gosu 0.7.10.3 → 0.7.11

data/windows/zlib, libpng/zlib/contrib/minizip/zip.h

@@ -0,0 +1,235 @@
+/* zip.h -- IO for compress .zip files using zlib
+   Version 1.01e, February 12th, 2005
+
+   Copyright (C) 1998-2005 Gilles Vollant
+
+   This unzip package allow creates .ZIP file, compatible with PKZip 2.04g
+     WinZip, InfoZip tools and compatible.
+   Multi volume ZipFile (span) are not supported.
+   Encryption compatible with pkzip 2.04g only supported
+   Old compressions used by old PKZip 1.x are not supported
+
+  For uncompress .zip file, look at unzip.h
+
+
+   I WAIT FEEDBACK at mail info@winimage.com
+   Visit also http://www.winimage.com/zLibDll/unzip.html for evolution
+
+   Condition of use and distribution are the same than zlib :
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+
+
+*/
+
+/* for more info about .ZIP format, see
+      http://www.info-zip.org/pub/infozip/doc/appnote-981119-iz.zip
+      http://www.info-zip.org/pub/infozip/doc/
+   PkWare has also a specification at :
+      ftp://ftp.pkware.com/probdesc.zip
+*/
+
+#ifndef _zip_H
+#define _zip_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifndef _ZLIB_H
+#include "zlib.h"
+#endif
+
+#ifndef _ZLIBIOAPI_H
+#include "ioapi.h"
+#endif
+
+#if defined(STRICTZIP) || defined(STRICTZIPUNZIP)
+/* like the STRICT of WIN32, we define a pointer that cannot be converted
+    from (void*) without cast */
+typedef struct TagzipFile__ { int unused; } zipFile__;
+typedef zipFile__ *zipFile;
+#else
+typedef voidp zipFile;
+#endif
+
+#define ZIP_OK                          (0)
+#define ZIP_EOF                         (0)
+#define ZIP_ERRNO                       (Z_ERRNO)
+#define ZIP_PARAMERROR                  (-102)
+#define ZIP_BADZIPFILE                  (-103)
+#define ZIP_INTERNALERROR               (-104)
+
+#ifndef DEF_MEM_LEVEL
+#  if MAX_MEM_LEVEL >= 8
+#    define DEF_MEM_LEVEL 8
+#  else
+#    define DEF_MEM_LEVEL  MAX_MEM_LEVEL
+#  endif
+#endif
+/* default memLevel */
+
+/* tm_zip contain date/time info */
+typedef struct tm_zip_s
+{
+    uInt tm_sec;            /* seconds after the minute - [0,59] */
+    uInt tm_min;            /* minutes after the hour - [0,59] */
+    uInt tm_hour;           /* hours since midnight - [0,23] */
+    uInt tm_mday;           /* day of the month - [1,31] */
+    uInt tm_mon;            /* months since January - [0,11] */
+    uInt tm_year;           /* years - [1980..2044] */
+} tm_zip;
+
+typedef struct
+{
+    tm_zip      tmz_date;       /* date in understandable format           */
+    uLong       dosDate;       /* if dos_date == 0, tmu_date is used      */
+/*    uLong       flag;        */   /* general purpose bit flag        2 bytes */
+
+    uLong       internal_fa;    /* internal file attributes        2 bytes */
+    uLong       external_fa;    /* external file attributes        4 bytes */
+} zip_fileinfo;
+
+typedef const char* zipcharpc;
+
+
+#define APPEND_STATUS_CREATE        (0)
+#define APPEND_STATUS_CREATEAFTER   (1)
+#define APPEND_STATUS_ADDINZIP      (2)
+
+extern zipFile ZEXPORT zipOpen OF((const char *pathname, int append));
+/*
+  Create a zipfile.
+     pathname contain on Windows XP a filename like "c:\\zlib\\zlib113.zip" or on
+       an Unix computer "zlib/zlib113.zip".
+     if the file pathname exist and append==APPEND_STATUS_CREATEAFTER, the zip
+       will be created at the end of the file.
+         (useful if the file contain a self extractor code)
+     if the file pathname exist and append==APPEND_STATUS_ADDINZIP, we will
+       add files in existing zip (be sure you don't add file that doesn't exist)
+     If the zipfile cannot be opened, the return value is NULL.
+     Else, the return value is a zipFile Handle, usable with other function
+       of this zip package.
+*/
+
+/* Note : there is no delete function into a zipfile.
+   If you want delete file into a zipfile, you must open a zipfile, and create another
+   Of couse, you can use RAW reading and writing to copy the file you did not want delte
+*/
+
+extern zipFile ZEXPORT zipOpen2 OF((const char *pathname,
+                                   int append,
+                                   zipcharpc* globalcomment,
+                                   zlib_filefunc_def* pzlib_filefunc_def));
+
+extern int ZEXPORT zipOpenNewFileInZip OF((zipFile file,
+                       const char* filename,
+                       const zip_fileinfo* zipfi,
+                       const void* extrafield_local,
+                       uInt size_extrafield_local,
+                       const void* extrafield_global,
+                       uInt size_extrafield_global,
+                       const char* comment,
+                       int method,
+                       int level));
+/*
+  Open a file in the ZIP for writing.
+  filename : the filename in zip (if NULL, '-' without quote will be used
+  *zipfi contain supplemental information
+  if extrafield_local!=NULL and size_extrafield_local>0, extrafield_local
+    contains the extrafield data the the local header
+  if extrafield_global!=NULL and size_extrafield_global>0, extrafield_global
+    contains the extrafield data the the local header
+  if comment != NULL, comment contain the comment string
+  method contain the compression method (0 for store, Z_DEFLATED for deflate)
+  level contain the level of compression (can be Z_DEFAULT_COMPRESSION)
+*/
+
+
+extern int ZEXPORT zipOpenNewFileInZip2 OF((zipFile file,
+                                            const char* filename,
+                                            const zip_fileinfo* zipfi,
+                                            const void* extrafield_local,
+                                            uInt size_extrafield_local,
+                                            const void* extrafield_global,
+                                            uInt size_extrafield_global,
+                                            const char* comment,
+                                            int method,
+                                            int level,
+                                            int raw));
+
+/*
+  Same than zipOpenNewFileInZip, except if raw=1, we write raw file
+ */
+
+extern int ZEXPORT zipOpenNewFileInZip3 OF((zipFile file,
+                                            const char* filename,
+                                            const zip_fileinfo* zipfi,
+                                            const void* extrafield_local,
+                                            uInt size_extrafield_local,
+                                            const void* extrafield_global,
+                                            uInt size_extrafield_global,
+                                            const char* comment,
+                                            int method,
+                                            int level,
+                                            int raw,
+                                            int windowBits,
+                                            int memLevel,
+                                            int strategy,
+                                            const char* password,
+                                            uLong crcForCtypting));
+
+/*
+  Same than zipOpenNewFileInZip2, except
+    windowBits,memLevel,,strategy : see parameter strategy in deflateInit2
+    password : crypting password (NULL for no crypting)
+    crcForCtypting : crc of file to compress (needed for crypting)
+ */
+
+
+extern int ZEXPORT zipWriteInFileInZip OF((zipFile file,
+                       const void* buf,
+                       unsigned len));
+/*
+  Write data in the zipfile
+*/
+
+extern int ZEXPORT zipCloseFileInZip OF((zipFile file));
+/*
+  Close the current file in the zipfile
+*/
+
+extern int ZEXPORT zipCloseFileInZipRaw OF((zipFile file,
+                                            uLong uncompressed_size,
+                                            uLong crc32));
+/*
+  Close the current file in the zipfile, for fiel opened with
+    parameter raw=1 in zipOpenNewFileInZip2
+  uncompressed_size and crc32 are value for the uncompressed size
+*/
+
+extern int ZEXPORT zipClose OF((zipFile file,
+                const char* global_comment));
+/*
+  Close the zipfile
+*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _zip_H */

data/windows/zlib, libpng/zlib/contrib/pascal/example.pas

@@ -0,0 +1,599 @@
+(* example.c -- usage example of the zlib compression library
+ * Copyright (C) 1995-2003 Jean-loup Gailly.
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ *
+ * Pascal translation
+ * Copyright (C) 1998 by Jacques Nomssi Nzali.
+ * For conditions of distribution and use, see copyright notice in readme.txt
+ *
+ * Adaptation to the zlibpas interface
+ * Copyright (C) 2003 by Cosmin Truta.
+ * For conditions of distribution and use, see copyright notice in readme.txt
+ *)
+
+program example;
+
+{$DEFINE TEST_COMPRESS}
+{DO NOT $DEFINE TEST_GZIO}
+{$DEFINE TEST_DEFLATE}
+{$DEFINE TEST_INFLATE}
+{$DEFINE TEST_FLUSH}
+{$DEFINE TEST_SYNC}
+{$DEFINE TEST_DICT}
+
+uses SysUtils, zlibpas;
+
+const TESTFILE = 'foo.gz';
+
+(* "hello world" would be more standard, but the repeated "hello"
+ * stresses the compression code better, sorry...
+ *)
+const hello: PChar = 'hello, hello!';
+
+const dictionary: PChar = 'hello';
+
+var dictId: LongInt; (* Adler32 value of the dictionary *)
+
+procedure CHECK_ERR(err: Integer; msg: String);
+begin
+  if err <> Z_OK then
+  begin
+    WriteLn(msg, ' error: ', err);
+    Halt(1);
+  end;
+end;
+
+procedure EXIT_ERR(const msg: String);
+begin
+  WriteLn('Error: ', msg);
+  Halt(1);
+end;
+
+(* ===========================================================================
+ * Test compress and uncompress
+ *)
+{$IFDEF TEST_COMPRESS}
+procedure test_compress(compr: Pointer; comprLen: LongInt;
+                        uncompr: Pointer; uncomprLen: LongInt);
+var err: Integer;
+    len: LongInt;
+begin
+  len := StrLen(hello)+1;
+
+  err := compress(compr, comprLen, hello, len);
+  CHECK_ERR(err, 'compress');
+
+  StrCopy(PChar(uncompr), 'garbage');
+
+  err := uncompress(uncompr, uncomprLen, compr, comprLen);
+  CHECK_ERR(err, 'uncompress');
+
+  if StrComp(PChar(uncompr), hello) <> 0 then
+    EXIT_ERR('bad uncompress')
+  else
+    WriteLn('uncompress(): ', PChar(uncompr));
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test read/write of .gz files
+ *)
+{$IFDEF TEST_GZIO}
+procedure test_gzio(const fname: PChar; (* compressed file name *)
+                    uncompr: Pointer;
+                    uncomprLen: LongInt);
+var err: Integer;
+    len: Integer;
+    zfile: gzFile;
+    pos: LongInt;
+begin
+  len := StrLen(hello)+1;
+
+  zfile := gzopen(fname, 'wb');
+  if zfile = NIL then
+  begin
+    WriteLn('gzopen error');
+    Halt(1);
+  end;
+  gzputc(zfile, 'h');
+  if gzputs(zfile, 'ello') <> 4 then
+  begin
+    WriteLn('gzputs err: ', gzerror(zfile, err));
+    Halt(1);
+  end;
+  {$IFDEF GZ_FORMAT_STRING}
+  if gzprintf(zfile, ', %s!', 'hello') <> 8 then
+  begin
+    WriteLn('gzprintf err: ', gzerror(zfile, err));
+    Halt(1);
+  end;
+  {$ELSE}
+  if gzputs(zfile, ', hello!') <> 8 then
+  begin
+    WriteLn('gzputs err: ', gzerror(zfile, err));
+    Halt(1);
+  end;
+  {$ENDIF}
+  gzseek(zfile, 1, SEEK_CUR); (* add one zero byte *)
+  gzclose(zfile);
+
+  zfile := gzopen(fname, 'rb');
+  if zfile = NIL then
+  begin
+    WriteLn('gzopen error');
+    Halt(1);
+  end;
+
+  StrCopy(PChar(uncompr), 'garbage');
+
+  if gzread(zfile, uncompr, uncomprLen) <> len then
+  begin
+    WriteLn('gzread err: ', gzerror(zfile, err));
+    Halt(1);
+  end;
+  if StrComp(PChar(uncompr), hello) <> 0 then
+  begin
+    WriteLn('bad gzread: ', PChar(uncompr));
+    Halt(1);
+  end
+  else
+    WriteLn('gzread(): ', PChar(uncompr));
+
+  pos := gzseek(zfile, -8, SEEK_CUR);
+  if (pos <> 6) or (gztell(zfile) <> pos) then
+  begin
+    WriteLn('gzseek error, pos=', pos, ', gztell=', gztell(zfile));
+    Halt(1);
+  end;
+
+  if gzgetc(zfile) <> ' ' then
+  begin
+    WriteLn('gzgetc error');
+    Halt(1);
+  end;
+
+  if gzungetc(' ', zfile) <> ' ' then
+  begin
+    WriteLn('gzungetc error');
+    Halt(1);
+  end;
+
+  gzgets(zfile, PChar(uncompr), uncomprLen);
+  uncomprLen := StrLen(PChar(uncompr));
+  if uncomprLen <> 7 then (* " hello!" *)
+  begin
+    WriteLn('gzgets err after gzseek: ', gzerror(zfile, err));
+    Halt(1);
+  end;
+  if StrComp(PChar(uncompr), hello + 6) <> 0 then
+  begin
+    WriteLn('bad gzgets after gzseek');
+    Halt(1);
+  end
+  else
+    WriteLn('gzgets() after gzseek: ', PChar(uncompr));
+
+  gzclose(zfile);
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test deflate with small buffers
+ *)
+{$IFDEF TEST_DEFLATE}
+procedure test_deflate(compr: Pointer; comprLen: LongInt);
+var c_stream: z_stream; (* compression stream *)
+    err: Integer;
+    len: LongInt;
+begin
+  len := StrLen(hello)+1;
+
+  c_stream.zalloc := NIL;
+  c_stream.zfree := NIL;
+  c_stream.opaque := NIL;
+
+  err := deflateInit(c_stream, Z_DEFAULT_COMPRESSION);
+  CHECK_ERR(err, 'deflateInit');
+
+  c_stream.next_in := hello;
+  c_stream.next_out := compr;
+
+  while (c_stream.total_in <> len) and
+        (c_stream.total_out < comprLen) do
+  begin
+    c_stream.avail_out := 1; { force small buffers }
+    c_stream.avail_in := 1;
+    err := deflate(c_stream, Z_NO_FLUSH);
+    CHECK_ERR(err, 'deflate');
+  end;
+
+  (* Finish the stream, still forcing small buffers: *)
+  while TRUE do
+  begin
+    c_stream.avail_out := 1;
+    err := deflate(c_stream, Z_FINISH);
+    if err = Z_STREAM_END then
+      break;
+    CHECK_ERR(err, 'deflate');
+  end;
+
+  err := deflateEnd(c_stream);
+  CHECK_ERR(err, 'deflateEnd');
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test inflate with small buffers
+ *)
+{$IFDEF TEST_INFLATE}
+procedure test_inflate(compr: Pointer; comprLen : LongInt;
+                       uncompr: Pointer; uncomprLen : LongInt);
+var err: Integer;
+    d_stream: z_stream; (* decompression stream *)
+begin
+  StrCopy(PChar(uncompr), 'garbage');
+
+  d_stream.zalloc := NIL;
+  d_stream.zfree := NIL;
+  d_stream.opaque := NIL;
+
+  d_stream.next_in := compr;
+  d_stream.avail_in := 0;
+  d_stream.next_out := uncompr;
+
+  err := inflateInit(d_stream);
+  CHECK_ERR(err, 'inflateInit');
+
+  while (d_stream.total_out < uncomprLen) and
+        (d_stream.total_in < comprLen) do
+  begin
+    d_stream.avail_out := 1; (* force small buffers *)
+    d_stream.avail_in := 1;
+    err := inflate(d_stream, Z_NO_FLUSH);
+    if err = Z_STREAM_END then
+      break;
+    CHECK_ERR(err, 'inflate');
+  end;
+
+  err := inflateEnd(d_stream);
+  CHECK_ERR(err, 'inflateEnd');
+
+  if StrComp(PChar(uncompr), hello) <> 0 then
+    EXIT_ERR('bad inflate')
+  else
+    WriteLn('inflate(): ', PChar(uncompr));
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test deflate with large buffers and dynamic change of compression level
+ *)
+{$IFDEF TEST_DEFLATE}
+procedure test_large_deflate(compr: Pointer; comprLen: LongInt;
+                             uncompr: Pointer; uncomprLen: LongInt);
+var c_stream: z_stream; (* compression stream *)
+    err: Integer;
+begin
+  c_stream.zalloc := NIL;
+  c_stream.zfree := NIL;
+  c_stream.opaque := NIL;
+
+  err := deflateInit(c_stream, Z_BEST_SPEED);
+  CHECK_ERR(err, 'deflateInit');
+
+  c_stream.next_out := compr;
+  c_stream.avail_out := Integer(comprLen);
+
+  (* At this point, uncompr is still mostly zeroes, so it should compress
+   * very well:
+   *)
+  c_stream.next_in := uncompr;
+  c_stream.avail_in := Integer(uncomprLen);
+  err := deflate(c_stream, Z_NO_FLUSH);
+  CHECK_ERR(err, 'deflate');
+  if c_stream.avail_in <> 0 then
+    EXIT_ERR('deflate not greedy');
+
+  (* Feed in already compressed data and switch to no compression: *)
+  deflateParams(c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
+  c_stream.next_in := compr;
+  c_stream.avail_in := Integer(comprLen div 2);
+  err := deflate(c_stream, Z_NO_FLUSH);
+  CHECK_ERR(err, 'deflate');
+
+  (* Switch back to compressing mode: *)
+  deflateParams(c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
+  c_stream.next_in := uncompr;
+  c_stream.avail_in := Integer(uncomprLen);
+  err := deflate(c_stream, Z_NO_FLUSH);
+  CHECK_ERR(err, 'deflate');
+
+  err := deflate(c_stream, Z_FINISH);
+  if err <> Z_STREAM_END then
+    EXIT_ERR('deflate should report Z_STREAM_END');
+
+  err := deflateEnd(c_stream);
+  CHECK_ERR(err, 'deflateEnd');
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test inflate with large buffers
+ *)
+{$IFDEF TEST_INFLATE}
+procedure test_large_inflate(compr: Pointer; comprLen: LongInt;
+                             uncompr: Pointer; uncomprLen: LongInt);
+var err: Integer;
+    d_stream: z_stream; (* decompression stream *)
+begin
+  StrCopy(PChar(uncompr), 'garbage');
+
+  d_stream.zalloc := NIL;
+  d_stream.zfree := NIL;
+  d_stream.opaque := NIL;
+
+  d_stream.next_in := compr;
+  d_stream.avail_in := Integer(comprLen);
+
+  err := inflateInit(d_stream);
+  CHECK_ERR(err, 'inflateInit');
+
+  while TRUE do
+  begin
+    d_stream.next_out := uncompr;            (* discard the output *)
+    d_stream.avail_out := Integer(uncomprLen);
+    err := inflate(d_stream, Z_NO_FLUSH);
+    if err = Z_STREAM_END then
+      break;
+    CHECK_ERR(err, 'large inflate');
+  end;
+
+  err := inflateEnd(d_stream);
+  CHECK_ERR(err, 'inflateEnd');
+
+  if d_stream.total_out <> 2 * uncomprLen + comprLen div 2 then
+  begin
+    WriteLn('bad large inflate: ', d_stream.total_out);
+    Halt(1);
+  end
+  else
+    WriteLn('large_inflate(): OK');
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test deflate with full flush
+ *)
+{$IFDEF TEST_FLUSH}
+procedure test_flush(compr: Pointer; var comprLen : LongInt);
+var c_stream: z_stream; (* compression stream *)
+    err: Integer;
+    len: Integer;
+begin
+  len := StrLen(hello)+1;
+
+  c_stream.zalloc := NIL;
+  c_stream.zfree := NIL;
+  c_stream.opaque := NIL;
+
+  err := deflateInit(c_stream, Z_DEFAULT_COMPRESSION);
+  CHECK_ERR(err, 'deflateInit');
+
+  c_stream.next_in := hello;
+  c_stream.next_out := compr;
+  c_stream.avail_in := 3;
+  c_stream.avail_out := Integer(comprLen);
+  err := deflate(c_stream, Z_FULL_FLUSH);
+  CHECK_ERR(err, 'deflate');
+
+  Inc(PByteArray(compr)^[3]); (* force an error in first compressed block *)
+  c_stream.avail_in := len - 3;
+
+  err := deflate(c_stream, Z_FINISH);
+  if err <> Z_STREAM_END then
+    CHECK_ERR(err, 'deflate');
+
+  err := deflateEnd(c_stream);
+  CHECK_ERR(err, 'deflateEnd');
+
+  comprLen := c_stream.total_out;
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test inflateSync()
+ *)
+{$IFDEF TEST_SYNC}
+procedure test_sync(compr: Pointer; comprLen: LongInt;
+                    uncompr: Pointer; uncomprLen : LongInt);
+var err: Integer;
+    d_stream: z_stream; (* decompression stream *)
+begin
+  StrCopy(PChar(uncompr), 'garbage');
+
+  d_stream.zalloc := NIL;
+  d_stream.zfree := NIL;
+  d_stream.opaque := NIL;
+
+  d_stream.next_in := compr;
+  d_stream.avail_in := 2; (* just read the zlib header *)
+
+  err := inflateInit(d_stream);
+  CHECK_ERR(err, 'inflateInit');
+
+  d_stream.next_out := uncompr;
+  d_stream.avail_out := Integer(uncomprLen);
+
+  inflate(d_stream, Z_NO_FLUSH);
+  CHECK_ERR(err, 'inflate');
+
+  d_stream.avail_in := Integer(comprLen-2);   (* read all compressed data *)
+  err := inflateSync(d_stream);               (* but skip the damaged part *)
+  CHECK_ERR(err, 'inflateSync');
+
+  err := inflate(d_stream, Z_FINISH);
+  if err <> Z_DATA_ERROR then
+    EXIT_ERR('inflate should report DATA_ERROR');
+    (* Because of incorrect adler32 *)
+
+  err := inflateEnd(d_stream);
+  CHECK_ERR(err, 'inflateEnd');
+
+  WriteLn('after inflateSync(): hel', PChar(uncompr));
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test deflate with preset dictionary
+ *)
+{$IFDEF TEST_DICT}
+procedure test_dict_deflate(compr: Pointer; comprLen: LongInt);
+var c_stream: z_stream; (* compression stream *)
+    err: Integer;
+begin
+  c_stream.zalloc := NIL;
+  c_stream.zfree := NIL;
+  c_stream.opaque := NIL;
+
+  err := deflateInit(c_stream, Z_BEST_COMPRESSION);
+  CHECK_ERR(err, 'deflateInit');
+
+  err := deflateSetDictionary(c_stream, dictionary, StrLen(dictionary));
+  CHECK_ERR(err, 'deflateSetDictionary');
+
+  dictId := c_stream.adler;
+  c_stream.next_out := compr;
+  c_stream.avail_out := Integer(comprLen);
+
+  c_stream.next_in := hello;
+  c_stream.avail_in := StrLen(hello)+1;
+
+  err := deflate(c_stream, Z_FINISH);
+  if err <> Z_STREAM_END then
+    EXIT_ERR('deflate should report Z_STREAM_END');
+
+  err := deflateEnd(c_stream);
+  CHECK_ERR(err, 'deflateEnd');
+end;
+{$ENDIF}
+
+(* ===========================================================================
+ * Test inflate with a preset dictionary
+ *)
+{$IFDEF TEST_DICT}
+procedure test_dict_inflate(compr: Pointer; comprLen: LongInt;
+                            uncompr: Pointer; uncomprLen: LongInt);
+var err: Integer;
+    d_stream: z_stream; (* decompression stream *)
+begin
+  StrCopy(PChar(uncompr), 'garbage');
+
+  d_stream.zalloc := NIL;
+  d_stream.zfree := NIL;
+  d_stream.opaque := NIL;
+
+  d_stream.next_in := compr;
+  d_stream.avail_in := Integer(comprLen);
+
+  err := inflateInit(d_stream);
+  CHECK_ERR(err, 'inflateInit');
+
+  d_stream.next_out := uncompr;
+  d_stream.avail_out := Integer(uncomprLen);
+
+  while TRUE do
+  begin
+    err := inflate(d_stream, Z_NO_FLUSH);
+    if err = Z_STREAM_END then
+      break;
+    if err = Z_NEED_DICT then
+    begin
+      if d_stream.adler <> dictId then
+        EXIT_ERR('unexpected dictionary');
+      err := inflateSetDictionary(d_stream, dictionary, StrLen(dictionary));
+    end;
+    CHECK_ERR(err, 'inflate with dict');
+  end;
+
+  err := inflateEnd(d_stream);
+  CHECK_ERR(err, 'inflateEnd');
+
+  if StrComp(PChar(uncompr), hello) <> 0 then
+    EXIT_ERR('bad inflate with dict')
+  else
+    WriteLn('inflate with dictionary: ', PChar(uncompr));
+end;
+{$ENDIF}
+
+var compr, uncompr: Pointer;
+    comprLen, uncomprLen: LongInt;
+
+begin
+  if zlibVersion^ <> ZLIB_VERSION[1] then
+    EXIT_ERR('Incompatible zlib version');
+
+  WriteLn('zlib version: ', zlibVersion);
+  WriteLn('zlib compile flags: ', Format('0x%x', [zlibCompileFlags]));
+
+  comprLen := 10000 * SizeOf(Integer); (* don't overflow on MSDOS *)
+  uncomprLen := comprLen;
+  GetMem(compr, comprLen);
+  GetMem(uncompr, uncomprLen);
+  if (compr = NIL) or (uncompr = NIL) then
+    EXIT_ERR('Out of memory');
+  (* compr and uncompr are cleared to avoid reading uninitialized
+   * data and to ensure that uncompr compresses well.
+   *)
+  FillChar(compr^, comprLen, 0);
+  FillChar(uncompr^, uncomprLen, 0);
+
+  {$IFDEF TEST_COMPRESS}
+  WriteLn('** Testing compress');
+  test_compress(compr, comprLen, uncompr, uncomprLen);
+  {$ENDIF}
+
+  {$IFDEF TEST_GZIO}
+  WriteLn('** Testing gzio');
+  if ParamCount >= 1 then
+    test_gzio(ParamStr(1), uncompr, uncomprLen)
+  else
+    test_gzio(TESTFILE, uncompr, uncomprLen);
+  {$ENDIF}
+
+  {$IFDEF TEST_DEFLATE}
+  WriteLn('** Testing deflate with small buffers');
+  test_deflate(compr, comprLen);
+  {$ENDIF}
+  {$IFDEF TEST_INFLATE}
+  WriteLn('** Testing inflate with small buffers');
+  test_inflate(compr, comprLen, uncompr, uncomprLen);
+  {$ENDIF}
+
+  {$IFDEF TEST_DEFLATE}
+  WriteLn('** Testing deflate with large buffers');
+  test_large_deflate(compr, comprLen, uncompr, uncomprLen);
+  {$ENDIF}
+  {$IFDEF TEST_INFLATE}
+  WriteLn('** Testing inflate with large buffers');
+  test_large_inflate(compr, comprLen, uncompr, uncomprLen);
+  {$ENDIF}
+
+  {$IFDEF TEST_FLUSH}
+  WriteLn('** Testing deflate with full flush');
+  test_flush(compr, comprLen);
+  {$ENDIF}
+  {$IFDEF TEST_SYNC}
+  WriteLn('** Testing inflateSync');
+  test_sync(compr, comprLen, uncompr, uncomprLen);
+  {$ENDIF}
+  comprLen := uncomprLen;
+
+  {$IFDEF TEST_DICT}
+  WriteLn('** Testing deflate and inflate with preset dictionary');
+  test_dict_deflate(compr, comprLen);
+  test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
+  {$ENDIF}
+
+  FreeMem(compr, comprLen);
+  FreeMem(uncompr, uncomprLen);
+end.