id3tag 0.10.0 → 0.13.0

data/spec/spec_helper.rb

@@ -1,23 +0,0 @@
-unless ENV['RUBY_VERSION'] =~ /rbx/
-  if ENV['CI']
-    require 'coveralls'
-    Coveralls.wear!
-  else
-    require 'pry'
-    require 'simplecov'
-    SimpleCov.start
-  end
-end
-
-$LOAD_PATH.unshift(File.join(File.dirname(__FILE__), '..', 'lib'))
-$LOAD_PATH.unshift(File.dirname(__FILE__))
-require 'rspec'
-require 'id3tag'
-
-# Requires supporting files with custom matchers and macros, etc,
-# in ./support/ and its subdirectories.
-Dir["#{File.dirname(__FILE__)}/support/**/*.rb"].each { |f| require f }
-
-RSpec.configure do |config|
-
-end

data/spec/support/mp3_fixtures.rb

@@ -1,4 +0,0 @@
-def mp3_fixture(filename)
-  fixtures_dir = File.expand_path('../../fixtures', __FILE__)
-  File.open(File.join(fixtures_dir, filename), "rb")
-end

data/standard_documents/id3v2-00.txt

@@ -1,1657 +0,0 @@
-Informal standard                                             M. Nilsson
-Document: id3v2-00.txt                                   26th March 1998
-
-
-                            ID3 tag version 2
-
-Status of this document
-
-   This document is an Informal standard and is released so that
-   implementors could have a set standard before the formal standard is
-   set. The formal standard will use another version number if not
-   identical to what is described in this document. The contents in this
-   document may change for clarifications but never for added or altered
-   functionallity.
-
-   Distribution of this document is unlimited.
-
-
-Abstract
-
-   The recent gain of popularity for MPEG layer III audio files on the
-   internet forced a standardised way of storing information about an
-   audio file within itself to determinate its origin and contents.
-
-   Today the most accepted way to do this is with the so called ID3 tag,
-   which is simple but very limited and in some cases very unsuitable.
-   The ID3 tag has very limited space in every field, very limited
-   numbers of fields, not expandable or upgradeable and is placed at the
-   end of a the file, which is unsuitable for streaming audio. This draft
-   is an attempt to answer these issues with a new version of the ID3
-   tag.
-
-
-1.   Table of contents
-
-   2.   Conventions in this document
-   3.   ID3v2 overview
-     3.1.   ID3v2 header
-     3.2.   ID3v2 frames overview
-   4.   Declared ID3v2 frames
-     4.1.   Unique file identifier
-     4.2.   Text information frames
-       4.2.1.   Text information frames - details
-       4.2.2.   User defined text information frame
-     4.3.   URL link frames
-       4.3.1.   URL link frames - details
-       4.3.2.   User defined URL link frame
-     4.4.   Involved people list
-     4.5.   Music CD Identifier
-     4.6.   Event timing codes
-     4.7.   MPEG location lookup table
-     4.8.   Synced tempo codes
-     4.9.   Unsychronised lyrics/text transcription
-     4.10.  Synchronised lyrics/text
-     4.11.  Comments
-     4.12.  Relative volume adjustment
-     4.13.  Equalisation
-     4.14.  Reverb
-     4.15.  Attached picture
-     4.16.  General encapsulated object
-     4.17.  Play counter
-     4.18.  Popularimeter
-     4.19.  Recommended buffer size
-     4.20.  Encrypted meta frame
-     4.21.  Audio encryption
-     4.22.  Linked information
-   5.   The 'unsynchronisation scheme'
-   6.   Copyright
-   7.   References
-   8.   Appendix
-     A.   Appendix A - ID3-Tag Specification V1.1
-       A.1.   Overview
-       A.2.   ID3v1 Implementation
-       A.3.   Genre List
-       A.4.   Track addition - ID3v1.1
-   9.   Author's Address
-
-
-2.   Conventions in this document
-
-   In the examples, text within "" is a text string exactly as it appears
-   in a file. Numbers preceded with $ are hexadecimal and numbers
-   preceded with % are binary. $xx is used to indicate a byte with
-   unknown content. %x is used to indicate a bit with unknown content.
-   The most significant bit (MSB) of a byte is called 'bit 7' and the
-   least significant bit (LSB) is called 'bit 0'.
-
-   A tag is the whole tag described in this document. A frame is a block
-   of information in the tag. The tag consists of a header, frames and
-   optional padding. A field is a piece of information; one value, a
-   string etc. A numeric string is a string that consists of the
-   characters 0-9 only.
-
-
-3.   ID3v2 overview
-
-   The two biggest design goals were to be able to implement ID3v2
-   without disturbing old software too much and that ID3v2 should be
-   expandable.
-
-   The first criterion is met by the simple fact that the MPEG [MPEG]
-   decoding software uses a syncsignal, embedded in the audiostream, to
-   'lock on to' the audio. Since the ID3v2 tag doesn't contain a valid
-   syncsignal, no software will attempt to play the tag. If, for any
-   reason, coincidence make a syncsignal appear within the tag it will be
-   taken care of by the 'unsynchronisation scheme' described in section
-   5.
-
-   The second criterion has made a more noticeable impact on the design
-   of the ID3v2 tag. It is constructed as a container for several
-   information blocks, called frames, whose format need not be known to
-   the software that encounters them. At the start of every frame there
-   is an identifier that explains the frames's format and content, and a
-   size descriptor that allows software to skip unknown frames.
-
-   If a total revision of the ID3v2 tag should be needed, there is a
-   version number and a size descriptor in the ID3v2 header.
-
-   The ID3 tag described in this document is mainly targeted to files
-   encoded with MPEG-2 layer I, MPEG-2 layer II, MPEG-2 layer III and
-   MPEG-2.5, but may work with other types of encoded audio.
-
-   The bitorder in ID3v2 is most significant bit first (MSB). The
-   byteorder in multibyte numbers is most significant byte first (e.g.
-   $12345678 would be encoded $12 34 56 78).
-
-   It is permitted to include padding after all the final frame (at the
-   end of the ID3 tag), making the size of all the frames together
-   smaller than the size given in the head of the tag. A possible purpose
-   of this padding is to allow for adding a few additional frames or
-   enlarge existing frames within the tag without having to rewrite the
-   entire file. The value of the padding bytes must be $00.
-
-
-3.1.   ID3v2 header
-
-   The ID3v2 tag header, which should be the first information in the
-   file, is 10 bytes as follows:
-
-     ID3/file identifier      "ID3"
-     ID3 version              $02 00
-     ID3 flags                %xx000000
-     ID3 size             4 * %0xxxxxxx
-
-   The first three bytes of the tag are always "ID3" to indicate that
-   this is an ID3 tag, directly followed by the two version bytes. The
-   first byte of ID3 version is it's major version, while the second byte
-   is its revision number. All revisions are backwards compatible while
-   major versions are not. If software with ID3v2 and below support
-   should encounter version three or higher it should simply ignore the
-   whole tag. Version and revision will never be $FF.
-
-   The first bit (bit 7) in the 'ID3 flags' is indicating whether or not
-   unsynchronisation is used (see section 5 for details); a set bit
-   indicates usage.
-
-   The second bit (bit 6) is indicating whether or not compression is
-   used; a set bit indicates usage. Since no compression scheme has been
-   decided yet, the ID3 decoder (for now) should just ignore the entire
-   tag if the compression bit is set.
-
-   The ID3 tag size is encoded with four bytes where the first bit (bit
-   7) is set to zero in every byte, making a total of 28 bits. The zeroed
-   bits are ignored, so a 257 bytes long tag is represented as $00 00 02
-   01.
-
-   The ID3 tag size is the size of the complete tag after
-   unsychronisation, including padding, excluding the header (total tag
-   size - 10). The reason to use 28 bits (representing up to 256MB) for
-   size description is that we don't want to run out of space here.
-
-   A ID3v2 tag can be detected with the following pattern:
-     $49 44 33 yy yy xx zz zz zz zz
-   Where yy is less than $FF, xx is the 'flags' byte and zz is less than
-   $80.
-
-
-3.2.   ID3v2 frames overview
-
-   The headers of the frames are similar in their construction. They
-   consist of one three character identifier (capital A-Z and 0-9) and
-   one three byte size field, making a total of six bytes. The header is
-   excluded from the size. Identifiers beginning with "X", "Y" and "Z"
-   are for experimental use and free for everyone to use. Have in mind
-   that someone else might have used the same identifier as you. All
-   other identifiers are either used or reserved for future use.
-
-   The three character frame identifier is followed by a three byte size
-   descriptor, making a total header size of six bytes in every frame.
-   The size is calculated as framesize excluding frame identifier and
-   size descriptor (frame size - 6).
-
-   There is no fixed order of the frames' appearance in the tag, although
-   it is desired that the frames are arranged in order of significance
-   concerning the recognition of the file. An example of such order:
-   UFI, MCI, TT2 ...
-
-   A tag must contain at least one frame. A frame must be at least 1 byte
-   big, excluding the 6-byte header.
-
-   If nothing else is said a string is represented as ISO-8859-1
-   [ISO-8859-1] characters in the range $20 - $FF. All unicode strings
-   [UNICODE] use 16-bit unicode 2.0 (ISO/IEC 10646-1:1993, UCS-2). All
-   numeric strings are always encoded as ISO-8859-1. Terminated strings
-   are terminated with $00 if encoded with ISO-8859-1 and $00 00 if
-   encoded as unicode. If nothing else is said newline character is
-   forbidden. In ISO-8859-1 a new line is represented, when allowed, with
-   $0A only. Frames that allow different types of text encoding have a
-   text encoding description byte directly after the frame size. If
-   ISO-8859-1 is used this byte should be $00, if unicode is used it
-   should be $01.
-
-   The three byte language field is used to describe the language of the
-   frame's content, according to ISO-639-2 [ISO-639-2].
-
-   All URLs [URL] may be relative, e.g. "picture.png", "../doc.txt".
-
-   If a frame is longer than it should be, e.g. having more fields than
-   specified in this document, that indicates that additions to the
-   frame have been made in a later version of the ID3 standard. This
-   is reflected by the revision number in the header of the tag.
-
-
-4.   Declared ID3v2 frames
-
-   The following frames are declared in this draft.
-
-   4.19  BUF Recommended buffer size
-
-   4.17  CNT Play counter
-   4.11  COM Comments
-   4.21  CRA Audio encryption
-   4.20  CRM Encrypted meta frame
-
-   4.6   ETC Event timing codes
-   4.13  EQU Equalization
-
-   4.16  GEO General encapsulated object
-
-   4.4   IPL Involved people list
-
-   4.22  LNK Linked information
-
-   4.5   MCI Music CD Identifier
-   4.7   MLL MPEG location lookup table
-
-   4.15  PIC Attached picture
-   4.18  POP Popularimeter
-
-   4.14  REV Reverb
-   4.12  RVA Relative volume adjustment
-
-   4.10  SLT Synchronized lyric/text
-   4.8   STC Synced tempo codes
-
-   4.2.1 TAL Album/Movie/Show title
-   4.2.1 TBP BPM (Beats Per Minute)
-   4.2.1 TCM Composer
-   4.2.1 TCO Content type
-   4.2.1 TCR Copyright message
-   4.2.1 TDA Date
-   4.2.1 TDY Playlist delay
-   4.2.1 TEN Encoded by
-   4.2.1 TFT File type
-   4.2.1 TIM Time
-   4.2.1 TKE Initial key
-   4.2.1 TLA Language(s)
-   4.2.1 TLE Length
-   4.2.1 TMT Media type
-   4.2.1 TOA Original artist(s)/performer(s)
-   4.2.1 TOF Original filename
-   4.2.1 TOL Original Lyricist(s)/text writer(s)
-   4.2.1 TOR Original release year
-   4.2.1 TOT Original album/Movie/Show title
-   4.2.1 TP1 Lead artist(s)/Lead performer(s)/Soloist(s)/Performing group
-   4.2.1 TP2 Band/Orchestra/Accompaniment
-   4.2.1 TP3 Conductor/Performer refinement
-   4.2.1 TP4 Interpreted, remixed, or otherwise modified by
-   4.2.1 TPA Part of a set
-   4.2.1 TPB Publisher
-   4.2.1 TRC ISRC (International Standard Recording Code)
-   4.2.1 TRD Recording dates
-   4.2.1 TRK Track number/Position in set
-   4.2.1 TSI Size
-   4.2.1 TSS Software/hardware and settings used for encoding
-   4.2.1 TT1 Content group description
-   4.2.1 TT2 Title/Songname/Content description
-   4.2.1 TT3 Subtitle/Description refinement
-   4.2.1 TXT Lyricist/text writer
-   4.2.2 TXX User defined text information frame
-   4.2.1 TYE Year
-
-   4.1   UFI Unique file identifier
-   4.9   ULT Unsychronized lyric/text transcription
-
-   4.3.1 WAF Official audio file webpage
-   4.3.1 WAR Official artist/performer webpage
-   4.3.1 WAS Official audio source webpage
-   4.3.1 WCM Commercial information
-   4.3.1 WCP Copyright/Legal information
-   4.3.1 WPB Publishers official webpage
-   4.3.2 WXX User defined URL link frame
-
-
-4.1.   Unique file identifier
-
-   This frame's purpose is to be able to identify the audio file in a
-   database that may contain more information relevant to the content.
-   Since standardisation of such a database is beyond this document, all
-   frames begin with a null-terminated string with a URL [URL] containing
-   an email address, or a link to a location where an email address can
-   be found, that belongs to the organisation responsible for this
-   specific database implementation. Questions regarding the database
-   should be sent to the indicated email address. The URL should not be
-   used for the actual database queries. If a $00 is found directly after
-   the 'Frame size' the whole frame should be ignored, and preferably be
-   removed. The 'Owner identifier' is then followed by the actual
-   identifier, which may be up to 64 bytes. There may be more than one
-   "UFI" frame in a tag, but only one with the same 'Owner identifier'.
-
-     Unique file identifier  "UFI"
-     Frame size              $xx xx xx
-     Owner identifier        <textstring> $00
-     Identifier              <up to 64 bytes binary data>
-
-
-4.2.   Text information frames
-
-   The text information frames are the most important frames, containing
-   information like artist, album and more. There may only be one text
-   information frame of its kind in an tag. If the textstring is followed
-   by a termination ($00 (00)) all the following information should be
-   ignored and not be displayed. All the text information frames have the
-   following format:
-
-     Text information identifier  "T00" - "TZZ" , excluding "TXX",
-                                   described in 4.2.2.
-     Frame size                   $xx xx xx
-     Text encoding                $xx
-     Information                  <textstring>
-
-
-4.2.1.   Text information frames - details
-
-  TT1
-   The 'Content group description' frame is used if the sound belongs to
-   a larger category of sounds/music. For example, classical music is
-   often sorted in different musical sections (e.g. "Piano Concerto",
-   "Weather - Hurricane").
-
-  TT2
-   The 'Title/Songname/Content description' frame is the actual name of
-   the piece (e.g. "Adagio", "Hurricane Donna").
-
-  TT3
-   The 'Subtitle/Description refinement' frame is used for information
-   directly related to the contents title (e.g. "Op. 16" or "Performed
-   live at wembley").
-
-  TP1
-   The 'Lead artist(s)/Lead performer(s)/Soloist(s)/Performing group' is
-   used for the main artist(s). They are seperated with the "/"
-   character.
-
-  TP2
-   The 'Band/Orchestra/Accompaniment' frame is used for additional
-   information about the performers in the recording.
-
-  TP3
-   The 'Conductor' frame is used for the name of the conductor.
-   
-  TP4
-   The 'Interpreted, remixed, or otherwise modified by' frame contains
-   more information about the people behind a remix and similar
-   interpretations of another existing piece.
-
-  TCM
-   The 'Composer(s)' frame is intended for the name of the composer(s).
-   They are seperated with the "/" character.
-
-  TXT
-   The 'Lyricist(s)/text writer(s)' frame is intended for the writer(s)
-   of the text or lyrics in the recording. They are seperated with the
-   "/" character.
-
-  TLA
-   The 'Language(s)' frame should contain the languages of the text or
-   lyrics in the audio file. The language is represented with three
-   characters according to ISO-639-2. If more than one language is used
-   in the text their language codes should follow according to their
-   usage.
-
-  TCO
-   The content type, which previously (in ID3v1.1, see appendix A) was
-   stored as a one byte numeric value only, is now a numeric string. You
-   may use one or several of the types as ID3v1.1 did or, since the
-   category list would be impossible to maintain with accurate and up to
-   date categories, define your own.
-   References to the ID3v1 genres can be made by, as first byte, enter
-   "(" followed by a number from the genres list (section A.3.) and
-   ended with a ")" character. This is optionally followed by a
-   refinement, e.g. "(21)" or "(4)Eurodisco". Several references can be
-   made in the same frame, e.g. "(51)(39)". If the refinement should
-   begin with a "(" character it should be replaced with "((", e.g. "((I
-   can figure out any genre)" or "(55)((I think...)". The following new
-   content types is defined in ID3v2 and is implemented in the same way
-   as the numerig content types, e.g. "(RX)".
-   
-     RX  Remix
-     CR  Cover
-
-  TAL
-   The 'Album/Movie/Show title' frame is intended for the title of the
-   recording(/source of sound) which the audio in the file is taken from.
-   
-  TPA
-   The 'Part of a set' frame is a numeric string that describes which
-   part of a set the audio came from. This frame is used if the source
-   described in the "TAL" frame is divided into several mediums, e.g. a
-   double CD. The value may be extended with a "/" character and a
-   numeric string containing the total number of parts in the set. E.g.
-   "1/2".
-
-  TRK
-   The 'Track number/Position in set' frame is a numeric string
-   containing the order number of the audio-file on its original
-   recording. This may be extended with a "/" character and a numeric
-   string containing the total numer of tracks/elements on the original
-   recording. E.g. "4/9".
-
-  TRC
-   The 'ISRC' frame should contian the International Standard Recording
-   Code [ISRC].
-
-  TYE
-   The 'Year' frame is a numeric string with a year of the recording.
-   This frames is always four characters long (until the year 10000).
-
-  TDA
-   The 'Date' frame is a numeric string in the DDMM format containing
-   the date for the recording. This field is always four characters
-   long.
-
-  TIM
-   The 'Time' frame is a numeric string in the HHMM format containing
-   the time for the recording. This field is always four characters
-   long.
-   
-  TRD
-   The 'Recording dates' frame is a intended to be used as complement to
-   the "TYE", "TDA" and "TIM" frames. E.g. "4th-7th June, 12th June" in
-   combination with the "TYE" frame.
-
-  TMT
-   The 'Media type' frame describes from which media the sound
-   originated. This may be a textstring or a reference to the predefined
-   media types found in the list below. References are made within "("
-   and ")" and are optionally followed by a text refinement, e.g. "(MC)
-   with four channels". If a text refinement should begin with a "("
-   character it should be replaced with "((" in the same way as in the
-   "TCO" frame. Predefined refinements is appended after the media type,
-   e.g. "(CD/S)" or "(VID/PAL/VHS)".
-
-    DIG    Other digital media
-      /A    Analog transfer from media
-
-    ANA    Other analog media
-      /WAC  Wax cylinder
-      /8CA  8-track tape cassette
-
-    CD     CD
-      /A    Analog transfer from media
-      /DD   DDD
-      /AD   ADD
-      /AA   AAD
-
-    LD     Laserdisc
-      /A     Analog transfer from media
-
-    TT     Turntable records
-      /33    33.33 rpm
-      /45    45 rpm
-      /71    71.29 rpm
-      /76    76.59 rpm
-      /78    78.26 rpm
-      /80    80 rpm
-     
-    MD     MiniDisc
-      /A    Analog transfer from media
-     
-    DAT    DAT
-      /A    Analog transfer from media
-      /1    standard, 48 kHz/16 bits, linear
-      /2    mode 2, 32 kHz/16 bits, linear
-      /3    mode 3, 32 kHz/12 bits, nonlinear, low speed
-      /4    mode 4, 32 kHz/12 bits, 4 channels
-      /5    mode 5, 44.1 kHz/16 bits, linear
-      /6    mode 6, 44.1 kHz/16 bits, 'wide track' play
-     
-    DCC    DCC
-      /A    Analog transfer from media
-    
-    DVD    DVD
-      /A    Analog transfer from media
-    
-    TV     Television
-      /PAL    PAL
-      /NTSC   NTSC
-      /SECAM  SECAM
-    
-    VID    Video
-      /PAL    PAL
-      /NTSC   NTSC
-      /SECAM  SECAM
-      /VHS    VHS
-      /SVHS   S-VHS
-      /BETA   BETAMAX
-    
-    RAD    Radio
-      /FM   FM
-      /AM   AM
-      /LW   LW
-      /MW   MW
-    
-    TEL    Telephone
-      /I    ISDN
-    
-    MC     MC (normal cassette)
-      /4    4.75 cm/s (normal speed for a two sided cassette)
-      /9    9.5 cm/s
-      /I    Type I cassette (ferric/normal)
-      /II   Type II cassette (chrome)
-      /III  Type III cassette (ferric chrome)
-      /IV   Type IV cassette (metal)
-    
-    REE    Reel
-      /9    9.5 cm/s
-      /19   19 cm/s
-      /38   38 cm/s
-      /76   76 cm/s
-      /I    Type I cassette (ferric/normal)
-      /II   Type II cassette (chrome)
-      /III  Type III cassette (ferric chrome)
-      /IV   Type IV cassette (metal)
-
-  TFT
-   The 'File type' frame indicates which type of audio this tag defines.
-   The following type and refinements are defined:
-   
-     MPG    MPEG Audio
-       /1     MPEG 2 layer I
-       /2     MPEG 2 layer II
-       /3     MPEG 2 layer III
-       /2.5   MPEG 2.5
-       /AAC   Advanced audio compression
-     
-   but other types may be used, not for these types though. This is used
-   in a similar way to the predefined types in the "TMT" frame, but
-   without parenthesis. If this frame is not present audio type is
-   assumed to be "MPG".
-
-  TBP
-   BPM is short for beats per minute, and is easily computed by
-   dividing the number of beats in a musical piece with its length. To
-   get a more accurate result, do the BPM calculation on the main-part
-   only. To acquire best result measure the time between each beat and
-   calculate individual BPM for each beat and use the median value as
-   result. BPM is an integer and represented as a numerical string.
-
-  TCR
-   The 'Copyright message' frame, which must begin with a year and a
-   space character (making five characters), is intended for the
-   copyright holder of the original sound, not the audio file itself. The
-   absence of this frame means only that the copyright information is
-   unavailable or has been removed, and must not be interpreted to mean
-   that the sound is public domain. Every time this field is displayed
-   the field must be preceded with "Copyright " (C) " ", where (C) is one
-   character showing a C in a circle.
-
-  TPB
-   The 'Publisher' frame simply contains the name of the label or
-   publisher.
-
-  TEN
-   The 'Encoded by' frame contains the name of the person or
-   organisation that encoded the audio file. This field may contain a
-   copyright message, if the audio file also is copyrighted by the
-   encoder.
-
-  TSS
-   The 'Software/hardware and settings used for encoding' frame
-   includes the used audio encoder and its settings when the file was
-   encoded. Hardware refers to hardware encoders, not the computer on
-   which a program was run.
-
-  TOF
-   The 'Original filename' frame contains the preferred filename for the
-   file, since some media doesn't allow the desired length of the
-   filename. The filename is case sensitive and includes its suffix.
-
-  TLE
-   The 'Length' frame contains the length of the audiofile in
-   milliseconds, represented as a numeric string.
-
-  TSI
-   The 'Size' frame contains the size of the audiofile in bytes
-   excluding the tag, represented as a numeric string.
-
-  TDY
-   The 'Playlist delay' defines the numbers of milliseconds of silence
-   between every song in a playlist. The player should use the "ETC"
-   frame, if present, to skip initial silence and silence at the end of
-   the audio to match the 'Playlist delay' time. The time is represented
-   as a numeric string.
-
-  TKE
-   The 'Initial key' frame contains the musical key in which the sound
-   starts. It is represented as a string with a maximum length of three
-   characters. The ground keys are represented with "A","B","C","D","E",
-   "F" and "G" and halfkeys represented with "b" and "#". Minor is
-   represented as "m". Example "Cbm". Off key is represented with an "o"
-   only.
-
-  TOT
-   The 'Original album/Movie/Show title' frame is intended for the title
-   of the original recording(/source of sound), if for example the music
-   in the file should be a cover of a previously released song.
-   
-  TOA
-   The 'Original artist(s)/performer(s)' frame is intended for the
-   performer(s) of the original recording, if for example the music in
-   the file should be a cover of a previously released song. The
-   performers are seperated with the "/" character.
-
-  TOL
-   The 'Original Lyricist(s)/text writer(s)' frame is intended for the
-   text writer(s) of the original recording, if for example the music in
-   the file should be a cover of a previously released song. The text
-   writers are seperated with the "/" character.
-
-  TOR
-   The 'Original release year' frame is intended for the year when the
-   original recording, if for example the music in the file should be a
-   cover of a previously released song, was released. The field is
-   formatted as in the "TDY" frame.
-
-
-4.2.2.   User defined text information frame
-
-   This frame is intended for one-string text information concerning the
-   audiofile in a similar way to the other "T"xx frames. The frame body
-   consists of a description of the string, represented as a terminated
-   string, followed by the actual string. There may be more than one
-   "TXX" frame in each tag, but only one with the same description.
-
-     User defined...   "TXX"
-     Frame size        $xx xx xx
-     Text encoding     $xx
-     Description       <textstring> $00 (00)
-     Value             <textstring>
-
-
-4.3.   URL link frames
-
-   With these frames dynamic data such as webpages with touring
-   information, price information or plain ordinary news can be added to
-   the tag. There may only be one URL [URL] link frame of its kind in an
-   tag, except when stated otherwise in the frame description. If the
-   textstring is followed by a termination ($00 (00)) all the following
-   information should be ignored and not be displayed. All URL link
-   frames have the following format:
-
-     URL link frame   "W00" - "WZZ" , excluding "WXX" 
-                                      (described in 4.3.2.)
-     Frame size       $xx xx xx
-     URL              <textstring>
-
-
-4.3.1.   URL link frames - details
-
-  WAF
-   The 'Official audio file webpage' frame is a URL pointing at a file
-   specific webpage.
-   
-  WAR
-   The 'Official artist/performer webpage' frame is a URL pointing at
-   the artists official webpage. There may be more than one "WAR" frame
-   in a tag if the audio contains more than one performer.
-   
-  WAS
-   The 'Official audio source webpage' frame is a URL pointing at the
-   official webpage for the source of the audio file, e.g. a movie.
-   
-  WCM
-   The 'Commercial information' frame is a URL pointing at a webpage
-   with information such as where the album can be bought. There may be
-   more than one "WCM" frame in a tag.
-   
-  WCP
-   The 'Copyright/Legal information' frame is a URL pointing at a
-   webpage where the terms of use and ownership of the file is described.
-   
-  WPB
-   The 'Publishers official webpage' frame is a URL pointing at the
-   official wepage for the publisher.
-
-
-4.3.2.   User defined URL link frame
-
-   This frame is intended for URL [URL] links concerning the audiofile in
-   a similar way to the other "W"xx frames. The frame body consists of a
-   description of the string, represented as a terminated string,
-   followed by the actual URL. The URL is always encoded with ISO-8859-1
-   [ISO-8859-1]. There may be more than one "WXX" frame in each tag, but
-   only one with the same description.
-
-     User defined...   "WXX"
-     Frame size        $xx xx xx
-     Text encoding     $xx
-     Description       <textstring> $00 (00)
-     URL               <textstring>
-
-
-4.4.   Involved people list
-
-   Since there might be a lot of people contributing to an audio file in
-   various ways, such as musicians and technicians, the 'Text
-   information frames' are often insufficient to list everyone involved
-   in a project. The 'Involved people list' is a frame containing the
-   names of those involved, and how they were involved. The body simply
-   contains a terminated string with the involvement directly followed by
-   a terminated string with the involvee followed by a new involvement
-   and so on. There may only be one "IPL" frame in each tag.
-
-     Involved people list   "IPL"
-     Frame size             $xx xx xx
-     Text encoding          $xx
-     People list strings    <textstrings>
-
-
-4.5.   Music CD Identifier
-
-   This frame is intended for music that comes from a CD, so that the CD
-   can be identified in databases such as the CDDB [CDDB]. The frame
-   consists of a binary dump of the Table Of Contents, TOC,  from the CD,
-   which is a header of 4 bytes and then 8 bytes/track on the CD making a
-   maximum of 804 bytes. This frame requires a present and valid "TRK"
-   frame. There may only be one "MCI" frame in each tag.
-
-     Music CD identifier   "MCI"
-     Frame size            $xx xx xx
-     CD TOC                <binary data>
-
-
-4.6.   Event timing codes
-
-   This frame allows synchronisation with key events in a song or sound.
-   The head is:
-
-     Event timing codes   "ETC"
-     Frame size           $xx xx xx
-     Time stamp format    $xx
-     
-   Where time stamp format is:
-     
-     $01  Absolute time, 32 bit sized, using MPEG [MPEG] frames as unit
-     $02  Absolute time, 32 bit sized, using milliseconds as unit
-
-   Abolute time means that every stamp contains the time from the
-   beginning of the file.
-
-   Followed by a list of key events in the following format:
-
-     Type of event   $xx
-     Time stamp      $xx (xx ...)
-
-   The 'Time stamp' is set to zero if directly at the beginning of the
-   sound or after the previous event. All events should be sorted in
-   chronological order. The type of event is as follows:
-
-     $00  padding (has no meaning)
-     $01  end of initial silence
-     $02  intro start
-     $03  mainpart start
-     $04  outro start
-     $05  outro end
-     $06  verse begins
-     $07  refrain begins
-     $08  interlude
-     $09  theme start
-     $0A  variation
-     $0B  key change
-     $0C  time change
-     $0D  unwanted noise (Snap, Crackle &amp; Pop)
-
-     $0E-$DF  reserved for future use
-
-     $E0-$EF  not predefined sync 0-F
-
-     $F0-$FC  reserved for future use
-
-     $FD  audio end (start of silence)
-     $FE  audio file ends
-     $FF  one more byte of events follows (all the following bytes with
-          the value $FF have the same function)
-
-   The 'Not predefined sync's ($E0-EF) are for user events. You might
-   want to synchronise your music to something, like setting of an
-   explosion on-stage, turning on your screensaver etc.
-
-   There may only be one "ETC" frame in each tag.
-
-
-4.7.   MPEG location lookup table
-
-   To increase performance and accuracy of jumps within a MPEG [MPEG]
-   audio file, frames with timecodes in different locations in the file
-   might be useful. The ID3 frame includes references that the software
-   can use to calculate positions in the file. After the frame header is
-   a descriptor of how much the 'frame counter' should increase for every
-   reference. If this value is two then the first reference points out
-   the second frame, the 2nd reference the 4th frame, the 3rd reference
-   the 6th frame etc. In a similar way the 'bytes between reference' and
-   'milliseconds between reference' points out bytes and milliseconds
-   respectively.
-   
-   Each reference consists of two parts; a certain number of bits, as
-   defined in 'bits for bytes deviation', that describes the difference
-   between what is said in 'bytes between reference' and the reality and
-   a certain number of bits, as defined in 'bits for milliseconds
-   deviation', that describes the difference between what is said in
-   'milliseconds between reference' and the reality. The number of bits
-   in every reference, i.e. 'bits for bytes deviation'+'bits for
-   milliseconds deviation', must be a multiple of four. There may only be
-   one "MLL" frame in each tag.
-   
-     Location lookup table          "MLL"
-     ID3 frame size                 $xx xx xx
-     MPEG frames between reference  $xx xx
-     Bytes between reference        $xx xx xx
-     Milliseconds between reference $xx xx xx
-     Bits for bytes deviation       $xx
-     Bits for milliseconds dev.     $xx
-
-   Then for every reference the following data is included;
-
-     Deviation in bytes         %xxx....
-     Deviation in milliseconds  %xxx....
-
-
-4.8.   Synced tempo codes
-
-   For a more accurate description of the tempo of a musical piece this
-   frame might be used. After the header follows one byte describing
-   which time stamp format should be used. Then follows one or more tempo
-   codes. Each tempo code consists of one tempo part and one time part.
-   The tempo is in BPM described with one or two bytes. If the first byte
-   has the value $FF, one more byte follows, which is added to the first
-   giving a range from 2 - 510 BPM, since $00 and $01 is reserved. $00 is
-   used to describe a beat-free time period, which is not the same as a
-   music-free time period. $01 is used to indicate one single beat-stroke
-   followed by a beat-free period.
-
-   The tempo descriptor is followed by a time stamp. Every time the tempo
-   in the music changes, a tempo descriptor may indicate this for the
-   player. All tempo descriptors should be sorted in chronological order.
-   The first beat-stroke in a time-period is at the same time as the beat
-   description occurs. There may only be one "STC" frame in each tag.
-
-     Synced tempo codes  "STC"
-     Frame size          $xx xx xx
-     Time stamp format   $xx
-     Tempo data          <binary data>
-
-   Where time stamp format is:
-     
-     $01  Absolute time, 32 bit sized, using MPEG [MPEG] frames as unit
-     $02  Absolute time, 32 bit sized, using milliseconds as unit
-
-   Abolute time means that every stamp contains the time from the
-   beginning of the file.
-
-
-4.9.   Unsychronised lyrics/text transcription
-
-   This frame contains the lyrics of the song or a text transcription of
-   other vocal activities. The head includes an encoding descriptor and
-   a content descriptor. The body consists of the actual text. The
-   'Content descriptor' is a terminated string. If no descriptor is
-   entered, 'Content descriptor' is $00 (00) only. Newline characters
-   are allowed in the text. Maximum length for the descriptor is 64
-   bytes. There may be more than one lyrics/text frame in each tag, but
-   only one with the same language and content descriptor.
-
-     Unsynced lyrics/text "ULT"
-     Frame size           $xx xx xx
-     Text encoding        $xx
-     Language             $xx xx xx
-     Content descriptor   <textstring> $00 (00)
-     Lyrics/text          <textstring>
-
-
-4.10.   Synchronised lyrics/text
-
-   This is another way of incorporating the words, said or sung lyrics,
-   in the audio file as text, this time, however, in sync with the audio.
-   It might also be used to describing events e.g. occurring on a stage
-   or on the screen in sync with the audio. The header includes a content
-   descriptor, represented with as terminated textstring. If no
-   descriptor is entered, 'Content descriptor' is $00 (00) only.
-
-     Synced lyrics/text   "SLT"
-     Frame size           $xx xx xx
-     Text encoding        $xx
-     Language             $xx xx xx
-     Time stamp format    $xx
-     Content type         $xx
-     Content descriptor   <textstring> $00 (00)
-
-
-   Encoding:   $00  ISO-8859-1 [ISO-8859-1] character set is used => $00
-                    is sync identifier.
-               $01  Unicode [UNICODE] character set is used => $00 00 is
-                    sync identifier.
-
-   Content type:   $00 is other
-                   $01 is lyrics
-                   $02 is text transcription
-                   $03 is movement/part name (e.g. "Adagio")
-                   $04 is events (e.g. "Don Quijote enters the stage")
-                   $05 is chord (e.g. "Bb F Fsus")
-
-   Time stamp format is:
-     
-     $01  Absolute time, 32 bit sized, using MPEG [MPEG] frames as unit
-     $02  Absolute time, 32 bit sized, using milliseconds as unit
-
-   Abolute time means that every stamp contains the time from the
-   beginning of the file.
-
-   The text that follows the frame header differs from that of the
-   unsynchronised lyrics/text transcription in one major way. Each
-   syllable (or whatever size of text is considered to be convenient by
-   the encoder) is a null terminated string followed by a time stamp
-   denoting where in the sound file it belongs. Each sync thus has the
-   following structure:
-
-     Terminated text to be synced (typically a syllable)
-     Sync identifier (terminator to above string)   $00 (00)
-     Time stamp                                     $xx (xx ...)
-
-   The 'time stamp' is set to zero or the whole sync is omitted if
-   located directly at the beginning of the sound. All time stamps should
-   be sorted in chronological order. The sync can be considered as a
-   validator of the subsequent string.
-
-   Newline characters are allowed in all "SLT" frames and should be used
-   after every entry (name, event etc.) in a frame with the content type
-   $03 - $04.
-
-   A few considerations regarding whitespace characters: Whitespace
-   separating words should mark the beginning of a new word, thus
-   occurring in front of the first syllable of a new word. This is also
-   valid for new line characters. A syllable followed by a comma should
-   not be broken apart with a sync (both the syllable and the comma
-   should be before the sync).
-
-   An example: The "ULT" passage
-
-     "Strangers in the night" $0A "Exchanging glances"
-
-   would be "SLT" encoded as:
-
-     "Strang" $00 xx xx "ers" $00 xx xx " in" $00 xx xx " the" $00 xx xx
-     " night" $00 xx xx 0A "Ex" $00 xx xx "chang" $00 xx xx "ing" $00 xx
-     xx "glan" $00 xx xx "ces" $00 xx xx
-
-   There may be more than one "SLT" frame in each tag, but only one with
-   the same language and content descriptor.
-
-
-4.11.   Comments
-
-   This frame replaces the old 30-character comment field in ID3v1. It
-   consists of a frame head followed by encoding, language and content
-   descriptors and is ended with the actual comment as a text string.
-   Newline characters are allowed in the comment text string. There may
-   be more than one comment frame in each tag, but only one with the same
-   language and content descriptor.
-
-     Comment                   "COM"
-     Frame size                $xx xx xx
-     Text encoding             $xx
-     Language                  $xx xx xx
-     Short content description <textstring> $00 (00)
-     The actual text           <textstring>
-
-
-4.12.   Relative volume adjustment
-
-   This is a more subjective function than the previous ones. It allows
-   the user to say how much he wants to increase/decrease the volume on
-   each channel while the file is played. The purpose is to be able to
-   align all files to a reference volume, so that you don't have to
-   change the volume constantly. This frame may also be used to balance
-   adjust the audio. If the volume peak levels are known then this could
-   be described with the 'Peak volume right' and 'Peak volume left'
-   field. If Peakvolume is not known these fields could be left zeroed
-   or completely omitted.  There may only be one "RVA" frame in each
-   tag.
-
-     Relative volume adjustment    "RVA"
-     Frame size                    $xx xx xx
-     Increment/decrement           %000000xx
-     Bits used for volume descr.   $xx
-     Relative volume change, right $xx xx (xx ...)
-     Relative volume change, left  $xx xx (xx ...)
-     Peak volume right             $xx xx (xx ...)
-     Peak volume left              $xx xx (xx ...)
-
-   In the increment/decrement field bit 0 is used to indicate the right
-   channel and bit 1 is used to indicate the left channel. 1 is
-   increment and 0 is decrement.
-
-   The 'bits used for volume description' field is normally $10 (16 bits)
-   for MPEG 2 layer I, II and III [MPEG] and MPEG 2.5. This value may not
-   be $00. The volume is always represented with whole bytes, padded in
-   the beginning (highest bits) when 'bits used for volume description'
-   is not a multiple of eight.
-
-
-4.13.   Equalisation
-
-   This is another subjective, alignment frame. It allows the user to
-   predefine an equalisation curve within the audio file. There may only
-   be one "EQU" frame in each tag.
-
-     Equalisation       "EQU"
-     Frame size         $xx xx xx
-     Adjustment bits    $xx
-
-   The 'adjustment bits' field defines the number of bits used for
-   representation of the adjustment. This is normally $10 (16 bits) for
-   MPEG 2 layer I, II and III [MPEG] and MPEG 2.5. This value may not be
-   $00.
-
-   This is followed by 2 bytes + ('adjustment bits' rounded up to the
-   nearest byte) for every equalisation band in the following format,
-   giving a frequency range of 0 - 32767Hz:
-
-     Increment/decrement   %x (MSB of the Frequency)
-     Frequency             (lower 15 bits)
-     Adjustment            $xx (xx ...)
-
-   The increment/decrement bit is 1 for increment and 0 for decrement.
-   The equalisation bands should be ordered increasingly with reference
-   to frequency. All frequencies don't have to be declared. Adjustments
-   with the value $00 should be omitted. A frequency should only be
-   described once in the frame.
-
-
-4.14.   Reverb
-
-   Yet another subjective one. You may here adjust echoes of different
-   kinds. Reverb left/right is the delay between every bounce in ms.
-   Reverb bounces left/right is the number of bounces that should be
-   made. $FF equals an infinite number of bounces. Feedback is the amount
-   of volume that should be returned to the next echo bounce. $00 is 0%,
-   $FF is 100%. If this value were $7F, there would be 50% volume
-   reduction on the first bounce, yet 50% on the second and so on. Left
-   to left means the sound from the left bounce to be played in the left
-   speaker, while left to right means sound from the left bounce to be
-   played in the right speaker.
-
-   'Premix left to right' is the amount of left sound to be mixed in the
-   right before any reverb is applied, where $00 id 0% and $FF is 100%.
-   'Premix right to left' does the same thing, but right to left. Setting
-   both premix to $FF would result in a mono output (if the reverb is
-   applied symmetric). There may only be one "REV" frame in each tag.
-
-     Reverb settings                  "REV"
-     Frame size                       $00 00 0C
-     Reverb left (ms)                 $xx xx
-     Reverb right (ms)                $xx xx
-     Reverb bounces, left             $xx
-     Reverb bounces, right            $xx
-     Reverb feedback, left to left    $xx
-     Reverb feedback, left to right   $xx
-     Reverb feedback, right to right  $xx
-     Reverb feedback, right to left   $xx
-     Premix left to right             $xx
-     Premix right to left             $xx
-
-
-4.15.   Attached picture
-
-   This frame contains a picture directly related to the audio file.
-   Image format is preferably "PNG" [PNG] or "JPG" [JFIF]. Description
-   is a short description of the picture, represented as a terminated
-   textstring. The description has a maximum length of 64 characters,
-   but may be empty. There may be several pictures attached to one file,
-   each in their individual "PIC" frame, but only one with the same
-   content descriptor. There may only be one picture with the picture
-   type declared as picture type $01 and $02 respectively. There is a
-   possibility to put only a link to the image file by using the 'image
-   format' "-->" and having a complete URL [URL] instead of picture data.
-   The use of linked files should however be used restrictively since
-   there is the risk of separation of files.
-
-     Attached picture   "PIC"
-     Frame size         $xx xx xx
-     Text encoding      $xx
-     Image format       $xx xx xx
-     Picture type       $xx
-     Description        <textstring> $00 (00)
-     Picture data       <binary data>
-
-
-   Picture type:  $00  Other
-                  $01  32x32 pixels 'file icon' (PNG only)
-                  $02  Other file icon
-                  $03  Cover (front)
-                  $04  Cover (back)
-                  $05  Leaflet page
-                  $06  Media (e.g. lable side of CD)
-                  $07  Lead artist/lead performer/soloist
-                  $08  Artist/performer
-                  $09  Conductor
-                  $0A  Band/Orchestra
-                  $0B  Composer
-                  $0C  Lyricist/text writer
-                  $0D  Recording Location
-                  $0E  During recording
-                  $0F  During performance
-                  $10  Movie/video screen capture
-                  $11  A bright coloured fish
-                  $12  Illustration
-                  $13  Band/artist logotype
-                  $14  Publisher/Studio logotype
-
-
-4.16.   General encapsulated object
-
-   In this frame any type of file can be encapsulated. After the header,
-   'Frame size' and 'Encoding' follows 'MIME type' [MIME] and 'Filename'
-   for the encapsulated object, both represented as terminated strings
-   encoded with ISO 8859-1 [ISO-8859-1]. The filename is case sensitive.
-   Then follows a content description as terminated string, encoded as
-   'Encoding'. The last thing in the frame is the actual object. The
-   first two strings may be omitted, leaving only their terminations.
-   MIME type is always an ISO-8859-1 text string. There may be more than
-   one "GEO" frame in each tag, but only one with the same content
-   descriptor.
-
-     General encapsulated object "GEO"
-     Frame size                  $xx xx xx
-     Text encoding               $xx
-     MIME type                   <textstring> $00
-     Filename                    <textstring> $00 (00)
-     Content description         <textstring> $00 (00)
-     Encapsulated object         <binary data>
-
-
-4.17.   Play counter
-
-   This is simply a counter of the number of times a file has been
-   played. The value is increased by one every time the file begins to
-   play. There may only be one "CNT" frame in each tag. When the counter
-   reaches all one's, one byte is inserted in front of the counter thus
-   making the counter eight bits bigger.  The counter must be at least
-   32-bits long to begin with.
-
-     Play counter   "CNT"
-     Frame size     $xx xx xx
-     Counter        $xx xx xx xx (xx ...)
-
-
-4.18.   Popularimeter
-
-   The purpose of this frame is to specify how good an audio file is.
-   Many interesting applications could be found to this frame such as a
-   playlist that features better audiofiles more often than others or it
-   could be used to profile a persons taste and find other 'good' files
-   by comparing people's profiles. The frame is very simple. It contains
-   the email address to the user, one rating byte and a four byte play
-   counter, intended to be increased with one for every time the file is
-   played. The email is a terminated string. The rating is 1-255 where
-   1 is worst and 255 is best. 0 is unknown. If no personal counter is
-   wanted it may be omitted.  When the counter reaches all one's, one
-   byte is inserted in front of the counter thus making the counter
-   eight bits bigger in the same away as the play counter ("CNT").
-   There may be more than one "POP" frame in each tag, but only one with
-   the same email address.
-   
-     Popularimeter   "POP"
-     Frame size      $xx xx xx
-     Email to user   <textstring> $00
-     Rating          $xx
-     Counter         $xx xx xx xx (xx ...)
-
-
-4.19.   Recommended buffer size
-
-   Sometimes the server from which a audio file is streamed is aware of
-   transmission or coding problems resulting in interruptions in the
-   audio stream. In these cases, the size of the buffer can be
-   recommended by the server using this frame. If the 'embedded info
-   flag' is true (1) then this indicates that an ID3 tag with the
-   maximum size described in 'Buffer size' may occur in the audiostream.
-   In such case the tag should reside between two MPEG [MPEG] frames, if
-   the audio is MPEG encoded. If the position of the next tag is known,
-   'offset to next tag' may be used. The offset is calculated from the
-   end of tag in which this frame resides to the first byte of the header
-   in the next. This field may be omitted. Embedded tags is currently not
-   recommended since this could render unpredictable behaviour from
-   present software/hardware. The 'Buffer size' should be kept to a
-   minimum. There may only be one "BUF" frame in each tag.
-
-     Recommended buffer size   "BUF"
-     Frame size                $xx xx xx
-     Buffer size               $xx xx xx
-     Embedded info flag        %0000000x
-     Offset to next tag        $xx xx xx xx
-
-
-4.20.   Encrypted meta frame
-
-   This frame contains one or more encrypted frames. This enables
-   protection of copyrighted information such as pictures and text, that
-   people might want to pay extra for. Since standardisation of such an
-   encryption scheme is beyond this document, all "CRM" frames begin with
-   a terminated string with a URL [URL] containing an email address, or a
-   link to a location where an email adress can be found, that belongs to
-   the organisation responsible for this specific encrypted meta frame.
-
-   Questions regarding the encrypted frame should be sent to the
-   indicated email address. If a $00 is found directly after the 'Frame
-   size', the whole frame should be ignored, and preferably be removed.
-   The 'Owner identifier' is then followed by a short content description
-   and explanation as to why it's encrypted. After the
-   'content/explanation' description, the actual encrypted block follows.
-
-   When an ID3v2 decoder encounters a "CRM" frame, it should send the
-   datablock to the 'plugin' with the corresponding 'owner identifier'
-   and expect to receive either a datablock with one or several ID3v2
-   frames after each other or an error. There may be more than one "CRM"
-   frames in a tag, but only one with the same 'owner identifier'.
-
-     Encrypted meta frame  "CRM"
-     Frame size            $xx xx xx
-     Owner identifier      <textstring> $00 (00)
-     Content/explanation   <textstring> $00 (00)
-     Encrypted datablock   <binary data>
-
-
-4.21.   Audio encryption
-
-   This frame indicates if the actual audio stream is encrypted, and by
-   whom. Since standardisation of such encrypion scheme is beyond this
-   document, all "CRA" frames begin with a terminated string with a
-   URL containing an email address, or a link to a location where an
-   email address can be found, that belongs to the organisation
-   responsible for this specific encrypted audio file. Questions
-   regarding the encrypted audio should be sent to the email address
-   specified. If a $00 is found directly after the 'Frame size' and the
-   audiofile indeed is encrypted, the whole file may be considered
-   useless.
-
-   After the 'Owner identifier', a pointer to an unencrypted part of the
-   audio can be specified. The 'Preview start' and 'Preview length' is
-   described in frames. If no part is unencrypted, these fields should be
-   left zeroed. After the 'preview length' field follows optionally a
-   datablock required for decryption of the audio. There may be more than
-   one "CRA" frames in a tag, but only one with the same 'Owner
-   identifier'.
-
-     Audio encryption   "CRA"
-     Frame size         $xx xx xx
-     Owner identifier   <textstring> $00 (00)
-     Preview start      $xx xx
-     Preview length     $xx xx
-     Encryption info    <binary data>
-
-
-4.22.   Linked information
-
-   To keep space waste as low as possible this frame may be used to link
-   information from another ID3v2 tag that might reside in another audio
-   file or alone in a binary file. It is recommended that this method is
-   only used when the files are stored on a CD-ROM or other circumstances
-   when the risk of file seperation is low. The frame contains a frame
-   identifier, which is the frame that should be linked into this tag, a
-   URL [URL] field, where a reference to the file where the frame is
-   given, and additional ID data, if needed. Data should be retrieved
-   from the first tag found in the file to which this link points. There
-   may be more than one "LNK" frame in a tag, but only one with the same
-   contents. A linked frame is to be considered as part of the tag and
-   has the same restrictions as if it was a physical part of the tag
-   (i.e. only one "REV" frame allowed, whether it's linked or not).
-   
-     Linked information  "LNK"
-     Frame size          $xx xx xx
-     Frame identifier    $xx xx xx
-     URL                 <textstring> $00 (00)
-     Additional ID data  <textstring(s)>
-   
-   Frames that may be linked and need no additional data are "IPL",
-   "MCI", "ETC", "LLT", "STC", "RVA", "EQU", "REV", "BUF", the text
-   information frames and the URL link frames.
-   
-   The "TXX", "PIC", "GEO", "CRM" and "CRA" frames may be linked with the
-   content descriptor as additional ID data.
-   
-   The "COM", "SLT" and "ULT" frames may be linked with three bytes of
-   language descriptor directly followed by a content descriptor as
-   additional ID data.
-
-
-5.   The 'unsynchronisation scheme'
-
-   The only purpose of the 'unsychronisation scheme' is to make the ID3v2
-   tag as compatible as possible with existing software. There is no use
-   in 'unsynchronising' tags if the file is only to be processed by new
-   software. Unsynchronisation may only be made with MPEG 2 layer I, II
-   and III and MPEG 2.5 files.
-
-   Whenever a false synchronisation is found within the tag, one zeroed
-   byte is inserted after the first false synchronisation byte. The
-   format of a correct sync that should be altered by ID3 encoders is as
-   follows:
-
-         %11111111 111xxxxx
-
-   And should be replaced with:
-
-         %11111111 00000000 111xxxxx
-
-   This has the side effect that all $FF 00 combinations have to be
-   altered, so they won't be affected by the decoding process. Therefore
-   all the $FF 00 combinations have to be replaced with the $FF 00 00
-   combination during the unsynchonisation.
-
-   To indicate usage of the unsynchronisation, the first bit in 'ID3
-   flags' should be set. This bit should only be set if the tag
-   contained a, now corrected, false synchronisation. The bit should
-   only be clear if the tag does not contain any false synchronisations.
-   
-   Do bear in mind, that if a compression scheme is used by the encoder,
-   the unsyncronisation scheme should be applied *afterwards*. When
-   decoding a compressed, 'unsyncronised' file, the 'unsyncronisation
-   scheme' should be parsed first, compression afterwards.
-
-
-6.   Copyright
-
-   Copyright (C) Martin Nilsson 1998. All Rights Reserved.
-
-   This document and translations of it may be copied and furnished to
-   others, and derivative works that comment on or otherwise explain it
-   or assist in its implementation may be prepared, copied, published
-   and distributed, in whole or in part, without restriction of any
-   kind, provided that a reference to this document is included on all
-   such copies and derivative works. However, this document itself may
-   not be modified in any way and reissued as the original document.
-
-   The limited permissions granted above are perpetual and will not be
-   revoked.
-
-   This document and the information contained herein is provided on an
-   "AS IS" basis and THE AUTHORS DISCLAIMS ALL WARRANTIES, EXPRESS OR
-   IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
-   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
-   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
-
-
-7.   References
-
-   [CDDB] Compact Disc Data Base
-
-      http://www.cddb.com
-
-   [ISO-639-2] ISO/FDIS 639-2.
-   Codes for the representation of names of languages, Part 2: Alpha-3
-   code. Technical committee / subcommittee: TC 37 / SC 2
-
-   [ISO-8859-1] ISO/IEC DIS 8859-1.
-   8-bit single-byte coded graphic character sets, Part 1: Latin
-   alphabet No. 1. Technical committee / subcommittee: JTC 1 / SC 2
-
-   [ISRC] ISO 3901:1986
-   International Standard Recording Code (ISRC).
-   Technical committee / subcommittee: TC 46 / SC 9
-
-   [JFIF] JPEG File Interchange Format, version 1.02
-
-      http://www.w3.org/Graphics/JPEG/jfif.txt
-      
-   [MIME] Freed, N.  and N. Borenstein,  "Multipurpose Internet Mail
-   Extensions (MIME) Part One: Format of Internet Message Bodies",
-   RFC 2045, November 1996.
- 
-      ftp://ftp.isi.edu/in-notes/rfc2045.txt
-      
-   [MPEG] ISO/IEC 11172-3:1993.
-   Coding of moving pictures and associated audio for digital storage
-   media at up to about 1,5 Mbit/s, Part 3: Audio.
-   Technical committee / subcommittee: JTC 1 / SC 29
-   and   
-   ISO/IEC 13818-3:1995
-   Generic coding of moving pictures and associated audio information,
-   Part 3: Audio.
-   Technical committee / subcommittee: JTC 1 / SC 29
-   and   
-   ISO/IEC DIS 13818-3
-   Generic coding of moving pictures and associated audio information,
-   Part 3: Audio (Revision of ISO/IEC 13818-3:1995)
-
-
-   [PNG] Portable Network Graphics, version 1.0
-
-      http://www.w3.org/TR/REC-png-multi.html
-
-   [UNICODE] ISO/IEC 10646-1:1993.
-   Universal Multiple-Octet Coded Character Set (UCS), Part 1:
-   Architecture and Basic Multilingual Plane. Technical committee
-   / subcommittee: JTC 1 / SC 2
-
-      http://www.unicode.org/
-
-   [URL] T. Berners-Lee, L. Masinter &amp; M. McCahill, "Uniform Resource
-   Locators (URL).", RFC 1738, December 1994.
-
-      ftp://ftp.isi.edu/in-notes/rfc1738.txt
-
-
-8.   Appendix
-
-
-A.   Appendix A - ID3-Tag Specification V1.1
-
-   ID3-Tag Specification V1.1 (12 dec 1997) by Michael Mutschler
-   <amiga2@info2.rus.uni-stuttgart.de>, edited for space and clarity
-   reasons.
-
-
-A.1.   Overview
-
-   The ID3-Tag is an information field for MPEG Layer 3 audio files.
-   Since a standalone MP3 doesn't provide a method of storing other
-   information than those directly needed for replay reasons, the
-   ID3-tag was invented by Eric Kemp in 1996.
-
-   A revision from ID3v1 to ID3v1.1 was made by Michael Mutschler to
-   support track number information is described in A.4.
-
-
-A.2.   ID3v1 Implementation
-
-   The Information is stored in the last 128 bytes of an MP3. The Tag
-   has got the following fields, and the offsets given here, are from
-   0-127.
-
-     Field      Length    Offsets
-     Tag        3           0-2
-     Songname   30          3-32
-     Artist     30         33-62
-     Album      30         63-92
-     Year       4          93-96
-     Comment    30         97-126
-     Genre      1           127
-
-
-   The string-fields contain ASCII-data, coded in ISO-Latin 1 codepage.
-   Strings which are smaller than the field length are padded with zero-
-   bytes.
-
-     Tag: The tag is valid if this field contains the string "TAG". This
-        has to be uppercase!
-
-     Songname: This field contains the title of the MP3 (string as
-        above).
-
-     Artist: This field contains the artist of the MP3 (string as above).
-
-     Album: this field contains the album where the MP3 comes from
-        (string as above).
-
-     Year: this field contains the year when this song has originally
-        been released (string as above).
-
-     Comment: this field contains a comment for the MP3 (string as
-        above). Revision to this field has been made in ID3v1.1. See
-        A.4.
-
-     Genre: this byte contains the offset of a genre in a predefined
-        list the byte is treated as an unsigned byte. The offset is
-        starting from 0. See A.3.
-
-
-A.3.   Genre List
-
-   The following genres is defined in ID3v1 
-
-      0.Blues
-      1.Classic Rock
-      2.Country
-      3.Dance
-      4.Disco
-      5.Funk
-      6.Grunge
-      7.Hip-Hop
-      8.Jazz
-      9.Metal
-     10.New Age
-     11.Oldies
-     12.Other
-     13.Pop
-     14.R&amp;B
-     15.Rap
-     16.Reggae
-     17.Rock
-     18.Techno
-     19.Industrial
-     20.Alternative
-     21.Ska
-     22.Death Metal
-     23.Pranks
-     24.Soundtrack
-     25.Euro-Techno
-     26.Ambient
-     27.Trip-Hop
-     28.Vocal
-     29.Jazz+Funk
-     30.Fusion
-     31.Trance
-     32.Classical
-     33.Instrumental
-     34.Acid
-     35.House
-     36.Game
-     37.Sound Clip
-     38.Gospel
-     39.Noise
-     40.AlternRock
-     41.Bass
-     42.Soul
-     43.Punk
-     44.Space
-     45.Meditative
-     46.Instrumental Pop
-     47.Instrumental Rock
-     48.Ethnic
-     49.Gothic
-     50.Darkwave
-     51.Techno-Industrial
-     52.Electronic
-     53.Pop-Folk
-     54.Eurodance
-     55.Dream
-     56.Southern Rock
-     57.Comedy
-     58.Cult
-     59.Gangsta
-     60.Top 40
-     61.Christian Rap
-     62.Pop/Funk
-     63.Jungle
-     64.Native American
-     65.Cabaret
-     66.New Wave
-     67.Psychadelic
-     68.Rave
-     69.Showtunes
-     70.Trailer
-     71.Lo-Fi
-     72.Tribal
-     73.Acid Punk
-     74.Acid Jazz
-     75.Polka
-     76.Retro
-     77.Musical
-     78.Rock &amp; Roll
-     79.Hard Rock
-     
-   The following genres are Winamp extensions
-     
-     80.Folk
-     81.Folk-Rock
-     82.National Folk
-     83.Swing
-     84.Fast Fusion
-     85.Bebob
-     86.Latin
-     87.Revival
-     88.Celtic
-     89.Bluegrass
-     90.Avantgarde
-     91.Gothic Rock
-     92.Progressive Rock
-     93.Psychedelic Rock
-     94.Symphonic Rock
-     95.Slow Rock
-     96.Big Band
-     97.Chorus
-     98.Easy Listening
-     99.Acoustic
-    100.Humour
-    101.Speech
-    102.Chanson
-    103.Opera
-    104.Chamber Music
-    105.Sonata
-    106.Symphony
-    107.Booty Bass
-    108.Primus
-    109.Porn Groove
-    110.Satire
-    111.Slow Jam
-    112.Club
-    113.Tango
-    114.Samba
-    115.Folklore
-    116.Ballad
-    117.Power Ballad
-    118.Rhythmic Soul
-    119.Freestyle
-    120.Duet
-    121.Punk Rock
-    122.Drum Solo
-    123.A capella
-    124.Euro-House
-    125.Dance Hall
-
-
-A.4.   Track addition - ID3v1.1
-
-   In ID3v1.1, Michael Mutschler revised the specification of the
-   comment field in order to implement the track number. The new format
-   of the comment field is a 28 character string followed by a mandatory
-   null ($00) character and the original album tracknumber stored as an
-   unsigned byte-size integer. In such cases where the 29th byte is not
-   the null character or when the 30th is a null character, the
-   tracknumber is to be considered undefined.
-
-
-9.   Author's Address
-
-   Martin Nilsson
-   Rydsv�gen 246 C. 30
-   S-584 34 Link�ping
-   Sweden
-
-   Email: nilsson@id3.org
-
-   Co-authors:
-
-   Johan Sundstr�m   Email: johan@id3.org