inspec 2.1.81 → 2.1.83

data/lib/resources/aws/aws_subnet.rb

@@ -1,88 +1,88 @@
-class AwsSubnet < Inspec.resource(1)
-  name 'aws_subnet'
-  desc 'This resource is used to test the attributes of a VPC subnet'
-  example "
-    describe aws_subnet(subnet_id: 'subnet-12345678') do
-      it { should exist }
-      its('cidr_block') { should eq '10.0.1.0/24' }
-    end
-  "
-  supports platform: 'aws'
-
-  include AwsSingularResourceMixin
-  attr_reader :assigning_ipv_6_address_on_creation, :availability_zone, :available_ip_address_count,
-              :available, :cidr_block, :default_for_az, :ipv_6_cidr_block_association_set,
-              :mapping_public_ip_on_launch, :subnet_id, :vpc_id
-  alias available? available
-  alias default_for_az? default_for_az
-  alias mapping_public_ip_on_launch? mapping_public_ip_on_launch
-  alias assigning_ipv_6_address_on_creation? assigning_ipv_6_address_on_creation
-
-  def to_s
-    "VPC Subnet #{@subnet_id}"
-  end
-
-  private
-
-  def validate_params(raw_params)
-    validated_params = check_resource_param_names(
-      raw_params: raw_params,
-      allowed_params: [:subnet_id],
-      allowed_scalar_name: :subnet_id,
-      allowed_scalar_type: String,
-    )
-
-    # Make sure the subnet_id parameter was specified and in the correct form.
-    if validated_params.key?(:subnet_id) && validated_params[:subnet_id] !~ /^subnet\-[0-9a-f]{8}/
-      raise ArgumentError, 'aws_subnet Subnet ID must be in the format "subnet-" followed by 8 hexadecimal characters.'
-    end
-
-    if validated_params.empty?
-      raise ArgumentError, 'You must provide a subnet_id to aws_subnet.'
-    end
-
-    validated_params
-  end
-
-  def fetch_from_api
-    backend = BackendFactory.create(inspec_runner)
-
-    # Transform into filter format expected by AWS
-    filters = []
-    filters.push({ name: 'subnet-id', values: [@subnet_id] })
-    ds_response = backend.describe_subnets(filters: filters)
-
-    # If no subnets exist in the VPC, exist is false.
-    if ds_response.subnets.empty?
-      @exists = false
-      return
-    end
-    @exists = true
-    assign_properties(ds_response)
-  end
-
-  def assign_properties(ds_response)
-    @vpc_id                              = ds_response.subnets[0].vpc_id
-    @subnet_id                           = ds_response.subnets[0].subnet_id
-    @cidr_block                          = ds_response.subnets[0].cidr_block
-    @availability_zone                   = ds_response.subnets[0].availability_zone
-    @available_ip_address_count          = ds_response.subnets[0].available_ip_address_count
-    @default_for_az                      = ds_response.subnets[0].default_for_az
-    @mapping_public_ip_on_launch         = ds_response.subnets[0].map_public_ip_on_launch
-    @available                           = ds_response.subnets[0].state == 'available'
-    @ipv_6_cidr_block_association_set    = ds_response.subnets[0].ipv_6_cidr_block_association_set
-    @assigning_ipv_6_address_on_creation = ds_response.subnets[0].assign_ipv_6_address_on_creation
-  end
-
-  # Uses the SDK API to really talk to AWS
-  class Backend
-    class AwsClientApi < AwsBackendBase
-      BackendFactory.set_default_backend(self)
-      self.aws_client_class = Aws::EC2::Client
-
-      def describe_subnets(query)
-        aws_service_client.describe_subnets(query)
-      end
-    end
-  end
-end
+class AwsSubnet < Inspec.resource(1)
+  name 'aws_subnet'
+  desc 'This resource is used to test the attributes of a VPC subnet'
+  example "
+    describe aws_subnet(subnet_id: 'subnet-12345678') do
+      it { should exist }
+      its('cidr_block') { should eq '10.0.1.0/24' }
+    end
+  "
+  supports platform: 'aws'
+
+  include AwsSingularResourceMixin
+  attr_reader :assigning_ipv_6_address_on_creation, :availability_zone, :available_ip_address_count,
+              :available, :cidr_block, :default_for_az, :ipv_6_cidr_block_association_set,
+              :mapping_public_ip_on_launch, :subnet_id, :vpc_id
+  alias available? available
+  alias default_for_az? default_for_az
+  alias mapping_public_ip_on_launch? mapping_public_ip_on_launch
+  alias assigning_ipv_6_address_on_creation? assigning_ipv_6_address_on_creation
+
+  def to_s
+    "VPC Subnet #{@subnet_id}"
+  end
+
+  private
+
+  def validate_params(raw_params)
+    validated_params = check_resource_param_names(
+      raw_params: raw_params,
+      allowed_params: [:subnet_id],
+      allowed_scalar_name: :subnet_id,
+      allowed_scalar_type: String,
+    )
+
+    # Make sure the subnet_id parameter was specified and in the correct form.
+    if validated_params.key?(:subnet_id) && validated_params[:subnet_id] !~ /^subnet\-[0-9a-f]{8}/
+      raise ArgumentError, 'aws_subnet Subnet ID must be in the format "subnet-" followed by 8 hexadecimal characters.'
+    end
+
+    if validated_params.empty?
+      raise ArgumentError, 'You must provide a subnet_id to aws_subnet.'
+    end
+
+    validated_params
+  end
+
+  def fetch_from_api
+    backend = BackendFactory.create(inspec_runner)
+
+    # Transform into filter format expected by AWS
+    filters = []
+    filters.push({ name: 'subnet-id', values: [@subnet_id] })
+    ds_response = backend.describe_subnets(filters: filters)
+
+    # If no subnets exist in the VPC, exist is false.
+    if ds_response.subnets.empty?
+      @exists = false
+      return
+    end
+    @exists = true
+    assign_properties(ds_response)
+  end
+
+  def assign_properties(ds_response)
+    @vpc_id                              = ds_response.subnets[0].vpc_id
+    @subnet_id                           = ds_response.subnets[0].subnet_id
+    @cidr_block                          = ds_response.subnets[0].cidr_block
+    @availability_zone                   = ds_response.subnets[0].availability_zone
+    @available_ip_address_count          = ds_response.subnets[0].available_ip_address_count
+    @default_for_az                      = ds_response.subnets[0].default_for_az
+    @mapping_public_ip_on_launch         = ds_response.subnets[0].map_public_ip_on_launch
+    @available                           = ds_response.subnets[0].state == 'available'
+    @ipv_6_cidr_block_association_set    = ds_response.subnets[0].ipv_6_cidr_block_association_set
+    @assigning_ipv_6_address_on_creation = ds_response.subnets[0].assign_ipv_6_address_on_creation
+  end
+
+  # Uses the SDK API to really talk to AWS
+  class Backend
+    class AwsClientApi < AwsBackendBase
+      BackendFactory.set_default_backend(self)
+      self.aws_client_class = Aws::EC2::Client
+
+      def describe_subnets(query)
+        aws_service_client.describe_subnets(query)
+      end
+    end
+  end
+end

data/lib/resources/aws/aws_subnets.rb

@@ -1,53 +1,53 @@
-class AwsSubnets < Inspec.resource(1)
-  name 'aws_subnets'
-  desc 'Verifies settings for VPC Subnets in bulk'
-  example "
-    # you should be able to test the cidr_block of a subnet
-    describe aws_subnets.where(vpc_id: 'vpc-123456789') do
-      its('subnet_ids') { should eq ['subnet-12345678', 'subnet-87654321'] }
-      its('cidr_blocks') { should eq ['172.31.96.0/20'] }
-      its('states') { should_not include 'pending' }
-    end
-  "
-  supports platform: 'aws'
-
-  include AwsPluralResourceMixin
-
-  def validate_params(resource_params)
-    unless resource_params.empty?
-      raise ArgumentError, 'aws_vpc_subnets does not accept resource parameters.'
-    end
-    resource_params
-  end
-
-  def fetch_from_api
-    backend = BackendFactory.create(inspec_runner)
-    @table = backend.describe_subnets.subnets.map(&:to_h)
-  end
-
-  # Underlying FilterTable implementation.
-  filter = FilterTable.create
-  filter.add_accessor(:where)
-        .add_accessor(:entries)
-        .add(:exists?) { |x| !x.entries.empty? }
-        .add(:vpc_ids, field: :vpc_id)
-        .add(:subnet_ids, field: :subnet_id)
-        .add(:cidr_blocks, field: :cidr_block)
-        .add(:states, field: :state)
-  filter.connect(self, :table)
-
-  def to_s
-    'EC2 VPC Subnets'
-  end
-
-  class Backend
-    class AwsClientApi < AwsBackendBase
-      BackendFactory.set_default_backend self
-      self.aws_client_class = Aws::EC2::Client
-
-      def describe_subnets(query = {})
-        aws_service_client.describe_subnets(query)
-      end
-    end
-  end
-end
+class AwsSubnets < Inspec.resource(1)
+  name 'aws_subnets'
+  desc 'Verifies settings for VPC Subnets in bulk'
+  example "
+    # you should be able to test the cidr_block of a subnet
+    describe aws_subnets.where(vpc_id: 'vpc-123456789') do
+      its('subnet_ids') { should eq ['subnet-12345678', 'subnet-87654321'] }
+      its('cidr_blocks') { should eq ['172.31.96.0/20'] }
+      its('states') { should_not include 'pending' }
+    end
+  "
+  supports platform: 'aws'
+
+  include AwsPluralResourceMixin
+
+  def validate_params(resource_params)
+    unless resource_params.empty?
+      raise ArgumentError, 'aws_vpc_subnets does not accept resource parameters.'
+    end
+    resource_params
+  end
+
+  def fetch_from_api
+    backend = BackendFactory.create(inspec_runner)
+    @table = backend.describe_subnets.subnets.map(&:to_h)
+  end
+
+  # Underlying FilterTable implementation.
+  filter = FilterTable.create
+  filter.add_accessor(:where)
+        .add_accessor(:entries)
+        .add(:exists?) { |x| !x.entries.empty? }
+        .add(:vpc_ids, field: :vpc_id)
+        .add(:subnet_ids, field: :subnet_id)
+        .add(:cidr_blocks, field: :cidr_block)
+        .add(:states, field: :state)
+  filter.connect(self, :table)
+
+  def to_s
+    'EC2 VPC Subnets'
+  end
+
+  class Backend
+    class AwsClientApi < AwsBackendBase
+      BackendFactory.set_default_backend self
+      self.aws_client_class = Aws::EC2::Client
+
+      def describe_subnets(query = {})
+        aws_service_client.describe_subnets(query)
+      end
+    end
+  end
+end

data/lib/resources/aws/aws_vpc.rb

@@ -1,73 +1,73 @@
-class AwsVpc < Inspec.resource(1)
-  name 'aws_vpc'
-  desc 'Verifies settings for AWS VPC'
-  example "
-    describe aws_vpc do
-      it { should be_default }
-      its('cidr_block') { should cmp '10.0.0.0/16' }
-    end
-  "
-  supports platform: 'aws'
-
-  include AwsSingularResourceMixin
-
-  def to_s
-    "VPC #{vpc_id}"
-  end
-
-  attr_reader :cidr_block, :dhcp_options_id, :instance_tenancy, :is_default,\
-              :state, :vpc_id
-
-  alias default? is_default
-
-  private
-
-  def validate_params(raw_params)
-    validated_params = check_resource_param_names(
-      raw_params: raw_params,
-      allowed_params: [:vpc_id],
-      allowed_scalar_name: :vpc_id,
-      allowed_scalar_type: String,
-    )
-
-    if validated_params.key?(:vpc_id) && validated_params[:vpc_id] !~ /^vpc\-[0-9a-f]{8}/
-      raise ArgumentError, 'aws_vpc VPC ID must be in the format "vpc-" followed by 8 hexadecimal characters.'
-    end
-
-    validated_params
-  end
-
-  def fetch_from_api
-    backend = BackendFactory.create(inspec_runner)
-
-    if @vpc_id.nil?
-      filter = { name: 'isDefault', values: ['true'] }
-    else
-      filter = { name: 'vpc-id', values: [@vpc_id] }
-    end
-
-    resp = backend.describe_vpcs({ filters: [filter] })
-
-    vpc = resp.vpcs[0].to_h
-    @exists = !vpc.empty?
-    return unless @exists
-
-    @cidr_block = vpc[:cidr_block]
-    @dhcp_options_id = vpc[:dhcp_options_id]
-    @instance_tenancy = vpc[:instance_tenancy]
-    @is_default = vpc[:is_default]
-    @state = vpc[:state]
-    @vpc_id = vpc[:vpc_id]
-  end
-
-  class Backend
-    class AwsClientApi < AwsBackendBase
-      BackendFactory.set_default_backend(self)
-      self.aws_client_class = Aws::EC2::Client
-
-      def describe_vpcs(query)
-        aws_service_client.describe_vpcs(query)
-      end
-    end
-  end
-end
+class AwsVpc < Inspec.resource(1)
+  name 'aws_vpc'
+  desc 'Verifies settings for AWS VPC'
+  example "
+    describe aws_vpc do
+      it { should be_default }
+      its('cidr_block') { should cmp '10.0.0.0/16' }
+    end
+  "
+  supports platform: 'aws'
+
+  include AwsSingularResourceMixin
+
+  def to_s
+    "VPC #{vpc_id}"
+  end
+
+  attr_reader :cidr_block, :dhcp_options_id, :instance_tenancy, :is_default,\
+              :state, :vpc_id
+
+  alias default? is_default
+
+  private
+
+  def validate_params(raw_params)
+    validated_params = check_resource_param_names(
+      raw_params: raw_params,
+      allowed_params: [:vpc_id],
+      allowed_scalar_name: :vpc_id,
+      allowed_scalar_type: String,
+    )
+
+    if validated_params.key?(:vpc_id) && validated_params[:vpc_id] !~ /^vpc\-[0-9a-f]{8}/
+      raise ArgumentError, 'aws_vpc VPC ID must be in the format "vpc-" followed by 8 hexadecimal characters.'
+    end
+
+    validated_params
+  end
+
+  def fetch_from_api
+    backend = BackendFactory.create(inspec_runner)
+
+    if @vpc_id.nil?
+      filter = { name: 'isDefault', values: ['true'] }
+    else
+      filter = { name: 'vpc-id', values: [@vpc_id] }
+    end
+
+    resp = backend.describe_vpcs({ filters: [filter] })
+
+    vpc = resp.vpcs[0].to_h
+    @exists = !vpc.empty?
+    return unless @exists
+
+    @cidr_block = vpc[:cidr_block]
+    @dhcp_options_id = vpc[:dhcp_options_id]
+    @instance_tenancy = vpc[:instance_tenancy]
+    @is_default = vpc[:is_default]
+    @state = vpc[:state]
+    @vpc_id = vpc[:vpc_id]
+  end
+
+  class Backend
+    class AwsClientApi < AwsBackendBase
+      BackendFactory.set_default_backend(self)
+      self.aws_client_class = Aws::EC2::Client
+
+      def describe_vpcs(query)
+        aws_service_client.describe_vpcs(query)
+      end
+    end
+  end
+end

data/lib/resources/aws/aws_vpcs.rb

@@ -1,52 +1,52 @@
-class AwsVpcs < Inspec.resource(1)
-  name 'aws_vpcs'
-  desc 'Verifies settings for AWS VPCs in bulk'
-  example '
-    describe aws_vpcs do
-      it { should exist }
-    end
-  '
-  supports platform: 'aws'
-
-  include AwsPluralResourceMixin
-
-  # Underlying FilterTable implementation.
-  filter = FilterTable.create
-  filter.add_accessor(:entries)
-        .add_accessor(:where)
-        .add(:exists?) { |x| !x.entries.empty? }
-        .add(:cidr_blocks, field: :cidr_block)
-        .add(:vpc_ids, field: :vpc_id)
-  # We need a dummy here, so FilterTable will define and populate the dhcp_options_id field
-  filter.add(:dummy, field: :dhcp_options_id)
-        .add(:dhcp_options_ids) { |obj| obj.entries.map(&:dhcp_options_id).uniq }
-  filter.connect(self, :table)
-
-  def validate_params(raw_params)
-    # No params yet
-    unless raw_params.empty?
-      raise ArgumentError, 'aws_vpcs does not accept resource parameters'
-    end
-    raw_params
-  end
-
-  def to_s
-    'VPCs'
-  end
-
-  def fetch_from_api
-    describe_vpcs_response = BackendFactory.create(inspec_runner).describe_vpcs
-    @table = describe_vpcs_response.to_h[:vpcs].map(&:to_h)
-  end
-
-  class Backend
-    class AwsClientApi < AwsBackendBase
-      BackendFactory.set_default_backend(self)
-      self.aws_client_class = Aws::EC2::Client
-
-      def describe_vpcs(query = {})
-        aws_service_client.describe_vpcs(query)
-      end
-    end
-  end
-end
+class AwsVpcs < Inspec.resource(1)
+  name 'aws_vpcs'
+  desc 'Verifies settings for AWS VPCs in bulk'
+  example '
+    describe aws_vpcs do
+      it { should exist }
+    end
+  '
+  supports platform: 'aws'
+
+  include AwsPluralResourceMixin
+
+  # Underlying FilterTable implementation.
+  filter = FilterTable.create
+  filter.add_accessor(:entries)
+        .add_accessor(:where)
+        .add(:exists?) { |x| !x.entries.empty? }
+        .add(:cidr_blocks, field: :cidr_block)
+        .add(:vpc_ids, field: :vpc_id)
+  # We need a dummy here, so FilterTable will define and populate the dhcp_options_id field
+  filter.add(:dummy, field: :dhcp_options_id)
+        .add(:dhcp_options_ids) { |obj| obj.entries.map(&:dhcp_options_id).uniq }
+  filter.connect(self, :table)
+
+  def validate_params(raw_params)
+    # No params yet
+    unless raw_params.empty?
+      raise ArgumentError, 'aws_vpcs does not accept resource parameters'
+    end
+    raw_params
+  end
+
+  def to_s
+    'VPCs'
+  end
+
+  def fetch_from_api
+    describe_vpcs_response = BackendFactory.create(inspec_runner).describe_vpcs
+    @table = describe_vpcs_response.to_h[:vpcs].map(&:to_h)
+  end
+
+  class Backend
+    class AwsClientApi < AwsBackendBase
+      BackendFactory.set_default_backend(self)
+      self.aws_client_class = Aws::EC2::Client
+
+      def describe_vpcs(query = {})
+        aws_service_client.describe_vpcs(query)
+      end
+    end
+  end
+end