pg_query 2.2.0 → 6.1.0

data/ext/pg_query/include/port/atomics/arch-arm.h

@@ -1,26 +0,0 @@
-/*-------------------------------------------------------------------------
- *
- * arch-arm.h
- *	  Atomic operations considerations specific to ARM
- *
- * Portions Copyright (c) 2013-2020, PostgreSQL Global Development Group
- *
- * NOTES:
- *
- * src/include/port/atomics/arch-arm.h
- *
- *-------------------------------------------------------------------------
- */
-
-/* intentionally no include guards, should only be included by atomics.h */
-#ifndef INSIDE_ATOMICS_H
-#error "should be included via atomics.h"
-#endif
-
-/*
- * 64 bit atomics on ARM32 are implemented using kernel fallbacks and thus
- * might be slow, so disable entirely. On ARM64 that problem doesn't exist.
- */
-#if !defined(__aarch64__) && !defined(__aarch64)
-#define PG_DISABLE_64_BIT_ATOMICS
-#endif  /* __aarch64__ || __aarch64 */

data/ext/pg_query/include/port/atomics/arch-ppc.h

@@ -1,254 +0,0 @@
-/*-------------------------------------------------------------------------
- *
- * arch-ppc.h
- *	  Atomic operations considerations specific to PowerPC
- *
- * Portions Copyright (c) 1996-2020, PostgreSQL Global Development Group
- * Portions Copyright (c) 1994, Regents of the University of California
- *
- * NOTES:
- *
- * src/include/port/atomics/arch-ppc.h
- *
- *-------------------------------------------------------------------------
- */
-
-#if defined(__GNUC__)
-
-/*
- * lwsync orders loads with respect to each other, and similarly with stores.
- * But a load can be performed before a subsequent store, so sync must be used
- * for a full memory barrier.
- */
-#define pg_memory_barrier_impl()	__asm__ __volatile__ ("sync" : : : "memory")
-#define pg_read_barrier_impl()		__asm__ __volatile__ ("lwsync" : : : "memory")
-#define pg_write_barrier_impl()		__asm__ __volatile__ ("lwsync" : : : "memory")
-#endif
-
-#define PG_HAVE_ATOMIC_U32_SUPPORT
-typedef struct pg_atomic_uint32
-{
-	volatile uint32 value;
-} pg_atomic_uint32;
-
-/* 64bit atomics are only supported in 64bit mode */
-#if SIZEOF_VOID_P >= 8
-#define PG_HAVE_ATOMIC_U64_SUPPORT
-typedef struct pg_atomic_uint64
-{
-	volatile uint64 value pg_attribute_aligned(8);
-} pg_atomic_uint64;
-
-#endif
-
-/*
- * This mimics gcc __atomic_compare_exchange_n(..., __ATOMIC_SEQ_CST), but
- * code generation differs at the end.  __atomic_compare_exchange_n():
- *  100:	isync
- *  104:	mfcr    r3
- *  108:	rlwinm  r3,r3,3,31,31
- *  10c:	bne     120 <.eb+0x10>
- *  110:	clrldi  r3,r3,63
- *  114:	addi    r1,r1,112
- *  118:	blr
- *  11c:	nop
- *  120:	clrldi  r3,r3,63
- *  124:	stw     r9,0(r4)
- *  128:	addi    r1,r1,112
- *  12c:	blr
- *
- * This:
- *   f0:	isync
- *   f4:	mfcr    r9
- *   f8:	rldicl. r3,r9,35,63
- *   fc:	bne     104 <.eb>
- *  100:	stw     r10,0(r4)
- *  104:	addi    r1,r1,112
- *  108:	blr
- *
- * This implementation may or may not have materially different performance.
- * It's not exploiting the fact that cr0 still holds the relevant comparison
- * bits, set during the __asm__.  One could fix that by moving more code into
- * the __asm__.  (That would remove the freedom to eliminate dead stores when
- * the caller ignores "expected", but few callers do.)
- *
- * Recognizing constant "newval" would be superfluous, because there's no
- * immediate-operand version of stwcx.
- */
-#define PG_HAVE_ATOMIC_COMPARE_EXCHANGE_U32
-static inline bool
-pg_atomic_compare_exchange_u32_impl(volatile pg_atomic_uint32 *ptr,
-									uint32 *expected, uint32 newval)
-{
-	uint32 found;
-	uint32 condition_register;
-	bool ret;
-
-#ifdef HAVE_I_CONSTRAINT__BUILTIN_CONSTANT_P
-	if (__builtin_constant_p(*expected) &&
-		(int32) *expected <= PG_INT16_MAX &&
-		(int32) *expected >= PG_INT16_MIN)
-		__asm__ __volatile__(
-			"	sync				\n"
-			"	lwarx   %0,0,%5		\n"
-			"	cmpwi   %0,%3		\n"
-			"	bne     $+12		\n"		/* branch to isync */
-			"	stwcx.  %4,0,%5		\n"
-			"	bne     $-16		\n"		/* branch to lwarx */
-			"	isync				\n"
-			"	mfcr    %1          \n"
-:			"=&r"(found), "=r"(condition_register), "+m"(ptr->value)
-:			"i"(*expected), "r"(newval), "r"(&ptr->value)
-:			"memory", "cc");
-	else
-#endif
-		__asm__ __volatile__(
-			"	sync				\n"
-			"	lwarx   %0,0,%5		\n"
-			"	cmpw    %0,%3		\n"
-			"	bne     $+12		\n"		/* branch to isync */
-			"	stwcx.  %4,0,%5		\n"
-			"	bne     $-16		\n"		/* branch to lwarx */
-			"	isync				\n"
-			"	mfcr    %1          \n"
-:			"=&r"(found), "=r"(condition_register), "+m"(ptr->value)
-:			"r"(*expected), "r"(newval), "r"(&ptr->value)
-:			"memory", "cc");
-
-	ret = (condition_register >> 29) & 1;	/* test eq bit of cr0 */
-	if (!ret)
-		*expected = found;
-	return ret;
-}
-
-/*
- * This mirrors gcc __sync_fetch_and_add().
- *
- * Like tas(), use constraint "=&b" to avoid allocating r0.
- */
-#define PG_HAVE_ATOMIC_FETCH_ADD_U32
-static inline uint32
-pg_atomic_fetch_add_u32_impl(volatile pg_atomic_uint32 *ptr, int32 add_)
-{
-	uint32 _t;
-	uint32 res;
-
-#ifdef HAVE_I_CONSTRAINT__BUILTIN_CONSTANT_P
-	if (__builtin_constant_p(add_) &&
-		add_ <= PG_INT16_MAX && add_ >= PG_INT16_MIN)
-		__asm__ __volatile__(
-			"	sync				\n"
-			"	lwarx   %1,0,%4		\n"
-			"	addi    %0,%1,%3	\n"
-			"	stwcx.  %0,0,%4		\n"
-			"	bne     $-12		\n"		/* branch to lwarx */
-			"	isync				\n"
-:			"=&r"(_t), "=&b"(res), "+m"(ptr->value)
-:			"i"(add_), "r"(&ptr->value)
-:			"memory", "cc");
-	else
-#endif
-		__asm__ __volatile__(
-			"	sync				\n"
-			"	lwarx   %1,0,%4		\n"
-			"	add     %0,%1,%3	\n"
-			"	stwcx.  %0,0,%4		\n"
-			"	bne     $-12		\n"		/* branch to lwarx */
-			"	isync				\n"
-:			"=&r"(_t), "=&r"(res), "+m"(ptr->value)
-:			"r"(add_), "r"(&ptr->value)
-:			"memory", "cc");
-
-	return res;
-}
-
-#ifdef PG_HAVE_ATOMIC_U64_SUPPORT
-
-#define PG_HAVE_ATOMIC_COMPARE_EXCHANGE_U64
-static inline bool
-pg_atomic_compare_exchange_u64_impl(volatile pg_atomic_uint64 *ptr,
-									uint64 *expected, uint64 newval)
-{
-	uint64 found;
-	uint32 condition_register;
-	bool ret;
-
-	/* Like u32, but s/lwarx/ldarx/; s/stwcx/stdcx/; s/cmpw/cmpd/ */
-#ifdef HAVE_I_CONSTRAINT__BUILTIN_CONSTANT_P
-	if (__builtin_constant_p(*expected) &&
-		(int64) *expected <= PG_INT16_MAX &&
-		(int64) *expected >= PG_INT16_MIN)
-		__asm__ __volatile__(
-			"	sync				\n"
-			"	ldarx   %0,0,%5		\n"
-			"	cmpdi   %0,%3		\n"
-			"	bne     $+12		\n"		/* branch to isync */
-			"	stdcx.  %4,0,%5		\n"
-			"	bne     $-16		\n"		/* branch to ldarx */
-			"	isync				\n"
-			"	mfcr    %1          \n"
-:			"=&r"(found), "=r"(condition_register), "+m"(ptr->value)
-:			"i"(*expected), "r"(newval), "r"(&ptr->value)
-:			"memory", "cc");
-	else
-#endif
-		__asm__ __volatile__(
-			"	sync				\n"
-			"	ldarx   %0,0,%5		\n"
-			"	cmpd    %0,%3		\n"
-			"	bne     $+12		\n"		/* branch to isync */
-			"	stdcx.  %4,0,%5		\n"
-			"	bne     $-16		\n"		/* branch to ldarx */
-			"	isync				\n"
-			"	mfcr    %1          \n"
-:			"=&r"(found), "=r"(condition_register), "+m"(ptr->value)
-:			"r"(*expected), "r"(newval), "r"(&ptr->value)
-:			"memory", "cc");
-
-	ret = (condition_register >> 29) & 1;	/* test eq bit of cr0 */
-	if (!ret)
-		*expected = found;
-	return ret;
-}
-
-#define PG_HAVE_ATOMIC_FETCH_ADD_U64
-static inline uint64
-pg_atomic_fetch_add_u64_impl(volatile pg_atomic_uint64 *ptr, int64 add_)
-{
-	uint64 _t;
-	uint64 res;
-
-	/* Like u32, but s/lwarx/ldarx/; s/stwcx/stdcx/ */
-#ifdef HAVE_I_CONSTRAINT__BUILTIN_CONSTANT_P
-	if (__builtin_constant_p(add_) &&
-		add_ <= PG_INT16_MAX && add_ >= PG_INT16_MIN)
-		__asm__ __volatile__(
-			"	sync				\n"
-			"	ldarx   %1,0,%4		\n"
-			"	addi    %0,%1,%3	\n"
-			"	stdcx.  %0,0,%4		\n"
-			"	bne     $-12		\n"		/* branch to ldarx */
-			"	isync				\n"
-:			"=&r"(_t), "=&b"(res), "+m"(ptr->value)
-:			"i"(add_), "r"(&ptr->value)
-:			"memory", "cc");
-	else
-#endif
-		__asm__ __volatile__(
-			"	sync				\n"
-			"	ldarx   %1,0,%4		\n"
-			"	add     %0,%1,%3	\n"
-			"	stdcx.  %0,0,%4		\n"
-			"	bne     $-12		\n"		/* branch to ldarx */
-			"	isync				\n"
-:			"=&r"(_t), "=&r"(res), "+m"(ptr->value)
-:			"r"(add_), "r"(&ptr->value)
-:			"memory", "cc");
-
-	return res;
-}
-
-#endif /* PG_HAVE_ATOMIC_U64_SUPPORT */
-
-/* per architecture manual doubleword accesses have single copy atomicity */
-#define PG_HAVE_8BYTE_SINGLE_COPY_ATOMICITY

data/ext/pg_query/include/port/atomics/arch-x86.h

@@ -1,252 +0,0 @@
-/*-------------------------------------------------------------------------
- *
- * arch-x86.h
- *	  Atomic operations considerations specific to intel x86
- *
- * Note that we actually require a 486 upwards because the 386 doesn't have
- * support for xadd and cmpxchg. Given that the 386 isn't supported anywhere
- * anymore that's not much of a restriction luckily.
- *
- * Portions Copyright (c) 1996-2020, PostgreSQL Global Development Group
- * Portions Copyright (c) 1994, Regents of the University of California
- *
- * NOTES:
- *
- * src/include/port/atomics/arch-x86.h
- *
- *-------------------------------------------------------------------------
- */
-
-/*
- * Both 32 and 64 bit x86 do not allow loads to be reordered with other loads,
- * or stores to be reordered with other stores, but a load can be performed
- * before a subsequent store.
- *
- * Technically, some x86-ish chips support uncached memory access and/or
- * special instructions that are weakly ordered.  In those cases we'd need
- * the read and write barriers to be lfence and sfence.  But since we don't
- * do those things, a compiler barrier should be enough.
- *
- * "lock; addl" has worked for longer than "mfence". It's also rumored to be
- * faster in many scenarios.
- */
-
-#if defined(__GNUC__) || defined(__INTEL_COMPILER)
-#if defined(__i386__) || defined(__i386)
-#define pg_memory_barrier_impl()		\
-	__asm__ __volatile__ ("lock; addl $0,0(%%esp)" : : : "memory", "cc")
-#elif defined(__x86_64__)
-#define pg_memory_barrier_impl()		\
-	__asm__ __volatile__ ("lock; addl $0,0(%%rsp)" : : : "memory", "cc")
-#endif
-#endif /* defined(__GNUC__) || defined(__INTEL_COMPILER) */
-
-#define pg_read_barrier_impl()		pg_compiler_barrier_impl()
-#define pg_write_barrier_impl()		pg_compiler_barrier_impl()
-
-/*
- * Provide implementation for atomics using inline assembly on x86 gcc. It's
- * nice to support older gcc's and the compare/exchange implementation here is
- * actually more efficient than the * __sync variant.
- */
-#if defined(HAVE_ATOMICS)
-
-#if defined(__GNUC__) || defined(__INTEL_COMPILER)
-
-#define PG_HAVE_ATOMIC_FLAG_SUPPORT
-typedef struct pg_atomic_flag
-{
-	volatile char value;
-} pg_atomic_flag;
-
-#define PG_HAVE_ATOMIC_U32_SUPPORT
-typedef struct pg_atomic_uint32
-{
-	volatile uint32 value;
-} pg_atomic_uint32;
-
-/*
- * It's too complicated to write inline asm for 64bit types on 32bit and the
- * 486 can't do it anyway.
- */
-#ifdef __x86_64__
-#define PG_HAVE_ATOMIC_U64_SUPPORT
-typedef struct pg_atomic_uint64
-{
-	/* alignment guaranteed due to being on a 64bit platform */
-	volatile uint64 value;
-} pg_atomic_uint64;
-#endif	/* __x86_64__ */
-
-#endif /* defined(__GNUC__) || defined(__INTEL_COMPILER) */
-
-#endif /* defined(HAVE_ATOMICS) */
-
-#if !defined(PG_HAVE_SPIN_DELAY)
-/*
- * This sequence is equivalent to the PAUSE instruction ("rep" is
- * ignored by old IA32 processors if the following instruction is
- * not a string operation); the IA-32 Architecture Software
- * Developer's Manual, Vol. 3, Section 7.7.2 describes why using
- * PAUSE in the inner loop of a spin lock is necessary for good
- * performance:
- *
- *     The PAUSE instruction improves the performance of IA-32
- *     processors supporting Hyper-Threading Technology when
- *     executing spin-wait loops and other routines where one
- *     thread is accessing a shared lock or semaphore in a tight
- *     polling loop. When executing a spin-wait loop, the
- *     processor can suffer a severe performance penalty when
- *     exiting the loop because it detects a possible memory order
- *     violation and flushes the core processor's pipeline. The
- *     PAUSE instruction provides a hint to the processor that the
- *     code sequence is a spin-wait loop. The processor uses this
- *     hint to avoid the memory order violation and prevent the
- *     pipeline flush. In addition, the PAUSE instruction
- *     de-pipelines the spin-wait loop to prevent it from
- *     consuming execution resources excessively.
- */
-#if defined(__GNUC__) || defined(__INTEL_COMPILER)
-#define PG_HAVE_SPIN_DELAY
-static __inline__ void
-pg_spin_delay_impl(void)
-{
-	__asm__ __volatile__(" rep; nop			\n");
-}
-#elif defined(_MSC_VER) && defined(__x86_64__)
-#define PG_HAVE_SPIN_DELAY
-static __forceinline void
-pg_spin_delay_impl(void)
-{
-	_mm_pause();
-}
-#elif defined(_MSC_VER)
-#define PG_HAVE_SPIN_DELAY
-static __forceinline void
-pg_spin_delay_impl(void)
-{
-	/* See comment for gcc code. Same code, MASM syntax */
-	__asm rep nop;
-}
-#endif
-#endif /* !defined(PG_HAVE_SPIN_DELAY) */
-
-
-#if defined(HAVE_ATOMICS)
-
-#if defined(__GNUC__) || defined(__INTEL_COMPILER)
-
-#define PG_HAVE_ATOMIC_TEST_SET_FLAG
-static inline bool
-pg_atomic_test_set_flag_impl(volatile pg_atomic_flag *ptr)
-{
-	register char _res = 1;
-
-	__asm__ __volatile__(
-		"	lock			\n"
-		"	xchgb	%0,%1	\n"
-:		"+q"(_res), "+m"(ptr->value)
-:
-:		"memory");
-	return _res == 0;
-}
-
-#define PG_HAVE_ATOMIC_CLEAR_FLAG
-static inline void
-pg_atomic_clear_flag_impl(volatile pg_atomic_flag *ptr)
-{
-	/*
-	 * On a TSO architecture like x86 it's sufficient to use a compiler
-	 * barrier to achieve release semantics.
-	 */
-	__asm__ __volatile__("" ::: "memory");
-	ptr->value = 0;
-}
-
-#define PG_HAVE_ATOMIC_COMPARE_EXCHANGE_U32
-static inline bool
-pg_atomic_compare_exchange_u32_impl(volatile pg_atomic_uint32 *ptr,
-									uint32 *expected, uint32 newval)
-{
-	char	ret;
-
-	/*
-	 * Perform cmpxchg and use the zero flag which it implicitly sets when
-	 * equal to measure the success.
-	 */
-	__asm__ __volatile__(
-		"	lock				\n"
-		"	cmpxchgl	%4,%5	\n"
-		"   setz		%2		\n"
-:		"=a" (*expected), "=m"(ptr->value), "=q" (ret)
-:		"a" (*expected), "r" (newval), "m"(ptr->value)
-:		"memory", "cc");
-	return (bool) ret;
-}
-
-#define PG_HAVE_ATOMIC_FETCH_ADD_U32
-static inline uint32
-pg_atomic_fetch_add_u32_impl(volatile pg_atomic_uint32 *ptr, int32 add_)
-{
-	uint32 res;
-	__asm__ __volatile__(
-		"	lock				\n"
-		"	xaddl	%0,%1		\n"
-:		"=q"(res), "=m"(ptr->value)
-:		"0" (add_), "m"(ptr->value)
-:		"memory", "cc");
-	return res;
-}
-
-#ifdef __x86_64__
-
-#define PG_HAVE_ATOMIC_COMPARE_EXCHANGE_U64
-static inline bool
-pg_atomic_compare_exchange_u64_impl(volatile pg_atomic_uint64 *ptr,
-									uint64 *expected, uint64 newval)
-{
-	char	ret;
-
-	/*
-	 * Perform cmpxchg and use the zero flag which it implicitly sets when
-	 * equal to measure the success.
-	 */
-	__asm__ __volatile__(
-		"	lock				\n"
-		"	cmpxchgq	%4,%5	\n"
-		"   setz		%2		\n"
-:		"=a" (*expected), "=m"(ptr->value), "=q" (ret)
-:		"a" (*expected), "r" (newval), "m"(ptr->value)
-:		"memory", "cc");
-	return (bool) ret;
-}
-
-#define PG_HAVE_ATOMIC_FETCH_ADD_U64
-static inline uint64
-pg_atomic_fetch_add_u64_impl(volatile pg_atomic_uint64 *ptr, int64 add_)
-{
-	uint64 res;
-	__asm__ __volatile__(
-		"	lock				\n"
-		"	xaddq	%0,%1		\n"
-:		"=q"(res), "=m"(ptr->value)
-:		"0" (add_), "m"(ptr->value)
-:		"memory", "cc");
-	return res;
-}
-
-#endif /* __x86_64__ */
-
-#endif /* defined(__GNUC__) || defined(__INTEL_COMPILER) */
-
-/*
- * 8 byte reads / writes have single-copy atomicity on 32 bit x86 platforms
- * since at least the 586. As well as on all x86-64 cpus.
- */
-#if defined(__i568__) || defined(__i668__) || /* gcc i586+ */  \
-	(defined(_M_IX86) && _M_IX86 >= 500) || /* msvc i586+ */ \
-	defined(__x86_64__) || defined(__x86_64) || defined(_M_X64) /* gcc, sunpro, msvc */
-#define PG_HAVE_8BYTE_SINGLE_COPY_ATOMICITY
-#endif /* 8 byte single-copy atomicity */
-
-#endif /* HAVE_ATOMICS */

data/ext/pg_query/include/port/atomics/fallback.h

@@ -1,170 +0,0 @@
-/*-------------------------------------------------------------------------
- *
- * fallback.h
- *    Fallback for platforms without spinlock and/or atomics support. Slower
- *    than native atomics support, but not unusably slow.
- *
- * Portions Copyright (c) 1996-2020, PostgreSQL Global Development Group
- * Portions Copyright (c) 1994, Regents of the University of California
- *
- * src/include/port/atomics/fallback.h
- *
- *-------------------------------------------------------------------------
- */
-
-/* intentionally no include guards, should only be included by atomics.h */
-#ifndef INSIDE_ATOMICS_H
-#	error "should be included via atomics.h"
-#endif
-
-#ifndef pg_memory_barrier_impl
-/*
- * If we have no memory barrier implementation for this architecture, we
- * fall back to acquiring and releasing a spinlock.  This might, in turn,
- * fall back to the semaphore-based spinlock implementation, which will be
- * amazingly slow.
- *
- * It's not self-evident that every possible legal implementation of a
- * spinlock acquire-and-release would be equivalent to a full memory barrier.
- * For example, I'm not sure that Itanium's acq and rel add up to a full
- * fence.  But all of our actual implementations seem OK in this regard.
- */
-#define PG_HAVE_MEMORY_BARRIER_EMULATION
-
-extern void pg_spinlock_barrier(void);
-#define pg_memory_barrier_impl pg_spinlock_barrier
-#endif
-
-#ifndef pg_compiler_barrier_impl
-/*
- * If the compiler/arch combination does not provide compiler barriers,
- * provide a fallback.  The fallback simply consists of a function call into
- * an externally defined function.  That should guarantee compiler barrier
- * semantics except for compilers that do inter translation unit/global
- * optimization - those better provide an actual compiler barrier.
- *
- * A native compiler barrier for sure is a lot faster than this...
- */
-#define PG_HAVE_COMPILER_BARRIER_EMULATION
-extern void pg_extern_compiler_barrier(void);
-#define pg_compiler_barrier_impl pg_extern_compiler_barrier
-#endif
-
-
-/*
- * If we have atomics implementation for this platform, fall back to providing
- * the atomics API using a spinlock to protect the internal state. Possibly
- * the spinlock implementation uses semaphores internally...
- *
- * We have to be a bit careful here, as it's not guaranteed that atomic
- * variables are mapped to the same address in every process (e.g. dynamic
- * shared memory segments). We can't just hash the address and use that to map
- * to a spinlock. Instead assign a spinlock on initialization of the atomic
- * variable.
- */
-#if !defined(PG_HAVE_ATOMIC_FLAG_SUPPORT) && !defined(PG_HAVE_ATOMIC_U32_SUPPORT)
-
-#define PG_HAVE_ATOMIC_FLAG_SIMULATION
-#define PG_HAVE_ATOMIC_FLAG_SUPPORT
-
-typedef struct pg_atomic_flag
-{
-	/*
-	 * To avoid circular includes we can't use s_lock as a type here. Instead
-	 * just reserve enough space for all spinlock types. Some platforms would
-	 * be content with just one byte instead of 4, but that's not too much
-	 * waste.
-	 */
-#if defined(__hppa) || defined(__hppa__)	/* HP PA-RISC, GCC and HP compilers */
-	int			sema[4];
-#else
-	int			sema;
-#endif
-	volatile bool value;
-} pg_atomic_flag;
-
-#endif /* PG_HAVE_ATOMIC_FLAG_SUPPORT */
-
-#if !defined(PG_HAVE_ATOMIC_U32_SUPPORT)
-
-#define PG_HAVE_ATOMIC_U32_SIMULATION
-
-#define PG_HAVE_ATOMIC_U32_SUPPORT
-typedef struct pg_atomic_uint32
-{
-	/* Check pg_atomic_flag's definition above for an explanation */
-#if defined(__hppa) || defined(__hppa__)	/* HP PA-RISC, GCC and HP compilers */
-	int			sema[4];
-#else
-	int			sema;
-#endif
-	volatile uint32 value;
-} pg_atomic_uint32;
-
-#endif /* PG_HAVE_ATOMIC_U32_SUPPORT */
-
-#if !defined(PG_HAVE_ATOMIC_U64_SUPPORT)
-
-#define PG_HAVE_ATOMIC_U64_SIMULATION
-
-#define PG_HAVE_ATOMIC_U64_SUPPORT
-typedef struct pg_atomic_uint64
-{
-	/* Check pg_atomic_flag's definition above for an explanation */
-#if defined(__hppa) || defined(__hppa__)	/* HP PA-RISC, GCC and HP compilers */
-	int			sema[4];
-#else
-	int			sema;
-#endif
-	volatile uint64 value;
-} pg_atomic_uint64;
-
-#endif /* PG_HAVE_ATOMIC_U64_SUPPORT */
-
-#ifdef PG_HAVE_ATOMIC_FLAG_SIMULATION
-
-#define PG_HAVE_ATOMIC_INIT_FLAG
-extern void pg_atomic_init_flag_impl(volatile pg_atomic_flag *ptr);
-
-#define PG_HAVE_ATOMIC_TEST_SET_FLAG
-extern bool pg_atomic_test_set_flag_impl(volatile pg_atomic_flag *ptr);
-
-#define PG_HAVE_ATOMIC_CLEAR_FLAG
-extern void pg_atomic_clear_flag_impl(volatile pg_atomic_flag *ptr);
-
-#define PG_HAVE_ATOMIC_UNLOCKED_TEST_FLAG
-extern bool pg_atomic_unlocked_test_flag_impl(volatile pg_atomic_flag *ptr);
-
-#endif /* PG_HAVE_ATOMIC_FLAG_SIMULATION */
-
-#ifdef PG_HAVE_ATOMIC_U32_SIMULATION
-
-#define PG_HAVE_ATOMIC_INIT_U32
-extern void pg_atomic_init_u32_impl(volatile pg_atomic_uint32 *ptr, uint32 val_);
-
-#define PG_HAVE_ATOMIC_WRITE_U32
-extern void pg_atomic_write_u32_impl(volatile pg_atomic_uint32 *ptr, uint32 val);
-
-#define PG_HAVE_ATOMIC_COMPARE_EXCHANGE_U32
-extern bool pg_atomic_compare_exchange_u32_impl(volatile pg_atomic_uint32 *ptr,
-												uint32 *expected, uint32 newval);
-
-#define PG_HAVE_ATOMIC_FETCH_ADD_U32
-extern uint32 pg_atomic_fetch_add_u32_impl(volatile pg_atomic_uint32 *ptr, int32 add_);
-
-#endif /* PG_HAVE_ATOMIC_U32_SIMULATION */
-
-
-#ifdef PG_HAVE_ATOMIC_U64_SIMULATION
-
-#define PG_HAVE_ATOMIC_INIT_U64
-extern void pg_atomic_init_u64_impl(volatile pg_atomic_uint64 *ptr, uint64 val_);
-
-#define PG_HAVE_ATOMIC_COMPARE_EXCHANGE_U64
-extern bool pg_atomic_compare_exchange_u64_impl(volatile pg_atomic_uint64 *ptr,
-												uint64 *expected, uint64 newval);
-
-#define PG_HAVE_ATOMIC_FETCH_ADD_U64
-extern uint64 pg_atomic_fetch_add_u64_impl(volatile pg_atomic_uint64 *ptr, int64 add_);
-
-#endif /* PG_HAVE_ATOMIC_U64_SIMULATION */