inspec 2.1.81 → 2.1.83

data/docs/resources/azure_resource_group.md.erb

@@ -1,284 +1,284 @@
----
-title: About the azure_resource_group_resource_counts Resource
-platform: azure
----
-
-# azure\_resource\_group\_resource\_counts
-
-Use the `azure_resource_group_resource_counts` InSpec audit resource to check the number of Azure resources in a resource group.
-
-## Syntax
-
-The name of the resource group is specified as a parameter on the resource:
-
-    describe azure_resource_group(name: 'MyResourceGroup') do
-      its('property') { should eq 'value' }
-    end
-
-where
-
-* `MyResourceGroup` is the name of the resource group being interrogated
-* `property` is one a resource property
-* `value` is the expected output from the matcher
-
-## Examples
-
-The following examples show how to use this InSpec audit resource:
-
-### Ensure the Resource Group has the correct number of resources
-
-    describe azure_resource_group_resource_counts(name: 'Inspec-Azure') do
-      its('total') { should eq 7}
-    end
-
-### Ensure that the Resource Group contains the correct resources
-
-    describe azure_resource_group_resource_counts(name: 'Inspec-Azure') do
-      its('total') { should eq 7 }
-      its('vm_count') { should eq 2 }
-      its('nic_count') { should eq 2 }
-      its('public_ip_count') { should eq 1 }
-      its('sa_count') { should eq 1 }
-      its('vnet_count') { should eq 1 }
-    end
-
-<br>
-
-## Parameters
-
-* `group_name`, `name`
-
-## Parameter Examples
-
-The options that can be passed to the resource are as follows.
-
-### group_name (required)
-
-Use this parameter to define the Azure Resource Group to be tested.
-
-    describe azure_virtual_machine_data_disk(group_name: 'InSpec-Azure') do
-        ...
-    end
-
-### name
-
-Use this parameter to define the name of the Azure resource to test.
-
-    describe azure_virtual_machine_data_disk(group_name: 'InSpec-Azure', name: 'Windows-Internal-VM') do
-        ...
-    end
-
-If both `group_name` and `name` is set then `name` takes priority
-
-These options can also be set using the environment variables:
-
-* `AZURE_RESOURCE_GROUP_NAME`
-* `AZURE_RESOURCE_NAME`
-
-When the options have been set as well as the environment variables, the environment variables take priority.
-
-<br>
-
-## Parameter Example
-
-    describe azure_generic_resource(group_name: 'Inspec-Azure', name: 'Linux-Internal-VM') do
-      its('location') { should eq 'westeurope' }
-    end
-
-<br>
-
-## Properties
-
-* `name`, `location` ,`id`, `provisioning_state`, `subscription_id`, `total`, `nic_count`, `vm_count`, `extension_count`, `vnet_count`, `sa_count`, `public_ip_count`,`managed_disk_image_count`, `managed_disk_count`, `tag_count`
-
-<br>
-
-## Property Examples
-
-This InSpec audit resource has the following properties:
-
-### name
-
-Tests the name of the resource group.
-
-    its('name') { should cmp 'Inspec-Azure' }
-
-### location
-
-Tests where in Azure the resource group is located.
-
-    its('location') { should cmp 'westeurope' }
-
-### id
-
-Tests the full qualified ID of the resource group.
-
-This takes the format: `/subscriptions/<SUBSCRIPTION_ID>/resourceGroups/<RESOURCE_GROUP_NAME>`.
-
-    its('id') { should cmp 'FQDN' }
-
-### provisioning_state
-
-Tests the provisioning state of the resource group.
-
-    its('provisioning_state') { should cmp 'Succeeded' }
-
-### total
-
-Tests the total number of resources in the resource group.
-
-    its('total') { should eq 13 }
-
-### nic_count
-
-Tests the number of network interface cards in the resource group.
-
-    it { should have_nics }
-    its('nic_count') { should eq 3 }
-
-### vm_count
-
-Tests the number of virtual machines in the resource group.
-
-    its('vm_count') { should eq 5 }
-
-### vnet_count
-
-Tests the number of virtual networks in the resource group.
-
-    its('vnet_count') { should eq 5 }
-
-### sa_count
-
-Tests the number of storage accounts in the resource group.
-
-    its('sa_count') { should eq 5 }
-
-### public\_ip\_count
-
-Tests the number of Public IP Addresses in the resource group.
-
-    its('public_ip_count') { should eq 5 }
-
-### managed\_disk\_image\_count
-
-Tests the number of managed disk images that are in the resource group.
-
-Managed disks are created from disk images and then attached to the machines. Generally, the images are created from a base image or a custom image (e.g., Packer)
-
-    its('managed_disk_image_count') { should eq 5 }
-
-### managed\_disk\_count
-
-Tests the number of managed disks in the resource group.
-
-If a resource group contains one virtual machine with an OS disk and 2 data disks that are all Managed Disks, then the count would be 3.
-
-    its('managed_disk_count') { should eq 3 }
-
-<br>
-
-## Matchers
-
-This resource has a number of special matchers that provide a simple way to test if a specific Azure Resource type exists in the resource group.
-
-For a full list of available matchers, please visit our [matchers page](https://www.inspec.io/docs/reference/matchers/).
-
-### have_nics
-
-Use this matcher to test if network interfaces exist.
-
-    it { should have_nics }
-
-### have_vms
-
-Use this matcher to test that virtual machines exist.
-
-    it { should have_vms }
-
-### have_extensions
-
-Use this matcher to test for virtual machine extensions.
-
-    it { should have_extensions }
-
-### have_nsgs
-
-Use this matcher to test that network security groups exist.
-
-    it { should have_nsgs }
-
-### have_vnets
-
-Use this matcher to test that virtual networks exist.
-
-    it { should have_vnets }
-
-### have\_managed\_disks
-
-Use this matcher to test that managed disks exist.
-
-    it { should have_managed_disks }
-
-### have\_managed\_disk\_images
-
-Use this matcher to test that managed disk images exist.
-
-    it { should have_managed_disk_images }
-
-### have_sas
-
-Use this matcher to test that storage accounts exist.
-
-    it { should have_sas }
-
-### have\_public\_ips
-
-Use this matcher to test that public ips exist.
-
-    it { should have_public_ips }
-
-## Tags
-
-It is possible to test the tags that have been assigned to the resource. There are some properties for checking that a resource has tags, that it has the correct number of tags, and that the correct tags are assigned.
-
-### have\_tags
-
-This is a simple test to see if the machine has tags assigned to it or not.
-
-    it { should have_tags }
-
-### tag\_count
-
-Returns the number of tags that are assigned to the resource
-
-    its ('tag_count') { should eq 2 }
-
-### tags
-
-It is possible to check if a specific tag has been set on the resource.
-
-    its('tags') { should include 'owner' }
-
-### xxx\_tag
-
-To get the value of the tag, some properties are created from the tags themselves.
-
-For example, if the following tag is set on a resource:
-
-* owner: JG Jinglehimerschmidt
-
-Then a property is available called `Owner_tag`.
-
-    its('owner_tag') { should cmp 'JG Jinglehimerschmidt' }
-
-Note: The tag name is case sensitive which makes the test case sensitive. E.g. `owner_tag` does not equal `Owner_tag`.
-
-<br>
-
-## References
-
-For more information on Azure Ruby SDK resources, see:
-
-* [Azure Ruby SDK - Resources](https://github.com/Azure/azure-sdk-for-ruby/tree/master/management/azure_mgmt_resources)
-* [Resource Group](https://github.com/chef/inspec/blob/fc990346f2438690f0ac36a9f6606e61574a79b8/test/azure/verify/controls/resource_group.rb)
+---
+title: About the azure_resource_group_resource_counts Resource
+platform: azure
+---
+
+# azure\_resource\_group\_resource\_counts
+
+Use the `azure_resource_group_resource_counts` InSpec audit resource to check the number of Azure resources in a resource group.
+
+## Syntax
+
+The name of the resource group is specified as a parameter on the resource:
+
+    describe azure_resource_group(name: 'MyResourceGroup') do
+      its('property') { should eq 'value' }
+    end
+
+where
+
+* `MyResourceGroup` is the name of the resource group being interrogated
+* `property` is one a resource property
+* `value` is the expected output from the matcher
+
+## Examples
+
+The following examples show how to use this InSpec audit resource:
+
+### Ensure the Resource Group has the correct number of resources
+
+    describe azure_resource_group_resource_counts(name: 'Inspec-Azure') do
+      its('total') { should eq 7}
+    end
+
+### Ensure that the Resource Group contains the correct resources
+
+    describe azure_resource_group_resource_counts(name: 'Inspec-Azure') do
+      its('total') { should eq 7 }
+      its('vm_count') { should eq 2 }
+      its('nic_count') { should eq 2 }
+      its('public_ip_count') { should eq 1 }
+      its('sa_count') { should eq 1 }
+      its('vnet_count') { should eq 1 }
+    end
+
+<br>
+
+## Parameters
+
+* `group_name`, `name`
+
+## Parameter Examples
+
+The options that can be passed to the resource are as follows.
+
+### group_name (required)
+
+Use this parameter to define the Azure Resource Group to be tested.
+
+    describe azure_virtual_machine_data_disk(group_name: 'InSpec-Azure') do
+        ...
+    end
+
+### name
+
+Use this parameter to define the name of the Azure resource to test.
+
+    describe azure_virtual_machine_data_disk(group_name: 'InSpec-Azure', name: 'Windows-Internal-VM') do
+        ...
+    end
+
+If both `group_name` and `name` is set then `name` takes priority
+
+These options can also be set using the environment variables:
+
+* `AZURE_RESOURCE_GROUP_NAME`
+* `AZURE_RESOURCE_NAME`
+
+When the options have been set as well as the environment variables, the environment variables take priority.
+
+<br>
+
+## Parameter Example
+
+    describe azure_generic_resource(group_name: 'Inspec-Azure', name: 'Linux-Internal-VM') do
+      its('location') { should eq 'westeurope' }
+    end
+
+<br>
+
+## Properties
+
+* `name`, `location` ,`id`, `provisioning_state`, `subscription_id`, `total`, `nic_count`, `vm_count`, `extension_count`, `vnet_count`, `sa_count`, `public_ip_count`,`managed_disk_image_count`, `managed_disk_count`, `tag_count`
+
+<br>
+
+## Property Examples
+
+This InSpec audit resource has the following properties:
+
+### name
+
+Tests the name of the resource group.
+
+    its('name') { should cmp 'Inspec-Azure' }
+
+### location
+
+Tests where in Azure the resource group is located.
+
+    its('location') { should cmp 'westeurope' }
+
+### id
+
+Tests the full qualified ID of the resource group.
+
+This takes the format: `/subscriptions/<SUBSCRIPTION_ID>/resourceGroups/<RESOURCE_GROUP_NAME>`.
+
+    its('id') { should cmp 'FQDN' }
+
+### provisioning_state
+
+Tests the provisioning state of the resource group.
+
+    its('provisioning_state') { should cmp 'Succeeded' }
+
+### total
+
+Tests the total number of resources in the resource group.
+
+    its('total') { should eq 13 }
+
+### nic_count
+
+Tests the number of network interface cards in the resource group.
+
+    it { should have_nics }
+    its('nic_count') { should eq 3 }
+
+### vm_count
+
+Tests the number of virtual machines in the resource group.
+
+    its('vm_count') { should eq 5 }
+
+### vnet_count
+
+Tests the number of virtual networks in the resource group.
+
+    its('vnet_count') { should eq 5 }
+
+### sa_count
+
+Tests the number of storage accounts in the resource group.
+
+    its('sa_count') { should eq 5 }
+
+### public\_ip\_count
+
+Tests the number of Public IP Addresses in the resource group.
+
+    its('public_ip_count') { should eq 5 }
+
+### managed\_disk\_image\_count
+
+Tests the number of managed disk images that are in the resource group.
+
+Managed disks are created from disk images and then attached to the machines. Generally, the images are created from a base image or a custom image (e.g., Packer)
+
+    its('managed_disk_image_count') { should eq 5 }
+
+### managed\_disk\_count
+
+Tests the number of managed disks in the resource group.
+
+If a resource group contains one virtual machine with an OS disk and 2 data disks that are all Managed Disks, then the count would be 3.
+
+    its('managed_disk_count') { should eq 3 }
+
+<br>
+
+## Matchers
+
+This resource has a number of special matchers that provide a simple way to test if a specific Azure Resource type exists in the resource group.
+
+For a full list of available matchers, please visit our [matchers page](https://www.inspec.io/docs/reference/matchers/).
+
+### have_nics
+
+Use this matcher to test if network interfaces exist.
+
+    it { should have_nics }
+
+### have_vms
+
+Use this matcher to test that virtual machines exist.
+
+    it { should have_vms }
+
+### have_extensions
+
+Use this matcher to test for virtual machine extensions.
+
+    it { should have_extensions }
+
+### have_nsgs
+
+Use this matcher to test that network security groups exist.
+
+    it { should have_nsgs }
+
+### have_vnets
+
+Use this matcher to test that virtual networks exist.
+
+    it { should have_vnets }
+
+### have\_managed\_disks
+
+Use this matcher to test that managed disks exist.
+
+    it { should have_managed_disks }
+
+### have\_managed\_disk\_images
+
+Use this matcher to test that managed disk images exist.
+
+    it { should have_managed_disk_images }
+
+### have_sas
+
+Use this matcher to test that storage accounts exist.
+
+    it { should have_sas }
+
+### have\_public\_ips
+
+Use this matcher to test that public ips exist.
+
+    it { should have_public_ips }
+
+## Tags
+
+It is possible to test the tags that have been assigned to the resource. There are some properties for checking that a resource has tags, that it has the correct number of tags, and that the correct tags are assigned.
+
+### have\_tags
+
+This is a simple test to see if the machine has tags assigned to it or not.
+
+    it { should have_tags }
+
+### tag\_count
+
+Returns the number of tags that are assigned to the resource
+
+    its ('tag_count') { should eq 2 }
+
+### tags
+
+It is possible to check if a specific tag has been set on the resource.
+
+    its('tags') { should include 'owner' }
+
+### xxx\_tag
+
+To get the value of the tag, some properties are created from the tags themselves.
+
+For example, if the following tag is set on a resource:
+
+* owner: JG Jinglehimerschmidt
+
+Then a property is available called `Owner_tag`.
+
+    its('owner_tag') { should cmp 'JG Jinglehimerschmidt' }
+
+Note: The tag name is case sensitive which makes the test case sensitive. E.g. `owner_tag` does not equal `Owner_tag`.
+
+<br>
+
+## References
+
+For more information on Azure Ruby SDK resources, see:
+
+* [Azure Ruby SDK - Resources](https://github.com/Azure/azure-sdk-for-ruby/tree/master/management/azure_mgmt_resources)
+* [Resource Group](https://github.com/chef/inspec/blob/fc990346f2438690f0ac36a9f6606e61574a79b8/test/azure/verify/controls/resource_group.rb)