gosu 0.15.0 → 1.0.0

data/dependencies/SDL/include/SDL_endian.h

@@ -0,0 +1,263 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL_endian.h
+ *
+ *  Functions for reading and writing endian-specific values
+ */
+
+#ifndef SDL_endian_h_
+#define SDL_endian_h_
+
+#include "SDL_stdinc.h"
+
+/**
+ *  \name The two types of endianness
+ */
+/* @{ */
+#define SDL_LIL_ENDIAN  1234
+#define SDL_BIG_ENDIAN  4321
+/* @} */
+
+#ifndef SDL_BYTEORDER           /* Not defined in SDL_config.h? */
+#ifdef __linux__
+#include <endian.h>
+#define SDL_BYTEORDER  __BYTE_ORDER
+#elif defined(__OpenBSD__)
+#include <endian.h>
+#define SDL_BYTEORDER  BYTE_ORDER
+#else
+#if defined(__hppa__) || \
+    defined(__m68k__) || defined(mc68000) || defined(_M_M68K) || \
+    (defined(__MIPS__) && defined(__MIPSEB__)) || \
+    defined(__ppc__) || defined(__POWERPC__) || defined(_M_PPC) || \
+    defined(__sparc__)
+#define SDL_BYTEORDER   SDL_BIG_ENDIAN
+#else
+#define SDL_BYTEORDER   SDL_LIL_ENDIAN
+#endif
+#endif /* __linux__ */
+#endif /* !SDL_BYTEORDER */
+
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ *  \file SDL_endian.h
+ */
+#if defined(__GNUC__) && defined(__i386__) && \
+   !(__GNUC__ == 2 && __GNUC_MINOR__ == 95 /* broken gcc version */)
+SDL_FORCE_INLINE Uint16
+SDL_Swap16(Uint16 x)
+{
+  __asm__("xchgb %b0,%h0": "=q"(x):"0"(x));
+    return x;
+}
+#elif defined(__GNUC__) && defined(__x86_64__)
+SDL_FORCE_INLINE Uint16
+SDL_Swap16(Uint16 x)
+{
+  __asm__("xchgb %b0,%h0": "=Q"(x):"0"(x));
+    return x;
+}
+#elif defined(__GNUC__) && (defined(__powerpc__) || defined(__ppc__))
+SDL_FORCE_INLINE Uint16
+SDL_Swap16(Uint16 x)
+{
+    int result;
+
+  __asm__("rlwimi %0,%2,8,16,23": "=&r"(result):"0"(x >> 8), "r"(x));
+    return (Uint16)result;
+}
+#elif defined(__GNUC__) && (defined(__M68000__) || defined(__M68020__)) && !defined(__mcoldfire__)
+SDL_FORCE_INLINE Uint16
+SDL_Swap16(Uint16 x)
+{
+  __asm__("rorw #8,%0": "=d"(x): "0"(x):"cc");
+    return x;
+}
+#elif defined(__WATCOMC__) && defined(__386__)
+extern _inline Uint16 SDL_Swap16(Uint16);
+#pragma aux SDL_Swap16 = \
+  "xchg al, ah" \
+  parm   [ax]   \
+  modify [ax];
+#else
+SDL_FORCE_INLINE Uint16
+SDL_Swap16(Uint16 x)
+{
+    return SDL_static_cast(Uint16, ((x << 8) | (x >> 8)));
+}
+#endif
+
+#if defined(__GNUC__) && defined(__i386__)
+SDL_FORCE_INLINE Uint32
+SDL_Swap32(Uint32 x)
+{
+  __asm__("bswap %0": "=r"(x):"0"(x));
+    return x;
+}
+#elif defined(__GNUC__) && defined(__x86_64__)
+SDL_FORCE_INLINE Uint32
+SDL_Swap32(Uint32 x)
+{
+  __asm__("bswapl %0": "=r"(x):"0"(x));
+    return x;
+}
+#elif defined(__GNUC__) && (defined(__powerpc__) || defined(__ppc__))
+SDL_FORCE_INLINE Uint32
+SDL_Swap32(Uint32 x)
+{
+    Uint32 result;
+
+  __asm__("rlwimi %0,%2,24,16,23": "=&r"(result):"0"(x >> 24), "r"(x));
+  __asm__("rlwimi %0,%2,8,8,15": "=&r"(result):"0"(result), "r"(x));
+  __asm__("rlwimi %0,%2,24,0,7": "=&r"(result):"0"(result), "r"(x));
+    return result;
+}
+#elif defined(__GNUC__) && (defined(__M68000__) || defined(__M68020__)) && !defined(__mcoldfire__)
+SDL_FORCE_INLINE Uint32
+SDL_Swap32(Uint32 x)
+{
+  __asm__("rorw #8,%0\n\tswap %0\n\trorw #8,%0": "=d"(x): "0"(x):"cc");
+    return x;
+}
+#elif defined(__WATCOMC__) && defined(__386__)
+extern _inline Uint32 SDL_Swap32(Uint32);
+#ifndef __SW_3 /* 486+ */
+#pragma aux SDL_Swap32 = \
+  "bswap eax"  \
+  parm   [eax] \
+  modify [eax];
+#else  /* 386-only */
+#pragma aux SDL_Swap32 = \
+  "xchg al, ah"  \
+  "ror  eax, 16" \
+  "xchg al, ah"  \
+  parm   [eax]   \
+  modify [eax];
+#endif
+#else
+SDL_FORCE_INLINE Uint32
+SDL_Swap32(Uint32 x)
+{
+    return SDL_static_cast(Uint32, ((x << 24) | ((x << 8) & 0x00FF0000) |
+                                    ((x >> 8) & 0x0000FF00) | (x >> 24)));
+}
+#endif
+
+#if defined(__GNUC__) && defined(__i386__)
+SDL_FORCE_INLINE Uint64
+SDL_Swap64(Uint64 x)
+{
+    union
+    {
+        struct
+        {
+            Uint32 a, b;
+        } s;
+        Uint64 u;
+    } v;
+    v.u = x;
+  __asm__("bswapl %0 ; bswapl %1 ; xchgl %0,%1": "=r"(v.s.a), "=r"(v.s.b):"0"(v.s.a),
+            "1"(v.s.
+                b));
+    return v.u;
+}
+#elif defined(__GNUC__) && defined(__x86_64__)
+SDL_FORCE_INLINE Uint64
+SDL_Swap64(Uint64 x)
+{
+  __asm__("bswapq %0": "=r"(x):"0"(x));
+    return x;
+}
+#else
+SDL_FORCE_INLINE Uint64
+SDL_Swap64(Uint64 x)
+{
+    Uint32 hi, lo;
+
+    /* Separate into high and low 32-bit values and swap them */
+    lo = SDL_static_cast(Uint32, x & 0xFFFFFFFF);
+    x >>= 32;
+    hi = SDL_static_cast(Uint32, x & 0xFFFFFFFF);
+    x = SDL_Swap32(lo);
+    x <<= 32;
+    x |= SDL_Swap32(hi);
+    return (x);
+}
+#endif
+
+
+SDL_FORCE_INLINE float
+SDL_SwapFloat(float x)
+{
+    union
+    {
+        float f;
+        Uint32 ui32;
+    } swapper;
+    swapper.f = x;
+    swapper.ui32 = SDL_Swap32(swapper.ui32);
+    return swapper.f;
+}
+
+
+/**
+ *  \name Swap to native
+ *  Byteswap item from the specified endianness to the native endianness.
+ */
+/* @{ */
+#if SDL_BYTEORDER == SDL_LIL_ENDIAN
+#define SDL_SwapLE16(X) (X)
+#define SDL_SwapLE32(X) (X)
+#define SDL_SwapLE64(X) (X)
+#define SDL_SwapFloatLE(X)  (X)
+#define SDL_SwapBE16(X) SDL_Swap16(X)
+#define SDL_SwapBE32(X) SDL_Swap32(X)
+#define SDL_SwapBE64(X) SDL_Swap64(X)
+#define SDL_SwapFloatBE(X)  SDL_SwapFloat(X)
+#else
+#define SDL_SwapLE16(X) SDL_Swap16(X)
+#define SDL_SwapLE32(X) SDL_Swap32(X)
+#define SDL_SwapLE64(X) SDL_Swap64(X)
+#define SDL_SwapFloatLE(X)  SDL_SwapFloat(X)
+#define SDL_SwapBE16(X) (X)
+#define SDL_SwapBE32(X) (X)
+#define SDL_SwapBE64(X) (X)
+#define SDL_SwapFloatBE(X)  (X)
+#endif
+/* @} *//* Swap to native */
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_endian_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */

data/dependencies/SDL/include/SDL_error.h

@@ -0,0 +1,112 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL_error.h
+ *
+ *  Simple error message routines for SDL.
+ */
+
+#ifndef SDL_error_h_
+#define SDL_error_h_
+
+#include "SDL_stdinc.h"
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Public functions */
+
+
+/**
+ *  \brief Set the error message for the current thread
+ *
+ *  \return -1, there is no error handling for this function
+ */
+extern DECLSPEC int SDLCALL SDL_SetError(SDL_PRINTF_FORMAT_STRING const char *fmt, ...) SDL_PRINTF_VARARG_FUNC(1);
+
+/**
+ *  \brief Get the last error message that was set
+ *
+ * SDL API functions may set error messages and then succeed, so you should
+ * only use the error value if a function fails.
+ * 
+ * This returns a pointer to a static buffer for convenience and should not
+ * be called by multiple threads simultaneously.
+ *
+ *  \return a pointer to the last error message that was set
+ */
+extern DECLSPEC const char *SDLCALL SDL_GetError(void);
+
+/**
+ *  \brief Get the last error message that was set for the current thread
+ *
+ * SDL API functions may set error messages and then succeed, so you should
+ * only use the error value if a function fails.
+ * 
+ *  \param errstr A buffer to fill with the last error message that was set
+ *                for the current thread
+ *  \param maxlen The size of the buffer pointed to by the errstr parameter
+ *
+ *  \return errstr
+ */
+extern DECLSPEC char * SDLCALL SDL_GetErrorMsg(char *errstr, int maxlen);
+
+/**
+ *  \brief Clear the error message for the current thread
+ */
+extern DECLSPEC void SDLCALL SDL_ClearError(void);
+
+/**
+ *  \name Internal error functions
+ *
+ *  \internal
+ *  Private error reporting function - used internally.
+ */
+/* @{ */
+#define SDL_OutOfMemory()   SDL_Error(SDL_ENOMEM)
+#define SDL_Unsupported()   SDL_Error(SDL_UNSUPPORTED)
+#define SDL_InvalidParamError(param)    SDL_SetError("Parameter '%s' is invalid", (param))
+typedef enum
+{
+    SDL_ENOMEM,
+    SDL_EFREAD,
+    SDL_EFWRITE,
+    SDL_EFSEEK,
+    SDL_UNSUPPORTED,
+    SDL_LASTERROR
+} SDL_errorcode;
+/* SDL_Error() unconditionally returns -1. */
+extern DECLSPEC int SDLCALL SDL_Error(SDL_errorcode code);
+/* @} *//* Internal error functions */
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_error_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */

data/dependencies/SDL/include/SDL_events.h

@@ -0,0 +1,827 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2020 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+/**
+ *  \file SDL_events.h
+ *
+ *  Include file for SDL event handling.
+ */
+
+#ifndef SDL_events_h_
+#define SDL_events_h_
+
+#include "SDL_stdinc.h"
+#include "SDL_error.h"
+#include "SDL_video.h"
+#include "SDL_keyboard.h"
+#include "SDL_mouse.h"
+#include "SDL_joystick.h"
+#include "SDL_gamecontroller.h"
+#include "SDL_quit.h"
+#include "SDL_gesture.h"
+#include "SDL_touch.h"
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* General keyboard/mouse state definitions */
+#define SDL_RELEASED    0
+#define SDL_PRESSED 1
+
+/**
+ * \brief The types of events that can be delivered.
+ */
+typedef enum
+{
+    SDL_FIRSTEVENT     = 0,     /**< Unused (do not remove) */
+
+    /* Application events */
+    SDL_QUIT           = 0x100, /**< User-requested quit */
+
+    /* These application events have special meaning on iOS, see README-ios.md for details */
+    SDL_APP_TERMINATING,        /**< The application is being terminated by the OS
+                                     Called on iOS in applicationWillTerminate()
+                                     Called on Android in onDestroy()
+                                */
+    SDL_APP_LOWMEMORY,          /**< The application is low on memory, free memory if possible.
+                                     Called on iOS in applicationDidReceiveMemoryWarning()
+                                     Called on Android in onLowMemory()
+                                */
+    SDL_APP_WILLENTERBACKGROUND, /**< The application is about to enter the background
+                                     Called on iOS in applicationWillResignActive()
+                                     Called on Android in onPause()
+                                */
+    SDL_APP_DIDENTERBACKGROUND, /**< The application did enter the background and may not get CPU for some time
+                                     Called on iOS in applicationDidEnterBackground()
+                                     Called on Android in onPause()
+                                */
+    SDL_APP_WILLENTERFOREGROUND, /**< The application is about to enter the foreground
+                                     Called on iOS in applicationWillEnterForeground()
+                                     Called on Android in onResume()
+                                */
+    SDL_APP_DIDENTERFOREGROUND, /**< The application is now interactive
+                                     Called on iOS in applicationDidBecomeActive()
+                                     Called on Android in onResume()
+                                */
+
+    SDL_LOCALECHANGED,  /**< The user's locale preferences have changed. */
+
+    /* Display events */
+    SDL_DISPLAYEVENT   = 0x150,  /**< Display state change */
+
+    /* Window events */
+    SDL_WINDOWEVENT    = 0x200, /**< Window state change */
+    SDL_SYSWMEVENT,             /**< System specific event */
+
+    /* Keyboard events */
+    SDL_KEYDOWN        = 0x300, /**< Key pressed */
+    SDL_KEYUP,                  /**< Key released */
+    SDL_TEXTEDITING,            /**< Keyboard text editing (composition) */
+    SDL_TEXTINPUT,              /**< Keyboard text input */
+    SDL_KEYMAPCHANGED,          /**< Keymap changed due to a system event such as an
+                                     input language or keyboard layout change.
+                                */
+
+    /* Mouse events */
+    SDL_MOUSEMOTION    = 0x400, /**< Mouse moved */
+    SDL_MOUSEBUTTONDOWN,        /**< Mouse button pressed */
+    SDL_MOUSEBUTTONUP,          /**< Mouse button released */
+    SDL_MOUSEWHEEL,             /**< Mouse wheel motion */
+
+    /* Joystick events */
+    SDL_JOYAXISMOTION  = 0x600, /**< Joystick axis motion */
+    SDL_JOYBALLMOTION,          /**< Joystick trackball motion */
+    SDL_JOYHATMOTION,           /**< Joystick hat position change */
+    SDL_JOYBUTTONDOWN,          /**< Joystick button pressed */
+    SDL_JOYBUTTONUP,            /**< Joystick button released */
+    SDL_JOYDEVICEADDED,         /**< A new joystick has been inserted into the system */
+    SDL_JOYDEVICEREMOVED,       /**< An opened joystick has been removed */
+
+    /* Game controller events */
+    SDL_CONTROLLERAXISMOTION  = 0x650, /**< Game controller axis motion */
+    SDL_CONTROLLERBUTTONDOWN,          /**< Game controller button pressed */
+    SDL_CONTROLLERBUTTONUP,            /**< Game controller button released */
+    SDL_CONTROLLERDEVICEADDED,         /**< A new Game controller has been inserted into the system */
+    SDL_CONTROLLERDEVICEREMOVED,       /**< An opened Game controller has been removed */
+    SDL_CONTROLLERDEVICEREMAPPED,      /**< The controller mapping was updated */
+    SDL_CONTROLLERTOUCHPADDOWN,        /**< Game controller touchpad was touched */
+    SDL_CONTROLLERTOUCHPADMOTION,      /**< Game controller touchpad finger was moved */
+    SDL_CONTROLLERTOUCHPADUP,          /**< Game controller touchpad finger was lifted */
+    SDL_CONTROLLERSENSORUPDATE,        /**< Game controller sensor was updated */
+
+    /* Touch events */
+    SDL_FINGERDOWN      = 0x700,
+    SDL_FINGERUP,
+    SDL_FINGERMOTION,
+
+    /* Gesture events */
+    SDL_DOLLARGESTURE   = 0x800,
+    SDL_DOLLARRECORD,
+    SDL_MULTIGESTURE,
+
+    /* Clipboard events */
+    SDL_CLIPBOARDUPDATE = 0x900, /**< The clipboard changed */
+
+    /* Drag and drop events */
+    SDL_DROPFILE        = 0x1000, /**< The system requests a file open */
+    SDL_DROPTEXT,                 /**< text/plain drag-and-drop event */
+    SDL_DROPBEGIN,                /**< A new set of drops is beginning (NULL filename) */
+    SDL_DROPCOMPLETE,             /**< Current set of drops is now complete (NULL filename) */
+
+    /* Audio hotplug events */
+    SDL_AUDIODEVICEADDED = 0x1100, /**< A new audio device is available */
+    SDL_AUDIODEVICEREMOVED,        /**< An audio device has been removed. */
+
+    /* Sensor events */
+    SDL_SENSORUPDATE = 0x1200,     /**< A sensor was updated */
+
+    /* Render events */
+    SDL_RENDER_TARGETS_RESET = 0x2000, /**< The render targets have been reset and their contents need to be updated */
+    SDL_RENDER_DEVICE_RESET, /**< The device has been reset and all textures need to be recreated */
+
+    /** Events ::SDL_USEREVENT through ::SDL_LASTEVENT are for your use,
+     *  and should be allocated with SDL_RegisterEvents()
+     */
+    SDL_USEREVENT    = 0x8000,
+
+    /**
+     *  This last event is only for bounding internal arrays
+     */
+    SDL_LASTEVENT    = 0xFFFF
+} SDL_EventType;
+
+/**
+ *  \brief Fields shared by every event
+ */
+typedef struct SDL_CommonEvent
+{
+    Uint32 type;
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+} SDL_CommonEvent;
+
+/**
+ *  \brief Display state change event data (event.display.*)
+ */
+typedef struct SDL_DisplayEvent
+{
+    Uint32 type;        /**< ::SDL_DISPLAYEVENT */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    Uint32 display;     /**< The associated display index */
+    Uint8 event;        /**< ::SDL_DisplayEventID */
+    Uint8 padding1;
+    Uint8 padding2;
+    Uint8 padding3;
+    Sint32 data1;       /**< event dependent data */
+} SDL_DisplayEvent;
+
+/**
+ *  \brief Window state change event data (event.window.*)
+ */
+typedef struct SDL_WindowEvent
+{
+    Uint32 type;        /**< ::SDL_WINDOWEVENT */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    Uint32 windowID;    /**< The associated window */
+    Uint8 event;        /**< ::SDL_WindowEventID */
+    Uint8 padding1;
+    Uint8 padding2;
+    Uint8 padding3;
+    Sint32 data1;       /**< event dependent data */
+    Sint32 data2;       /**< event dependent data */
+} SDL_WindowEvent;
+
+/**
+ *  \brief Keyboard button event structure (event.key.*)
+ */
+typedef struct SDL_KeyboardEvent
+{
+    Uint32 type;        /**< ::SDL_KEYDOWN or ::SDL_KEYUP */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    Uint32 windowID;    /**< The window with keyboard focus, if any */
+    Uint8 state;        /**< ::SDL_PRESSED or ::SDL_RELEASED */
+    Uint8 repeat;       /**< Non-zero if this is a key repeat */
+    Uint8 padding2;
+    Uint8 padding3;
+    SDL_Keysym keysym;  /**< The key that was pressed or released */
+} SDL_KeyboardEvent;
+
+#define SDL_TEXTEDITINGEVENT_TEXT_SIZE (32)
+/**
+ *  \brief Keyboard text editing event structure (event.edit.*)
+ */
+typedef struct SDL_TextEditingEvent
+{
+    Uint32 type;                                /**< ::SDL_TEXTEDITING */
+    Uint32 timestamp;                           /**< In milliseconds, populated using SDL_GetTicks() */
+    Uint32 windowID;                            /**< The window with keyboard focus, if any */
+    char text[SDL_TEXTEDITINGEVENT_TEXT_SIZE];  /**< The editing text */
+    Sint32 start;                               /**< The start cursor of selected editing text */
+    Sint32 length;                              /**< The length of selected editing text */
+} SDL_TextEditingEvent;
+
+
+#define SDL_TEXTINPUTEVENT_TEXT_SIZE (32)
+/**
+ *  \brief Keyboard text input event structure (event.text.*)
+ */
+typedef struct SDL_TextInputEvent
+{
+    Uint32 type;                              /**< ::SDL_TEXTINPUT */
+    Uint32 timestamp;                         /**< In milliseconds, populated using SDL_GetTicks() */
+    Uint32 windowID;                          /**< The window with keyboard focus, if any */
+    char text[SDL_TEXTINPUTEVENT_TEXT_SIZE];  /**< The input text */
+} SDL_TextInputEvent;
+
+/**
+ *  \brief Mouse motion event structure (event.motion.*)
+ */
+typedef struct SDL_MouseMotionEvent
+{
+    Uint32 type;        /**< ::SDL_MOUSEMOTION */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    Uint32 windowID;    /**< The window with mouse focus, if any */
+    Uint32 which;       /**< The mouse instance id, or SDL_TOUCH_MOUSEID */
+    Uint32 state;       /**< The current button state */
+    Sint32 x;           /**< X coordinate, relative to window */
+    Sint32 y;           /**< Y coordinate, relative to window */
+    Sint32 xrel;        /**< The relative motion in the X direction */
+    Sint32 yrel;        /**< The relative motion in the Y direction */
+} SDL_MouseMotionEvent;
+
+/**
+ *  \brief Mouse button event structure (event.button.*)
+ */
+typedef struct SDL_MouseButtonEvent
+{
+    Uint32 type;        /**< ::SDL_MOUSEBUTTONDOWN or ::SDL_MOUSEBUTTONUP */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    Uint32 windowID;    /**< The window with mouse focus, if any */
+    Uint32 which;       /**< The mouse instance id, or SDL_TOUCH_MOUSEID */
+    Uint8 button;       /**< The mouse button index */
+    Uint8 state;        /**< ::SDL_PRESSED or ::SDL_RELEASED */
+    Uint8 clicks;       /**< 1 for single-click, 2 for double-click, etc. */
+    Uint8 padding1;
+    Sint32 x;           /**< X coordinate, relative to window */
+    Sint32 y;           /**< Y coordinate, relative to window */
+} SDL_MouseButtonEvent;
+
+/**
+ *  \brief Mouse wheel event structure (event.wheel.*)
+ */
+typedef struct SDL_MouseWheelEvent
+{
+    Uint32 type;        /**< ::SDL_MOUSEWHEEL */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    Uint32 windowID;    /**< The window with mouse focus, if any */
+    Uint32 which;       /**< The mouse instance id, or SDL_TOUCH_MOUSEID */
+    Sint32 x;           /**< The amount scrolled horizontally, positive to the right and negative to the left */
+    Sint32 y;           /**< The amount scrolled vertically, positive away from the user and negative toward the user */
+    Uint32 direction;   /**< Set to one of the SDL_MOUSEWHEEL_* defines. When FLIPPED the values in X and Y will be opposite. Multiply by -1 to change them back */
+} SDL_MouseWheelEvent;
+
+/**
+ *  \brief Joystick axis motion event structure (event.jaxis.*)
+ */
+typedef struct SDL_JoyAxisEvent
+{
+    Uint32 type;        /**< ::SDL_JOYAXISMOTION */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    SDL_JoystickID which; /**< The joystick instance id */
+    Uint8 axis;         /**< The joystick axis index */
+    Uint8 padding1;
+    Uint8 padding2;
+    Uint8 padding3;
+    Sint16 value;       /**< The axis value (range: -32768 to 32767) */
+    Uint16 padding4;
+} SDL_JoyAxisEvent;
+
+/**
+ *  \brief Joystick trackball motion event structure (event.jball.*)
+ */
+typedef struct SDL_JoyBallEvent
+{
+    Uint32 type;        /**< ::SDL_JOYBALLMOTION */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    SDL_JoystickID which; /**< The joystick instance id */
+    Uint8 ball;         /**< The joystick trackball index */
+    Uint8 padding1;
+    Uint8 padding2;
+    Uint8 padding3;
+    Sint16 xrel;        /**< The relative motion in the X direction */
+    Sint16 yrel;        /**< The relative motion in the Y direction */
+} SDL_JoyBallEvent;
+
+/**
+ *  \brief Joystick hat position change event structure (event.jhat.*)
+ */
+typedef struct SDL_JoyHatEvent
+{
+    Uint32 type;        /**< ::SDL_JOYHATMOTION */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    SDL_JoystickID which; /**< The joystick instance id */
+    Uint8 hat;          /**< The joystick hat index */
+    Uint8 value;        /**< The hat position value.
+                         *   \sa ::SDL_HAT_LEFTUP ::SDL_HAT_UP ::SDL_HAT_RIGHTUP
+                         *   \sa ::SDL_HAT_LEFT ::SDL_HAT_CENTERED ::SDL_HAT_RIGHT
+                         *   \sa ::SDL_HAT_LEFTDOWN ::SDL_HAT_DOWN ::SDL_HAT_RIGHTDOWN
+                         *
+                         *   Note that zero means the POV is centered.
+                         */
+    Uint8 padding1;
+    Uint8 padding2;
+} SDL_JoyHatEvent;
+
+/**
+ *  \brief Joystick button event structure (event.jbutton.*)
+ */
+typedef struct SDL_JoyButtonEvent
+{
+    Uint32 type;        /**< ::SDL_JOYBUTTONDOWN or ::SDL_JOYBUTTONUP */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    SDL_JoystickID which; /**< The joystick instance id */
+    Uint8 button;       /**< The joystick button index */
+    Uint8 state;        /**< ::SDL_PRESSED or ::SDL_RELEASED */
+    Uint8 padding1;
+    Uint8 padding2;
+} SDL_JoyButtonEvent;
+
+/**
+ *  \brief Joystick device event structure (event.jdevice.*)
+ */
+typedef struct SDL_JoyDeviceEvent
+{
+    Uint32 type;        /**< ::SDL_JOYDEVICEADDED or ::SDL_JOYDEVICEREMOVED */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    Sint32 which;       /**< The joystick device index for the ADDED event, instance id for the REMOVED event */
+} SDL_JoyDeviceEvent;
+
+
+/**
+ *  \brief Game controller axis motion event structure (event.caxis.*)
+ */
+typedef struct SDL_ControllerAxisEvent
+{
+    Uint32 type;        /**< ::SDL_CONTROLLERAXISMOTION */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    SDL_JoystickID which; /**< The joystick instance id */
+    Uint8 axis;         /**< The controller axis (SDL_GameControllerAxis) */
+    Uint8 padding1;
+    Uint8 padding2;
+    Uint8 padding3;
+    Sint16 value;       /**< The axis value (range: -32768 to 32767) */
+    Uint16 padding4;
+} SDL_ControllerAxisEvent;
+
+
+/**
+ *  \brief Game controller button event structure (event.cbutton.*)
+ */
+typedef struct SDL_ControllerButtonEvent
+{
+    Uint32 type;        /**< ::SDL_CONTROLLERBUTTONDOWN or ::SDL_CONTROLLERBUTTONUP */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    SDL_JoystickID which; /**< The joystick instance id */
+    Uint8 button;       /**< The controller button (SDL_GameControllerButton) */
+    Uint8 state;        /**< ::SDL_PRESSED or ::SDL_RELEASED */
+    Uint8 padding1;
+    Uint8 padding2;
+} SDL_ControllerButtonEvent;
+
+
+/**
+ *  \brief Controller device event structure (event.cdevice.*)
+ */
+typedef struct SDL_ControllerDeviceEvent
+{
+    Uint32 type;        /**< ::SDL_CONTROLLERDEVICEADDED, ::SDL_CONTROLLERDEVICEREMOVED, or ::SDL_CONTROLLERDEVICEREMAPPED */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    Sint32 which;       /**< The joystick device index for the ADDED event, instance id for the REMOVED or REMAPPED event */
+} SDL_ControllerDeviceEvent;
+
+/**
+ *  \brief Game controller touchpad event structure (event.ctouchpad.*)
+ */
+typedef struct SDL_ControllerTouchpadEvent
+{
+    Uint32 type;        /**< ::SDL_CONTROLLERTOUCHPADDOWN or ::SDL_CONTROLLERTOUCHPADMOTION or ::SDL_CONTROLLERTOUCHPADUP */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    SDL_JoystickID which; /**< The joystick instance id */
+    Sint32 touchpad;    /**< The index of the touchpad */
+    Sint32 finger;      /**< The index of the finger on the touchpad */
+    float x;            /**< Normalized in the range 0...1 with 0 being on the left */
+    float y;            /**< Normalized in the range 0...1 with 0 being at the top */
+    float pressure;     /**< Normalized in the range 0...1 */
+} SDL_ControllerTouchpadEvent;
+
+/**
+ *  \brief Game controller sensor event structure (event.csensor.*)
+ */
+typedef struct SDL_ControllerSensorEvent
+{
+    Uint32 type;        /**< ::SDL_CONTROLLERSENSORUPDATE */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    SDL_JoystickID which; /**< The joystick instance id */
+    Sint32 sensor;      /**< The type of the sensor, one of the values of ::SDL_SensorType */
+    float data[3];      /**< Up to 3 values from the sensor, as defined in SDL_sensor.h */
+} SDL_ControllerSensorEvent;
+
+/**
+ *  \brief Audio device event structure (event.adevice.*)
+ */
+typedef struct SDL_AudioDeviceEvent
+{
+    Uint32 type;        /**< ::SDL_AUDIODEVICEADDED, or ::SDL_AUDIODEVICEREMOVED */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    Uint32 which;       /**< The audio device index for the ADDED event (valid until next SDL_GetNumAudioDevices() call), SDL_AudioDeviceID for the REMOVED event */
+    Uint8 iscapture;    /**< zero if an output device, non-zero if a capture device. */
+    Uint8 padding1;
+    Uint8 padding2;
+    Uint8 padding3;
+} SDL_AudioDeviceEvent;
+
+
+/**
+ *  \brief Touch finger event structure (event.tfinger.*)
+ */
+typedef struct SDL_TouchFingerEvent
+{
+    Uint32 type;        /**< ::SDL_FINGERMOTION or ::SDL_FINGERDOWN or ::SDL_FINGERUP */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    SDL_TouchID touchId; /**< The touch device id */
+    SDL_FingerID fingerId;
+    float x;            /**< Normalized in the range 0...1 */
+    float y;            /**< Normalized in the range 0...1 */
+    float dx;           /**< Normalized in the range -1...1 */
+    float dy;           /**< Normalized in the range -1...1 */
+    float pressure;     /**< Normalized in the range 0...1 */
+    Uint32 windowID;    /**< The window underneath the finger, if any */
+} SDL_TouchFingerEvent;
+
+
+/**
+ *  \brief Multiple Finger Gesture Event (event.mgesture.*)
+ */
+typedef struct SDL_MultiGestureEvent
+{
+    Uint32 type;        /**< ::SDL_MULTIGESTURE */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    SDL_TouchID touchId; /**< The touch device id */
+    float dTheta;
+    float dDist;
+    float x;
+    float y;
+    Uint16 numFingers;
+    Uint16 padding;
+} SDL_MultiGestureEvent;
+
+
+/**
+ * \brief Dollar Gesture Event (event.dgesture.*)
+ */
+typedef struct SDL_DollarGestureEvent
+{
+    Uint32 type;        /**< ::SDL_DOLLARGESTURE or ::SDL_DOLLARRECORD */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    SDL_TouchID touchId; /**< The touch device id */
+    SDL_GestureID gestureId;
+    Uint32 numFingers;
+    float error;
+    float x;            /**< Normalized center of gesture */
+    float y;            /**< Normalized center of gesture */
+} SDL_DollarGestureEvent;
+
+
+/**
+ *  \brief An event used to request a file open by the system (event.drop.*)
+ *         This event is enabled by default, you can disable it with SDL_EventState().
+ *  \note If this event is enabled, you must free the filename in the event.
+ */
+typedef struct SDL_DropEvent
+{
+    Uint32 type;        /**< ::SDL_DROPBEGIN or ::SDL_DROPFILE or ::SDL_DROPTEXT or ::SDL_DROPCOMPLETE */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    char *file;         /**< The file name, which should be freed with SDL_free(), is NULL on begin/complete */
+    Uint32 windowID;    /**< The window that was dropped on, if any */
+} SDL_DropEvent;
+
+
+/**
+ *  \brief Sensor event structure (event.sensor.*)
+ */
+typedef struct SDL_SensorEvent
+{
+    Uint32 type;        /**< ::SDL_SENSORUPDATE */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    Sint32 which;       /**< The instance ID of the sensor */
+    float data[6];      /**< Up to 6 values from the sensor - additional values can be queried using SDL_SensorGetData() */
+} SDL_SensorEvent;
+
+/**
+ *  \brief The "quit requested" event
+ */
+typedef struct SDL_QuitEvent
+{
+    Uint32 type;        /**< ::SDL_QUIT */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+} SDL_QuitEvent;
+
+/**
+ *  \brief OS Specific event
+ */
+typedef struct SDL_OSEvent
+{
+    Uint32 type;        /**< ::SDL_QUIT */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+} SDL_OSEvent;
+
+/**
+ *  \brief A user-defined event type (event.user.*)
+ */
+typedef struct SDL_UserEvent
+{
+    Uint32 type;        /**< ::SDL_USEREVENT through ::SDL_LASTEVENT-1 */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    Uint32 windowID;    /**< The associated window if any */
+    Sint32 code;        /**< User defined event code */
+    void *data1;        /**< User defined data pointer */
+    void *data2;        /**< User defined data pointer */
+} SDL_UserEvent;
+
+
+struct SDL_SysWMmsg;
+typedef struct SDL_SysWMmsg SDL_SysWMmsg;
+
+/**
+ *  \brief A video driver dependent system event (event.syswm.*)
+ *         This event is disabled by default, you can enable it with SDL_EventState()
+ *
+ *  \note If you want to use this event, you should include SDL_syswm.h.
+ */
+typedef struct SDL_SysWMEvent
+{
+    Uint32 type;        /**< ::SDL_SYSWMEVENT */
+    Uint32 timestamp;   /**< In milliseconds, populated using SDL_GetTicks() */
+    SDL_SysWMmsg *msg;  /**< driver dependent data, defined in SDL_syswm.h */
+} SDL_SysWMEvent;
+
+/**
+ *  \brief General event structure
+ */
+typedef union SDL_Event
+{
+    Uint32 type;                            /**< Event type, shared with all events */
+    SDL_CommonEvent common;                 /**< Common event data */
+    SDL_DisplayEvent display;               /**< Display event data */
+    SDL_WindowEvent window;                 /**< Window event data */
+    SDL_KeyboardEvent key;                  /**< Keyboard event data */
+    SDL_TextEditingEvent edit;              /**< Text editing event data */
+    SDL_TextInputEvent text;                /**< Text input event data */
+    SDL_MouseMotionEvent motion;            /**< Mouse motion event data */
+    SDL_MouseButtonEvent button;            /**< Mouse button event data */
+    SDL_MouseWheelEvent wheel;              /**< Mouse wheel event data */
+    SDL_JoyAxisEvent jaxis;                 /**< Joystick axis event data */
+    SDL_JoyBallEvent jball;                 /**< Joystick ball event data */
+    SDL_JoyHatEvent jhat;                   /**< Joystick hat event data */
+    SDL_JoyButtonEvent jbutton;             /**< Joystick button event data */
+    SDL_JoyDeviceEvent jdevice;             /**< Joystick device change event data */
+    SDL_ControllerAxisEvent caxis;          /**< Game Controller axis event data */
+    SDL_ControllerButtonEvent cbutton;      /**< Game Controller button event data */
+    SDL_ControllerDeviceEvent cdevice;      /**< Game Controller device event data */
+    SDL_ControllerTouchpadEvent ctouchpad;  /**< Game Controller touchpad event data */
+    SDL_ControllerSensorEvent csensor;      /**< Game Controller sensor event data */
+    SDL_AudioDeviceEvent adevice;           /**< Audio device event data */
+    SDL_SensorEvent sensor;                 /**< Sensor event data */
+    SDL_QuitEvent quit;                     /**< Quit request event data */
+    SDL_UserEvent user;                     /**< Custom event data */
+    SDL_SysWMEvent syswm;                   /**< System dependent window event data */
+    SDL_TouchFingerEvent tfinger;           /**< Touch finger event data */
+    SDL_MultiGestureEvent mgesture;         /**< Gesture event data */
+    SDL_DollarGestureEvent dgesture;        /**< Gesture event data */
+    SDL_DropEvent drop;                     /**< Drag and drop event data */
+
+    /* This is necessary for ABI compatibility between Visual C++ and GCC
+       Visual C++ will respect the push pack pragma and use 52 bytes for
+       this structure, and GCC will use the alignment of the largest datatype
+       within the union, which is 8 bytes.
+
+       So... we'll add padding to force the size to be 56 bytes for both.
+    */
+    Uint8 padding[56];
+} SDL_Event;
+
+/* Make sure we haven't broken binary compatibility */
+SDL_COMPILE_TIME_ASSERT(SDL_Event, sizeof(SDL_Event) == 56);
+
+
+/* Function prototypes */
+
+/**
+ *  Pumps the event loop, gathering events from the input devices.
+ *
+ *  This function updates the event queue and internal input device state.
+ *
+ *  This should only be run in the thread that sets the video mode.
+ */
+extern DECLSPEC void SDLCALL SDL_PumpEvents(void);
+
+/* @{ */
+typedef enum
+{
+    SDL_ADDEVENT,
+    SDL_PEEKEVENT,
+    SDL_GETEVENT
+} SDL_eventaction;
+
+/**
+ *  Checks the event queue for messages and optionally returns them.
+ *
+ *  If \c action is ::SDL_ADDEVENT, up to \c numevents events will be added to
+ *  the back of the event queue.
+ *
+ *  If \c action is ::SDL_PEEKEVENT, up to \c numevents events at the front
+ *  of the event queue, within the specified minimum and maximum type,
+ *  will be returned and will not be removed from the queue.
+ *
+ *  If \c action is ::SDL_GETEVENT, up to \c numevents events at the front
+ *  of the event queue, within the specified minimum and maximum type,
+ *  will be returned and will be removed from the queue.
+ *
+ *  \return The number of events actually stored, or -1 if there was an error.
+ *
+ *  This function is thread-safe.
+ */
+extern DECLSPEC int SDLCALL SDL_PeepEvents(SDL_Event * events, int numevents,
+                                           SDL_eventaction action,
+                                           Uint32 minType, Uint32 maxType);
+/* @} */
+
+/**
+ *  Checks to see if certain event types are in the event queue.
+ */
+extern DECLSPEC SDL_bool SDLCALL SDL_HasEvent(Uint32 type);
+extern DECLSPEC SDL_bool SDLCALL SDL_HasEvents(Uint32 minType, Uint32 maxType);
+
+/**
+ *  This function clears events from the event queue
+ *  This function only affects currently queued events. If you want to make
+ *  sure that all pending OS events are flushed, you can call SDL_PumpEvents()
+ *  on the main thread immediately before the flush call.
+ */
+extern DECLSPEC void SDLCALL SDL_FlushEvent(Uint32 type);
+extern DECLSPEC void SDLCALL SDL_FlushEvents(Uint32 minType, Uint32 maxType);
+
+/**
+ *  \brief Polls for currently pending events.
+ *
+ *  \return 1 if there are any pending events, or 0 if there are none available.
+ *
+ *  \param event If not NULL, the next event is removed from the queue and
+ *               stored in that area.
+ */
+extern DECLSPEC int SDLCALL SDL_PollEvent(SDL_Event * event);
+
+/**
+ *  \brief Waits indefinitely for the next available event.
+ *
+ *  \return 1, or 0 if there was an error while waiting for events.
+ *
+ *  \param event If not NULL, the next event is removed from the queue and
+ *               stored in that area.
+ */
+extern DECLSPEC int SDLCALL SDL_WaitEvent(SDL_Event * event);
+
+/**
+ *  \brief Waits until the specified timeout (in milliseconds) for the next
+ *         available event.
+ *
+ *  \return 1, or 0 if there was an error while waiting for events.
+ *
+ *  \param event If not NULL, the next event is removed from the queue and
+ *               stored in that area.
+ *  \param timeout The timeout (in milliseconds) to wait for next event.
+ */
+extern DECLSPEC int SDLCALL SDL_WaitEventTimeout(SDL_Event * event,
+                                                 int timeout);
+
+/**
+ *  \brief Add an event to the event queue.
+ *
+ *  \return 1 on success, 0 if the event was filtered, or -1 if the event queue
+ *          was full or there was some other error.
+ */
+extern DECLSPEC int SDLCALL SDL_PushEvent(SDL_Event * event);
+
+typedef int (SDLCALL * SDL_EventFilter) (void *userdata, SDL_Event * event);
+
+/**
+ *  Sets up a filter to process all events before they change internal state and
+ *  are posted to the internal event queue.
+ *
+ *  The filter is prototyped as:
+ *  \code
+ *      int SDL_EventFilter(void *userdata, SDL_Event * event);
+ *  \endcode
+ *
+ *  If the filter returns 1, then the event will be added to the internal queue.
+ *  If it returns 0, then the event will be dropped from the queue, but the
+ *  internal state will still be updated.  This allows selective filtering of
+ *  dynamically arriving events.
+ *
+ *  \warning  Be very careful of what you do in the event filter function, as
+ *            it may run in a different thread!
+ *
+ *  There is one caveat when dealing with the ::SDL_QuitEvent event type.  The
+ *  event filter is only called when the window manager desires to close the
+ *  application window.  If the event filter returns 1, then the window will
+ *  be closed, otherwise the window will remain open if possible.
+ *
+ *  If the quit event is generated by an interrupt signal, it will bypass the
+ *  internal queue and be delivered to the application at the next event poll.
+ */
+extern DECLSPEC void SDLCALL SDL_SetEventFilter(SDL_EventFilter filter,
+                                                void *userdata);
+
+/**
+ *  Return the current event filter - can be used to "chain" filters.
+ *  If there is no event filter set, this function returns SDL_FALSE.
+ */
+extern DECLSPEC SDL_bool SDLCALL SDL_GetEventFilter(SDL_EventFilter * filter,
+                                                    void **userdata);
+
+/**
+ *  Add a function which is called when an event is added to the queue.
+ */
+extern DECLSPEC void SDLCALL SDL_AddEventWatch(SDL_EventFilter filter,
+                                               void *userdata);
+
+/**
+ *  Remove an event watch function added with SDL_AddEventWatch()
+ */
+extern DECLSPEC void SDLCALL SDL_DelEventWatch(SDL_EventFilter filter,
+                                               void *userdata);
+
+/**
+ *  Run the filter function on the current event queue, removing any
+ *  events for which the filter returns 0.
+ */
+extern DECLSPEC void SDLCALL SDL_FilterEvents(SDL_EventFilter filter,
+                                              void *userdata);
+
+/* @{ */
+#define SDL_QUERY   -1
+#define SDL_IGNORE   0
+#define SDL_DISABLE  0
+#define SDL_ENABLE   1
+
+/**
+ *  This function allows you to set the state of processing certain events.
+ *   - If \c state is set to ::SDL_IGNORE, that event will be automatically
+ *     dropped from the event queue and will not be filtered.
+ *   - If \c state is set to ::SDL_ENABLE, that event will be processed
+ *     normally.
+ *   - If \c state is set to ::SDL_QUERY, SDL_EventState() will return the
+ *     current processing state of the specified event.
+ */
+extern DECLSPEC Uint8 SDLCALL SDL_EventState(Uint32 type, int state);
+/* @} */
+#define SDL_GetEventState(type) SDL_EventState(type, SDL_QUERY)
+
+/**
+ *  This function allocates a set of user-defined events, and returns
+ *  the beginning event number for that set of events.
+ *
+ *  If there aren't enough user-defined events left, this function
+ *  returns (Uint32)-1
+ */
+extern DECLSPEC Uint32 SDLCALL SDL_RegisterEvents(int numevents);
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_events_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */