getargv 0.3.0-universal-darwin → 0.3.3-universal-darwin

data/vendor/bundle/ruby/3.3.0/gems/rbs-2.8.4/core/regexp.rbs

@@ -0,0 +1,1224 @@
+# <!-- rdoc-file=re.c -->
+# A Regexp holds a regular expression, used to match a pattern against strings.
+# Regexps are created using the `/.../` and `%r{...}` literals, and by the
+# Regexp::new constructor.
+#
+# You can create a Regexp object explicitly with:
+#
+# *   A [regexp literal](doc/syntax/literals_rdoc.html#label-Regexp+Literals).
+#
+#
+# Regular expressions (*regexp*s) are patterns which describe the contents of a
+# string. They're used for testing whether a string contains a given pattern, or
+# extracting the portions that match. They are created with the `/`*pat*`/` and
+# `%r{`*pat*`}` literals or the `Regexp.new` constructor.
+#
+# A regexp is usually delimited with forward slashes (`/`). For example:
+#
+#     /hay/ =~ 'haystack'   #=> 0
+#     /y/.match('haystack') #=> #<MatchData "y">
+#
+# If a string contains the pattern it is said to *match*. A literal string
+# matches itself.
+#
+# Here 'haystack' does not contain the pattern 'needle', so it doesn't match:
+#
+#     /needle/.match('haystack') #=> nil
+#
+# Here 'haystack' contains the pattern 'hay', so it matches:
+#
+#     /hay/.match('haystack')    #=> #<MatchData "hay">
+#
+# Specifically, `/st/` requires that the string contains the letter *s* followed
+# by the letter *t*, so it matches *haystack*, also.
+#
+# ## `=~` and Regexp#match
+#
+# Pattern matching may be achieved by using `=~` operator or Regexp#match
+# method.
+#
+# ### `=~` operator
+#
+# `=~` is Ruby's basic pattern-matching operator.  When one operand is a regular
+# expression and the other is a string then the regular expression is used as a
+# pattern to match against the string.  (This operator is equivalently defined
+# by Regexp and String so the order of String and Regexp do not matter. Other
+# classes may have different implementations of `=~`.)  If a match is found, the
+# operator returns index of first match in string, otherwise it returns `nil`.
+#
+#     /hay/ =~ 'haystack'   #=> 0
+#     'haystack' =~ /hay/   #=> 0
+#     /a/   =~ 'haystack'   #=> 1
+#     /u/   =~ 'haystack'   #=> nil
+#
+# Using `=~` operator with a String and Regexp the `$~` global variable is set
+# after a successful match.  `$~` holds a MatchData object. Regexp.last_match is
+# equivalent to `$~`.
+#
+# ### Regexp#match method
+#
+# The #match method returns a MatchData object:
+#
+#     /st/.match('haystack')   #=> #<MatchData "st">
+#
+# ## Metacharacters and Escapes
+#
+# The following are *metacharacters* `(`, `)`, `[`, `]`, `{`, `}`, `.`, `?`,
+# `+`, `*`. They have a specific meaning when appearing in a pattern. To match
+# them literally they must be backslash-escaped. To match a backslash literally,
+# backslash-escape it: `\\\`.
+#
+#     /1 \+ 2 = 3\?/.match('Does 1 + 2 = 3?') #=> #<MatchData "1 + 2 = 3?">
+#     /a\\\\b/.match('a\\\\b')                    #=> #<MatchData "a\\b">
+#
+# Patterns behave like double-quoted strings and can contain the same backslash
+# escapes (the meaning of `\s` is different, however, see
+# [below](#label-Character+Classes)).
+#
+#     /\s\u{6771 4eac 90fd}/.match("Go to 東京都")
+#         #=> #<MatchData " 東京都">
+#
+# Arbitrary Ruby expressions can be embedded into patterns with the `#{...}`
+# construct.
+#
+#     place = "東京都"
+#     /#{place}/.match("Go to 東京都")
+#         #=> #<MatchData "東京都">
+#
+# ## Character Classes
+#
+# A *character class* is delimited with square brackets (`[`, `]`) and lists
+# characters that may appear at that point in the match. `/[ab]/` means *a* or
+# *b*, as opposed to `/ab/` which means *a* followed by *b*.
+#
+#     /W[aeiou]rd/.match("Word") #=> #<MatchData "Word">
+#
+# Within a character class the hyphen (`-`) is a metacharacter denoting an
+# inclusive range of characters. `[abcd]` is equivalent to `[a-d]`. A range can
+# be followed by another range, so `[abcdwxyz]` is equivalent to `[a-dw-z]`. The
+# order in which ranges or individual characters appear inside a character class
+# is irrelevant.
+#
+#     /[0-9a-f]/.match('9f') #=> #<MatchData "9">
+#     /[9f]/.match('9f')     #=> #<MatchData "9">
+#
+# If the first character of a character class is a caret (`^`) the class is
+# inverted: it matches any character *except* those named.
+#
+#     /[^a-eg-z]/.match('f') #=> #<MatchData "f">
+#
+# A character class may contain another character class. By itself this isn't
+# useful because `[a-z[0-9]]` describes the same set as `[a-z0-9]`. However,
+# character classes also support the `&&` operator which performs set
+# intersection on its arguments. The two can be combined as follows:
+#
+#     /[a-w&&[^c-g]z]/ # ([a-w] AND ([^c-g] OR z))
+#
+# This is equivalent to:
+#
+#     /[abh-w]/
+#
+# The following metacharacters also behave like character classes:
+#
+# *   `/./` - Any character except a newline.
+# *   `/./m` - Any character (the `m` modifier enables multiline mode)
+# *   `/\w/` - A word character (`[a-zA-Z0-9_]`)
+# *   `/\W/` - A non-word character (`[^a-zA-Z0-9_]`). Please take a look at
+#     [Bug #4044](https://bugs.ruby-lang.org/issues/4044) if using `/\W/` with
+#     the `/i` modifier.
+# *   `/\d/` - A digit character (`[0-9]`)
+# *   `/\D/` - A non-digit character (`[^0-9]`)
+# *   `/\h/` - A hexdigit character (`[0-9a-fA-F]`)
+# *   `/\H/` - A non-hexdigit character (`[^0-9a-fA-F]`)
+# *   `/\s/` - A whitespace character: `/[ \t\r\n\f\v]/`
+# *   `/\S/` - A non-whitespace character: `/[^ \t\r\n\f\v]/`
+# *   `/\R/` - A linebreak: `\n`, `\v`, `\f`, `\r` `\u0085` (NEXT LINE),
+#     `\u2028` (LINE SEPARATOR), `\u2029` (PARAGRAPH SEPARATOR) or `\r\n`.
+#
+#
+# POSIX *bracket expressions* are also similar to character classes. They
+# provide a portable alternative to the above, with the added benefit that they
+# encompass non-ASCII characters. For instance, `/\d/` matches only the ASCII
+# decimal digits (0-9); whereas `/[[:digit:]]/` matches any character in the
+# Unicode *Nd* category.
+#
+# *   `/[[:alnum:]]/` - Alphabetic and numeric character
+# *   `/[[:alpha:]]/` - Alphabetic character
+# *   `/[[:blank:]]/` - Space or tab
+# *   `/[[:cntrl:]]/` - Control character
+# *   `/[[:digit:]]/` - Digit
+# *   `/[[:graph:]]/` - Non-blank character (excludes spaces, control
+#     characters, and similar)
+# *   `/[[:lower:]]/` - Lowercase alphabetical character
+# *   `/[[:print:]]/` - Like [:graph:], but includes the space character
+# *   `/[[:punct:]]/` - Punctuation character
+# *   `/[[:space:]]/` - Whitespace character (`[:blank:]`, newline, carriage
+#     return, etc.)
+# *   `/[[:upper:]]/` - Uppercase alphabetical
+# *   `/[[:xdigit:]]/` - Digit allowed in a hexadecimal number (i.e., 0-9a-fA-F)
+#
+#
+# Ruby also supports the following non-POSIX character classes:
+#
+# *   `/[[:word:]]/` - A character in one of the following Unicode general
+#     categories *Letter*, *Mark*, *Number*, *Connector_Punctuation*
+# *   `/[[:ascii:]]/` - A character in the ASCII character set
+#
+#         # U+06F2 is "EXTENDED ARABIC-INDIC DIGIT TWO"
+#         /[[:digit:]]/.match("\u06F2")    #=> #<MatchData "\u{06F2}">
+#         /[[:upper:]][[:lower:]]/.match("Hello") #=> #<MatchData "He">
+#         /[[:xdigit:]][[:xdigit:]]/.match("A6")  #=> #<MatchData "A6">
+#
+#
+# ## Repetition
+#
+# The constructs described so far match a single character. They can be followed
+# by a repetition metacharacter to specify how many times they need to occur.
+# Such metacharacters are called *quantifiers*.
+#
+# *   `*` - Zero or more times
+# *   `+` - One or more times
+# *   `?` - Zero or one times (optional)
+# *   `{`*n*`}` - Exactly *n* times
+# *   `{`*n*`,}` - *n* or more times
+# *   `{,`*m*`}` - *m* or less times
+# *   `{`*n*`,`*m*`}` - At least *n* and at most *m* times
+#
+#
+# At least one uppercase character ('H'), at least one lowercase character
+# ('e'), two 'l' characters, then one 'o':
+#
+#     "Hello".match(/[[:upper:]]+[[:lower:]]+l{2}o/) #=> #<MatchData "Hello">
+#
+# ### Greedy match
+#
+# Repetition is *greedy* by default: as many occurrences as possible are matched
+# while still allowing the overall match to succeed. By contrast, *lazy*
+# matching makes the minimal amount of matches necessary for overall success.
+# Most greedy metacharacters can be made lazy by following them with `?`. For
+# the `{n}` pattern, because it specifies an exact number of characters to match
+# and not a variable number of characters, the `?` metacharacter instead makes
+# the repeated pattern optional.
+#
+# Both patterns below match the string. The first uses a greedy quantifier so
+# '.+' matches '<a><b>'; the second uses a lazy quantifier so '.+?' matches
+# '<a>':
+#
+#     /<.+>/.match("<a><b>")  #=> #<MatchData "<a><b>">
+#     /<.+?>/.match("<a><b>") #=> #<MatchData "<a>">
+#
+# ### Possessive match
+#
+# A quantifier followed by `+` matches *possessively*: once it has matched it
+# does not backtrack. They behave like greedy quantifiers, but having matched
+# they refuse to "give up" their match even if this jeopardises the overall
+# match.
+#
+#     /<.*><.+>/.match("<a><b>") #=> #<MatchData "<a><b>">
+#     /<.*+><.+>/.match("<a><b>") #=> nil
+#     /<.*><.++>/.match("<a><b>") #=> nil
+#
+# ## Capturing
+#
+# Parentheses can be used for *capturing*. The text enclosed by the *n*th group
+# of parentheses can be subsequently referred to with *n*. Within a pattern use
+# the *backreference* `\n` (e.g. `\1`); outside of the pattern use
+# `MatchData[n]` (e.g. `MatchData[1]`).
+#
+# In this example, `'at'` is captured by the first group of parentheses, then
+# referred to later with `\1`:
+#
+#     /[csh](..) [csh]\1 in/.match("The cat sat in the hat")
+#         #=> #<MatchData "cat sat in" 1:"at">
+#
+# Regexp#match returns a MatchData object which makes the captured text
+# available with its #[] method:
+#
+#     /[csh](..) [csh]\1 in/.match("The cat sat in the hat")[1] #=> 'at'
+#
+# While Ruby supports an arbitrary number of numbered captured groups, only
+# groups 1-9 are supported using the `\n` backreference syntax.
+#
+# Ruby also supports `\0` as a special backreference, which references the
+# entire matched string.  This is also available at `MatchData[0]`.  Note that
+# the `\0` backreference cannot be used inside the regexp, as backreferences can
+# only be used after the end of the capture group, and the `\0` backreference
+# uses the implicit capture group of the entire match.  However, you can use
+# this backreference when doing substitution:
+#
+#     "The cat sat in the hat".gsub(/[csh]at/, '\0s')
+#       # => "The cats sats in the hats"
+#
+# ### Named captures
+#
+# Capture groups can be referred to by name when defined with the
+# `(?<`*name*`>)` or `(?'`*name*`')` constructs.
+#
+#     /\$(?<dollars>\d+)\.(?<cents>\d+)/.match("$3.67")
+#         #=> #<MatchData "$3.67" dollars:"3" cents:"67">
+#     /\$(?<dollars>\d+)\.(?<cents>\d+)/.match("$3.67")[:dollars] #=> "3"
+#
+# Named groups can be backreferenced with `\k<`*name*`>`, where *name* is the
+# group name.
+#
+#     /(?<vowel>[aeiou]).\k<vowel>.\k<vowel>/.match('ototomy')
+#         #=> #<MatchData "ototo" vowel:"o">
+#
+# **Note**: A regexp can't use named backreferences and numbered backreferences
+# simultaneously. Also, if a named capture is used in a regexp, then parentheses
+# used for grouping which would otherwise result in a unnamed capture are
+# treated as non-capturing.
+#
+#     /(\w)(\w)/.match("ab").captures # => ["a", "b"]
+#     /(\w)(\w)/.match("ab").named_captures # => {}
+#
+#     /(?<c>\w)(\w)/.match("ab").captures # => ["a"]
+#     /(?<c>\w)(\w)/.match("ab").named_captures # => {"c"=>"a"}
+#
+# When named capture groups are used with a literal regexp on the left-hand side
+# of an expression and the `=~` operator, the captured text is also assigned to
+# local variables with corresponding names.
+#
+#     /\$(?<dollars>\d+)\.(?<cents>\d+)/ =~ "$3.67" #=> 0
+#     dollars #=> "3"
+#
+# ## Grouping
+#
+# Parentheses also *group* the terms they enclose, allowing them to be
+# quantified as one *atomic* whole.
+#
+# The pattern below matches a vowel followed by 2 word characters:
+#
+#     /[aeiou]\w{2}/.match("Caenorhabditis elegans") #=> #<MatchData "aen">
+#
+# Whereas the following pattern matches a vowel followed by a word character,
+# twice, i.e. `[aeiou]\w[aeiou]\w`: 'enor'.
+#
+#     /([aeiou]\w){2}/.match("Caenorhabditis elegans")
+#         #=> #<MatchData "enor" 1:"or">
+#
+# The `(?:`...`)` construct provides grouping without capturing. That is, it
+# combines the terms it contains into an atomic whole without creating a
+# backreference. This benefits performance at the slight expense of readability.
+#
+# The first group of parentheses captures 'n' and the second 'ti'. The second
+# group is referred to later with the backreference `\2`:
+#
+#     /I(n)ves(ti)ga\2ons/.match("Investigations")
+#         #=> #<MatchData "Investigations" 1:"n" 2:"ti">
+#
+# The first group of parentheses is now made non-capturing with '?:', so it
+# still matches 'n', but doesn't create the backreference. Thus, the
+# backreference `\1` now refers to 'ti'.
+#
+#     /I(?:n)ves(ti)ga\1ons/.match("Investigations")
+#         #=> #<MatchData "Investigations" 1:"ti">
+#
+# ### Atomic Grouping
+#
+# Grouping can be made *atomic* with `(?>`*pat*`)`. This causes the
+# subexpression *pat* to be matched independently of the rest of the expression
+# such that what it matches becomes fixed for the remainder of the match, unless
+# the entire subexpression must be abandoned and subsequently revisited. In this
+# way *pat* is treated as a non-divisible whole. Atomic grouping is typically
+# used to optimise patterns so as to prevent the regular expression engine from
+# backtracking needlessly.
+#
+# The `"` in the pattern below matches the first character of the string, then
+# `.*` matches *Quote"*. This causes the overall match to fail, so the text
+# matched by `.*` is backtracked by one position, which leaves the final
+# character of the string available to match `"`
+#
+#     /".*"/.match('"Quote"')     #=> #<MatchData "\"Quote\"">
+#
+# If `.*` is grouped atomically, it refuses to backtrack *Quote"*, even though
+# this means that the overall match fails
+#
+#     /"(?>.*)"/.match('"Quote"') #=> nil
+#
+# ## Subexpression Calls
+#
+# The `\g<`*name*`>` syntax matches the previous subexpression named *name*,
+# which can be a group name or number, again. This differs from backreferences
+# in that it re-executes the group rather than simply trying to re-match the
+# same text.
+#
+# This pattern matches a *(* character and assigns it to the `paren` group,
+# tries to call that the `paren` sub-expression again but fails, then matches a
+# literal *)*:
+#
+#     /\A(?<paren>\(\g<paren>*\))*\z/ =~ '()'
+#
+#     /\A(?<paren>\(\g<paren>*\))*\z/ =~ '(())' #=> 0
+#     # ^1
+#     #      ^2
+#     #           ^3
+#     #                 ^4
+#     #      ^5
+#     #           ^6
+#     #                      ^7
+#     #                       ^8
+#     #                       ^9
+#     #                           ^10
+#
+# 1.  Matches at the beginning of the string, i.e. before the first character.
+# 2.  Enters a named capture group called `paren`
+# 3.  Matches a literal *(*, the first character in the string
+# 4.  Calls the `paren` group again, i.e. recurses back to the second step
+# 5.  Re-enters the `paren` group
+# 6.  Matches a literal *(*, the second character in the string
+# 7.  Try to call `paren` a third time, but fail because doing so would prevent
+#     an overall successful match
+# 8.  Match a literal *)*, the third character in the string. Marks the end of
+#     the second recursive call
+# 9.  Match a literal *)*, the fourth character in the string
+# 10. Match the end of the string
+#
+#
+# ## Alternation
+#
+# The vertical bar metacharacter (`|`) combines several expressions into a
+# single one that matches any of the expressions. Each expression is an
+# *alternative*.
+#
+#     /\w(and|or)\w/.match("Feliformia") #=> #<MatchData "form" 1:"or">
+#     /\w(and|or)\w/.match("furandi")    #=> #<MatchData "randi" 1:"and">
+#     /\w(and|or)\w/.match("dissemblance") #=> nil
+#
+# ## Character Properties
+#
+# The `\p{}` construct matches characters with the named property, much like
+# POSIX bracket classes.
+#
+# *   `/\p{Alnum}/` - Alphabetic and numeric character
+# *   `/\p{Alpha}/` - Alphabetic character
+# *   `/\p{Blank}/` - Space or tab
+# *   `/\p{Cntrl}/` - Control character
+# *   `/\p{Digit}/` - Digit
+# *   `/\p{Graph}/` - Non-blank character (excludes spaces, control characters,
+#     and similar)
+# *   `/\p{Lower}/` - Lowercase alphabetical character
+# *   `/\p{Print}/` - Like `\p{Graph}`, but includes the space character
+# *   `/\p{Punct}/` - Punctuation character
+# *   `/\p{Space}/` - Whitespace character (`[:blank:]`, newline, carriage
+#     return, etc.)
+# *   `/\p{Upper}/` - Uppercase alphabetical
+# *   `/\p{XDigit}/` - Digit allowed in a hexadecimal number (i.e., 0-9a-fA-F)
+# *   `/\p{Word}/` - A member of one of the following Unicode general category
+#     *Letter*, *Mark*, *Number*, *Connector_Punctuation*
+# *   `/\p{ASCII}/` - A character in the ASCII character set
+# *   `/\p{Any}/` - Any Unicode character (including unassigned characters)
+# *   `/\p{Assigned}/` - An assigned character
+#
+#
+# A Unicode character's *General Category* value can also be matched with
+# `\p{`*Ab*`}` where *Ab* is the category's abbreviation as described below:
+#
+# *   `/\p{L}/` - 'Letter'
+# *   `/\p{Ll}/` - 'Letter: Lowercase'
+# *   `/\p{Lm}/` - 'Letter: Mark'
+# *   `/\p{Lo}/` - 'Letter: Other'
+# *   `/\p{Lt}/` - 'Letter: Titlecase'
+# *   `/\p{Lu}/` - 'Letter: Uppercase
+# *   `/\p{Lo}/` - 'Letter: Other'
+# *   `/\p{M}/` - 'Mark'
+# *   `/\p{Mn}/` - 'Mark: Nonspacing'
+# *   `/\p{Mc}/` - 'Mark: Spacing Combining'
+# *   `/\p{Me}/` - 'Mark: Enclosing'
+# *   `/\p{N}/` - 'Number'
+# *   `/\p{Nd}/` - 'Number: Decimal Digit'
+# *   `/\p{Nl}/` - 'Number: Letter'
+# *   `/\p{No}/` - 'Number: Other'
+# *   `/\p{P}/` - 'Punctuation'
+# *   `/\p{Pc}/` - 'Punctuation: Connector'
+# *   `/\p{Pd}/` - 'Punctuation: Dash'
+# *   `/\p{Ps}/` - 'Punctuation: Open'
+# *   `/\p{Pe}/` - 'Punctuation: Close'
+# *   `/\p{Pi}/` - 'Punctuation: Initial Quote'
+# *   `/\p{Pf}/` - 'Punctuation: Final Quote'
+# *   `/\p{Po}/` - 'Punctuation: Other'
+# *   `/\p{S}/` - 'Symbol'
+# *   `/\p{Sm}/` - 'Symbol: Math'
+# *   `/\p{Sc}/` - 'Symbol: Currency'
+# *   `/\p{Sc}/` - 'Symbol: Currency'
+# *   `/\p{Sk}/` - 'Symbol: Modifier'
+# *   `/\p{So}/` - 'Symbol: Other'
+# *   `/\p{Z}/` - 'Separator'
+# *   `/\p{Zs}/` - 'Separator: Space'
+# *   `/\p{Zl}/` - 'Separator: Line'
+# *   `/\p{Zp}/` - 'Separator: Paragraph'
+# *   `/\p{C}/` - 'Other'
+# *   `/\p{Cc}/` - 'Other: Control'
+# *   `/\p{Cf}/` - 'Other: Format'
+# *   `/\p{Cn}/` - 'Other: Not Assigned'
+# *   `/\p{Co}/` - 'Other: Private Use'
+# *   `/\p{Cs}/` - 'Other: Surrogate'
+#
+#
+# Lastly, `\p{}` matches a character's Unicode *script*. The following scripts
+# are supported: *Arabic*, *Armenian*, *Balinese*, *Bengali*, *Bopomofo*,
+# *Braille*, *Buginese*, *Buhid*, *Canadian_Aboriginal*, *Carian*, *Cham*,
+# *Cherokee*, *Common*, *Coptic*, *Cuneiform*, *Cypriot*, *Cyrillic*, *Deseret*,
+# *Devanagari*, *Ethiopic*, *Georgian*, *Glagolitic*, *Gothic*, *Greek*,
+# *Gujarati*, *Gurmukhi*, *Han*, *Hangul*, *Hanunoo*, *Hebrew*, *Hiragana*,
+# *Inherited*, *Kannada*, *Katakana*, *Kayah_Li*, *Kharoshthi*, *Khmer*, *Lao*,
+# *Latin*, *Lepcha*, *Limbu*, *Linear_B*, *Lycian*, *Lydian*, *Malayalam*,
+# *Mongolian*, *Myanmar*, *New_Tai_Lue*, *Nko*, *Ogham*, *Ol_Chiki*,
+# *Old_Italic*, *Old_Persian*, *Oriya*, *Osmanya*, *Phags_Pa*, *Phoenician*,
+# *Rejang*, *Runic*, *Saurashtra*, *Shavian*, *Sinhala*, *Sundanese*,
+# *Syloti_Nagri*, *Syriac*, *Tagalog*, *Tagbanwa*, *Tai_Le*, *Tamil*, *Telugu*,
+# *Thaana*, *Thai*, *Tibetan*, *Tifinagh*, *Ugaritic*, *Vai*, and *Yi*.
+#
+# Unicode codepoint U+06E9 is named "ARABIC PLACE OF SAJDAH" and belongs to the
+# Arabic script:
+#
+#     /\p{Arabic}/.match("\u06E9") #=> #<MatchData "\u06E9">
+#
+# All character properties can be inverted by prefixing their name with a caret
+# (`^`).
+#
+# Letter 'A' is not in the Unicode Ll (Letter; Lowercase) category, so this
+# match succeeds:
+#
+#     /\p{^Ll}/.match("A") #=> #<MatchData "A">
+#
+# ## Anchors
+#
+# Anchors are metacharacter that match the zero-width positions between
+# characters, *anchoring* the match to a specific position.
+#
+# *   `^` - Matches beginning of line
+# *   `$` - Matches end of line
+# *   `\A` - Matches beginning of string.
+# *   `\Z` - Matches end of string. If string ends with a newline, it matches
+#     just before newline
+# *   `\z` - Matches end of string
+# *   `\G` - Matches first matching position:
+#
+#     In methods like `String#gsub` and `String#scan`, it changes on each
+#     iteration. It initially matches the beginning of subject, and in each
+#     following iteration it matches where the last match finished.
+#
+#         "    a b c".gsub(/ /, '_')    #=> "____a_b_c"
+#         "    a b c".gsub(/\G /, '_')  #=> "____a b c"
+#
+#     In methods like `Regexp#match` and `String#match` that take an (optional)
+#     offset, it matches where the search begins.
+#
+#         "hello, world".match(/,/, 3)    #=> #<MatchData ",">
+#         "hello, world".match(/\G,/, 3)  #=> nil
+#
+# *   `\b` - Matches word boundaries when outside brackets; backspace (0x08)
+#     when inside brackets
+# *   `\B` - Matches non-word boundaries
+# *   `(?=`*pat*`)` - *Positive lookahead* assertion: ensures that the following
+#     characters match *pat*, but doesn't include those characters in the
+#     matched text
+# *   `(?!`*pat*`)` - *Negative lookahead* assertion: ensures that the following
+#     characters do not match *pat*, but doesn't include those characters in the
+#     matched text
+# *   `(?<=`*pat*`)` - *Positive lookbehind* assertion: ensures that the
+#     preceding characters match *pat*, but doesn't include those characters in
+#     the matched text
+# *   `(?<!`*pat*`)` - *Negative lookbehind* assertion: ensures that the
+#     preceding characters do not match *pat*, but doesn't include those
+#     characters in the matched text
+# *   `\K` - Uses an positive lookbehind of the content preceding `\K` in the
+#     regexp.  For example, the following two regexps are almost equivalent:
+#
+#         /ab\Kc/
+#         /(?<=ab)c/
+#
+#     As are the following two regexps:
+#
+#         /(a)\K(b)\Kc/
+#         /(?<=(?<=(a))(b))c/
+#
+#
+# If a pattern isn't anchored it can begin at any point in the string:
+#
+#     /real/.match("surrealist") #=> #<MatchData "real">
+#
+# Anchoring the pattern to the beginning of the string forces the match to start
+# there. 'real' doesn't occur at the beginning of the string, so now the match
+# fails:
+#
+#     /\Areal/.match("surrealist") #=> nil
+#
+# The match below fails because although 'Demand' contains 'and', the pattern
+# does not occur at a word boundary.
+#
+#     /\band/.match("Demand")
+#
+# Whereas in the following example 'and' has been anchored to a non-word
+# boundary so instead of matching the first 'and' it matches from the fourth
+# letter of 'demand' instead:
+#
+#     /\Band.+/.match("Supply and demand curve") #=> #<MatchData "and curve">
+#
+# The pattern below uses positive lookahead and positive lookbehind to match
+# text appearing in  tags without including the tags in the match:
+#
+#     /(?<=<b>)\w+(?=<\/b>)/.match("Fortune favours the <b>bold</b>")
+#         #=> #<MatchData "bold">
+#
+# ## Options
+#
+# The end delimiter for a regexp can be followed by one or more single-letter
+# options which control how the pattern can match.
+#
+# *   `/pat/i` - Ignore case
+# *   `/pat/m` - Treat a newline as a character matched by `.`
+# *   `/pat/x` - Ignore whitespace and comments in the pattern
+# *   `/pat/o` - Perform `#{}` interpolation only once
+#
+#
+# `i`, `m`, and `x` can also be applied on the subexpression level with the
+# `(?`*on*`-`*off*`)` construct, which enables options *on*, and disables
+# options *off* for the expression enclosed by the parentheses:
+#
+#     /a(?i:b)c/.match('aBc')   #=> #<MatchData "aBc">
+#     /a(?-i:b)c/i.match('ABC') #=> nil
+#
+# Additionally, these options can also be toggled for the remainder of the
+# pattern:
+#
+#     /a(?i)bc/.match('abC') #=> #<MatchData "abC">
+#
+# Options may also be used with `Regexp.new`:
+#
+#     Regexp.new("abc", Regexp::IGNORECASE)                     #=> /abc/i
+#     Regexp.new("abc", Regexp::MULTILINE)                      #=> /abc/m
+#     Regexp.new("abc # Comment", Regexp::EXTENDED)             #=> /abc # Comment/x
+#     Regexp.new("abc", Regexp::IGNORECASE | Regexp::MULTILINE) #=> /abc/mi
+#
+# ## Free-Spacing Mode and Comments
+#
+# As mentioned above, the `x` option enables *free-spacing* mode. Literal white
+# space inside the pattern is ignored, and the octothorpe (`#`) character
+# introduces a comment until the end of the line. This allows the components of
+# the pattern to be organized in a potentially more readable fashion.
+#
+# A contrived pattern to match a number with optional decimal places:
+#
+#     float_pat = /\A
+#         [[:digit:]]+ # 1 or more digits before the decimal point
+#         (\.          # Decimal point
+#             [[:digit:]]+ # 1 or more digits after the decimal point
+#         )? # The decimal point and following digits are optional
+#     \Z/x
+#     float_pat.match('3.14') #=> #<MatchData "3.14" 1:".14">
+#
+# There are a number of strategies for matching whitespace:
+#
+# *   Use a pattern such as `\s` or `\p{Space}`.
+# *   Use escaped whitespace such as `\ `, i.e. a space preceded by a backslash.
+# *   Use a character class such as `[ ]`.
+#
+#
+# Comments can be included in a non-`x` pattern with the `(?#`*comment*`)`
+# construct, where *comment* is arbitrary text ignored by the regexp engine.
+#
+# Comments in regexp literals cannot include unescaped terminator characters.
+#
+# ## Encoding
+#
+# Regular expressions are assumed to use the source encoding. This can be
+# overridden with one of the following modifiers.
+#
+# *   `/`*pat*`/u` - UTF-8
+# *   `/`*pat*`/e` - EUC-JP
+# *   `/`*pat*`/s` - Windows-31J
+# *   `/`*pat*`/n` - ASCII-8BIT
+#
+#
+# A regexp can be matched against a string when they either share an encoding,
+# or the regexp's encoding is *US-ASCII* and the string's encoding is
+# ASCII-compatible.
+#
+# If a match between incompatible encodings is attempted an
+# `Encoding::CompatibilityError` exception is raised.
+#
+# The `Regexp#fixed_encoding?` predicate indicates whether the regexp has a
+# *fixed* encoding, that is one incompatible with ASCII. A regexp's encoding can
+# be explicitly fixed by supplying `Regexp::FIXEDENCODING` as the second
+# argument of `Regexp.new`:
+#
+#     r = Regexp.new("a".force_encoding("iso-8859-1"),Regexp::FIXEDENCODING)
+#     r =~ "a\u3042"
+#        # raises Encoding::CompatibilityError: incompatible encoding regexp match
+#        #         (ISO-8859-1 regexp with UTF-8 string)
+#
+# ## Special global variables
+#
+# Pattern matching sets some global variables :
+# *   `$~` is equivalent to Regexp.last_match;
+# *   `$&` contains the complete matched text;
+# *   `$`` contains string before match;
+# *   `$'` contains string after match;
+# *   `$1`, `$2` and so on contain text matching first, second, etc capture
+#     group;
+# *   `$+` contains last capture group.
+#
+#
+# Example:
+#
+#     m = /s(\w{2}).*(c)/.match('haystack') #=> #<MatchData "stac" 1:"ta" 2:"c">
+#     $~                                    #=> #<MatchData "stac" 1:"ta" 2:"c">
+#     Regexp.last_match                     #=> #<MatchData "stac" 1:"ta" 2:"c">
+#
+#     $&      #=> "stac"
+#             # same as m[0]
+#     $`      #=> "hay"
+#             # same as m.pre_match
+#     $'      #=> "k"
+#             # same as m.post_match
+#     $1      #=> "ta"
+#             # same as m[1]
+#     $2      #=> "c"
+#             # same as m[2]
+#     $3      #=> nil
+#             # no third group in pattern
+#     $+      #=> "c"
+#             # same as m[-1]
+#
+# These global variables are thread-local and method-local variables.
+#
+# ## Performance
+#
+# Certain pathological combinations of constructs can lead to abysmally bad
+# performance.
+#
+# Consider a string of 25 *a*s, a *d*, 4 *a*s, and a *c*.
+#
+#     s = 'a' * 25 + 'd' + 'a' * 4 + 'c'
+#     #=> "aaaaaaaaaaaaaaaaaaaaaaaaadaaaac"
+#
+# The following patterns match instantly as you would expect:
+#
+#     /(b|a)/ =~ s #=> 0
+#     /(b|a+)/ =~ s #=> 0
+#     /(b|a+)*/ =~ s #=> 0
+#
+# However, the following pattern takes appreciably longer:
+#
+#     /(b|a+)*c/ =~ s #=> 26
+#
+# This happens because an atom in the regexp is quantified by both an immediate
+# `+` and an enclosing `*` with nothing to differentiate which is in control of
+# any particular character. The nondeterminism that results produces
+# super-linear performance. (Consult *Mastering Regular Expressions* (3rd ed.),
+# pp 222, by *Jeffery Friedl*, for an in-depth analysis). This particular case
+# can be fixed by use of atomic grouping, which prevents the unnecessary
+# backtracking:
+#
+#     (start = Time.now) && /(b|a+)*c/ =~ s && (Time.now - start)
+#        #=> 24.702736882
+#     (start = Time.now) && /(?>b|a+)*c/ =~ s && (Time.now - start)
+#        #=> 0.000166571
+#
+# A similar case is typified by the following example, which takes approximately
+# 60 seconds to execute for me:
+#
+# Match a string of 29 *a*s against a pattern of 29 optional *a*s followed by 29
+# mandatory *a*s:
+#
+#     Regexp.new('a?' * 29 + 'a' * 29) =~ 'a' * 29
+#
+# The 29 optional *a*s match the string, but this prevents the 29 mandatory *a*s
+# that follow from matching. Ruby must then backtrack repeatedly so as to
+# satisfy as many of the optional matches as it can while still matching the
+# mandatory 29. It is plain to us that none of the optional matches can succeed,
+# but this fact unfortunately eludes Ruby.
+#
+# The best way to improve performance is to significantly reduce the amount of
+# backtracking needed.  For this case, instead of individually matching 29
+# optional *a*s, a range of optional *a*s can be matched all at once with
+# *a{0,29}*:
+#
+#     Regexp.new('a{0,29}' + 'a' * 29) =~ 'a' * 29
+#
+class Regexp
+  # <!--
+  #   rdoc-file=re.c
+  #   - Regexp.new(string, [options])       -> regexp
+  #   - Regexp.new(regexp)                  -> regexp
+  #   - Regexp.compile(string, [options])   -> regexp
+  #   - Regexp.compile(regexp)              -> regexp
+  # -->
+  # Constructs a new regular expression from `pattern`, which can be either a
+  # String or a Regexp (in which case that regexp's options are propagated), and
+  # new options may not be specified (a change as of Ruby 1.8).
+  #
+  # If `options` is an Integer, it should be one or more of the constants
+  # Regexp::EXTENDED, Regexp::IGNORECASE, and Regexp::MULTILINE, *or*-ed together.
+  #  Otherwise, if `options` is not `nil` or `false`, the regexp will be case
+  # insensitive.
+  #
+  #     r1 = Regexp.new('^a-z+:\\s+\w+') #=> /^a-z+:\s+\w+/
+  #     r2 = Regexp.new('cat', true)     #=> /cat/i
+  #     r3 = Regexp.new(r2)              #=> /cat/i
+  #     r4 = Regexp.new('dog', Regexp::EXTENDED | Regexp::IGNORECASE) #=> /dog/ix
+  #
+  def initialize: (String string, ?Integer | nil | false | top options, ?String kcode) -> Object
+                | (Regexp regexp) -> void
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - compile(*args)
+  # -->
+  # Alias for Regexp.new
+  #
+  alias self.compile self.new
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - Regexp.escape(str)   -> string
+  #   - Regexp.quote(str)    -> string
+  # -->
+  # Escapes any characters that would have special meaning in a regular
+  # expression. Returns a new escaped string with the same or compatible encoding.
+  # For any string, `Regexp.new(Regexp.escape(*str*))=~*str`* will be true.
+  #
+  #     Regexp.escape('\*?{}.')   #=> \\\*\?\{\}\.
+  #
+  def self.escape: (String | Symbol str) -> String
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - Regexp.last_match           -> matchdata
+  #   - Regexp.last_match(n)        -> str
+  # -->
+  # The first form returns the MatchData object generated by the last successful
+  # pattern match.  Equivalent to reading the special global variable `$~` (see
+  # Special global variables in Regexp for details).
+  #
+  # The second form returns the *n*th field in this MatchData object. *n* can be a
+  # string or symbol to reference a named capture.
+  #
+  # Note that the last_match is local to the thread and method scope of the method
+  # that did the pattern match.
+  #
+  #     /c(.)t/ =~ 'cat'        #=> 0
+  #     Regexp.last_match       #=> #<MatchData "cat" 1:"a">
+  #     Regexp.last_match(0)    #=> "cat"
+  #     Regexp.last_match(1)    #=> "a"
+  #     Regexp.last_match(2)    #=> nil
+  #
+  #     /(?<lhs>\w+)\s*=\s*(?<rhs>\w+)/ =~ "var = val"
+  #     Regexp.last_match       #=> #<MatchData "var = val" lhs:"var" rhs:"val">
+  #     Regexp.last_match(:lhs) #=> "var"
+  #     Regexp.last_match(:rhs) #=> "val"
+  #
+  def self.last_match: () -> MatchData?
+                     | (Integer n) -> String?
+                     | (Symbol | String n) -> String?
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - Regexp.escape(str)   -> string
+  #   - Regexp.quote(str)    -> string
+  # -->
+  # Escapes any characters that would have special meaning in a regular
+  # expression. Returns a new escaped string with the same or compatible encoding.
+  # For any string, `Regexp.new(Regexp.escape(*str*))=~*str`* will be true.
+  #
+  #     Regexp.escape('\*?{}.')   #=> \\\*\?\{\}\.
+  #
+  def self.quote: (String | Symbol str) -> String
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - Regexp.try_convert(obj) -> re or nil
+  # -->
+  # Try to convert *obj* into a Regexp, using to_regexp method. Returns converted
+  # regexp or nil if *obj* cannot be converted for any reason.
+  #
+  #     Regexp.try_convert(/re/)         #=> /re/
+  #     Regexp.try_convert("re")         #=> nil
+  #
+  #     o = Object.new
+  #     Regexp.try_convert(o)            #=> nil
+  #     def o.to_regexp() /foo/ end
+  #     Regexp.try_convert(o)            #=> /foo/
+  #
+  def self.try_convert: (untyped obj) -> Regexp?
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - Regexp.union(pat1, pat2, ...)            -> new_regexp
+  #   - Regexp.union(pats_ary)                   -> new_regexp
+  # -->
+  # Return a Regexp object that is the union of the given *pattern*s, i.e., will
+  # match any of its parts. The *pattern*s can be Regexp objects, in which case
+  # their options will be preserved, or Strings. If no patterns are given, returns
+  # `/(?!)/`.  The behavior is unspecified if any given *pattern* contains
+  # capture.
+  #
+  #     Regexp.union                         #=> /(?!)/
+  #     Regexp.union("penzance")             #=> /penzance/
+  #     Regexp.union("a+b*c")                #=> /a\+b\*c/
+  #     Regexp.union("skiing", "sledding")   #=> /skiing|sledding/
+  #     Regexp.union(["skiing", "sledding"]) #=> /skiing|sledding/
+  #     Regexp.union(/dogs/, /cats/i)        #=> /(?-mix:dogs)|(?i-mx:cats)/
+  #
+  # Note: the arguments for ::union will try to be converted into a regular
+  # expression literal via #to_regexp.
+  #
+  def self.union: () -> Regexp
+                | (String | Regexp pat1, *String | Regexp pat2) -> Regexp
+                | (::Array[String | Regexp]) -> Regexp
+
+  public
+
+  # <!-- rdoc-file=re.c -->
+  # Equality---Two regexps are equal if their patterns are identical, they have
+  # the same character set code, and their `casefold?` values are the same.
+  #
+  #     /abc/  == /abc/x   #=> false
+  #     /abc/  == /abc/i   #=> false
+  #     /abc/  == /abc/u   #=> false
+  #     /abc/u == /abc/n   #=> false
+  #
+  def ==: (untyped other) -> bool
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - rxp === str   -> true or false
+  # -->
+  # Case Equality---Used in case statements.
+  #
+  #     a = "HELLO"
+  #     case a
+  #     when /\A[a-z]*\z/; print "Lower case\n"
+  #     when /\A[A-Z]*\z/; print "Upper case\n"
+  #     else;              print "Mixed case\n"
+  #     end
+  #     #=> "Upper case"
+  #
+  # Following a regular expression literal with the #=== operator allows you to
+  # compare against a String.
+  #
+  #     /^[a-z]*$/ === "HELLO" #=> false
+  #     /^[A-Z]*$/ === "HELLO" #=> true
+  #
+  def ===: (untyped other) -> bool
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - rxp =~ str    -> integer or nil
+  # -->
+  # Match---Matches *rxp* against *str*.
+  #
+  #     /at/ =~ "input data"   #=> 7
+  #     /ax/ =~ "input data"   #=> nil
+  #
+  # If `=~` is used with a regexp literal with named captures, captured strings
+  # (or nil) is assigned to local variables named by the capture names.
+  #
+  #     /(?<lhs>\w+)\s*=\s*(?<rhs>\w+)/ =~ "  x = y  "
+  #     p lhs    #=> "x"
+  #     p rhs    #=> "y"
+  #
+  # If it is not matched, nil is assigned for the variables.
+  #
+  #     /(?<lhs>\w+)\s*=\s*(?<rhs>\w+)/ =~ "  x = "
+  #     p lhs    #=> nil
+  #     p rhs    #=> nil
+  #
+  # This assignment is implemented in the Ruby parser. The parser detects
+  # 'regexp-literal =~ expression' for the assignment. The regexp must be a
+  # literal without interpolation and placed at left hand side.
+  #
+  # The assignment does not occur if the regexp is not a literal.
+  #
+  #     re = /(?<lhs>\w+)\s*=\s*(?<rhs>\w+)/
+  #     re =~ "  x = y  "
+  #     p lhs    # undefined local variable
+  #     p rhs    # undefined local variable
+  #
+  # A regexp interpolation, `#{}`, also disables the assignment.
+  #
+  #     rhs_pat = /(?<rhs>\w+)/
+  #     /(?<lhs>\w+)\s*=\s*#{rhs_pat}/ =~ "x = y"
+  #     p lhs    # undefined local variable
+  #
+  # The assignment does not occur if the regexp is placed at the right hand side.
+  #
+  #     "  x = y  " =~ /(?<lhs>\w+)\s*=\s*(?<rhs>\w+)/
+  #     p lhs, rhs # undefined local variable
+  #
+  def =~: (String? str) -> Integer?
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - rxp.casefold?   -> true or false
+  # -->
+  # Returns the value of the case-insensitive flag.
+  #
+  #     /a/.casefold?           #=> false
+  #     /a/i.casefold?          #=> true
+  #     /(?i:a)/.casefold?      #=> false
+  #
+  def casefold?: () -> bool
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - obj.encoding   -> encoding
+  # -->
+  # Returns the Encoding object that represents the encoding of obj.
+  #
+  def encoding: () -> Encoding
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - rxp == other_rxp      -> true or false
+  #   - rxp.eql?(other_rxp)   -> true or false
+  # -->
+  # Equality---Two regexps are equal if their patterns are identical, they have
+  # the same character set code, and their `casefold?` values are the same.
+  #
+  #     /abc/  == /abc/x   #=> false
+  #     /abc/  == /abc/i   #=> false
+  #     /abc/  == /abc/u   #=> false
+  #     /abc/u == /abc/n   #=> false
+  #
+  def eql?: (untyped other) -> bool
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - rxp.fixed_encoding?   -> true or false
+  # -->
+  # Returns false if rxp is applicable to a string with any ASCII compatible
+  # encoding. Returns true otherwise.
+  #
+  #     r = /a/
+  #     r.fixed_encoding?                               #=> false
+  #     r =~ "\u{6666} a"                               #=> 2
+  #     r =~ "\xa1\xa2 a".force_encoding("euc-jp")      #=> 2
+  #     r =~ "abc".force_encoding("euc-jp")             #=> 0
+  #
+  #     r = /a/u
+  #     r.fixed_encoding?                               #=> true
+  #     r.encoding                                      #=> #<Encoding:UTF-8>
+  #     r =~ "\u{6666} a"                               #=> 2
+  #     r =~ "\xa1\xa2".force_encoding("euc-jp")        #=> Encoding::CompatibilityError
+  #     r =~ "abc".force_encoding("euc-jp")             #=> 0
+  #
+  #     r = /\u{6666}/
+  #     r.fixed_encoding?                               #=> true
+  #     r.encoding                                      #=> #<Encoding:UTF-8>
+  #     r =~ "\u{6666} a"                               #=> 0
+  #     r =~ "\xa1\xa2".force_encoding("euc-jp")        #=> Encoding::CompatibilityError
+  #     r =~ "abc".force_encoding("euc-jp")             #=> nil
+  #
+  def fixed_encoding?: () -> bool
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - rxp.hash   -> integer
+  # -->
+  # Produce a hash based on the text and options of this regular expression.
+  #
+  # See also Object#hash.
+  #
+  def hash: () -> Integer
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - rxp.inspect   -> string
+  # -->
+  # Produce a nicely formatted string-version of *rxp*. Perhaps surprisingly,
+  # `#inspect` actually produces the more natural version of the string than
+  # `#to_s`.
+  #
+  #     /ab+c/ix.inspect        #=> "/ab+c/ix"
+  #
+  def inspect: () -> String
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - rxp.match(str, pos=0)                   -> matchdata or nil
+  #   - rxp.match(str, pos=0) {|match| block }  -> obj
+  # -->
+  # Returns a MatchData object describing the match, or `nil` if there was no
+  # match. This is equivalent to retrieving the value of the special variable `$~`
+  # following a normal match.  If the second parameter is present, it specifies
+  # the position in the string to begin the search.
+  #
+  #     /(.)(.)(.)/.match("abc")[2]   #=> "b"
+  #     /(.)(.)/.match("abc", 1)[2]   #=> "c"
+  #
+  # If a block is given, invoke the block with MatchData if match succeed, so that
+  # you can write
+  #
+  #     /M(.*)/.match("Matz") do |m|
+  #       puts m[0]
+  #       puts m[1]
+  #     end
+  #
+  # instead of
+  #
+  #     if m = /M(.*)/.match("Matz")
+  #       puts m[0]
+  #       puts m[1]
+  #     end
+  #
+  # The return value is a value from block execution in this case.
+  #
+  def match: (String? | Symbol | _ToStr str, ?Integer pos) -> MatchData?
+           | [T] (String? | Symbol | _ToStr str, ?Integer pos) { (MatchData) -> T } -> T?
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - rxp.match?(str)          -> true or false
+  #   - rxp.match?(str, pos=0)   -> true or false
+  # -->
+  # Returns `true` or `false` to indicate whether the regexp is matched or not
+  # without updating $~ and other related variables. If the second parameter is
+  # present, it specifies the position in the string to begin the search.
+  #
+  #     /R.../.match?("Ruby")    #=> true
+  #     /R.../.match?("Ruby", 1) #=> false
+  #     /P.../.match?("Ruby")    #=> false
+  #     $&                       #=> nil
+  #
+  def match?: (String? | Symbol | _ToStr str, ?Integer pos) -> bool
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - rxp.named_captures  -> hash
+  # -->
+  # Returns a hash representing information about named captures of *rxp*.
+  #
+  # A key of the hash is a name of the named captures. A value of the hash is an
+  # array which is list of indexes of corresponding named captures.
+  #
+  #     /(?<foo>.)(?<bar>.)/.named_captures
+  #     #=> {"foo"=>[1], "bar"=>[2]}
+  #
+  #     /(?<foo>.)(?<foo>.)/.named_captures
+  #     #=> {"foo"=>[1, 2]}
+  #
+  # If there are no named captures, an empty hash is returned.
+  #
+  #     /(.)(.)/.named_captures
+  #     #=> {}
+  #
+  def named_captures: () -> ::Hash[String, ::Array[Integer]]
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - rxp.names   -> [name1, name2, ...]
+  # -->
+  # Returns a list of names of captures as an array of strings.
+  #
+  #     /(?<foo>.)(?<bar>.)(?<baz>.)/.names
+  #     #=> ["foo", "bar", "baz"]
+  #
+  #     /(?<foo>.)(?<foo>.)/.names
+  #     #=> ["foo"]
+  #
+  #     /(.)(.)/.names
+  #     #=> []
+  #
+  def names: () -> ::Array[String]
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - rxp.options   -> integer
+  # -->
+  # Returns the set of bits corresponding to the options used when creating this
+  # Regexp (see Regexp::new for details. Note that additional bits may be set in
+  # the returned options: these are used internally by the regular expression
+  # code. These extra bits are ignored if the options are passed to Regexp::new.
+  #
+  #     Regexp::IGNORECASE                  #=> 1
+  #     Regexp::EXTENDED                    #=> 2
+  #     Regexp::MULTILINE                   #=> 4
+  #
+  #     /cat/.options                       #=> 0
+  #     /cat/ix.options                     #=> 3
+  #     Regexp.new('cat', true).options     #=> 1
+  #     /\xa1\xa2/e.options                 #=> 16
+  #
+  #     r = /cat/ix
+  #     Regexp.new(r.source, r.options)     #=> /cat/ix
+  #
+  def options: () -> Integer
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - rxp.source   -> str
+  # -->
+  # Returns the original string of the pattern.
+  #
+  #     /ab+c/ix.source #=> "ab+c"
+  #
+  # Note that escape sequences are retained as is.
+  #
+  #     /\x20\+/.source  #=> "\\x20\\+"
+  #
+  def source: () -> String
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - rxp.to_s   -> str
+  # -->
+  # Returns a string containing the regular expression and its options (using the
+  # `(?opts:source)` notation. This string can be fed back in to Regexp::new to a
+  # regular expression with the same semantics as the original. (However,
+  # `Regexp#==` may not return true when comparing the two, as the source of the
+  # regular expression itself may differ, as the example shows).  Regexp#inspect
+  # produces a generally more readable version of *rxp*.
+  #
+  #     r1 = /ab+c/ix           #=> /ab+c/ix
+  #     s1 = r1.to_s            #=> "(?ix-m:ab+c)"
+  #     r2 = Regexp.new(s1)     #=> /(?ix-m:ab+c)/
+  #     r1 == r2                #=> false
+  #     r1.source               #=> "ab+c"
+  #     r2.source               #=> "(?ix-m:ab+c)"
+  #
+  def to_s: () -> String
+
+  # <!--
+  #   rdoc-file=re.c
+  #   - ~ rxp   -> integer or nil
+  # -->
+  # Match---Matches *rxp* against the contents of `$_`. Equivalent to *`rxp* =~
+  # $_`.
+  #
+  #     $_ = "input data"
+  #     ~ /at/   #=> 7
+  #
+  def ~: () -> Integer?
+
+  private
+
+  def initialize_copy: (self object) -> self
+end
+
+# <!-- rdoc-file=re.c -->
+# see Regexp.options and Regexp.new
+#
+Regexp::EXTENDED: Integer
+
+# <!-- rdoc-file=re.c -->
+# see Regexp.options and Regexp.new
+#
+Regexp::FIXEDENCODING: Integer
+
+# <!-- rdoc-file=re.c -->
+# see Regexp.options and Regexp.new
+#
+Regexp::IGNORECASE: Integer
+
+# <!-- rdoc-file=re.c -->
+# see Regexp.options and Regexp.new
+#
+Regexp::MULTILINE: Integer
+
+# <!-- rdoc-file=re.c -->
+# see Regexp.options and Regexp.new
+#
+Regexp::NOENCODING: Integer