openstudio-standards 0.8.5 → 0.8.7

data/lib/openstudio-standards/btap/common_resources/materials_glazing.csv

@@ -1,35 +0,0 @@
-materials_glazing_id,source,type,material_type,id,description,unit,material_mult,labour_mult,op_mult,U_W_per_m2-K,fenestration_type,fenestration_assembly_context,fenestration_number_of_panes,fenestration_frame_type,fenestration_divider_type,fenestration_tint,fenestration_gas_fill,fenestration_low_emissivity_coating,solar_heat_gain_coefficient,visible_transmittance,comments
-1,rs-means,Assembly,glazing,240001,"Windows, aluminum, awning, standard glass, 4'-5"" x 5'-3""",ft2,0.043,0.043,0.043,2.4,FixedWindow,Manufactured,Double Pane,Metal Framing,"Between Panes < 7/16""",Clear,Argon,True,0.55,0.61,Cost conv. workaround: Assembly cost is $652 and area is 23.18ft2 - Ea. To S.F. is =652/23.18 =28.12$/ft2 - Derating factor = 1/area = 0.0355 - Expect cost ~$28/ft2
-2,rs-means,Assembly,glazing,240002,"6' x 7' aluminum patio, tempered glass, zero frame thermal break",ft2,1,1,1,2.4,GlazedDoor,Manufactured,Double Pane,Metal Framing,"Between Panes < 7/16""",Clear,Air,False,0.65,0.7,"base was without thermal break, no cost change"
-3,rs-means,Assembly,glazing,240003,"entrance, door 5'x7', opening 12'x7'-6', electric operator, zero frame thermal break",ft2,1,1,1,2.4,GlazedDoor,Manufactured,Double Pane,Metal Framing,"Between Panes < 7/16""",Clear,Air,False,0.65,0.7,"base was without thermal break, no cost change"
-4,rs-means,Assembly,glazing,240004,"fixed mall front panels, aluminum finish 48' x 9' opening, zero frame thermal break",ft2,0.0023148148148148147,0.0023148148148148147,0.0023148148148148147,2.4,FixedWindow,Manufactured,Double Pane,Metal Framing,"Between Panes < 7/16""",Clear,Argon,True,0.55,0.61,
-5,rs-means,Assembly,glazing,240005,"aluminum window: stock 5'x3' including framing and insulated glazing, zero frame thermal break",ft2,1,1,1,2.4,OperableWindow,Manufactured,Double Pane,Metal Framing,"Between Panes >= 7/16""",Clear,Argon,True,0.55,0.61,
-6,rs-means,Assembly,glazing,240001,"Windows, aluminum, awning, standard glass, 4'-5"" x 5'-3""",ft2,0.043,0.043,0.043,2.4,FixedWindow,Manufactured,Double Pane,Non-Metal Framing,"Between Panes < 7/16""",Clear,Argon,True,0.55,0.61,Cost conv. workaround: Assembly cost is $652 and area is 23.18ft2 - Ea. To S.F. is =652/23.18 =28.12$/ft2 - Derating factor = 1/area = 0.0355 - Expect cost ~$28/ft2
-7,rs-means,Assembly,glazing,240006,"6' x 4' picture with insulating glass, 2 lites, low E, finished extensions and jambs, zero frame thermal break",ft2,1,1,1,2.4,OperableWindow,Manufactured,Double Pane,Non-Metal Framing,"Between Panes >= 7/16""",Clear,Argon,True,0.55,0.61,Thermal break always included in cost
-8,rs-means,Assembly,glazing,240001,"Windows, aluminum, awning, standard glass, 4'-5"" x 5'-3""",ft2,0.043,0.043,0.043,2.4,FixedWindow,Manufactured,Double Pane,Metal Framing,"Between Panes < 7/16""",Clear,Argon,True,0.55,0.61,Cost conv. workaround: Assembly cost is $652 and area is 23.18ft2 - Ea. To S.F. is =652/23.18 =28.12$/ft2 - Derating factor = 1/area = 0.0355 - Expect cost ~$28/ft2
-9,rs-means,Assembly,glazing,240007,"Windows, aluminum, awning, insulated glass, 4'-5"" x 5'-3""",ft2,0.043,0.043,0.043,2.2,FixedWindow,Manufactured,Double Pane,Metal Framing with Thermal Break,"Between Panes < 7/16""",Clear,Argon,True,0.55,0.61,Cost conv. workaround: Assembly cost is $782 and area is 23.18ft2 - Ea. To S.F. is =782/23.18 =33.7$/ft2 - Derating factor = 1/area = 0.0355 - Expect cost ~$33/ft2
-10,rs-means,Assembly,glazing,240002,"6' x 7' aluminum patio, tempered glass",ft2,1,1,1,2.2,GlazedDoor,Manufactured,Double Pane,Metal Framing,"Between Panes < 7/16""",Clear,Air,False,0.65,0.7,
-11,rs-means,Assembly,glazing,240003,"entrance, door 5'x7', opening 12'x7'-6', electric operator",ft2,1,1,1,2.2,GlazedDoor,Manufactured,Double Pane,Metal Framing,"Between Panes < 7/16""",Clear,Air,False,0.65,0.7,
-12,rs-means,Assembly,glazing,240004,"fixed mall front panels, aluminum finish 48' x 9' opening",ft2,0.0023148148148148147,0.0023148148148148147,0.0023148148148148147,2.2,FixedWindow,Manufactured,Double Pane,Metal Framing with Thermal Break,"Between Panes < 7/16""",Clear,Argon,True,0.55,0.61,
-13,rs-means,Assembly,glazing,240005,aluminum window: stock 5'x3' including framing and insulated glazing,ft2,1,1,1,2.2,OperableWindow,Manufactured,Double Pane,Metal Framing with Thermal Break,"Between Panes >= 7/16""",Clear,Argon,True,0.55,0.61,
-14,rs-means,Assembly,glazing,240007,"Windows, aluminum, awning, insulated glass, 4'-5"" x 5'-3""",ft2,0.043,0.043,0.043,2.2,FixedWindow,Manufactured,Double Pane,Non-Metal Framing,"Between Panes < 7/16""",Clear,Argon,True,0.55,0.61,Cost conv. workaround: Assembly cost is $782 and area is 23.18ft2 - Ea. To S.F. is =782/23.18 =33.7$/ft2 - Derating factor = 1/area = 0.0355 - Expect cost ~$33/ft2
-15,rs-means,Assembly,glazing,240006,"6' x 4' picture with insulating glass, 2 lites, low E, finished extensions and jambs",ft2,1,1,1,2.2,OperableWindow,Manufactured,Double Pane,Non-Metal Framing,"Between Panes >= 7/16""",Clear,Argon,True,0.55,0.61,
-16,rs-means,Assembly,glazing,240007,"Windows, aluminum, awning, insulated glass, 4'-5"" x 5'-3""",ft2,0.043,0.043,0.043,2.2,FixedWindow,Manufactured,Double Pane,Metal Framing,"Between Panes < 7/16""",Clear,Argon,True,0.55,0.61,Cost conv. workaround: Assembly cost is $782 and area is 23.18ft2 - Ea. To S.F. is =782/23.18 =33.7$/ft2 - Derating factor = 1/area = 0.0355 - Expect cost ~$33/ft2
-17,rs-means,Assembly,glazing,240008,"Windows, aluminum, double hung, insul. glass, 3'-0"" x 4'-0""",ft2,0.0833,0.0833,0.0833,1.6,FixedWindow,Manufactured,Triple Pane,Metal Framing with Thermal Break,"Between Panes < 7/16""",Clear,Argon,True,0.4,0.4,Cost conv. workaround: Assembly cost is $807 and area is 12ft2 - Ea. To S.F. is =807/12 =67.25$/ft2 - Derating factor = 1/area = 0.0833 - Expect cost ~$67.25/ft2
-18,rs-means,Assembly,glazing,240002,"triple glazed U= 1.6 W/m2-K, 6' x 7' aluminum patio, tempered glass",ft2,1,1,1,1.6,GlazedDoor,Manufactured,Triple Pane,Metal Framing,"Between Panes < 7/16""",Clear,Air,False,0.45,0.5,
-19,rs-means,Assembly,glazing,240003,"triple glazed U= 1.6 W/m2-K, entrance, door 5'x7', opening 12'x7'-6', electric operator",ft2,1,1,1,1.6,GlazedDoor,Manufactured,Triple Pane,Metal Framing,"Between Panes < 7/16""",Clear,Air,False,0.45,0.5,
-20,rs-means,Assembly,glazing,240004,"triple glazed U= 1.6 W/m2-K, fixed mall front panels, aluminum finish 48' x 9' opening",ft2,0.0023148148148148147,0.0023148148148148147,0.0023148148148148147,1.6,FixedWindow,Manufactured,Triple Pane,Metal Framing with Thermal Break,"Between Panes < 7/16""",Clear,Argon,True,0.4,0.4,
-21,rs-means,Assembly,glazing,240005,"triple glazed U= 1.6 W/m2-K, aluminum window: stock 5'x3' including framing and insulated glazing",ft2,1,1,1,1.6,OperableWindow,Manufactured,Triple Pane,Metal Framing with Thermal Break,"Between Panes >= 7/16""",Clear,Argon,True,0.4,0.4,
-22,rs-means,Assembly,glazing,240008,"Windows, aluminum, double hung, insul. glass, 3'-0"" x 4'-0""",ft2,0.0833,0.0833,0.0833,1.6,FixedWindow,Manufactured,Triple Pane,Non-Metal Framing,"Between Panes < 7/16""",Clear,Argon,True,0.4,0.4,Cost conv. workaround: Assembly cost is $807 and area is 12ft2 - Ea. To S.F. is =807/12 =67.25$/ft2 - Derating factor = 1/area = 0.0833 - Expect cost ~$67.25/ft2
-23,rs-means,Assembly,glazing,240006,"triple glazed U= 1.6 W/m2-K, 6' x 4' picture with insulating glass, 2 lites, low E, finished extensions and jambs",ft2,1,1,1,1.6,OperableWindow,Manufactured,Triple Pane,Non-Metal Framing,"Between Panes >= 7/16""",Clear,Argon,True,0.4,0.4,
-24,rs-means,Assembly,glazing,240008,"Windows, aluminum, double hung, insul. glass, 3'-0"" x 4'-0""",ft2,0.0833,0.0833,0.0833,1.6,FixedWindow,Manufactured,Triple Pane,Metal Framing,"Between Panes < 7/16""",Clear,Argon,True,0.4,0.4,
-25,rs-means,Unit,skylights,100009,"Skylights, non venting, insulated, plexiglass dome with curb mount, 46"" x 46""",ft2,0.068,0.068,0.068,2.4,PlasticSkylightwithCurb,Manufactured,Double Pane,Metal-Framing,"Between Panes < 7/16""",Clear,Argon,True,0.4,0.4,Cost conv. workaround: Assembly cost is $841 and area is 14.7ft2 - Ea. To S.F. is =841/14.7 =57.23$/ft2 - Derating factor = 1/area = 0.068 - Expect cost ~$57.23/ft2
-26,rs-means,Unit,skylights,100009,"Skylights, non venting, insulated, plexiglass dome with curb mount, 46"" x 46""",ft2,0.068,0.068,0.068,2.4,GlassSkylightwithCurb,Manufactured,Double Pane,Metal-Framing,"Between Panes < 7/16""",Clear,Argon,True,0.5,0.5,Cost conv. workaround: Assembly cost is $841 and area is 14.7ft2 - Ea. To S.F. is =841/14.7 =57.23$/ft2 - Derating factor = 1/area = 0.068 - Expect cost ~$57.23/ft2
-27,rs-means,Unit,skylights,100010,"Skylights, non venting, insulated, plexiglass dome with curb mount, 46"" x 46""",ft2,0.068,0.068,0.068,1.6,PlasticSkylightwithCurb,Manufactured,Triple Pane,Metal-Framing,"Between Panes < 7/16""",Clear,Argon,True,0.2,0.2,Cost conv. workaround: Assembly cost is $861 and area is 14.7ft2 - Ea. To S.F. is =861/14.7 =58.6$/ft2 - Derating factor = 1/area = 0.068 - Expect cost ~$58.6/ft2
-28,rs-means,Unit,skylights,100010,"Skylights, non venting, insulated, plexiglass dome with curb mount, 46"" x 46""",ft2,0.068,0.068,0.068,1.6,GlassSkylightwithCurb,Manufactured,Triple Pane,Metal-Framing,"Between Panes < 7/16""",Clear,Argon,True,0.28,0.28,Cost conv. workaround: Assembly cost is $861 and area is 14.7ft2 - Ea. To S.F. is =861/14.7 =58.6$/ft2 - Derating factor = 1/area = 0.068 - Expect cost ~$58.6/ft2
-29,rs-means,Unit,Solarfilms,100011,bronze film (glass not included) 20% VLT,ft2,1,1,0,,FixedWindow,Manufactured,Double Pane,Metal-Framing,"Between Panes < 7/16""",Bronze,Air,True,0.16949152542372883,0.2,
-30,rs-means,Unit,Solarfilms,100012,bronze film (glass not included) 50% VLT,ft2,1,1,0,,FixedWindow,Manufactured,Double Pane,Metal-Framing,"Between Panes < 7/16""",Bronze,Air,True,0.42372881355932207,0.5,
-31,rs-means,Unit,Solarfilms,100013,Silver film (glass not included) 15% VLT,ft2,1,1,0,,FixedWindow,Manufactured,Double Pane,Metal-Framing,"Between Panes < 7/16""",Silver,Air,True,0.12820512820512822,0.15,
-32,rs-means,Unit,Solarfilms,100014,Silver film (glass not included) 35% VLT,ft2,1,1,0,,FixedWindow,Manufactured,Double Pane,Metal-Framing,"Between Panes < 7/16""",Silver,Air,True,0.29914529914529914,0.35,
-33,rs-means,Unit,Solarfilms,100015,Silver film (glass not included) 68% VLT,ft2,1,1,0,,FixedWindow,Manufactured,Double Pane,Metal-Framing,"Between Panes < 7/16""",Silver,Air,True,0.5811965811965812,0.68,
-34,rs-means,Unit,Solarfilms,100016,Neutral film (glass not included) 20% VLT,ft2,1,1,0,,FixedWindow,Manufactured,Double Pane,Metal-Framing,"Between Panes < 7/16""",Clear,Air,True,0.14814814814814814,0.2,

data/lib/openstudio-standards/btap/common_resources/materials_opaque.csv

@@ -1,164 +0,0 @@
-materials_opaque_id,description,source,type,material_type,id,unit,quantity,material_mult,labour_mult,op_mult,eqpt
-1,gypsum wallboard 0.5 in thick,rs-means,Unit,opaque,110017,ft2,1,1,1,0.381,1
-2,"standard wood studs with single bottom plate and double top plate, 16"" O.C., pneumatic nailer",rs-means,Assembly,opaque,240018,LF,0.1,1,1,0,1
-3,polyethylene 4 ml vapour barrier,rs-means,Unit,opaque,090019,SQ,0.01,1,1,0.543,1
-4,"foil face fibreglass batts, 5"" thick, 15"" wide, RSI 3.36",rs-means,Unit,opaque,090020,ft2,1,0.84,1,0.229,1
-5,"plywood sheathing, CDX, 0.5 in, pneumatic nailer",rs-means,Unit,opaque,080021,Ft2,1,1,1,0.33,1
-6,"weather barrier, spunbonded polyethylene",rs-means,Unit,opaque,090022,ft2,1,1,1,0.29,1
-7,"wood siding T&G ""B"" grade",rs-means,Unit,opaque,090023,ft2,1,1,1,0.18,1
-8,"joint sealants. tapes, foam, adhesive ",rs-means,Assembly,opaque,240018,CLF,0.001,1,1,0,1
-9,"waterproof sealer, 1 coat, sprayed",rs-means,Unit,opaque,110024,ft2,1,1,1,0.35,1
-10,"stains, paints, 2 coats sprayed",rs-means,Unit,opaque,110025,ft2,1,1,1,0.36,1
-11,"galvanized LB studs, 16 ga x 3-5/8\"" W studs 16\"" O.C. x 10' H, incl galvanized top & bottom track, excl openings, headers, beams, bracing & bridging",rs-means,Unit,opaque,070026,LF,0.1,1,1,0,1
-12,Polymer  EIFS with 2 in EPS and finish,rs-means,Unit,opaque,090027,ft2,1,1,1,0.4,1
-13,"standard wood studs with single bottom plate and double top plate, 16"" O.C.",rs-means,Assembly,opaque,240018,ft2,1,1,1,0,1
-14,"vinyl siding, clapboard profile, woodgrain texture, 0.048 "" thick, 8"" width",rs-means,Unit,opaque,090028,ft2,1,1,1,0.377,1
-15,"aluminum flashing, mill finish. 0.013 "" thick",rs-means,Assembly,opaque,240029,ft2,1,1,1,0,1
-16,"metal decking strips, galvanized, 18 gauge",rs-means,Unit,opaque,070030,LF,0.0766,1,1,0,1
-17,"10 yr finish metal siding, 24 gauge, 0.0239 "" thick with fasteners",rs-means,Unit,opaque,090031,ft2,1,1,1,0.315,1
-18,"aluminum closure strips, mill finish. 0.032 "" thick",rs-means,Unit,opaque,090032,LF,0.111,1,1,0,1
-19,"joint sealants. tapes, foam, adhesive ",rs-means,Assembly,opaque,240033,CLF,0.00397,1,1,0,1
-20,"Brick walls, face brick, red, running bond, 6.75/SF, 4\"" thick, includes mortar",rs-means,Unit,opaque,060034,ft2,1,1,1,0,1
-21,"Lintel angle, structural, unpainted, under 500 lb., shop fabricated",rs-means,Unit,opaque,070035,lb,1,1,1,0,1
-22,"Sheet metal flashing, 0.019"" thick",rs-means,Assembly,opaque,240018,ft2,0.1,1,1,0,1
-23,"standard wood studs with single bottom plate and double top plate, 16"" O.C.",rs-means,Assembly,opaque,240036,ft2,1,1,1,0,1
-24,"Block, tooled joints both sides, includes morter, excludes, scaffolding, reinforcing, grout",rs-means,Unit,opaque,060037,ft2,1,1,1,0,1
-25,"masonry reinforcing bars, galvanized ladder type 9 gauge with ties placed horizontally",rs-means,Unit,opaque,060038,CLF,0.008,1,1,0,1
-26,masonry #5 and #6 reinforcing bars placed vertically,rs-means,Unit,opaque,060039,lb,0.43,1,1,0,1
-27,"Control joint, PVC",rs-means,Unit,opaque,060040,LF,0.05,1,1,0,1
-28,"Grout, 8"" thick including pumping",rs-means,Unit,opaque,060041,ft2,0.188,1,1,0,1
-29,"XPS, 25 PSI, 3"" RSI 2.64 modified to 3.75"" RSI 3.33",rs-means,Unit,opaque,090042,ft2,1,1.25,1,0.22,1
-30,"fibreglass batts, 3.5 in thick RSI2.29",rs-means,Unit,opaque,090043,ft2,1,1,1,0.27,1
-31,"80 ton erection crane, truck mounted",rs-means,Unit,opaque,010044,Day,0.000116,1,1,0,1
-32,"C.I.P. forms, wood to 10 inches high, including erecting, bracing, stripping cleaning",rs-means,Unit,opaque,020045,LF,0.24,1,1,0,1
-33,"Form aligner for C.I.P. footing forms, material only",rs-means,Unit,opaque,020046,Ea,0.056,1,1,0,1
-34,"Slab lifting inserts, galvanized, 1"" diameter by 10"" high material only",rs-means,Unit,opaque,020047,C,8e-05,1,1,0,1
-35,"Welded wire fabric sheets 6""x6"" 42 lbs per Ft2, excludes accessories",rs-means,Unit,opaque,020048,ft2,0.02,1,1,0,1
-36,"Structural concrete, 3000 PSI, 6"" thick includes, levelling, excludes additives and treatment",rs-means,Unit,opaque,020049,yd3,0.0125,1,1,0,1
-37,"Concrete surface treatment, sprayed membrane compound",rs-means,Unit,opaque,020050,CSF,0.01,1,1,0,1
-38,"Tilt-up panel release agent, 1 gal/700ft2",rs-means,Unit,opaque,020051,Gal,0.000285,1,1,0,1
-39,"Angle framing structural steel, field fabricated",rs-means,Unit,opaque,070052,lb,0.19,1,1,0,1
-40,"XPS, 25 PSI, 2"" RSI 1.76",rs-means,Unit,opaque,090053,ft2,1,1,1,0.253,1
-41,"Precast panel, 4 ft x 8 ft smooth white face finish, 4 inch thick, includes erection on prepared openings",rs-means,Unit,opaque,020054,ft2,1,1,1,0,1
-42,"XPS, 25 PSI, 2 sheets of 2"" RSI 1.76 each total 4"" RSI 3.52",rs-means,Unit,opaque,090053,ft2,1,2,2,0.253,1
-43,"fibreglass batts, 6 in thick RSI 3.35",rs-means,Unit,opaque,090055,ft2,1,1,1,0.234,1
-44,"C.I.P. forms, plywood to 8ft  high, including erecting, bracing, stripping cleaning",rs-means,Unit,opaque,020056,SFCA,2,1,1,0,1
-45,"Reinforcing Steel, #3 to #7, includes labour for accessories, but excludes accessories",rs-means,Unit,opaque,020057,ton,0.000376,1,1,0,1
-46,"Structural concrete, 3000 PSI, 6"" thick includes pumping, levelling, consolidation, excludes additives and treatment",rs-means,Unit,opaque,020049,yd3,0.018,1,1,0,1
-47,"Concrete finishing, surface treatment, patching, tie break-off",rs-means,Unit,opaque,020058,ft2,2,1,1,0,1
-48,"Steel siding, factory panel, galvanized, 22 gauge, colored 1 side and baked enamal exterior finish, includes 2 in. polystyrene modified to 3"" PS",rs-means,Unit,opaque,090059,ft2,1,1.5,1,0,1
-49,"fibreglass batts, 3.5 in thick RSI2.29 modified to 5 inch batt RSI 3.05",rs-means,Unit,opaque,090043,ft2,1,1.33,1,0.272,1
-50,"Spandrel glass 3/8"" plate",rs-means,Unit,opaque,100060,ft2,1,1,1,0,1
-51,Aluminum panel with 2 inches fibreglass,rs-means,Unit,opaque,100061,ft2,1,1,1,0,1
-52,"22 gauge sheet metal galvanized with 2"" fibreglass, polyvinyl exterior finish",rs-means,Unit,opaque,090059,ft2,1,1,1,0,1
-53,"foil face fibreglass batts, 6 "" thick, 15"" wide, RSI 3.52",rs-means,Unit,opaque,090020,ft2,1,1,1,0.229,1
-54,"0.5"" Isoboard, 4 x 8 sheet, foil faced (RSI 0.48)",rs-means,Unit,opaque,090062,ft2,1,1,1,0.405,1
-55,"XPS, 25 PSI, 2"" RSI 1.76 modified to 2 x 2.5"" sheets: total 5"" RSI 4.4",rs-means,Unit,opaque,090053,ft2,1,2.5,2,0.253,1
-56,"Isoboard, 1"" thick, RSI .98",rs-means,Unit,opaque,090063,ft2,1,1,1,0.337,1
-57,"XPS, 25 PSI, 2"" RSI 1.76",rs-means,Unit,opaque,090053,ft2,1,1,1,0.253,1
-58,"XPS, 25 PSI, 2"" RSI 1.76 modified to 2 x 2.25"" sheets RSI 4",rs-means,Unit,opaque,090053,ft2,1,2.25,2,0.253,1
-59,"XPS, 25 PSI, 2"" RSI 1.76 modified to 3 x 2"" sheets RSI 5.28",rs-means,Unit,opaque,090053,ft2,1,3,3,0.253,1
-60,"fibreglass batts, 6 in thick RSI3.35",rs-means,Unit,opaque,090055,ft2,1,1,1,0.234,1
-61,"Polyurethane foam lining of spandrel panel, 1 "" RSI 1.14",rs-means,Unit,opaque,090064,ft2,1,1,1,0,1
-62,"Polyurethane foam lining of spandrel panel, 1 "" RSI 1.14",rs-means,Unit,opaque,090064,ft2,1,1,1,0.281,1
-63,"Isoboard, 1.5"" thick, RSI 1.38",rs-means,Unit,opaque,090065,ft2,1,1,1,0.34,1
-64,"Polyurethane Foam 4.5"" thick, RSI 5.15 modifed to 5"" foaming RSI 5.67",rs-means,Unit,opaque,090066,ft2,1,1.1,1.25,0.203,1.25
-65,"XPS, 25 PSI, 2"" RSI 1.76 modified to 2 x 2.5"" sheets: total 5"" RSI 4.4",rs-means,Unit,opaque,090053,ft2,1,2.5,2,0.253,1
-66,"Polyurethane foam lining of spandrel panel, 2 "" RSI 2.2",rs-means,Unit,opaque,090067,ft2,1,1,1,0.2,1
-67,"Isoboard sheathing, 2"" thick RSI 1.93",rs-means,Unit,opaque,090068,Ft2,1,1,1,0.31,1
-68,"Polyurethane Foam 4.5"" thick, RSI 5.15 modified to 5.5"" foaming RSI 6.18",rs-means,Unit,opaque,090066,ft2,1,1.2,1.25,0.203,1.25
-69,"fibreglass batts, 6 in thick RSI 3.34",rs-means,Unit,opaque,090055,ft2,1,1,1,0.234,1
-70,"Isoboard sheathing, 3"" thick RSI 2.88   2 sheets 6"" RSI 5.76",rs-means,Unit,opaque,090069,ft2,1,2,2,0.207,1
-71,"XPS, 25 PSI, 2"" RSI 1.76 modified to 2 x 2.5"" sheets: total 5"" RSI 4.4",rs-means,Unit,opaque,090053,ft2,1,2.5,2,0.253,1
-72,"Polyurethane foam lining of spandrel panel, 3 "" RSI 3.42",rs-means,Unit,opaque,090070,ft2,1,1,1,0.197,1
-73,"Isoboard 3"" RSI 2.9, modified to 3.75"" sheet RSI 3.63",rs-means,Unit,opaque,090069,ft2,1,1.25,1,0.207,1
-74,"gypsumboard, 0.5 in. fire rated, no finish or taping",rs-means,Unit,opaque,110071,ft2,1,1,1,0.378,1
-75,"Isoboard 3"" RSI 2.9, modified to 4"" sheet RSI 3.85",rs-means,Unit,opaque,090069,ft2,1,1.33,1,0.207,1
-76,"Isoboard 4"" RSI 3.87 modified to 2x2.5"" sheets RSI 4.84",rs-means,Unit,opaque,090072,ft2,1,1.25,2,0.195,1
-77,"Isoboard 4"" RSI 3.87 modfied to 2 x 2.75"" sheets RSI 5.15",rs-means,Unit,opaque,090072,ft2,1,1.33,2,0.195,1
-78,"Polyurethane foam, closed cell, 4"", RSI 4.10 modified to 6""foaming RSI 6.15",rs-means,Unit,opaque,090073,ft2,1,1.5,1.25,0.197,1.25
-79,"Fibreglass Foil Faced 3 "" RSI 2.29",rs-means,Unit,opaque,090043,ft2,1,1,1,0.27,1
-80,"XPS, 25 PSI, 3"" RSI 2.64",rs-means,Unit,opaque,090042,ft2,1,1,1,0.221,1
-81,"Fibreglass Foil Faced High Density  3 "" RSI 2.64",rs-means,Unit,opaque,090074,ft2,1,1,1,0.27,1
-82,"XPS, 25 PSI, 2"" RSI 1.76 modified to 2 sheets 4"" RSI 3.52",rs-means,Unit,opaque,090053,ft2,1,2,2,0.253,1
-83,"Fibreglass Foil Faced 6 "" RSI 3.7",rs-means,Unit,opaque,090075,ft2,1,1,1,0.23,1
-84,"XPS, 25 PSI, 2"" RSI 1.76 modified to 2 sheets 4"" RSI 3.52",rs-means,Unit,opaque,090053,ft2,1,2,2,0.253,1
-85,"XPS, 25 PSI, 3"" RSI 2.64 modified to 1x 3"" sheet and 1x 2.25"" sheet RSI 4.63",rs-means,Unit,opaque,090042,ft2,1,1.75,2,0.221,1
-86,"Polyurethance foam, 6"" RSI 5.28",rs-means,Unit,opaque,090076,ft2,1,1,1,0.2,1
-87,"asphalt flood coat, gravel base coated glass-fibre sheet and 3 plies glass fibre felt (type IV) mopped on nailable deck",rs-means,Unit,opaque,090077,SQ.,0.01,1,1,0.378,1
-88,"plywood underlayment 0.5"" thick",rs-means,Unit,opaque,080078,ft2,1,1,1,0.225,1
-89,"roof deck extruded polystyrene, 4"" (RSI 3.52), 25 PSI modifed to 1x4"" + 1x1.25"" sheets RSI 4.4",rs-means,Unit,opaque,090079,ft2,1,1.25,2,0.149,1
-90,"Spruce Wood decking, 2 "" thick",rs-means,Unit,opaque,080080,ft2,1,1,1,0.383,1
-91,"roof deck extruded polystyrene, 4"" (RSI 3.52), 25 PSI",rs-means,Unit,opaque,090079,ft2,1,1,1,0.149,1
-92,"Fibreglassboard, 1-5/16 inches thick RSI 0.92",rs-means,Unit,opaque,090081,ft2,1,1,1,0.191,1
-93,"Steel decking, open type galvanized, 1.5"" rib depth, 18 gauge",rs-means,Unit,opaque,070082,ft2,1,1,1,0.179,1
-94,"60 ml Single ply EPDM membrane fully adhered to underlayment, 0.4 lb/ft2 no ballast or aggregate topping",rs-means,Unit,opaque,090083,SQ.,0.01,1,1,0.29,1
-95,"Zinc Steel roofing, 28 gauge, .020"" thick, 115 lb/ft2",rs-means,Unit,opaque,090084,SQ.,0.01,1,1,0.208,1
-96,"Asphalt felt, #15",rs-means,Unit,opaque,090085,ft2,1,1,1,0.538,1
-97,Plywood underlayment 0.75' thick,rs-means,Unit,opaque,080086,ft2,1,1,1,0.215,1
-98,"Premium shingles, Class A, 300-385 lbs/ft2, pneumatic nailer",rs-means,Unit,opaque,090087,SQ.,0.01,1,1,0.3,1
-99,"9.5"" thick fibreglass, kraft coated ceiling insulation, 15"" wide blanket (RSI 5.28)",rs-means,Unit,opaque,090088,ft2,1,1,1,0.36,1
-100,"Isoboard, 1.5 in thick RSI 1.48",rs-means,Unit,opaque,090089,ft2,1,1,1,0.238,1
-101,"12"" thick fibreglass, kraft coated ceiling insulation, 15"" wide blanket (RSI 6.69)",rs-means,Unit,opaque,090090,ft2,1,1,1,0.312,1
-102,"roof deck extruded polystyrene, 4"" (RSI 3.52), 25 PSI modifed to 1x4"" + 1x2"" sheets RSI 5.28",rs-means,Unit,opaque,090079,ft2,1,1.5,2,0.149,1
-103,"Isoboard, 0.75 in thick RSI .72",rs-means,Unit,opaque,090091,ft2,1,1,1,0.27,1
-104,"18"" thick fibreglass blown ceiling (RSI 7.9) ",rs-means,Unit,opaque,090092,ft2,1,1.2,1,0.305,1
-105,"16"" thick fibreglass blown ceiling (RSI 6.7)",rs-means,Unit,opaque,090092,ft2,1,1,1,0.305,1
-106,"roof deck extruded polystyrene, 4"" (RSI 3.52), 25 PSI modifed to 2x4"" sheets RSI 7.04",rs-means,Unit,opaque,090079,ft2,1,2,2,0.149,1
-107,"20"" thick fibreglass blown ceiling (RSI 8.63)",rs-means,Unit,opaque,090093,ft2,1,1,1,0.31,1
-108,gypsum wallboard 0.5 in thick,rs-means,Unit,opaque,110017,ft2,1,1,1,,1
-109,"Roof Insulation fastening, 4"" screws",rs-means,Unit,opaque,090094,Ea.,1,1,1,0,1
-110,"C.I.P. forms elevated slab floor hung from steel beams, including shoring, erection, bracing",rs-means,Unit,opaque,020095,ft2,1,1,1,0,1
-111,"C.I.P. forms elevated slab edge forms, including shoring, erection, bracing",rs-means,Unit,opaque,020096,SFCA,0.2,1,1,0,1
-112,"Reinforcing steel for elevated slabs and ceilings/roofa, grade 60, all assembly and accessories",rs-means,Unit,opaque,020097,ton,0.001275,1,1,0,1
-113,"Structural concrete, 3000 PSI, complete delivered and pum,ped in place",rs-means,Unit,opaque,020049,yd3,0.0231,1,1,0,1
-114,"Concrete surface treatment, curing, sprayed membrane compound",rs-means,Unit,opaque,020050,C.S.F.,0.01,1,1,0,1
-115,"Sprayed fireproofing, vermiculite cement, 0.25""",rs-means,Unit,opaque,090098,ft2,1,1,1,0.177,1
-116,"Roof Insulation fastening, 4"" screws modifed to 8"" screws",rs-means,Assembly,opaque,250099,Ea.,1,2,1,0,1
-117,"Floor system, light gauge (14 ga.) galvanized steel, ""C"" type joists, 10"" deep, 24"" spacing, 15' span, 116 PSF total load",rs-means,Unit,opaque,070100,LF,0.22,1,1,0,1
-118,"3/4"" thick CDX plywood subfloor, pneumatic nailed",rs-means,Unit,opaque,080101,ft2,1,1,1,0.27,1
-119,"Steel siding, bevelled with vinyl finish, 10"" width",rs-means,Unit,opaque,090102,ft2,1,1,1,0.31,1
-120,"Floor system, 2""x10"" joists, 24"" spacing,  116 PSF total load",rs-means,Unit,opaque,080103,MBF,0.00091,1,1,0,1
-121,"Isoboard, 1.5 "" 4 x 8 sheet, foil faced (RSI 1.28)",rs-means,Unit,opaque,090065,ft2,1,1,1,0.34,1
-122,"6"" sprayed polyurethane foam (RSI 6.86) modifed to 9"" foaming RSI 10.3",rs-means,Unit,opaque,090076,ft2,1,1.5,1.25,0.21,1.25
-123,"Concrete forms, wooden, erecting, bracing, stripping, cleaning",rs-means,Unit,opaque,020045,LF,0.03,1,1,0,1
-124,"Expansion joint, premolded bituminous fiber",rs-means,Unit,opaque,020104,LF,0.22,1,1,0,1
-125,"Welded wire, 6 x 6 sheets, 30 lbs/ft2",rs-means,Unit,opaque,020105,CSF,0.012,1,1,0,1
-126,"Structural concrete, ready mix 3500 psi, local aggregate, Type 1 Portland cement, no additives",rs-means,Unit,opaque,020106,yd3,0.019,1,1,0,1
-127,"Structural concrete, placing, slab on grade, direct chute, over 6\"" thick, includes leveling ",rs-means,Unit,opaque,020107,yd3,0.019,1,1,0,1
-128,"Concrete finishing, specified Random Access Floors ACI Classes 1, 2, 3 & 4",rs-means,Unit,opaque,020108,ft2,1,1,1,0,1
-129,"Concrete surface treatment, sprayed membrane",rs-means,Unit,opaque,020050,CSF,0.01,1,1,0,1
-130,"Vapur barrier, polyethylene 6 mil",rs-means,Unit,opaque,090109,SQ,0.01,1,1,0,1
-131,"Fine grading, finish grading, small area, to be paved with grader",rs-means,Unit,opaque,200110,SY,0.11,1,1,0,1
-132,"Fill, gravel fill, compacted, under floor slabs, 4\"" deep",rs-means,Unit,opaque,200111,ft2,1,1,1,0,1
-133,"Isoboard, 38 mm RSI 1.44",rs-means,Unit,opaque,090089,ft2,1,1,1,0.237,1
-134,"XPS, 3"" 2.64",rs-means,Unit,opaque,090112,ft2,1,1,1,0.18,1
-135,"Concrete finishing, fresh concrete flatwork, floors, basic finishing for unspecified flatwork",rs-means,Unit,opaque,020113,ft2,1.5,1,1,0,1
-136,"Washing brick, smooth brick, acid wash",rs-means,Unit,opaque,060114,ft2,1,1,1,0,1
-137,"Structural concrete, placing, slab on grade, direct chute, up to 6\"" thick, includes leveling ",rs-means,Unit,opaque,020115,yd3,0.025,1,1,0,1
-138,"Wood framing, partitions, standard & better lumber, 2\"" x 6\"" studs, 16\"" O.C., 10' high, includes single bottom plate and double top plate",rs-means,Unit,opaque,080116,LF,0.1,1,1,0,1
-139,"Sheet metal flashing, aluminum, flexible, mill finish, .019\"" thick, including up to 4 bends",rs-means,Unit,opaque,090117,ft2,0.1,1,1,0,1
-140,"Pre-formed joint seals, backer rod, polyethylene, 1/4\"" dia""",rs-means,Unit,opaque,090118,CLF,0.001,1,1,0,1
-141,"Joint sealants, caulking and sealants, butyl based, bulk, 1/4\"" x 1/2\""",rs-means,Unit,opaque,090119,LF,0.125,1,1,0,1
-142,"Structural concrete, placing, walls, pumped, 8\"" thick, includes leveling (strike off) & consolidation",rs-means,Unit,opaque,020120,yd3,0.018,1,1,0,1
-143,"Concrete finishing, specified Random Access Floors ACI Classes 1, 2, 3 & 4,",rs-means,Unit,opaque,020108,ft2,1,1,1,0,1
-144,"Structural concrete, placing, elevated slab, pumped, 6\"" to 10\"" thick, includes leveling (strike off) & consolidation",rs-means,Unit,opaque,020121,yd3,0.625,1,1,0,1
-145,Installation of 14 gauge steel floor joist to beams/headers,rs-means,Unit,opaque,070122,Ea.,0.3,1,1,0,1
-146,"Metal Door 20 gauge, includes hardware",rs-means,Unit,opaque,100123,Ea.,0.0476,1,1,0,1
-147,"Aluminum Commercial Entrance pair of 2'-6"" x 7'-0"" includes hardware",rs-means,Unit,opaque,100124,Ea.,0.02857,1,1,0,1
-148,"Fibreglass Door, 3'-0"" x 7'-0', includes hardware",rs-means,Unit,opaque,100125,Ea.,0.0476,1,1,0,1
-149,"Steel Overhead Rolling Door, 10'-0 x 10'-0'  includes hardware",rs-means,Unit,opaque,100126,Ea.,0.01,1,1,0,1
-150,"XPS, 25 PSI, 1"" RSI 0.88",rs-means,Unit,opaque,090127,ft2,1,1,1,0,1
-151,"XPS, 25 PSI, 1"" RSI 0.88 modifed to 1.5"" sheet RSI 1.32",rs-means,Unit,opaque,090127,ft2,1,1.5,1,0.253,1
-152,"Isoboard, 1"" RSI 1.94 modified to 2"" RSI 3.88",rs-means,Unit,opaque,090128,ft2,1,2,1,0.237,1
-153,"Fibreglasboard 1"" RSI 0.69",rs-means,Unit,opaque,090129,ft2,1,1,1,0,1
-154,10 inch fibreglass insulation RSI 5.86,rs-means,Unit,opaque,090088,ft2,1,1.05,1,0.36,1
-155,"Fibreglass Foil Faced 6 "" RSI 3.7 batts, 2 batts installed, modifed to 2 6"" batts back to back RSI 7.4",rs-means,Unit,opaque,090075,ft2,1,2,2,0.23,1
-156,concrete cutting through wall per inch of thickness,rs-means,Unit,opaque,020130,LF,1,1,1,1,1
-157,"galvanized LB studs, 16 ga x 6\"" W studs 16\"" O.C. x 10' H, incl galvanized top & bottom track, excl openings, headers, beams, bracing & bridging",rs-means,Unit,opaque,070131,LF,0.1,1,1,0,1
-158,"XPS, 3/4"" RSI 0.501",rs-means,Unit,opaque,080132,ft2,1,1,1,0,1
-159,"fibreglass batts, 6 in thick RSI 3.7",rs-means,Unit,opaque,090020,ft2,1,1,1,0.234,1
-160,"Fibreglass Foil Faced 6 "" RSI 3.7 batts",rs-means,Unit,opaque,090075,ft2,1,1,1,1,1
-161,"Kraft faced fiberglass, 3-1/2"" thick, 23"" wide, RSI1.93",rs-means,Unit,opaque,090133,ft2,1,1,1,1,1
-162,"Kraft faced fiberglass, 3-1/2"" thick, 23"" wide, RSI2.29",rs-means,Unit,opaque,090134,ft2,1,1,1,1,1
-163,"Polyurethane Foam 4.5"" thick, RSI5.72",rs-means,Unit,opaque,090066,ft2,1,1,1,1,1

data/lib/openstudio-standards/btap/costing/btap_measure_helper.rb

@@ -1,359 +0,0 @@
-module BTAPMeasureHelper
-  ###################Helper functions
-
-  # define the arguments that the user will input
-  def arguments(model)
-    args = OpenStudio::Measure::OSArgumentVector.new
-
-    if true == @use_json_package
-      #Set up package version of input.
-      json_default = {}
-      @measure_interface_detailed.each do |argument|
-        json_default[argument['name']] = argument["default_value"]
-      end
-      default = JSON.pretty_generate(json_default)
-      arg = OpenStudio::Ruleset::OSArgument.makeStringArgument('json_input', true)
-      arg.setDisplayName('Contains a json version of the input as a single package.')
-      arg.setDefaultValue(default)
-      args << arg
-    else
-      # Conductances for all surfaces and subsurfaces.
-      @measure_interface_detailed.each do |argument|
-        arg = nil
-        statement = nil
-        case argument['type']
-          when "String"
-            arg = OpenStudio::Ruleset::OSArgument.makeStringArgument(argument['name'], argument['is_required'])
-            arg.setDisplayName(argument['display_name'])
-            arg.setDefaultValue(argument['default_value'].to_s)
-
-          when "Double"
-            arg = OpenStudio::Ruleset::OSArgument.makeDoubleArgument(argument['name'], argument['is_required'])
-            arg.setDisplayName("#{argument['display_name']}")
-            arg.setDefaultValue("#{argument['default_value']}".to_f)
-
-          when "Choice"
-            arg = OpenStudio::Measure::OSArgument.makeChoiceArgument(argument['name'], argument['choices'], argument['is_required'])
-            arg.setDisplayName(argument['display_name'])
-            arg.setDefaultValue(argument['default_value'].to_s)
-            puts arg.defaultValueAsString
-
-          when "Bool"
-            arg = OpenStudio::Measure::OSArgument.makeBoolArgument(argument['name'], argument['is_required'])
-            arg.setDisplayName(argument['display_name'])
-            arg.setDefaultValue(argument['default_value'])
-
-
-          when "StringDouble"
-            if @use_string_double == false
-              arg = OpenStudio::Ruleset::OSArgument.makeDoubleArgument(argument['name'], argument['is_required'])
-              arg.setDefaultValue(argument['default_value'].to_f)
-            else
-              arg = OpenStudio::Ruleset::OSArgument.makeStringArgument(argument['name'], argument['is_required'])
-              arg.setDefaultValue(argument['default_value'].to_s)
-            end
-            arg.setDisplayName(argument['display_name'])
-        end
-        args << arg
-      end
-    end
-    return args
-  end
-
-  #returns a hash of the user inputs for you to use in your measure.
-  def get_hash_of_arguments(user_arguments, runner)
-    values = {}
-    if @use_json_package
-      return JSON.parse(runner.getStringArgumentValue('json_input', user_arguments))
-    else
-
-      @measure_interface_detailed.each do |argument|
-
-        case argument['type']
-          when "String", "Choice"
-            values[argument['name']] = runner.getStringArgumentValue(argument['name'], user_arguments)
-          when "Double"
-            values[argument['name']] = runner.getDoubleArgumentValue(argument['name'], user_arguments)
-          when "Bool"
-            values[argument['name']] = runner.getBoolArgumentValue(argument['name'], user_arguments)
-          when "StringDouble"
-            value = nil
-            if @use_string_double == false
-              value = (runner.getDoubleArgumentValue(argument['name'], user_arguments).to_f)
-            else
-              value = runner.getStringArgumentValue(argument['name'], user_arguments)
-              if valid_float?(value)
-                value = value.to_f
-              end
-            end
-            values[argument['name']] = value
-        end
-      end
-    end
-    return values
-  end
-
-  # boilerplate that validated ranges of inputs.
-  def validate_and_get_arguments_in_hash(model, runner, user_arguments)
-    return_value = true
-    values = get_hash_of_arguments(user_arguments, runner)
-    # use the built-in error checking
-    if !runner.validateUserArguments(arguments(model), user_arguments)
-      runner_register(runner, 'Error', "validateUserArguments failed... Check the argument definition for errors.")
-      return_value = false
-    end
-
-    # Validate arguments
-    errors = ""
-    @measure_interface_detailed.each do |argument|
-      case argument['type']
-        when "Double"
-          value = values[argument['name']]
-          if (not argument["max_double_value"].nil? and value.to_f > argument["max_double_value"].to_f) or
-              (not argument["min_double_value"].nil? and value.to_f < argument["min_double_value"].to_f)
-            error = "#{argument['name']} must be between #{argument["min_double_value"]} and #{argument["max_double_value"]}. You entered #{value.to_f} for this #{argument['name']}.\n Please enter a value withing the expected range.\n"
-            errors << error
-          end
-        when "StringDouble"
-          value = values[argument['name']]
-          if (not argument["valid_strings"].include?(value)) and (not valid_float?(value))
-            error = "#{argument['name']} must be a string that can be converted to a float, or one of these #{argument["valid_strings"]}. You have entered #{value}\n"
-            errors << error
-          elsif (not argument["max_double_value"].nil? and value.to_f > argument["max_double_value"]) or
-              (not argument["min_double_value"].nil? and value.to_f < argument["min_double_value"])
-            error = "#{argument['name']} must be between #{argument["min_double_value"]} and #{argument["max_double_value"]}. You entered #{value} for #{argument['name']}. Please enter a stringdouble value in the expected range.\n"
-            errors << error
-          end
-      end
-    end
-    #If any errors return false, else return the hash of argument values for user to use in measure.
-    if errors != ""
-      runner.registerError(errors)
-      return false
-    end
-    return values
-  end
-
-  # Helper method to see if str is a valid float.
-  def valid_float?(str)
-    !!Float(str) rescue false
-  end
-
-end
-
-module BTAPMeasureTestHelper
-  ##### Helper methods Do notouch unless you know the consequences.
-
-  #Boiler plate to default values and number of arguments against what is in your test's setup method.
-  def test_arguments_and_defaults
-    [true, false].each do |json_input|
-      [true, false].each do |string_double|
-        @use_json_package = json_input
-        @use_string_double = string_double
-
-        # Create an instance of the measure
-        measure = get_measure_object()
-        measure.use_json_package = @use_json_package
-        measure.use_string_double = @use_string_double
-        model = OpenStudio::Model::Model.new
-
-        # Create an instance of a runner
-        runner = OpenStudio::Measure::OSRunner.new(OpenStudio::WorkflowJSON.new)
-
-        # Test arguments and defaults
-        arguments = measure.arguments(model)
-        #convert whatever the input was into a hash. Then test.
-
-        #check number of arguments.
-        if @use_json_package
-          assert_equal(@measure_interface_detailed.size, JSON.parse(arguments[0].defaultValueAsString).size, "The measure should have #{@measure_interface_detailed.size} but actually has #{arguments.size}. Here the the arguement expected #{@measure_interface_detailed} and this is the actual #{arguments}")
-        else
-          assert_equal(@measure_interface_detailed.size, arguments.size, "The measure should have #{@measure_interface_detailed.size} but actually has #{arguments.size}. Here the the arguement expected #{@measure_interface_detailed} and this is the actual #{arguments}")
-          (@measure_interface_detailed).each_with_index do |argument_expected, index|
-            assert_equal(argument_expected['name'], arguments[index].name, "Measure argument name of #{argument_expected['name']} was expected, but got #{arguments[index].name} instead.")
-            assert_equal(argument_expected['display_name'], arguments[index].displayName, "Display name for argument #{argument_expected['name']} was expected to be #{argument_expected['display_name']}, but got #{arguments[index].displayName} instead.")
-            case argument_type(arguments[index])
-              when "String", "Choice"
-                assert_equal(argument_expected['default_value'].to_s, arguments[index].defaultValueAsString, "The default value for argument #{argument_expected['name']} was #{argument_expected['default_value']}, but actual was #{arguments[index].defaultValueAsString}")
-              when "Double", "Integer"
-                assert_equal(argument_expected['default_value'].to_f, arguments[index].defaultValueAsDouble.to_f, "The default value for argument #{argument_expected['name']} was #{argument_expected['default_value']}, but actual was #{arguments[index].defaultValueAsString}")
-              when "Bool"
-                assert_equal(argument_expected['default_value'], arguments[index].defaultValueAsBool, "The default value for argument #{argument_expected['name']} was #{argument_expected['default_value']}, but actual was #{arguments[index].defaultValueAsString}")
-            end
-          end
-        end
-      end
-    end
-  end
-
-  # Test argument ranges.
-  def test_argument_ranges
-    [true, false].each do |json_input|
-      [true, false].each do |string_double|
-        @use_json_package = json_input
-        @use_string_double = string_double
-        (@measure_interface_detailed).each_with_index do |argument|
-          if argument['type'] == 'Double' or argument['type'] == 'StringDouble'
-            puts "testing range for #{argument['name']} "
-            #Check over max
-            if not argument['max_double_value'].nil?
-              puts "testing max limit"
-              model = OpenStudio::Model::Model.new
-              input_arguments = @good_input_arguments.clone
-              over_max_value = argument['max_double_value'].to_f + 1.0
-              over_max_value = over_max_value.to_s if argument['type'].downcase == "StringDouble".downcase
-              input_arguments[argument['name']] = over_max_value
-              puts "Testing argument #{argument['name']} max limit of #{argument['max_double_value']}"
-              input_arguments = {'json_input' => JSON.pretty_generate(input_arguments)} if @use_json_package
-              run_measure(input_arguments, model)
-              runner = run_measure(input_arguments, model)
-              assert(runner.result.value.valueName != 'Success', "Checks did not stop a lower than limit value of #{over_max_value} for #{argument['name']}")
-              puts "Success: Testing argument #{argument['name']} max limit of #{argument['max_double_value']}"
-            end
-            #Check over max
-            if not argument['min_double_value'].nil?
-              puts "testing min limit"
-              model = OpenStudio::Model::Model.new
-              input_arguments = @good_input_arguments.clone
-              over_min_value = argument['min_double_value'].to_f - 1.0
-              over_min_value = over_max_value.to_s if argument['type'].downcase == "StringDouble".downcase
-              input_arguments[argument['name']] = over_min_value
-              puts "Testing argument #{argument['name']} min limit of #{argument['min_double_value']}"
-              input_arguments = {'json_input' => JSON.pretty_generate(input_arguments)} if @use_json_package
-              runner = run_measure(input_arguments, model)
-              assert(runner.result.value.valueName != 'Success', "Checks did not stop a lower than limit value of #{over_min_value} for #{argument['name']}")
-              puts "Success:Testing argument #{argument['name']} min limit of #{argument['min_double_value']}"
-            end
-
-          end
-          if (argument['type'] == 'StringDouble') and (not argument["valid_strings"].nil?) and @use_string_double
-            model = OpenStudio::Model::Model.new
-            input_arguments = @good_input_arguments.clone
-            input_arguments[argument['name']] = SecureRandom.uuid.to_s
-            puts "Testing argument #{argument['name']} min limit of #{argument['min_double_value']}"
-            input_arguments = {'json_input' => JSON.pretty_generate(input_arguments)} if @use_json_package
-            runner = run_measure(input_arguments, model)
-            assert(runner.result.value.valueName != 'Success', "Checks did not stop a lower than limit value of #{over_min_value} for #{argument['name']}")
-          end
-        end
-      end
-    end
-  end
-
-  # helper method to create necb archetype as a starting point for testing.
-  def create_necb_protype_model(building_type, climate_zone, epw_file, template)
-
-    osm_directory = "#{Dir.pwd}/output/#{building_type}-#{template}-#{climate_zone}-#{epw_file}"
-    FileUtils.mkdir_p (osm_directory) unless Dir.exist?(osm_directory)
-    #Get Weather climate zone from lookup
-    weather = BTAP::Environment::WeatherFile.new(epw_file)
-    #create model
-    building_name = "#{template}_#{building_type}"
-
-    prototype_creator = Standard.build(template)
-    model = prototype_creator.model_create_prototype_model(
-        epw_file: epw_file,
-        sizing_run_dir: osm_directory,
-        debug: @debug,
-        template: template,
-        building_type: building_type)
-
-    #set weather file to epw_file passed to model.
-    weather.set_weather_file(model)
-    return model
-  end
-
-  # Custom way to run the measure in the test.
-  def run_measure(input_arguments, model)
-
-    # This will create a instance of the measure you wish to test. It does this based on the test class name.
-    measure = get_measure_object()
-    measure.use_json_package = @use_json_package
-    measure.use_string_double = @use_string_double
-    # Return false if can't
-    return false if false == measure
-    arguments = measure.arguments(model)
-    argument_map = OpenStudio::Measure.convertOSArgumentVectorToMap(arguments)
-    runner = OpenStudio::Measure::OSRunner.new(OpenStudio::WorkflowJSON.new)
-    #Check if
-
-    # Set the arguements in the argument map use json or real arguments.
-    if @use_json_package
-      argument = arguments[0].clone
-      assert(argument.setValue(input_arguments['json_input']), "Could not set value for 'json_input' to #{input_arguments['json_input']}")
-      argument_map['json_input'] = argument
-    else
-      input_arguments.each_with_index do |(key, value), index|
-        argument = arguments[index].clone
-        if argument_type(argument) == "Double"
-          #forces it to a double if it is a double.
-          assert(argument.setValue(value.to_f), "Could not set value for #{key} to #{value}")
-        else
-          assert(argument.setValue(value.to_s), "Could not set value for #{key} to #{value}")
-        end
-        argument_map[key] = argument
-      end
-    end
-    #run the measure
-    measure.run(model, runner, argument_map)
-    runner.result
-    return runner
-  end
-
-
-  #Fancy way of getting the measure object automatically.
-  def get_measure_object()
-    measure_class_name = self.class.name.to_s.match(/(BTAP.*)(\_Test)/i).captures[0]
-    measure = nil
-    eval "measure = #{measure_class_name}.new"
-    if measure.nil?
-      puts "Measure class #{measure_class_name} is invalid. Please ensure the test class name is of the form 'MeasureName_Test' "
-      return false
-    end
-    return measure
-  end
-
-  #Determines the OS argument type dynamically.
-  def argument_type(argument)
-    case argument.type.value
-      when 0
-        return "Bool"
-      when 1 #Double
-        return "Double"
-      when 2 #Quantity
-        return "Quantity"
-      when 3 #Integer
-        return "Integer"
-      when 4
-        return "String"
-      when 5 #Choice
-        return "Choice"
-      when 6 #Path
-        return "Path"
-      when 7 #Separator
-        return "Separator"
-      else
-        return "Blah"
-    end
-  end
-
-  # Valid float helper.
-  def valid_float?(str)
-    !!Float(str) rescue false
-  end
-
-  #Method does a deep copy of a model.
-  def copy_model(model)
-    copy_model = OpenStudio::Model::Model.new
-    # remove existing objects from model
-    handles = OpenStudio::UUIDVector.new
-    copy_model.objects.each do |obj|
-      handles << obj.handle
-    end
-    copy_model.removeObjects(handles)
-    # put contents of new_model into model_to_replace
-    copy_model.addObjects(model.toIdfFile.objects)
-    return copy_model
-  end
-
-end