openstudio-common-measures 0.3.2 → 0.6.0

data/lib/measures/generic_qaqc/measure.rb

@@ -1,5 +1,5 @@
 # *******************************************************************************
-# OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC.
+# OpenStudio(R), Copyright (c) 2008-2021, Alliance for Sustainable Energy, LLC.
 # All rights reserved.
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
@@ -37,6 +37,12 @@ require 'erb'
 require 'json'
 require 'openstudio-standards'
 
+# load OpenStudio measure libraries from openstudio-extension gem
+require 'openstudio-extension'
+require 'openstudio/extension/core/os_lib_schedules'
+require 'openstudio/extension/core/os_lib_helper_methods'
+require 'openstudio/extension/core/os_lib_model_generation.rb'
+
 # require all .rb files in resources folder
 Dir[File.dirname(__FILE__) + '/resources/*.rb'].each { |file| require file }
 
@@ -44,6 +50,9 @@ Dir[File.dirname(__FILE__) + '/resources/*.rb'].each { |file| require file }
 class GenericQAQC < OpenStudio::Measure::ReportingMeasure
   # all QAQC checks should be in OsLib_QAQC module
   include OsLib_QAQC
+  include OsLib_HelperMethods
+  include OsLib_ModelGeneration
+
   # OsLib_CreateResults is needed for utility EDA programs but not the generic QAQC measure
   # include OsLib_CreateResults
 
@@ -84,6 +93,7 @@ class GenericQAQC < OpenStudio::Measure::ReportingMeasure
 
     # gather inputs for check_mech_sys_capacity. Each option has a target value, min and max fractional tolerance, and units
     # in the future climate zone specific targets may be in standards
+    # todo - expose these tollerances as user arguments
     options_check_mech_sys_capacity = {}
     options_check_mech_sys_capacity['chiller_max_flow_rate'] = { 'target' => 2.4, 'min' => 0.1, 'max' => 0.1, 'units' => 'gal/ton*min' }
     options_check_mech_sys_capacity['air_loop_max_flow_rate'] = { 'target' => 1.0, 'min' => 0.1, 'max' => 0.1, 'units' => 'cfm/ft^2' }
@@ -112,14 +122,7 @@ class GenericQAQC < OpenStudio::Measure::ReportingMeasure
     args = OpenStudio::Measure::OSArgumentVector.new
 
     # Make an argument for the template
-    template_chs = OpenStudio::StringVector.new
-    template_chs << 'DOE Ref Pre-1980'
-    template_chs << 'DOE Ref 1980-2004'
-    template_chs << '90.1-2004'
-    template_chs << '90.1-2007'
-    template_chs << '90.1-2010'
-    template_chs << '90.1-2013'
-    template = OpenStudio::Measure::OSArgument.makeChoiceArgument('template', template_chs, true)
+    template = OpenStudio::Measure::OSArgument.makeChoiceArgument('template', get_doe_templates(false), true)
     template.setDisplayName('Target ASHRAE Standard')
     template.setDescription('This used to set the target standard for most checks.')
     template.setDefaultValue('90.1-2013') # there is override variable in run method for this
@@ -179,6 +182,13 @@ class GenericQAQC < OpenStudio::Measure::ReportingMeasure
       end
     end
 
+    # make an argument for use_upstream_args
+    use_upstream_args = OpenStudio::Measure::OSArgument.makeBoolArgument('use_upstream_args', true)
+    use_upstream_args.setDisplayName('Use Upstream Argument Values')
+    use_upstream_args.setDescription('When true this will look for arguments or registerValues in upstream measures that match arguments from this measure, and will use the value from the upstream measure in place of what is entered for this measure.')
+    use_upstream_args.setDefaultValue(true)
+    args << use_upstream_args
+
     return args
   end # end the arguments method
 
@@ -262,32 +272,32 @@ class GenericQAQC < OpenStudio::Measure::ReportingMeasure
     # used for edapt programs to populate xml file with extra data
     # report_elems << create_results
 
-    # utility name to to used by some qaqc checks
-    @utility_name = nil # for utility QAQC string is passed in
-    default_target_standard = args['template'] # for utility QAQC this is hard coded, for generic it is user argument
-
-    # for large scale analysis may want to infer this from building name so it will be in sync with template variables from earlier measures
-    override_template_arg = false
-    if override_template_arg
-      template_chs = []
-      template_chs << 'DOE Ref Pre-1980'
-      template_chs << 'DOE Ref 1980-2004'
-      template_chs << '90.1-2004'
-      template_chs << '90.1-2007'
-      template_chs << '90.1-2010'
-      template_chs << '90.1-2013'
-      # map standard
-      template_chs.each do |template_ch|
-        if @model.getBuilding.name.to_s.include?(template_ch)
-          default_target_standard = template_ch
-          if template_ch != args['template']
-            runner.registerInfo("override_template_arg is true. Ignoring user argument of #{args['template']} and instead using #{template_ch}.")
+    # lookup and replace argument values from upstream measures
+    if args['use_upstream_args'] == true
+      args.each do |arg, value|
+        next if arg == 'use_upstream_args' # this argument should not be changed
+        value_from_osw = OsLib_HelperMethods.check_upstream_measure_for_arg(runner, arg)
+        if !value_from_osw.empty?
+          runner.registerInfo("Replacing argument named #{arg} from current measure with a value of #{value_from_osw[:value]} from #{value_from_osw[:measure_name]}.")
+          new_val = value_from_osw[:value]
+          # TODO: - make code to handle non strings more robust. check_upstream_measure_for_arg coudl pass bakc the argument type
+          if arg == 'total_bldg_floor_area'
+            args[arg] = new_val.to_f
+          elsif arg == 'num_stories_above_grade'
+            args[arg] = new_val.to_f
+          elsif arg == 'zipcode'
+            args[arg] = new_val.to_i
+          else
+            args[arg] = new_val
           end
-          break
         end
       end
     end
 
+    # utility name to to used by some qaqc checks
+    @utility_name = nil # for utility QAQC string is passed in
+    default_target_standard = args['template'] # for utility QAQC this is hard coded, for generic it is user argument
+
     # get building type, different standards path if multifamily
     building_type = ''
     if @model.getBuilding.standardsBuildingType.is_initialized

data/lib/measures/generic_qaqc/measure.xml

@@ -3,8 +3,8 @@
   <schema_version>3.0</schema_version>
   <name>generic_qaqc</name>
   <uid>d58d6b29-69ba-4915-b907-3c2c37ddb7c7</uid>
-  <version_id>0adab61f-9365-42cd-b6ab-ce548fafff91</version_id>
-  <version_modified>20201001T054735Z</version_modified>
+  <version_id>8f162fe1-b120-4d78-861a-1089ee150751</version_id>
+  <version_modified>20220506T153448Z</version_modified>
   <xml_checksum>0A3BF61C</xml_checksum>
   <class_name>GenericQAQC</class_name>
   <display_name>Generic QAQC</display_name>
@@ -44,12 +44,44 @@
           <value>90.1-2013</value>
           <display_name>90.1-2013</display_name>
         </choice>
+        <choice>
+          <value>90.1-2016</value>
+          <display_name>90.1-2016</display_name>
+        </choice>
+        <choice>
+          <value>90.1-2019</value>
+          <display_name>90.1-2019</display_name>
+        </choice>
+        <choice>
+          <value>ComStock DOE Ref Pre-1980</value>
+          <display_name>ComStock DOE Ref Pre-1980</display_name>
+        </choice>
+        <choice>
+          <value>ComStock DOE Ref 1980-2004</value>
+          <display_name>ComStock DOE Ref 1980-2004</display_name>
+        </choice>
+        <choice>
+          <value>ComStock 90.1-2004</value>
+          <display_name>ComStock 90.1-2004</display_name>
+        </choice>
+        <choice>
+          <value>ComStock 90.1-2007</value>
+          <display_name>ComStock 90.1-2007</display_name>
+        </choice>
+        <choice>
+          <value>ComStock 90.1-2010</value>
+          <display_name>ComStock 90.1-2010</display_name>
+        </choice>
+        <choice>
+          <value>ComStock 90.1-2013</value>
+          <display_name>ComStock 90.1-2013</display_name>
+        </choice>
       </choices>
     </argument>
     <argument>
       <name>check_eui_reasonableness</name>
       <display_name>EUI Reasonableness (General)</display_name>
-      <description>Check EUI for model against selected ASHRAE standard DOE prototype buildings.</description>
+      <description>Check model EUI against selected ASHRAE standard DOE prototype building.</description>
       <type>Boolean</type>
       <required>true</required>
       <model_dependent>false</model_dependent>
@@ -77,7 +109,7 @@
     <argument>
       <name>check_eui_by_end_use</name>
       <display_name>End Use by Category (General)</display_name>
-      <description>Check end use by category against selected ASHRAE standard DOE prototype buildings.</description>
+      <description>Check model consumption by end use against selected ASHRAE standard DOE prototype building.</description>
       <type>Boolean</type>
       <required>true</required>
       <model_dependent>false</model_dependent>
@@ -180,7 +212,7 @@
     <argument>
       <name>check_internal_loads</name>
       <display_name>Internal Loads (Baseline)</display_name>
-      <description>Check LPD, ventilation rates, occupant density, plug loads, and equipment loads against selected ASHRAE standard and DOE Prototype buildings.</description>
+      <description>Check LPD, ventilation rates, occupant density, plug loads, and equipment loads against selected ASHRAE standard DOE Prototype buildings.</description>
       <type>Boolean</type>
       <required>true</required>
       <model_dependent>false</model_dependent>
@@ -319,7 +351,7 @@
     </argument>
     <argument>
       <name>check_mech_sys_type</name>
-      <display_name>Mechanical System Type (Baseline)</display_name>
+      <display_name>Baseline Mechanical System Type (Baseline)</display_name>
       <description>Check against ASHRAE 90.1. Infers the baseline system type based on the equipment serving the zone and their heating/cooling fuels. Only does a high-level inference; does not look for the presence/absence of required controls, etc.</description>
       <type>Boolean</type>
       <required>true</required>
@@ -364,6 +396,25 @@
       <model_dependent>false</model_dependent>
       <default_value>0.5</default_value>
     </argument>
+    <argument>
+      <name>use_upstream_args</name>
+      <display_name>Use Upstream Argument Values</display_name>
+      <description>When true this will look for arguments or registerValues in upstream measures that match arguments from this measure, and will use the value from the upstream measure in place of what is entered for this measure.</description>
+      <type>Boolean</type>
+      <required>true</required>
+      <model_dependent>false</model_dependent>
+      <default_value>true</default_value>
+      <choices>
+        <choice>
+          <value>true</value>
+          <display_name>true</display_name>
+        </choice>
+        <choice>
+          <value>false</value>
+          <display_name>false</display_name>
+        </choice>
+      </choices>
+    </argument>
   </arguments>
   <outputs />
   <provenances />
@@ -437,24 +488,12 @@
       <usage_type>resource</usage_type>
       <checksum>779C47A4</checksum>
     </file>
-    <file>
-      <filename>README.md.erb</filename>
-      <filetype>erb</filetype>
-      <usage_type>readmeerb</usage_type>
-      <checksum>703C9964</checksum>
-    </file>
     <file>
       <filename>BasicOfficeTest.osm</filename>
       <filetype>osm</filetype>
       <usage_type>test</usage_type>
       <checksum>75942985</checksum>
     </file>
-    <file>
-      <filename>MidRiseApt.osm</filename>
-      <filetype>osm</filetype>
-      <usage_type>test</usage_type>
-      <checksum>146619F3</checksum>
-    </file>
     <file>
       <filename>BasicOfficeTest_Mueller_altHVAC_a.osm</filename>
       <filetype>osm</filetype>
@@ -489,198 +528,252 @@
       <filename>LICENSE.md</filename>
       <filetype>md</filetype>
       <usage_type>license</usage_type>
-      <checksum>E0468DD6</checksum>
-    </file>
-    <file>
-      <filename>check_mech_sys_type.rb</filename>
-      <filetype>rb</filetype>
-      <usage_type>resource</usage_type>
-      <checksum>DB7A676B</checksum>
+      <checksum>A21A3ED2</checksum>
     </file>
     <file>
       <filename>check_plant_cap.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>62BF8146</checksum>
+      <checksum>5808A837</checksum>
     </file>
     <file>
       <filename>check_part_loads.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>ABAE0E33</checksum>
+      <checksum>C56D1570</checksum>
     </file>
     <file>
       <filename>check_fan_pwr.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>54705290</checksum>
+      <checksum>F32BF92B</checksum>
     </file>
     <file>
-      <filename>check_supply_air_and_thermostat_temp_difference.rb</filename>
+      <filename>check_placeholder.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>0F3C61BC</checksum>
+      <checksum>C9561EBD</checksum>
     </file>
     <file>
-      <filename>check_placeholder.rb</filename>
+      <filename>check_plenum_loads.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>A46F04B4</checksum>
+      <checksum>46981891</checksum>
     </file>
     <file>
-      <filename>check_mech_sys_part_load_eff.rb</filename>
+      <filename>check_sch_coord.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>B830417E</checksum>
+      <checksum>B17FFC25</checksum>
     </file>
     <file>
-      <filename>check_plenum_loads.rb</filename>
+      <filename>check_air_sys_temps.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>B6BCB01D</checksum>
+      <checksum>C76C4A0C</checksum>
     </file>
     <file>
-      <filename>os_lib_reporting_qaqc.rb</filename>
+      <filename>check_plant_temps.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>54A730F4</checksum>
+      <checksum>A659EBCD</checksum>
     </file>
     <file>
-      <filename>check_schedules.rb</filename>
+      <filename>check_pump_pwr.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>11D5DF87</checksum>
+      <checksum>4B6EC8EA</checksum>
     </file>
     <file>
-      <filename>os_lib_helper_methods.rb</filename>
+      <filename>check_weather_files.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>07B01D67</checksum>
+      <checksum>85CA2E26</checksum>
     </file>
     <file>
-      <filename>check_simultaneous_heating_and_cooling.rb</filename>
+      <filename>check_calibration.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>D7AE5189</checksum>
+      <checksum>8D1854A4</checksum>
     </file>
     <file>
-      <filename>check_sch_coord.rb</filename>
+      <filename>CreateResults.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>ED20C054</checksum>
+      <checksum>D38441F3</checksum>
     </file>
     <file>
-      <filename>check_eui_reasonableness.rb</filename>
+      <filename>README.md.erb</filename>
+      <filetype>erb</filetype>
+      <usage_type>readmeerb</usage_type>
+      <checksum>3AFCE991</checksum>
+    </file>
+    <file>
+      <filename>generic_qaqc_summary.jpg</filename>
+      <filetype>jpg</filetype>
+      <usage_type>doc</usage_type>
+      <checksum>45ABEE68</checksum>
+    </file>
+    <file>
+      <filename>generic_qaqc_detailed.jpg</filename>
+      <filetype>jpg</filetype>
+      <usage_type>doc</usage_type>
+      <checksum>92EA3F5C</checksum>
+    </file>
+    <file>
+      <version>
+        <software_program>OpenStudio</software_program>
+        <identifier>2.0.0</identifier>
+        <min_compatible>3.1.0</min_compatible>
+      </version>
+      <filename>measure.rb</filename>
       <filetype>rb</filetype>
-      <usage_type>resource</usage_type>
-      <checksum>CB7DDC0B</checksum>
+      <usage_type>script</usage_type>
+      <checksum>9482E15C</checksum>
     </file>
     <file>
-      <filename>check_internal_loads.rb</filename>
+      <filename>fsr.osm</filename>
+      <filetype>osm</filetype>
+      <usage_type>test</usage_type>
+      <checksum>D2A4E538</checksum>
+    </file>
+    <file>
+      <filename>uo_blend.osm</filename>
+      <filetype>osm</filetype>
+      <usage_type>test</usage_type>
+      <checksum>605CDF17</checksum>
+    </file>
+    <file>
+      <filename>uo_strip_mall.osm</filename>
+      <filetype>osm</filetype>
+      <usage_type>test</usage_type>
+      <checksum>95EBB09E</checksum>
+    </file>
+    <file>
+      <filename>uo_lg_hotel.osm</filename>
+      <filetype>osm</filetype>
+      <usage_type>test</usage_type>
+      <checksum>B8033381</checksum>
+    </file>
+    <file>
+      <filename>USA_NY_Buffalo-Greater.Buffalo.Intl.AP.725280_TMY3.epw</filename>
+      <filetype>epw</filetype>
+      <usage_type>test</usage_type>
+      <checksum>6B50E0FF</checksum>
+    </file>
+    <file>
+      <filename>uo_mixed.osm</filename>
+      <filetype>osm</filetype>
+      <usage_type>test</usage_type>
+      <checksum>1874C555</checksum>
+    </file>
+    <file>
+      <filename>check_mech_sys_type.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>09DC3552</checksum>
+      <checksum>2B4C8CB1</checksum>
     </file>
     <file>
-      <filename>check_domestic_hot_water.rb</filename>
+      <filename>check_supply_air_and_thermostat_temp_difference.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>9BE27A55</checksum>
+      <checksum>245963C6</checksum>
     </file>
     <file>
-      <filename>check_air_sys_temps.rb</filename>
+      <filename>check_simultaneous_heating_and_cooling.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>980FD951</checksum>
+      <checksum>FAEFC26D</checksum>
     </file>
     <file>
       <filename>check_cond_zns.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>2B3D8E08</checksum>
+      <checksum>35AF3348</checksum>
     </file>
     <file>
       <filename>check_mech_sys_capacity.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>8A55DBAB</checksum>
+      <checksum>D4C11C12</checksum>
     </file>
     <file>
-      <filename>check_plant_temps.rb</filename>
+      <filename>check_mech_sys_efficiency.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>BB36639F</checksum>
+      <checksum>5239DDEA</checksum>
     </file>
     <file>
-      <filename>check_pump_pwr.rb</filename>
+      <filename>check_schedules.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>E3D75A8F</checksum>
+      <checksum>4381DA3F</checksum>
     </file>
     <file>
-      <filename>check_weather_files.rb</filename>
+      <filename>check_internal_loads.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>688B721D</checksum>
+      <checksum>8770A7D0</checksum>
     </file>
     <file>
-      <filename>check_calibration.rb</filename>
+      <filename>check_domestic_hot_water.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>ED3D70DA</checksum>
+      <checksum>43606255</checksum>
     </file>
     <file>
-      <filename>check_mech_sys_efficiency.rb</filename>
+      <filename>check_mech_sys_part_load_eff.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>F47A1139</checksum>
+      <checksum>87A54A27</checksum>
     </file>
     <file>
-      <filename>CreateResults.rb</filename>
+      <filename>os_lib_reporting_qaqc.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>33AF0943</checksum>
+      <checksum>579D7C6B</checksum>
     </file>
     <file>
-      <filename>measure_Test.rb</filename>
+      <filename>check_eui_reasonableness.rb</filename>
       <filetype>rb</filetype>
-      <usage_type>test</usage_type>
-      <checksum>8FBCE04A</checksum>
+      <usage_type>resource</usage_type>
+      <checksum>E6A6A3EB</checksum>
     </file>
     <file>
-      <version>
-        <software_program>OpenStudio</software_program>
-        <identifier>2.0.0</identifier>
-        <min_compatible>2.0.0</min_compatible>
-      </version>
-      <filename>measure.rb</filename>
+      <filename>check_eui_by_end_use.rb</filename>
       <filetype>rb</filetype>
-      <usage_type>script</usage_type>
-      <checksum>A998285D</checksum>
+      <usage_type>resource</usage_type>
+      <checksum>3CB3F8D4</checksum>
     </file>
     <file>
       <filename>README.md</filename>
       <filetype>md</filetype>
       <usage_type>readme</usage_type>
-      <checksum>BBC2D3D5</checksum>
+      <checksum>11DDEADA</checksum>
     </file>
     <file>
-      <filename>report.html.erb</filename>
-      <filetype>erb</filetype>
-      <usage_type>resource</usage_type>
-      <checksum>AD451814</checksum>
+      <filename>measure_Test.rb</filename>
+      <filetype>rb</filetype>
+      <usage_type>test</usage_type>
+      <checksum>EA00F910</checksum>
     </file>
     <file>
-      <filename>check_eui_by_end_use.rb</filename>
-      <filetype>rb</filetype>
-      <usage_type>resource</usage_type>
-      <checksum>504C5330</checksum>
+      <filename>MidRiseApt.osm</filename>
+      <filetype>osm</filetype>
+      <usage_type>test</usage_type>
+      <checksum>8316418F</checksum>
     </file>
     <file>
       <filename>check_envelope_conductance.rb</filename>
       <filetype>rb</filetype>
       <usage_type>resource</usage_type>
-      <checksum>7814F60A</checksum>
+      <checksum>3346FDCD</checksum>
+    </file>
+    <file>
+      <filename>report.html.erb</filename>
+      <filetype>erb</filetype>
+      <usage_type>resource</usage_type>
+      <checksum>6F54D1FE</checksum>
     </file>
   </files>
 </measure>

data/lib/measures/generic_qaqc/resources/CreateResults.rb

@@ -1,5 +1,5 @@
 # *******************************************************************************
-# OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC.
+# OpenStudio(R), Copyright (c) 2008-2021, Alliance for Sustainable Energy, LLC.
 # All rights reserved.
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:

data/lib/measures/generic_qaqc/resources/check_air_sys_temps.rb

@@ -1,5 +1,5 @@
 # *******************************************************************************
-# OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC.
+# OpenStudio(R), Copyright (c) 2008-2021, Alliance for Sustainable Energy, LLC.
 # All rights reserved.
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:

data/lib/measures/generic_qaqc/resources/check_calibration.rb

@@ -1,5 +1,5 @@
 # *******************************************************************************
-# OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC.
+# OpenStudio(R), Copyright (c) 2008-2021, Alliance for Sustainable Energy, LLC.
 # All rights reserved.
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:

data/lib/measures/generic_qaqc/resources/check_cond_zns.rb

@@ -1,5 +1,5 @@
 # *******************************************************************************
-# OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC.
+# OpenStudio(R), Copyright (c) 2008-2021, Alliance for Sustainable Energy, LLC.
 # All rights reserved.
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are met:
@@ -41,7 +41,9 @@ module OsLib_QAQC
     check_elems << OpenStudio::Attribute.new('name', 'Conditioned Zones')
     check_elems << OpenStudio::Attribute.new('category', category)
     check_elems << OpenStudio::Attribute.new('description', 'Check that all zones with people have thermostats.')
-
+    check_elems << OpenStudio::Attribute.new('min_pass', "#{(min_pass * 100).round(0)}")
+    check_elems << OpenStudio::Attribute.new('max_pass', "#{(max_pass * 100).round(0)}")
+    
     # stop here if only name is requested this is used to populate display name for arguments
     if name_only == true
       results = []