ffi 1.0.0 → 1.17.1

data/ext/ffi_c/libffi/src/mips/o32.S

@@ -50,14 +50,14 @@ ffi_call_O32:
 $LFB0:
 	# Prologue
 	SUBU	$sp, SIZEOF_FRAME	# Frame size
-$LCFI0:
+$LCFI00:
 	REG_S	$fp, FP_OFF($sp)	# Save frame pointer
-$LCFI1:
+$LCFI01:
 	REG_S	ra, RA_OFF($sp)		# Save return address
-$LCFI2:
+$LCFI02:
 	move	$fp, $sp
 
-$LCFI3:
+$LCFI03:
 	move	t9, callback		# callback function pointer
 	REG_S	flags, A3_OFF($fp)	# flags
 
@@ -82,13 +82,16 @@ sixteen:
 		
 	ADDU	$sp, 4 * FFI_SIZEOF_ARG		# adjust $sp to new args
 
+#ifndef __mips_soft_float
 	bnez	t0, pass_d			# make it quick for int
+#endif
 	REG_L	a0, 0*FFI_SIZEOF_ARG($sp)	# just go ahead and load the
 	REG_L	a1, 1*FFI_SIZEOF_ARG($sp)	# four regs.
 	REG_L	a2, 2*FFI_SIZEOF_ARG($sp)
 	REG_L	a3, 3*FFI_SIZEOF_ARG($sp)
 	b	call_it
 
+#ifndef __mips_soft_float
 pass_d:
 	bne	t0, FFI_ARGS_D, pass_f
 	l.d	$f12, 0*FFI_SIZEOF_ARG($sp)	# load $fp regs from args
@@ -131,7 +134,12 @@ pass_f_d:
 	l.s	$f12, 0*FFI_SIZEOF_ARG($sp)	# load $fp regs from args
 	l.d	$f14, 2*FFI_SIZEOF_ARG($sp)	# passing double and float
 
+#endif
+
 call_it:	
+	# Load the static chain pointer
+	REG_L	t7, SIZEOF_FRAME + 6*FFI_SIZEOF_ARG($fp)
+
 	# Load the function pointer
 	REG_L	t9, SIZEOF_FRAME + 5*FFI_SIZEOF_ARG($fp)
 
@@ -139,7 +147,8 @@ call_it:
 	REG_L	t1, SIZEOF_FRAME + 4*FFI_SIZEOF_ARG($fp)
 	beqz	t1, noretval
 
-	bne     t2, FFI_TYPE_INT, retlonglong
+	and     t1, t2, ((1<<4)-1)
+	bne     t1, FFI_TYPE_INT, retlonglong
 	jalr	t9
 	REG_L	t0, SIZEOF_FRAME + 4*FFI_SIZEOF_ARG($fp)
 	REG_S	v0, 0(t0)
@@ -147,7 +156,7 @@ call_it:
 
 retlonglong:
 	# Really any 64-bit int, signed or not.
-	bne	t2, FFI_TYPE_UINT64, retfloat
+	bne	t1, FFI_TYPE_UINT64, retfloat
 	jalr	t9
 	REG_L	t0, SIZEOF_FRAME + 4*FFI_SIZEOF_ARG($fp)
 	REG_S	v1, 4(t0)
@@ -155,19 +164,70 @@ retlonglong:
 	b	epilogue
 
 retfloat:
-	bne     t2, FFI_TYPE_FLOAT, retdouble
+	bne     t1, FFI_TYPE_FLOAT, retdouble
 	jalr	t9
 	REG_L	t0, SIZEOF_FRAME + 4*FFI_SIZEOF_ARG($fp)
+#ifndef __mips_soft_float
 	s.s	$f0, 0(t0)
+#else
+	REG_S	v0, 0(t0)
+#endif
 	b	epilogue
 
 retdouble:	
-	bne	t2, FFI_TYPE_DOUBLE, noretval
+	bne	t1, FFI_TYPE_DOUBLE, retcomplex
 	jalr	t9
 	REG_L	t0, SIZEOF_FRAME + 4*FFI_SIZEOF_ARG($fp)
+#ifndef __mips_soft_float
 	s.d	$f0, 0(t0)
+#else
+	REG_S	v1, 4(t0)
+	REG_S	v0, 0(t0)
+#endif
 	b	epilogue
 	
+retcomplex:
+	# mask out the complex elements type.
+	# the struct of flags (bits):
+	# 0-1: arg0
+	# 2-3: arg1
+	# 4-7: return type
+	# 8-11: rtype elements type: for complex
+	# Note here: t2 is flags>>4
+	bne	t1, FFI_TYPE_COMPLEX, noretval
+	jalr	t9
+	REG_L	t0, SIZEOF_FRAME + 4*FFI_SIZEOF_ARG($fp)
+	REG_L	t1, A3_OFF($fp)		# load the flags word
+	SRL	t1, t1, 8
+	li	t3, 3
+	beq	t1, t3, 3f # double
+	li	t3, 2
+	beq	t1, t3, 2f # float
+	# FIXME: long double
+	slti	t3, t1, 5
+	beqz	t3, 5f     # (u)int8/16/32/64
+2:
+#ifndef __mips_soft_float
+	s.s	$f0, 0(t0)
+	s.s	$f2, 4(t0)
+#else
+	# FIXME: do nothing can pass all of the testsuite
+#endif
+	b	epilogue
+3:
+#ifndef __mips_soft_float
+	s.d	$f0, 0(t0)
+	s.d	$f2, 8(t0)
+#else
+	# FIXME: do nothing can pass all of the testsuite
+#endif
+	b	epilogue
+
+5:
+	REG_S	v1, 4(t0)
+	REG_S	v0, 0(t0)
+	b	epilogue
+
 noretval:	
 	jalr	t9
 	
@@ -204,13 +264,15 @@ $LFE0:
 	-8 - f14 (le low, be high)
 	-9 - f12 (le high, be low)
        -10 - f12 (le low, be high)
-       -11 - Called function a3 save
-       -12 - Called function a2 save
-       -13 - Called function a1 save
-       -14 - Called function a0 save, our sp and fp point here
+       -11 - Called function a5 save
+       -12 - Called function a4 save
+       -13 - Called function a3 save
+       -14 - Called function a2 save
+       -15 - Called function a1 save
+       -16 - Called function a0 save, our sp and fp point here
 	 */
 	
-#define SIZEOF_FRAME2	(14 * FFI_SIZEOF_ARG)
+#define SIZEOF_FRAME2	(16 * FFI_SIZEOF_ARG)
 #define A3_OFF2		(SIZEOF_FRAME2 + 3 * FFI_SIZEOF_ARG)
 #define A2_OFF2		(SIZEOF_FRAME2 + 2 * FFI_SIZEOF_ARG)
 #define A1_OFF2		(SIZEOF_FRAME2 + 1 * FFI_SIZEOF_ARG)
@@ -225,13 +287,73 @@ $LFE0:
 #define FA_1_0_OFF2	(SIZEOF_FRAME2 - 8 * FFI_SIZEOF_ARG)
 #define FA_0_1_OFF2	(SIZEOF_FRAME2 - 9 * FFI_SIZEOF_ARG)
 #define FA_0_0_OFF2	(SIZEOF_FRAME2 - 10 * FFI_SIZEOF_ARG)
+#define CALLED_A5_OFF2  (SIZEOF_FRAME2 - 11 * FFI_SIZEOF_ARG)
+#define CALLED_A4_OFF2  (SIZEOF_FRAME2 - 12 * FFI_SIZEOF_ARG)
 
 	.text
+
+	.align	2
+	.globl	ffi_go_closure_O32
+	.ent	ffi_go_closure_O32
+ffi_go_closure_O32:
+$LFB1:
+	# Prologue
+	.frame	$fp, SIZEOF_FRAME2, ra
+	.set	noreorder
+	.cpload	t9
+	.set	reorder
+	SUBU	$sp, SIZEOF_FRAME2
+	.cprestore GP_OFF2
+$LCFI10:
+
+	REG_S	$16, S0_OFF2($sp)	 # Save s0
+	REG_S	$fp, FP_OFF2($sp)	 # Save frame pointer
+	REG_S	ra, RA_OFF2($sp)	 # Save return address
+$LCFI11:
+
+	move	$fp, $sp
+$LCFI12:
+
+	REG_S	a0, A0_OFF2($fp)
+	REG_S	a1, A1_OFF2($fp)
+	REG_S	a2, A2_OFF2($fp)
+	REG_S	a3, A3_OFF2($fp)
+
+	# Load ABI enum to s0
+	REG_L	$16, 4($15)	# cif 
+	REG_L	$16, 0($16)	# abi is first member.
+
+	li	$13, 1		# FFI_O32
+	bne	$16, $13, 1f	# Skip fp save if FFI_O32_SOFT_FLOAT
+	
+#ifndef __mips_soft_float
+	# Store all possible float/double registers.
+	s.d	$f12, FA_0_0_OFF2($fp)
+	s.d	$f14, FA_1_0_OFF2($fp)
+#endif
+1:
+	# prepare arguments for ffi_closure_mips_inner_O32
+	REG_L	a0, 4($15)	 # cif 
+	REG_L	a1, 8($15)	 # fun
+	move	a2, $15		 # user_data = go closure
+	addu	a3, $fp, V0_OFF2 # rvalue
+
+	addu	t9, $fp, A0_OFF2 # ar
+	REG_S   t9, CALLED_A4_OFF2($fp)
+
+	addu	t9, $fp, FA_0_0_OFF2 #fpr
+	REG_S   t9, CALLED_A5_OFF2($fp)
+
+	b $do_closure
+
+$LFE1:
+	.end ffi_go_closure_O32
+
 	.align	2
 	.globl	ffi_closure_O32
 	.ent	ffi_closure_O32
 ffi_closure_O32:
-$LFB1:
+$LFB2:
 	# Prologue
 	.frame	$fp, SIZEOF_FRAME2, ra
 	.set	noreorder
@@ -239,14 +361,14 @@ $LFB1:
 	.set	reorder
 	SUBU	$sp, SIZEOF_FRAME2
 	.cprestore GP_OFF2
-$LCFI4:
+$LCFI20:
 	REG_S	$16, S0_OFF2($sp)	 # Save s0
 	REG_S	$fp, FP_OFF2($sp)	 # Save frame pointer
 	REG_S	ra, RA_OFF2($sp)	 # Save return address
-$LCFI6:
+$LCFI21:
 	move	$fp, $sp
 
-$LCFI7:
+$LCFI22:
 	# Store all possible argument registers. If there are more than
 	# four arguments, then they are stored above where we put a3.
 	REG_S	a0, A0_OFF2($fp)
@@ -261,16 +383,27 @@ $LCFI7:
 	li	$13, 1		# FFI_O32
 	bne	$16, $13, 1f	# Skip fp save if FFI_O32_SOFT_FLOAT
 	
+#ifndef __mips_soft_float
 	# Store all possible float/double registers.
 	s.d	$f12, FA_0_0_OFF2($fp)
 	s.d	$f14, FA_1_0_OFF2($fp)
+#endif
 1:	
-	# Call ffi_closure_mips_inner_O32 to do the work.
+	# prepare arguments for ffi_closure_mips_inner_O32
+	REG_L	a0, 20($12)	 # cif pointer follows tramp.
+	REG_L	a1, 24($12)	 # fun
+	REG_L	a2, 28($12)	 # user_data
+	addu	a3, $fp, V0_OFF2 # rvalue
+
+	addu	t9, $fp, A0_OFF2 # ar
+	REG_S   t9, CALLED_A4_OFF2($fp)
+
+	addu	t9, $fp, FA_0_0_OFF2 #fpr
+	REG_S   t9, CALLED_A5_OFF2($fp)
+
+$do_closure:
 	la	t9, ffi_closure_mips_inner_O32
-	move	a0, $12	 # Pointer to the ffi_closure
-	addu	a1, $fp, V0_OFF2
-	addu	a2, $fp, A0_OFF2
-	addu	a3, $fp, FA_0_0_OFF2
+	# Call ffi_closure_mips_inner_O32 to do the work.
 	jalr	t9
 
 	# Load the return value into the appropriate register.
@@ -281,6 +414,7 @@ $LCFI7:
 	li	$13, 1		# FFI_O32
 	bne	$16, $13, 1f	# Skip fp restore if FFI_O32_SOFT_FLOAT
 
+#ifndef __mips_soft_float
 	li	$9, FFI_TYPE_FLOAT
 	l.s	$f0, V0_OFF2($fp)
 	beq	$8, $9, closure_done
@@ -288,6 +422,20 @@ $LCFI7:
 	li	$9, FFI_TYPE_DOUBLE
 	l.d	$f0, V0_OFF2($fp)
 	beq	$8, $9, closure_done
+
+	li      $9, FFI_TYPE_COMPLEX
+	bne     $8, $9, 1f
+
+	li      $9, 8
+	l.s	$f0, V0_OFF2($fp)
+	l.s	$f2, V1_OFF2($fp)
+	beq     $3, $9, closure_done
+
+	li      $9, 16
+	l.d	$f0, V0_OFF2($fp)
+	l.d	$f2, (V0_OFF2+8)($fp)
+	beq     $3, $9, closure_done
+#endif
 1:	
 	REG_L	$3, V1_OFF2($fp)
 	REG_L	$2, V0_OFF2($fp)
@@ -300,7 +448,7 @@ closure_done:
 	REG_L	ra,  RA_OFF2($sp)	 # Restore return address
 	ADDU	$sp, SIZEOF_FRAME2
 	j	ra
-$LFE1:
+$LFE2:
 	.end	ffi_closure_O32
 
 /* DWARF-2 unwind info. */
@@ -322,6 +470,7 @@ $LSCIE0:
 	.uleb128 0x0
 	.align	2
 $LECIE0:
+
 $LSFDE0:
 	.4byte	$LEFDE0-$LASFDE0	 # FDE Length
 $LASFDE0:
@@ -330,11 +479,11 @@ $LASFDE0:
 	.4byte	$LFE0-$LFB0	 # FDE address range
 	.uleb128 0x0	 # Augmentation size
 	.byte	0x4	 # DW_CFA_advance_loc4
-	.4byte	$LCFI0-$LFB0
+	.4byte	$LCFI00-$LFB0
 	.byte	0xe	 # DW_CFA_def_cfa_offset
 	.uleb128 0x18
 	.byte	0x4	 # DW_CFA_advance_loc4
-	.4byte	$LCFI2-$LCFI0
+	.4byte	$LCFI01-$LCFI00
 	.byte	0x11	 # DW_CFA_offset_extended_sf
 	.uleb128 0x1e	 # $fp
 	.sleb128 -2	 # SIZEOF_FRAME2 - 2*FFI_SIZEOF_ARG($sp)
@@ -342,12 +491,13 @@ $LASFDE0:
 	.uleb128 0x1f	 # $ra
 	.sleb128 -1	 # SIZEOF_FRAME2 - 1*FFI_SIZEOF_ARG($sp)
 	.byte	0x4	 # DW_CFA_advance_loc4
-	.4byte	$LCFI3-$LCFI2
+	.4byte	$LCFI02-$LCFI01
 	.byte	0xc	 # DW_CFA_def_cfa
 	.uleb128 0x1e
 	.uleb128 0x18
 	.align	2
 $LEFDE0:
+
 $LSFDE1:
 	.4byte	$LEFDE1-$LASFDE1	 # FDE Length
 $LASFDE1:
@@ -356,11 +506,11 @@ $LASFDE1:
 	.4byte	$LFE1-$LFB1	 # FDE address range
 	.uleb128 0x0	 # Augmentation size
 	.byte	0x4	 # DW_CFA_advance_loc4
-	.4byte	$LCFI4-$LFB1
+	.4byte	$LCFI10-$LFB1
 	.byte	0xe	 # DW_CFA_def_cfa_offset
-	.uleb128 0x38
+	.uleb128 SIZEOF_FRAME2
 	.byte	0x4	 # DW_CFA_advance_loc4
-	.4byte	$LCFI6-$LCFI4
+	.4byte	$LCFI11-$LCFI10
 	.byte	0x11	 # DW_CFA_offset_extended_sf
 	.uleb128 0x10	 # $16
 	.sleb128 -3	 # SIZEOF_FRAME2 - 3*FFI_SIZEOF_ARG($sp)
@@ -371,11 +521,41 @@ $LASFDE1:
 	.uleb128 0x1f	 # $ra
 	.sleb128 -1	 # SIZEOF_FRAME2 - 1*FFI_SIZEOF_ARG($sp)
 	.byte	0x4	 # DW_CFA_advance_loc4
-	.4byte	$LCFI7-$LCFI6
+	.4byte	$LCFI12-$LCFI11
 	.byte	0xc	 # DW_CFA_def_cfa
 	.uleb128 0x1e
-	.uleb128 0x38
+	.uleb128 SIZEOF_FRAME2
 	.align	2
 $LEFDE1:
 
+$LSFDE2:
+	.4byte	$LEFDE2-$LASFDE2	 # FDE Length
+$LASFDE2:
+	.4byte	$LASFDE2-$Lframe0	 # FDE CIE offset
+	.4byte	$LFB2	 # FDE initial location
+	.4byte	$LFE2-$LFB2	 # FDE address range
+	.uleb128 0x0	 # Augmentation size
+	.byte	0x4	 # DW_CFA_advance_loc4
+	.4byte	$LCFI20-$LFB2
+	.byte	0xe	 # DW_CFA_def_cfa_offset
+	.uleb128 SIZEOF_FRAME2
+	.byte	0x4	 # DW_CFA_advance_loc4
+	.4byte	$LCFI21-$LCFI20
+	.byte	0x11	 # DW_CFA_offset_extended_sf
+	.uleb128 0x10	 # $16
+	.sleb128 -3	 # SIZEOF_FRAME2 - 3*FFI_SIZEOF_ARG($sp)
+	.byte	0x11	 # DW_CFA_offset_extended_sf
+	.uleb128 0x1e	 # $fp
+	.sleb128 -2	 # SIZEOF_FRAME2 - 2*FFI_SIZEOF_ARG($sp)
+	.byte	0x11	 # DW_CFA_offset_extended_sf
+	.uleb128 0x1f	 # $ra
+	.sleb128 -1	 # SIZEOF_FRAME2 - 1*FFI_SIZEOF_ARG($sp)
+	.byte	0x4	 # DW_CFA_advance_loc4
+	.4byte	$LCFI22-$LCFI21
+	.byte	0xc	 # DW_CFA_def_cfa
+	.uleb128 0x1e
+	.uleb128 SIZEOF_FRAME2
+	.align	2
+$LEFDE2:
+
 #endif

data/ext/ffi_c/libffi/src/moxie/eabi.S

@@ -0,0 +1,101 @@
+/* -----------------------------------------------------------------------
+   eabi.S - Copyright (c) 2012, 2013  Anthony Green
+   
+   Moxie Assembly glue.
+
+   Permission is hereby granted, free of charge, to any person obtaining
+   a copy of this software and associated documentation files (the
+   ``Software''), to deal in the Software without restriction, including
+   without limitation the rights to use, copy, modify, merge, publish,
+   distribute, sublicense, and/or sell copies of the Software, and to
+   permit persons to whom the Software is furnished to do so, subject to
+   the following conditions:
+
+   The above copyright notice and this permission notice shall be included
+   in all copies or substantial portions of the Software.
+
+   THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, EXPRESS
+   OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+   MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+   IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY CLAIM, DAMAGES OR
+   OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+   ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+   OTHER DEALINGS IN THE SOFTWARE.
+   ----------------------------------------------------------------------- */
+
+#define LIBFFI_ASM	
+#include <fficonfig.h>
+#include <ffi.h>
+
+	.globl ffi_prep_args_EABI
+
+	.text
+	.p2align 4
+	.globl ffi_call_EABI
+	.type ffi_call_EABI, @function
+
+	# $r0 :   ffi_prep_args
+	# $r1 :   &ecif
+	# $r2 :   cif->bytes
+	# $r3 :   fig->flags
+	# $r4 :   ecif.rvalue
+	# $r5 :   fn
+	
+ffi_call_EABI:
+	push	$sp, $r6
+	push	$sp, $r7
+	push	$sp, $r8
+	dec	$sp, 24
+
+	/* Store incoming args on stack.  */
+	sto.l	0($sp), $r0 /* ffi_prep_args */
+	sto.l	4($sp), $r1 /* ecif */
+	sto.l	8($sp), $r2 /* bytes */
+	sto.l	12($sp), $r3 /* flags */
+	sto.l	16($sp), $r4 /* &rvalue */
+	sto.l	20($sp), $r5 /* fn */
+	
+	/* Call ffi_prep_args.  */
+	mov 	$r6, $r4 /* Save result buffer */
+	mov	$r7, $r5 /* Save the target fn */
+	mov	$r8, $r3 /* Save the flags */
+	sub	$sp, $r2 /* Allocate stack space */
+	mov	$r0, $sp /* We can stomp over $r0 */
+	/* $r1 is already set up */
+	jsra 	ffi_prep_args
+
+	/* Load register arguments.  */
+	ldo.l	$r0, 0($sp)
+	ldo.l	$r1, 4($sp)
+	ldo.l	$r2, 8($sp)
+	ldo.l	$r3, 12($sp)
+	ldo.l	$r4, 16($sp)
+	ldo.l	$r5, 20($sp)
+	
+	/* Call the target function.  */
+	jsr	$r7
+
+	ldi.l	$r7, 0xffffffff
+	cmp	$r8, $r7
+	beq	retstruct
+
+	ldi.l	$r7, 4
+	cmp	$r8, $r7
+	bgt	ret2reg
+
+	st.l	($r6), $r0
+	jmpa	retdone
+
+ret2reg:	
+	st.l	($r6), $r0
+	sto.l	4($r6), $r1
+
+retstruct:
+retdone:	
+	/* Return.  */
+	ldo.l	$r6, -4($fp)
+	ldo.l	$r7, -8($fp)
+	ldo.l	$r8, -12($fp)
+	ret
+	.size ffi_call_EABI, .-ffi_call_EABI
+