grpc 1.51.0-x86_64-linux → 1.52.0-x86_64-linux

data/third_party/abseil-cpp/absl/strings/internal/cord_rep_btree.cc

@@ -1,1228 +0,0 @@
-// Copyright 2021 The Abseil Authors
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-//     https://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-
-#include "absl/strings/internal/cord_rep_btree.h"
-
-#include <cassert>
-#include <cstdint>
-#include <iostream>
-#include <string>
-
-#include "absl/base/attributes.h"
-#include "absl/base/config.h"
-#include "absl/base/internal/raw_logging.h"
-#include "absl/strings/internal/cord_data_edge.h"
-#include "absl/strings/internal/cord_internal.h"
-#include "absl/strings/internal/cord_rep_consume.h"
-#include "absl/strings/internal/cord_rep_flat.h"
-#include "absl/strings/str_cat.h"
-#include "absl/strings/string_view.h"
-
-namespace absl {
-ABSL_NAMESPACE_BEGIN
-namespace cord_internal {
-
-#ifdef ABSL_INTERNAL_NEED_REDUNDANT_CONSTEXPR_DECL
-constexpr size_t CordRepBtree::kMaxCapacity;
-#endif
-
-namespace {
-
-using NodeStack = CordRepBtree * [CordRepBtree::kMaxDepth];
-using EdgeType = CordRepBtree::EdgeType;
-using OpResult = CordRepBtree::OpResult;
-using CopyResult = CordRepBtree::CopyResult;
-
-constexpr auto kFront = CordRepBtree::kFront;
-constexpr auto kBack = CordRepBtree::kBack;
-
-inline bool exhaustive_validation() {
-  return cord_btree_exhaustive_validation.load(std::memory_order_relaxed);
-}
-
-// Implementation of the various 'Dump' functions.
-// Prints the entire tree structure or 'rep'. External callers should
-// not specify 'depth' and leave it to its default (0) value.
-// Rep may be a CordRepBtree tree, or a SUBSTRING / EXTERNAL / FLAT node.
-void DumpAll(const CordRep* rep, bool include_contents, std::ostream& stream,
-             int depth = 0) {
-  // Allow for full height trees + substring -> flat / external nodes.
-  assert(depth <= CordRepBtree::kMaxDepth + 2);
-  std::string sharing = const_cast<CordRep*>(rep)->refcount.IsOne()
-                            ? std::string("Private")
-                            : absl::StrCat("Shared(", rep->refcount.Get(), ")");
-  std::string sptr = absl::StrCat("0x", absl::Hex(rep));
-
-  // Dumps the data contents of `rep` if `include_contents` is true.
-  // Always emits a new line character.
-  auto maybe_dump_data = [&stream, include_contents](const CordRep* r) {
-    if (include_contents) {
-      // Allow for up to 60 wide display of content data, which with some
-      // indentation and prefix / labels keeps us within roughly 80-100 wide.
-      constexpr size_t kMaxDataLength = 60;
-      stream << ", data = \""
-             << EdgeData(r).substr(0, kMaxDataLength)
-             << (r->length > kMaxDataLength ? "\"..." : "\"");
-    }
-    stream << '\n';
-  };
-
-  // For each level, we print the 'shared/private' state and the rep pointer,
-  // indented by two spaces per recursive depth.
-  stream << std::string(depth * 2, ' ') << sharing << " (" << sptr << ") ";
-
-  if (rep->IsBtree()) {
-    const CordRepBtree* node = rep->btree();
-    std::string label =
-        node->height() ? absl::StrCat("Node(", node->height(), ")") : "Leaf";
-    stream << label << ", len = " << node->length
-           << ", begin = " << node->begin() << ", end = " << node->end()
-           << "\n";
-    for (CordRep* edge : node->Edges()) {
-      DumpAll(edge, include_contents, stream, depth + 1);
-    }
-  } else if (rep->tag == SUBSTRING) {
-    const CordRepSubstring* substring = rep->substring();
-    stream << "Substring, len = " << rep->length
-           << ", start = " << substring->start;
-    maybe_dump_data(rep);
-    DumpAll(substring->child, include_contents, stream, depth + 1);
-  } else if (rep->tag >= FLAT) {
-    stream << "Flat, len = " << rep->length
-           << ", cap = " << rep->flat()->Capacity();
-    maybe_dump_data(rep);
-  } else if (rep->tag == EXTERNAL) {
-    stream << "Extn, len = " << rep->length;
-    maybe_dump_data(rep);
-  }
-}
-
-// TODO(b/192061034): add 'bytes to copy' logic to avoid large slop on substring
-// small data out of large reps, and general efficiency of 'always copy small
-// data'. Consider making this a cord rep internal library function.
-CordRepSubstring* CreateSubstring(CordRep* rep, size_t offset, size_t n) {
-  assert(n != 0);
-  assert(offset + n <= rep->length);
-  assert(offset != 0 || n != rep->length);
-
-  if (rep->tag == SUBSTRING) {
-    CordRepSubstring* substring = rep->substring();
-    offset += substring->start;
-    rep = CordRep::Ref(substring->child);
-    CordRep::Unref(substring);
-  }
-  assert(rep->IsExternal() || rep->IsFlat());
-  CordRepSubstring* substring = new CordRepSubstring();
-  substring->length = n;
-  substring->tag = SUBSTRING;
-  substring->start = offset;
-  substring->child = rep;
-  return substring;
-}
-
-// TODO(b/192061034): consider making this a cord rep library function.
-inline CordRep* MakeSubstring(CordRep* rep, size_t offset, size_t n) {
-  if (n == rep->length) return rep;
-  if (n == 0) return CordRep::Unref(rep), nullptr;
-  return CreateSubstring(rep, offset, n);
-}
-
-// TODO(b/192061034): consider making this a cord rep library function.
-inline CordRep* MakeSubstring(CordRep* rep, size_t offset) {
-  if (offset == 0) return rep;
-  return CreateSubstring(rep, offset, rep->length - offset);
-}
-
-// Resizes `edge` to the provided `length`. Adopts a reference on `edge`.
-// This method directly returns `edge` if `length` equals `edge->length`.
-// If `is_mutable` is set to true, this function may return `edge` with
-// `edge->length` set to the new length depending on the type and size of
-// `edge`. Otherwise, this function returns a new CordRepSubstring value.
-// Requires `length > 0 && length <= edge->length`.
-CordRep* ResizeEdge(CordRep* edge, size_t length, bool is_mutable) {
-  assert(length > 0);
-  assert(length <= edge->length);
-  assert(IsDataEdge(edge));
-  if (length >= edge->length) return edge;
-
-  if (is_mutable && (edge->tag >= FLAT || edge->tag == SUBSTRING)) {
-    edge->length = length;
-    return edge;
-  }
-
-  return CreateSubstring(edge, 0, length);
-}
-
-template <EdgeType edge_type>
-inline absl::string_view Consume(absl::string_view s, size_t n) {
-  return edge_type == kBack ? s.substr(n) : s.substr(0, s.size() - n);
-}
-
-template <EdgeType edge_type>
-inline absl::string_view Consume(char* dst, absl::string_view s, size_t n) {
-  if (edge_type == kBack) {
-    memcpy(dst, s.data(), n);
-    return s.substr(n);
-  } else {
-    const size_t offset = s.size() - n;
-    memcpy(dst, s.data() + offset, n);
-    return s.substr(0, offset);
-  }
-}
-
-// Known issue / optimization weirdness: the store associated with the
-// decrement introduces traffic between cpus (even if the result of that
-// traffic does nothing), making this faster than a single call to
-// refcount.Decrement() checking the zero refcount condition.
-template <typename R, typename Fn>
-inline void FastUnref(R* r, Fn&& fn) {
-  if (r->refcount.IsOne()) {
-    fn(r);
-  } else if (!r->refcount.DecrementExpectHighRefcount()) {
-    fn(r);
-  }
-}
-
-
-void DeleteSubstring(CordRepSubstring* substring) {
-  CordRep* rep = substring->child;
-  if (!rep->refcount.Decrement()) {
-    if (rep->tag >= FLAT) {
-      CordRepFlat::Delete(rep->flat());
-    } else {
-      assert(rep->tag == EXTERNAL);
-      CordRepExternal::Delete(rep->external());
-    }
-  }
-  delete substring;
-}
-
-// Deletes a leaf node data edge. Requires `IsDataEdge(rep)`.
-void DeleteLeafEdge(CordRep* rep) {
-  assert(IsDataEdge(rep));
-  if (rep->tag >= FLAT) {
-    CordRepFlat::Delete(rep->flat());
-  } else if (rep->tag == EXTERNAL) {
-    CordRepExternal::Delete(rep->external());
-  } else {
-    DeleteSubstring(rep->substring());
-  }
-}
-
-// StackOperations contains the logic to build a left-most or right-most stack
-// (leg) down to the leaf level of a btree, and 'unwind' / 'Finalize' methods to
-// propagate node changes up the stack.
-template <EdgeType edge_type>
-struct StackOperations {
-  // Returns true if the node at 'depth' is not shared, i.e. has a refcount
-  // of one and all of its parent nodes have a refcount of one.
-  inline bool owned(int depth) const { return depth < share_depth; }
-
-  // Returns the node at 'depth'.
-  inline CordRepBtree* node(int depth) const { return stack[depth]; }
-
-  // Builds a `depth` levels deep stack starting at `tree` recording which nodes
-  // are private in the form of the 'share depth' where nodes are shared.
-  inline CordRepBtree* BuildStack(CordRepBtree* tree, int depth) {
-    assert(depth <= tree->height());
-    int current_depth = 0;
-    while (current_depth < depth && tree->refcount.IsOne()) {
-      stack[current_depth++] = tree;
-      tree = tree->Edge(edge_type)->btree();
-    }
-    share_depth = current_depth + (tree->refcount.IsOne() ? 1 : 0);
-    while (current_depth < depth) {
-      stack[current_depth++] = tree;
-      tree = tree->Edge(edge_type)->btree();
-    }
-    return tree;
-  }
-
-  // Builds a stack with the invariant that all nodes are private owned / not
-  // shared. This is used in iterative updates where a previous propagation
-  // guaranteed all nodes are owned / private.
-  inline void BuildOwnedStack(CordRepBtree* tree, int height) {
-    assert(height <= CordRepBtree::kMaxHeight);
-    int depth = 0;
-    while (depth < height) {
-      assert(tree->refcount.IsOne());
-      stack[depth++] = tree;
-      tree = tree->Edge(edge_type)->btree();
-    }
-    assert(tree->refcount.IsOne());
-    share_depth = depth + 1;
-  }
-
-  // Processes the final 'top level' result action for the tree.
-  // See the 'Action' enum for the various action implications.
-  static inline CordRepBtree* Finalize(CordRepBtree* tree, OpResult result) {
-    switch (result.action) {
-      case CordRepBtree::kPopped:
-        tree = edge_type == kBack ? CordRepBtree::New(tree, result.tree)
-                                  : CordRepBtree::New(result.tree, tree);
-        if (ABSL_PREDICT_FALSE(tree->height() > CordRepBtree::kMaxHeight)) {
-          tree = CordRepBtree::Rebuild(tree);
-          ABSL_RAW_CHECK(tree->height() <= CordRepBtree::kMaxHeight,
-                         "Max height exceeded");
-        }
-        return tree;
-      case CordRepBtree::kCopied:
-        CordRep::Unref(tree);
-        ABSL_FALLTHROUGH_INTENDED;
-      case CordRepBtree::kSelf:
-        return result.tree;
-    }
-    ABSL_INTERNAL_UNREACHABLE;
-    return result.tree;
-  }
-
-  // Propagate the action result in 'result' up into all nodes of the stack
-  // starting at depth 'depth'. 'length' contains the extra length of data that
-  // was added at the lowest level, and is updated into all nodes of the stack.
-  // See the 'Action' enum for the various action implications.
-  // If 'propagate' is true, then any copied node values are updated into the
-  // stack, which is used for iterative processing on the same stack.
-  template <bool propagate = false>
-  inline CordRepBtree* Unwind(CordRepBtree* tree, int depth, size_t length,
-                              OpResult result) {
-    // TODO(mvels): revisit the below code to check if 3 loops with 3
-    // (incremental) conditions is faster than 1 loop with a switch.
-    // Benchmarking and perf recordings indicate the loop with switch is
-    // fastest, likely because of indirect jumps on the tight case values and
-    // dense branches. But it's worth considering 3 loops, as the `action`
-    // transitions are mono directional. E.g.:
-    //   while (action == kPopped) {
-    //     ...
-    //   }
-    //   while (action == kCopied) {
-    //     ...
-    //   }
-    //   ...
-    // We also  found that an "if () do {}" loop here seems faster, possibly
-    // because it allows the branch predictor more granular heuristics on
-    // 'single leaf' (`depth` == 0) and 'single depth' (`depth` == 1) cases
-    // which appear to be the most common use cases.
-    if (depth != 0) {
-      do {
-        CordRepBtree* node = stack[--depth];
-        const bool owned = depth < share_depth;
-        switch (result.action) {
-          case CordRepBtree::kPopped:
-            assert(!propagate);
-            result = node->AddEdge<edge_type>(owned, result.tree, length);
-            break;
-          case CordRepBtree::kCopied:
-            result = node->SetEdge<edge_type>(owned, result.tree, length);
-            if (propagate) stack[depth] = result.tree;
-            break;
-          case CordRepBtree::kSelf:
-            node->length += length;
-            while (depth > 0) {
-              node = stack[--depth];
-              node->length += length;
-            }
-            return node;
-        }
-      } while (depth > 0);
-    }
-    return Finalize(tree, result);
-  }
-
-  // Invokes `Unwind` with `propagate=true` to update the stack node values.
-  inline CordRepBtree* Propagate(CordRepBtree* tree, int depth, size_t length,
-                                 OpResult result) {
-    return Unwind</*propagate=*/true>(tree, depth, length, result);
-  }
-
-  // `share_depth` contains the depth at which the nodes in the stack become
-  // shared. I.e., if the top most level is shared (i.e.: `!refcount.IsOne()`),
-  // then `share_depth` is 0. If the 2nd node is shared (and implicitly all
-  // nodes below that) then `share_depth` is 1, etc. A `share_depth` greater
-  // than the depth of the stack indicates that none of the nodes in the stack
-  // are shared.
-  int share_depth;
-
-  NodeStack stack;
-};
-
-}  // namespace
-
-void CordRepBtree::Dump(const CordRep* rep, absl::string_view label,
-                        bool include_contents, std::ostream& stream) {
-  stream << "===================================\n";
-  if (!label.empty()) {
-    stream << label << '\n';
-    stream << "-----------------------------------\n";
-  }
-  if (rep) {
-    DumpAll(rep, include_contents, stream);
-  } else {
-    stream << "NULL\n";
-  }
-}
-
-void CordRepBtree::Dump(const CordRep* rep, absl::string_view label,
-                        std::ostream& stream) {
-  Dump(rep, label, false, stream);
-}
-
-void CordRepBtree::Dump(const CordRep* rep, std::ostream& stream) {
-  Dump(rep, absl::string_view(), false, stream);
-}
-
-template <size_t size>
-static void DestroyTree(CordRepBtree* tree) {
-  for (CordRep* node : tree->Edges()) {
-    if (node->refcount.Decrement()) continue;
-    for (CordRep* edge : node->btree()->Edges()) {
-      if (edge->refcount.Decrement()) continue;
-      if (size == 1) {
-        DeleteLeafEdge(edge);
-      } else {
-        CordRepBtree::Destroy(edge->btree());
-      }
-    }
-    CordRepBtree::Delete(node->btree());
-  }
-  CordRepBtree::Delete(tree);
-}
-
-void CordRepBtree::Destroy(CordRepBtree* tree) {
-  switch (tree->height()) {
-    case 0:
-      for (CordRep* edge : tree->Edges()) {
-        if (!edge->refcount.Decrement()) {
-          DeleteLeafEdge(edge);
-        }
-      }
-      return CordRepBtree::Delete(tree);
-    case 1:
-      return DestroyTree<1>(tree);
-    default:
-      return DestroyTree<2>(tree);
-  }
-}
-
-bool CordRepBtree::IsValid(const CordRepBtree* tree, bool shallow) {
-#define NODE_CHECK_VALID(x)                                           \
-  if (!(x)) {                                                         \
-    ABSL_RAW_LOG(ERROR, "CordRepBtree::CheckValid() FAILED: %s", #x); \
-    return false;                                                     \
-  }
-#define NODE_CHECK_EQ(x, y)                                                    \
-  if ((x) != (y)) {                                                            \
-    ABSL_RAW_LOG(ERROR,                                                        \
-                 "CordRepBtree::CheckValid() FAILED: %s != %s (%s vs %s)", #x, \
-                 #y, absl::StrCat(x).c_str(), absl::StrCat(y).c_str());        \
-    return false;                                                              \
-  }
-
-  NODE_CHECK_VALID(tree != nullptr);
-  NODE_CHECK_VALID(tree->IsBtree());
-  NODE_CHECK_VALID(tree->height() <= kMaxHeight);
-  NODE_CHECK_VALID(tree->begin() < tree->capacity());
-  NODE_CHECK_VALID(tree->end() <= tree->capacity());
-  NODE_CHECK_VALID(tree->begin() <= tree->end());
-  size_t child_length = 0;
-  for (CordRep* edge : tree->Edges()) {
-    NODE_CHECK_VALID(edge != nullptr);
-    if (tree->height() > 0) {
-      NODE_CHECK_VALID(edge->IsBtree());
-      NODE_CHECK_VALID(edge->btree()->height() == tree->height() - 1);
-    } else {
-      NODE_CHECK_VALID(IsDataEdge(edge));
-    }
-    child_length += edge->length;
-  }
-  NODE_CHECK_EQ(child_length, tree->length);
-  if ((!shallow || exhaustive_validation()) && tree->height() > 0) {
-    for (CordRep* edge : tree->Edges()) {
-      if (!IsValid(edge->btree(), shallow)) return false;
-    }
-  }
-  return true;
-
-#undef NODE_CHECK_VALID
-#undef NODE_CHECK_EQ
-}
-
-#ifndef NDEBUG
-
-CordRepBtree* CordRepBtree::AssertValid(CordRepBtree* tree, bool shallow) {
-  if (!IsValid(tree, shallow)) {
-    Dump(tree, "CordRepBtree validation failed:", false, std::cout);
-    ABSL_RAW_LOG(FATAL, "CordRepBtree::CheckValid() FAILED");
-  }
-  return tree;
-}
-
-const CordRepBtree* CordRepBtree::AssertValid(const CordRepBtree* tree,
-                                              bool shallow) {
-  if (!IsValid(tree, shallow)) {
-    Dump(tree, "CordRepBtree validation failed:", false, std::cout);
-    ABSL_RAW_LOG(FATAL, "CordRepBtree::CheckValid() FAILED");
-  }
-  return tree;
-}
-
-#endif  // NDEBUG
-
-template <EdgeType edge_type>
-inline OpResult CordRepBtree::AddEdge(bool owned, CordRep* edge, size_t delta) {
-  if (size() >= kMaxCapacity) return {New(edge), kPopped};
-  OpResult result = ToOpResult(owned);
-  result.tree->Add<edge_type>(edge);
-  result.tree->length += delta;
-  return result;
-}
-
-template <EdgeType edge_type>
-OpResult CordRepBtree::SetEdge(bool owned, CordRep* edge, size_t delta) {
-  OpResult result;
-  const size_t idx = index(edge_type);
-  if (owned) {
-    result = {this, kSelf};
-    CordRep::Unref(edges_[idx]);
-  } else {
-    // Create a copy containing all unchanged edges. Unchanged edges are the
-    // open interval [begin, back) or [begin + 1, end) depending on `edge_type`.
-    // We conveniently cover both case using a constexpr `shift` being 0 or 1
-    // as `end :== back + 1`.
-    result = {CopyRaw(), kCopied};
-    constexpr int shift = edge_type == kFront ? 1 : 0;
-    for (CordRep* r : Edges(begin() + shift, back() + shift)) {
-      CordRep::Ref(r);
-    }
-  }
-  result.tree->edges_[idx] = edge;
-  result.tree->length += delta;
-  return result;
-}
-
-template <EdgeType edge_type>
-CordRepBtree* CordRepBtree::AddCordRep(CordRepBtree* tree, CordRep* rep) {
-  const int depth = tree->height();
-  const size_t length = rep->length;
-  StackOperations<edge_type> ops;
-  CordRepBtree* leaf = ops.BuildStack(tree, depth);
-  const OpResult result =
-      leaf->AddEdge<edge_type>(ops.owned(depth), rep, length);
-  return ops.Unwind(tree, depth, length, result);
-}
-
-template <>
-CordRepBtree* CordRepBtree::NewLeaf<kBack>(absl::string_view data,
-                                           size_t extra) {
-  CordRepBtree* leaf = CordRepBtree::New(0);
-  size_t length = 0;
-  size_t end = 0;
-  const size_t cap = leaf->capacity();
-  while (!data.empty() && end != cap) {
-    auto* flat = CordRepFlat::New(data.length() + extra);
-    flat->length = (std::min)(data.length(), flat->Capacity());
-    length += flat->length;
-    leaf->edges_[end++] = flat;
-    data = Consume<kBack>(flat->Data(), data, flat->length);
-  }
-  leaf->length = length;
-  leaf->set_end(end);
-  return leaf;
-}
-
-template <>
-CordRepBtree* CordRepBtree::NewLeaf<kFront>(absl::string_view data,
-                                            size_t extra) {
-  CordRepBtree* leaf = CordRepBtree::New(0);
-  size_t length = 0;
-  size_t begin = leaf->capacity();
-  leaf->set_end(leaf->capacity());
-  while (!data.empty() && begin != 0) {
-    auto* flat = CordRepFlat::New(data.length() + extra);
-    flat->length = (std::min)(data.length(), flat->Capacity());
-    length += flat->length;
-    leaf->edges_[--begin] = flat;
-    data = Consume<kFront>(flat->Data(), data, flat->length);
-  }
-  leaf->length = length;
-  leaf->set_begin(begin);
-  return leaf;
-}
-
-template <>
-absl::string_view CordRepBtree::AddData<kBack>(absl::string_view data,
-                                               size_t extra) {
-  assert(!data.empty());
-  assert(size() < capacity());
-  AlignBegin();
-  const size_t cap = capacity();
-  do {
-    CordRepFlat* flat = CordRepFlat::New(data.length() + extra);
-    const size_t n = (std::min)(data.length(), flat->Capacity());
-    flat->length = n;
-    edges_[fetch_add_end(1)] = flat;
-    data = Consume<kBack>(flat->Data(), data, n);
-  } while (!data.empty() && end() != cap);
-  return data;
-}
-
-template <>
-absl::string_view CordRepBtree::AddData<kFront>(absl::string_view data,
-                                                size_t extra) {
-  assert(!data.empty());
-  assert(size() < capacity());
-  AlignEnd();
-  do {
-    CordRepFlat* flat = CordRepFlat::New(data.length() + extra);
-    const size_t n = (std::min)(data.length(), flat->Capacity());
-    flat->length = n;
-    edges_[sub_fetch_begin(1)] = flat;
-    data = Consume<kFront>(flat->Data(), data, n);
-  } while (!data.empty() && begin() != 0);
-  return data;
-}
-
-template <EdgeType edge_type>
-CordRepBtree* CordRepBtree::AddData(CordRepBtree* tree, absl::string_view data,
-                                    size_t extra) {
-  if (ABSL_PREDICT_FALSE(data.empty())) return tree;
-
-  const size_t original_data_size = data.size();
-  int depth = tree->height();
-  StackOperations<edge_type> ops;
-  CordRepBtree* leaf = ops.BuildStack(tree, depth);
-
-  // If there is capacity in the last edge, append as much data
-  // as possible into this last edge.
-  if (leaf->size() < leaf->capacity()) {
-    OpResult result = leaf->ToOpResult(ops.owned(depth));
-    data = result.tree->AddData<edge_type>(data, extra);
-    if (data.empty()) {
-      result.tree->length += original_data_size;
-      return ops.Unwind(tree, depth, original_data_size, result);
-    }
-
-    // We added some data into this leaf, but not all. Propagate the added
-    // length to the top most node, and rebuild the stack with any newly copied
-    // or updated nodes. From this point on, the path (leg) from the top most
-    // node to the right-most node towards the leaf node is privately owned.
-    size_t delta = original_data_size - data.size();
-    assert(delta > 0);
-    result.tree->length += delta;
-    tree = ops.Propagate(tree, depth, delta, result);
-    ops.share_depth = depth + 1;
-  }
-
-  // We were unable to append all data into the existing right-most leaf node.
-  // This means all remaining data must be put into (a) new leaf node(s) which
-  // we append to the tree. To make this efficient, we iteratively build full
-  // leaf nodes from `data` until the created leaf contains all remaining data.
-  // We utilize the `Unwind` method to merge the created leaf into the first
-  // level towards root that has capacity. On each iteration with remaining
-  // data, we rebuild the stack in the knowledge that right-most nodes are
-  // privately owned after the first `Unwind` completes.
-  for (;;) {
-    OpResult result = {CordRepBtree::NewLeaf<edge_type>(data, extra), kPopped};
-    if (result.tree->length == data.size()) {
-      return ops.Unwind(tree, depth, result.tree->length, result);
-    }
-    data = Consume<edge_type>(data, result.tree->length);
-    tree = ops.Unwind(tree, depth, result.tree->length, result);
-    depth = tree->height();
-    ops.BuildOwnedStack(tree, depth);
-  }
-}
-
-template <EdgeType edge_type>
-CordRepBtree* CordRepBtree::Merge(CordRepBtree* dst, CordRepBtree* src) {
-  assert(dst->height() >= src->height());
-
-  // Capture source length as we may consume / destroy `src`.
-  const size_t length = src->length;
-
-  // We attempt to merge `src` at its corresponding height in `dst`.
-  const int depth = dst->height() - src->height();
-  StackOperations<edge_type> ops;
-  CordRepBtree* merge_node = ops.BuildStack(dst, depth);
-
-  // If there is enough space in `merge_node` for all edges from `src`, add all
-  // edges to this node, making a fresh copy as needed if not privately owned.
-  // If `merge_node` does not have capacity for `src`, we rely on `Unwind` and
-  // `Finalize` to merge `src` into the first level towards `root` where there
-  // is capacity for another edge, or create a new top level node.
-  OpResult result;
-  if (merge_node->size() + src->size() <= kMaxCapacity) {
-    result = merge_node->ToOpResult(ops.owned(depth));
-    result.tree->Add<edge_type>(src->Edges());
-    result.tree->length += src->length;
-    if (src->refcount.IsOne()) {
-      Delete(src);
-    } else {
-      for (CordRep* edge : src->Edges()) CordRep::Ref(edge);
-      CordRepBtree::Unref(src);
-    }
-  } else {
-    result = {src, kPopped};
-  }
-
-  // Unless we merged at the top level (i.e.: src and dst are equal height),
-  // unwind the result towards the top level, and finalize the result.
-  if (depth) {
-    return ops.Unwind(dst, depth, length, result);
-  }
-  return ops.Finalize(dst, result);
-}
-
-CopyResult CordRepBtree::CopySuffix(size_t offset) {
-  assert(offset < this->length);
-
-  // As long as `offset` starts inside the last edge, we can 'drop' the current
-  // depth. For the most extreme example: if offset references the last data
-  // edge in the tree, there is only a single edge / path from the top of the
-  // tree to that last edge, so we can drop all the nodes except that edge.
-  // The fast path check for this is `back->length >= length - offset`.
-  int height = this->height();
-  CordRepBtree* node = this;
-  size_t len = node->length - offset;
-  CordRep* back = node->Edge(kBack);
-  while (back->length >= len) {
-    offset = back->length - len;
-    if (--height < 0) {
-      return {MakeSubstring(CordRep::Ref(back), offset), height};
-    }
-    node = back->btree();
-    back = node->Edge(kBack);
-  }
-  if (offset == 0) return {CordRep::Ref(node), height};
-
-  // Offset does not point into the last edge, so we span at least two edges.
-  // Find the index of offset with `IndexBeyond` which provides us the edge
-  // 'beyond' the offset if offset is not a clean starting point of an edge.
-  Position pos = node->IndexBeyond(offset);
-  CordRepBtree* sub = node->CopyToEndFrom(pos.index, len);
-  const CopyResult result = {sub, height};
-
-  // `pos.n` contains a non zero value if the offset is not an exact starting
-  // point of an edge. In this case, `pos.n` contains the 'trailing' amount of
-  // bytes of the edge preceding that in `pos.index`. We need to iteratively
-  // adjust the preceding edge with the 'broken' offset until we have a perfect
-  // start of the edge.
-  while (pos.n != 0) {
-    assert(pos.index >= 1);
-    const size_t begin = pos.index - 1;
-    sub->set_begin(begin);
-    CordRep* const edge = node->Edge(begin);
-
-    len = pos.n;
-    offset = edge->length - len;
-
-    if (--height < 0) {
-      sub->edges_[begin] = MakeSubstring(CordRep::Ref(edge), offset, len);
-      return result;
-    }
-
-    node = edge->btree();
-    pos = node->IndexBeyond(offset);
-
-    CordRepBtree* nsub = node->CopyToEndFrom(pos.index, len);
-    sub->edges_[begin] = nsub;
-    sub = nsub;
-  }
-  sub->set_begin(pos.index);
-  return result;
-}
-
-CopyResult CordRepBtree::CopyPrefix(size_t n, bool allow_folding) {
-  assert(n > 0);
-  assert(n <= this->length);
-
-  // As long as `n` does not exceed the length of the first edge, we can 'drop'
-  // the current depth. For the most extreme example: if we'd copy a 1 byte
-  // prefix from a tree, there is only a single edge / path from the top of the
-  // tree to the single data edge containing this byte, so we can drop all the
-  // nodes except the data node.
-  int height = this->height();
-  CordRepBtree* node = this;
-  CordRep* front = node->Edge(kFront);
-  if (allow_folding) {
-    while (front->length >= n) {
-      if (--height < 0) return {MakeSubstring(CordRep::Ref(front), 0, n), -1};
-      node = front->btree();
-      front = node->Edge(kFront);
-    }
-  }
-  if (node->length == n) return {CordRep::Ref(node), height};
-
-  // `n` spans at least two nodes, find the end point of the span.
-  Position pos = node->IndexOf(n);
-
-  // Create a partial copy of the node up to `pos.index`, with a defined length
-  // of `n`. Any 'partial last edge' is added further below as needed.
-  CordRepBtree* sub = node->CopyBeginTo(pos.index, n);
-  const CopyResult result = {sub, height};
-
-  // `pos.n` contains the 'offset inside the edge for IndexOf(n)'. As long as
-  // this is not zero, we don't have a 'clean cut', so we need to make a
-  // (partial) copy of that last edge, and repeat this until pos.n is zero.
-  while (pos.n != 0) {
-    size_t end = pos.index;
-    n = pos.n;
-
-    CordRep* edge = node->Edge(pos.index);
-    if (--height < 0) {
-      sub->edges_[end++] = MakeSubstring(CordRep::Ref(edge), 0, n);
-      sub->set_end(end);
-      AssertValid(result.edge->btree());
-      return result;
-    }
-
-    node = edge->btree();
-    pos = node->IndexOf(n);
-    CordRepBtree* nsub = node->CopyBeginTo(pos.index, n);
-    sub->edges_[end++] = nsub;
-    sub->set_end(end);
-    sub = nsub;
-  }
-  sub->set_end(pos.index);
-  AssertValid(result.edge->btree());
-  return result;
-}
-
-CordRep* CordRepBtree::ExtractFront(CordRepBtree* tree) {
-  CordRep* front = tree->Edge(tree->begin());
-  if (tree->refcount.IsOne()) {
-    Unref(tree->Edges(tree->begin() + 1, tree->end()));
-    CordRepBtree::Delete(tree);
-  } else {
-    CordRep::Ref(front);
-    CordRep::Unref(tree);
-  }
-  return front;
-}
-
-CordRepBtree* CordRepBtree::ConsumeBeginTo(CordRepBtree* tree, size_t end,
-                                           size_t new_length) {
-  assert(end <= tree->end());
-  if (tree->refcount.IsOne()) {
-    Unref(tree->Edges(end, tree->end()));
-    tree->set_end(end);
-    tree->length = new_length;
-  } else {
-    CordRepBtree* old = tree;
-    tree = tree->CopyBeginTo(end, new_length);
-    CordRep::Unref(old);
-  }
-  return tree;
-}
-
-CordRep* CordRepBtree::RemoveSuffix(CordRepBtree* tree, size_t n) {
-  // Check input and deal with trivial cases 'Remove all/none'
-  assert(tree != nullptr);
-  assert(n <= tree->length);
-  const size_t len = tree->length;
-  if (ABSL_PREDICT_FALSE(n == 0)) {
-    return tree;
-  }
-  if (ABSL_PREDICT_FALSE(n >= len)) {
-    CordRepBtree::Unref(tree);
-    return nullptr;
-  }
-
-  size_t length = len - n;
-  int height = tree->height();
-  bool is_mutable = tree->refcount.IsOne();
-
-  // Extract all top nodes which are reduced to size = 1
-  Position pos = tree->IndexOfLength(length);
-  while (pos.index == tree->begin()) {
-    CordRep* edge = ExtractFront(tree);
-    is_mutable &= edge->refcount.IsOne();
-    if (height-- == 0) return ResizeEdge(edge, length, is_mutable);
-    tree = edge->btree();
-    pos = tree->IndexOfLength(length);
-  }
-
-  // Repeat the following sequence traversing down the tree:
-  // - Crop the top node to the 'last remaining edge' adjusting length.
-  // - Set the length for down edges to the partial length in that last edge.
-  // - Repeat this until the last edge is 'included in full'
-  // - If we hit the data edge level, resize and return the last data edge
-  CordRepBtree* top = tree = ConsumeBeginTo(tree, pos.index + 1, length);
-  CordRep* edge = tree->Edge(pos.index);
-  length = pos.n;
-  while (length != edge->length) {
-    // ConsumeBeginTo guarantees `tree` is a clean, privately owned copy.
-    assert(tree->refcount.IsOne());
-    const bool edge_is_mutable = edge->refcount.IsOne();
-
-    if (height-- == 0) {
-      tree->edges_[pos.index] = ResizeEdge(edge, length, edge_is_mutable);
-      return AssertValid(top);
-    }
-
-    if (!edge_is_mutable) {
-      // We can't 'in place' remove any suffixes down this edge.
-      // Replace this edge with a prefix copy instead.
-      tree->edges_[pos.index] = edge->btree()->CopyPrefix(length, false).edge;
-      CordRep::Unref(edge);
-      return AssertValid(top);
-    }
-
-    // Move down one level, rinse repeat.
-    tree = edge->btree();
-    pos = tree->IndexOfLength(length);
-    tree = ConsumeBeginTo(edge->btree(), pos.index + 1, length);
-    edge = tree->Edge(pos.index);
-    length = pos.n;
-  }
-
-  return AssertValid(top);
-}
-
-CordRep* CordRepBtree::SubTree(size_t offset, size_t n) {
-  assert(n <= this->length);
-  assert(offset <= this->length - n);
-  if (ABSL_PREDICT_FALSE(n == 0)) return nullptr;
-
-  CordRepBtree* node = this;
-  int height = node->height();
-  Position front = node->IndexOf(offset);
-  CordRep* left = node->edges_[front.index];
-  while (front.n + n <= left->length) {
-    if (--height < 0) return MakeSubstring(CordRep::Ref(left), front.n, n);
-    node = left->btree();
-    front = node->IndexOf(front.n);
-    left = node->edges_[front.index];
-  }
-
-  const Position back = node->IndexBefore(front, n);
-  CordRep* const right = node->edges_[back.index];
-  assert(back.index > front.index);
-
-  // Get partial suffix and prefix entries.
-  CopyResult prefix;
-  CopyResult suffix;
-  if (height > 0) {
-    // Copy prefix and suffix of the boundary nodes.
-    prefix = left->btree()->CopySuffix(front.n);
-    suffix = right->btree()->CopyPrefix(back.n);
-
-    // If there is an edge between the prefix and suffix edges, then the tree
-    // must remain at its previous (full) height. If we have no edges between
-    // prefix and suffix edges, then the tree must be as high as either the
-    // suffix or prefix edges (which are collapsed to their minimum heights).
-    if (front.index + 1 == back.index) {
-      height = (std::max)(prefix.height, suffix.height) + 1;
-    }
-
-    // Raise prefix and suffixes to the new tree height.
-    for (int h = prefix.height + 1; h < height; ++h) {
-      prefix.edge = CordRepBtree::New(prefix.edge);
-    }
-    for (int h = suffix.height + 1; h < height; ++h) {
-      suffix.edge = CordRepBtree::New(suffix.edge);
-    }
-  } else {
-    // Leaf node, simply take substrings for prefix and suffix.
-    prefix = CopyResult{MakeSubstring(CordRep::Ref(left), front.n), -1};
-    suffix = CopyResult{MakeSubstring(CordRep::Ref(right), 0, back.n), -1};
-  }
-
-  // Compose resulting tree.
-  CordRepBtree* sub = CordRepBtree::New(height);
-  size_t end = 0;
-  sub->edges_[end++] = prefix.edge;
-  for (CordRep* r : node->Edges(front.index + 1, back.index)) {
-    sub->edges_[end++] = CordRep::Ref(r);
-  }
-  sub->edges_[end++] = suffix.edge;
-  sub->set_end(end);
-  sub->length = n;
-  return AssertValid(sub);
-}
-
-CordRepBtree* CordRepBtree::MergeTrees(CordRepBtree* left,
-                                       CordRepBtree* right) {
-  return left->height() >= right->height() ? Merge<kBack>(left, right)
-                                           : Merge<kFront>(right, left);
-}
-
-bool CordRepBtree::IsFlat(absl::string_view* fragment) const {
-  if (height() == 0 && size() == 1) {
-    if (fragment) *fragment = Data(begin());
-    return true;
-  }
-  return false;
-}
-
-bool CordRepBtree::IsFlat(size_t offset, const size_t n,
-                          absl::string_view* fragment) const {
-  assert(n <= this->length);
-  assert(offset <= this->length - n);
-  if (ABSL_PREDICT_FALSE(n == 0)) return false;
-  int height = this->height();
-  const CordRepBtree* node = this;
-  for (;;) {
-    const Position front = node->IndexOf(offset);
-    const CordRep* edge = node->Edge(front.index);
-    if (edge->length < front.n + n) return false;
-    if (--height < 0) {
-      if (fragment) *fragment = EdgeData(edge).substr(front.n, n);
-      return true;
-    }
-    offset = front.n;
-    node = node->Edge(front.index)->btree();
-  }
-}
-
-char CordRepBtree::GetCharacter(size_t offset) const {
-  assert(offset < length);
-  const CordRepBtree* node = this;
-  int height = node->height();
-  for (;;) {
-    Position front = node->IndexOf(offset);
-    if (--height < 0) return node->Data(front.index)[front.n];
-    offset = front.n;
-    node = node->Edge(front.index)->btree();
-  }
-}
-
-Span<char> CordRepBtree::GetAppendBufferSlow(size_t size) {
-  // The inlined version in `GetAppendBuffer()` deals with all heights <= 3.
-  assert(height() >= 4);
-  assert(refcount.IsOne());
-
-  // Build a stack of nodes we may potentially need to update if we find a
-  // non-shared FLAT with capacity at the leaf level.
-  const int depth = height();
-  CordRepBtree* node = this;
-  CordRepBtree* stack[kMaxDepth];
-  for (int i = 0; i < depth; ++i) {
-    node = node->Edge(kBack)->btree();
-    if (!node->refcount.IsOne()) return {};
-    stack[i] = node;
-  }
-
-  // Must be a privately owned, mutable flat.
-  CordRep* const edge = node->Edge(kBack);
-  if (!edge->refcount.IsOne() || edge->tag < FLAT) return {};
-
-  // Must have capacity.
-  const size_t avail = edge->flat()->Capacity() - edge->length;
-  if (avail == 0) return {};
-
-  // Build span on remaining capacity.
-  size_t delta = (std::min)(size, avail);
-  Span<char> span = {edge->flat()->Data() + edge->length, delta};
-  edge->length += delta;
-  this->length += delta;
-  for (int i = 0; i < depth; ++i) {
-    stack[i]->length += delta;
-  }
-  return span;
-}
-
-CordRepBtree* CordRepBtree::CreateSlow(CordRep* rep) {
-  if (rep->IsBtree()) return rep->btree();
-
-  CordRepBtree* node = nullptr;
-  auto consume = [&node](CordRep* r, size_t offset, size_t length) {
-    r = MakeSubstring(r, offset, length);
-    if (node == nullptr) {
-      node = New(r);
-    } else {
-      node = CordRepBtree::AddCordRep<kBack>(node, r);
-    }
-  };
-  Consume(rep, consume);
-  return node;
-}
-
-CordRepBtree* CordRepBtree::AppendSlow(CordRepBtree* tree, CordRep* rep) {
-  if (ABSL_PREDICT_TRUE(rep->IsBtree())) {
-    return MergeTrees(tree, rep->btree());
-  }
-  auto consume = [&tree](CordRep* r, size_t offset, size_t length) {
-    r = MakeSubstring(r, offset, length);
-    tree = CordRepBtree::AddCordRep<kBack>(tree, r);
-  };
-  Consume(rep, consume);
-  return tree;
-}
-
-CordRepBtree* CordRepBtree::PrependSlow(CordRepBtree* tree, CordRep* rep) {
-  if (ABSL_PREDICT_TRUE(rep->IsBtree())) {
-    return MergeTrees(rep->btree(), tree);
-  }
-  auto consume = [&tree](CordRep* r, size_t offset, size_t length) {
-    r = MakeSubstring(r, offset, length);
-    tree = CordRepBtree::AddCordRep<kFront>(tree, r);
-  };
-  ReverseConsume(rep, consume);
-  return tree;
-}
-
-CordRepBtree* CordRepBtree::Append(CordRepBtree* tree, absl::string_view data,
-                                   size_t extra) {
-  return CordRepBtree::AddData<kBack>(tree, data, extra);
-}
-
-CordRepBtree* CordRepBtree::Prepend(CordRepBtree* tree, absl::string_view data,
-                                    size_t extra) {
-  return CordRepBtree::AddData<kFront>(tree, data, extra);
-}
-
-template CordRepBtree* CordRepBtree::AddCordRep<kFront>(CordRepBtree* tree,
-                                                        CordRep* rep);
-template CordRepBtree* CordRepBtree::AddCordRep<kBack>(CordRepBtree* tree,
-                                                       CordRep* rep);
-template CordRepBtree* CordRepBtree::AddData<kFront>(CordRepBtree* tree,
-                                                     absl::string_view data,
-                                                     size_t extra);
-template CordRepBtree* CordRepBtree::AddData<kBack>(CordRepBtree* tree,
-                                                    absl::string_view data,
-                                                    size_t extra);
-
-void CordRepBtree::Rebuild(CordRepBtree** stack, CordRepBtree* tree,
-                           bool consume) {
-  bool owned = consume && tree->refcount.IsOne();
-  if (tree->height() == 0) {
-    for (CordRep* edge : tree->Edges()) {
-      if (!owned) edge = CordRep::Ref(edge);
-      size_t height = 0;
-      size_t length = edge->length;
-      CordRepBtree* node = stack[0];
-      OpResult result = node->AddEdge<kBack>(true, edge, length);
-      while (result.action == CordRepBtree::kPopped) {
-        stack[height] = result.tree;
-        if (stack[++height] == nullptr) {
-          result.action = CordRepBtree::kSelf;
-          stack[height] = CordRepBtree::New(node, result.tree);
-        } else {
-          node = stack[height];
-          result = node->AddEdge<kBack>(true, result.tree, length);
-        }
-      }
-      while (stack[++height] != nullptr) {
-        stack[height]->length += length;
-      }
-    }
-  } else {
-    for (CordRep* rep : tree->Edges()) {
-      Rebuild(stack, rep->btree(), owned);
-    }
-  }
-  if (consume) {
-    if (owned) {
-      CordRepBtree::Delete(tree);
-    } else {
-      CordRepBtree::Unref(tree);
-    }
-  }
-}
-
-CordRepBtree* CordRepBtree::Rebuild(CordRepBtree* tree) {
-  // Set up initial stack with empty leaf node.
-  CordRepBtree* node = CordRepBtree::New();
-  CordRepBtree* stack[CordRepBtree::kMaxDepth + 1] = {node};
-
-  // Recursively build the tree, consuming the input tree.
-  Rebuild(stack, tree, /* consume reference */ true);
-
-  // Return top most node
-  for (CordRepBtree* parent : stack) {
-    if (parent == nullptr) return node;
-    node = parent;
-  }
-
-  // Unreachable
-  assert(false);
-  return nullptr;
-}
-
-CordRepBtree::ExtractResult CordRepBtree::ExtractAppendBuffer(
-    CordRepBtree* tree, size_t extra_capacity) {
-  int depth = 0;
-  NodeStack stack;
-
-  // Set up default 'no success' result which is {tree, nullptr}.
-  ExtractResult result;
-  result.tree = tree;
-  result.extracted = nullptr;
-
-  // Dive down the right side of the tree, making sure no edges are shared.
-  while (tree->height() > 0) {
-    if (!tree->refcount.IsOne()) return result;
-    stack[depth++] = tree;
-    tree = tree->Edge(kBack)->btree();
-  }
-  if (!tree->refcount.IsOne()) return result;
-
-  // Validate we ended on a non shared flat.
-  CordRep* rep = tree->Edge(kBack);
-  if (!(rep->IsFlat() && rep->refcount.IsOne())) return result;
-
-  // Verify it has at least the requested extra capacity.
-  CordRepFlat* flat = rep->flat();
-  const size_t length = flat->length;
-  const size_t avail = flat->Capacity() - flat->length;
-  if (extra_capacity > avail) return result;
-
-  // Set the extracted flat in the result.
-  result.extracted = flat;
-
-  // Cascading delete all nodes that become empty.
-  while (tree->size() == 1) {
-    CordRepBtree::Delete(tree);
-    if (--depth < 0) {
-      // We consumed the entire tree: return nullptr for new tree.
-      result.tree = nullptr;
-      return result;
-    }
-    rep = tree;
-    tree = stack[depth];
-  }
-
-  // Remove the edge or cascaded up parent node.
-  tree->set_end(tree->end() - 1);
-  tree->length -= length;
-
-  // Adjust lengths up the tree.
-  while (depth > 0) {
-    tree = stack[--depth];
-    tree->length -= length;
-  }
-
-  // Remove unnecessary top nodes with size = 1. This may iterate all the way
-  // down to the leaf node in which case we simply return the remaining last
-  // edge in that node and the extracted flat.
-  while (tree->size() == 1) {
-    int height = tree->height();
-    rep = tree->Edge(kBack);
-    Delete(tree);
-    if (height == 0) {
-      // We consumed the leaf: return the sole data edge as the new tree.
-      result.tree = rep;
-      return result;
-    }
-    tree = rep->btree();
-  }
-
-  // Done: return the (new) top level node and extracted flat.
-  result.tree = tree;
-  return result;
-}
-
-}  // namespace cord_internal
-ABSL_NAMESPACE_END
-}  // namespace absl