openstudio-standards 0.7.1 → 0.8.0.rc1

data/lib/openstudio-standards/service_water_heating/information.rb

@@ -0,0 +1,69 @@
+module OpenstudioStandards
+  # The ServiceWaterHeating module provides methods to create, modify, and get information about service water heating
+  module ServiceWaterHeating
+    # @!group Information
+    # Methods to add get information about service water heating equipment and loops
+
+    # Determines water heater capacity and volume from an array of water use equipment.
+    #
+    # @param water_use_equipment_array [Array<OpenStudio::Model::WaterUseEquipment>] Array of water use equipment objects served by this water heater
+    # @param capacity_to_volume_ratio [Double] storage volume in gallons per kBtu/hr of capacity
+    # @param water_heater_efficiency [Double] water heater thermal efficiency, fraction
+    # @param inlet_temperature [Double] inlet cold water temperature, degrees Fahrenheit
+    # @param supply_temperature [Double] supply water temperature from the tank, degrees Fahrenheit
+    # @param peak_flow_fraction [Double] a variable for system diversity as fraction of peak flow when setting water heater capacity
+    # @param minimum_volume [Double] minimum allowable volume of the water heater, in gallons
+    # @return [Hash] hash with water_heater_capacity in watts and water_heater_volume in m^3
+    def self.water_heater_sizing_from_water_use_equipment(water_use_equipment_array,
+                                                          capacity_to_volume_ratio: 1.0,
+                                                          water_heater_efficiency: 0.8,
+                                                          inlet_temperature: 40.0,
+                                                          supply_temperature: 140.0,
+                                                          peak_flow_fraction: 1.0,
+                                                          minimum_volume: 40.0)
+      # Initialize hash
+      water_heater_sizing = {}
+
+      # Get the maximum flow rates for all pieces of water use equipment
+      adjusted_max_flow_rates_gal_per_hr = []
+      water_use_equipment_array.sort.each do |water_use_equip|
+        water_use_equip_sch = water_use_equip.flowRateFractionSchedule
+        next if water_use_equip_sch.empty?
+
+        water_use_equip_sch = water_use_equip_sch.get
+        max_sch_value = OpenstudioStandards::Schedules.schedule_get_min_max(water_use_equip_sch)['max']
+
+        # Get peak flow rate from water use equipment definition
+        peak_flow_rate_m3_per_s = water_use_equip.waterUseEquipmentDefinition.peakFlowRate
+
+        # Calculate adjusted flow rate based on the peak fraction found in the flow rate fraction schedule
+        adjusted_peak_flow_rate_m3_per_s = max_sch_value * peak_flow_rate_m3_per_s
+        adjusted_max_flow_rates_gal_per_hr << OpenStudio.convert(adjusted_peak_flow_rate_m3_per_s, 'm^3/s', 'gal/hr').get
+      end
+
+      # Sum gph values from water use equipment to use in formula
+      total_adjusted_flow_rate_gal_per_hr = adjusted_max_flow_rates_gal_per_hr.sum
+
+      # Calculate capacity based on analysis of combined water use equipment maximum flow rates and schedules
+      # Max gal/hr * 8.4 lb/gal * 1 Btu/lb F * (120F - 40F)/0.8 = Btu/hr
+      water_heater_capacity_btu_per_hr = peak_flow_fraction * total_adjusted_flow_rate_gal_per_hr * 8.4 * 1.0 * (supply_temperature - inlet_temperature) / water_heater_efficiency
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', "Capacity of #{water_heater_capacity_btu_per_hr.round} Btu/hr = #{peak_flow_fraction} peak fraction * #{total_adjusted_flow_rate_gal_per_hr.round} gal/hr * 8.4 lb/gal * 1.0 Btu/lb F * (#{supply_temperature.round} - #{inlet_temperature.round} deltaF / #{water_heater_efficiency} htg eff).")
+      water_heater_capacity_w = OpenStudio.convert(water_heater_capacity_btu_per_hr, 'Btu/hr', 'W').get
+
+      # Calculate volume based on capacity
+      # A.1.4 Total Storage Volume and Water Heater Capacity of PrototypeModelEnhancements_2014_0.pdf shows 1 gallon of storage to 1 kBtu/h of capacity
+      water_heater_capacity_kbtu_per_hr = OpenStudio.convert(water_heater_capacity_btu_per_hr, 'Btu/hr', 'kBtu/hr').get
+      water_heater_volume_gal = water_heater_capacity_kbtu_per_hr * capacity_to_volume_ratio
+
+      # increase tank size to the minimum volume if calculated value is smaller
+      water_heater_volume_gal = minimum_volume if water_heater_volume_gal < minimum_volume # gal
+      water_heater_volume_m3 = OpenStudio.convert(water_heater_volume_gal, 'gal', 'm^3').get
+
+      # Populate return hash
+      water_heater_sizing[:water_heater_capacity] = water_heater_capacity_w
+      water_heater_sizing[:water_heater_volume] = water_heater_volume_m3
+
+      return water_heater_sizing
+    end
+  end
+end

data/lib/openstudio-standards/sql_file/fenestration.rb

@@ -12,7 +12,7 @@ module OpenstudioStandards
       # check for sql file
       sql = construction.model.sqlFile
       unless sql.is_initialized
-        OpenStudio.logFree(OpenStudio::Error, 'openstudio.standards.SqlFile', 'Model has no sql file containing results, cannot lookup data.')
+        OpenStudio.logFree(OpenStudio::Warn, 'openstudio.standards.SqlFile', 'Model has no sql file containing results, cannot lookup data.')
         return false
       end
       sql = sql.get

data/lib/openstudio-standards/standards/Standards.AirConditionerVariableRefrigerantFlow.rb

@@ -0,0 +1,154 @@
+class Standard
+  # @!group AirConditionerVariableRefrigerantFlow
+
+  # find search criteria
+  #
+  # @param air_conditioner_variable_refrigerant_flow [OpenStudio::Model::AirConditionerVariableRefrigerantFlow] vrf object
+  # @return [Hash] used for standards_lookup_table(model)
+  def air_conditioner_variable_refrigerant_flow_find_search_criteria(air_conditioner_variable_refrigerant_flow)
+    # Define the criteria to find the boiler properties
+    # in the hvac standards data set.
+    search_criteria = {}
+    search_criteria['template'] = template
+
+    search_criteria['subcategory'] = 'VRF multisplit system'
+    if air_conditioner_variable_refrigerant_flow.condenserType == 'AirCooled'
+      search_criteria['equipment_type'] = 'AirCooled'
+    elsif air_conditioner_variable_refrigerant_flow.condenserType == 'WaterCooled'
+      search_criteria['equipment_type'] = 'WaterSource'
+    else
+      search_criteria['equipment_type'] = ''
+    end
+
+    return search_criteria
+  end
+
+  # Find capacity in W
+  #
+  # @param air_conditioner_variable_refrigerant_flow [OpenStudio::Model::AirConditionerVariableRefrigerantFlow] vrf unit
+  # @return [Double] capacity in W
+  def air_conditioner_variable_refrigerant_flow_find_capacity(air_conditioner_variable_refrigerant_flow)
+    capacity_w = nil
+    if air_conditioner_variable_refrigerant_flow.grossRatedTotalCoolingCapacity.is_initialized
+      capacity_w = air_conditioner_variable_refrigerant_flow.grossRatedTotalCoolingCapacity.get
+    elsif air_conditioner_variable_refrigerant_flow.autosizedGrossRatedTotalCoolingCapacity.is_initialized
+      capacity_w = air_conditioner_variable_refrigerant_flow.autosizedGrossRatedTotalCoolingCapacity.get
+    else
+      OpenStudio.logFree(OpenStudio::Warn, 'openstudio.standards.AirConditionerVariableRefrigerantFlow', "For #{air_conditioner_variable_refrigerant_flow.name} capacity is not available, cannot apply efficiency standard.")
+      return false
+    end
+
+    return capacity_w
+  end
+
+  # Finds lookup object in standards and return minimum thermal efficiency
+  #
+  # @param air_conditioner_variable_refrigerant_flow [OpenStudio::Model::AirConditionerVariableRefrigerantFlow] vrf unit
+  # @return [Boolean] returns true if successful, false if not
+  def air_conditioner_variable_refrigerant_flow_apply_efficiency_and_curves(air_conditioner_variable_refrigerant_flow)
+    successfully_set_all_properties = false
+
+    # Define the criteria to find the vrf properties
+    # in the hvac standards data set.
+    search_criteria = air_conditioner_variable_refrigerant_flow_find_search_criteria(air_conditioner_variable_refrigerant_flow)
+
+    # Get the capacity
+    capacity_w = air_conditioner_variable_refrigerant_flow_find_capacity(air_conditioner_variable_refrigerant_flow)
+
+    # Convert capacity to Btu/hr
+    capacity_btu_per_hr = OpenStudio.convert(capacity_w, 'W', 'Btu/hr').get
+    capacity_kbtu_per_hr = OpenStudio.convert(capacity_w, 'W', 'kBtu/hr').get
+
+    # Get the vrf properties
+    search_criteria['equipment_type'] << 'CoolingMode'
+    vrf_props_cooling = model_find_object(standards_data['vrfs'], search_criteria, capacity_btu_per_hr)
+    unless vrf_props_cooling
+      OpenStudio.logFree(OpenStudio::Warn, 'openstudio.standards.AirConditionerVariableRefrigerantFlow', "For #{air_conditioner_variable_refrigerant_flow.name}, cannot find VRF cooling properties with search criteria #{search_criteria}, cannot apply efficiency standard.")
+      successfully_set_all_properties = false
+      return successfully_set_all_properties
+    end
+    search_criteria['equipment_type'].sub('Cooling', 'Heating')
+    vrf_props_heating = model_find_object(standards_data['vrfs'], search_criteria, capacity_btu_per_hr)
+    unless vrf_props_heating
+      OpenStudio.logFree(OpenStudio::Warn, 'openstudio.standards.AirConditionerVariableRefrigerantFlow', "For #{air_conditioner_variable_refrigerant_flow.name}, cannot find VRF heating properties with search criteria #{search_criteria}, cannot apply efficiency standard.")
+      successfully_set_all_properties = false
+      return successfully_set_all_properties
+    end
+
+    # Get the minimum efficiency standards
+    cooling_cop = nil
+    heating_cop = nil
+
+    # If specified as SEER
+    unless vrf_props_cooling['minimum_seasonal_energy_efficiency_ratio'].nil?
+      min_seer = vrf_props_cooling['minimum_seasonal_energy_efficiency_ratio']
+      cooling_cop = seer_to_cop_no_fan(min_seer)
+      new_comp_name = "#{air_conditioner_variable_refrigerant_flow.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{min_seer}SEER"
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirConditionerVariableRefrigerantFlow', "For #{template}: #{air_conditioner_variable_refrigerant_flow.name}: Cooling Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; SEER = #{min_seer}")
+    end
+
+    # If specified as SEER2
+    # TODO: assumed to be the same as SEER for now
+    unless vrf_props_cooling['minimum_seasonal_energy_efficiency_ratio_2'].nil?
+      min_seer = vrf_props_cooling['minimum_seasonal_energy_efficiency_ratio_2']
+      cooling_cop = seer_to_cop_no_fan(min_seer)
+      new_comp_name = "#{air_conditioner_variable_refrigerant_flow.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{min_seer}SEER"
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirConditionerVariableRefrigerantFlow', "For #{template}: #{air_conditioner_variable_refrigerant_flow.name}: Cooling Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; SEER = #{min_seer}")
+    end
+
+    # If specified as EER
+    unless vrf_props_cooling['minimum_energy_efficiency_ratio'].nil?
+      min_eer = vrf_props_cooling['minimum_energy_efficiency_ratio']
+      cooling_cop = eer_to_cop_no_fan(min_eer)
+      new_comp_name = "#{air_conditioner_variable_refrigerant_flow.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{min_eer}EER"
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirConditionerVariableRefrigerantFlow', "For #{template}: #{air_conditioner_variable_refrigerant_flow.name}: Cooling Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; EER = #{min_eer}")
+    end
+
+    # If specified as EER2
+    # TODO: assumed to be the same as EER for now
+    unless vrf_props_cooling['minimum_energy_efficiency_ratio_2'].nil?
+      min_eer = vrf_props_cooling['minimum_energy_efficiency_ratio_2']
+      cooling_cop = eer_to_cop_no_fan(min_eer)
+      new_comp_name = "#{air_conditioner_variable_refrigerant_flow.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{min_eer}EER"
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirConditionerVariableRefrigerantFlow', "For #{template}: #{air_conditioner_variable_refrigerant_flow.name}: Cooling Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; EER = #{min_eer}")
+    end
+
+    # If specified as HSPF
+    unless vrf_props_heating['minimum_heating_seasonal_performance_factor'].nil?
+      min_hspf = vrf_props_heating['minimum_heating_seasonal_performance_factor']
+      heating_cop = hspf_to_cop_no_fan(min_hspf)
+      new_comp_name = "#{air_conditioner_variable_refrigerant_flow.name} #{capacity_kbtu_per_hr.round} Clg kBtu/hr #{min_hspf.round(1)}HSPF"
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirConditionerVariableRefrigerantFlow', "For #{template}: #{air_conditioner_variable_refrigerant_flow.name}: Cooling Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; HSPF = #{min_hspf}")
+    end
+
+    # If specified as HSPF2
+    # TODO: assumed to be the same as HSPF for now
+    unless vrf_props_heating['minimum_heating_seasonal_performance_factor_2'].nil?
+      min_hspf = vrf_props_heating['minimum_heating_seasonal_performance_factor_2']
+      heating_cop = hspf_to_cop_no_fan(min_hspf)
+      new_comp_name = "#{air_conditioner_variable_refrigerant_flow.name} #{capacity_kbtu_per_hr.round} Clg kBtu/hr #{min_hspf.round(1)}HSPF"
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirConditionerVariableRefrigerantFlow', "For #{template}: #{air_conditioner_variable_refrigerant_flow.name}: Cooling Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; HSPF = #{min_hspf}")
+    end
+
+    # If specified as COP
+    unless vrf_props_heating['minimum_coefficient_of_performance_heating'].nil?
+      min_coph = vrf_props_heating['minimum_coefficient_of_performance_heating']
+      heating_cop = cop_heating_to_cop_heating_no_fan(min_coph, OpenStudio.convert(capacity_kbtu_per_hr, 'kBtu/hr', 'W').get)
+      new_comp_name = "#{air_conditioner_variable_refrigerant_flow.name} #{capacity_kbtu_per_hr.round} Clg kBtu/hr #{min_coph.round(1)}COPH"
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirConditionerVariableRefrigerantFlow', "For #{template}: #{air_conditioner_variable_refrigerant_flow.name}: Cooling Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; COPH = #{min_coph}")
+    end
+
+    # Set the name
+    air_conditioner_variable_refrigerant_flow.setName(new_comp_name)
+
+    # Set the efficiency values
+    unless cooling_cop.nil?
+      air_conditioner_variable_refrigerant_flow.setGrossRatedCoolingCOP(cooling_cop)
+    end
+    unless heating_cop.nil?
+      air_conditioner_variable_refrigerant_flow.setGrossRatedHeatingCOP(heating_cop)
+    end
+
+    return successfully_set_all_properties
+  end
+end

data/lib/openstudio-standards/standards/Standards.AirLoopHVAC.rb

@@ -965,6 +965,11 @@ class Standard
       is_dc = true
     end
 
+    # Process climate zone:
+    # Moisture regime is not needed for climate zone 8
+    climate_zone = climate_zone.split('-')[-1]
+    climate_zone = '8' if climate_zone.include?('8')
+
     # Retrieve economizer limits from JSON
     search_criteria = {
       'template' => template,
@@ -978,7 +983,7 @@ class Standard
     end
 
     # Determine the minimum capacity and whether or not it is a data center
-    minimum_capacity_btu_per_hr = econ_limits['capacity_limit']
+    minimum_capacity_btu_per_hr = econ_limits['minimum_capacity']
 
     # A big number of btu per hr as the minimum requirement if nil in spreadsheet
     infinity_btu_per_hr = 999_999_999_999
@@ -1115,6 +1120,11 @@ class Standard
     when 'NoEconomizer'
       return [nil, nil, nil]
     when 'FixedDryBulb'
+      # Process climate zone:
+      # Moisture regime is not needed for climate zone 8
+      climate_zone = climate_zone.split('-')[-1]
+      climate_zone = '8' if climate_zone.include?('8')
+
       search_criteria = {
         'template' => template,
         'climate_zone' => climate_zone
@@ -1122,10 +1132,10 @@ class Standard
       econ_limits = model_find_object(standards_data['economizers'], search_criteria)
       drybulb_limit_f = econ_limits['fixed_dry_bulb_high_limit_shutoff_temp']
     when 'FixedEnthalpy'
-      enthalpy_limit_btu_per_lb = 28
+      enthalpy_limit_btu_per_lb = 28.0
     when 'FixedDewPointAndDryBulb'
-      drybulb_limit_f = 75
-      dewpoint_limit_f = 55
+      drybulb_limit_f = 75.0
+      dewpoint_limit_f = 55.0
     end
 
     return [drybulb_limit_f, enthalpy_limit_btu_per_lb, dewpoint_limit_f]
@@ -1890,14 +1900,27 @@ class Standard
   # @param heat_exchanger_type [String] heat exchanger type Rotary or Plate
   # @return [OpenStudio::Model::HeatExchangerAirToAirSensibleAndLatent] erv to apply efficiency values
   def air_loop_hvac_apply_energy_recovery_ventilator_efficiency(erv, erv_type: 'ERV', heat_exchanger_type: 'Rotary')
-    erv.setSensibleEffectivenessat100HeatingAirFlow(0.7)
-    erv.setLatentEffectivenessat100HeatingAirFlow(0.6)
-    erv.setSensibleEffectivenessat75HeatingAirFlow(0.7)
-    erv.setLatentEffectivenessat75HeatingAirFlow(0.6)
-    erv.setSensibleEffectivenessat100CoolingAirFlow(0.75)
-    erv.setLatentEffectivenessat100CoolingAirFlow(0.6)
-    erv.setSensibleEffectivenessat75CoolingAirFlow(0.75)
-    erv.setLatentEffectivenessat75CoolingAirFlow(0.6)
+    if erv.model.version < OpenStudio::VersionString.new('3.8.0')
+      erv.setSensibleEffectivenessat100HeatingAirFlow(0.7)
+      erv.setLatentEffectivenessat100HeatingAirFlow(0.6)
+      erv.setSensibleEffectivenessat75HeatingAirFlow(0.7)
+      erv.setLatentEffectivenessat75HeatingAirFlow(0.6)
+      erv.setSensibleEffectivenessat100CoolingAirFlow(0.75)
+      erv.setLatentEffectivenessat100CoolingAirFlow(0.6)
+      erv.setSensibleEffectivenessat75CoolingAirFlow(0.75)
+      erv.setLatentEffectivenessat75CoolingAirFlow(0.6)
+    else
+      values = Hash.new{|hash, key| hash[key] = Hash.new}
+      values['Sensible Heating'][0.75] = 0.7
+      values['Sensible Heating'][1.0] = 0.7
+      values['Latent Heating'][0.75] = 0.6
+      values['Latent Heating'][1.0] = 0.6
+      values['Sensible Cooling'][0.75] = 0.75
+      values['Sensible Cooling'][1.0] = 0.75
+      values['Latent Cooling'][0.75] = 0.6
+      values['Latent Cooling'][1.0] = 0.6
+      erv = OpenstudioStandards::HVAC.heat_exchanger_air_to_air_set_effectiveness_values(erv, defaults: false, values: values)
+    end
     return erv
   end
 

data/lib/openstudio-standards/standards/Standards.CoilCoolingDXMultiSpeed.rb

@@ -84,13 +84,24 @@ class Standard
     capacity_btu_per_hr = OpenStudio.convert(capacity_w, 'W', 'Btu/hr').get
     capacity_kbtu_per_hr = OpenStudio.convert(capacity_w, 'W', 'kBtu/hr').get
 
-    # Lookup efficiencies depending on whether it is a unitary AC or a heat pump
-    ac_props = nil
-    ac_props = if heat_pump == true
-                 model_find_object(standards_data['heat_pumps'], search_criteria, capacity_btu_per_hr, Date.today)
-               else
-                 model_find_object(standards_data['unitary_acs'], search_criteria, capacity_btu_per_hr, Date.today)
-               end
+    # Get efficiencies data depending on whether it is a unitary AC or a heat pump
+    coil_efficiency_data = if coil_dx_heat_pump?(coil_cooling_dx_multi_speed)
+                             standards_data['heat_pumps']
+                           else
+                             standards_data['unitary_acs']
+                           end
+
+    # Additional search criteria
+    if (coil_efficiency_data[0].keys.include?('equipment_type') || ((template == 'NECB2011') || (template == 'NECB2015') || (template == 'NECB2017') || (template == 'NECB2020') || (template == 'BTAPPRE1980') ||
+      (template == 'BTAP1980TO2010'))) && !coil_dx_heat_pump?(coil_cooling_dx_multi_speed)
+      search_criteria['equipment_type'] = 'Air Conditioners'
+    end
+    if coil_efficiency_data[0].keys.include?('region')
+      search_criteria['region'] = nil # non-nil values are currently used for residential products
+    end
+
+    # Lookup efficiency
+    ac_props = model_find_object(coil_efficiency_data, search_criteria, capacity_btu_per_hr, Date.today)
 
     # Check to make sure properties were found
     if ac_props.nil?
@@ -100,7 +111,13 @@ class Standard
     end
 
     # Make the COOL-CAP-FT curve
-    cool_cap_ft = model_add_curve(model, ac_props['cool_cap_ft'], standards)
+    cool_cap_ft = nil
+    if ac_props['cool_cap_ft']
+      cool_cap_ft = model_add_curve(coil_cooling_dx_multi_speed.model, ac_props['cool_cap_ft'])
+    else
+      cool_cap_ft_curve_name = coil_dx_cap_ft(coil_cooling_dx_multi_speed)
+      cool_cap_ft = model_add_curve(coil_cooling_dx_multi_speed.model, cool_cap_ft_curve_name)
+    end
     if cool_cap_ft
       clg_stages.each do |stage|
         stage.setTotalCoolingCapacityFunctionofTemperatureCurve(cool_cap_ft)
@@ -111,7 +128,13 @@ class Standard
     end
 
     # Make the COOL-CAP-FFLOW curve
-    cool_cap_fflow = model_add_curve(model, ac_props['cool_cap_fflow'], standards)
+    cool_cap_fflow = nil
+    if ac_props['cool_cap_fflow']
+      cool_cap_fflow = model_add_curve(coil_coolingcoil_cooling_dx_multi_speed_dx_two_speed.model, ac_props['cool_cap_fflow'])
+    else
+      cool_cap_fflow_curve_name = coil_dx_cap_fff(coil_cooling_dx_multi_speed)
+      cool_cap_fflow = model_add_curve(coil_cooling_dx_multi_speed.model, cool_cap_fflow_curve_name)
+    end
     if cool_cap_fflow
       clg_stages.each do |stage|
         stage.setTotalCoolingCapacityFunctionofFlowFractionCurve(cool_cap_fflow)
@@ -122,7 +145,13 @@ class Standard
     end
 
     # Make the COOL-EIR-FT curve
-    cool_eir_ft = model_add_curve(model, ac_props['cool_eir_ft'], standards)
+    cool_eir_ft = nil
+    if ac_props['cool_eir_ft']
+      cool_eir_ft = model_add_curve(coil_cooling_dx_multi_speed.model, ac_props['cool_eir_ft'])
+    else
+      cool_eir_ft_curve_name = coil_dx_eir_ft(coil_cooling_dx_multi_speed)
+      cool_eir_ft = model_add_curve(coil_cooling_dx_multi_speed.model, cool_eir_ft_curve_name)
+    end
     if cool_eir_ft
       clg_stages.each do |stage|
         stage.setEnergyInputRatioFunctionofTemperatureCurve(cool_eir_ft)
@@ -133,7 +162,13 @@ class Standard
     end
 
     # Make the COOL-EIR-FFLOW curve
-    cool_eir_fflow = model_add_curve(model, ac_props['cool_eir_fflow'], standards)
+    cool_eir_fflow = nil
+    if ac_props['cool_eir_fflow']
+      cool_eir_fflow = model_add_curve(coil_cooling_dx_multi_speed.model, ac_props['cool_eir_fflow'])
+    else
+      cool_eir_fflow_curve_name = coil_dx_eir_fff(coil_cooling_dx_multi_speed)
+      cool_eir_fflow = model_add_curve(coil_cooling_dx_multi_speed.model, cool_eir_fflow_curve_name)
+    end
     if cool_eir_fflow
       clg_stages.each do |stage|
         stage.setEnergyInputRatioFunctionofFlowFractionCurve(cool_eir_fflow)
@@ -144,7 +179,13 @@ class Standard
     end
 
     # Make the COOL-PLF-FPLR curve
-    cool_plf_fplr = model_add_curve(model, ac_props['cool_plf_fplr'], standards)
+    cool_plf_fplr = nil
+    if ac_props['cool_plf_fplr']
+      cool_plf_fplr = model_add_curve(coil_cooling_dx_multi_speed.model, ac_props['cool_plf_fplr'])
+    else
+      cool_plf_fplr_curve_name = coil_dx_plf_fplr(coil_cooling_dx_multi_speed)
+      cool_plf_fplr = model_add_curve(coil_cooling_dx_multi_speed.model, cool_plf_fplr_curve_name)
+    end
     if cool_plf_fplr
       clg_stages.each do |stage|
         stage.setPartLoadFractionCorrelationCurve(cool_plf_fplr)
@@ -164,50 +205,22 @@ class Standard
       capacity_btu_per_hr = 15_000 if capacity_btu_per_hr > 15_000
       ptac_eer = ptac_eer_coeff_1 + (ptac_eer_coeff_2 * capacity_btu_per_hr)
       cop = eer_to_cop_no_fan(ptac_eer)
-      # self.setName("#{self.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{ptac_eer}EER")
       new_comp_name = "#{coil_cooling_dx_multi_speed.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{ptac_eer}EER"
       OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.CoilCoolingDXMultiSpeed', "For #{template}: #{coil_cooling_dx_multi_speed.name}: #{cooling_type} #{heating_type} #{subcategory} Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; EER = #{ptac_eer}")
     end
 
-    # If specified as SEER
-    unless ac_props['minimum_seasonal_energy_efficiency_ratio'].nil?
-      min_seer = ac_props['minimum_seasonal_energy_efficiency_ratio']
-      cop = seer_to_cop_no_fan(min_seer)
-      new_comp_name = "#{coil_cooling_dx_multi_speed.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{min_seer}SEER"
-      #      self.setName("#{self.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{min_seer}SEER")
-      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.CoilCoolingDXMultiSpeed', "For #{template}: #{coil_cooling_dx_multi_speed.name}: #{cooling_type} #{heating_type} #{subcategory} Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; SEER = #{min_seer}")
-    end
-
-    # If specified as EER
-    unless ac_props['minimum_energy_efficiency_ratio'].nil?
-      min_eer = ac_props['minimum_energy_efficiency_ratio']
-      cop = eer_to_cop_no_fan(min_eer)
-      new_comp_name = "#{coil_cooling_dx_multi_speed.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{min_eer}EER"
-      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.CoilCoolingDXMultiSpeed', "For #{template}: #{coil_cooling_dx_multi_speed.name}: #{cooling_type} #{heating_type} #{subcategory} Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; EER = #{min_eer}")
-    end
+    # Preserve the original name
+    orig_name = coil_cooling_dx_single_speed.name.to_s
 
-    # if specified as SEER (heat pump)
-    unless ac_props['minimum_seasonal_efficiency'].nil?
-      min_seer = ac_props['minimum_seasonal_efficiency']
-      cop = seer_to_cop_no_fan(min_seer)
-      new_comp_name = "#{coil_cooling_dx_multi_speed.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{min_seer}SEER"
-      #      self.setName("#{self.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{min_seer}SEER")
-      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.CoilCoolingDXMultiSpeed', "For #{template}: #{coil_cooling_dx_multi_speed.name}: #{cooling_type} #{heating_type} #{subcategory} Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; SEER = #{min_seer}")
-    end
+    # Find the minimum COP and rename with efficiency rating
+    new_comp_name, cop = coil_cooling_dx_multi_speed_standard_minimum_cop(coil_cooling_dx_multi_speed)
 
-    # If specified as EER (heat pump)
-    unless ac_props['minimum_full_load_efficiency'].nil?
-      min_eer = ac_props['minimum_full_load_efficiency']
-      cop = eer_to_cop_no_fan(min_eer)
-      new_comp_name = "#{coil_cooling_dx_multi_speed.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{min_eer}EER"
-      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.CoilCoolingDXMultiSpeed', "For #{template}: #{coil_cooling_dx_multi_speed.name}: #{cooling_type} #{heating_type} #{subcategory} Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; EER = #{min_eer}")
-    end
+    sql_db_vars_map[new_comp_name] = orig_name
 
-    sql_db_vars_map[new_comp_name] = name.to_s
+    # Set the new name
     coil_cooling_dx_multi_speed.setName(new_comp_name)
 
     # Set the efficiency values
-
     unless cop.nil?
       clg_stages.each do |istage|
         istage.setGrossRatedCoolingCOP(cop)
@@ -226,14 +239,14 @@ class Standard
     clg_stages = coil_cooling_dx_multi_speed.stages
     if clg_stages.last.grossRatedTotalCoolingCapacity.is_initialized
       capacity_w = clg_stages.last.grossRatedTotalCoolingCapacity.get
-    elsif (clg_stages.size == 1) && coil_cooling_dx_multi_speed.autosizedSpeed1GrossRatedTotalCoolingCapacity.is_initialized
-      capacity_w = coil_cooling_dx_multi_speed.autosizedSpeed1GrossRatedTotalCoolingCapacity.get
-    elsif (clg_stages.size == 2) && coil_cooling_dx_multi_speed.autosizedSpeed2GrossRatedTotalCoolingCapacity.is_initialized
-      capacity_w = coil_cooling_dx_multi_speed.autosizedSpeed2GrossRatedTotalCoolingCapacity.get
-    elsif (clg_stages.size == 3) && coil_cooling_dx_multi_speed.autosizedSpeed3GrossRatedTotalCoolingCapacity.is_initialized
-      capacity_w = coil_cooling_dx_multi_speed.autosizedSpeed3GrossRatedTotalCoolingCapacity.get
-    elsif (clg_stages.size == 4) && coil_cooling_dx_multi_speed.autosizedSpeed4GrossRatedTotalCoolingCapacity.is_initialized
-      capacity_w = coil_cooling_dx_multi_speed.autosizedSpeed4GrossRatedTotalCoolingCapacity.get
+    elsif (clg_stages.size == 1) && coil_cooling_dx_multi_speed.stages[0].autosizedSpeedRatedTotalCoolingCapacity.is_initialized
+      capacity_w = coil_cooling_dx_multi_speed.stages[0].autosizedSpeedRatedTotalCoolingCapacity.get
+    elsif (clg_stages.size == 2) && coil_cooling_dx_multi_speed.stages[1].autosizedGrossRatedTotalCoolingCapacity.is_initialized
+      capacity_w = coil_cooling_dx_multi_speed.stages[1].autosizedGrossRatedTotalCoolingCapacity.get
+    elsif (clg_stages.size == 3) && coil_cooling_dx_multi_speed.stages[2].autosizedGrossRatedTotalCoolingCapacity.is_initialized
+      capacity_w = coil_cooling_dx_multi_speed.stages[2].autosizedSpeedRatedTotalCoolingCapacity.get
+    elsif (clg_stages.size == 4) && coil_cooling_dx_multi_speed.stages[3].autosizedGrossRatedTotalCoolingCapacity.is_initialized
+      capacity_w = coil_cooling_dx_multi_speed.stages[3].autosizedGrossRatedTotalCoolingCapacity.get
     else
       OpenStudio.logFree(OpenStudio::Warn, 'openstudio.standards.CoilCoolingDXMultiSpeed', "For #{coil_cooling_dx_multi_speed.name} capacity is not available, cannot apply efficiency standard.")
       successfully_set_all_properties = false
@@ -258,13 +271,25 @@ class Standard
     capacity_btu_per_hr = OpenStudio.convert(capacity_w, 'W', 'Btu/hr').get
     capacity_kbtu_per_hr = OpenStudio.convert(capacity_w, 'W', 'kBtu/hr').get
 
+    # Define database
+    if coil_dx_heat_pump?(coil_cooling_dx_multi_speed)
+      database = standards_data['heat_pumps']
+    else
+      database = standards_data['unitary_acs']
+    end
+
+    # Additional search criteria
+    if (database[0].keys.include?('equipment_type') || ((template == 'NECB2011') || (template == 'NECB2015') || (template == 'NECB2017') || (template == 'NECB2020') || (template == 'BTAPPRE1980') ||
+      (template == 'BTAP1980TO2010'))) && !coil_dx_heat_pump?(coil_cooling_dx_multi_speed)
+      search_criteria['equipment_type'] = 'Air Conditioners'
+    end
+    if database[0].keys.include?('region')
+      search_criteria['region'] = nil # non-nil values are currently used for residential products
+    end
+
     # Lookup efficiencies depending on whether it is a unitary AC or a heat pump
     ac_props = nil
-    ac_props = if coil_dx_heat_pump?(coil_cooling_dx_multi_speed)
-                 model_find_object(standards_data['heat_pumps'], search_criteria, capacity_btu_per_hr, Date.today)
-               else
-                 model_find_object(standards_data['unitary_acs'], search_criteria, capacity_btu_per_hr, Date.today)
-               end
+    ac_props = model_find_object(database, search_criteria, capacity_btu_per_hr, Date.today)
 
     # Get the minimum efficiency standards
     cop = nil
@@ -274,10 +299,18 @@ class Standard
       min_seer = ac_props['minimum_seasonal_energy_efficiency_ratio']
       cop = seer_to_cop_no_fan(min_seer)
       new_comp_name = "#{coil_cooling_dx_multi_speed.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{min_seer}SEER"
-      #      self.setName("#{self.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{min_seer}SEER")
       OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.CoilCoolingDXMultiSpeed', "For #{template}: #{coil_cooling_dx_multi_speed.name}: #{cooling_type} #{heating_type} #{coil_dx_subcategory(coil_cooling_dx_multi_speed)} Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; SEER = #{min_seer}")
     end
 
+    # If specified as SEER2
+    # TODO: assumed to be the same as SEER for now
+    unless ac_props['minimum_seasonal_energy_efficiency_ratio_2'].nil?
+      min_seer = ac_props['minimum_seasonal_energy_efficiency_ratio_2']
+      cop = seer_to_cop_no_fan(min_seer)
+      new_comp_name = "#{coil_cooling_dx_multi_speed.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{min_seer}SEER"
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.CoilCoolingDXTwoSpeed', "For #{template}: #{coil_cooling_dx_multi_speed.name}: #{cooling_type} #{heating_type} #{coil_dx_subcategory(coil_cooling_dx_multi_speed)} Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; SEER = #{min_seer}")
+    end
+
     # If specified as EER
     unless ac_props['minimum_energy_efficiency_ratio'].nil?
       min_eer = ac_props['minimum_energy_efficiency_ratio']
@@ -286,12 +319,28 @@ class Standard
       OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.CoilCoolingDXMultiSpeed', "For #{template}: #{coil_cooling_dx_multi_speed.name}: #{cooling_type} #{heating_type} #{coil_dx_subcategory(coil_cooling_dx_multi_speed)} Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; EER = #{min_eer}")
     end
 
+    # If specified as EER2
+    # TODO: assumed to be the same as EER for now
+    unless ac_props['minimum_energy_efficiency_ratio_2'].nil?
+      min_eer = ac_props['minimum_energy_efficiency_ratio_2']
+      cop = eer_to_cop_no_fan(min_eer)
+      new_comp_name = "#{coil_cooling_dx_multi_speed.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{min_eer}EER"
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.CoilCoolingDXTwoSpeed', "For #{template}: #{coil_cooling_dx_multi_speed.name}: #{cooling_type} #{heating_type} #{coil_dx_subcategory(coil_cooling_dx_multi_speed)} Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; EER = #{min_eer}")
+    end
+
+    # If specific as IEER
+    if !ac_props['minimum_integrated_energy_efficiency_ratio'].nil? && cop.nil?
+      min_ieer = ac_props['minimum_integrated_energy_efficiency_ratio']
+      cop = ieer_to_cop_no_fan(min_ieer)
+      new_comp_name = "#{coil_cooling_dx_multi_speed.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{min_ieer}IEER"
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.CoilCoolingDXTwoSpeed', "For #{template}: #{coil_cooling_dx_multi_speed.name}: #{cooling_type} #{heating_type} #{sub_category} Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; IEER = #{min_ieer}")
+    end
+
     # if specified as SEER (heat pump)
     unless ac_props['minimum_seasonal_efficiency'].nil?
       min_seer = ac_props['minimum_seasonal_efficiency']
       cop = seer_to_cop_no_fan(min_seer)
       new_comp_name = "#{coil_cooling_dx_multi_speed.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{min_seer}SEER"
-      #      self.setName("#{self.name} #{capacity_kbtu_per_hr.round}kBtu/hr #{min_seer}SEER")
       OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.CoilCoolingDXMultiSpeed', "For #{template}: #{coil_cooling_dx_multi_speed.name}: #{cooling_type} #{heating_type} #{coil_dx_subcategory(coil_cooling_dx_multi_speed)} Capacity = #{capacity_kbtu_per_hr.round}kBtu/hr; SEER = #{min_seer}")
     end