in the filesystem table
-        but not mounted (if the filesystem is currently mounted, it will be
-        unmounted).  Set it to `absent` to unmount (if necessary) and remove
-        the filesystem from the fstab.  Set to `mounted` to add it to the
-        fstab and mount it. Set to `present` to add to fstab but not change
-        mount/unmount status."
-
-      #  IS        -> SHOULD     In Sync  Action
-      #  ghost     -> present    NO       create
-      #  absent    -> present    NO       create
-      # (mounted   -> present    YES)
-      # (unmounted -> present    YES)
-      newvalue(:defined) do
-        provider.create
-        return :mount_created
-      end
-
-      aliasvalue :present, :defined
-
-      #  IS        -> SHOULD     In Sync  Action
-      #  ghost     -> unmounted  NO       create, unmount
-      #  absent    -> unmounted  NO       create
-      #  mounted   -> unmounted  NO       unmount
-      newvalue(:unmounted) do
-        case self.retrieve
-        when :ghost   # (not in fstab but mounted)
-          provider.create
-          @resource.flush
-          provider.unmount
-          return :mount_unmounted
-        when nil, :absent  # (not in fstab and not mounted)
-          provider.create
-          return :mount_created
-        when :mounted # (in fstab and mounted)
-          provider.unmount
-          syncothers # I guess it's more likely that the mount was originally mounted with
-                     # the wrong attributes so I sync AFTER the umount
-          return :mount_unmounted
-        else
-          raise Puppet::Error, _("Unexpected change from %{current} to unmounted}") % { current: current_value }
-        end
-      end
-
-      #  IS        -> SHOULD     In Sync  Action
-      #  ghost     -> absent     NO       unmount
-      #  mounted   -> absent     NO       provider.destroy AND unmount
-      #  unmounted -> absent     NO       provider.destroy
-      newvalue(:absent, :event => :mount_deleted) do
-        current_value = self.retrieve
-        provider.unmount if provider.mounted?
-        provider.destroy unless current_value == :ghost
-      end
-
-      #  IS        -> SHOULD     In Sync  Action
-      #  ghost     -> mounted    NO       provider.create
-      #  absent    -> mounted    NO       provider.create AND mount
-      #  unmounted -> mounted    NO       mount
-      newvalue(:mounted, :event => :mount_mounted) do
-        # Create the mount point if it does not already exist.
-        current_value = self.retrieve
-        currently_mounted = provider.mounted?
-        provider.create if [nil, :absent, :ghost].include?(current_value)
-
-        syncothers
-
-        # The fs can be already mounted if it was absent but mounted
-        provider.property_hash[:needs_mount] = true unless currently_mounted
-      end
-
-      # insync: mounted   -> present
-      #         unmounted -> present
-      def insync?(is)
-        if should == :defined and [:mounted,:unmounted].include?(is)
-          true
-        else
-          super
-        end
-      end
-
-      def syncothers
-        # We have to flush any changes to disk.
-        currentvalues = @resource.retrieve_resource
-
-        # Determine if there are any out-of-sync properties.
-        oos = @resource.send(:properties).find_all do |prop|
-          unless currentvalues.include?(prop)
-            raise Puppet::DevError, "Parent has property %s but it doesn't appear in the current values", [prop.name]
-          end
-          if prop.name == :ensure
-            false
-          else
-            ! prop.safe_insync?(currentvalues[prop])
-          end
-        end.each { |prop| prop.sync }.length
-        @resource.flush if oos > 0
-      end
-    end
-
-    newproperty(:device) do
-      desc "The device providing the mount.  This can be whatever
-        device is supporting by the mount, including network
-        devices or devices specified by UUID rather than device
-        path, depending on the operating system."
-
-      validate do |value|
-        raise Puppet::Error, _("device must not contain whitespace: %{value}") % { value: value } if value =~ /\s/
-      end
-    end
-
-    # Solaris specifies two devices, not just one.
-    newproperty(:blockdevice) do
-      desc "The device to fsck.  This is property is only valid
-        on Solaris, and in most cases will default to the correct
-        value."
-
-      # Default to the device but with "dsk" replaced with "rdsk".
-      defaultto do
-        if Facter.value(:osfamily) == "Solaris"
-          if device = resource[:device] and device =~ %r{/dsk/}
-            device.sub(%r{/dsk/}, "/rdsk/")
-          elsif fstype = resource[:fstype] and fstype == 'nfs'
-            '-'
-          else
-            nil
-          end
-        else
-          nil
-        end
-      end
-
-      validate do |value|
-        raise Puppet::Error, _("blockdevice must not contain whitespace: %{value}") % { value: value } if value =~ /\s/
-      end
-    end
-
-    newproperty(:fstype) do
-      desc "The mount type.  Valid values depend on the
-        operating system.  This is a required option."
-
-      validate do |value|
-        raise Puppet::Error, _("fstype must not contain whitespace: %{value}") % { value: value } if value =~ /\s/
-        raise Puppet::Error, _("fstype must not be an empty string") if value.empty?
-      end
-    end
-
-    newproperty(:options) do
-      desc "A single string containing options for the mount, as they would
-        appear in fstab. For many platforms this is a comma delimited string.
-        Consult the fstab(5) man page for system-specific details."
-
-      validate do |value|
-        raise Puppet::Error, _("options must not contain whitespace: %{value}") % { value: value } if value =~ /\s/
-        raise Puppet::Error, _("options must not be an empty string") if value.empty?
-      end
-    end
-
-    newproperty(:pass) do
-      desc "The pass in which the mount is checked."
-
-      defaultto {
-        if @resource.managed?
-          if Facter.value(:osfamily) == 'Solaris'
-            '-'
-          else
-            0
-          end
-        end
-      }
-    end
-
-    newproperty(:atboot, :parent => Puppet::Property::Boolean) do
-      desc "Whether to mount the mount at boot.  Not all platforms
-        support this."
-
-      def munge(value)
-        munged = super
-        if munged
-          :yes
-        else
-          :no
-        end
-      end
-    end
-
-    newproperty(:dump) do
-      desc "Whether to dump the mount.  Not all platform support this.
-        Valid values are `1` or `0` (or `2` on FreeBSD). Default is `0`."
-
-      if Facter.value(:operatingsystem) == "FreeBSD"
-        newvalue(%r{(0|1|2)})
-      else
-        newvalue(%r{(0|1)})
-      end
-
-      defaultto {
-        0 if @resource.managed?
-      }
-    end
-
-    newproperty(:target) do
-      desc "The file in which to store the mount table.  Only used by
-        those providers that write to disk."
-
-      defaultto { if @resource.class.defaultprovider.ancestors.include?(Puppet::Provider::ParsedFile)
-          @resource.class.defaultprovider.default_target
-        else
-          nil
-        end
-      }
-    end
-
-    newparam(:name) do
-      desc "The mount path for the mount."
-
-      isnamevar
-
-      validate do |value|
-        raise Puppet::Error, _("name must not contain whitespace: %{value}") % { value: value } if value =~ /\s/
-      end
-
-      munge do |value|
-        value.gsub(/^(.+?)\/*$/, '\1')
-      end
-    end
-
-    newparam(:remounts) do
-      desc "Whether the mount can be remounted  `mount -o remount`.  If
-        this is false, then the filesystem will be unmounted and remounted
-        manually, which is prone to failure."
-
-      newvalues(:true, :false)
-      defaultto do
-        case Facter.value(:operatingsystem)
-        when "FreeBSD", "Darwin", "DragonFly", "OpenBSD"
-          false
-        when "AIX"
-          if Facter.value(:kernelmajversion) == "5300"
-            false
-          elsif resource[:device] and resource[:device].match(%r{^[^/]+:/})
-            false
-          else
-            true
-          end
-        else
-          true
-        end
-      end
-    end
-
-    def refresh
-      # Only remount if we're supposed to be mounted.
-      provider.remount if self.should(:fstype) != "swap" and provider.mounted?
-    end
-
-    def value(name)
-      name = name.intern
-      if property = @parameters[name]
-        return property.value
-      end
-    end
-
-    # Ensure that mounts higher up in the filesystem are mounted first
-    autorequire(:mount) do
-      dependencies = []
-      Pathname.new(@parameters[:name].value).ascend do |parent|
-        dependencies.unshift parent.to_s
-      end
-      dependencies[0..-2]
-    end
-
-    # Autobefore the mount point's child file paths
-    autobefore(:file) do
-      dependencies = []
-      file_resources = catalog.resources.select { |resource| resource.type == :file }
-      children_file_resources = file_resources.select { |resource| File.expand_path(resource[:path]) =~ %r(^#{self[:name]}/.) }
-      children_file_resources.each do |child|
-        dependencies.push Pathname.new(child[:path])
-      end
-      dependencies
-    end
-  end
-end

data/lib/puppet/type/nagios_command.rb

@@ -1,3 +0,0 @@
-require 'puppet/util/nagios_maker'
-
-Puppet::Util::NagiosMaker.create_nagios_type :command

data/lib/puppet/type/nagios_contact.rb

@@ -1,3 +0,0 @@
-require 'puppet/util/nagios_maker'
-
-Puppet::Util::NagiosMaker.create_nagios_type :contact

data/lib/puppet/type/nagios_contactgroup.rb

@@ -1,3 +0,0 @@
-require 'puppet/util/nagios_maker'
-
-Puppet::Util::NagiosMaker.create_nagios_type :contactgroup

data/lib/puppet/type/nagios_host.rb

@@ -1,3 +0,0 @@
-require 'puppet/util/nagios_maker'
-
-Puppet::Util::NagiosMaker.create_nagios_type :host

data/lib/puppet/type/nagios_hostdependency.rb

@@ -1,3 +0,0 @@
-require 'puppet/util/nagios_maker'
-
-Puppet::Util::NagiosMaker.create_nagios_type :hostdependency

data/lib/puppet/type/nagios_hostescalation.rb

@@ -1,3 +0,0 @@
-require 'puppet/util/nagios_maker'
-
-Puppet::Util::NagiosMaker.create_nagios_type :hostescalation

data/lib/puppet/type/nagios_hostextinfo.rb

@@ -1,3 +0,0 @@
-require 'puppet/util/nagios_maker'
-
-Puppet::Util::NagiosMaker.create_nagios_type :hostextinfo

data/lib/puppet/type/nagios_hostgroup.rb

@@ -1,3 +0,0 @@
-require 'puppet/util/nagios_maker'
-
-Puppet::Util::NagiosMaker.create_nagios_type :hostgroup

data/lib/puppet/type/nagios_service.rb

@@ -1,3 +0,0 @@
-require 'puppet/util/nagios_maker'
-
-Puppet::Util::NagiosMaker.create_nagios_type :service

data/lib/puppet/type/nagios_servicedependency.rb

@@ -1,3 +0,0 @@
-require 'puppet/util/nagios_maker'
-
-Puppet::Util::NagiosMaker.create_nagios_type :servicedependency

data/lib/puppet/type/nagios_serviceescalation.rb

@@ -1,3 +0,0 @@
-require 'puppet/util/nagios_maker'
-
-Puppet::Util::NagiosMaker.create_nagios_type :serviceescalation

data/lib/puppet/type/nagios_serviceextinfo.rb

@@ -1,3 +0,0 @@
-require 'puppet/util/nagios_maker'
-
-Puppet::Util::NagiosMaker.create_nagios_type :serviceextinfo

data/lib/puppet/type/nagios_servicegroup.rb

@@ -1,3 +0,0 @@
-require 'puppet/util/nagios_maker'
-
-Puppet::Util::NagiosMaker.create_nagios_type :servicegroup

data/lib/puppet/type/nagios_timeperiod.rb

@@ -1,3 +0,0 @@
-require 'puppet/util/nagios_maker'
-
-Puppet::Util::NagiosMaker.create_nagios_type :timeperiod

data/lib/puppet/type/router.rb

@@ -1,17 +0,0 @@
-#
-# Manage a router abstraction
-
-
-module Puppet
-  Type.newtype(:router) do
-    @doc = "Manages connected router."
-
-    newparam(:url) do
-      desc <<-EOT
-        An SSH or telnet URL at which to access the router, in the form
-        `ssh://user:pass:enable@host/` or `telnet://user:pass:enable@host/`.
-      EOT
-      isnamevar
-    end
-  end
-end

data/lib/puppet/type/scheduled_task.rb

@@ -1,184 +0,0 @@
-require 'puppet/util'
-
-Puppet::Type.newtype(:scheduled_task) do
-  include Puppet::Util
-
-  @doc = "Installs and manages Windows Scheduled Tasks.  All attributes
-    except `name`, `command`, and `trigger` are optional; see the description
-    of the `trigger` attribute for details on setting schedules."
-
-  ensurable
-
-  newproperty(:enabled) do
-    desc "Whether the triggers for this task should be enabled. This attribute
-      affects every trigger for the task; triggers cannot be enabled or
-      disabled individually."
-
-    newvalue(:true,  :event => :task_enabled)
-    newvalue(:false, :event => :task_disabled)
-
-    defaultto(:true)
-  end
-
-  newparam(:name) do
-    desc "The name assigned to the scheduled task.  This will uniquely
-      identify the task on the system."
-
-    isnamevar
-  end
-
-  newproperty(:command) do
-    desc "The full path to the application to run, without any arguments."
-
-    validate do |value|
-      raise Puppet::Error.new(_('Must be specified using an absolute path.')) unless absolute_path?(value)
-    end
-    munge do |value|
-      # windows converts slashes to backslashes, so the *is* value
-      # has backslashes. Do the same for the *should* value, so that
-      # we are slash-insensitive. See #13009
-      File.expand_path(value).gsub(/\//, '\\')
-    end
-  end
-
-  newproperty(:working_dir) do
-    desc "The full path of the directory in which to start the command."
-
-    validate do |value|
-      raise Puppet::Error.new(_('Must be specified using an absolute path.')) unless absolute_path?(value)
-    end
-  end
-
-  newproperty(:arguments) do
-    desc "Any arguments or flags that should be passed to the command. Multiple arguments
-      should be specified as a space-separated string."
-  end
-
-  newproperty(:user) do
-    desc "The user to run the scheduled task as.  Please note that not
-      all security configurations will allow running a scheduled task
-      as 'SYSTEM', and saving the scheduled task under these
-      conditions will fail with a reported error of 'The operation
-      completed successfully'.  It is recommended that you either
-      choose another user to run the scheduled task, or alter the
-      security policy to allow v1 scheduled tasks to run as the
-      'SYSTEM' account.  Defaults to 'SYSTEM'.
-
-      Please also note that Puppet must be running as a privileged user
-      in order to manage `scheduled_task` resources. Running as an
-      unprivileged user will result in 'access denied' errors."
-
-    defaultto :system
-
-    def insync?(current)
-      provider.user_insync?(current, @should)
-    end
-  end
-
-  newparam(:password) do
-    desc "The password for the user specified in the 'user' attribute.
-      This is only used if specifying a user other than 'SYSTEM'.
-      Since there is no way to retrieve the password used to set the
-      account information for a task, this parameter will not be used
-      to determine if a scheduled task is in sync or not."
-  end
-
-  newproperty(:trigger, :array_matching => :all) do
-    desc <<-'EOT'
-      One or more triggers defining when the task should run. A single trigger is
-      represented as a hash, and multiple triggers can be specified with an array of
-      hashes.
-
-      A trigger can contain the following keys:
-
-      * For all triggers:
-          * `schedule` **(Required)** --- What kind of trigger this is.
-            Valid values are `daily`, `weekly`, `monthly`, or `once`. Each kind
-            of trigger is configured with a different set of keys; see the
-            sections below. (`once` triggers only need a start time/date.)
-          * `start_time` **(Required)** --- The time of day when the trigger should
-            first become active. Several time formats will work, but we
-            suggest 24-hour time formatted as HH:MM.
-          * `start_date` ---  The date when the trigger should first become active.
-            Defaults to the current date. You should format dates as YYYY-MM-DD,
-            although other date formats may work. (Under the hood, this uses `Date.parse`.)
-          * `minutes_interval` --- The repeat interval in minutes.
-          * `minutes_duration` --- The duration in minutes, needs to be greater than the
-            minutes_interval.
-      * For `daily` triggers:
-          * `every` --- How often the task should run, as a number of days. Defaults
-            to 1. ("2" means every other day, "3" means every three days, etc.)
-      * For `weekly` triggers:
-          * `every` --- How often the task should run, as a number of weeks. Defaults
-            to 1. ("2" means every other week, "3" means every three weeks, etc.)
-          * `day_of_week` --- Which days of the week the task should run, as an array.
-            Defaults to all days. Each day must be one of `mon`, `tues`,
-            `wed`, `thurs`, `fri`, `sat`, `sun`, or `all`.
-      * For `monthly` (by date) triggers:
-          * `months` --- Which months the task should run, as an array. Defaults to
-            all months. Each month must be an integer between 1 and 12.
-          * `on` **(Required)** --- Which days of the month the task should run,
-            as an array. Each day must be either an integer between 1 and 31,
-            or the special value `last,` which is always the last day of the month.
-      * For `monthly` (by weekday) triggers:
-          * `months` --- Which months the task should run, as an array. Defaults to
-            all months. Each month must be an integer between 1 and 12.
-          * `day_of_week` **(Required)** --- Which day of the week the task should
-            run, as an array with only one element. Each day must be one of `mon`,
-            `tues`, `wed`, `thurs`, `fri`, `sat`, `sun`, or `all`.
-          * `which_occurrence` **(Required)** --- The occurrence of the chosen weekday
-            when the task should run. Must be one of `first`, `second`, `third`,
-            `fourth`, `fifth`, or `last`.
-
-
-      Examples:
-
-          # Run at 8am on the 1st, 15th, and last day of the month in January, March,
-          # May, July, September, and November, starting after August 31st, 2011.
-          trigger => {
-            schedule   => monthly,
-            start_date => '2011-08-31',   # Defaults to current date
-            start_time => '08:00',        # Must be specified
-            months     => [1,3,5,7,9,11], # Defaults to all
-            on         => [1, 15, last],  # Must be specified
-          }
-
-          # Run at 8am on the first Monday of the month for January, March, and May,
-          # starting after August 31st, 2011.
-          trigger => {
-            schedule         => monthly,
-            start_date       => '2011-08-31', # Defaults to current date
-            start_time       => '08:00',      # Must be specified
-            months           => [1,3,5],      # Defaults to all
-            which_occurrence => first,        # Must be specified
-            day_of_week      => [mon],        # Must be specified
-          }
-
-          # Run daily repeating every 30 minutes between 9am and 5pm (480 minutes) starting after August 31st, 2011.
-          trigger => {
-            schedule         => daily,
-            start_date       => '2011-08-31', # Defaults to current date
-            start_time       => '8:00',       # Must be specified
-            minutes_interval => 30,
-            minutes_duration => 480,
-          }
-
-    EOT
-
-    validate do |value|
-      provider.validate_trigger(value)
-    end
-
-    def insync?(current)
-      provider.trigger_insync?(current, @should)
-    end
-
-    def should_to_s(new_value=@should)
-      super(new_value)
-    end
-
-    def is_to_s(current_value=@is)
-      super(current_value)
-    end
-  end
-end

data/lib/puppet/type/selboolean.rb

@@ -1,26 +0,0 @@
-module Puppet
-  Type.newtype(:selboolean) do
-    @doc = "Manages SELinux booleans on systems with SELinux support.  The supported booleans
-      are any of the ones found in `/selinux/booleans/`."
-
-    newparam(:name) do
-      desc "The name of the SELinux boolean to be managed."
-      isnamevar
-    end
-
-    newproperty(:value) do
-      desc "Whether the SELinux boolean should be enabled or disabled."
-      newvalue(:on)
-      newvalue(:off)
-    end
-
-    newparam(:persistent) do
-      desc "If set true, SELinux booleans will be written to disk and persist across reboots.
-        The default is `false`."
-
-      defaultto :false
-      newvalues(:true, :false)
-    end
-
-  end
-end

data/lib/puppet/type/selmodule.rb

@@ -1,59 +0,0 @@
-#
-# Simple module for managing SELinux policy modules
-#
-
-Puppet::Type.newtype(:selmodule) do
-  @doc = "Manages loading and unloading of SELinux policy modules
-    on the system.  Requires SELinux support.  See man semodule(8)
-    for more information on SELinux policy modules.
-
-    **Autorequires:** If Puppet is managing the file containing this SELinux
-    policy module (which is either explicitly specified in the `selmodulepath`
-    attribute or will be found at {`selmoduledir`}/{`name`}.pp), the selmodule
-    resource will autorequire that file."
-
-  ensurable
-
-  newparam(:name) do
-    desc "The name of the SELinux policy to be managed.  You should not
-      include the customary trailing .pp extension."
-    isnamevar
-  end
-
-  newparam(:selmoduledir) do
-
-    desc "The directory to look for the compiled pp module file in.
-      Currently defaults to `/usr/share/selinux/targeted`.  If the
-      `selmodulepath` attribute is not specified, Puppet will expect to find
-      the module in `<selmoduledir>/<name>.pp`, where `name` is the value of the
-      `name` parameter."
-
-    defaultto "/usr/share/selinux/targeted"
-  end
-
-  newparam(:selmodulepath) do
-
-    desc "The full path to the compiled .pp policy module.  You only need to use
-      this if the module file is not in the `selmoduledir` directory."
-
-  end
-
-  newproperty(:syncversion) do
-
-    desc "If set to `true`, the policy will be reloaded if the
-    version found in the on-disk file differs from the loaded
-    version.  If set to `false` (the default) the only check
-    that will be made is if the policy is loaded at all or not."
-
-    newvalue(:true)
-    newvalue(:false)
-  end
-
-  autorequire(:file) do
-    if self[:selmodulepath]
-      [self[:selmodulepath]]
-    else
-      ["#{self[:selmoduledir]}/#{self[:name]}.pp"]
-    end
-  end
-end