mongo 2.21.0 → 2.21.1

data/spec/spec_tests/data/client_side_operations_timeout/command-execution.yml

@@ -1,250 +0,0 @@
-description: "timeoutMS behaves correctly during command execution"
-
-schemaVersion: "1.9"
-
-runOnRequirements:
-  # The appName filter cannot be used to set a fail point on connection handshakes until server version 4.9 due to
-  # SERVER-49220/SERVER-49336.
-  - minServerVersion: "4.9"
-    # Skip load-balanced and serverless which do not support RTT measurements.
-    topologies: [ single, replicaset, sharded ]
-    serverless: forbid
-
-createEntities:
-  - client:
-      id: &failPointClient failPointClient
-      useMultipleMongoses: false
-
-initialData:
-  # The corresponding entities for the collections defined here are created in test-level createEntities operations.
-  # This is done so that tests can set fail points that will affect all of the handshakes and heartbeats done by a
-  # client. The collection and database names are listed here so that the collections will be dropped and re-created at
-  # the beginning of each test.
-  - collectionName: &regularCollectionName coll
-    databaseName: &databaseName test
-    documents: []
-  - collectionName: &timeoutCollectionName timeoutColl
-    databaseName: &databaseName test
-    documents: []
-
-tests:
-  - description: "maxTimeMS value in the command is less than timeoutMS"
-    operations:
-      # Artificially increase the server RTT to ~50ms.
-      - name: failPoint
-        object: testRunner
-        arguments:
-          client: *failPointClient
-          failPoint:
-            configureFailPoint: failCommand
-            mode: "alwaysOn"
-            data:
-              failCommands: ["hello", "isMaster"]
-              appName: &appName reduceMaxTimeMSTest
-              blockConnection: true
-              blockTimeMS: 50
-      # Create a client with the app name specified in the fail point and timeoutMS higher than blockTimeMS.
-      # Also create database and collection entities derived from the new client.
-      - name: createEntities
-        object: testRunner
-        arguments:
-          entities:
-            - client:
-                id: &client client
-                useMultipleMongoses: false
-                uriOptions:
-                  appName: *appName
-                  w: 1  # Override server's w:majority default to speed up the test.
-                  timeoutMS: 500
-                  heartbeatFrequencyMS: 500
-                observeEvents:
-                  - commandStartedEvent
-            - database:
-                id: &database database
-                client: *client
-                databaseName: *databaseName
-            - collection:
-                id: &timeoutCollection timeoutCollection
-                database: *database
-                collectionName: *timeoutCollectionName
-      # Do an operation with a large timeout to ensure the servers are discovered.
-      - name: insertOne
-        object: *timeoutCollection
-        arguments:
-          document: { _id: 1 }
-          timeoutMS: 100000
-      # Wait until short-circuiting has been enabled (at least 2 RTT measurements).
-      - name: wait
-        object: testRunner
-        arguments:
-          ms: 1000
-      # Do an operation with timeoutCollection so the event will include a maxTimeMS field.
-      - name: insertOne
-        object: *timeoutCollection
-        arguments:
-          document: { _id: 2 }
-    expectEvents:
-      - client: *client
-        events:
-          - commandStartedEvent:
-              commandName: insert
-              databaseName: *databaseName
-              command:
-                insert: *timeoutCollectionName
-          - commandStartedEvent:
-              commandName: insert
-              databaseName: *databaseName
-              command:
-                insert: *timeoutCollectionName
-                maxTimeMS: { $$lte: 450 }
-
-  - description: "command is not sent if RTT is greater than timeoutMS"
-    operations:
-      # Artificially increase the server RTT to ~50ms.
-      - name: failPoint
-        object: testRunner
-        arguments:
-          client: *failPointClient
-          failPoint:
-            configureFailPoint: failCommand
-            mode: "alwaysOn"
-            data:
-              failCommands: ["hello", "isMaster"]
-              appName: &appName rttTooHighTest
-              blockConnection: true
-              blockTimeMS: 50
-      # Create a client with the app name specified in the fail point. Also create database and collection entities
-      # derived from the new client. There is one collection entity with no timeoutMS and another with a timeoutMS
-      # that's lower than the fail point's blockTimeMS value.
-      - name: createEntities
-        object: testRunner
-        arguments:
-          entities:
-            - client:
-                id: &client client
-                useMultipleMongoses: false
-                uriOptions:
-                  appName: *appName
-                  w: 1  # Override server's w:majority default to speed up the test.
-                  timeoutMS: 10
-                  heartbeatFrequencyMS: 500
-                observeEvents:
-                  - commandStartedEvent
-            - database:
-                id: &database database
-                client: *client
-                databaseName: *databaseName
-            - collection:
-                id: &timeoutCollection timeoutCollection
-                database: *database
-                collectionName: *timeoutCollectionName
-      # Do an operation with a large timeout to ensure the servers are discovered.
-      - name: insertOne
-        object: *timeoutCollection
-        arguments:
-          document: { _id: 1 }
-          timeoutMS: 100000
-      # Wait until short-circuiting has been enabled (at least 2 RTT measurements).
-      - name: wait
-        object: testRunner
-        arguments:
-          ms: 1000
-      # Do an operation with timeoutCollection which will error.
-      - name: insertOne
-        object: *timeoutCollection
-        arguments:
-          document: { _id: 2 }
-        expectError:
-          isTimeoutError: true
-      # Do an operation with timeoutCollection which will error.
-      - name: insertOne
-        object: *timeoutCollection
-        arguments:
-          document: { _id: 3 }
-        expectError:
-          isTimeoutError: true
-      # Do an operation with timeoutCollection which will error.
-      - name: insertOne
-        object: *timeoutCollection
-        arguments:
-          document: { _id: 4 }
-        expectError:
-          isTimeoutError: true
-    expectEvents:
-      # There should only be one event, which corresponds to the first
-      # insertOne call. For the subsequent insertOne calls, drivers should
-      # fail client-side.
-      - client: *client
-        events:
-          - commandStartedEvent:
-              commandName: insert
-              databaseName: *databaseName
-              command:
-                insert: *timeoutCollectionName
-
-  - description: "short-circuit is not enabled with only 1 RTT measurement"
-    operations:
-      # Artificially increase the server RTT to ~300ms.
-      - name: failPoint
-        object: testRunner
-        arguments:
-          client: *failPointClient
-          failPoint:
-            configureFailPoint: failCommand
-            mode: "alwaysOn"
-            data:
-              failCommands: ["hello", "isMaster"]
-              appName: &appName reduceMaxTimeMSTest
-              blockConnection: true
-              blockTimeMS: 100
-      # Create a client with the app name specified in the fail point and timeoutMS lower than blockTimeMS.
-      # Also create database and collection entities derived from the new client.
-      - name: createEntities
-        object: testRunner
-        arguments:
-          entities:
-            - client:
-                id: &client client
-                useMultipleMongoses: false
-                uriOptions:
-                  appName: *appName
-                  w: 1  # Override server's w:majority default to speed up the test.
-                  timeoutMS: 90
-                  heartbeatFrequencyMS: 100000  # Override heartbeatFrequencyMS to ensure only 1 RTT is recorded.
-                observeEvents:
-                  - commandStartedEvent
-            - database:
-                id: &database database
-                client: *client
-                databaseName: *databaseName
-            - collection:
-                id: &timeoutCollection timeoutCollection
-                database: *database
-                collectionName: *timeoutCollectionName
-      # Do an operation with a large timeout to ensure the servers are discovered.
-      - name: insertOne
-        object: *timeoutCollection
-        arguments:
-          document: { _id: 1 }
-          timeoutMS: 100000
-      # Do an operation with timeoutCollection which will succeed. If this
-      # fails it indicates the driver mistakenly used the min RTT even though
-      # there has only been one sample.
-      - name: insertOne
-        object: *timeoutCollection
-        arguments:
-          document: { _id: 2 }
-    expectEvents:
-      - client: *client
-        events:
-          - commandStartedEvent:
-              commandName: insert
-              databaseName: *databaseName
-              command:
-                insert: *timeoutCollectionName
-          - commandStartedEvent:
-              commandName: insert
-              databaseName: *databaseName
-              command:
-                insert: *timeoutCollectionName
-                maxTimeMS: { $$lte: 450 }

data/spec/spec_tests/data/client_side_operations_timeout/convenient-transactions.yml

@@ -1,113 +0,0 @@
-description: "timeoutMS behaves correctly for the withTransaction API"
-
-schemaVersion: "1.9"
-
-runOnRequirements:
-  - minServerVersion: "4.4"
-    topologies: ["replicaset", "sharded"]
-
-createEntities:
-  - client:
-      id: &failPointClient failPointClient
-      useMultipleMongoses: false
-  - client:
-      id: &client client
-      uriOptions:
-        timeoutMS: 50
-      useMultipleMongoses: false
-      observeEvents:
-        - commandStartedEvent
-  - database:
-      id: &database database
-      client: *client
-      databaseName: &databaseName test
-  - collection:
-      id: &collection collection
-      database: *database
-      collectionName: &collectionName coll
-  - session:
-      id: &session session
-      client: *client
-
-initialData:
-  - collectionName: *collectionName
-    databaseName: *databaseName
-    documents: []
-
-tests:
-  - description: "withTransaction raises a client-side error if timeoutMS is overridden inside the callback"
-    operations:
-      - name: withTransaction
-        object: *session
-        arguments:
-          callback:
-            - name: insertOne
-              object: *collection
-              arguments:
-                document: { _id: 1 }
-                session: *session
-                timeoutMS: 100
-              expectError:
-                isClientError: true
-    expectEvents:
-      # The only operation run fails with a client-side error, so there should be no events for the client.
-      - client: *client
-        events: []
-
-  - description: "timeoutMS is not refreshed for each operation in the callback"
-    operations:
-      - name: failPoint
-        object: testRunner
-        arguments:
-          client: *failPointClient
-          failPoint:
-            configureFailPoint: failCommand
-            mode: { times: 2 }
-            data:
-              failCommands: ["insert"]
-              blockConnection: true
-              # Was 30, but JRuby was taking too long in preparing and issuing
-              # the operation. We now specify the timeoutMS below, and set this
-              # value to just more than half of it (so that two inserts will
-              # exceed the timeout, but one won't--or shouldn't).
-              blockTimeMS: 51
-      - name: withTransaction
-        object: *session
-        arguments:
-          # Was originally not specified here, inheriting the client value of 50ms.
-          # That wasn't giving JRuby enough time, so we specify a larger value
-          # here.
-          timeoutMS: 100
-          callback:
-            - name: insertOne
-              object: *collection
-              arguments:
-                document: { _id: 1 }
-                session: *session
-            - name: insertOne
-              object: *collection
-              arguments:
-                document: { _id: 2 }
-                session: *session
-              expectError:
-                isTimeoutError: true
-        expectError:
-          isTimeoutError: true
-    expectEvents:
-      - client: *client
-        events:
-          # Because the second insert expects an error and gets an error, it technically succeeds, so withTransaction
-          # will try to run commitTransaction. This will fail client-side, though, because the timeout has already
-          # expired, so no command is sent.
-          - commandStartedEvent:
-              commandName: insert
-              databaseName: *databaseName
-              command:
-                insert: *collectionName
-                maxTimeMS: { $$type: ["int", "long"] }
-          - commandStartedEvent:
-              commandName: insert
-              databaseName: *databaseName
-              command:
-                insert: *collectionName
-                maxTimeMS: { $$type: ["int", "long"] }

data/spec/spec_tests/data/client_side_operations_timeout/cursors.yml

@@ -1,70 +0,0 @@
-description: "tests for timeoutMS behavior that applies to all cursor types"
-
-schemaVersion: "1.0"
-
-createEntities:
-  - client:
-      id: &client client
-  - database:
-      id: &database database
-      client: *client
-      databaseName: &databaseName test
-  - collection:
-      id: &collection collection
-      database: *database
-      collectionName: &collectionName coll
-
-initialData:
-  - collectionName: *collectionName
-    databaseName: *databaseName
-    documents: []
-
-tests:
-  - description: "find errors if timeoutMode is set and timeoutMS is not"
-    operations:
-      - name: find
-        object: *collection
-        arguments:
-          filter: {}
-          timeoutMode: cursorLifetime
-        expectError:
-          isClientError: true
-
-  - description: "collection aggregate errors if timeoutMode is set and timeoutMS is not"
-    operations:
-      - name: aggregate
-        object: *collection
-        arguments:
-          pipeline: []
-          timeoutMode: cursorLifetime
-        expectError:
-          isClientError: true
-
-  - description: "database aggregate errors if timeoutMode is set and timeoutMS is not"
-    operations:
-      - name: aggregate
-        object: *database
-        arguments:
-          pipeline: []
-          timeoutMode: cursorLifetime
-        expectError:
-          isClientError: true
-
-  - description: "listCollections errors if timeoutMode is set and timeoutMS is not"
-    operations:
-      - name: listCollections
-        object: *database
-        arguments:
-          filter: {}
-          timeoutMode: cursorLifetime
-        expectError:
-          isClientError: true
-
-  - description: "listIndexes errors if timeoutMode is set and timeoutMS is not"
-    operations:
-      - name: listIndexes
-        object: *collection
-        arguments:
-          timeoutMode: cursorLifetime
-        expectError:
-          isClientError: true