openstudio-standards 0.3.0 → 0.3.1.rc1

data/lib/openstudio-standards/hvac_sizing/Siz.ControllerWaterCoil.rb

@@ -1,49 +0,0 @@
-
-# open the class to add methods to return sizing values
-class OpenStudio::Model::ControllerWaterCoil
-
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.ControllerWaterCoil", ".autosize not yet implemented for #{self.iddObject.type.valueDescription}.")
-  end
-
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-
-    # Only attempt to retrieve sizes for water coil controllers
-    # that have their sensor nodes set.  Water coils without sensor
-    # nodes aren't controlling anything.
-    if self.sensorNode.is_initialized
-  
-      maximum_actuated_flow = self.autosizedMaximumActuatedFlow
-      if maximum_actuated_flow.is_initialized
-        self.setMaximumActuatedFlow(maximum_actuated_flow.get) 
-      end
-
-      controller_convergence_tolerance = self.autosizedControllerConvergenceTolerance
-      if controller_convergence_tolerance.is_initialized
-        self.setControllerConvergenceTolerance(controller_convergence_tolerance.get) 
-      end
-    
-    end
-    
-  end
-
-  # returns the autosized maximum actuated flow rate as an optional double
-  def autosizedMaximumActuatedFlow
-
-    return self.model.getAutosizedValue(self, 'Maximum Actuated Flow', 'm3/s')
-    
-  end
-  
-  # returns the autosized controller convergence tolerance as an optional double
-  def autosizedControllerConvergenceTolerance
-
-    return self.model.getAutosizedValue(self, 'Controller Convergence Tolerance', '')
-
-  end
-  
-  
-end

data/lib/openstudio-standards/hvac_sizing/Siz.CoolingTowerSingleSpeed.rb

@@ -1,90 +0,0 @@
-
-# open the class to add methods to return sizing values
-class OpenStudio::Model::CoolingTowerSingleSpeed
-
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.CoolingTowerSingleSpeed", ".autosize not yet implemented for #{self.iddObject.type.valueDescription}.")
-  end
-
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-
-    design_water_flow_rate = self.autosizedDesignWaterFlowRate
-    if design_water_flow_rate.is_initialized
-      self.setDesignWaterFlowRate(design_water_flow_rate.get) 
-    end
-
-    fan_power_at_design_air_flow_rate = self.autosizedFanPoweratDesignAirFlowRate
-    if fan_power_at_design_air_flow_rate.is_initialized
-      self.setFanPoweratDesignAirFlowRate(fan_power_at_design_air_flow_rate.get) 
-    end
-
-    design_air_flow_rate = self.autosizedDesignAirFlowRate
-    if design_air_flow_rate.is_initialized
-      self.setDesignAirFlowRate(design_air_flow_rate.get) 
-    end
-
-    u_factor_times_area_value_at_design_air_flow_rate = self.autosizedUFactorTimesAreaValueatDesignAirFlowRate
-    if u_factor_times_area_value_at_design_air_flow_rate.is_initialized
-      self.setUFactorTimesAreaValueatDesignAirFlowRate(u_factor_times_area_value_at_design_air_flow_rate.get) 
-    end
-
-    air_flow_rate_in_free_convection_regime = self.autosizedAirFlowRateinFreeConvectionRegime
-    if air_flow_rate_in_free_convection_regime.is_initialized
-      self.setAirFlowRateinFreeConvectionRegime(air_flow_rate_in_free_convection_regime.get) 
-    end
-
-    u_factor_times_area_value_at_free_convection_air_flow_rate = self.autosizedUFactorTimesAreaValueatFreeConvectionAirFlowRate
-    if u_factor_times_area_value_at_free_convection_air_flow_rate.is_initialized
-      self.setUFactorTimesAreaValueatFreeConvectionAirFlowRate(u_factor_times_area_value_at_free_convection_air_flow_rate.get) 
-    end
-    
-  end
-
-  # returns the autosized design water flow rate as an optional double
-  def autosizedDesignWaterFlowRate
-
-    return self.model.getAutosizedValue(self, 'Design Water Flow Rate', 'm3/s')
-
-  end
-  
-  # returns the autosized fan power at design air flow rate as an optional double
-  def autosizedFanPoweratDesignAirFlowRate
-
-    return self.model.getAutosizedValue(self, 'Fan Power at Design Air Flow Rate', 'W')
-    
-  end
-  
-  # returns the autosized reference design air flow rate as an optional double
-  def autosizedDesignAirFlowRate
-
-    return self.model.getAutosizedValue(self, 'Design Air Flow Rate', 'm3/s')
-    
-  end
-  
-  # returns the autosized u-factor times area value at design air flow rate as an optional double
-  def autosizedUFactorTimesAreaValueatDesignAirFlowRate
-
-    return self.model.getAutosizedValue(self, 'U-Factor Times Area Value at Design Air Flow Rate', 'W/C')
-
-  end
-  
-  # returns the autosized air flow rate in free convection regime as an optional double
-  def autosizedAirFlowRateinFreeConvectionRegime
-
-    return self.model.getAutosizedValue(self, 'Free Convection Regime Air Flow Rate', 'm3/s')
-
-  end
-  
-  # returns the autosized u-factor times area value in free convection as an optional double
-  def autosizedUFactorTimesAreaValueatFreeConvectionAirFlowRate
-
-    return self.model.getAutosizedValue(self, 'Free Convection U-Factor Times Area Value', 'W/K')
-    
-  end
-    
-  
-end

data/lib/openstudio-standards/hvac_sizing/Siz.CoolingTowerTwoSpeed.rb

@@ -1,83 +0,0 @@
-
-# open the class to add methods to return sizing values
-class OpenStudio::Model::CoolingTowerTwoSpeed
-
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.CoolingTowerTwoSpeed", ".autosize not yet implemented for #{self.iddObject.type.valueDescription}.")
-  end
-
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.CoolingTowerTwoSpeed", ".applySizingValues not yet implemented for #{self.iddObject.type.valueDescription}.")
-    
-  end
-
-  # returns the autosized design water flow rate as an optional double
-  def autosizedDesignWaterFlowRate
-
-    return self.model.getAutosizedValue(self, 'Design Water Flow Rate', 'm3/s')
-
-  end
-  
-  # returns the autosized fan power at high speed as an optional double
-  def autosizedHighFanSpeedFanPower
-
-    return self.model.getAutosizedValue(self, 'Fan Power at High Fan Speed', 'W')
-    
-  end
-  
-  # returns the autosized reference design air flow rate as an optional double
-  def autosizedHighFanSpeedAirFlowRate
-
-    return self.model.getAutosizedValue(self, 'Air Flow Rate at High Fan Speed', 'm3/s')
-    
-  end
-  
-  # returns the autosized u-factor times area value at high speed as an optional double
-  def autosizedHighFanSpeedUFactorTimesAreaValue
-
-    return self.model.getAutosizedValue(self, 'U-Factor Times Area Value at High Fan Speed', 'W/C')
-
-  end
-  
-  # returns the autosized reference low speed air flow rate as an optional double
-  def autosizedLowFanSpeedAirFlowRate
-
-    return self.model.getAutosizedValue(self, 'Low Fan Speed Air Flow Rate', 'm3/s')
-    
-  end  
-  
-  # returns the autosized fan power at low speed as an optional double
-  def autosizedLowFanSpeedFanPower
-
-    return self.model.getAutosizedValue(self, 'Fan Power at Low Fan Speed', 'W')
-    
-  end  
-  
-  # returns the autosized u-factor times area value at design air flow rate as an optional double
-  def autosizedLowFanSpeedUFactorTimesAreaValue
-
-    return self.model.getAutosizedValue(self, 'U-Factor Times Area Value at Low Fan Speed', 'W/K')
-
-  end  
-  
-  # returns the autosized air flow rate in free convection regime as an optional double
-  def autosizedFreeConvectionRegimeAirFlowRate
-
-    return self.model.getAutosizedValue(self, 'Free Convection Regime Air Flow Rate', 'm3/s')
-
-  end
-  
-  # returns the autosized u-factor times area value in free convection as an optional double
-  def autosizedFreeConvectionRegimeUFactorTimesAreaValue
-
-    return self.model.getAutosizedValue(self, 'Free Convection U-Factor Times Area Value', 'W/K')
-    
-  end
-    
-  
-end

data/lib/openstudio-standards/hvac_sizing/Siz.CoolingTowerVariableSpeed.rb

@@ -1,57 +0,0 @@
-
-# open the class to add methods to return sizing values
-class OpenStudio::Model::CoolingTowerVariableSpeed
-
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    
-    self.autosizeDesignWaterFlowRate
-    self.autosizeDesignAirFlowRate
-    self.autosizeDesignFanPower
-
-  end
-
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-
-    rated_water_flow_rate = self.autosizedDesignWaterFlowRate
-    if rated_water_flow_rate.is_initialized
-      self.setDesignWaterFlowRate(rated_water_flow_rate.get) 
-    end 
-
-    rated_air_flow_rate = self.autosizedDesignAirFlowRate
-    if rated_air_flow_rate.is_initialized
-      self.setDesignAirFlowRate(rated_air_flow_rate.get) 
-    end
-
-    rated_fan_power = self.autosizedDesignFanPower
-    if rated_fan_power.is_initialized
-      self.setDesignFanPower(rated_fan_power.get) 
-    end
-    
-  end
-
-  # returns the autosized design water flow rate as an optional double
-  def autosizedDesignWaterFlowRate
-
-    return self.model.getAutosizedValue(self, 'Design Water Flow Rate', 'm3/s')
-    
-  end
-
-  # returns the autosized air flow rate as an optional double
-  def autosizedDesignAirFlowRate
-
-    return self.model.getAutosizedValue(self, 'Design Air Flow Rate', 'm3/s')
-    
-  end
-  
-  # returns the autosized design fan power as an optional double
-  def autosizedDesignFanPower
-
-    return self.model.getAutosizedValue(self, 'Fan Power at Design Air Flow Rate', 'W')
-    
-  end
-  
-end

data/lib/openstudio-standards/hvac_sizing/Siz.DistrictCooling.rb

@@ -1,27 +0,0 @@
-
-# open the class to add methods to return sizing values
-class OpenStudio::Model::DistrictCooling
-
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    self.autosizeNominalCapacity
-  end
-
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-
-    nominal_capacity = self.autosizedMaximumFlowRate
-    if nominal_capacity.is_initialized
-      self.setMaximumFlowRate(nominal_capacity.get)
-    end
-
-  end
-  
-  # returns the autosized maximum flow rate as an optional double
-  def autosizedNominalCapacity
-    return self.model.getAutosizedValue(self, 'Design Size Nominal Capacity', 'W')
-  end
-  
-end

data/lib/openstudio-standards/hvac_sizing/Siz.DistrictHeating.rb

@@ -1,27 +0,0 @@
-
-# open the class to add methods to return sizing values
-class OpenStudio::Model::DistrictHeating
-
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    self.autosizeNominalCapacity
-  end
-
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-
-    nominal_capacity = self.autosizedMaximumFlowRate
-    if nominal_capacity.is_initialized
-      self.setMaximumFlowRate(nominal_capacity.get)
-    end
-
-  end
-  
-  # returns the autosized maximum flow rate as an optional double
-  def autosizedNominalCapacity
-    return self.model.getAutosizedValue(self, 'Design Size Nominal Capacity', 'W')
-  end
-  
-end

data/lib/openstudio-standards/hvac_sizing/Siz.EvaporativeCoolerDirectResearchSpecial.rb

@@ -1,27 +0,0 @@
-
-# open the class to add methods to return sizing values
-class OpenStudio::Model::EvaporativeCoolerDirectResearchSpecial
-
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.EvaporativeCoolerDirectResearchSpecial", ".autosize not yet implemented for #{self.iddObject.type.valueDescription}.")
-  end
-
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.EvaporativeCoolerDirectResearchSpecial", ".applySizingValues not yet implemented for #{self.iddObject.type.valueDescription}.")
-        
-  end
-
-  # returns the autosized design supply air flow rate as an optional double
-  # def autosizedDesignSupplyAirFlowRate
-
-    # return self.model.getAutosizedValue(self, 'Design Supply Air Flow Rate', 'm3/s')
-    
-  # end
-  
-  
-end

data/lib/openstudio-standards/hvac_sizing/Siz.EvaporativeCoolerIndirectResearchSpecial.rb

@@ -1,27 +0,0 @@
-
-# open the class to add methods to return sizing values
-class OpenStudio::Model::EvaporativeCoolerIndirectResearchSpecial
-
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.EvaporativeCoolerIndirectResearchSpecial", ".autosize not yet implemented for #{self.iddObject.type.valueDescription}.")
-  end
-
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.EvaporativeCoolerIndirectResearchSpecial", ".applySizingValues not yet implemented for #{self.iddObject.type.valueDescription}.")
-        
-  end
-
-  # returns the autosized design supply air flow rate as an optional double
-  # def autosizedDesignSupplyAirFlowRate
-
-    # return self.model.getAutosizedValue(self, 'Design Supply Air Flow Rate', 'm3/s')
-    
-  # end
-  
-  
-end

data/lib/openstudio-standards/hvac_sizing/Siz.EvaporativeFluidCoolerSingleSpeed.rb

@@ -1,27 +0,0 @@
-
-# open the class to add methods to return sizing values
-class OpenStudio::Model::EvaporativeFluidCoolerSingleSpeed
-
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.EvaporativeFluidCoolerSingleSpeed", ".autosize not yet implemented for #{self.iddObject.type.valueDescription}.")
-  end
-
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.EvaporativeFluidCoolerSingleSpeed", ".applySizingValues not yet implemented for #{self.iddObject.type.valueDescription}.")
-        
-  end
-
-  # returns the autosized design supply air flow rate as an optional double
-  # def autosizedDesignSupplyAirFlowRate
-
-    # return self.model.getAutosizedValue(self, 'Design Supply Air Flow Rate', 'm3/s')
-    
-  # end
-  
-  
-end

data/lib/openstudio-standards/hvac_sizing/Siz.FanConstantVolume.rb

@@ -1,29 +0,0 @@
-
-# open the class to add methods to return sizing values
-class OpenStudio::Model::FanConstantVolume
-
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.FanConstantVolume", ".autosize not yet implemented for #{self.iddObject.type.valueDescription}.")
-  end
-
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-
-    maximum_flow_rate = self.autosizedMaximumFlowRate
-    if maximum_flow_rate.is_initialized
-      self.setMaximumFlowRate(maximum_flow_rate.get)
-    end
-
-  end
-  
-  # returns the autosized maximum flow rate as an optional double
-  def autosizedMaximumFlowRate
-
-    return self.model.getAutosizedValue(self, 'Design Size Maximum Flow Rate', 'm3/s')
-    
-  end
-
-end

data/lib/openstudio-standards/hvac_sizing/Siz.FanOnOff.rb

@@ -1,27 +0,0 @@
-
-# open the class to add methods to return sizing values
-class OpenStudio::Model::FanOnOff
-
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    self.autosizeMaximumFlowRate
-  end
-
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-
-    maximum_flow_rate = self.autosizedMaximumFlowRate
-    if maximum_flow_rate.is_initialized
-      self.setMaximumFlowRate(maximum_flow_rate.get)
-    end
-
-  end
-  
-  # returns the autosized maximum flow rate as an optional double
-  def autosizedMaximumFlowRate
-    return self.model.getAutosizedValue(self, 'Design Size Maximum Flow Rate', 'm3/s')
-  end
-  
-end

data/lib/openstudio-standards/hvac_sizing/Siz.FanVariableVolume.rb

@@ -1,29 +0,0 @@
-
-# open the class to add methods to return sizing values
-class OpenStudio::Model::FanVariableVolume
-
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.FanVariableVolume", ".autosize not yet implemented for #{self.iddObject.type.valueDescription}.")
-  end
-
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-    
-    maximum_flow_rate = self.autosizedMaximumFlowRate
-    if maximum_flow_rate.is_initialized
-      self.setMaximumFlowRate(maximum_flow_rate.get)
-    end
-    
-  end
-  
-  # returns the autosized maximum flow rate as an optional double
-  def autosizedMaximumFlowRate
-
-    return self.model.getAutosizedValue(self, 'Design Size Maximum Flow Rate', 'm3/s')
-    
-  end
-
-end

data/lib/openstudio-standards/hvac_sizing/Siz.HeaderedPumpsConstantSpeed.rb

@@ -1,55 +0,0 @@
-
-# open the class to add methods to return sizing values
-class OpenStudio::Model::HeaderedPumpsConstantSpeed
-
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    self.autosizeTotalRatedFlowRate
-    self.autosizeRatedPowerConsumption
-  end
-
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-
-    rated_flow_rate = self.autosizedTotalRatedFlowRate
-    if rated_flow_rate.is_initialized
-      self.setTotalRatedFlowRate(rated_flow_rate.get) 
-    end
-
-    rated_power_consumption = self.autosizedRatedPowerConsumption
-    if rated_power_consumption.is_initialized
-      self.setRatedPowerConsumption(rated_power_consumption.get)
-    end
-
-  end
-
-  # returns the autosized rated flow rate as an optional double
-  def autosizedTotalRatedFlowRate
-
-    # In E+ 8.5, (OS 1.10.5 onward) the column name changed
-    col_name = nil
-    if self.model.version < OpenStudio::VersionString.new('1.10.5')
-      col_name = 'Rated Flow Rate'
-    else
-      col_name = 'Design Flow Rate'
-    end
-
-    return self.model.getAutosizedValue(self, col_name, 'm3/s')
-  end
-
-  # returns the autosized rated power consumption as an optional double
-  def autosizedRatedPowerConsumption
-
-    # In E+ 8.5, (OS 1.10.5 onward) the column name changed
-    col_name = nil
-    if self.model.version < OpenStudio::VersionString.new('1.10.5')
-      col_name = 'Rated Power Consumption'
-    else
-      col_name = 'Design Power Consumption'
-    end
-
-    return self.model.getAutosizedValue(self, col_name, 'W')
-  end
-end

data/lib/openstudio-standards/hvac_sizing/Siz.HeaderedPumpsVariableSpeed.rb

@@ -1,55 +0,0 @@
-
-# open the class to add methods to return sizing values
-class OpenStudio::Model::HeaderedPumpsVariableSpeed
-
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    self.autosizeTotalRatedFlowRate
-    self.autosizeRatedPowerConsumption
-  end
-
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-
-    rated_flow_rate = self.autosizedTotalRatedFlowRate
-    if rated_flow_rate.is_initialized
-      self.setTotalRatedFlowRate(rated_flow_rate.get) 
-    end
-
-    rated_power_consumption = self.autosizedRatedPowerConsumption
-    if rated_power_consumption.is_initialized
-      self.setRatedPowerConsumption(rated_power_consumption.get)
-    end
-
-  end
-
-  # returns the autosized rated flow rate as an optional double
-  def autosizedTotalRatedFlowRate
-
-    # In E+ 8.5, (OS 1.10.5 onward) the column name changed
-    col_name = nil
-    if self.model.version < OpenStudio::VersionString.new('1.10.5')
-      col_name = 'Rated Flow Rate'
-    else
-      col_name = 'Design Flow Rate'
-    end
-
-    return self.model.getAutosizedValue(self, col_name, 'm3/s')
-  end
-
-  # returns the autosized rated power consumption as an optional double
-  def autosizedRatedPowerConsumption
-
-    # In E+ 8.5, (OS 1.10.5 onward) the column name changed
-    col_name = nil
-    if self.model.version < OpenStudio::VersionString.new('1.10.5')
-      col_name = 'Rated Power Consumption'
-    else
-      col_name = 'Design Power Consumption'
-    end
-
-    return self.model.getAutosizedValue(self, col_name, 'W')
-  end
-end

data/lib/openstudio-standards/hvac_sizing/Siz.HeatExchangerAirToAirSensibleAndLatent.rb

@@ -1,38 +0,0 @@
-
-# open the class to add methods to return sizing values
-class OpenStudio::Model::HeatExchangerAirToAirSensibleAndLatent
-
-  # Sets all auto-sizeable fields to autosize
-  def autosize
-    OpenStudio::logFree(OpenStudio::Warn, "openstudio.sizing.HeatExchangerAirToAirSensibleAndLatent", ".autosize not yet implemented for #{self.iddObject.type.valueDescription}.")
-  end
-
-  # Takes the values calculated by the EnergyPlus sizing routines
-  # and puts them into this object model in place of the autosized fields.
-  # Must have previously completed a run with sql output for this to work.
-  def applySizingValues
-
-    nominal_supply_air_flow_rate = self.autosizedNominalSupplyAirFlowRate
-    if nominal_supply_air_flow_rate.is_initialized
-      self.setNominalSupplyAirFlowRate(nominal_supply_air_flow_rate.get) 
-    end
-    
-  end
-
-  # returns the autosized nominal supply air flow rate as an optional double
-  def autosizedNominalSupplyAirFlowRate
-
-    # In E+ 8.4, (OS 1.9.3 onward) the variable name changed
-    supply_air_flow_rate_name = nil
-    if self.model.version < OpenStudio::VersionString.new('1.9.3')
-      supply_air_flow_rate_name = 'Nominal Supply Air Flow Rate'
-    else
-      supply_air_flow_rate_name = 'Design Size Nominal Supply Air Flow Rate'
-    end  
-
-    return self.model.getAutosizedValue(self, supply_air_flow_rate_name, 'm3/s')
-    
-  end
-   
-end
-