grpc 1.34.0 → 1.42.0

data/third_party/abseil-cpp/absl/time/clock.cc

@@ -15,6 +15,7 @@
 #include "absl/time/clock.h"
 
 #include "absl/base/attributes.h"
+#include "absl/base/optimization.h"
 
 #ifdef _WIN32
 #include <windows.h>
@@ -74,9 +75,7 @@ ABSL_NAMESPACE_END
 #if !ABSL_USE_CYCLECLOCK_FOR_GET_CURRENT_TIME_NANOS
 namespace absl {
 ABSL_NAMESPACE_BEGIN
-int64_t GetCurrentTimeNanos() {
-  return GET_CURRENT_TIME_NANOS_FROM_SYSTEM();
-}
+int64_t GetCurrentTimeNanos() { return GET_CURRENT_TIME_NANOS_FROM_SYSTEM(); }
 ABSL_NAMESPACE_END
 }  // namespace absl
 #else  // Use the cyclecounter-based implementation below.
@@ -87,13 +86,6 @@ ABSL_NAMESPACE_END
   ::absl::time_internal::UnscaledCycleClockWrapperForGetCurrentTime::Now()
 #endif
 
-// The following counters are used only by the test code.
-static int64_t stats_initializations;
-static int64_t stats_reinitializations;
-static int64_t stats_calibrations;
-static int64_t stats_slow_paths;
-static int64_t stats_fast_slow_paths;
-
 namespace absl {
 ABSL_NAMESPACE_BEGIN
 namespace time_internal {
@@ -107,72 +99,6 @@ class UnscaledCycleClockWrapperForGetCurrentTime {
 
 // uint64_t is used in this module to provide an extra bit in multiplications
 
-// Return the time in ns as told by the kernel interface.  Place in *cycleclock
-// the value of the cycleclock at about the time of the syscall.
-// This call represents the time base that this module synchronizes to.
-// Ensures that *cycleclock does not step back by up to (1 << 16) from
-// last_cycleclock, to discard small backward counter steps.  (Larger steps are
-// assumed to be complete resyncs, which shouldn't happen.  If they do, a full
-// reinitialization of the outer algorithm should occur.)
-static int64_t GetCurrentTimeNanosFromKernel(uint64_t last_cycleclock,
-                                             uint64_t *cycleclock) {
-  // We try to read clock values at about the same time as the kernel clock.
-  // This value gets adjusted up or down as estimate of how long that should
-  // take, so we can reject attempts that take unusually long.
-  static std::atomic<uint64_t> approx_syscall_time_in_cycles{10 * 1000};
-
-  uint64_t local_approx_syscall_time_in_cycles =  // local copy
-      approx_syscall_time_in_cycles.load(std::memory_order_relaxed);
-
-  int64_t current_time_nanos_from_system;
-  uint64_t before_cycles;
-  uint64_t after_cycles;
-  uint64_t elapsed_cycles;
-  int loops = 0;
-  do {
-    before_cycles = GET_CURRENT_TIME_NANOS_CYCLECLOCK_NOW();
-    current_time_nanos_from_system = GET_CURRENT_TIME_NANOS_FROM_SYSTEM();
-    after_cycles = GET_CURRENT_TIME_NANOS_CYCLECLOCK_NOW();
-    // elapsed_cycles is unsigned, so is large on overflow
-    elapsed_cycles = after_cycles - before_cycles;
-    if (elapsed_cycles >= local_approx_syscall_time_in_cycles &&
-        ++loops == 20) {  // clock changed frequencies?  Back off.
-      loops = 0;
-      if (local_approx_syscall_time_in_cycles < 1000 * 1000) {
-        local_approx_syscall_time_in_cycles =
-            (local_approx_syscall_time_in_cycles + 1) << 1;
-      }
-      approx_syscall_time_in_cycles.store(
-          local_approx_syscall_time_in_cycles,
-          std::memory_order_relaxed);
-    }
-  } while (elapsed_cycles >= local_approx_syscall_time_in_cycles ||
-           last_cycleclock - after_cycles < (static_cast<uint64_t>(1) << 16));
-
-  // Number of times in a row we've seen a kernel time call take substantially
-  // less than approx_syscall_time_in_cycles.
-  static std::atomic<uint32_t> seen_smaller{ 0 };
-
-  // Adjust approx_syscall_time_in_cycles to be within a factor of 2
-  // of the typical time to execute one iteration of the loop above.
-  if ((local_approx_syscall_time_in_cycles >> 1) < elapsed_cycles) {
-    // measured time is no smaller than half current approximation
-    seen_smaller.store(0, std::memory_order_relaxed);
-  } else if (seen_smaller.fetch_add(1, std::memory_order_relaxed) >= 3) {
-    // smaller delays several times in a row; reduce approximation by 12.5%
-    const uint64_t new_approximation =
-        local_approx_syscall_time_in_cycles -
-        (local_approx_syscall_time_in_cycles >> 3);
-    approx_syscall_time_in_cycles.store(new_approximation,
-                                        std::memory_order_relaxed);
-    seen_smaller.store(0, std::memory_order_relaxed);
-  }
-
-  *cycleclock = after_cycles;
-  return current_time_nanos_from_system;
-}
-
-
 // ---------------------------------------------------------------------
 // An implementation of reader-write locks that use no atomic ops in the read
 // case.  This is a generalization of Lamport's method for reading a multiword
@@ -224,32 +150,110 @@ static_assert(((kMinNSBetweenSamples << (kScale + 1)) >> (kScale + 1)) ==
                kMinNSBetweenSamples,
                "cannot represent kMaxBetweenSamplesNSScaled");
 
-// A reader-writer lock protecting the static locations below.
-// See SeqAcquire() and SeqRelease() above.
-ABSL_CONST_INIT static absl::base_internal::SpinLock lock(
-    absl::kConstInit, base_internal::SCHEDULE_KERNEL_ONLY);
-ABSL_CONST_INIT static std::atomic<uint64_t> seq(0);
-
 // data from a sample of the kernel's time value
 struct TimeSampleAtomic {
-  std::atomic<uint64_t> raw_ns;              // raw kernel time
-  std::atomic<uint64_t> base_ns;             // our estimate of time
-  std::atomic<uint64_t> base_cycles;         // cycle counter reading
-  std::atomic<uint64_t> nsscaled_per_cycle;  // cycle period
+  std::atomic<uint64_t> raw_ns{0};              // raw kernel time
+  std::atomic<uint64_t> base_ns{0};             // our estimate of time
+  std::atomic<uint64_t> base_cycles{0};         // cycle counter reading
+  std::atomic<uint64_t> nsscaled_per_cycle{0};  // cycle period
   // cycles before we'll sample again (a scaled reciprocal of the period,
   // to avoid a division on the fast path).
-  std::atomic<uint64_t> min_cycles_per_sample;
+  std::atomic<uint64_t> min_cycles_per_sample{0};
 };
 // Same again, but with non-atomic types
 struct TimeSample {
-  uint64_t raw_ns;                 // raw kernel time
-  uint64_t base_ns;                // our estimate of time
-  uint64_t base_cycles;            // cycle counter reading
-  uint64_t nsscaled_per_cycle;     // cycle period
-  uint64_t min_cycles_per_sample;  // approx cycles before next sample
+  uint64_t raw_ns = 0;                 // raw kernel time
+  uint64_t base_ns = 0;                // our estimate of time
+  uint64_t base_cycles = 0;            // cycle counter reading
+  uint64_t nsscaled_per_cycle = 0;     // cycle period
+  uint64_t min_cycles_per_sample = 0;  // approx cycles before next sample
 };
 
-static struct TimeSampleAtomic last_sample;   // the last sample; under seq
+struct ABSL_CACHELINE_ALIGNED TimeState {
+  std::atomic<uint64_t> seq{0};
+  TimeSampleAtomic last_sample;  // the last sample; under seq
+
+  // The following counters are used only by the test code.
+  int64_t stats_initializations{0};
+  int64_t stats_reinitializations{0};
+  int64_t stats_calibrations{0};
+  int64_t stats_slow_paths{0};
+  int64_t stats_fast_slow_paths{0};
+
+  uint64_t last_now_cycles ABSL_GUARDED_BY(lock){0};
+
+  // Used by GetCurrentTimeNanosFromKernel().
+  // We try to read clock values at about the same time as the kernel clock.
+  // This value gets adjusted up or down as estimate of how long that should
+  // take, so we can reject attempts that take unusually long.
+  std::atomic<uint64_t> approx_syscall_time_in_cycles{10 * 1000};
+  // Number of times in a row we've seen a kernel time call take substantially
+  // less than approx_syscall_time_in_cycles.
+  std::atomic<uint32_t> kernel_time_seen_smaller{0};
+
+  // A reader-writer lock protecting the static locations below.
+  // See SeqAcquire() and SeqRelease() above.
+  absl::base_internal::SpinLock lock{absl::kConstInit,
+                                     base_internal::SCHEDULE_KERNEL_ONLY};
+};
+ABSL_CONST_INIT static TimeState time_state{};
+
+// Return the time in ns as told by the kernel interface.  Place in *cycleclock
+// the value of the cycleclock at about the time of the syscall.
+// This call represents the time base that this module synchronizes to.
+// Ensures that *cycleclock does not step back by up to (1 << 16) from
+// last_cycleclock, to discard small backward counter steps.  (Larger steps are
+// assumed to be complete resyncs, which shouldn't happen.  If they do, a full
+// reinitialization of the outer algorithm should occur.)
+static int64_t GetCurrentTimeNanosFromKernel(uint64_t last_cycleclock,
+                                             uint64_t *cycleclock)
+    ABSL_EXCLUSIVE_LOCKS_REQUIRED(time_state.lock) {
+  uint64_t local_approx_syscall_time_in_cycles =  // local copy
+      time_state.approx_syscall_time_in_cycles.load(std::memory_order_relaxed);
+
+  int64_t current_time_nanos_from_system;
+  uint64_t before_cycles;
+  uint64_t after_cycles;
+  uint64_t elapsed_cycles;
+  int loops = 0;
+  do {
+    before_cycles = GET_CURRENT_TIME_NANOS_CYCLECLOCK_NOW();
+    current_time_nanos_from_system = GET_CURRENT_TIME_NANOS_FROM_SYSTEM();
+    after_cycles = GET_CURRENT_TIME_NANOS_CYCLECLOCK_NOW();
+    // elapsed_cycles is unsigned, so is large on overflow
+    elapsed_cycles = after_cycles - before_cycles;
+    if (elapsed_cycles >= local_approx_syscall_time_in_cycles &&
+        ++loops == 20) {  // clock changed frequencies?  Back off.
+      loops = 0;
+      if (local_approx_syscall_time_in_cycles < 1000 * 1000) {
+        local_approx_syscall_time_in_cycles =
+            (local_approx_syscall_time_in_cycles + 1) << 1;
+      }
+      time_state.approx_syscall_time_in_cycles.store(
+          local_approx_syscall_time_in_cycles, std::memory_order_relaxed);
+    }
+  } while (elapsed_cycles >= local_approx_syscall_time_in_cycles ||
+           last_cycleclock - after_cycles < (static_cast<uint64_t>(1) << 16));
+
+  // Adjust approx_syscall_time_in_cycles to be within a factor of 2
+  // of the typical time to execute one iteration of the loop above.
+  if ((local_approx_syscall_time_in_cycles >> 1) < elapsed_cycles) {
+    // measured time is no smaller than half current approximation
+    time_state.kernel_time_seen_smaller.store(0, std::memory_order_relaxed);
+  } else if (time_state.kernel_time_seen_smaller.fetch_add(
+                 1, std::memory_order_relaxed) >= 3) {
+    // smaller delays several times in a row; reduce approximation by 12.5%
+    const uint64_t new_approximation =
+        local_approx_syscall_time_in_cycles -
+        (local_approx_syscall_time_in_cycles >> 3);
+    time_state.approx_syscall_time_in_cycles.store(new_approximation,
+                                                   std::memory_order_relaxed);
+    time_state.kernel_time_seen_smaller.store(0, std::memory_order_relaxed);
+  }
+
+  *cycleclock = after_cycles;
+  return current_time_nanos_from_system;
+}
 
 static int64_t GetCurrentTimeNanosSlowPath() ABSL_ATTRIBUTE_COLD;
 
@@ -317,14 +321,15 @@ int64_t GetCurrentTimeNanos() {
   // Acquire pairs with the barrier in SeqRelease - if this load sees that
   // store, the shared-data reads necessarily see that SeqRelease's updates
   // to the same shared data.
-  seq_read0 = seq.load(std::memory_order_acquire);
+  seq_read0 = time_state.seq.load(std::memory_order_acquire);
 
-  base_ns = last_sample.base_ns.load(std::memory_order_relaxed);
-  base_cycles = last_sample.base_cycles.load(std::memory_order_relaxed);
+  base_ns = time_state.last_sample.base_ns.load(std::memory_order_relaxed);
+  base_cycles =
+      time_state.last_sample.base_cycles.load(std::memory_order_relaxed);
   nsscaled_per_cycle =
-      last_sample.nsscaled_per_cycle.load(std::memory_order_relaxed);
-  min_cycles_per_sample =
-      last_sample.min_cycles_per_sample.load(std::memory_order_relaxed);
+      time_state.last_sample.nsscaled_per_cycle.load(std::memory_order_relaxed);
+  min_cycles_per_sample = time_state.last_sample.min_cycles_per_sample.load(
+      std::memory_order_relaxed);
 
   // This acquire fence pairs with the release fence in SeqAcquire.  Since it
   // is sequenced between reads of shared data and seq_read1, the reads of
@@ -335,7 +340,7 @@ int64_t GetCurrentTimeNanos() {
   // shared-data writes are effectively release ordered. Therefore if our
   // shared-data reads see any of a particular update's shared-data writes,
   // seq_read1 is guaranteed to see that update's SeqAcquire.
-  seq_read1 = seq.load(std::memory_order_relaxed);
+  seq_read1 = time_state.seq.load(std::memory_order_relaxed);
 
   // Fast path.  Return if min_cycles_per_sample has not yet elapsed since the
   // last sample, and we read a consistent sample.  The fast path activates
@@ -348,9 +353,9 @@ int64_t GetCurrentTimeNanos() {
   // last_sample was updated). This is harmless, because delta_cycles will wrap
   // and report a time much much bigger than min_cycles_per_sample. In that case
   // we will take the slow path.
-  uint64_t delta_cycles = now_cycles - base_cycles;
+  uint64_t delta_cycles;
   if (seq_read0 == seq_read1 && (seq_read0 & 1) == 0 &&
-      delta_cycles < min_cycles_per_sample) {
+      (delta_cycles = now_cycles - base_cycles) < min_cycles_per_sample) {
     return base_ns + ((delta_cycles * nsscaled_per_cycle) >> kScale);
   }
   return GetCurrentTimeNanosSlowPath();
@@ -390,24 +395,25 @@ static uint64_t UpdateLastSample(
 // TODO(absl-team): Remove this attribute when our compiler is smart enough
 // to do the right thing.
 ABSL_ATTRIBUTE_NOINLINE
-static int64_t GetCurrentTimeNanosSlowPath() ABSL_LOCKS_EXCLUDED(lock) {
+static int64_t GetCurrentTimeNanosSlowPath()
+    ABSL_LOCKS_EXCLUDED(time_state.lock) {
   // Serialize access to slow-path.  Fast-path readers are not blocked yet, and
   // code below must not modify last_sample until the seqlock is acquired.
-  lock.Lock();
+  time_state.lock.Lock();
 
   // Sample the kernel time base.  This is the definition of
   // "now" if we take the slow path.
-  static uint64_t last_now_cycles;  // protected by lock
   uint64_t now_cycles;
-  uint64_t now_ns = GetCurrentTimeNanosFromKernel(last_now_cycles, &now_cycles);
-  last_now_cycles = now_cycles;
+  uint64_t now_ns =
+      GetCurrentTimeNanosFromKernel(time_state.last_now_cycles, &now_cycles);
+  time_state.last_now_cycles = now_cycles;
 
   uint64_t estimated_base_ns;
 
   // ----------
   // Read the "last_sample" values again; this time holding the write lock.
   struct TimeSample sample;
-  ReadTimeSampleAtomic(&last_sample, &sample);
+  ReadTimeSampleAtomic(&time_state.last_sample, &sample);
 
   // ----------
   // Try running the fast path again; another thread may have updated the
@@ -418,13 +424,13 @@ static int64_t GetCurrentTimeNanosSlowPath() ABSL_LOCKS_EXCLUDED(lock) {
     // so that blocked readers can make progress without blocking new readers.
     estimated_base_ns = sample.base_ns +
         ((delta_cycles * sample.nsscaled_per_cycle) >> kScale);
-    stats_fast_slow_paths++;
+    time_state.stats_fast_slow_paths++;
   } else {
     estimated_base_ns =
         UpdateLastSample(now_cycles, now_ns, delta_cycles, &sample);
   }
 
-  lock.Unlock();
+  time_state.lock.Unlock();
 
   return estimated_base_ns;
 }
@@ -435,9 +441,10 @@ static int64_t GetCurrentTimeNanosSlowPath() ABSL_LOCKS_EXCLUDED(lock) {
 static uint64_t UpdateLastSample(uint64_t now_cycles, uint64_t now_ns,
                                  uint64_t delta_cycles,
                                  const struct TimeSample *sample)
-    ABSL_EXCLUSIVE_LOCKS_REQUIRED(lock) {
+    ABSL_EXCLUSIVE_LOCKS_REQUIRED(time_state.lock) {
   uint64_t estimated_base_ns = now_ns;
-  uint64_t lock_value = SeqAcquire(&seq);  // acquire seqlock to block readers
+  uint64_t lock_value =
+      SeqAcquire(&time_state.seq);  // acquire seqlock to block readers
 
   // The 5s in the next if-statement limits the time for which we will trust
   // the cycle counter and our last sample to give a reasonable result.
@@ -447,12 +454,16 @@ static uint64_t UpdateLastSample(uint64_t now_cycles, uint64_t now_ns,
       sample->raw_ns + static_cast<uint64_t>(5) * 1000 * 1000 * 1000 < now_ns ||
       now_ns < sample->raw_ns || now_cycles < sample->base_cycles) {
     // record this sample, and forget any previously known slope.
-    last_sample.raw_ns.store(now_ns, std::memory_order_relaxed);
-    last_sample.base_ns.store(estimated_base_ns, std::memory_order_relaxed);
-    last_sample.base_cycles.store(now_cycles, std::memory_order_relaxed);
-    last_sample.nsscaled_per_cycle.store(0, std::memory_order_relaxed);
-    last_sample.min_cycles_per_sample.store(0, std::memory_order_relaxed);
-    stats_initializations++;
+    time_state.last_sample.raw_ns.store(now_ns, std::memory_order_relaxed);
+    time_state.last_sample.base_ns.store(estimated_base_ns,
+                                         std::memory_order_relaxed);
+    time_state.last_sample.base_cycles.store(now_cycles,
+                                             std::memory_order_relaxed);
+    time_state.last_sample.nsscaled_per_cycle.store(0,
+                                                    std::memory_order_relaxed);
+    time_state.last_sample.min_cycles_per_sample.store(
+        0, std::memory_order_relaxed);
+    time_state.stats_initializations++;
   } else if (sample->raw_ns + 500 * 1000 * 1000 < now_ns &&
              sample->base_cycles + 50 < now_cycles) {
     // Enough time has passed to compute the cycle time.
@@ -495,28 +506,32 @@ static uint64_t UpdateLastSample(uint64_t now_cycles, uint64_t now_ns,
     if (new_nsscaled_per_cycle != 0 &&
         diff_ns < 100 * 1000 * 1000 && -diff_ns < 100 * 1000 * 1000) {
       // record the cycle time measurement
-      last_sample.nsscaled_per_cycle.store(
+      time_state.last_sample.nsscaled_per_cycle.store(
           new_nsscaled_per_cycle, std::memory_order_relaxed);
       uint64_t new_min_cycles_per_sample =
           SafeDivideAndScale(kMinNSBetweenSamples, new_nsscaled_per_cycle);
-      last_sample.min_cycles_per_sample.store(
+      time_state.last_sample.min_cycles_per_sample.store(
           new_min_cycles_per_sample, std::memory_order_relaxed);
-      stats_calibrations++;
+      time_state.stats_calibrations++;
     } else {  // something went wrong; forget the slope
-      last_sample.nsscaled_per_cycle.store(0, std::memory_order_relaxed);
-      last_sample.min_cycles_per_sample.store(0, std::memory_order_relaxed);
+      time_state.last_sample.nsscaled_per_cycle.store(
+          0, std::memory_order_relaxed);
+      time_state.last_sample.min_cycles_per_sample.store(
+          0, std::memory_order_relaxed);
       estimated_base_ns = now_ns;
-      stats_reinitializations++;
+      time_state.stats_reinitializations++;
     }
-    last_sample.raw_ns.store(now_ns, std::memory_order_relaxed);
-    last_sample.base_ns.store(estimated_base_ns, std::memory_order_relaxed);
-    last_sample.base_cycles.store(now_cycles, std::memory_order_relaxed);
+    time_state.last_sample.raw_ns.store(now_ns, std::memory_order_relaxed);
+    time_state.last_sample.base_ns.store(estimated_base_ns,
+                                         std::memory_order_relaxed);
+    time_state.last_sample.base_cycles.store(now_cycles,
+                                             std::memory_order_relaxed);
   } else {
     // have a sample, but no slope; waiting for enough time for a calibration
-    stats_slow_paths++;
+    time_state.stats_slow_paths++;
   }
 
-  SeqRelease(&seq, lock_value);  // release the readers
+  SeqRelease(&time_state.seq, lock_value);  // release the readers
 
   return estimated_base_ns;
 }
@@ -558,7 +573,8 @@ ABSL_NAMESPACE_END
 
 extern "C" {
 
-ABSL_ATTRIBUTE_WEAK void AbslInternalSleepFor(absl::Duration duration) {
+ABSL_ATTRIBUTE_WEAK void ABSL_INTERNAL_C_SYMBOL(AbslInternalSleepFor)(
+    absl::Duration duration) {
   while (duration > absl::ZeroDuration()) {
     absl::Duration to_sleep = std::min(duration, absl::MaxSleep());
     absl::SleepOnce(to_sleep);

data/third_party/abseil-cpp/absl/time/clock.h

@@ -64,11 +64,11 @@ ABSL_NAMESPACE_END
 // By changing our extension points to be extern "C", we dodge this
 // check.
 extern "C" {
-void AbslInternalSleepFor(absl::Duration duration);
+void ABSL_INTERNAL_C_SYMBOL(AbslInternalSleepFor)(absl::Duration duration);
 }  // extern "C"
 
 inline void absl::SleepFor(absl::Duration duration) {
-  AbslInternalSleepFor(duration);
+  ABSL_INTERNAL_C_SYMBOL(AbslInternalSleepFor)(duration);
 }
 
 #endif  // ABSL_TIME_CLOCK_H_

data/third_party/abseil-cpp/absl/time/duration.cc

@@ -356,7 +356,7 @@ namespace time_internal {
 // the remainder.  If it does not saturate, the remainder remain accurate,
 // but the returned quotient will over/underflow int64_t and should not be used.
 int64_t IDivDuration(bool satq, const Duration num, const Duration den,
-                   Duration* rem) {
+                     Duration* rem) {
   int64_t q = 0;
   if (IDivFastPath(num, den, &q, rem)) {
     return q;
@@ -763,7 +763,8 @@ void AppendNumberUnit(std::string* out, double n, DisplayUnit unit) {
 //   form "72h3m0.5s". Leading zero units are omitted.  As a special
 //   case, durations less than one second format use a smaller unit
 //   (milli-, micro-, or nanoseconds) to ensure that the leading digit
-//   is non-zero.  The zero duration formats as 0, with no unit.
+//   is non-zero.
+// Unlike Go, we format the zero duration as 0, with no unit.
 std::string FormatDuration(Duration d) {
   const Duration min_duration = Seconds(kint64min);
   if (d == min_duration) {

data/third_party/abseil-cpp/absl/time/internal/cctz/include/cctz/civil_time_detail.h

@@ -416,16 +416,10 @@ class civil_time {
 
   // Assigning arithmetic.
   CONSTEXPR_M civil_time& operator+=(diff_t n) noexcept {
-    f_ = step(T{}, f_, n);
-    return *this;
+    return *this = *this + n;
   }
   CONSTEXPR_M civil_time& operator-=(diff_t n) noexcept {
-    if (n != (std::numeric_limits<diff_t>::min)()) {
-      f_ = step(T{}, f_, -n);
-    } else {
-      f_ = step(T{}, step(T{}, f_, -(n + 1)), 1);
-    }
-    return *this;
+    return *this = *this - n;
   }
   CONSTEXPR_M civil_time& operator++() noexcept { return *this += 1; }
   CONSTEXPR_M civil_time operator++(int) noexcept {
@@ -442,13 +436,15 @@ class civil_time {
 
   // Binary arithmetic operators.
   friend CONSTEXPR_F civil_time operator+(civil_time a, diff_t n) noexcept {
-    return a += n;
+    return civil_time(step(T{}, a.f_, n));
   }
   friend CONSTEXPR_F civil_time operator+(diff_t n, civil_time a) noexcept {
-    return a += n;
+    return a + n;
   }
   friend CONSTEXPR_F civil_time operator-(civil_time a, diff_t n) noexcept {
-    return a -= n;
+    return n != (std::numeric_limits<diff_t>::min)()
+               ? civil_time(step(T{}, a.f_, -n))
+               : civil_time(step(T{}, step(T{}, a.f_, -(n + 1)), 1));
   }
   friend CONSTEXPR_F diff_t operator-(civil_time lhs, civil_time rhs) noexcept {
     return difference(T{}, lhs.f_, rhs.f_);

data/third_party/abseil-cpp/absl/time/internal/cctz/src/time_zone_libc.cc

@@ -27,6 +27,12 @@
 #include "absl/time/internal/cctz/include/cctz/civil_time.h"
 #include "absl/time/internal/cctz/include/cctz/time_zone.h"
 
+#if defined(_AIX)
+extern "C" {
+extern long altzone;
+}
+#endif
+
 namespace absl {
 ABSL_NAMESPACE_BEGIN
 namespace time_internal {
@@ -44,7 +50,7 @@ auto tm_zone(const std::tm& tm) -> decltype(_tzname[0]) {
   const bool is_dst = tm.tm_isdst > 0;
   return _tzname[is_dst];
 }
-#elif defined(__sun)
+#elif defined(__sun) || defined(_AIX)
 // Uses the globals: 'timezone', 'altzone' and 'tzname'.
 auto tm_gmtoff(const std::tm& tm) -> decltype(timezone) {
   const bool is_dst = tm.tm_isdst > 0;

data/third_party/abseil-cpp/absl/time/internal/cctz/src/tzfile.h

@@ -108,15 +108,15 @@ struct tzhead {
 #ifndef TZ_MAX_TYPES
 /* This must be at least 17 for Europe/Samara and Europe/Vilnius.  */
 #define TZ_MAX_TYPES 256 /* Limited by what (unsigned char)'s can hold */
-#endif /* !defined TZ_MAX_TYPES */
+#endif                   /* !defined TZ_MAX_TYPES */
 
 #ifndef TZ_MAX_CHARS
 #define TZ_MAX_CHARS 50 /* Maximum number of abbreviation characters */
-/* (limited by what unsigned chars can hold) */
-#endif /* !defined TZ_MAX_CHARS */
+                        /* (limited by what unsigned chars can hold) */
+#endif                  /* !defined TZ_MAX_CHARS */
 
 #ifndef TZ_MAX_LEAPS
 #define TZ_MAX_LEAPS 50 /* Maximum number of leap second corrections */
-#endif /* !defined TZ_MAX_LEAPS */
+#endif                  /* !defined TZ_MAX_LEAPS */
 
 #endif /* !defined TZFILE_H */

data/third_party/abseil-cpp/absl/time/time.cc

@@ -60,9 +60,10 @@ inline cctz::time_point<cctz::seconds> unix_epoch() {
 inline int64_t FloorToUnit(absl::Duration d, absl::Duration unit) {
   absl::Duration rem;
   int64_t q = absl::IDivDuration(d, unit, &rem);
-  return (q > 0 ||
-          rem >= ZeroDuration() ||
-          q == std::numeric_limits<int64_t>::min()) ? q : q - 1;
+  return (q > 0 || rem >= ZeroDuration() ||
+          q == std::numeric_limits<int64_t>::min())
+             ? q
+             : q - 1;
 }
 
 inline absl::Time::Breakdown InfiniteFutureBreakdown() {

data/third_party/abseil-cpp/absl/time/time.h

@@ -458,12 +458,12 @@ Duration Hours(T n) {
 //
 //   absl::Duration d = absl::Milliseconds(1500);
 //   int64_t isec = absl::ToInt64Seconds(d);  // isec == 1
-int64_t ToInt64Nanoseconds(Duration d);
-int64_t ToInt64Microseconds(Duration d);
-int64_t ToInt64Milliseconds(Duration d);
-int64_t ToInt64Seconds(Duration d);
-int64_t ToInt64Minutes(Duration d);
-int64_t ToInt64Hours(Duration d);
+ABSL_ATTRIBUTE_PURE_FUNCTION int64_t ToInt64Nanoseconds(Duration d);
+ABSL_ATTRIBUTE_PURE_FUNCTION int64_t ToInt64Microseconds(Duration d);
+ABSL_ATTRIBUTE_PURE_FUNCTION int64_t ToInt64Milliseconds(Duration d);
+ABSL_ATTRIBUTE_PURE_FUNCTION int64_t ToInt64Seconds(Duration d);
+ABSL_ATTRIBUTE_PURE_FUNCTION int64_t ToInt64Minutes(Duration d);
+ABSL_ATTRIBUTE_PURE_FUNCTION int64_t ToInt64Hours(Duration d);
 
 // ToDoubleNanoSeconds()
 // ToDoubleMicroseconds()
@@ -480,12 +480,12 @@ int64_t ToInt64Hours(Duration d);
 //
 //   absl::Duration d = absl::Milliseconds(1500);
 //   double dsec = absl::ToDoubleSeconds(d);  // dsec == 1.5
-double ToDoubleNanoseconds(Duration d);
-double ToDoubleMicroseconds(Duration d);
-double ToDoubleMilliseconds(Duration d);
-double ToDoubleSeconds(Duration d);
-double ToDoubleMinutes(Duration d);
-double ToDoubleHours(Duration d);
+ABSL_ATTRIBUTE_PURE_FUNCTION double ToDoubleNanoseconds(Duration d);
+ABSL_ATTRIBUTE_PURE_FUNCTION double ToDoubleMicroseconds(Duration d);
+ABSL_ATTRIBUTE_PURE_FUNCTION double ToDoubleMilliseconds(Duration d);
+ABSL_ATTRIBUTE_PURE_FUNCTION double ToDoubleSeconds(Duration d);
+ABSL_ATTRIBUTE_PURE_FUNCTION double ToDoubleMinutes(Duration d);
+ABSL_ATTRIBUTE_PURE_FUNCTION double ToDoubleHours(Duration d);
 
 // FromChrono()
 //
@@ -639,7 +639,7 @@ class Time {
   // Deprecated. Use `absl::TimeZone::CivilInfo`.
   struct
       Breakdown {
-    int64_t year;          // year (e.g., 2013)
+    int64_t year;        // year (e.g., 2013)
     int month;           // month of year [1:12]
     int day;             // day of month [1:31]
     int hour;            // hour of day [0:23]
@@ -1180,11 +1180,15 @@ inline Time FromDateTime(int64_t year, int mon, int day, int hour,
 //
 // Converts the `tm_year`, `tm_mon`, `tm_mday`, `tm_hour`, `tm_min`, and
 // `tm_sec` fields to an `absl::Time` using the given time zone. See ctime(3)
-// for a description of the expected values of the tm fields. If the indicated
-// time instant is not unique (see `absl::TimeZone::At(absl::CivilSecond)`
-// above), the `tm_isdst` field is consulted to select the desired instant
-// (`tm_isdst` > 0 means DST, `tm_isdst` == 0 means no DST, `tm_isdst` < 0
-// means use the post-transition offset).
+// for a description of the expected values of the tm fields. If the civil time
+// is unique (see `absl::TimeZone::At(absl::CivilSecond)` above), the matching
+// time instant is returned.  Otherwise, the `tm_isdst` field is consulted to
+// choose between the possible results.  For a repeated civil time, `tm_isdst !=
+// 0` returns the matching DST instant, while `tm_isdst == 0` returns the
+// matching non-DST instant.  For a skipped civil time there is no matching
+// instant, so `tm_isdst != 0` returns the DST instant, and `tm_isdst == 0`
+// returns the non-DST instant, that would have matched if the transition never
+// happened.
 Time FromTM(const struct tm& tm, TimeZone tz);
 
 // ToTM()
@@ -1494,12 +1498,10 @@ constexpr Duration Hours(int64_t n) {
 constexpr bool operator<(Duration lhs, Duration rhs) {
   return time_internal::GetRepHi(lhs) != time_internal::GetRepHi(rhs)
              ? time_internal::GetRepHi(lhs) < time_internal::GetRepHi(rhs)
-             : time_internal::GetRepHi(lhs) ==
-                       (std::numeric_limits<int64_t>::min)()
-                   ? time_internal::GetRepLo(lhs) + 1 <
-                         time_internal::GetRepLo(rhs) + 1
-                   : time_internal::GetRepLo(lhs) <
-                         time_internal::GetRepLo(rhs);
+         : time_internal::GetRepHi(lhs) == (std::numeric_limits<int64_t>::min)()
+             ? time_internal::GetRepLo(lhs) + 1 <
+                   time_internal::GetRepLo(rhs) + 1
+             : time_internal::GetRepLo(lhs) < time_internal::GetRepLo(rhs);
 }
 
 constexpr bool operator==(Duration lhs, Duration rhs) {

data/third_party/abseil-cpp/absl/types/internal/variant.h

@@ -45,7 +45,7 @@ ABSL_NAMESPACE_BEGIN
 template <class... Types>
 class variant;
 
-ABSL_INTERNAL_INLINE_CONSTEXPR(size_t, variant_npos, -1);
+ABSL_INTERNAL_INLINE_CONSTEXPR(size_t, variant_npos, static_cast<size_t>(-1));
 
 template <class T>
 struct variant_size;