mongo 2.21.0 → 2.21.1

data/spec/spec_tests/data/client_side_operations_timeout/change-streams.yml

@@ -1,358 +0,0 @@
-description: "timeoutMS behaves correctly for change streams"
-
-schemaVersion: "1.9"
-
-runOnRequirements:
-  - minServerVersion: "4.4"
-    topologies: ["replicaset", "sharded"]
-
-createEntities:
-  - client:
-      id: &failPointClient failPointClient
-      useMultipleMongoses: false
-  - client:
-      id: &client client
-      useMultipleMongoses: false
-      observeEvents:
-        - commandStartedEvent
-      # Drivers are not required to execute killCursors during resume attempts, so it should be ignored for command
-      # monitoring assertions.
-      ignoreCommandMonitoringEvents: ["killCursors"]
-  - database:
-      id: &database database
-      client: *client
-      databaseName: &databaseName test
-  - collection:
-      id: &collection collection
-      database: *database
-      collectionName: &collectionName coll
-
-initialData:
-  - collectionName: *collectionName
-    databaseName: *databaseName
-    documents: []
-
-tests:
-  - description: "error if maxAwaitTimeMS is greater than timeoutMS"
-    operations:
-      - name: createChangeStream
-        object: *collection
-        arguments:
-          pipeline: []
-          timeoutMS: 5
-          maxAwaitTimeMS: 10
-        expectError:
-          isClientError: true
-
-  - description: "error if maxAwaitTimeMS is equal to timeoutMS"
-    operations:
-      - name: createChangeStream
-        object: *collection
-        arguments:
-          pipeline: []
-          timeoutMS: 5
-          maxAwaitTimeMS: 5
-        expectError:
-          isClientError: true
-
-  - description: "timeoutMS applied to initial aggregate"
-    operations:
-      - name: failPoint
-        object: testRunner
-        arguments:
-          client: *failPointClient
-          failPoint:
-            configureFailPoint: failCommand
-            mode: { times: 1 }
-            data:
-              failCommands: ["aggregate"]
-              blockConnection: true
-              blockTimeMS: 55
-      - name: createChangeStream
-        object: *collection
-        arguments:
-          pipeline: []
-          timeoutMS: 50
-        expectError:
-          isTimeoutError: true
-    expectEvents:
-      - client: *client
-        events:
-          - commandStartedEvent:
-              commandName: aggregate
-              databaseName: *databaseName
-              command:
-                aggregate: *collectionName
-                maxTimeMS: { $$type: ["int", "long"] }
-
-  # If maxAwaitTimeMS is not set, timeoutMS should be refreshed for the getMore and the getMore should not have a
-  # maxTimeMS field. This test requires a high timeout because the server applies a default 1000ms maxAwaitTime. To
-  # ensure that the driver is refreshing the timeout between commands, the test blocks aggregate and getMore commands
-  # for 30ms each and creates/iterates a change stream with timeoutMS=1050. The initial aggregate will block for 30ms
-  # and the getMore will block for 1030ms.
-  - description: "timeoutMS is refreshed for getMore if maxAwaitTimeMS is not set"
-    operations:
-      - name: failPoint
-        object: testRunner
-        arguments:
-          client: *failPointClient
-          failPoint:
-            configureFailPoint: failCommand
-            mode: { times: 2 }
-            data:
-              failCommands: ["aggregate", "getMore"]
-              blockConnection: true
-              blockTimeMS: 30
-      - name: createChangeStream
-        object: *collection
-        arguments:
-          pipeline: []
-          timeoutMS: 1050
-        saveResultAsEntity: &changeStream changeStream
-      - name: iterateOnce
-        object: *changeStream
-    expectEvents:
-      - client: *client
-        events:
-          - commandStartedEvent:
-              commandName: aggregate
-              databaseName: *databaseName
-              command:
-                aggregate: *collectionName
-                maxTimeMS: { $$type: ["int", "long"] }
-          - commandStartedEvent:
-              commandName: getMore
-              databaseName: *databaseName
-              command:
-                getMore: { $$type: ["int", "long"] }
-                collection: *collectionName
-                maxTimeMS: { $$exists: false }
-
-  # If maxAwaitTimeMS is set, timeoutMS should still be refreshed for the getMore and the getMore command should have a
-  # maxTimeMS field.
-  - description: "timeoutMS is refreshed for getMore if maxAwaitTimeMS is set"
-    operations:
-      - name: failPoint
-        object: testRunner
-        arguments:
-          client: *failPointClient
-          failPoint:
-            configureFailPoint: failCommand
-            mode: { times: 2 }
-            data:
-              failCommands: ["aggregate", "getMore"]
-              blockConnection: true
-              # was 15, changed to 30 to account for jruby driver latency.
-              blockTimeMS: 30
-      - name: createChangeStream
-        object: *collection
-        arguments:
-          pipeline: []
-          # was 20, changed to 29 to account for native ruby driver latency.
-          # Changed again to 59 to account for additional jruby driver latency.
-          # The idea for this test is that each operation is delayed by 15ms
-          # (by failpoint). the timeout for each operation is set to (originally)
-          # 20ms, because if timeoutMS was not refreshed for getMore, it would timeout.
-          # However, we're tickling the 20ms timeout because the driver itself
-          # is taking more than 5ms to do its thing.
-          #
-          # Changing the blockTimeMS in the failpoint to 30ms, and then bumping
-          # the timeout to almost twice that (59ms) should give us the same
-          # effect in the test.
-          timeoutMS: 59
-          batchSize: 2
-          maxAwaitTimeMS: 1
-        saveResultAsEntity: &changeStream changeStream
-      - name: iterateOnce
-        object: *changeStream
-    expectEvents:
-      - client: *client
-        events:
-          - commandStartedEvent:
-              commandName: aggregate
-              databaseName: *databaseName
-              command:
-                aggregate: *collectionName
-                maxTimeMS: { $$type: ["int", "long"] }
-          - commandStartedEvent:
-              commandName: getMore
-              databaseName: *databaseName
-              command:
-                getMore: { $$type: ["int", "long"] }
-                collection: *collectionName
-                maxTimeMS: 1
-
-  # The timeout should be applied to the entire resume attempt, not individually to each command. The test creates a
-  # change stream with timeoutMS=20 which returns an empty initial batch and then sets a fail point to block both
-  # getMore and aggregate for 12ms each and fail with a resumable error. When the resume attempt happens, the getMore
-  # and aggregate block for longer than 20ms total, so it times out.
-  - description: "timeoutMS applies to full resume attempt in a next call"
-    operations:
-      - name: createChangeStream
-        object: *collection
-        arguments:
-          pipeline: []
-          # Originally set to 20, but the Ruby driver was too-often taking
-          # that much time, and causing the timing of the test to fail. Instead,
-          # bumped the timout to 23ms, which is just less than twice the
-          # blockTimeMS for the failpoint. It still failed on jruby, so the
-          # timeout (and blockTimeMS) were drastically increased to accomodate
-          # JRuby. This tests the same thing, but gives the driver a bit more
-          # breathing space.
-          timeoutMS: 99
-        saveResultAsEntity: &changeStream changeStream
-      - name: failPoint
-        object: testRunner
-        arguments:
-          client: *failPointClient
-          failPoint:
-            configureFailPoint: failCommand
-            mode: { times: 2 }
-            data:
-              failCommands: ["getMore", "aggregate"]
-              blockConnection: true
-              # Originally 12, bumped it to 50 to give the jruby driver a bit
-              # more breathing room.
-              blockTimeMS: 50
-              errorCode: 7 # HostNotFound - resumable but does not require an SDAM state change.
-              # failCommand doesn't correctly add the ResumableChangeStreamError by default. It needs to be specified
-              # manually here so the error is considered resumable. The failGetMoreAfterCursorCheckout fail point
-              # would add the label without this, but it does not support blockConnection functionality.
-              errorLabels: ["ResumableChangeStreamError"]
-      - name: iterateUntilDocumentOrError
-        object: *changeStream
-        expectError:
-          isTimeoutError: true
-    expectEvents:
-      - client: *client
-        events:
-          - commandStartedEvent:
-              commandName: aggregate
-              databaseName: *databaseName
-              command:
-                aggregate: *collectionName
-                maxTimeMS: { $$type: ["int", "long"] }
-          - commandStartedEvent:
-              commandName: getMore
-              databaseName: *databaseName
-              command:
-                getMore: { $$type: ["int", "long"] }
-                collection: *collectionName
-                maxTimeMS: { $$exists: false }
-          - commandStartedEvent:
-              commandName: aggregate
-              databaseName: *databaseName
-              command:
-                aggregate: *collectionName
-                maxTimeMS: { $$type: ["int", "long"] }
-
-  - description: "change stream can be iterated again if previous iteration times out"
-    operations:
-      - name: createChangeStream
-        object: *collection
-        arguments:
-          pipeline: []
-          # Specify a short maxAwaitTimeMS because otherwise the getMore on the new cursor will wait for 1000ms and
-          # time out.
-          maxAwaitTimeMS: 1
-          timeoutMS: 100
-        saveResultAsEntity: &changeStream changeStream
-      # Block getMore for 150ms to force the next() call to time out.
-      - name: failPoint
-        object: testRunner
-        arguments:
-          client: *failPointClient
-          failPoint:
-            configureFailPoint: failCommand
-            mode: { times: 1 }
-            data:
-              failCommands: ["getMore"]
-              blockConnection: true
-              blockTimeMS: 150
-      # The original aggregate didn't return any events so this should do a getMore and return a timeout error.
-      - name: iterateUntilDocumentOrError
-        object: *changeStream
-        expectError:
-          isTimeoutError: true
-      # The previous iteration attempt timed out so this should re-create the change stream. We use iterateOnce rather
-      # than iterateUntilDocumentOrError because there haven't been any events and we only want to assert that the
-      # cursor was re-created.
-      - name: iterateOnce
-        object: *changeStream
-    expectEvents:
-      - client: *client
-        events:
-          - commandStartedEvent:
-              commandName: aggregate
-              databaseName: *databaseName
-              command:
-                aggregate: *collectionName
-                maxTimeMS: { $$type: ["int", "long"] }
-          # The iterateUntilDocumentOrError operation should send a getMore.
-          - commandStartedEvent:
-              commandName: getMore
-              databaseName: *databaseName
-              command:
-                getMore: { $$type: ["int", "long"] }
-                collection: *collectionName
-          # The iterateOnce operation should re-create the cursor via an aggregate and then send a getMore to iterate
-          # the new cursor.
-          - commandStartedEvent:
-              commandName: aggregate
-              databaseName: *databaseName
-              command:
-                aggregate: *collectionName
-                maxTimeMS: { $$type: ["int", "long"] }
-          - commandStartedEvent:
-              commandName: getMore
-              databaseName: *databaseName
-              command:
-                getMore: { $$type: ["int", "long"] }
-                collection: *collectionName
-
-  # The timeoutMS value should be refreshed for getMore's. This is a failure test. The createChangeStream operation
-  # sets timeoutMS=10 and the getMore blocks for 15ms, causing iteration to fail with a timeout error.
-  - description: "timeoutMS is refreshed for getMore - failure"
-    operations:
-      - name: failPoint
-        object: testRunner
-        arguments:
-          client: *failPointClient
-          failPoint:
-            configureFailPoint: failCommand
-            mode: { times: 1 }
-            data:
-              failCommands: ["getMore"]
-              blockConnection: true
-              # blockTimeMS: 15
-              # Increase timeout
-              blockTimeMS: 30
-      - name: createChangeStream
-        object: *collection
-        arguments:
-          pipeline: []
-          # timeoutMS: 10
-          # Increase timeout
-          timeoutMS: 20
-        saveResultAsEntity: &changeStream changeStream
-      # The first iteration should do a getMore
-      - name: iterateUntilDocumentOrError
-        object: *changeStream
-        expectError:
-          isTimeoutError: true
-    expectEvents:
-      - client: *client
-        events:
-          - commandStartedEvent:
-              commandName: aggregate
-              databaseName: *databaseName
-              command:
-                aggregate: *collectionName
-                maxTimeMS: { $$type: ["int", "long"] }
-          # The iterateUntilDocumentOrError operation should send a getMore.
-          - commandStartedEvent:
-              commandName: getMore
-              databaseName: *databaseName
-              command:
-                getMore: { $$type: ["int", "long"] }
-                collection: *collectionName

data/spec/spec_tests/data/client_side_operations_timeout/close-cursors.yml

@@ -1,129 +0,0 @@
-description: "timeoutMS behaves correctly when closing cursors"
-
-schemaVersion: "1.9"
-
-runOnRequirements:
-  - minServerVersion: "4.4"
-
-createEntities:
-  - client:
-      id: &failPointClient failPointClient
-      useMultipleMongoses: false
-  - client:
-      id: &client client
-      useMultipleMongoses: false
-      observeEvents:
-        - commandStartedEvent
-        - commandSucceededEvent
-        - commandFailedEvent
-  - database:
-      id: &database database
-      client: *client
-      databaseName: &databaseName test
-  - collection:
-      id: &collection collection
-      database: *database
-      collectionName: &collectionName coll
-
-initialData:
-  - collectionName: *collectionName
-    databaseName: *databaseName
-    documents:
-      - { _id: 0 }
-      - { _id: 1 }
-      - { _id: 2 }
-
-tests:
-  - description: "timeoutMS is refreshed for close"
-    operations:
-      - name: failPoint
-        object: testRunner
-        arguments:
-          client: *failPointClient
-          failPoint:
-            configureFailPoint: failCommand
-            mode: { times: 1 }
-            data:
-              failCommands: ["getMore"]
-              blockConnection: true
-              blockTimeMS: 50
-      - name: createFindCursor
-        object: *collection
-        arguments:
-          filter: {}
-          batchSize: 2
-          timeoutMS: 20
-        saveResultAsEntity: &cursor cursor
-      # Iterate the cursor three times. The third should do a getMore, which should fail with a timeout error.
-      - name: iterateUntilDocumentOrError
-        object: *cursor
-      - name: iterateUntilDocumentOrError
-        object: *cursor
-      - name: iterateUntilDocumentOrError
-        object: *cursor
-        expectError:
-          isTimeoutError: true
-      # All errors from close() are ignored, so we close the cursor here but assert that killCursors was executed
-      # successfully via command monitoring expectations below.
-      - name: close
-        object: *cursor
-    expectEvents:
-      - client: *client
-        events:
-          - commandStartedEvent:
-              commandName: find
-          - commandSucceededEvent:
-              commandName: find
-          - commandStartedEvent:
-              commandName: getMore
-          - commandFailedEvent:
-              commandName: getMore
-          - commandStartedEvent:
-              command:
-                killCursors: *collectionName
-                # The close() operation should inherit timeoutMS from the initial find().
-                maxTimeMS: { $$type: ["int", "long"] }
-              commandName: killCursors
-          - commandSucceededEvent:
-              commandName: killCursors
-
-  - description: "timeoutMS can be overridden for close"
-    operations:
-      - name: failPoint
-        object: testRunner
-        arguments:
-          client: *client
-          failPoint:
-            configureFailPoint: failCommand
-            mode: { times: 1 }
-            data:
-              failCommands: ["killCursors"]
-              blockConnection: true
-              blockTimeMS: 30
-      - name: createFindCursor
-        object: *collection
-        arguments:
-          filter: {}
-          batchSize: 2
-          timeoutMS: 20
-        saveResultAsEntity: &cursor cursor
-      - name: close
-        object: *cursor
-        arguments:
-          # timeoutMS: 40
-          # Increase timeout
-          timeoutMS: 50
-    expectEvents:
-      - client: *client
-        events:
-          - commandStartedEvent:
-              commandName: find
-          - commandSucceededEvent:
-              commandName: find
-          - commandStartedEvent:
-              command:
-                killCursors: *collectionName
-                maxTimeMS: { $$type: ["int", "long"] }
-              commandName: killCursors
-          - commandSucceededEvent:
-              commandName: killCursors