pract6 0.1.0

data/.gem/ruby/2.3.0/gems/tzinfo-1.2.3/lib/tzinfo/zoneinfo_country_info.rb

@@ -0,0 +1,35 @@
+module TZInfo  
+  # Represents information about a country returned by ZoneinfoDataSource.
+  #
+  # @private
+  class ZoneinfoCountryInfo < CountryInfo #:nodoc:
+    # Constructs a new CountryInfo with an ISO 3166 country code, name and 
+    # an array of CountryTimezones.
+    def initialize(code, name, zones)
+      super(code, name)
+      @zones = zones.dup.freeze
+      @zone_identifiers = nil
+    end
+    
+    # Returns a frozen array of all the zone identifiers for the country ordered
+    # geographically, most populous first.
+    def zone_identifiers
+      # Thread-safety: It is possible that the value of @zone_identifiers may be 
+      # calculated multiple times in concurrently executing threads. It is not 
+      # worth the overhead of locking to ensure that @zone_identifiers is only 
+      # calculated once.
+    
+      unless @zone_identifiers
+        @zone_identifiers = zones.collect {|zone| zone.identifier}.freeze
+      end
+      
+      @zone_identifiers
+    end
+    
+    # Returns a frozen array of all the timezones for the for the country 
+    # ordered geographically, most populous first.
+    def zones
+      @zones
+    end
+  end
+end

data/.gem/ruby/2.3.0/gems/tzinfo-1.2.3/lib/tzinfo/zoneinfo_data_source.rb

@@ -0,0 +1,487 @@
+module TZInfo
+  # An InvalidZoneinfoDirectory exception is raised if the DataSource is
+  # set to a specific zoneinfo path, which is not a valid zoneinfo directory
+  # (i.e. a directory containing index files named iso3166.tab and zone.tab
+  # as well as other timezone files).
+  class InvalidZoneinfoDirectory < StandardError
+  end
+  
+  # A ZoneinfoDirectoryNotFound exception is raised if no valid zoneinfo 
+  # directory could be found when checking the paths listed in
+  # ZoneinfoDataSource.search_path. A valid zoneinfo directory is one that
+  # contains timezone files, a country code index file named iso3166.tab and a
+  # timezone index file named zone1970.tab or zone.tab.
+  class ZoneinfoDirectoryNotFound < StandardError
+  end
+  
+  # A DataSource that loads data from a 'zoneinfo' directory containing
+  # compiled "TZif" version 3 (or earlier) files in addition to iso3166.tab and
+  # zone1970.tab or zone.tab index files.
+  #
+  # To have TZInfo load the system zoneinfo files, call TZInfo::DataSource.set 
+  # as follows:
+  #
+  #   TZInfo::DataSource.set(:zoneinfo)
+  #
+  # To load zoneinfo files from a particular directory, pass the directory to 
+  # TZInfo::DataSource.set:
+  #
+  #   TZInfo::DataSource.set(:zoneinfo, directory)
+  #
+  # Note that the platform used at runtime may limit the range of available
+  # transition data that can be loaded from zoneinfo files. There are two
+  # factors to consider:
+  #
+  # First of all, the zoneinfo support in TZInfo makes use of Ruby's Time class. 
+  # On 32-bit builds of Ruby 1.8, the Time class only supports 32-bit 
+  # timestamps. This means that only Times between 1901-12-13 20:45:52 and
+  # 2038-01-19 03:14:07 can be represented. Furthermore, certain platforms only
+  # allow for positive 32-bit timestamps (notably Windows), making the earliest
+  # representable time 1970-01-01 00:00:00.
+  #
+  # 64-bit builds of Ruby 1.8 and all builds of Ruby 1.9 support 64-bit 
+  # timestamps. This means that there is no practical restriction on the range
+  # of the Time class on these platforms.
+  #
+  # TZInfo will only load transitions that fall within the supported range of
+  # the Time class. Any queries performed on times outside of this range may
+  # give inaccurate results.
+  #
+  # The second factor concerns the zoneinfo files. Versions of the 'zic' tool
+  # (used to build zoneinfo files) that were released prior to February 2006
+  # created zoneinfo files that used 32-bit integers for transition timestamps.
+  # Later versions of zic produce zoneinfo files that use 64-bit integers. If
+  # you have 32-bit zoneinfo files on your system, then any queries falling
+  # outside of the range 1901-12-13 20:45:52 to 2038-01-19 03:14:07 may be
+  # inaccurate.
+  #
+  # Most modern platforms include 64-bit zoneinfo files. However, Mac OS X (up
+  # to at least 10.8.4) still uses 32-bit zoneinfo files.
+  #
+  # To check whether your zoneinfo files contain 32-bit or 64-bit transition
+  # data, you can run the following code (substituting the identifier of the 
+  # zone you want to test for zone_identifier):
+  #
+  #   TZInfo::DataSource.set(:zoneinfo)
+  #   dir = TZInfo::DataSource.get.zoneinfo_dir
+  #   File.open(File.join(dir, zone_identifier), 'r') {|f| f.read(5) }
+  #
+  # If the last line returns "TZif\\x00", then you have a 32-bit zoneinfo file.
+  # If it returns "TZif2" or "TZif3" then you have a 64-bit zoneinfo file.
+  #
+  # If you require support for 64-bit transitions, but are restricted to 32-bit
+  # zoneinfo support, then you may want to consider using TZInfo::RubyDataSource 
+  # instead.
+  class ZoneinfoDataSource < DataSource
+    # The default value of ZoneinfoDataSource.search_path.
+    DEFAULT_SEARCH_PATH = ['/usr/share/zoneinfo', '/usr/share/lib/zoneinfo', '/etc/zoneinfo'].freeze
+    
+    # The default value of ZoneinfoDataSource.alternate_iso3166_tab_search_path.
+    DEFAULT_ALTERNATE_ISO3166_TAB_SEARCH_PATH = ['/usr/share/misc/iso3166.tab', '/usr/share/misc/iso3166'].freeze
+    
+    # Paths to be checked to find the system zoneinfo directory.
+    @@search_path = DEFAULT_SEARCH_PATH.dup
+    
+    # Paths to possible alternate iso3166.tab files (used to locate the 
+    # system-wide iso3166.tab files on FreeBSD and OpenBSD).
+    @@alternate_iso3166_tab_search_path = DEFAULT_ALTERNATE_ISO3166_TAB_SEARCH_PATH.dup
+    
+    # An Array of directories that will be checked to find the system zoneinfo
+    # directory.
+    #
+    # Directories are checked in the order they appear in the Array.
+    #
+    # The default value is ['/usr/share/zoneinfo', '/usr/share/lib/zoneinfo', '/etc/zoneinfo'].
+    def self.search_path
+      @@search_path
+    end
+    
+    # Sets the directories to be checked when locating the system zoneinfo 
+    # directory.
+    #
+    # Can be set to an Array of directories or a String containing directories
+    # separated with File::PATH_SEPARATOR.
+    #
+    # Directories are checked in the order they appear in the Array or String.
+    #
+    # Set to nil to revert to the default paths.
+    def self.search_path=(search_path)
+      @@search_path = process_search_path(search_path, DEFAULT_SEARCH_PATH)      
+    end
+    
+    # An Array of paths that will be checked to find an alternate iso3166.tab 
+    # file if one was not included in the zoneinfo directory (for example, on 
+    # FreeBSD and OpenBSD systems).
+    #
+    # Paths are checked in the order they appear in the array.
+    #
+    # The default value is ['/usr/share/misc/iso3166.tab', '/usr/share/misc/iso3166'].
+    def self.alternate_iso3166_tab_search_path
+      @@alternate_iso3166_tab_search_path
+    end
+    
+    # Sets the paths to check to locate an alternate iso3166.tab file if one was
+    # not included in the zoneinfo directory.
+    #
+    # Can be set to an Array of directories or a String containing directories
+    # separated with File::PATH_SEPARATOR.
+    #
+    # Paths are checked in the order they appear in the array.
+    #
+    # Set to nil to revert to the default paths.
+    def self.alternate_iso3166_tab_search_path=(alternate_iso3166_tab_search_path)
+      @@alternate_iso3166_tab_search_path = process_search_path(alternate_iso3166_tab_search_path, DEFAULT_ALTERNATE_ISO3166_TAB_SEARCH_PATH)
+    end
+    
+    # The zoneinfo directory being used.
+    attr_reader :zoneinfo_dir
+    
+    # Creates a new ZoneinfoDataSource.
+    #
+    # If zoneinfo_dir is specified, it will be checked and used as the source
+    # of zoneinfo files. 
+    #
+    # The directory must contain a file named iso3166.tab and a file named
+    # either zone1970.tab or zone.tab. These may either be included in the root
+    # of the directory or in a 'tab' sub-directory and named 'country.tab' and
+    # 'zone_sun.tab' respectively (as is the case on Solaris.
+    #
+    # Additionally, the path to iso3166.tab can be overridden using the 
+    # alternate_iso3166_tab_path parameter.
+    #
+    # InvalidZoneinfoDirectory will be raised if the iso3166.tab and
+    # zone1970.tab or zone.tab files cannot be found using the zoneinfo_dir and
+    # alternate_iso3166_tab_path parameters.
+    # 
+    # If zoneinfo_dir is not specified or nil, the paths referenced in
+    # search_path are searched in order to find a valid zoneinfo directory 
+    # (one that contains zone1970.tab or zone.tab and iso3166.tab files as
+    # above).
+    #
+    # The paths referenced in alternate_iso3166_tab_search_path are also
+    # searched to find an iso3166.tab file if one of the searched zoneinfo
+    # directories doesn't contain an iso3166.tab file.
+    # 
+    # If no valid directory can be found by searching, ZoneinfoDirectoryNotFound
+    # will be raised.
+    def initialize(zoneinfo_dir = nil, alternate_iso3166_tab_path = nil)
+      if zoneinfo_dir
+        iso3166_tab_path, zone_tab_path = validate_zoneinfo_dir(zoneinfo_dir, alternate_iso3166_tab_path)
+      
+        unless iso3166_tab_path && zone_tab_path
+          raise InvalidZoneinfoDirectory, "#{zoneinfo_dir} is not a directory or doesn't contain a iso3166.tab file and a zone1970.tab or zone.tab file." 
+        end
+        
+        @zoneinfo_dir = zoneinfo_dir
+      else
+        @zoneinfo_dir, iso3166_tab_path, zone_tab_path = find_zoneinfo_dir
+        
+        unless @zoneinfo_dir && iso3166_tab_path && zone_tab_path
+          raise ZoneinfoDirectoryNotFound, "None of the paths included in TZInfo::ZoneinfoDataSource.search_path are valid zoneinfo directories."
+        end
+      end
+      
+      @zoneinfo_dir = File.expand_path(@zoneinfo_dir).freeze
+      @timezone_index = load_timezone_index.freeze
+      @country_index = load_country_index(iso3166_tab_path, zone_tab_path).freeze
+    end
+    
+    # Returns a TimezoneInfo instance for a given identifier. 
+    # Raises InvalidTimezoneIdentifier if the timezone is not found or the 
+    # identifier is invalid.
+    def load_timezone_info(identifier)
+      begin
+        if @timezone_index.include?(identifier)
+          path = File.join(@zoneinfo_dir, identifier)
+          
+          # Untaint path rather than identifier. We don't want to modify 
+          # identifier. identifier may also be frozen and therefore cannot be
+          # untainted.
+          path.untaint
+          
+          begin
+            ZoneinfoTimezoneInfo.new(identifier, path)
+          rescue InvalidZoneinfoFile => e
+            raise InvalidTimezoneIdentifier, e.message
+          end
+        else
+          raise InvalidTimezoneIdentifier, 'Invalid identifier'
+        end
+      rescue Errno::ENOENT, Errno::ENAMETOOLONG, Errno::ENOTDIR
+        raise InvalidTimezoneIdentifier, 'Invalid identifier'
+      rescue Errno::EACCES => e
+        raise InvalidTimezoneIdentifier, e.message
+      end
+    end    
+    
+    # Returns an array of all the available timezone identifiers.
+    def timezone_identifiers
+      @timezone_index
+    end
+    
+    # Returns an array of all the available timezone identifiers for
+    # data timezones (i.e. those that actually contain definitions).
+    #
+    # For ZoneinfoDataSource, this will always be identical to 
+    # timezone_identifers.
+    def data_timezone_identifiers
+      @timezone_index
+    end
+    
+    # Returns an array of all the available timezone identifiers that
+    # are links to other timezones.
+    #
+    # For ZoneinfoDataSource, this will always be an empty array.
+    def linked_timezone_identifiers
+      [].freeze
+    end
+    
+    # Returns a CountryInfo instance for the given ISO 3166-1 alpha-2
+    # country code. Raises InvalidCountryCode if the country could not be found
+    # or the code is invalid.
+    def load_country_info(code)
+      info = @country_index[code]
+      raise InvalidCountryCode, 'Invalid country code' unless info
+      info
+    end
+    
+    # Returns an array of all the available ISO 3166-1 alpha-2
+    # country codes.
+    def country_codes
+      @country_index.keys.freeze
+    end
+    
+    # Returns the name and information about this DataSource.
+    def to_s
+      "Zoneinfo DataSource: #{@zoneinfo_dir}"
+    end
+    
+    # Returns internal object state as a programmer-readable string.
+    def inspect
+      "#<#{self.class}: #{@zoneinfo_dir}>"
+    end    
+    
+    private
+    
+    # Processes a path for use as the search_path or
+    # alternate_iso3166_tab_search_path.
+    def self.process_search_path(path, default)
+      if path
+        if path.kind_of?(String)
+          path.split(File::PATH_SEPARATOR)
+        else
+          path.collect {|p| p.to_s}
+        end
+      else
+        default.dup
+      end
+    end
+    
+    # Validates a zoneinfo directory and returns the paths to the iso3166.tab 
+    # and zone1970.tab or zone.tab files if valid. If the directory is not
+    # valid, returns nil.
+    #
+    # The path to the iso3166.tab file may be overriden by passing in a path.
+    # This is treated as either absolute or relative to the current working
+    # directory.    
+    def validate_zoneinfo_dir(path, iso3166_tab_path = nil)
+      if File.directory?(path)
+        if iso3166_tab_path
+          return nil unless File.file?(iso3166_tab_path)
+        else
+          iso3166_tab_path = resolve_tab_path(path, ['iso3166.tab'], 'country.tab')
+          return nil unless iso3166_tab_path          
+        end
+        
+        zone_tab_path = resolve_tab_path(path, ['zone1970.tab', 'zone.tab'], 'zone_sun.tab')
+        return nil unless zone_tab_path
+      
+        [iso3166_tab_path, zone_tab_path]
+      else
+        nil
+      end
+    end
+    
+    # Attempts to resolve the path to a tab file given its standard names and
+    # tab sub-directory name (as used on Solaris).
+    def resolve_tab_path(zoneinfo_path, standard_names, tab_name)
+      standard_names.each do |standard_name|
+        path = File.join(zoneinfo_path, standard_name)
+        return path if File.file?(path)
+      end
+      
+      path = File.join(zoneinfo_path, 'tab', tab_name)
+      return path if File.file?(path)
+      
+      nil
+    end
+    
+    # Finds a zoneinfo directory using search_path and 
+    # alternate_iso3166_tab_search_path. Returns the paths to the directory,
+    # the iso3166.tab file and the zone.tab file or nil if not found.
+    def find_zoneinfo_dir
+      alternate_iso3166_tab_path = self.class.alternate_iso3166_tab_search_path.detect do |path|
+        File.file?(path)
+      end
+      
+      self.class.search_path.each do |path|
+        # Try without the alternate_iso3166_tab_path first.
+        iso3166_tab_path, zone_tab_path = validate_zoneinfo_dir(path)        
+        return path, iso3166_tab_path, zone_tab_path if iso3166_tab_path && zone_tab_path
+        
+        if alternate_iso3166_tab_path
+          iso3166_tab_path, zone_tab_path = validate_zoneinfo_dir(path, alternate_iso3166_tab_path)        
+          return path, iso3166_tab_path, zone_tab_path if iso3166_tab_path && zone_tab_path
+        end
+      end
+      
+      # Not found.
+      nil
+    end
+       
+    # Scans @zoneinfo_dir and returns an Array of available timezone 
+    # identifiers.
+    def load_timezone_index
+      index = []
+      
+      # Ignoring particular files:
+      # +VERSION is included on Mac OS X.
+      # localtime current local timezone (may be a link).
+      # posix, posixrules and right are directories containing other versions of the zoneinfo files.
+      # src is a directory containing the tzdata source included on Solaris.
+      # timeconfig is a symlink included on Slackware.
+      
+      enum_timezones(nil, ['+VERSION', 'localtime', 'posix', 'posixrules', 'right', 'src', 'timeconfig']) do |identifier|
+        index << identifier
+      end
+      
+      index.sort
+    end
+    
+    # Recursively scans a directory of timezones, calling the passed in block
+    # for each identifier found.
+    def enum_timezones(dir, exclude = [], &block)
+      Dir.foreach(dir ? File.join(@zoneinfo_dir, dir) : @zoneinfo_dir) do |entry|
+        unless entry =~ /\./ || exclude.include?(entry)
+          entry.untaint
+          path = dir ? File.join(dir, entry) : entry
+          full_path = File.join(@zoneinfo_dir, path)
+ 
+          if File.directory?(full_path)
+            enum_timezones(path, [], &block)
+          elsif File.file?(full_path)
+            yield path
+          end
+        end
+      end
+    end
+    
+    # Uses the iso3166.tab and zone1970.tab or zone.tab files to build an index
+    # of the available countries and their timezones.
+    def load_country_index(iso3166_tab_path, zone_tab_path)
+      
+      # Handle standard 3 to 4 column zone.tab files as well as the 4 to 5 
+      # column format used by Solaris.
+      #
+      # On Solaris, an extra column before the comment gives an optional 
+      # linked/alternate timezone identifier (or '-' if not set).
+      #
+      # Additionally, there is a section at the end of the file for timezones
+      # covering regions. These are given lower-case "country" codes. The timezone
+      # identifier column refers to a continent instead of an identifier. These
+      # lines will be ignored by TZInfo.
+      #
+      # Since the last column is optional in both formats, testing for the 
+      # Solaris format is done in two passes. The first pass identifies if there
+      # are any lines using 5 columns.
+
+
+      # The first column is allowed to be a comma separated list of country
+      # codes, as used in zone1970.tab (introduced in tzdata 2014f).
+      #
+      # The first country code in the comma-separated list is the country that
+      # contains the city the zone identifer is based on. The first country
+      # code on each line is considered to be primary with the others
+      # secondary.
+      #
+      # The zones for each country are ordered primary first, then secondary.
+      # Within the primary and secondary groups, the zones are ordered by their
+      # order in the file.
+      
+      file_is_5_column = false
+      zone_tab = []
+      
+      RubyCoreSupport.open_file(zone_tab_path, 'r', :external_encoding => 'UTF-8', :internal_encoding => 'UTF-8') do |file|
+        file.each_line do |line|
+          line.chomp!
+          
+          if line =~ /\A([A-Z]{2}(?:,[A-Z]{2})*)\t(?:([+\-])(\d{2})(\d{2})([+\-])(\d{3})(\d{2})|([+\-])(\d{2})(\d{2})(\d{2})([+\-])(\d{3})(\d{2})(\d{2}))\t([^\t]+)(?:\t([^\t]+))?(?:\t([^\t]+))?\z/
+            codes = $1
+            
+            if $2
+              latitude = dms_to_rational($2, $3, $4)
+              longitude = dms_to_rational($5, $6, $7)
+            else
+              latitude = dms_to_rational($8, $9, $10, $11)
+              longitude = dms_to_rational($12, $13, $14, $15)
+            end
+            
+            zone_identifier = $16
+            column4 = $17
+            column5 = $18
+            
+            file_is_5_column = true if column5
+            
+            zone_tab << [codes.split(','.freeze), zone_identifier, latitude, longitude, column4, column5]
+          end
+        end
+      end
+      
+      primary_zones = {}
+      secondary_zones = {}
+      
+      zone_tab.each do |codes, zone_identifier, latitude, longitude, column4, column5|
+        description = file_is_5_column ? column5 : column4
+        country_timezone = CountryTimezone.new(zone_identifier, latitude, longitude, description)
+
+        # codes will always have at least one element
+
+        (primary_zones[codes.first] ||= []) << country_timezone
+
+        codes[1..-1].each do |code|
+          (secondary_zones[code] ||= []) << country_timezone
+        end
+      end
+      
+      countries = {}
+      
+      RubyCoreSupport.open_file(iso3166_tab_path, 'r', :external_encoding => 'UTF-8', :internal_encoding => 'UTF-8') do |file|
+        file.each_line do |line|
+          line.chomp!
+          
+          # Handle both the two column alpha-2 and name format used in the tz 
+          # database as well as the 4 column alpha-2, alpha-3, numeric-3 and 
+          # name format used by FreeBSD and OpenBSD.
+          
+          if line =~ /\A([A-Z]{2})(?:\t[A-Z]{3}\t[0-9]{3})?\t(.+)\z/
+            code = $1
+            name = $2
+            zones = (primary_zones[code] || []) + (secondary_zones[code] || [])
+
+            countries[code] = ZoneinfoCountryInfo.new(code, name, zones)
+          end
+        end
+      end
+      
+      countries
+    end
+    
+    # Converts degrees, minutes and seconds to a Rational.
+    def dms_to_rational(sign, degrees, minutes, seconds = nil)
+      result = degrees.to_i + Rational(minutes.to_i, 60)
+      result += Rational(seconds.to_i, 3600) if seconds
+      result = -result if sign == '-'.freeze
+      result
+    end
+  end
+end