pg_query 2.2.0 → 6.1.0

data/ext/pg_query/include/pg_config_manual.h

@@ -1,357 +0,0 @@
-/*------------------------------------------------------------------------
- * PostgreSQL manual configuration settings
- *
- * This file contains various configuration symbols and limits.  In
- * all cases, changing them is only useful in very rare situations or
- * for developers.  If you edit any of these, be sure to do a *full*
- * rebuild (and an initdb if noted).
- *
- * Portions Copyright (c) 1996-2020, PostgreSQL Global Development Group
- * Portions Copyright (c) 1994, Regents of the University of California
- *
- * src/include/pg_config_manual.h
- *------------------------------------------------------------------------
- */
-
-/*
- * This is the default value for wal_segment_size to be used when initdb is run
- * without the --wal-segsize option.  It must be a valid segment size.
- */
-#define DEFAULT_XLOG_SEG_SIZE	(16*1024*1024)
-
-/*
- * Maximum length for identifiers (e.g. table names, column names,
- * function names).  Names actually are limited to one less byte than this,
- * because the length must include a trailing zero byte.
- *
- * Changing this requires an initdb.
- */
-#define NAMEDATALEN 64
-
-/*
- * Maximum number of arguments to a function.
- *
- * The minimum value is 8 (GIN indexes use 8-argument support functions).
- * The maximum possible value is around 600 (limited by index tuple size in
- * pg_proc's index; BLCKSZ larger than 8K would allow more).  Values larger
- * than needed will waste memory and processing time, but do not directly
- * cost disk space.
- *
- * Changing this does not require an initdb, but it does require a full
- * backend recompile (including any user-defined C functions).
- */
-#define FUNC_MAX_ARGS		100
-
-/*
- * Maximum number of columns in an index.  There is little point in making
- * this anything but a multiple of 32, because the main cost is associated
- * with index tuple header size (see access/itup.h).
- *
- * Changing this requires an initdb.
- */
-#define INDEX_MAX_KEYS		32
-
-/*
- * Maximum number of columns in a partition key
- */
-#define PARTITION_MAX_KEYS	32
-
-/*
- * Decide whether built-in 8-byte types, including float8, int8, and
- * timestamp, are passed by value.  This is on by default if sizeof(Datum) >=
- * 8 (that is, on 64-bit platforms).  If sizeof(Datum) < 8 (32-bit platforms),
- * this must be off.  We keep this here as an option so that it is easy to
- * test the pass-by-reference code paths on 64-bit platforms.
- *
- * Changing this requires an initdb.
- */
-#if SIZEOF_VOID_P >= 8
-#define USE_FLOAT8_BYVAL 1
-#endif
-
-/*
- * When we don't have native spinlocks, we use semaphores to simulate them.
- * Decreasing this value reduces consumption of OS resources; increasing it
- * may improve performance, but supplying a real spinlock implementation is
- * probably far better.
- */
-#define NUM_SPINLOCK_SEMAPHORES		128
-
-/*
- * When we have neither spinlocks nor atomic operations support we're
- * implementing atomic operations on top of spinlock on top of semaphores. To
- * be safe against atomic operations while holding a spinlock separate
- * semaphores have to be used.
- */
-#define NUM_ATOMICS_SEMAPHORES		64
-
-/*
- * MAXPGPATH: standard size of a pathname buffer in PostgreSQL (hence,
- * maximum usable pathname length is one less).
- *
- * We'd use a standard system header symbol for this, if there weren't
- * so many to choose from: MAXPATHLEN, MAX_PATH, PATH_MAX are all
- * defined by different "standards", and often have different values
- * on the same platform!  So we just punt and use a reasonably
- * generous setting here.
- */
-#define MAXPGPATH		1024
-
-/*
- * PG_SOMAXCONN: maximum accept-queue length limit passed to
- * listen(2).  You'd think we should use SOMAXCONN from
- * <sys/socket.h>, but on many systems that symbol is much smaller
- * than the kernel's actual limit.  In any case, this symbol need be
- * twiddled only if you have a kernel that refuses large limit values,
- * rather than silently reducing the value to what it can handle
- * (which is what most if not all Unixen do).
- */
-#define PG_SOMAXCONN	10000
-
-/*
- * You can try changing this if you have a machine with bytes of
- * another size, but no guarantee...
- */
-#define BITS_PER_BYTE		8
-
-/*
- * Preferred alignment for disk I/O buffers.  On some CPUs, copies between
- * user space and kernel space are significantly faster if the user buffer
- * is aligned on a larger-than-MAXALIGN boundary.  Ideally this should be
- * a platform-dependent value, but for now we just hard-wire it.
- */
-#define ALIGNOF_BUFFER	32
-
-/*
- * If EXEC_BACKEND is defined, the postmaster uses an alternative method for
- * starting subprocesses: Instead of simply using fork(), as is standard on
- * Unix platforms, it uses fork()+exec() or something equivalent on Windows,
- * as well as lots of extra code to bring the required global state to those
- * new processes.  This must be enabled on Windows (because there is no
- * fork()).  On other platforms, it's only useful for verifying those
- * otherwise Windows-specific code paths.
- */
-#if defined(WIN32) && !defined(__CYGWIN__)
-#define EXEC_BACKEND
-#endif
-
-/*
- * Define this if your operating system supports link()
- */
-#if !defined(WIN32) && !defined(__CYGWIN__)
-#define HAVE_WORKING_LINK 1
-#endif
-
-/*
- * USE_POSIX_FADVISE controls whether Postgres will attempt to use the
- * posix_fadvise() kernel call.  Usually the automatic configure tests are
- * sufficient, but some older Linux distributions had broken versions of
- * posix_fadvise().  If necessary you can remove the #define here.
- */
-#if HAVE_DECL_POSIX_FADVISE && defined(HAVE_POSIX_FADVISE)
-#define USE_POSIX_FADVISE
-#endif
-
-/*
- * USE_PREFETCH code should be compiled only if we have a way to implement
- * prefetching.  (This is decoupled from USE_POSIX_FADVISE because there
- * might in future be support for alternative low-level prefetch APIs.
- * If you change this, you probably need to adjust the error message in
- * check_effective_io_concurrency.)
- */
-#ifdef USE_POSIX_FADVISE
-#define USE_PREFETCH
-#endif
-
-/*
- * Default and maximum values for backend_flush_after, bgwriter_flush_after
- * and checkpoint_flush_after; measured in blocks.  Currently, these are
- * enabled by default if sync_file_range() exists, ie, only on Linux.  Perhaps
- * we could also enable by default if we have mmap and msync(MS_ASYNC)?
- */
-#ifdef HAVE_SYNC_FILE_RANGE
-#define DEFAULT_BACKEND_FLUSH_AFTER 0	/* never enabled by default */
-#define DEFAULT_BGWRITER_FLUSH_AFTER 64
-#define DEFAULT_CHECKPOINT_FLUSH_AFTER 32
-#else
-#define DEFAULT_BACKEND_FLUSH_AFTER 0
-#define DEFAULT_BGWRITER_FLUSH_AFTER 0
-#define DEFAULT_CHECKPOINT_FLUSH_AFTER 0
-#endif
-/* upper limit for all three variables */
-#define WRITEBACK_MAX_PENDING_FLUSHES 256
-
-/*
- * USE_SSL code should be compiled only when compiling with an SSL
- * implementation.  (Currently, only OpenSSL is supported, but we might add
- * more implementations in the future.)
- */
-#ifdef USE_OPENSSL
-#define USE_SSL
-#endif
-
-/*
- * This is the default directory in which AF_UNIX socket files are
- * placed.  Caution: changing this risks breaking your existing client
- * applications, which are likely to continue to look in the old
- * directory.  But if you just hate the idea of sockets in /tmp,
- * here's where to twiddle it.  You can also override this at runtime
- * with the postmaster's -k switch.
- *
- * If set to an empty string, then AF_UNIX sockets are not used by default: A
- * server will not create an AF_UNIX socket unless the run-time configuration
- * is changed, a client will connect via TCP/IP by default and will only use
- * an AF_UNIX socket if one is explicitly specified.
- *
- * This is done by default on Windows because there is no good standard
- * location for AF_UNIX sockets and many installations on Windows don't
- * support them yet.
- */
-#ifndef WIN32
-#define DEFAULT_PGSOCKET_DIR  "/tmp"
-#else
-#define DEFAULT_PGSOCKET_DIR ""
-#endif
-
-/*
- * This is the default event source for Windows event log.
- */
-#define DEFAULT_EVENT_SOURCE  "PostgreSQL"
-
-/*
- * The random() function is expected to yield values between 0 and
- * MAX_RANDOM_VALUE.  Currently, all known implementations yield
- * 0..2^31-1, so we just hardwire this constant.  We could do a
- * configure test if it proves to be necessary.  CAUTION: Think not to
- * replace this with RAND_MAX.  RAND_MAX defines the maximum value of
- * the older rand() function, which is often different from --- and
- * considerably inferior to --- random().
- */
-#define MAX_RANDOM_VALUE  PG_INT32_MAX
-
-/*
- * On PPC machines, decide whether to use the mutex hint bit in LWARX
- * instructions.  Setting the hint bit will slightly improve spinlock
- * performance on POWER6 and later machines, but does nothing before that,
- * and will result in illegal-instruction failures on some pre-POWER4
- * machines.  By default we use the hint bit when building for 64-bit PPC,
- * which should be safe in nearly all cases.  You might want to override
- * this if you are building 32-bit code for a known-recent PPC machine.
- */
-#ifdef HAVE_PPC_LWARX_MUTEX_HINT	/* must have assembler support in any case */
-#if defined(__ppc64__) || defined(__powerpc64__)
-#define USE_PPC_LWARX_MUTEX_HINT
-#endif
-#endif
-
-/*
- * On PPC machines, decide whether to use LWSYNC instructions in place of
- * ISYNC and SYNC.  This provides slightly better performance, but will
- * result in illegal-instruction failures on some pre-POWER4 machines.
- * By default we use LWSYNC when building for 64-bit PPC, which should be
- * safe in nearly all cases.
- */
-#if defined(__ppc64__) || defined(__powerpc64__)
-#define USE_PPC_LWSYNC
-#endif
-
-/*
- * Assumed cache line size. This doesn't affect correctness, but can be used
- * for low-level optimizations. Currently, this is used to pad some data
- * structures in xlog.c, to ensure that highly-contended fields are on
- * different cache lines. Too small a value can hurt performance due to false
- * sharing, while the only downside of too large a value is a few bytes of
- * wasted memory. The default is 128, which should be large enough for all
- * supported platforms.
- */
-#define PG_CACHE_LINE_SIZE		128
-
-/*
- *------------------------------------------------------------------------
- * The following symbols are for enabling debugging code, not for
- * controlling user-visible features or resource limits.
- *------------------------------------------------------------------------
- */
-
-/*
- * Include Valgrind "client requests", mostly in the memory allocator, so
- * Valgrind understands PostgreSQL memory contexts.  This permits detecting
- * memory errors that Valgrind would not detect on a vanilla build.  See also
- * src/tools/valgrind.supp.  "make installcheck" runs 20-30x longer under
- * Valgrind.  Note that USE_VALGRIND slowed older versions of Valgrind by an
- * additional order of magnitude; Valgrind 3.8.1 does not have this problem.
- * The client requests fall in hot code paths, so USE_VALGRIND also slows
- * native execution by a few percentage points.
- *
- * You should normally use MEMORY_CONTEXT_CHECKING with USE_VALGRIND;
- * instrumentation of repalloc() is inferior without it.
- */
-/* #define USE_VALGRIND */
-
-/*
- * Define this to cause pfree()'d memory to be cleared immediately, to
- * facilitate catching bugs that refer to already-freed values.
- * Right now, this gets defined automatically if --enable-cassert.
- */
-#ifdef USE_ASSERT_CHECKING
-#define CLOBBER_FREED_MEMORY
-#endif
-
-/*
- * Define this to check memory allocation errors (scribbling on more
- * bytes than were allocated).  Right now, this gets defined
- * automatically if --enable-cassert or USE_VALGRIND.
- */
-#if defined(USE_ASSERT_CHECKING) || defined(USE_VALGRIND)
-#define MEMORY_CONTEXT_CHECKING
-#endif
-
-/*
- * Define this to cause palloc()'d memory to be filled with random data, to
- * facilitate catching code that depends on the contents of uninitialized
- * memory.  Caution: this is horrendously expensive.
- */
-/* #define RANDOMIZE_ALLOCATED_MEMORY */
-
-/*
- * Define this to force all parse and plan trees to be passed through
- * copyObject(), to facilitate catching errors and omissions in
- * copyObject().
- */
-/* #define COPY_PARSE_PLAN_TREES */
-
-/*
- * Define this to force all parse and plan trees to be passed through
- * outfuncs.c/readfuncs.c, to facilitate catching errors and omissions in
- * those modules.
- */
-/* #define WRITE_READ_PARSE_PLAN_TREES */
-
-/*
- * Define this to force all raw parse trees for DML statements to be scanned
- * by raw_expression_tree_walker(), to facilitate catching errors and
- * omissions in that function.
- */
-/* #define RAW_EXPRESSION_COVERAGE_TEST */
-
-/*
- * Enable debugging print statements for lock-related operations.
- */
-/* #define LOCK_DEBUG */
-
-/*
- * Enable debugging print statements for WAL-related operations; see
- * also the wal_debug GUC var.
- */
-/* #define WAL_DEBUG */
-
-/*
- * Enable tracing of resource consumption during sort operations;
- * see also the trace_sort GUC var.  For 8.1 this is enabled by default.
- */
-#define TRACE_SORT 1
-
-/*
- * Enable tracing of syncscan operations (see also the trace_syncscan GUC var).
- */
-/* #define TRACE_SYNCSCAN */

data/ext/pg_query/include/pg_config_os.h

@@ -1,8 +0,0 @@
-/* src/include/port/darwin.h */
-
-#define __darwin__	1
-
-#if HAVE_DECL_F_FULLFSYNC		/* not present before macOS 10.3 */
-#define HAVE_FSYNC_WRITETHROUGH
-
-#endif

data/ext/pg_query/include/pg_getopt.h

@@ -1,56 +0,0 @@
-/*
- * Postgres files that use getopt(3) always include this file.
- * We must cope with three different scenarios:
- * 1. We're using the platform's getopt(), and we should just import the
- *    appropriate declarations.
- * 2. The platform lacks getopt(), and we must declare everything.
- * 3. The platform has getopt(), but we're not using it because we don't
- *    like its behavior.  The declarations we make here must be compatible
- *    with both the platform's getopt() and our src/port/getopt.c.
- *
- * Portions Copyright (c) 1987, 1993, 1994
- * The Regents of the University of California.  All rights reserved.
- *
- * Portions Copyright (c) 2003-2020, PostgreSQL Global Development Group
- *
- * src/include/pg_getopt.h
- */
-#ifndef PG_GETOPT_H
-#define PG_GETOPT_H
-
-/* POSIX says getopt() is provided by unistd.h */
-#include <unistd.h>
-
-/* rely on the system's getopt.h if present */
-#ifdef HAVE_GETOPT_H
-#include <getopt.h>
-#endif
-
-/*
- * If we have <getopt.h>, assume it declares these variables, else do that
- * ourselves.  (We used to just declare them unconditionally, but Cygwin
- * doesn't like that.)
- */
-#ifndef HAVE_GETOPT_H
-
-extern char *optarg;
-extern int	optind;
-extern int	opterr;
-extern int	optopt;
-
-#endif							/* HAVE_GETOPT_H */
-
-/*
- * Some platforms have optreset but fail to declare it in <getopt.h>, so cope.
- * Cygwin, however, doesn't like this either.
- */
-#if defined(HAVE_INT_OPTRESET) && !defined(__CYGWIN__)
-extern int	optreset;
-#endif
-
-/* Provide getopt() declaration if the platform doesn't have it */
-#ifndef HAVE_GETOPT
-extern int	getopt(int nargc, char *const *nargv, const char *ostr);
-#endif
-
-#endif							/* PG_GETOPT_H */

data/ext/pg_query/include/pg_trace.h

@@ -1,17 +0,0 @@
-/* ----------
- *	pg_trace.h
- *
- *	Definitions for the PostgreSQL tracing framework
- *
- *	Copyright (c) 2006-2020, PostgreSQL Global Development Group
- *
- *	src/include/pg_trace.h
- * ----------
- */
-
-#ifndef PG_TRACE_H
-#define PG_TRACE_H
-
-#include "utils/probes.h"		/* pgrminclude ignore */
-
-#endif							/* PG_TRACE_H */