libarchive-static 1.0.5 → 1.1.0

data/ext/libarchive-2.8.4/build/autoconf/install-sh

@@ -1,291 +0,0 @@
-#!/bin/sh
-#
-# $NetBSD: install-sh.in,v 1.4 2007/07/12 18:32:50 jlam Exp $
-# This script now also installs multiple files, but might choke on installing
-# multiple files with spaces in the file names.
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-awkprog="${AWKPROG-awk}"
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-instcmd="$mvprog"
-pathcompchmodcmd="$chmodprog 755"
-chmodcmd="$chmodprog 755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-stripflags=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-msrc=""
-dst=""
-dir_arg=""
-suffix=""
-suffixfmt=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-b) suffix=".old"
-	    shift
-	    continue;;
-
-	-B) suffixfmt="$2"
-	    shift
-	    shift
-	    continue;;
-
-	-c) instcmd="$cpprog"
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd="$stripprog"
-	    shift
-	    continue;;
-
-	-S) stripcmd="$stripprog"
-	    stripflags="-S $2 $stripflags"
-	    shift
-	    shift
-	    continue;;
-
-	*)  if [ x"$msrc" = x ]
-	    then
-		msrc="$dst"
-	    else
-		msrc="$msrc $dst"
-	    fi
-	    src="$dst"
-	    dst="$1"
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$dir_arg" = x ]
-then
-	dstisfile=""
-	if [ ! -d "$dst" ]
-	then
-		if [ x"$msrc" = x"$src" ]
-		then
-			dstisfile=true
-		else
-			echo "install: destination is not a directory"
-			exit 1
-		fi
-	fi
-else
-	msrc="$msrc $dst"
-fi
-
-if [ x"$msrc" = x ]
-then
-	echo "install: no destination specified"
-	exit 1
-fi      
-
-for srcarg in $msrc; do
-
-if [ x"$dir_arg" != x ]; then
-
-	dstarg="$srcarg"
-else
-	dstarg="$dst"
-
-# Waiting for this to be detected by the "$instcmd $srcarg $dsttmp" command
-# might cause directories to be created, which would be especially bad 
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f "$srcarg" ]
-	then
-		doinst="$instcmd"
-	elif [ -d "$srcarg" ]
-	then
-		echo "install: $srcarg: not a regular file"
-		exit 1
-	elif [ "$srcarg" = "/dev/null" ]
-	then
-		doinst="$cpprog"
-	else
-		echo "install:  $srcarg does not exist"
-		exit 1
-	fi
-	
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d "$dstarg" ]
-	then
-		dstarg="$dstarg"/`basename "$srcarg"`
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo "$dstarg" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='	
-'
-IFS="${IFS-${defaultIFS}}"
-
-oIFS="${IFS}"
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS="${oIFS}"
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp="${pathcomp}${1}"
-	shift
-
-	if [ ! -d "${pathcomp}" ] ;
-        then
-		$doit $mkdirprog "${pathcomp}"
-        	if [ x"$chowncmd" != x ]; then $doit $chowncmd "${pathcomp}"; else true ; fi &&
-        	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "${pathcomp}"; else true ; fi &&
-        	if [ x"$pathcompchmodcmd" != x ]; then $doit $pathcompchmodcmd "${pathcomp}"; else true ; fi
-
-	else
-		true
-	fi
-
-	pathcomp="${pathcomp}/"
-done
-fi
-
-	if [ x"$dir_arg" != x ]
-	then
-		if [ -d "$dstarg" ]; then
-			true
-		else
-			$doit $mkdirprog "$dstarg" &&
-
-			if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dstarg"; else true ; fi &&
-			if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dstarg"; else true ; fi &&
-			if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dstarg"; else true ; fi
-		fi
-	else
-
-		if [ x"$dstisfile" = x ]
-		then
-			file=$srcarg
-		else
-			file=$dst
-		fi
-
-		dstfile=`basename "$file"`
-		dstfinal="$dstdir/$dstfile"
-
-# Make a temp file name in the proper directory.
-
-		dsttmp=$dstdir/#inst.$$#
-
-# Make a backup file name in the proper directory.
-		case x$suffixfmt in
-		*%*)	suffix=`echo x |
-			$awkprog -v bname="$dstfinal" -v fmt="$suffixfmt" '
-			{ cnt = 0;
-			  do {
-				sfx = sprintf(fmt, cnt++);
-				name = bname sfx;
-			  } while (system("test -f " name) == 0);
-			  print sfx; }' -`;;
-		x)	;;
-		*)	suffix="$suffixfmt";;
-		esac
-		dstbackup="$dstfinal$suffix"
-
-# Move or copy the file name to the temp name
-
-		$doit $doinst $srcarg "$dsttmp" &&
-
-		trap "rm -f ${dsttmp}" 0 &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-		if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else true;fi &&
-		if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else true;fi &&
-		if [ x"$stripcmd" != x ]; then $doit $stripcmd $stripflags "$dsttmp"; else true;fi &&
-		if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else true;fi &&
-
-# Now rename the file to the real destination.
-
-		if [ x"$suffix" != x ] && [ -f "$dstfinal" ]
-		then
-			$doit $mvcmd "$dstfinal" "$dstbackup"
-		else
-			$doit $rmcmd -f "$dstfinal"
-		fi &&
-		$doit $mvcmd "$dsttmp" "$dstfinal"
-	fi
-
-done &&
-
-
-exit 0