openstudio-common-measures 0.3.2 → 0.6.0

data/lib/measures/openstudio_results/resources/os_lib_helper_methods.rb

@@ -1,399 +0,0 @@
-# *******************************************************************************
-# OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC.
-# All rights reserved.
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#
-# (1) Redistributions of source code must retain the above copyright notice,
-# this list of conditions and the following disclaimer.
-#
-# (2) Redistributions in binary form must reproduce the above copyright notice,
-# this list of conditions and the following disclaimer in the documentation
-# and/or other materials provided with the distribution.
-#
-# (3) Neither the name of the copyright holder nor the names of any contributors
-# may be used to endorse or promote products derived from this software without
-# specific prior written permission from the respective party.
-#
-# (4) Other than as required in clauses (1) and (2), distributions in any form
-# of modifications or other derivative works may not use the "OpenStudio"
-# trademark, "OS", "os", or any other confusingly similar designation without
-# specific prior written permission from Alliance for Sustainable Energy, LLC.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND ANY CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
-# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER(S), ANY CONTRIBUTORS, THE
-# UNITED STATES GOVERNMENT, OR THE UNITED STATES DEPARTMENT OF ENERGY, NOR ANY OF
-# THEIR EMPLOYEES, BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
-# OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# *******************************************************************************
-
-module OsLib_HelperMethods
-  # populate choice argument from model objects
-  def self.populateChoiceArgFromModelObjects(model, modelObject_args_hash, includeBuilding = nil)
-    # populate choice argument for constructions that are applied to surfaces in the model
-    modelObject_handles = OpenStudio::StringVector.new
-    modelObject_display_names = OpenStudio::StringVector.new
-
-    # looping through sorted hash of constructions
-    modelObject_args_hash.sort.map do |key, value|
-      modelObject_handles << value.handle.to_s
-      modelObject_display_names << key
-    end
-
-    unless includeBuilding.nil?
-      # add building to string vector with space type
-      building = model.getBuilding
-      modelObject_handles << building.handle.to_s
-      modelObject_display_names << includeBuilding
-    end
-
-    result = { 'modelObject_handles' => modelObject_handles, 'modelObject_display_names' => modelObject_display_names }
-    return result
-  end
-
-  # create variables in run from user arguments
-  def self.createRunVariables(runner, model, user_arguments, arguments)
-    result = {}
-
-    error = false
-    # use the built-in error checking
-    unless runner.validateUserArguments(arguments, user_arguments)
-      error = true
-      runner.registerError('Invalid argument values.')
-    end
-
-    user_arguments.each do |argument|
-      # get argument info
-      arg = user_arguments[argument]
-      arg_type = arg.print.lines($/)[1]
-
-      # create argument variable
-      if arg_type.include? 'Double, Required'
-        eval("result[\"#{arg.name}\"] = runner.getDoubleArgumentValue(\"#{arg.name}\", user_arguments)")
-      elsif arg_type.include? 'Integer, Required'
-        eval("result[\"#{arg.name}\"] = runner.getIntegerArgumentValue(\"#{arg.name}\", user_arguments)")
-      elsif arg_type.include? 'String, Required'
-        eval("result[\"#{arg.name}\"] = runner.getStringArgumentValue(\"#{arg.name}\", user_arguments)")
-      elsif arg_type.include? 'Boolean, Required'
-        eval("result[\"#{arg.name}\"] = runner.getBoolArgumentValue(\"#{arg.name}\", user_arguments)")
-      elsif arg_type.include? 'Choice, Required'
-        eval("result[\"#{arg.name}\"] = runner.getStringArgumentValue(\"#{arg.name}\", user_arguments)")
-      else
-        puts 'not setup to handle all argument types yet, or any optional arguments'
-      end
-    end
-
-    if error
-      return false
-    else
-      return result
-    end
-  end
-
-  # check choice argument made from model objects
-  def self.checkChoiceArgFromModelObjects(object, variableName, to_ObjectType, runner, user_arguments)
-    apply_to_building = false
-    modelObject = nil
-    if object.empty?
-      handle = runner.getStringArgumentValue(variableName, user_arguments)
-      if handle.empty?
-        runner.registerError("No #{variableName} was chosen.") # this logic makes this not work on an optional model object argument
-      else
-        runner.registerError("The selected #{variableName} with handle '#{handle}' was not found in the model. It may have been removed by another measure.")
-      end
-      return false
-    else
-      if !eval("object.get.#{to_ObjectType}").empty?
-        modelObject = eval("object.get.#{to_ObjectType}").get
-      elsif !object.get.to_Building.empty?
-        apply_to_building = true
-      else
-        runner.registerError("Script Error - argument not showing up as #{variableName}.")
-        return false
-      end
-    end
-
-    result = { 'modelObject' => modelObject, 'apply_to_building' => apply_to_building }
-  end
-
-  # check choice argument made from model objects
-  def self.checkOptionalChoiceArgFromModelObjects(object, variableName, to_ObjectType, runner, user_arguments)
-    apply_to_building = false
-    modelObject = nil
-    if object.empty?
-      handle = runner.getOptionalStringArgumentValue(variableName, user_arguments)
-      if handle.empty?
-        # do nothing, this is a valid option
-        puts 'hello'
-        modelObject = nil
-        apply_to_building = false
-      else
-        runner.registerError("The selected #{variableName} with handle '#{handle}' was not found in the model. It may have been removed by another measure.")
-        return false
-      end
-    else
-      if !eval("object.get.#{to_ObjectType}").empty?
-        modelObject = eval("object.get.#{to_ObjectType}").get
-      elsif !object.get.to_Building.empty?
-        apply_to_building = true
-      else
-        runner.registerError("Script Error - argument not showing up as #{variableName}.")
-        return false
-      end
-    end
-
-    result = { 'modelObject' => modelObject, 'apply_to_building' => apply_to_building }
-  end
-
-  # check value of double arguments
-  def self.checkDoubleAndIntegerArguments(runner, user_arguments, arg_check_hash)
-    error = false
-
-    # get hash values
-    min = arg_check_hash['min']
-    max = arg_check_hash['max']
-    min_eq_bool = arg_check_hash['min_eq_bool']
-    max_eq_bool = arg_check_hash['max_eq_bool']
-
-    arg_check_hash['arg_array'].each do |argument|
-      argument = user_arguments[argument]
-
-      # get arg values
-      arg_value = nil
-      if argument.hasValue
-        arg_value = argument.valueDisplayName.to_f # instead of valueAsDouble so it allows integer arguments as well
-      elsif argument.hasDefaultValue
-        arg_value = argument.defaultValueDisplayName.to_f
-      end
-      arg_display = argument.displayName
-
-      unless min.nil?
-        if min_eq_bool
-          if arg_value < min
-            runner.registerError("Please enter value greater than or equal to #{min} for #{arg_display}.") # add in argument display name
-            error = true
-          end
-        else
-          if arg_value <= min
-            runner.registerError("Please enter value greater than #{min} for #{arg_display}.") # add in argument display name
-            error = true
-          end
-        end
-      end
-      unless max.nil?
-        if max_eq_bool
-          if arg_value > max
-            runner.registerError("Please enter value less than or equal to #{max} for #{arg_display}.") # add in argument display name
-            error = true
-          end
-        else
-          if arg_value >= max
-            runner.registerError("Please enter value less than #{max} for #{arg_display}.") # add in argument display name
-            error = true
-          end
-        end
-      end
-    end
-
-    # check for any errors
-    if error
-      return false
-    else
-      return true
-    end
-  end
-
-  # open channel to log info/warning/error messages
-  def self.setup_log_msgs(runner, debug = false)
-    # Open a channel to log info/warning/error messages
-    @msg_log = OpenStudio::StringStreamLogSink.new
-    if debug
-      @msg_log.setLogLevel(OpenStudio::Debug)
-    else
-      @msg_log.setLogLevel(OpenStudio::Info)
-    end
-    @start_time = Time.new
-    @runner = runner
-  end
-
-  # Get all the log messages and put into output
-  # for users to see.
-  def self.log_msgs
-    @msg_log.logMessages.each do |msg|
-      # DLM: you can filter on log channel here for now
-      if /openstudio.*/.match(msg.logChannel) # /openstudio\.model\..*/
-        # Skip certain messages that are irrelevant/misleading
-        next if msg.logMessage.include?('Skipping layer') || # Annoying/bogus "Skipping layer" warnings
-                msg.logChannel.include?('runmanager') || # RunManager messages
-                msg.logChannel.include?('setFileExtension') || # .ddy extension unexpected
-                msg.logChannel.include?('Translator') || # Forward translator and geometry translator
-                msg.logMessage.include?('UseWeatherFile') # 'UseWeatherFile' is not yet a supported option for YearDescription
-
-        # Report the message in the correct way
-        if msg.logLevel == OpenStudio::Info
-          @runner.registerInfo(msg.logMessage)
-        elsif msg.logLevel == OpenStudio::Warn
-          @runner.registerWarning("[#{msg.logChannel}] #{msg.logMessage}")
-        elsif msg.logLevel == OpenStudio::Error
-          @runner.registerError("[#{msg.logChannel}] #{msg.logMessage}")
-        elsif msg.logLevel == OpenStudio::Debug && @debug
-          @runner.registerInfo("DEBUG - #{msg.logMessage}")
-        end
-      end
-    end
-    @runner.registerInfo("Total Time = #{(Time.new - @start_time).round}sec.")
-  end
-
-  def self.check_upstream_measure_for_arg(runner, arg_name)
-    # 2.x methods (currently setup for measure display name but snake_case arg names)
-    arg_name_value = {}
-    runner.workflow.workflowSteps.each do |step|
-      if step.to_MeasureStep.is_initialized
-        measure_step = step.to_MeasureStep.get
-
-        measure_name = measure_step.measureDirName
-        if measure_step.name.is_initialized
-          measure_name = measure_step.name.get # this is instance name in PAT
-        end
-        if measure_step.result.is_initialized
-          result = measure_step.result.get
-          result.stepValues.each do |arg|
-            name = arg.name
-            value = arg.valueAsVariant.to_s
-            if name == arg_name
-              arg_name_value[:value] = value
-              arg_name_value[:measure_name] = measure_name
-              return arg_name_value # stop after find first one
-            end
-          end
-        else
-          # puts "No result for #{measure_name}"
-        end
-      else
-        # puts "This step is not a measure"
-      end
-    end
-
-    return arg_name_value
-  end
-
-  # populate choice argument from model objects. areaType should be string like "floorArea" or "exteriorArea"
-  # note: it seems like spaceType.floorArea does account for multiplier, so I don't have to call this method unless I have a custom collection of spaces.
-  def self.getAreaOfSpacesInArray(model, spaceArray, areaType = 'floorArea')
-    # find selected floor spaces, make array and get floor area.
-    totalArea = 0
-    spaceAreaHash = {}
-    spaceArray.each do |space|
-      spaceArea = eval("space.#{areaType}*space.multiplier")
-      spaceAreaHash[space] = spaceArea
-      totalArea += spaceArea
-    end
-
-    result = { 'totalArea' => totalArea, 'spaceAreaHash' => spaceAreaHash }
-    return result
-  end
-
-  # runs conversion and neat string, and returns value with units in string, optionally before or after the value
-  def self.neatConvertWithUnitDisplay(double, fromString, toString, digits, unitBefore = false, unitAfter = true, space = true, parentheses = true)
-    # convert units
-    doubleConverted = OpenStudio.convert(double, fromString, toString)
-    if !doubleConverted.nil?
-      doubleConverted = doubleConverted.get
-    else
-      puts "Couldn't convert values, check string choices passed in. From: #{fromString}, To: #{toString}"
-    end
-
-    # get neat version of converted
-    neatConverted = OpenStudio.toNeatString(doubleConverted, digits, true)
-
-    # add prefix
-    if unitBefore
-      if space == true && parentheses == true
-        prefix = "(#{toString}) "
-      elsif space == true && parentheses == false
-        prefix = "(#{toString})"
-      elsif space == false && parentheses == true
-        prefix = "#{toString} "
-      else
-        prefix = toString.to_s
-      end
-    else
-      prefix = ''
-    end
-
-    # add suffix
-    if unitAfter
-      if space == true && parentheses == true
-        suffix = " (#{toString})"
-      elsif space == true && parentheses == false
-        suffix = "(#{toString})"
-      elsif space == false && parentheses == true
-        suffix = " #{toString}"
-      else
-        suffix = toString.to_s
-      end
-    else
-      suffix = ''
-    end
-
-    finalString = "#{prefix}#{neatConverted}#{suffix}"
-
-    return finalString
-  end
-
-  # helper that loops through lifecycle costs getting total costs under "Construction" and add to counter if occurs during year 0
-  def self.getTotalCostForObjects(objectArray, category = 'Construction', onlyYearFromStartZero = true)
-    counter = 0
-    objectArray.each do |object|
-      object_LCCs = object.lifeCycleCosts
-      object_LCCs.each do |object_LCC|
-        if object_LCC.category == category
-          if onlyYearFromStartZero == false || object_LCC.yearsFromStart == 0
-            counter += object_LCC.totalCost
-          end
-        end
-      end
-    end
-
-    return counter
-  end
-
-  # helper that loops through lifecycle costs getting total costs under "Construction" and add to counter if occurs during year 0
-  def self.getSpaceTypeStandardsInformation(spaceTypeArray)
-    # hash of space types
-    spaceTypeStandardsInfoHash = {}
-
-    spaceTypeArray.each do |spaceType|
-      # get standards building
-      if !spaceType.standardsBuildingType.empty?
-        standardsBuilding = spaceType.standardsBuildingType.get
-      else
-        standardsBuilding = nil
-      end
-
-      # get standards space type
-      if !spaceType.standardsSpaceType.empty?
-        standardsSpaceType = spaceType.standardsSpaceType.get
-      else
-        standardsSpaceType = nil
-      end
-
-      # populate hash
-      spaceTypeStandardsInfoHash[spaceType] = [standardsBuilding, standardsSpaceType]
-    end
-
-    return spaceTypeStandardsInfoHash
-  end
-
-  # OpenStudio has built in toNeatString method
-  # OpenStudio::toNeatString(double,2,true)# double,decimals, show commas
-
-  # OpenStudio has built in helper for unit conversion. That can be done using OpenStudio::convert() as shown below.
-  # OpenStudio::convert(double,"from unit string","to unit string").get
-end