pango 0.90.2-x86-mingw32

data/vendor/local/include/freetype2/freetype/ftmoderr.h

@@ -0,0 +1,155 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftmoderr.h                                                             */
+/*                                                                         */
+/*    FreeType module error offsets (specification).                       */
+/*                                                                         */
+/*  Copyright 2001, 2002, 2003, 2004, 2005 by                              */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* This file is used to define the FreeType module error offsets.        */
+  /*                                                                       */
+  /* The lower byte gives the error code, the higher byte gives the        */
+  /* module.  The base module has error offset 0.  For example, the error  */
+  /* `FT_Err_Invalid_File_Format' has value 0x003, the error               */
+  /* `TT_Err_Invalid_File_Format' has value 0x1103, the error              */
+  /* `T1_Err_Invalid_File_Format' has value 0x1203, etc.                   */
+  /*                                                                       */
+  /* Undefine the macro FT_CONFIG_OPTION_USE_MODULE_ERRORS in ftoption.h   */
+  /* to make the higher byte always zero (disabling the module error       */
+  /* mechanism).                                                           */
+  /*                                                                       */
+  /* It can also be used to create a module error message table easily     */
+  /* with something like                                                   */
+  /*                                                                       */
+  /*   {                                                                   */
+  /*     #undef __FTMODERR_H__                                             */
+  /*     #define FT_MODERRDEF( e, v, s )  { FT_Mod_Err_ ## e, s },         */
+  /*     #define FT_MODERR_START_LIST     {                                */
+  /*     #define FT_MODERR_END_LIST       { 0, 0 } };                      */
+  /*                                                                       */
+  /*     const struct                                                      */
+  /*     {                                                                 */
+  /*       int          mod_err_offset;                                    */
+  /*       const char*  mod_err_msg                                        */
+  /*     } ft_mod_errors[] =                                               */
+  /*                                                                       */
+  /*     #include FT_MODULE_ERRORS_H                                       */
+  /*   }                                                                   */
+  /*                                                                       */
+  /* To use such a table, all errors must be ANDed with 0xFF00 to remove   */
+  /* the error code.                                                       */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+#ifndef __FTMODERR_H__
+#define __FTMODERR_H__
+
+
+  /*******************************************************************/
+  /*******************************************************************/
+  /*****                                                         *****/
+  /*****                       SETUP MACROS                      *****/
+  /*****                                                         *****/
+  /*******************************************************************/
+  /*******************************************************************/
+
+
+#undef  FT_NEED_EXTERN_C
+
+#ifndef FT_MODERRDEF
+
+#ifdef FT_CONFIG_OPTION_USE_MODULE_ERRORS
+#define FT_MODERRDEF( e, v, s )  FT_Mod_Err_ ## e = v,
+#else
+#define FT_MODERRDEF( e, v, s )  FT_Mod_Err_ ## e = 0,
+#endif
+
+#define FT_MODERR_START_LIST  enum {
+#define FT_MODERR_END_LIST    FT_Mod_Err_Max };
+
+#ifdef __cplusplus
+#define FT_NEED_EXTERN_C
+  extern "C" {
+#endif
+
+#endif /* !FT_MODERRDEF */
+
+
+  /*******************************************************************/
+  /*******************************************************************/
+  /*****                                                         *****/
+  /*****               LIST MODULE ERROR BASES                   *****/
+  /*****                                                         *****/
+  /*******************************************************************/
+  /*******************************************************************/
+
+
+#ifdef FT_MODERR_START_LIST
+  FT_MODERR_START_LIST
+#endif
+
+
+  FT_MODERRDEF( Base,      0x000, "base module" )
+  FT_MODERRDEF( Autofit,   0x100, "autofitter module" )
+  FT_MODERRDEF( BDF,       0x200, "BDF module" )
+  FT_MODERRDEF( Cache,     0x300, "cache module" )
+  FT_MODERRDEF( CFF,       0x400, "CFF module" )
+  FT_MODERRDEF( CID,       0x500, "CID module" )
+  FT_MODERRDEF( Gzip,      0x600, "Gzip module" )
+  FT_MODERRDEF( LZW,       0x700, "LZW module" )
+  FT_MODERRDEF( OTvalid,   0x800, "OpenType validation module" )
+  FT_MODERRDEF( PCF,       0x900, "PCF module" )
+  FT_MODERRDEF( PFR,       0xA00, "PFR module" )
+  FT_MODERRDEF( PSaux,     0xB00, "PS auxiliary module" )
+  FT_MODERRDEF( PShinter,  0xC00, "PS hinter module" )
+  FT_MODERRDEF( PSnames,   0xD00, "PS names module" )
+  FT_MODERRDEF( Raster,    0xE00, "raster module" )
+  FT_MODERRDEF( SFNT,      0xF00, "SFNT module" )
+  FT_MODERRDEF( Smooth,   0x1000, "smooth raster module" )
+  FT_MODERRDEF( TrueType, 0x1100, "TrueType module" )
+  FT_MODERRDEF( Type1,    0x1200, "Type 1 module" )
+  FT_MODERRDEF( Type42,   0x1300, "Type 42 module" )
+  FT_MODERRDEF( Winfonts, 0x1400, "Windows FON/FNT module" )
+
+
+#ifdef FT_MODERR_END_LIST
+  FT_MODERR_END_LIST
+#endif
+
+
+  /*******************************************************************/
+  /*******************************************************************/
+  /*****                                                         *****/
+  /*****                      CLEANUP                            *****/
+  /*****                                                         *****/
+  /*******************************************************************/
+  /*******************************************************************/
+
+
+#ifdef FT_NEED_EXTERN_C
+  }
+#endif
+
+#undef FT_MODERR_START_LIST
+#undef FT_MODERR_END_LIST
+#undef FT_MODERRDEF
+#undef FT_NEED_EXTERN_C
+
+
+#endif /* __FTMODERR_H__ */
+
+
+/* END */

data/vendor/local/include/freetype2/freetype/ftotval.h

@@ -0,0 +1,203 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftotval.h                                                              */
+/*                                                                         */
+/*    FreeType API for validating OpenType tables (specification).         */
+/*                                                                         */
+/*  Copyright 2004, 2005, 2006, 2007 by                                    */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+/***************************************************************************/
+/*                                                                         */
+/*                                                                         */
+/* Warning: This module might be moved to a different library in the       */
+/*          future to avoid a tight dependency between FreeType and the    */
+/*          OpenType specification.                                        */
+/*                                                                         */
+/*                                                                         */
+/***************************************************************************/
+
+
+#ifndef __FTOTVAL_H__
+#define __FTOTVAL_H__
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    ot_validation                                                      */
+  /*                                                                       */
+  /* <Title>                                                               */
+  /*    OpenType Validation                                                */
+  /*                                                                       */
+  /* <Abstract>                                                            */
+  /*    An API to validate OpenType tables.                                */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This section contains the declaration of functions to validate     */
+  /*    some OpenType tables (BASE, GDEF, GPOS, GSUB, JSTF, MATH).         */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+ /**********************************************************************
+  *
+  * @enum:
+  *    FT_VALIDATE_OTXXX
+  *
+  * @description:
+  *    A list of bit-field constants used with @FT_OpenType_Validate to
+  *    indicate which OpenType tables should be validated.
+  *
+  * @values:
+  *    FT_VALIDATE_BASE ::
+  *      Validate BASE table.
+  *
+  *    FT_VALIDATE_GDEF ::
+  *      Validate GDEF table.
+  *
+  *    FT_VALIDATE_GPOS ::
+  *      Validate GPOS table.
+  *
+  *    FT_VALIDATE_GSUB ::
+  *      Validate GSUB table.
+  *
+  *    FT_VALIDATE_JSTF ::
+  *      Validate JSTF table.
+  *
+  *    FT_VALIDATE_MATH ::
+  *      Validate MATH table.
+  *
+  *    FT_VALIDATE_OT ::
+  *      Validate all OpenType tables (BASE, GDEF, GPOS, GSUB, JSTF, MATH).
+  *
+  */
+#define FT_VALIDATE_BASE  0x0100
+#define FT_VALIDATE_GDEF  0x0200
+#define FT_VALIDATE_GPOS  0x0400
+#define FT_VALIDATE_GSUB  0x0800
+#define FT_VALIDATE_JSTF  0x1000
+#define FT_VALIDATE_MATH  0x2000
+
+#define FT_VALIDATE_OT  FT_VALIDATE_BASE | \
+                        FT_VALIDATE_GDEF | \
+                        FT_VALIDATE_GPOS | \
+                        FT_VALIDATE_GSUB | \
+                        FT_VALIDATE_JSTF | \
+                        FT_VALIDATE_MATH
+
+  /* */
+
+ /**********************************************************************
+  *
+  * @function:
+  *    FT_OpenType_Validate
+  *
+  * @description:
+  *    Validate various OpenType tables to assure that all offsets and
+  *    indices are valid.  The idea is that a higher-level library which
+  *    actually does the text layout can access those tables without
+  *    error checking (which can be quite time consuming).
+  *
+  * @input:
+  *    face ::
+  *       A handle to the input face.
+  *
+  *    validation_flags ::
+  *       A bit field which specifies the tables to be validated.  See
+  *       @FT_VALIDATE_OTXXX for possible values.
+  *
+  * @output:
+  *    BASE_table ::
+  *       A pointer to the BASE table.
+  *
+  *    GDEF_table ::
+  *       A pointer to the GDEF table.
+  *
+  *    GPOS_table ::
+  *       A pointer to the GPOS table.
+  *
+  *    GSUB_table ::
+  *       A pointer to the GSUB table.
+  *
+  *    JSTF_table ::
+  *       A pointer to the JSTF table.
+  *
+  * @return:
+  *   FreeType error code.  0~means success.
+  *
+  * @note:
+  *   This function only works with OpenType fonts, returning an error
+  *   otherwise.
+  *
+  *   After use, the application should deallocate the five tables with
+  *   @FT_OpenType_Free.  A NULL value indicates that the table either
+  *   doesn't exist in the font, or the application hasn't asked for
+  *   validation.
+  */
+  FT_EXPORT( FT_Error )
+  FT_OpenType_Validate( FT_Face    face,
+                        FT_UInt    validation_flags,
+                        FT_Bytes  *BASE_table,
+                        FT_Bytes  *GDEF_table,
+                        FT_Bytes  *GPOS_table,
+                        FT_Bytes  *GSUB_table,
+                        FT_Bytes  *JSTF_table );
+
+  /* */
+
+ /**********************************************************************
+  *
+  * @function:
+  *    FT_OpenType_Free
+  *
+  * @description:
+  *    Free the buffer allocated by OpenType validator.
+  *
+  * @input:
+  *    face ::
+  *       A handle to the input face.
+  *
+  *    table ::
+  *       The pointer to the buffer that is allocated by
+  *       @FT_OpenType_Validate.
+  *
+  * @note:
+  *   This function must be used to free the buffer allocated by
+  *   @FT_OpenType_Validate only.
+  */
+  FT_EXPORT( void )
+  FT_OpenType_Free( FT_Face   face,
+                    FT_Bytes  table );
+
+
+ /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTOTVAL_H__ */
+
+
+/* END */

data/vendor/local/include/freetype2/freetype/ftoutln.h

@@ -0,0 +1,537 @@
+/***************************************************************************/
+/*                                                                         */
+/*  ftoutln.h                                                              */
+/*                                                                         */
+/*    Support for the FT_Outline type used to store glyph shapes of        */
+/*    most scalable font formats (specification).                          */
+/*                                                                         */
+/*  Copyright 1996-2001, 2002, 2003, 2005, 2006, 2007, 2008, 2009, 2010 by */
+/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
+/*                                                                         */
+/*  This file is part of the FreeType project, and may only be used,       */
+/*  modified, and distributed under the terms of the FreeType project      */
+/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
+/*  this file you indicate that you have read the license and              */
+/*  understand and accept it fully.                                        */
+/*                                                                         */
+/***************************************************************************/
+
+
+#ifndef __FTOUTLN_H__
+#define __FTOUTLN_H__
+
+
+#include <ft2build.h>
+#include FT_FREETYPE_H
+
+#ifdef FREETYPE_H
+#error "freetype.h of FreeType 1 has been loaded!"
+#error "Please fix the directory search order for header files"
+#error "so that freetype.h of FreeType 2 is found first."
+#endif
+
+
+FT_BEGIN_HEADER
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Section>                                                             */
+  /*    outline_processing                                                 */
+  /*                                                                       */
+  /* <Title>                                                               */
+  /*    Outline Processing                                                 */
+  /*                                                                       */
+  /* <Abstract>                                                            */
+  /*    Functions to create, transform, and render vectorial glyph images. */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    This section contains routines used to create and destroy scalable */
+  /*    glyph images known as `outlines'.  These can also be measured,     */
+  /*    transformed, and converted into bitmaps and pixmaps.               */
+  /*                                                                       */
+  /* <Order>                                                               */
+  /*    FT_Outline                                                         */
+  /*    FT_OUTLINE_FLAGS                                                   */
+  /*    FT_Outline_New                                                     */
+  /*    FT_Outline_Done                                                    */
+  /*    FT_Outline_Copy                                                    */
+  /*    FT_Outline_Translate                                               */
+  /*    FT_Outline_Transform                                               */
+  /*    FT_Outline_Embolden                                                */
+  /*    FT_Outline_Reverse                                                 */
+  /*    FT_Outline_Check                                                   */
+  /*                                                                       */
+  /*    FT_Outline_Get_CBox                                                */
+  /*    FT_Outline_Get_BBox                                                */
+  /*                                                                       */
+  /*    FT_Outline_Get_Bitmap                                              */
+  /*    FT_Outline_Render                                                  */
+  /*                                                                       */
+  /*    FT_Outline_Decompose                                               */
+  /*    FT_Outline_Funcs                                                   */
+  /*    FT_Outline_MoveTo_Func                                             */
+  /*    FT_Outline_LineTo_Func                                             */
+  /*    FT_Outline_ConicTo_Func                                            */
+  /*    FT_Outline_CubicTo_Func                                            */
+  /*                                                                       */
+  /*************************************************************************/
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Outline_Decompose                                               */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Walk over an outline's structure to decompose it into individual   */
+  /*    segments and Bézier arcs.  This function also emits `move to'      */
+  /*    operations to indicate the start of new contours in the outline.   */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    outline        :: A pointer to the source target.                  */
+  /*                                                                       */
+  /*    func_interface :: A table of `emitters', i.e., function pointers   */
+  /*                      called during decomposition to indicate path     */
+  /*                      operations.                                      */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    user           :: A typeless pointer which is passed to each       */
+  /*                      emitter during the decomposition.  It can be     */
+  /*                      used to store the state during the               */
+  /*                      decomposition.                                   */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Outline_Decompose( FT_Outline*              outline,
+                        const FT_Outline_Funcs*  func_interface,
+                        void*                    user );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Outline_New                                                     */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Create a new outline of a given size.                              */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    library     :: A handle to the library object from where the       */
+  /*                   outline is allocated.  Note however that the new    */
+  /*                   outline will *not* necessarily be *freed*, when     */
+  /*                   destroying the library, by @FT_Done_FreeType.       */
+  /*                                                                       */
+  /*    numPoints   :: The maximal number of points within the outline.    */
+  /*                                                                       */
+  /*    numContours :: The maximal number of contours within the outline.  */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    anoutline   :: A handle to the new outline.                        */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The reason why this function takes a `library' parameter is simply */
+  /*    to use the library's memory allocator.                             */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Outline_New( FT_Library   library,
+                  FT_UInt      numPoints,
+                  FT_Int       numContours,
+                  FT_Outline  *anoutline );
+
+
+  FT_EXPORT( FT_Error )
+  FT_Outline_New_Internal( FT_Memory    memory,
+                           FT_UInt      numPoints,
+                           FT_Int       numContours,
+                           FT_Outline  *anoutline );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Outline_Done                                                    */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Destroy an outline created with @FT_Outline_New.                   */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    library :: A handle of the library object used to allocate the     */
+  /*               outline.                                                */
+  /*                                                                       */
+  /*    outline :: A pointer to the outline object to be discarded.        */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    If the outline's `owner' field is not set, only the outline        */
+  /*    descriptor will be released.                                       */
+  /*                                                                       */
+  /*    The reason why this function takes an `library' parameter is       */
+  /*    simply to use ft_mem_free().                                       */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Outline_Done( FT_Library   library,
+                   FT_Outline*  outline );
+
+
+  FT_EXPORT( FT_Error )
+  FT_Outline_Done_Internal( FT_Memory    memory,
+                            FT_Outline*  outline );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Outline_Check                                                   */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Check the contents of an outline descriptor.                       */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    outline :: A handle to a source outline.                           */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Outline_Check( FT_Outline*  outline );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Outline_Get_CBox                                                */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Return an outline's `control box'.  The control box encloses all   */
+  /*    the outline's points, including Bézier control points.  Though it  */
+  /*    coincides with the exact bounding box for most glyphs, it can be   */
+  /*    slightly larger in some situations (like when rotating an outline  */
+  /*    which contains Bézier outside arcs).                               */
+  /*                                                                       */
+  /*    Computing the control box is very fast, while getting the bounding */
+  /*    box can take much more time as it needs to walk over all segments  */
+  /*    and arcs in the outline.  To get the latter, you can use the       */
+  /*    `ftbbox' component which is dedicated to this single task.         */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    outline :: A pointer to the source outline descriptor.             */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    acbox   :: The outline's control box.                              */
+  /*                                                                       */
+  FT_EXPORT( void )
+  FT_Outline_Get_CBox( const FT_Outline*  outline,
+                       FT_BBox           *acbox );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Outline_Translate                                               */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Apply a simple translation to the points of an outline.            */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    outline :: A pointer to the target outline descriptor.             */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    xOffset :: The horizontal offset.                                  */
+  /*                                                                       */
+  /*    yOffset :: The vertical offset.                                    */
+  /*                                                                       */
+  FT_EXPORT( void )
+  FT_Outline_Translate( const FT_Outline*  outline,
+                        FT_Pos             xOffset,
+                        FT_Pos             yOffset );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Outline_Copy                                                    */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Copy an outline into another one.  Both objects must have the      */
+  /*    same sizes (number of points & number of contours) when this       */
+  /*    function is called.                                                */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    source :: A handle to the source outline.                          */
+  /*                                                                       */
+  /* <Output>                                                              */
+  /*    target :: A handle to the target outline.                          */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Outline_Copy( const FT_Outline*  source,
+                   FT_Outline        *target );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Outline_Transform                                               */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Apply a simple 2x2 matrix to all of an outline's points.  Useful   */
+  /*    for applying rotations, slanting, flipping, etc.                   */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    outline :: A pointer to the target outline descriptor.             */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    matrix  :: A pointer to the transformation matrix.                 */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    You can use @FT_Outline_Translate if you need to translate the     */
+  /*    outline's points.                                                  */
+  /*                                                                       */
+  FT_EXPORT( void )
+  FT_Outline_Transform( const FT_Outline*  outline,
+                        const FT_Matrix*   matrix );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Outline_Embolden                                                */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Embolden an outline.  The new outline will be at most 4~times      */
+  /*    `strength' pixels wider and higher.  You may think of the left and */
+  /*    bottom borders as unchanged.                                       */
+  /*                                                                       */
+  /*    Negative `strength' values to reduce the outline thickness are     */
+  /*    possible also.                                                     */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    outline  :: A handle to the target outline.                        */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    strength :: How strong the glyph is emboldened.  Expressed in      */
+  /*                26.6 pixel format.                                     */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    The used algorithm to increase or decrease the thickness of the    */
+  /*    glyph doesn't change the number of points; this means that certain */
+  /*    situations like acute angles or intersections are sometimes        */
+  /*    handled incorrectly.                                               */
+  /*                                                                       */
+  /*    If you need `better' metrics values you should call                */
+  /*    @FT_Outline_Get_CBox ot @FT_Outline_Get_BBox.                      */
+  /*                                                                       */
+  /*    Example call:                                                      */
+  /*                                                                       */
+  /*    {                                                                  */
+  /*      FT_Load_Glyph( face, index, FT_LOAD_DEFAULT );                   */
+  /*      if ( face->slot->format == FT_GLYPH_FORMAT_OUTLINE )             */
+  /*        FT_Outline_Embolden( &face->slot->outline, strength );         */
+  /*    }                                                                  */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Outline_Embolden( FT_Outline*  outline,
+                       FT_Pos       strength );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Outline_Reverse                                                 */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Reverse the drawing direction of an outline.  This is used to      */
+  /*    ensure consistent fill conventions for mirrored glyphs.            */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    outline :: A pointer to the target outline descriptor.             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    This function toggles the bit flag @FT_OUTLINE_REVERSE_FILL in     */
+  /*    the outline's `flags' field.                                       */
+  /*                                                                       */
+  /*    It shouldn't be used by a normal client application, unless it     */
+  /*    knows what it is doing.                                            */
+  /*                                                                       */
+  FT_EXPORT( void )
+  FT_Outline_Reverse( FT_Outline*  outline );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Outline_Get_Bitmap                                              */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Render an outline within a bitmap.  The outline's image is simply  */
+  /*    OR-ed to the target bitmap.                                        */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    library :: A handle to a FreeType library object.                  */
+  /*                                                                       */
+  /*    outline :: A pointer to the source outline descriptor.             */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    abitmap :: A pointer to the target bitmap descriptor.              */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    This function does NOT CREATE the bitmap, it only renders an       */
+  /*    outline image within the one you pass to it!  Consequently, the    */
+  /*    various fields in `abitmap' should be set accordingly.             */
+  /*                                                                       */
+  /*    It will use the raster corresponding to the default glyph format.  */
+  /*                                                                       */
+  /*    The value of the `num_grays' field in `abitmap' is ignored.  If    */
+  /*    you select the gray-level rasterizer, and you want less than 256   */
+  /*    gray levels, you have to use @FT_Outline_Render directly.          */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Outline_Get_Bitmap( FT_Library        library,
+                         FT_Outline*       outline,
+                         const FT_Bitmap  *abitmap );
+
+
+  /*************************************************************************/
+  /*                                                                       */
+  /* <Function>                                                            */
+  /*    FT_Outline_Render                                                  */
+  /*                                                                       */
+  /* <Description>                                                         */
+  /*    Render an outline within a bitmap using the current scan-convert.  */
+  /*    This function uses an @FT_Raster_Params structure as an argument,  */
+  /*    allowing advanced features like direct composition, translucency,  */
+  /*    etc.                                                               */
+  /*                                                                       */
+  /* <Input>                                                               */
+  /*    library :: A handle to a FreeType library object.                  */
+  /*                                                                       */
+  /*    outline :: A pointer to the source outline descriptor.             */
+  /*                                                                       */
+  /* <InOut>                                                               */
+  /*    params  :: A pointer to an @FT_Raster_Params structure used to     */
+  /*               describe the rendering operation.                       */
+  /*                                                                       */
+  /* <Return>                                                              */
+  /*    FreeType error code.  0~means success.                             */
+  /*                                                                       */
+  /* <Note>                                                                */
+  /*    You should know what you are doing and how @FT_Raster_Params works */
+  /*    to use this function.                                              */
+  /*                                                                       */
+  /*    The field `params.source' will be set to `outline' before the scan */
+  /*    converter is called, which means that the value you give to it is  */
+  /*    actually ignored.                                                  */
+  /*                                                                       */
+  /*    The gray-level rasterizer always uses 256 gray levels.  If you     */
+  /*    want less gray levels, you have to provide your own span callback. */
+  /*    See the @FT_RASTER_FLAG_DIRECT value of the `flags' field in the   */
+  /*    @FT_Raster_Params structure for more details.                      */
+  /*                                                                       */
+  FT_EXPORT( FT_Error )
+  FT_Outline_Render( FT_Library         library,
+                     FT_Outline*        outline,
+                     FT_Raster_Params*  params );
+
+
+ /**************************************************************************
+  *
+  * @enum:
+  *   FT_Orientation
+  *
+  * @description:
+  *   A list of values used to describe an outline's contour orientation.
+  *
+  *   The TrueType and PostScript specifications use different conventions
+  *   to determine whether outline contours should be filled or unfilled.
+  *
+  * @values:
+  *   FT_ORIENTATION_TRUETYPE ::
+  *     According to the TrueType specification, clockwise contours must
+  *     be filled, and counter-clockwise ones must be unfilled.
+  *
+  *   FT_ORIENTATION_POSTSCRIPT ::
+  *     According to the PostScript specification, counter-clockwise contours
+  *     must be filled, and clockwise ones must be unfilled.
+  *
+  *   FT_ORIENTATION_FILL_RIGHT ::
+  *     This is identical to @FT_ORIENTATION_TRUETYPE, but is used to
+  *     remember that in TrueType, everything that is to the right of
+  *     the drawing direction of a contour must be filled.
+  *
+  *   FT_ORIENTATION_FILL_LEFT ::
+  *     This is identical to @FT_ORIENTATION_POSTSCRIPT, but is used to
+  *     remember that in PostScript, everything that is to the left of
+  *     the drawing direction of a contour must be filled.
+  *
+  *   FT_ORIENTATION_NONE ::
+  *     The orientation cannot be determined.  That is, different parts of
+  *     the glyph have different orientation.
+  *
+  */
+  typedef enum  FT_Orientation_
+  {
+    FT_ORIENTATION_TRUETYPE   = 0,
+    FT_ORIENTATION_POSTSCRIPT = 1,
+    FT_ORIENTATION_FILL_RIGHT = FT_ORIENTATION_TRUETYPE,
+    FT_ORIENTATION_FILL_LEFT  = FT_ORIENTATION_POSTSCRIPT,
+    FT_ORIENTATION_NONE
+
+  } FT_Orientation;
+
+
+ /**************************************************************************
+  *
+  * @function:
+  *   FT_Outline_Get_Orientation
+  *
+  * @description:
+  *   This function analyzes a glyph outline and tries to compute its
+  *   fill orientation (see @FT_Orientation).  This is done by computing
+  *   the direction of each global horizontal and/or vertical extrema
+  *   within the outline.
+  *
+  *   Note that this will return @FT_ORIENTATION_TRUETYPE for empty
+  *   outlines.
+  *
+  * @input:
+  *   outline ::
+  *     A handle to the source outline.
+  *
+  * @return:
+  *   The orientation.
+  *
+  */
+  FT_EXPORT( FT_Orientation )
+  FT_Outline_Get_Orientation( FT_Outline*  outline );
+
+
+  /* */
+
+
+FT_END_HEADER
+
+#endif /* __FTOUTLN_H__ */
+
+
+/* END */
+
+
+/* Local Variables: */
+/* coding: utf-8    */
+/* End:             */