grpc 1.35.0 → 1.47.0

data/third_party/boringssl-with-bazel/src/include/openssl/bytestring.h

@@ -51,6 +51,7 @@ struct cbs_st {
   // Defining any constructors requires we explicitly default the others.
   cbs_st() = default;
   cbs_st(const cbs_st &) = default;
+  cbs_st &operator=(const cbs_st &) = default;
 #endif
 };
 
@@ -153,6 +154,11 @@ OPENSSL_EXPORT int CBS_get_u16_length_prefixed(CBS *cbs, CBS *out);
 // returns one on success and zero on error.
 OPENSSL_EXPORT int CBS_get_u24_length_prefixed(CBS *cbs, CBS *out);
 
+// CBS_get_until_first finds the first instance of |c| in |cbs|. If found, it
+// sets |*out| to the text before the match, advances |cbs| over it, and returns
+// one. Otherwise, it returns zero and leaves |cbs| unmodified.
+OPENSSL_EXPORT int CBS_get_until_first(CBS *cbs, CBS *out, uint8_t c);
+
 
 // Parsing ASN.1
 //
@@ -252,12 +258,16 @@ OPENSSL_EXPORT int CBS_get_any_asn1_element(CBS *cbs, CBS *out,
                                             size_t *out_header_len);
 
 // CBS_get_any_ber_asn1_element acts the same as |CBS_get_any_asn1_element| but
-// also allows indefinite-length elements to be returned. In that case,
-// |*out_header_len| and |CBS_len(out)| will both be two as only the header is
-// returned, otherwise it behaves the same as the previous function.
+// also allows indefinite-length elements to be returned and does not enforce
+// that lengths are minimal. For indefinite-lengths, |*out_header_len| and
+// |CBS_len(out)| will be equal as only the header is returned (although this is
+// also true for empty elements so the length must be checked too). If
+// |out_ber_found| is not NULL then it is set to one if any case of invalid DER
+// but valid BER is found, and to zero otherwise.
 OPENSSL_EXPORT int CBS_get_any_ber_asn1_element(CBS *cbs, CBS *out,
                                                 unsigned *out_tag,
-                                                size_t *out_header_len);
+                                                size_t *out_header_len,
+                                                int *out_ber_found);
 
 // CBS_get_asn1_uint64 gets an ASN.1 INTEGER from |cbs| using |CBS_get_asn1|
 // and sets |*out| to its value. It returns one on success and zero on error,
@@ -310,14 +320,25 @@ OPENSSL_EXPORT int CBS_get_optional_asn1_bool(CBS *cbs, int *out, unsigned tag,
                                               int default_value);
 
 // CBS_is_valid_asn1_bitstring returns one if |cbs| is a valid ASN.1 BIT STRING
-// and zero otherwise.
+// body and zero otherwise.
 OPENSSL_EXPORT int CBS_is_valid_asn1_bitstring(const CBS *cbs);
 
 // CBS_asn1_bitstring_has_bit returns one if |cbs| is a valid ASN.1 BIT STRING
-// and the specified bit is present and set. Otherwise, it returns zero. |bit|
-// is indexed starting from zero.
+// body and the specified bit is present and set. Otherwise, it returns zero.
+// |bit| is indexed starting from zero.
 OPENSSL_EXPORT int CBS_asn1_bitstring_has_bit(const CBS *cbs, unsigned bit);
 
+// CBS_is_valid_asn1_integer returns one if |cbs| is a valid ASN.1 INTEGER,
+// body and zero otherwise. On success, if |out_is_negative| is non-NULL,
+// |*out_is_negative| will be set to one if |cbs| is negative and zero
+// otherwise.
+OPENSSL_EXPORT int CBS_is_valid_asn1_integer(const CBS *cbs,
+                                             int *out_is_negative);
+
+// CBS_is_unsigned_asn1_integer returns one if |cbs| is a valid non-negative
+// ASN.1 INTEGER body and zero otherwise.
+OPENSSL_EXPORT int CBS_is_unsigned_asn1_integer(const CBS *cbs);
+
 // CBS_asn1_oid_to_text interprets |cbs| as DER-encoded ASN.1 OBJECT IDENTIFIER
 // contents (not including the element framing) and returns the ASCII
 // representation (e.g., "1.2.840.113554.4.1.72585") in a newly-allocated
@@ -447,6 +468,10 @@ OPENSSL_EXPORT int CBB_add_asn1(CBB *cbb, CBB *out_contents, unsigned tag);
 // success and zero otherwise.
 OPENSSL_EXPORT int CBB_add_bytes(CBB *cbb, const uint8_t *data, size_t len);
 
+// CBB_add_zeros append |len| bytes with value zero to |cbb|. It returns one on
+// success and zero otherwise.
+OPENSSL_EXPORT int CBB_add_zeros(CBB *cbb, size_t len);
+
 // CBB_add_space appends |len| bytes to |cbb| and sets |*out_data| to point to
 // the beginning of that space. The caller must then write |len| bytes of
 // actual contents to |*out_data|. It returns one on success and zero

data/third_party/boringssl-with-bazel/src/include/openssl/chacha.h

@@ -23,7 +23,7 @@ extern "C" {
 
 // ChaCha20.
 //
-// ChaCha20 is a stream cipher. See https://tools.ietf.org/html/rfc7539.
+// ChaCha20 is a stream cipher. See https://tools.ietf.org/html/rfc8439.
 
 
 // CRYPTO_chacha_20 encrypts |in_len| bytes from |in| with the given key and

data/third_party/boringssl-with-bazel/src/include/openssl/cipher.h

@@ -106,7 +106,10 @@ OPENSSL_EXPORT const EVP_CIPHER *EVP_rc2_cbc(void);
 const EVP_CIPHER *EVP_rc2_40_cbc(void);
 
 // EVP_get_cipherbynid returns the cipher corresponding to the given NID, or
-// NULL if no such cipher is known.
+// NULL if no such cipher is known. Note using this function links almost every
+// cipher implemented by BoringSSL into the binary, whether the caller uses them
+// or not. Size-conscious callers, such as client software, should not use this
+// function.
 OPENSSL_EXPORT const EVP_CIPHER *EVP_get_cipherbynid(int nid);
 
 
@@ -198,7 +201,7 @@ OPENSSL_EXPORT int EVP_DecryptUpdate(EVP_CIPHER_CTX *ctx, uint8_t *out,
 //
 // WARNING: it is unsafe to call this function with unauthenticated
 // ciphertext if padding is enabled.
-OPENSSL_EXPORT int EVP_DecryptFinal_ex(EVP_CIPHER_CTX *ctx, unsigned char *out,
+OPENSSL_EXPORT int EVP_DecryptFinal_ex(EVP_CIPHER_CTX *ctx, uint8_t *out,
                                        int *out_len);
 
 // EVP_Cipher performs a one-shot encryption/decryption operation. No partial
@@ -405,11 +408,26 @@ OPENSSL_EXPORT int EVP_DecryptInit(EVP_CIPHER_CTX *ctx,
                                    const EVP_CIPHER *cipher, const uint8_t *key,
                                    const uint8_t *iv);
 
+// EVP_CipherFinal calls |EVP_CipherFinal_ex|.
+OPENSSL_EXPORT int EVP_CipherFinal(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                   int *out_len);
+
+// EVP_EncryptFinal calls |EVP_EncryptFinal_ex|.
+OPENSSL_EXPORT int EVP_EncryptFinal(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                    int *out_len);
+
+// EVP_DecryptFinal calls |EVP_DecryptFinal_ex|.
+OPENSSL_EXPORT int EVP_DecryptFinal(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                    int *out_len);
+
 // EVP_add_cipher_alias does nothing and returns one.
 OPENSSL_EXPORT int EVP_add_cipher_alias(const char *a, const char *b);
 
 // EVP_get_cipherbyname returns an |EVP_CIPHER| given a human readable name in
-// |name|, or NULL if the name is unknown.
+// |name|, or NULL if the name is unknown. Note using this function links almost
+// every cipher implemented by BoringSSL into the binary, not just the ones the
+// caller requests. Size-conscious callers, such as client software, should not
+// use this function.
 OPENSSL_EXPORT const EVP_CIPHER *EVP_get_cipherbyname(const char *name);
 
 // These AEADs are deprecated AES-GCM implementations that set
@@ -431,9 +449,24 @@ OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede3_ecb(void);
 // EVP_aes_128_cfb128 is only available in decrepit.
 OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_cfb128(void);
 
+// EVP_aes_128_cfb is an alias for |EVP_aes_128_cfb128| and is only available in
+// decrepit.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_cfb(void);
+
+// EVP_aes_192_cfb128 is only available in decrepit.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_cfb128(void);
+
+// EVP_aes_192_cfb is an alias for |EVP_aes_192_cfb128| and is only available in
+// decrepit.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_cfb(void);
+
 // EVP_aes_256_cfb128 is only available in decrepit.
 OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_cfb128(void);
 
+// EVP_aes_256_cfb is an alias for |EVP_aes_256_cfb128| and is only available in
+// decrepit.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_cfb(void);
+
 // EVP_bf_ecb is Blowfish in ECB mode and is only available in decrepit.
 OPENSSL_EXPORT const EVP_CIPHER *EVP_bf_ecb(void);
 
@@ -541,10 +574,6 @@ struct evp_cipher_ctx_st {
   // final_used is non-zero if the |final| buffer contains plaintext.
   int final_used;
 
-  // block_mask contains |cipher->block_size| minus one. (The block size
-  // assumed to be a power of two.)
-  int block_mask;
-
   uint8_t final[EVP_MAX_BLOCK_LENGTH];  // possible final block
 } /* EVP_CIPHER_CTX */;
 

data/third_party/boringssl-with-bazel/src/include/openssl/conf.h

@@ -100,22 +100,25 @@ OPENSSL_EXPORT void NCONF_free(CONF *conf);
 // |conf|. It returns one on success and zero on error. In the event of an
 // error, if |out_error_line| is not NULL, |*out_error_line| is set to the
 // number of the line that contained the error.
-int NCONF_load(CONF *conf, const char *filename, long *out_error_line);
+OPENSSL_EXPORT int NCONF_load(CONF *conf, const char *filename,
+                              long *out_error_line);
 
 // NCONF_load_bio acts like |NCONF_load| but reads from |bio| rather than from
 // a named file.
-int NCONF_load_bio(CONF *conf, BIO *bio, long *out_error_line);
+OPENSSL_EXPORT int NCONF_load_bio(CONF *conf, BIO *bio, long *out_error_line);
 
 // NCONF_get_section returns a stack of values for a given section in |conf|.
 // If |section| is NULL, the default section is returned. It returns NULL on
 // error.
-STACK_OF(CONF_VALUE) *NCONF_get_section(const CONF *conf, const char *section);
+OPENSSL_EXPORT STACK_OF(CONF_VALUE) *NCONF_get_section(const CONF *conf,
+                                                       const char *section);
 
 // NCONF_get_string returns the value of the key |name|, in section |section|.
 // The |section| argument may be NULL to indicate the default section. It
 // returns the value or NULL on error.
-const char *NCONF_get_string(const CONF *conf, const char *section,
-                             const char *name);
+OPENSSL_EXPORT const char *NCONF_get_string(const CONF *conf,
+                                            const char *section,
+                                            const char *name);
 
 
 // Utility functions

data/third_party/boringssl-with-bazel/src/include/openssl/cpu.h

@@ -111,26 +111,18 @@ OPENSSL_INLINE const uint32_t *OPENSSL_ia32cap_get(void) {
 #endif
 
 #if !defined(OPENSSL_STATIC_ARMCAP)
-
 // CRYPTO_is_NEON_capable_at_runtime returns true if the current CPU has a NEON
 // unit. Note that |OPENSSL_armcap_P| also exists and contains the same
 // information in a form that's easier for assembly to use.
-OPENSSL_EXPORT char CRYPTO_is_NEON_capable_at_runtime(void);
+OPENSSL_EXPORT int CRYPTO_is_NEON_capable_at_runtime(void);
 
-// CRYPTO_is_NEON_capable returns true if the current CPU has a NEON unit. If
-// this is known statically then it returns one immediately.
-OPENSSL_INLINE int CRYPTO_is_NEON_capable(void) {
-  // Only statically skip the runtime lookup on aarch64. On arm, one CPU is
-  // known to have a broken NEON unit which is known to fail with on some
-  // hand-written NEON assembly. For now, continue to apply the workaround even
-  // when the compiler is instructed to freely emit NEON code. See
-  // https://crbug.com/341598 and https://crbug.com/606629.
-#if (defined(__ARM_NEON__) || defined(__ARM_NEON)) && !defined(OPENSSL_ARM)
-  return 1;
-#else
-  return CRYPTO_is_NEON_capable_at_runtime();
-#endif
-}
+// CRYPTO_is_ARMv8_AES_capable_at_runtime returns true if the current CPU
+// supports the ARMv8 AES instruction.
+int CRYPTO_is_ARMv8_AES_capable_at_runtime(void);
+
+// CRYPTO_is_ARMv8_PMULL_capable_at_runtime returns true if the current CPU
+// supports the ARMv8 PMULL instruction.
+int CRYPTO_is_ARMv8_PMULL_capable_at_runtime(void);
 
 #if defined(OPENSSL_ARM)
 // CRYPTO_has_broken_NEON returns one if the current CPU is known to have a
@@ -141,43 +133,41 @@ OPENSSL_EXPORT int CRYPTO_has_broken_NEON(void);
 // workaround was needed. See https://crbug.com/boringssl/46.
 OPENSSL_EXPORT int CRYPTO_needs_hwcap2_workaround(void);
 #endif
+#endif  // !OPENSSL_STATIC_ARMCAP
 
-// CRYPTO_is_ARMv8_AES_capable returns true if the current CPU supports the
-// ARMv8 AES instruction.
-int CRYPTO_is_ARMv8_AES_capable(void);
-
-// CRYPTO_is_ARMv8_PMULL_capable returns true if the current CPU supports the
-// ARMv8 PMULL instruction.
-int CRYPTO_is_ARMv8_PMULL_capable(void);
-
-#else
-
+// CRYPTO_is_NEON_capable returns true if the current CPU has a NEON unit. If
+// this is known statically, it is a constant inline function.
 OPENSSL_INLINE int CRYPTO_is_NEON_capable(void) {
-#if defined(OPENSSL_STATIC_ARMCAP_NEON) || \
-    (defined(__ARM_NEON__) || defined(__ARM_NEON))
+#if defined(__ARM_NEON__) || defined(__ARM_NEON) || \
+    defined(OPENSSL_STATIC_ARMCAP_NEON)
   return 1;
-#else
+#elif defined(OPENSSL_STATIC_ARMCAP)
   return 0;
+#else
+  return CRYPTO_is_NEON_capable_at_runtime();
 #endif
 }
 
 OPENSSL_INLINE int CRYPTO_is_ARMv8_AES_capable(void) {
 #if defined(OPENSSL_STATIC_ARMCAP_AES) || defined(__ARM_FEATURE_CRYPTO)
   return 1;
-#else
+#elif defined(OPENSSL_STATIC_ARMCAP)
   return 0;
+#else
+  return CRYPTO_is_ARMv8_AES_capable_at_runtime();
 #endif
 }
 
 OPENSSL_INLINE int CRYPTO_is_ARMv8_PMULL_capable(void) {
 #if defined(OPENSSL_STATIC_ARMCAP_PMULL) || defined(__ARM_FEATURE_CRYPTO)
   return 1;
-#else
+#elif defined(OPENSSL_STATIC_ARMCAP)
   return 0;
+#else
+  return CRYPTO_is_ARMv8_PMULL_capable_at_runtime();
 #endif
 }
 
-#endif  // OPENSSL_STATIC_ARMCAP
 #endif  // OPENSSL_ARM || OPENSSL_AARCH64
 
 #if defined(OPENSSL_PPC64LE)

data/third_party/boringssl-with-bazel/src/include/openssl/crypto.h

@@ -55,10 +55,6 @@ OPENSSL_EXPORT int CRYPTO_is_confidential_build(void);
 // in which case it returns zero.
 OPENSSL_EXPORT int CRYPTO_has_asm(void);
 
-// FIPS_mode returns zero unless BoringSSL is built with BORINGSSL_FIPS, in
-// which case it returns one.
-OPENSSL_EXPORT int FIPS_mode(void);
-
 // BORINGSSL_self_test triggers the FIPS KAT-based self tests. It returns one on
 // success and zero on error.
 OPENSSL_EXPORT int BORINGSSL_self_test(void);
@@ -72,6 +68,30 @@ OPENSSL_EXPORT int BORINGSSL_self_test(void);
 OPENSSL_EXPORT void CRYPTO_pre_sandbox_init(void);
 
 
+// FIPS monitoring
+
+// FIPS_mode returns zero unless BoringSSL is built with BORINGSSL_FIPS, in
+// which case it returns one.
+OPENSSL_EXPORT int FIPS_mode(void);
+
+// fips_counter_t denotes specific APIs/algorithms. A counter is maintained for
+// each in FIPS mode so that tests can be written to assert that the expected,
+// FIPS functions are being called by a certain peice of code.
+enum fips_counter_t {
+  fips_counter_evp_aes_128_gcm = 0,
+  fips_counter_evp_aes_256_gcm = 1,
+  fips_counter_evp_aes_128_ctr = 2,
+  fips_counter_evp_aes_256_ctr = 3,
+
+  fips_counter_max = 3,
+};
+
+// FIPS_read_counter returns a counter of the number of times the specific
+// function denoted by |counter| has been used. This always returns zero unless
+// BoringSSL was built with BORINGSSL_FIPS_COUNTERS defined.
+OPENSSL_EXPORT size_t FIPS_read_counter(enum fips_counter_t counter);
+
+
 // Deprecated functions.
 
 // OPENSSL_VERSION_TEXT contains a string the identifies the version of

data/third_party/boringssl-with-bazel/src/include/openssl/dh.h

@@ -59,7 +59,6 @@
 
 #include <openssl/base.h>
 
-#include <openssl/ex_data.h>
 #include <openssl/thread.h>
 
 #if defined(__cplusplus)
@@ -140,6 +139,11 @@ OPENSSL_EXPORT int DH_set_length(DH *dh, unsigned priv_length);
 // and returned. It returns NULL on allocation failure.
 OPENSSL_EXPORT BIGNUM *BN_get_rfc3526_prime_1536(BIGNUM *ret);
 
+// DH_get_rfc7919_2048 returns the group `ffdhe2048` from
+// https://tools.ietf.org/html/rfc7919#appendix-A.1. It returns NULL if out
+// of memory.
+OPENSSL_EXPORT DH *DH_get_rfc7919_2048(void);
+
 
 // Parameter generation.
 
@@ -164,20 +168,37 @@ OPENSSL_EXPORT int DH_generate_parameters_ex(DH *dh, int prime_bits,
 // |dh|. It returns one on success and zero on error.
 OPENSSL_EXPORT int DH_generate_key(DH *dh);
 
-// DH_compute_key calculates the shared key between |dh| and |peers_key| and
-// writes it as a big-endian integer into |out|, which must have |DH_size|
-// bytes of space. It returns the number of bytes written, or a negative number
-// on error.
+// DH_compute_key_padded calculates the shared key between |dh| and |peers_key|
+// and writes it as a big-endian integer into |out|, padded up to |DH_size|
+// bytes. It returns the number of bytes written, which is always |DH_size|, or
+// a negative number on error. |out| must have |DH_size| bytes of space.
 //
-// Note the output may be shorter than |DH_size| bytes. Contrary to PKCS #3,
-// this function returns a variable-length shared key with leading zeros
-// removed. This may result in sporadic key mismatch and, if |dh| is reused,
-// side channel attacks such as https://raccoon-attack.com/.
+// WARNING: this differs from the usual BoringSSL return-value convention.
 //
-// This is a legacy algorithm, so we do not provide a fixed-width variant. Use
-// X25519 or ECDH with P-256 instead.
-OPENSSL_EXPORT int DH_compute_key(uint8_t *out, const BIGNUM *peers_key,
-                                  DH *dh);
+// Note this function differs from |DH_compute_key| in that it preserves leading
+// zeros in the secret. This function is the preferred variant. It matches PKCS
+// #3 and avoids some side channel attacks. However, the two functions are not
+// drop-in replacements for each other. Using a different variant than the
+// application expects will result in sporadic key mismatches.
+//
+// Callers that expect a fixed-width secret should use this function over
+// |DH_compute_key|. Callers that use either function should migrate to a modern
+// primitive such as X25519 or ECDH with P-256 instead.
+OPENSSL_EXPORT int DH_compute_key_padded(uint8_t *out, const BIGNUM *peers_key,
+                                         DH *dh);
+
+// DH_compute_key_hashed calculates the shared key between |dh| and |peers_key|
+// and hashes it with the given |digest|. If the hash output is less than
+// |max_out_len| bytes then it writes the hash output to |out| and sets
+// |*out_len| to the number of bytes written. Otherwise it signals an error. It
+// returns one on success or zero on error.
+//
+// NOTE: this follows the usual BoringSSL return-value convention, but that's
+// different from |DH_compute_key| and |DH_compute_key_padded|.
+OPENSSL_EXPORT int DH_compute_key_hashed(DH *dh, uint8_t *out, size_t *out_len,
+                                         size_t max_out_len,
+                                         const BIGNUM *peers_key,
+                                         const EVP_MD *digest);
 
 
 // Utility functions.
@@ -237,18 +258,6 @@ OPENSSL_EXPORT DH *DH_parse_parameters(CBS *cbs);
 OPENSSL_EXPORT int DH_marshal_parameters(CBB *cbb, const DH *dh);
 
 
-// ex_data functions.
-//
-// See |ex_data.h| for details.
-
-OPENSSL_EXPORT int DH_get_ex_new_index(long argl, void *argp,
-                                       CRYPTO_EX_unused *unused,
-                                       CRYPTO_EX_dup *dup_unused,
-                                       CRYPTO_EX_free *free_func);
-OPENSSL_EXPORT int DH_set_ex_data(DH *d, int idx, void *arg);
-OPENSSL_EXPORT void *DH_get_ex_data(DH *d, int idx);
-
-
 // Deprecated functions.
 
 // DH_generate_parameters behaves like |DH_generate_parameters_ex|, which is
@@ -258,26 +267,40 @@ OPENSSL_EXPORT DH *DH_generate_parameters(int prime_len, int generator,
                                           void (*callback)(int, int, void *),
                                           void *cb_arg);
 
-// d2i_DHparams parses an ASN.1, DER encoded Diffie-Hellman parameters structure
-// from |len| bytes at |*inp|. If |ret| is not NULL then, on exit, a pointer to
-// the result is in |*ret|. Note that, even if |*ret| is already non-NULL on
-// entry, it will not be written to. Rather, a fresh |DH| is allocated and the
-// previous one is freed.
-//
-// On successful exit, |*inp| is advanced past the DER structure. It
-// returns the result or NULL on error.
+// d2i_DHparams parses a DER-encoded DHParameter structure (PKCS #3) from |len|
+// bytes at |*inp|, as in |d2i_SAMPLE|.
 //
 // Use |DH_parse_parameters| instead.
 OPENSSL_EXPORT DH *d2i_DHparams(DH **ret, const unsigned char **inp, long len);
 
-// i2d_DHparams marshals |in| to an ASN.1, DER structure. If |outp| is not NULL
-// then the result is written to |*outp| and |*outp| is advanced just past the
-// output. It returns the number of bytes in the result, whether written or
-// not, or a negative value on error.
+// i2d_DHparams marshals |in| to a DER-encoded DHParameter structure (PKCS #3),
+// as described in |i2d_SAMPLE|.
 //
 // Use |DH_marshal_parameters| instead.
 OPENSSL_EXPORT int i2d_DHparams(const DH *in, unsigned char **outp);
 
+// DH_compute_key behaves like |DH_compute_key_padded| but, contrary to PKCS #3,
+// returns a variable-length shared key with leading zeros. It returns the
+// number of bytes written, or a negative number on error. |out| must have
+// |DH_size| bytes of space.
+//
+// WARNING: this differs from the usual BoringSSL return-value convention.
+//
+// Note this function's running time and memory access pattern leaks information
+// about the shared secret. Particularly if |dh| is reused, this may result in
+// side channel attacks such as https://raccoon-attack.com/.
+//
+// |DH_compute_key_padded| is the preferred variant and avoids the above
+// attacks. However, the two functions are not drop-in replacements for each
+// other. Using a different variant than the application expects will result in
+// sporadic key mismatches.
+//
+// Callers that expect a fixed-width secret should use |DH_compute_key_padded|
+// instead. Callers that use either function should migrate to a modern
+// primitive such as X25519 or ECDH with P-256 instead.
+OPENSSL_EXPORT int DH_compute_key(uint8_t *out, const BIGNUM *peers_key,
+                                  DH *dh);
+
 
 struct dh_st {
   BIGNUM *p;
@@ -301,7 +324,6 @@ struct dh_st {
 
   int flags;
   CRYPTO_refcount_t references;
-  CRYPTO_EX_DATA ex_data;
 };
 
 

data/third_party/boringssl-with-bazel/src/include/openssl/digest.h

@@ -84,6 +84,7 @@ OPENSSL_EXPORT const EVP_MD *EVP_sha256(void);
 OPENSSL_EXPORT const EVP_MD *EVP_sha384(void);
 OPENSSL_EXPORT const EVP_MD *EVP_sha512(void);
 OPENSSL_EXPORT const EVP_MD *EVP_sha512_256(void);
+OPENSSL_EXPORT const EVP_MD *EVP_blake2b256(void);
 
 // EVP_md5_sha1 is a TLS-specific |EVP_MD| which computes the concatenation of
 // MD5 and SHA-1, as used in TLS 1.1 and below.
@@ -123,6 +124,10 @@ OPENSSL_EXPORT void EVP_MD_CTX_free(EVP_MD_CTX *ctx);
 // copy of |in|. It returns one on success and zero on allocation failure.
 OPENSSL_EXPORT int EVP_MD_CTX_copy_ex(EVP_MD_CTX *out, const EVP_MD_CTX *in);
 
+// EVP_MD_CTX_move sets |out|, which must already be initialised, to the hash
+// state in |in|. |in| is mutated and left in an empty state.
+OPENSSL_EXPORT void EVP_MD_CTX_move(EVP_MD_CTX *out, EVP_MD_CTX *in);
+
 // EVP_MD_CTX_reset calls |EVP_MD_CTX_cleanup| followed by |EVP_MD_CTX_init|. It
 // returns one.
 OPENSSL_EXPORT int EVP_MD_CTX_reset(EVP_MD_CTX *ctx);
@@ -292,6 +297,9 @@ OPENSSL_EXPORT void EVP_MD_CTX_set_flags(EVP_MD_CTX *ctx, int flags);
 // their needs). Thus this exists only to allow code to compile.
 #define EVP_MD_CTX_FLAG_NON_FIPS_ALLOW 0
 
+// EVP_MD_nid calls |EVP_MD_type|.
+OPENSSL_EXPORT int EVP_MD_nid(const EVP_MD *md);
+
 
 struct evp_md_pctx_ops;
 
@@ -323,8 +331,8 @@ BSSL_NAMESPACE_BEGIN
 BORINGSSL_MAKE_DELETER(EVP_MD_CTX, EVP_MD_CTX_free)
 
 using ScopedEVP_MD_CTX =
-    internal::StackAllocated<EVP_MD_CTX, int, EVP_MD_CTX_init,
-                             EVP_MD_CTX_cleanup>;
+    internal::StackAllocatedMovable<EVP_MD_CTX, int, EVP_MD_CTX_init,
+                                    EVP_MD_CTX_cleanup, EVP_MD_CTX_move>;
 
 BSSL_NAMESPACE_END
 

data/third_party/boringssl-with-bazel/src/include/openssl/dsa.h

@@ -189,6 +189,16 @@ OPENSSL_EXPORT DSA_SIG *DSA_SIG_new(void);
 // DSA_SIG_free frees the contents of |sig| and then frees |sig| itself.
 OPENSSL_EXPORT void DSA_SIG_free(DSA_SIG *sig);
 
+// DSA_SIG_get0 sets |*out_r| and |*out_s|, if non-NULL, to the two components
+// of |sig|.
+OPENSSL_EXPORT void DSA_SIG_get0(const DSA_SIG *sig, const BIGNUM **out_r,
+                                 const BIGNUM **out_s);
+
+// DSA_SIG_set0 sets |sig|'s components to |r| and |s|, neither of which may be
+// NULL. On success, it takes ownership of each argument and returns one.
+// Otherwise, it returns zero.
+OPENSSL_EXPORT int DSA_SIG_set0(DSA_SIG *sig, BIGNUM *r, BIGNUM *s);
+
 // DSA_do_sign returns a signature of the hash in |digest| by the key in |dsa|
 // and returns an allocated, DSA_SIG structure, or NULL on error.
 OPENSSL_EXPORT DSA_SIG *DSA_do_sign(const uint8_t *digest, size_t digest_len,
@@ -299,7 +309,7 @@ OPENSSL_EXPORT int DSA_marshal_private_key(CBB *cbb, const DSA *dsa);
 OPENSSL_EXPORT DSA *DSA_parse_parameters(CBS *cbs);
 
 // DSA_marshal_parameters marshals |dsa| as a DER-encoded Dss-Parms structure
-// (RFC 3447) and appends the result to |cbb|. It returns one on success and
+// (RFC 3279) and appends the result to |cbb|. It returns one on success and
 // zero on failure.
 OPENSSL_EXPORT int DSA_marshal_parameters(CBB *cbb, const DSA *dsa);
 
@@ -326,75 +336,51 @@ OPENSSL_EXPORT void *DSA_get_ex_data(const DSA *dsa, int idx);
 
 // Deprecated functions.
 
-// d2i_DSA_SIG parses an ASN.1, DER-encoded, DSA signature from |len| bytes at
-// |*inp|. If |out_sig| is not NULL then, on exit, a pointer to the result is
-// in |*out_sig|. Note that, even if |*out_sig| is already non-NULL on entry, it
-// will not be written to. Rather, a fresh |DSA_SIG| is allocated and the
-// previous one is freed. On successful exit, |*inp| is advanced past the DER
-// structure. It returns the result or NULL on error.
+// d2i_DSA_SIG parses a DER-encoded DSA-Sig-Value structure from |len| bytes at
+// |*inp|, as described in |d2i_SAMPLE|.
 //
 // Use |DSA_SIG_parse| instead.
 OPENSSL_EXPORT DSA_SIG *d2i_DSA_SIG(DSA_SIG **out_sig, const uint8_t **inp,
                                     long len);
 
-// i2d_DSA_SIG marshals |in| to an ASN.1, DER structure. If |outp| is not NULL
-// then the result is written to |*outp| and |*outp| is advanced just past the
-// output. It returns the number of bytes in the result, whether written or not,
-// or a negative value on error.
+// i2d_DSA_SIG marshals |in| to a DER-encoded DSA-Sig-Value structure, as
+// described in |i2d_SAMPLE|.
 //
 // Use |DSA_SIG_marshal| instead.
 OPENSSL_EXPORT int i2d_DSA_SIG(const DSA_SIG *in, uint8_t **outp);
 
-// d2i_DSAPublicKey parses an ASN.1, DER-encoded, DSA public key from |len|
-// bytes at |*inp|. If |out| is not NULL then, on exit, a pointer to the result
-// is in |*out|. Note that, even if |*ou| is already non-NULL on entry, it will
-// not be written to. Rather, a fresh |DSA| is allocated and the previous one is
-// freed. On successful exit, |*inp| is advanced past the DER structure. It
-// returns the result or NULL on error.
+// d2i_DSAPublicKey parses a DER-encoded DSA public key from |len| bytes at
+// |*inp|, as described in |d2i_SAMPLE|.
 //
 // Use |DSA_parse_public_key| instead.
 OPENSSL_EXPORT DSA *d2i_DSAPublicKey(DSA **out, const uint8_t **inp, long len);
 
-// i2d_DSAPublicKey marshals a public key from |in| to an ASN.1, DER structure.
-// If |outp| is not NULL then the result is written to |*outp| and |*outp| is
-// advanced just past the output. It returns the number of bytes in the result,
-// whether written or not, or a negative value on error.
+// i2d_DSAPublicKey marshals |in| as a DER-encoded DSA public key, as described
+// in |i2d_SAMPLE|.
 //
 // Use |DSA_marshal_public_key| instead.
 OPENSSL_EXPORT int i2d_DSAPublicKey(const DSA *in, uint8_t **outp);
 
-// d2i_DSAPrivateKey parses an ASN.1, DER-encoded, DSA private key from |len|
-// bytes at |*inp|. If |out| is not NULL then, on exit, a pointer to the result
-// is in |*out|. Note that, even if |*out| is already non-NULL on entry, it will
-// not be written to. Rather, a fresh |DSA| is allocated and the previous one is
-// freed. On successful exit, |*inp| is advanced past the DER structure. It
-// returns the result or NULL on error.
+// d2i_DSAPrivateKey parses a DER-encoded DSA private key from |len| bytes at
+// |*inp|, as described in |d2i_SAMPLE|.
 //
 // Use |DSA_parse_private_key| instead.
 OPENSSL_EXPORT DSA *d2i_DSAPrivateKey(DSA **out, const uint8_t **inp, long len);
 
-// i2d_DSAPrivateKey marshals a private key from |in| to an ASN.1, DER
-// structure. If |outp| is not NULL then the result is written to |*outp| and
-// |*outp| is advanced just past the output. It returns the number of bytes in
-// the result, whether written or not, or a negative value on error.
+// i2d_DSAPrivateKey marshals |in| as a DER-encoded DSA private key, as
+// described in |i2d_SAMPLE|.
 //
 // Use |DSA_marshal_private_key| instead.
 OPENSSL_EXPORT int i2d_DSAPrivateKey(const DSA *in, uint8_t **outp);
 
-// d2i_DSAparams parses ASN.1, DER-encoded, DSA parameters from |len| bytes at
-// |*inp|. If |out| is not NULL then, on exit, a pointer to the result is in
-// |*out|. Note that, even if |*out| is already non-NULL on entry, it will not
-// be written to. Rather, a fresh |DSA| is allocated and the previous one is
-// freed. On successful exit, |*inp| is advanced past the DER structure. It
-// returns the result or NULL on error.
+// d2i_DSAparams parses a DER-encoded Dss-Parms structure (RFC 3279) from |len|
+// bytes at |*inp|, as described in |d2i_SAMPLE|.
 //
 // Use |DSA_parse_parameters| instead.
 OPENSSL_EXPORT DSA *d2i_DSAparams(DSA **out, const uint8_t **inp, long len);
 
-// i2d_DSAparams marshals DSA parameters from |in| to an ASN.1, DER structure.
-// If |outp| is not NULL then the result is written to |*outp| and |*outp| is
-// advanced just past the output. It returns the number of bytes in the result,
-// whether written or not, or a negative value on error.
+// i2d_DSAparams marshals |in|'s parameters as a DER-encoded Dss-Parms structure
+// (RFC 3279), as described in |i2d_SAMPLE|.
 //
 // Use |DSA_marshal_parameters| instead.
 OPENSSL_EXPORT int i2d_DSAparams(const DSA *in, uint8_t **outp);