openstudio-calibration 0.1.2

data/lib/measures/CoilHeatingGasPercentChange/LICENSE.md

@@ -0,0 +1,27 @@
+OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without modification, are permitted 
+provided that the following conditions are met:
+
+(1) Redistributions of source code must retain the above copyright notice, this list of conditions 
+and the following disclaimer.
+
+(2) Redistributions in binary form must reproduce the above copyright notice, this list of conditions
+and the following disclaimer in the documentation and/or other materials provided with the distribution.
+
+(3) Neither the name of the copyright holder nor the names of any contributors may be used to endorse 
+or promote products derived from this software without specific prior written permission from the 
+respective party.
+
+(4) Other than as required in clauses (1) and (2), distributions in any form of modifications or other 
+derivative works may not use the "OpenStudio" trademark, "OS", "os", or any other confusingly similar 
+designation without specific prior written permission from Alliance for Sustainable Energy, LLC.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED 
+WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
+PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER, THE UNITED STATES GOVERNMENT, 
+OR ANY CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 
+OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

data/lib/measures/CoilHeatingGasPercentChange/README.md

@@ -0,0 +1,64 @@
+
+
+###### (Automatically generated documentation)
+
+# Heating Coils Gas Percent Change
+
+## Description
+This is a general purpose measure to calibrate Gas Heating Coils with a Percent Change.
+
+## Modeler Description
+It will be used for calibration of rated capacity and efficiency and parasitic loads. User can choose between a SINGLE coil or ALL the Coils.
+
+## Measure Type
+ModelMeasure
+
+## Taxonomy
+
+
+## Arguments
+
+
+### Apply the Measure to a SINGLE Gas Heating Coil, ALL the Gas Heating Coils or NONE.
+
+**Name:** coil,
+**Type:** Choice,
+**Units:** ,
+**Required:** true,
+**Model Dependent:** false
+
+### Percent Change for coil Efficiency.
+Percent Change for coil Efficiency.
+**Name:** coil_efficiency_perc_change,
+**Type:** Double,
+**Units:** ,
+**Required:** true,
+**Model Dependent:** false
+
+### Percent Change for coil Capacity.
+Percent Change for coil Capacity.
+**Name:** coil_capacity_perc_change,
+**Type:** Double,
+**Units:** ,
+**Required:** true,
+**Model Dependent:** false
+
+### Percent Change for coil parasitic electric load.
+Percent Change for coil parasitic electric load.
+**Name:** coil_parasitic_electric_perc_change,
+**Type:** Double,
+**Units:** ,
+**Required:** true,
+**Model Dependent:** false
+
+### Percent Change for coil parasitic gas load.
+Percent Change for coil parasitic gas load.
+**Name:** coil_parasitic_gas_perc_change,
+**Type:** Double,
+**Units:** ,
+**Required:** true,
+**Model Dependent:** false
+
+
+
+

data/lib/measures/CoilHeatingGasPercentChange/README.md.erb

@@ -0,0 +1,42 @@
+<%#= README.md.erb is used to auto-generate README.md. %>
+<%#= To manually maintain README.md throw away README.md.erb and manually edit README.md %>
+###### (Automatically generated documentation)
+
+# <%= name %>
+
+## Description
+<%= description %>
+
+## Modeler Description
+<%= modelerDescription %>
+
+## Measure Type
+<%= measureType %>
+
+## Taxonomy
+<%= taxonomy %>
+
+## Arguments
+
+<% arguments.each do |argument| %>
+### <%= argument[:display_name] %>
+<%= argument[:description] %>
+**Name:** <%= argument[:name] %>,
+**Type:** <%= argument[:type] %>,
+**Units:** <%= argument[:units] %>,
+**Required:** <%= argument[:required] %>,
+**Model Dependent:** <%= argument[:model_dependent] %>
+<% end %>
+
+<% if arguments.size == 0 %>
+<%= "This measure does not have any user arguments" %>
+<% end %>
+
+<% if outputs.size > 0 %>
+## Outputs
+<% output_names = [] %>
+<% outputs.each do |output| %>
+<% output_names << output[:display_name] %>
+<% end %>
+<%= output_names.join(", ") %>
+<% end %>

data/lib/measures/CoilHeatingGasPercentChange/measure.rb

@@ -0,0 +1,271 @@
+# *******************************************************************************
+# OpenStudio(R), Copyright (c) 2008-2020, Alliance for Sustainable Energy, LLC.
+# All rights reserved.
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#
+# (1) Redistributions of source code must retain the above copyright notice,
+# this list of conditions and the following disclaimer.
+#
+# (2) Redistributions in binary form must reproduce the above copyright notice,
+# this list of conditions and the following disclaimer in the documentation
+# and/or other materials provided with the distribution.
+#
+# (3) Neither the name of the copyright holder nor the names of any contributors
+# may be used to endorse or promote products derived from this software without
+# specific prior written permission from the respective party.
+#
+# (4) Other than as required in clauses (1) and (2), distributions in any form
+# of modifications or other derivative works may not use the "OpenStudio"
+# trademark, "OS", "os", or any other confusingly similar designation without
+# specific prior written permission from Alliance for Sustainable Energy, LLC.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND ANY CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+# THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER(S), ANY CONTRIBUTORS, THE
+# UNITED STATES GOVERNMENT, OR THE UNITED STATES DEPARTMENT OF ENERGY, NOR ANY OF
+# THEIR EMPLOYEES, BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+# OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# *******************************************************************************
+
+# start the measure
+class CoilHeatingGasPercentChange < OpenStudio::Measure::ModelMeasure
+  # human readable name
+  def name
+    'Heating Coils Gas Percent Change'
+  end
+
+  # human readable description
+  def description
+    'This is a general purpose measure to calibrate Gas Heating Coils with a Percent Change.'
+  end
+
+  # human readable description of modeling approach
+  def modeler_description
+    'It will be used for calibration of rated capacity and efficiency and parasitic loads. User can choose between a SINGLE coil or ALL the Coils.'
+  end
+
+  def change_name(object, coil_parasitic_gas_perc_change, coil_efficiency_perc_change, coil_parasitic_electric_perc_change, coil_capacity_perc_change)
+    nameString = object.name.get.to_s
+    if coil_parasitic_gas_perc_change != 1.0
+      nameString += " #{coil_parasitic_gas_perc_change.round(2)}percng gasPara"
+    end
+    if coil_parasitic_electric_perc_change != 1.0
+      nameString += " #{coil_parasitic_electric_perc_change.round(2)}percng elecPara"
+    end
+    if coil_efficiency_perc_change != 1.0
+      nameString += " #{coil_efficiency_perc_change.round(2)}percng coilEff"
+    end
+    if coil_capacity_perc_change != 1.0
+      nameString += " #{coil_capacity_perc_change.round(2)}percng coilCap"
+    end
+    object.setName(nameString)
+  end
+
+  # define the arguments that the user will input
+  def arguments(model)
+    args = OpenStudio::Measure::OSArgumentVector.new
+
+    # populate choice argument for constructions that are applied to surfaces in the model
+    loop_handles = OpenStudio::StringVector.new
+    loop_display_names = OpenStudio::StringVector.new
+
+    # putting air loops and names into hash
+    loop_args = model.getAirLoopHVACs
+    loop_args_hash = {}
+    loop_args.each do |loop_arg|
+      loop_args_hash[loop_arg.name.to_s] = loop_arg
+    end
+
+    # looping through sorted hash of air loops
+    loop_args_hash.sort.map do |_key, value|
+      show_loop = false
+      components = value.supplyComponents
+      components.each do |component|
+        next if component.to_CoilHeatingGas.empty?
+        show_loop = true
+        loop_handles << component.handle.to_s
+        loop_display_names << component.name.to_s
+      end
+
+      # if loop as object of correct type then add to hash.
+      # if show_loop == true
+      # loop_handles << value.handle.to_s
+      # loop_display_names << key
+      # end
+    end
+
+    # add building to string vector with space type
+    building = model.getBuilding
+    loop_handles << building.handle.to_s
+    loop_display_names << '*All Gas Heating Coils*'
+    loop_handles << '0'
+    loop_display_names << '*None*'
+
+    # make a choice argument for space type
+    coil_arg = OpenStudio::Measure::OSArgument.makeChoiceArgument('coil', loop_handles, loop_display_names)
+    coil_arg.setDisplayName('Apply the Measure to a SINGLE Gas Heating Coil, ALL the Gas Heating Coils or NONE.')
+    coil_arg.setDefaultValue('*All Gas Heating Coils*') # if no space type is chosen this will run on the entire building
+    args << coil_arg
+
+    # coil_efficiency_perc_change
+    coil_efficiency_perc_change = OpenStudio::Measure::OSArgument.makeDoubleArgument('coil_efficiency_perc_change', true)
+    coil_efficiency_perc_change.setDisplayName('Percent Change for coil Efficiency.')
+    coil_efficiency_perc_change.setDescription('Percent Change for coil Efficiency.')
+    coil_efficiency_perc_change.setDefaultValue(0.0)
+    args << coil_efficiency_perc_change
+
+    # coil_capacity_perc_change
+    coil_capacity_perc_change = OpenStudio::Measure::OSArgument.makeDoubleArgument('coil_capacity_perc_change', true)
+    coil_capacity_perc_change.setDisplayName('Percent Change for coil Capacity.')
+    coil_capacity_perc_change.setDescription('Percent Change for coil Capacity.')
+    coil_capacity_perc_change.setDefaultValue(0.0)
+    args << coil_capacity_perc_change
+
+    # coil_parasitic_electric_perc_change
+    coil_parasitic_electric_perc_change = OpenStudio::Measure::OSArgument.makeDoubleArgument('coil_parasitic_electric_perc_change', true)
+    coil_parasitic_electric_perc_change.setDisplayName('Percent Change for coil parasitic electric load.')
+    coil_parasitic_electric_perc_change.setDescription('Percent Change for coil parasitic electric load.')
+    coil_parasitic_electric_perc_change.setDefaultValue(0.0)
+    args << coil_parasitic_electric_perc_change
+
+    # coil_parasitic_gas_perc_change
+    coil_parasitic_gas_perc_change = OpenStudio::Measure::OSArgument.makeDoubleArgument('coil_parasitic_gas_perc_change', true)
+    coil_parasitic_gas_perc_change.setDisplayName('Percent Change for coil parasitic gas load.')
+    coil_parasitic_gas_perc_change.setDescription('Percent Change for coil parasitic gas load.')
+    coil_parasitic_gas_perc_change.setDefaultValue(0.0)
+    args << coil_parasitic_gas_perc_change
+
+    args
+  end
+
+  # define what happens when the measure is run
+  def run(model, runner, user_arguments)
+    super(model, runner, user_arguments)
+
+    # use the built-in error checking
+    unless runner.validateUserArguments(arguments(model), user_arguments)
+      return false
+    end
+
+    # assign the user inputs to variables
+    coil_object = runner.getOptionalWorkspaceObjectChoiceValue('coil', user_arguments, model)
+    coil_handle = runner.getStringArgumentValue('coil', user_arguments)
+
+    coil_capacity_perc_change = runner.getDoubleArgumentValue('coil_capacity_perc_change', user_arguments)
+    coil_efficiency_perc_change = runner.getDoubleArgumentValue('coil_efficiency_perc_change', user_arguments)
+    coil_parasitic_electric_perc_change = runner.getDoubleArgumentValue('coil_parasitic_electric_perc_change', user_arguments)
+    coil_parasitic_gas_perc_change = runner.getDoubleArgumentValue('coil_parasitic_gas_perc_change', user_arguments)
+
+    # find objects to change
+    coils = []
+    building = model.getBuilding
+    building_handle = building.handle.to_s
+    runner.registerInfo("coil_handle: #{coil_handle}")
+    # setup coils
+    if coil_handle == building_handle
+      # Use ALL coils
+      runner.registerInfo('Applying change to ALL Coils')
+      loops = model.getAirLoopHVACs
+      # loop through air loops
+      loops.each do |loop|
+        supply_components = loop.supplyComponents
+        # find coils on loops
+        supply_components.each do |supply_component|
+          unless supply_component.to_CoilHeatingGas.empty?
+            coils << supply_component.to_CoilHeatingGas.get
+          end
+        end
+      end
+    elsif coil_handle == 0.to_s
+      # coils set to NONE so do nothing
+      runner.registerInfo('Applying change to NONE Coils')
+    elsif !coil_handle.empty?
+      # Single coil handle found, check if object is good
+      if !coil_object.get.to_CoilHeatingGas.empty?
+        runner.registerInfo("Applying change to #{coil_object.get.name} coil")
+        coils << coil_object.get.to_CoilHeatingGas.get
+      else
+        runner.registerError("coil with handle #{coil_handle} could not be found.")
+      end
+    else
+      runner.registerError('coil handle is empty.')
+      return false
+    end
+
+    # report initial condition of model
+    runner.registerInitialCondition("Coils to change: #{coils.size}")
+    runner.registerInfo("Coils to change: #{coils.size}")
+    altered_coils = []
+    altered_capacity = []
+    altered_parasiteelectric = []
+    altered_coilefficiency = []
+    altered_parasitegas = []
+    # loop through coils
+    coils.each do |coil|
+      altered_coil = false
+      # coil_capacity_perc_change
+      if coil_capacity_perc_change != 0.0
+        if coil.nominalCapacity.is_initialized
+          runner.registerInfo("Applying nominalCapacity #{coil_capacity_perc_change} Percent Change to #{coil.name.get}.")
+          coil.setNominalCapacity(coil.nominalCapacity.get + coil.nominalCapacity.get * coil_capacity_perc_change * 0.01)
+          altered_capacity << coil.handle.to_s
+          altered_coil = true
+        end
+      end
+
+      # modify coil_efficiency_perc_change
+      if coil_efficiency_perc_change != 0.0
+        runner.registerInfo("Applying gasBurnerEfficiency #{coil_efficiency_perc_change} Percent Change to #{coil.name.get}.")
+        if (coil.gasBurnerEfficiency + coil.gasBurnerEfficiency * coil_efficiency_perc_change * 0.01) <= 1
+          coil.setGasBurnerEfficiency(coil.gasBurnerEfficiency + coil.gasBurnerEfficiency * coil_efficiency_perc_change * 0.01)
+        else
+          coil.setGasBurnerEfficiency(1.0)
+          runner.registerWarning("#{coil_efficiency_perc_change} Percent Change results in Efficiency greater than 1.")
+        end
+        altered_coilefficiency << coil.handle.to_s
+        altered_coil = true
+      end
+
+      # coil_parasitic_electric_perc_change
+      if coil_parasitic_electric_perc_change != 0.0
+        runner.registerInfo("Applying parasiticElectricLoad #{coil_parasitic_electric_perc_change} Percent Change to #{coil.name.get}.")
+        coil.setParasiticElectricLoad(coil.parasiticElectricLoad + coil.parasiticElectricLoad * coil_parasitic_electric_perc_change * 0.01)
+        altered_parasiteelectric << coil.handle.to_s
+        altered_coil = true
+      end
+
+      # coil_parasitic_gas_perc_change
+      if coil_parasitic_gas_perc_change != 0.0
+        runner.registerInfo("Applying parasiticGasLoad #{coil_parasitic_gas_perc_change} Percent Change to #{coil.name.get}.")
+        coil.setParasiticGasLoad(coil.parasiticGasLoad + coil.parasiticGasLoad * coil_parasitic_gas_perc_change * 0.01)
+        altered_parasitegas << coil.handle.to_s
+        altered_coil = true
+      end
+
+      next unless altered_coil
+      altered_coils << coil.handle.to_s
+      change_name(coil, coil_parasitic_gas_perc_change, coil_efficiency_perc_change, coil_parasitic_electric_perc_change, coil_capacity_perc_change)
+      runner.registerInfo("coil name changed to: #{coil.name.get}")
+    end # end coil loop
+
+    # na if nothing in model to look at
+    if altered_coils.empty?
+      runner.registerAsNotApplicable('No Coils were altered in the model')
+      return true
+    end
+
+    # report final condition of model
+    runner.registerFinalCondition("#{altered_coils.size} Coils objects were altered.")
+
+    true
+  end
+end
+
+# register the measure to be used by the application
+CoilHeatingGasPercentChange.new.registerWithApplication

data/lib/measures/CoilHeatingGasPercentChange/measure.xml

@@ -0,0 +1,111 @@
+<measure>
+  <schema_version>3.0</schema_version>
+  <name>coil_heating_gas_percent_change</name>
+  <uid>8589af79-cfe7-45fb-9c79-e7b95e5fb02f</uid>
+  <version_id>3591edb1-4d18-493c-b290-8c6287dd10c1</version_id>
+  <version_modified>20200325T030944Z</version_modified>
+  <xml_checksum>1F3D2430</xml_checksum>
+  <class_name>CoilHeatingGasPercentChange</class_name>
+  <display_name>Heating Coils Gas Percent Change</display_name>
+  <description>This is a general purpose measure to calibrate Gas Heating Coils with a Percent Change.</description>
+  <modeler_description>It will be used for calibration of rated capacity and efficiency and parasitic loads. User can choose between a SINGLE coil or ALL the Coils.</modeler_description>
+  <arguments>
+    <argument>
+      <name>coil</name>
+      <display_name>Apply the Measure to a SINGLE Gas Heating Coil, ALL the Gas Heating Coils or NONE.</display_name>
+      <type>Choice</type>
+      <required>true</required>
+      <model_dependent>false</model_dependent>
+      <default_value>*All Gas Heating Coils*</default_value>
+      <choices>
+        <choice>
+          <value>{a20d912d-d927-4389-a1e6-ac7cde75c769}</value>
+          <display_name>*All Gas Heating Coils*</display_name>
+        </choice>
+        <choice>
+          <value>0</value>
+          <display_name>*None*</display_name>
+        </choice>
+      </choices>
+    </argument>
+    <argument>
+      <name>coil_efficiency_perc_change</name>
+      <display_name>Percent Change for coil Efficiency.</display_name>
+      <description>Percent Change for coil Efficiency.</description>
+      <type>Double</type>
+      <required>true</required>
+      <model_dependent>false</model_dependent>
+      <default_value>0</default_value>
+    </argument>
+    <argument>
+      <name>coil_capacity_perc_change</name>
+      <display_name>Percent Change for coil Capacity.</display_name>
+      <description>Percent Change for coil Capacity.</description>
+      <type>Double</type>
+      <required>true</required>
+      <model_dependent>false</model_dependent>
+      <default_value>0</default_value>
+    </argument>
+    <argument>
+      <name>coil_parasitic_electric_perc_change</name>
+      <display_name>Percent Change for coil parasitic electric load.</display_name>
+      <description>Percent Change for coil parasitic electric load.</description>
+      <type>Double</type>
+      <required>true</required>
+      <model_dependent>false</model_dependent>
+      <default_value>0</default_value>
+    </argument>
+    <argument>
+      <name>coil_parasitic_gas_perc_change</name>
+      <display_name>Percent Change for coil parasitic gas load.</display_name>
+      <description>Percent Change for coil parasitic gas load.</description>
+      <type>Double</type>
+      <required>true</required>
+      <model_dependent>false</model_dependent>
+      <default_value>0</default_value>
+    </argument>
+  </arguments>
+  <outputs/>
+  <provenances/>
+  <tags>
+    <tag>HVAC.Heating</tag>
+  </tags>
+  <attributes>
+    <attribute>
+      <name>Measure Type</name>
+      <value>ModelMeasure</value>
+      <datatype>string</datatype>
+    </attribute>
+  </attributes>
+  <files>
+    <file>
+      <filename>LICENSE.md</filename>
+      <filetype>md</filetype>
+      <usage_type>license</usage_type>
+      <checksum>E0468DD6</checksum>
+    </file>
+    <file>
+      <filename>README.md.erb</filename>
+      <filetype>erb</filetype>
+      <usage_type>readmeerb</usage_type>
+      <checksum>703C9964</checksum>
+    </file>
+    <file>
+      <filename>README.md</filename>
+      <filetype>md</filetype>
+      <usage_type>readme</usage_type>
+      <checksum>92E7D6F3</checksum>
+    </file>
+    <file>
+      <version>
+        <software_program>OpenStudio</software_program>
+        <identifier>2.1.0</identifier>
+        <min_compatible>2.1.0</min_compatible>
+      </version>
+      <filename>measure.rb</filename>
+      <filetype>rb</filetype>
+      <usage_type>script</usage_type>
+      <checksum>925516DE</checksum>
+    </file>
+  </files>
+</measure>