pg_query 2.2.0 → 6.1.0

data/ext/pg_query/include/miscadmin.h

@@ -1,489 +0,0 @@
-/*-------------------------------------------------------------------------
- *
- * miscadmin.h
- *	  This file contains general postgres administration and initialization
- *	  stuff that used to be spread out between the following files:
- *		globals.h						global variables
- *		pdir.h							directory path crud
- *		pinit.h							postgres initialization
- *		pmod.h							processing modes
- *	  Over time, this has also become the preferred place for widely known
- *	  resource-limitation stuff, such as work_mem and check_stack_depth().
- *
- * Portions Copyright (c) 1996-2020, PostgreSQL Global Development Group
- * Portions Copyright (c) 1994, Regents of the University of California
- *
- * src/include/miscadmin.h
- *
- * NOTES
- *	  some of the information in this file should be moved to other files.
- *
- *-------------------------------------------------------------------------
- */
-#ifndef MISCADMIN_H
-#define MISCADMIN_H
-
-#include <signal.h>
-
-#include "datatype/timestamp.h" /* for TimestampTz */
-#include "pgtime.h"				/* for pg_time_t */
-
-
-#define InvalidPid				(-1)
-
-
-/*****************************************************************************
- *	  System interrupt and critical section handling
- *
- * There are two types of interrupts that a running backend needs to accept
- * without messing up its state: QueryCancel (SIGINT) and ProcDie (SIGTERM).
- * In both cases, we need to be able to clean up the current transaction
- * gracefully, so we can't respond to the interrupt instantaneously ---
- * there's no guarantee that internal data structures would be self-consistent
- * if the code is interrupted at an arbitrary instant.  Instead, the signal
- * handlers set flags that are checked periodically during execution.
- *
- * The CHECK_FOR_INTERRUPTS() macro is called at strategically located spots
- * where it is normally safe to accept a cancel or die interrupt.  In some
- * cases, we invoke CHECK_FOR_INTERRUPTS() inside low-level subroutines that
- * might sometimes be called in contexts that do *not* want to allow a cancel
- * or die interrupt.  The HOLD_INTERRUPTS() and RESUME_INTERRUPTS() macros
- * allow code to ensure that no cancel or die interrupt will be accepted,
- * even if CHECK_FOR_INTERRUPTS() gets called in a subroutine.  The interrupt
- * will be held off until CHECK_FOR_INTERRUPTS() is done outside any
- * HOLD_INTERRUPTS() ... RESUME_INTERRUPTS() section.
- *
- * There is also a mechanism to prevent query cancel interrupts, while still
- * allowing die interrupts: HOLD_CANCEL_INTERRUPTS() and
- * RESUME_CANCEL_INTERRUPTS().
- *
- * Note that ProcessInterrupts() has also acquired a number of tasks that
- * do not necessarily cause a query-cancel-or-die response.  Hence, it's
- * possible that it will just clear InterruptPending and return.
- *
- * INTERRUPTS_PENDING_CONDITION() can be checked to see whether an
- * interrupt needs to be serviced, without trying to do so immediately.
- * Some callers are also interested in INTERRUPTS_CAN_BE_PROCESSED(),
- * which tells whether ProcessInterrupts is sure to clear the interrupt.
- *
- * Special mechanisms are used to let an interrupt be accepted when we are
- * waiting for a lock or when we are waiting for command input (but, of
- * course, only if the interrupt holdoff counter is zero).  See the
- * related code for details.
- *
- * A lost connection is handled similarly, although the loss of connection
- * does not raise a signal, but is detected when we fail to write to the
- * socket. If there was a signal for a broken connection, we could make use of
- * it by setting ClientConnectionLost in the signal handler.
- *
- * A related, but conceptually distinct, mechanism is the "critical section"
- * mechanism.  A critical section not only holds off cancel/die interrupts,
- * but causes any ereport(ERROR) or ereport(FATAL) to become ereport(PANIC)
- * --- that is, a system-wide reset is forced.  Needless to say, only really
- * *critical* code should be marked as a critical section!	Currently, this
- * mechanism is only used for XLOG-related code.
- *
- *****************************************************************************/
-
-/* in globals.c */
-/* these are marked volatile because they are set by signal handlers: */
-extern PGDLLIMPORT __thread volatile sig_atomic_t InterruptPending;
-extern PGDLLIMPORT volatile sig_atomic_t QueryCancelPending;
-extern PGDLLIMPORT volatile sig_atomic_t ProcDiePending;
-extern PGDLLIMPORT volatile sig_atomic_t IdleInTransactionSessionTimeoutPending;
-extern PGDLLIMPORT volatile sig_atomic_t ProcSignalBarrierPending;
-
-extern PGDLLIMPORT volatile sig_atomic_t ClientConnectionLost;
-
-/* these are marked volatile because they are examined by signal handlers: */
-extern PGDLLIMPORT __thread volatile uint32 InterruptHoldoffCount;
-extern PGDLLIMPORT __thread volatile uint32 QueryCancelHoldoffCount;
-extern PGDLLIMPORT __thread volatile uint32 CritSectionCount;
-
-/* in tcop/postgres.c */
-extern void ProcessInterrupts(void);
-
-/* Test whether an interrupt is pending */
-#ifndef WIN32
-#define INTERRUPTS_PENDING_CONDITION() \
-	(unlikely(InterruptPending))
-#else
-#define INTERRUPTS_PENDING_CONDITION() \
-	(unlikely(UNBLOCKED_SIGNAL_QUEUE()) ? pgwin32_dispatch_queued_signals() : 0, \
-	 unlikely(InterruptPending))
-#endif
-
-/* Service interrupt, if one is pending and it's safe to service it now */
-#define CHECK_FOR_INTERRUPTS() \
-do { \
-	if (INTERRUPTS_PENDING_CONDITION()) \
-		ProcessInterrupts(); \
-} while(0)
-
-/* Is ProcessInterrupts() guaranteed to clear InterruptPending? */
-#define INTERRUPTS_CAN_BE_PROCESSED() \
-	(InterruptHoldoffCount == 0 && CritSectionCount == 0 && \
-	 QueryCancelHoldoffCount == 0)
-
-#define HOLD_INTERRUPTS()  (InterruptHoldoffCount++)
-
-#define RESUME_INTERRUPTS() \
-do { \
-	Assert(InterruptHoldoffCount > 0); \
-	InterruptHoldoffCount--; \
-} while(0)
-
-#define HOLD_CANCEL_INTERRUPTS()  (QueryCancelHoldoffCount++)
-
-#define RESUME_CANCEL_INTERRUPTS() \
-do { \
-	Assert(QueryCancelHoldoffCount > 0); \
-	QueryCancelHoldoffCount--; \
-} while(0)
-
-#define START_CRIT_SECTION()  (CritSectionCount++)
-
-#define END_CRIT_SECTION() \
-do { \
-	Assert(CritSectionCount > 0); \
-	CritSectionCount--; \
-} while(0)
-
-
-/*****************************************************************************
- *	  globals.h --															 *
- *****************************************************************************/
-
-/*
- * from utils/init/globals.c
- */
-extern PGDLLIMPORT pid_t PostmasterPid;
-extern PGDLLIMPORT __thread  bool IsPostmasterEnvironment;
-extern PGDLLIMPORT bool IsUnderPostmaster;
-extern PGDLLIMPORT bool IsBackgroundWorker;
-extern PGDLLIMPORT bool IsBinaryUpgrade;
-
-extern PGDLLIMPORT __thread  bool ExitOnAnyError;
-
-extern PGDLLIMPORT char *DataDir;
-extern PGDLLIMPORT int data_directory_mode;
-
-extern PGDLLIMPORT int NBuffers;
-extern PGDLLIMPORT int MaxBackends;
-extern PGDLLIMPORT int MaxConnections;
-extern PGDLLIMPORT int max_worker_processes;
-extern PGDLLIMPORT int max_parallel_workers;
-
-extern PGDLLIMPORT int MyProcPid;
-extern PGDLLIMPORT pg_time_t MyStartTime;
-extern PGDLLIMPORT TimestampTz MyStartTimestamp;
-extern PGDLLIMPORT struct Port *MyProcPort;
-extern PGDLLIMPORT struct Latch *MyLatch;
-extern int32 MyCancelKey;
-extern int	MyPMChildSlot;
-
-extern char OutputFileName[];
-extern PGDLLIMPORT char my_exec_path[];
-extern char pkglib_path[];
-
-#ifdef EXEC_BACKEND
-extern char postgres_exec_path[];
-#endif
-
-/*
- * done in storage/backendid.h for now.
- *
- * extern BackendId    MyBackendId;
- */
-extern PGDLLIMPORT Oid MyDatabaseId;
-
-extern PGDLLIMPORT Oid MyDatabaseTableSpace;
-
-/*
- * Date/Time Configuration
- *
- * DateStyle defines the output formatting choice for date/time types:
- *	USE_POSTGRES_DATES specifies traditional Postgres format
- *	USE_ISO_DATES specifies ISO-compliant format
- *	USE_SQL_DATES specifies Oracle/Ingres-compliant format
- *	USE_GERMAN_DATES specifies German-style dd.mm/yyyy
- *
- * DateOrder defines the field order to be assumed when reading an
- * ambiguous date (anything not in YYYY-MM-DD format, with a four-digit
- * year field first, is taken to be ambiguous):
- *	DATEORDER_YMD specifies field order yy-mm-dd
- *	DATEORDER_DMY specifies field order dd-mm-yy ("European" convention)
- *	DATEORDER_MDY specifies field order mm-dd-yy ("US" convention)
- *
- * In the Postgres and SQL DateStyles, DateOrder also selects output field
- * order: day comes before month in DMY style, else month comes before day.
- *
- * The user-visible "DateStyle" run-time parameter subsumes both of these.
- */
-
-/* valid DateStyle values */
-#define USE_POSTGRES_DATES		0
-#define USE_ISO_DATES			1
-#define USE_SQL_DATES			2
-#define USE_GERMAN_DATES		3
-#define USE_XSD_DATES			4
-
-/* valid DateOrder values */
-#define DATEORDER_YMD			0
-#define DATEORDER_DMY			1
-#define DATEORDER_MDY			2
-
-extern PGDLLIMPORT int DateStyle;
-extern PGDLLIMPORT int DateOrder;
-
-/*
- * IntervalStyles
- *	 INTSTYLE_POSTGRES			   Like Postgres < 8.4 when DateStyle = 'iso'
- *	 INTSTYLE_POSTGRES_VERBOSE	   Like Postgres < 8.4 when DateStyle != 'iso'
- *	 INTSTYLE_SQL_STANDARD		   SQL standard interval literals
- *	 INTSTYLE_ISO_8601			   ISO-8601-basic formatted intervals
- */
-#define INTSTYLE_POSTGRES			0
-#define INTSTYLE_POSTGRES_VERBOSE	1
-#define INTSTYLE_SQL_STANDARD		2
-#define INTSTYLE_ISO_8601			3
-
-extern PGDLLIMPORT int IntervalStyle;
-
-#define MAXTZLEN		10		/* max TZ name len, not counting tr. null */
-
-extern bool enableFsync;
-extern PGDLLIMPORT bool allowSystemTableMods;
-extern PGDLLIMPORT int work_mem;
-extern PGDLLIMPORT double hash_mem_multiplier;
-extern PGDLLIMPORT int maintenance_work_mem;
-extern PGDLLIMPORT int max_parallel_maintenance_workers;
-
-extern int	VacuumCostPageHit;
-extern int	VacuumCostPageMiss;
-extern int	VacuumCostPageDirty;
-extern int	VacuumCostLimit;
-extern double VacuumCostDelay;
-
-extern int64 VacuumPageHit;
-extern int64 VacuumPageMiss;
-extern int64 VacuumPageDirty;
-
-extern int	VacuumCostBalance;
-extern bool VacuumCostActive;
-
-extern double vacuum_cleanup_index_scale_factor;
-
-
-/* in tcop/postgres.c */
-
-#if defined(__ia64__) || defined(__ia64)
-typedef struct
-{
-	char	   *stack_base_ptr;
-	char	   *register_stack_base_ptr;
-} pg_stack_base_t;
-#else
-typedef char *pg_stack_base_t;
-#endif
-
-extern pg_stack_base_t set_stack_base(void);
-extern void restore_stack_base(pg_stack_base_t base);
-extern void check_stack_depth(void);
-extern bool stack_is_too_deep(void);
-
-/* in tcop/utility.c */
-extern void PreventCommandIfReadOnly(const char *cmdname);
-extern void PreventCommandIfParallelMode(const char *cmdname);
-extern void PreventCommandDuringRecovery(const char *cmdname);
-
-/* in utils/misc/guc.c */
-extern int	trace_recovery_messages;
-extern int	trace_recovery(int trace_level);
-
-/*****************************************************************************
- *	  pdir.h --																 *
- *			POSTGRES directory path definitions.                             *
- *****************************************************************************/
-
-/* flags to be OR'd to form sec_context */
-#define SECURITY_LOCAL_USERID_CHANGE	0x0001
-#define SECURITY_RESTRICTED_OPERATION	0x0002
-#define SECURITY_NOFORCE_RLS			0x0004
-
-extern char *DatabasePath;
-
-/* now in utils/init/miscinit.c */
-extern void InitPostmasterChild(void);
-extern void InitStandaloneProcess(const char *argv0);
-extern void SwitchToSharedLatch(void);
-extern void SwitchBackToLocalLatch(void);
-
-typedef enum BackendType
-{
-	B_INVALID = 0,
-	B_AUTOVAC_LAUNCHER,
-	B_AUTOVAC_WORKER,
-	B_BACKEND,
-	B_BG_WORKER,
-	B_BG_WRITER,
-	B_CHECKPOINTER,
-	B_STARTUP,
-	B_WAL_RECEIVER,
-	B_WAL_SENDER,
-	B_WAL_WRITER,
-	B_ARCHIVER,
-	B_STATS_COLLECTOR,
-	B_LOGGER,
-} BackendType;
-
-extern BackendType MyBackendType;
-
-extern const char *GetBackendTypeDesc(BackendType backendType);
-
-extern void SetDatabasePath(const char *path);
-extern void checkDataDir(void);
-extern void SetDataDir(const char *dir);
-extern void ChangeToDataDir(void);
-
-extern char *GetUserNameFromId(Oid roleid, bool noerr);
-extern Oid	GetUserId(void);
-extern Oid	GetOuterUserId(void);
-extern Oid	GetSessionUserId(void);
-extern Oid	GetAuthenticatedUserId(void);
-extern void GetUserIdAndSecContext(Oid *userid, int *sec_context);
-extern void SetUserIdAndSecContext(Oid userid, int sec_context);
-extern bool InLocalUserIdChange(void);
-extern bool InSecurityRestrictedOperation(void);
-extern bool InNoForceRLSOperation(void);
-extern void GetUserIdAndContext(Oid *userid, bool *sec_def_context);
-extern void SetUserIdAndContext(Oid userid, bool sec_def_context);
-extern void InitializeSessionUserId(const char *rolename, Oid useroid);
-extern void InitializeSessionUserIdStandalone(void);
-extern void SetSessionAuthorization(Oid userid, bool is_superuser);
-extern Oid	GetCurrentRoleId(void);
-extern void SetCurrentRoleId(Oid roleid, bool is_superuser);
-
-/* in utils/misc/superuser.c */
-extern bool superuser(void);	/* current user is superuser */
-extern bool superuser_arg(Oid roleid);	/* given user is superuser */
-
-
-/*****************************************************************************
- *	  pmod.h --																 *
- *			POSTGRES processing mode definitions.                            *
- *****************************************************************************/
-
-/*
- * Description:
- *		There are three processing modes in POSTGRES.  They are
- * BootstrapProcessing or "bootstrap," InitProcessing or
- * "initialization," and NormalProcessing or "normal."
- *
- * The first two processing modes are used during special times. When the
- * system state indicates bootstrap processing, transactions are all given
- * transaction id "one" and are consequently guaranteed to commit. This mode
- * is used during the initial generation of template databases.
- *
- * Initialization mode: used while starting a backend, until all normal
- * initialization is complete.  Some code behaves differently when executed
- * in this mode to enable system bootstrapping.
- *
- * If a POSTGRES backend process is in normal mode, then all code may be
- * executed normally.
- */
-
-typedef enum ProcessingMode
-{
-	BootstrapProcessing,		/* bootstrap creation of template database */
-	InitProcessing,				/* initializing system */
-	NormalProcessing			/* normal processing */
-} ProcessingMode;
-
-extern ProcessingMode Mode;
-
-#define IsBootstrapProcessingMode() (Mode == BootstrapProcessing)
-#define IsInitProcessingMode()		(Mode == InitProcessing)
-#define IsNormalProcessingMode()	(Mode == NormalProcessing)
-
-#define GetProcessingMode() Mode
-
-#define SetProcessingMode(mode) \
-	do { \
-		AssertArg((mode) == BootstrapProcessing || \
-				  (mode) == InitProcessing || \
-				  (mode) == NormalProcessing); \
-		Mode = (mode); \
-	} while(0)
-
-
-/*
- * Auxiliary-process type identifiers.  These used to be in bootstrap.h
- * but it seems saner to have them here, with the ProcessingMode stuff.
- * The MyAuxProcType global is defined and set in bootstrap.c.
- */
-
-typedef enum
-{
-	NotAnAuxProcess = -1,
-	CheckerProcess = 0,
-	BootstrapProcess,
-	StartupProcess,
-	BgWriterProcess,
-	CheckpointerProcess,
-	WalWriterProcess,
-	WalReceiverProcess,
-
-	NUM_AUXPROCTYPES			/* Must be last! */
-} AuxProcType;
-
-extern AuxProcType MyAuxProcType;
-
-#define AmBootstrapProcess()		(MyAuxProcType == BootstrapProcess)
-#define AmStartupProcess()			(MyAuxProcType == StartupProcess)
-#define AmBackgroundWriterProcess() (MyAuxProcType == BgWriterProcess)
-#define AmCheckpointerProcess()		(MyAuxProcType == CheckpointerProcess)
-#define AmWalWriterProcess()		(MyAuxProcType == WalWriterProcess)
-#define AmWalReceiverProcess()		(MyAuxProcType == WalReceiverProcess)
-
-
-/*****************************************************************************
- *	  pinit.h --															 *
- *			POSTGRES initialization and cleanup definitions.                 *
- *****************************************************************************/
-
-/* in utils/init/postinit.c */
-extern void pg_split_opts(char **argv, int *argcp, const char *optstr);
-extern void InitializeMaxBackends(void);
-extern void InitPostgres(const char *in_dbname, Oid dboid, const char *username,
-						 Oid useroid, char *out_dbname, bool override_allow_connections);
-extern void BaseInit(void);
-
-/* in utils/init/miscinit.c */
-extern bool IgnoreSystemIndexes;
-extern PGDLLIMPORT bool process_shared_preload_libraries_in_progress;
-extern char *session_preload_libraries_string;
-extern char *shared_preload_libraries_string;
-extern char *local_preload_libraries_string;
-
-extern void CreateDataDirLockFile(bool amPostmaster);
-extern void CreateSocketLockFile(const char *socketfile, bool amPostmaster,
-								 const char *socketDir);
-extern void TouchSocketLockFiles(void);
-extern void AddToDataDirLockFile(int target_line, const char *str);
-extern bool RecheckDataDirLockFile(void);
-extern void ValidatePgVersion(const char *path);
-extern void process_shared_preload_libraries(void);
-extern void process_session_preload_libraries(void);
-extern void pg_bindtextdomain(const char *domain);
-extern bool has_rolreplication(Oid roleid);
-
-/* in access/transam/xlog.c */
-extern bool BackupInProgress(void);
-extern void CancelBackup(void);
-
-/* in executor/nodeHash.c */
-extern size_t get_hash_memory_limit(void);
-extern int	get_hash_mem(void);
-
-#endif							/* MISCADMIN_H */

data/ext/pg_query/include/nodes/bitmapset.h

@@ -1,122 +0,0 @@
-/*-------------------------------------------------------------------------
- *
- * bitmapset.h
- *	  PostgreSQL generic bitmap set package
- *
- * A bitmap set can represent any set of nonnegative integers, although
- * it is mainly intended for sets where the maximum value is not large,
- * say at most a few hundred.  By convention, a NULL pointer is always
- * accepted by all operations to represent the empty set.  (But beware
- * that this is not the only representation of the empty set.  Use
- * bms_is_empty() in preference to testing for NULL.)
- *
- *
- * Copyright (c) 2003-2020, PostgreSQL Global Development Group
- *
- * src/include/nodes/bitmapset.h
- *
- *-------------------------------------------------------------------------
- */
-#ifndef BITMAPSET_H
-#define BITMAPSET_H
-
-/*
- * Forward decl to save including pg_list.h
- */
-struct List;
-
-/*
- * Data representation
- *
- * Larger bitmap word sizes generally give better performance, so long as
- * they're not wider than the processor can handle efficiently.  We use
- * 64-bit words if pointers are that large, else 32-bit words.
- */
-#if SIZEOF_VOID_P >= 8
-
-#define BITS_PER_BITMAPWORD 64
-typedef uint64 bitmapword;		/* must be an unsigned type */
-typedef int64 signedbitmapword; /* must be the matching signed type */
-
-#else
-
-#define BITS_PER_BITMAPWORD 32
-typedef uint32 bitmapword;		/* must be an unsigned type */
-typedef int32 signedbitmapword; /* must be the matching signed type */
-
-#endif
-
-typedef struct Bitmapset
-{
-	int			nwords;			/* number of words in array */
-	bitmapword	words[FLEXIBLE_ARRAY_MEMBER];	/* really [nwords] */
-} Bitmapset;
-
-
-/* result of bms_subset_compare */
-typedef enum
-{
-	BMS_EQUAL,					/* sets are equal */
-	BMS_SUBSET1,				/* first set is a subset of the second */
-	BMS_SUBSET2,				/* second set is a subset of the first */
-	BMS_DIFFERENT				/* neither set is a subset of the other */
-} BMS_Comparison;
-
-/* result of bms_membership */
-typedef enum
-{
-	BMS_EMPTY_SET,				/* 0 members */
-	BMS_SINGLETON,				/* 1 member */
-	BMS_MULTIPLE				/* >1 member */
-} BMS_Membership;
-
-
-/*
- * function prototypes in nodes/bitmapset.c
- */
-
-extern Bitmapset *bms_copy(const Bitmapset *a);
-extern bool bms_equal(const Bitmapset *a, const Bitmapset *b);
-extern int	bms_compare(const Bitmapset *a, const Bitmapset *b);
-extern Bitmapset *bms_make_singleton(int x);
-extern void bms_free(Bitmapset *a);
-
-extern Bitmapset *bms_union(const Bitmapset *a, const Bitmapset *b);
-extern Bitmapset *bms_intersect(const Bitmapset *a, const Bitmapset *b);
-extern Bitmapset *bms_difference(const Bitmapset *a, const Bitmapset *b);
-extern bool bms_is_subset(const Bitmapset *a, const Bitmapset *b);
-extern BMS_Comparison bms_subset_compare(const Bitmapset *a, const Bitmapset *b);
-extern bool bms_is_member(int x, const Bitmapset *a);
-extern int	bms_member_index(Bitmapset *a, int x);
-extern bool bms_overlap(const Bitmapset *a, const Bitmapset *b);
-extern bool bms_overlap_list(const Bitmapset *a, const struct List *b);
-extern bool bms_nonempty_difference(const Bitmapset *a, const Bitmapset *b);
-extern int	bms_singleton_member(const Bitmapset *a);
-extern bool bms_get_singleton_member(const Bitmapset *a, int *member);
-extern int	bms_num_members(const Bitmapset *a);
-
-/* optimized tests when we don't need to know exact membership count: */
-extern BMS_Membership bms_membership(const Bitmapset *a);
-extern bool bms_is_empty(const Bitmapset *a);
-
-/* these routines recycle (modify or free) their non-const inputs: */
-
-extern Bitmapset *bms_add_member(Bitmapset *a, int x);
-extern Bitmapset *bms_del_member(Bitmapset *a, int x);
-extern Bitmapset *bms_add_members(Bitmapset *a, const Bitmapset *b);
-extern Bitmapset *bms_add_range(Bitmapset *a, int lower, int upper);
-extern Bitmapset *bms_int_members(Bitmapset *a, const Bitmapset *b);
-extern Bitmapset *bms_del_members(Bitmapset *a, const Bitmapset *b);
-extern Bitmapset *bms_join(Bitmapset *a, Bitmapset *b);
-
-/* support for iterating through the integer elements of a set: */
-extern int	bms_first_member(Bitmapset *a);
-extern int	bms_next_member(const Bitmapset *a, int prevbit);
-extern int	bms_prev_member(const Bitmapset *a, int prevbit);
-
-/* support for hashtables using Bitmapsets as keys: */
-extern uint32 bms_hash_value(const Bitmapset *a);
-extern uint32 bitmap_hash(const void *key, Size keysize);
-extern int	bitmap_match(const void *key1, const void *key2, Size keysize);
-
-#endif							/* BITMAPSET_H */