etude_for_ruby 0.1.0 → 0.1.4

data/vendor/bundle/ruby/2.2.0/gems/yard-0.9.8/benchmarks/splat_vs_flatten.rb

@@ -0,0 +1,13 @@
+# frozen_string_literal: true
+require "benchmark"
+
+# To prove that flattening a small list is not significantly slower than
+# calling *list (used to get around create_tag list issue)
+$a = "FOO BAR BAZ"
+def foo(*args) args.last.inspect end
+
+TESTS = 10_000
+Benchmark.bmbm do |x|
+  x.report("splat") { TESTS.times { foo(*$a) } }
+  x.report("flatten") { TESTS.times { foo(*[$a].flatten) } }
+end

data/vendor/bundle/ruby/2.2.0/gems/yard-0.9.8/benchmarks/template_erb.rb

@@ -0,0 +1,23 @@
+# frozen_string_literal: true
+require "benchmark"
+require File.join(File.dirname(__FILE__), '..', 'lib', 'yard')
+
+YARD::Registry.load_yardoc(File.join(File.dirname(__FILE__), '..', '.yardoc'))
+obj = YARD::Registry.at("YARD::CodeObjects::Base")
+
+TIMES = 3
+Benchmark.bm do |x|
+  x.report("trim-line") { TIMES.times { obj.format(:format => :html) } }
+  module YARD
+    module Templates
+      module Template
+        def erb(section, &block)
+          erb = ERB.new(cache(section), nil)
+          erb.filename = cache_filename(section).to_s
+          erb.result(binding, &block)
+        end
+      end
+    end
+  end
+  x.report("no-trim  ") { TIMES.times { obj.format(:format => :html) } }
+end

data/vendor/bundle/ruby/2.2.0/gems/yard-0.9.8/benchmarks/template_format.rb

@@ -0,0 +1,7 @@
+# frozen_string_literal: true
+require "benchmark"
+require File.join(File.dirname(__FILE__), '..', 'lib', 'yard')
+
+YARD::Registry.load_yardoc(File.join(File.dirname(__FILE__), '..', '.yardoc'))
+obj = YARD::Registry.at("YARD::CodeObjects::Base")
+log.puts Benchmark.measure { obj.format(:format => :html) }

data/vendor/bundle/ruby/2.2.0/gems/yard-0.9.8/benchmarks/template_profile.rb

@@ -0,0 +1,18 @@
+# frozen_string_literal: true
+require 'rubygems'
+require 'ruby-prof'
+# require 'benchmark'
+require File.join(File.dirname(__FILE__), '..', 'lib', 'yard')
+
+YARD::Registry.load_yardoc(File.join(File.dirname(__FILE__), '..', '.yardoc'))
+obj = YARD::Registry.at("YARD::CodeObjects::Base")
+
+# PerfTools::CpuProfiler.start("template_profile") do
+# end
+
+result = RubyProf.profile do
+  obj.format(:format => :html, :no_highlight => true)
+end
+
+printer = RubyProf::CallTreePrinter.new(result)
+printer.print(STDOUT)

data/vendor/bundle/ruby/2.2.0/gems/yard-0.9.8/benchmarks/yri_cache.rb

@@ -0,0 +1,20 @@
+# frozen_string_literal: true
+require File.dirname(__FILE__) + "/../lib/yard"
+require "benchmark"
+include YARD::CLI
+
+class YARD::CLI::YRI
+  def print_object(object) end
+end
+
+def remove_cache
+  File.unlink(YRI::CACHE_FILE)
+end
+
+TIMES = 10
+NAME = 'YARD'
+remove_cache; YRI.run(NAME)
+Benchmark.bmbm do |x|
+  x.report("cache   ") { TIMES.times { YRI.run(NAME) } }
+  x.report("no-cache") { TIMES.times { remove_cache; YRI.run(NAME) } }
+end

data/vendor/bundle/ruby/2.2.0/gems/yard-0.9.8/bin/yard

@@ -0,0 +1,13 @@
+#!/usr/bin/env ruby
+# frozen_string_literal: true
+
+# We do all this work just to find the proper load path
+path = __FILE__
+while File.symlink?(path)
+  path = File.expand_path(File.readlink(path), File.dirname(path))
+end
+$LOAD_PATH.unshift(File.join(File.dirname(File.expand_path(path)), '..', 'lib'))
+
+require 'yard'
+
+YARD::CLI::CommandParser.run(*ARGV)

data/vendor/bundle/ruby/2.2.0/gems/yard-0.9.8/bin/yardoc

@@ -0,0 +1,13 @@
+#!/usr/bin/env ruby
+# frozen_string_literal: true
+
+# We do all this work just to find the proper load path
+path = __FILE__
+while File.symlink?(path)
+  path = File.expand_path(File.readlink(path), File.dirname(path))
+end
+$LOAD_PATH.unshift(File.join(File.dirname(File.expand_path(path)), '..', 'lib'))
+
+require 'yard'
+
+YARD::CLI::Yardoc.run(*ARGV)

data/vendor/bundle/ruby/2.2.0/gems/yard-0.9.8/bin/yri

@@ -0,0 +1,13 @@
+#!/usr/bin/env ruby
+# frozen_string_literal: true
+
+# We do all this work just to find the proper load path
+path = __FILE__
+while File.symlink?(path)
+  path = File.expand_path(File.readlink(path), File.dirname(path))
+end
+$LOAD_PATH.unshift(File.join(File.dirname(File.expand_path(path)), '..', 'lib'))
+
+require 'yard'
+
+YARD::CLI::YRI.run(*ARGV)

data/vendor/bundle/ruby/2.2.0/gems/yard-0.9.8/docs/CodeObjects.md

@@ -0,0 +1,115 @@
+# @title CodeObjects Architecture
+
+# CodeObjects Architecture
+
+Code objects are Ruby objects that describe the code being documented. For instance,
+all classes, modules, methods, etc. are all extracted from the Ruby source as code
+objects. All of these code objects extend from the {YARD::CodeObjects::Base} class, which
+provides basic attributes like source location, source code, name and path.
+
+## CodeObjects Organization
+
+Code objects are divided into two basic types. {YARD::CodeObjects::NamespaceObject NamespaceObjects}
+and non-namespace objects. A namespace object refers to any object in Ruby that can have
+other objects defined inside of it. In the context of Ruby, this specifically means
+modules and classes (both of which are subclasses of `NamespaceObject`). These objects
+act like tree structures, maintaining a list of all of their direct children. All non
+namespace objects are simply subclasses of the Base class. The {YARD::CodeObjects::RootObject RootObject}
+is a special kind of `NamespaceObject` which refers to the top level namespace in Ruby.
+Methods that accept a namespace object as a parameter should also accept the symbol
+`:root` as a shortcut for the root object.
+
+The following is an overview of the classes within the `CodeObjects` namespace:
+
+![CodeObjects Class Diagram](images/code-objects-class-diagram.png)
+
+## Unique Path Representation
+
+All CodeObjects are uniquely defined by their implementation of {YARD::CodeObjects::Base#path}.
+This path is used to locate or store a code object in the {YARD::Registry}. It is therefore
+essential that any Base subclass return a unique String value for #path so that the
+object may co-exist with other objects in the Registry.
+
+In practice, a path is simply the conventional Ruby representation of a class,
+module, constant, class variable or method. For example, the following objects
+would have the following respective paths:
+
+* Class `Klass` inside module `Mod`: `Mod::Klass`
+* Instance method `bar` inside class `Foo`: `Foo#bar`
+* Class method `bar` inside class `Foo`: `Foo.bar`
+* Constant `VERSION` inside class `YARD`: `YARD::VERSION`
+* Class variable `@@abc` inside class `A`: `A::@@abc`
+
+## Registry
+
+CodeObjects classes are coupled with the {YARD::Registry} class which keeps track of
+all instantiated code objects. This is an explicit design choice to allow objects
+to be fetched, cached, imported and exported from a centralized location. As mentioned
+above, this coupling is a result of the fact that each object is uniquely identified by
+its path, which is used to implement lookups. You can read more about the registry
+in the {YARD::Registry} class.
+
+## Identity Map
+
+Code objects are instantiated using an identity-map like implementation that guarantees
+only one unique Ruby object exists for an object described by a specific path. This
+allows developers to create a code object without checking if it already exists in
+the {YARD::Registry}. The following example will only create one object:
+
+    id = ClassObject.new(:root, "MyClass").object_id #=> 13352
+    ClassObject.new(:root, "MyClass").object_id #=> 13352
+
+## Proxy Objects
+
+In addition to providing access to existing objects, a {YARD::CodeObjects::Proxy}
+class exists which can represent an object at a path that may or may not have been
+created. This is necessary to represent a reference to an object in code that is
+never defined in the same body of source code, or perhaps defined later. If any
+attributes of a proxy are accessed, it will immediately be resolved to the object
+at its declared path. In the case where such an object exists, it will act as
+a delegate to the object. However, if the object does not exist, a warning will
+be raised. Whenever arbitrary code objects are used, care should be taken in
+order to make sure attributes are not accessed on unresolvable proxies. An
+unresolvable proxy will return a class name of `Proxy` and #type of `:proxy`,
+for example:
+
+    P(:InvalidObject).type == :proxy  #=> true
+    P(:InvalidObject).is_a?(Proxy)    #=> true
+
+## Adding Data to Code Objects
+
+Code objects act as hash-like structures that allow any arbitrary value to be set.
+This allows easy extending of existing objects without creating custom subclasses.
+For instance, to add a timestamp to a method object (when it was modified, maybe),
+it is possible to simply do:
+
+    object = MethodObject.new(:root, "my_method")
+    object[:modified_at] = Time.now
+
+This value can now be retrieved on this object both by the hash `[]` syntax as
+well as like any other method:
+
+    object.modified_at #=> 2009-06-03 20:08:46 -0400
+
+## Creating a Custom CodeObject
+
+It should first be mentioned that creating a custom code object should not be
+necessary in most cases, except when functionality that cannot be represented
+by classical Ruby objects is added. A good example *might* be a test class,
+which although is technically a Ruby class, has a significantly different purpose
+in documentation and needs a different set of metadata, as well as its own
+representation in documentation.
+
+The {YARD::CodeObjects::Base#path} implementation is the most important part of the
+code object architecture. The first thing any custom code object must guarantee is
+that its path value is unique among all other objects. The recommended way to do this
+with custom objects is to add a descriptive prefix to the path. For example, the
+following is an implementation of the path for a hypothetical `FooObject`:
+
+    def path
+      "__FooPrefix" + sep + super
+    end
+
+Note that if our FooObject is a `NamespaceObject`, meaning if it can have child
+FooObjects defined inside of it, you may need to verify that the prefix is only
+applied once.

data/vendor/bundle/ruby/2.2.0/gems/yard-0.9.8/docs/GettingStarted.md

@@ -0,0 +1,674 @@
+# @title Getting Started Guide
+
+# Getting Started with YARD
+
+There are a few ways which YARD can be of use to you or your project. This
+document will cover the most common ways to use YARD:
+
+* [Documenting Code with YARD](#docing)
+* [Using YARD to Generate Documentation](#using)
+* [Configuring YARD](#config)
+* [Extending YARD](#extending)
+* [Templating YARD](#templating)
+* [Plugin Support](#plugins)
+
+<a name="docing"></a>
+
+## Documenting Code with YARD
+
+By default, YARD is compatible with the same RDoc syntax most Ruby developers
+are already familiar with. However, one of the biggest advantages of YARD is
+the extended meta-data syntax, commonly known as "tags", that you can use
+to express small bits of information in a structured and formal manner. While
+RDoc syntax expects you to describe your method in a completely free-form
+manner, YARD recommends declaring your parameters, return types, etc. with
+the `@tag` syntax, which makes outputting the documentation more consistent
+and easier to read. Consider the RDoc documentation for a method to_format:
+
+    # Converts the object into textual markup given a specific `format`
+    # (defaults to `:html`)
+    #
+    # == Parameters:
+    # format::
+    #   A Symbol declaring the format to convert the object to. This
+    #   can be `:text` or `:html`.
+    #
+    # == Returns:
+    # A string representing the object in a specified
+    # format.
+    #
+    def to_format(format = :html)
+      # format the object
+    end
+
+While this may seem easy enough to read and understand, it's hard for a machine
+to properly pull this data back out of our documentation. Also we've tied our
+markup to our content, and now our documentation becomes hard to maintain if
+we decide later to change our markup style (maybe we don't want the ":" suffix
+on our headers anymore).
+
+In YARD, we would simply define our method as:
+
+    # Converts the object into textual markup given a specific format.
+    #
+    # @param format [Symbol] the format type, `:text` or `:html`
+    # @return [String] the object converted into the expected format.
+    def to_format(format = :html)
+      # format the object
+    end
+
+Using tags we can add semantic metadata to our code without worrying about
+presentation. YARD will handle presentation for us when we decide to generate
+documentation later.
+
+## Which Markup Format?
+
+YARD does not impose a specific markup. The above example uses standard RDoc
+markup formatting, but YARD also supports textile and markdown via the
+command-line switch or `.yardopts` file (see below). This means that you are
+free to use whatever formatting you like. This guide is actually written
+using markdown. YARD, however, does add a few important syntaxes that are
+processed no matter which markup formatting you use, such as tag support
+and inter-document linking. These syntaxes are discussed below.
+
+## Adding Tags to Documentation
+
+The tag syntax that YARD uses is the same @tag-style syntax you may have seen
+if you've ever coded in Java, Python, PHP, Objective-C or a myriad of other
+languages. The following tag adds an author tag to your class:
+
+    # @author Loren Segal
+    class MyClass
+    end
+
+To allow for large amounts of text, the @tag syntax will recognize any indented
+lines following a tag as part of the tag data. For example:
+
+    # @deprecated Use {#my_new_method} instead of this method because
+    #   it uses a library that is no longer supported in Ruby 1.9.
+    #   The new method accepts the same parameters.
+    def mymethod
+    end
+
+### List of Tags
+
+A list of tags can be found in {file:docs/Tags.md#taglist}
+
+### Reference Tags
+
+To reduce the amount of duplication in writing documentation for repetitive
+code, YARD introduces "reference tags", which are not quite tags, but not
+quite docstrings either. In a sense, they are tag (and docstring) modifiers.
+Basically, any docstring (or tag) that begins with "(see OTHEROBJECT)" will
+implicitly link the docstring or tag to the "OTHEROBJECT", copying any data
+from that docstring/tag into your current object. Consider the example:
+
+    class MyWebServer
+      # Handles a request
+      # @param request [Request] the request object
+      # @return [String] the resulting webpage
+      def get(request) "hello" end
+
+      # (see #get)
+      def post(request) "hello" end
+    end
+
+The above `#post` method takes the docstring and all tags (`param` and `return`)
+of the `#get` method. When you generate HTML documentation, you will see this
+duplication automatically, so you don't have to manually type it out. We can
+also add our own custom docstring information below the "see" reference, and
+whatever we write will be appended to the docstring:
+
+    # (see #get)
+    # @note This method may modify our application state!
+    def post(request) self.state += 1; "hello" end
+
+Here we added another tag, but we could have also added plain text. The
+text must be appended *after* the `(see ...)` statement, preferably on
+a separate line.
+
+Note that we don't have to "refer" the whole docstring. We can also link
+individual tags instead. Since "get" and "post" actually have different
+descriptions, a more accurate example would be to only refer our parameter
+and return tags:
+
+    class MyWebServer
+      # Handles a GET request
+      # @param request [Request] the request object
+      # @return [String] the resulting webpage
+      def get(request) "hello" end
+
+      # Handles a POST request
+      # @note This method may modify our application state!
+      # @param (see #get)
+      # @return (see #get)
+      def post(request) self.state += 1; "hello" end
+    end
+
+The above copies all of the param and return tags from `#get`. Note that you
+cannot copy individual tags of a specific type with this syntax.
+
+## Declaring Types
+
+Some tags also have an optional "types" field which let us declare a list of
+types associated with the tag. For instance, a return tag can be declared
+with or without a types field.
+
+    # @return [String, nil] the contents of our object or nil
+    #   if the object has not been filled with data.
+    def validate; end
+
+    # We don't care about the "type" here:
+    # @return the object
+    def to_obj; end
+
+The list of types is in the form `[type1, type2, ...]` and is mostly free-form,
+so we can also specify duck-types or constant values. For example:
+
+    # @param argname [#to_s] any object that responds to `#to_s`
+    # @param argname [true, false] only true or false
+
+Note the latter example can be replaced by the meta-type "Boolean".
+Another meta-type is "void", which stands for "no meaningful value"
+and is used for return values. These meta-types are by convention
+only, but are recommended.
+
+List types can be specified in the form `CollectionClass<ElementType, ...>`.
+For instance, consider the following Array that holds a set of Strings and
+Symbols:
+
+    # @param list [Array<String, Symbol>] the list of strings and symbols.
+
+We mentioned that these type fields are "mostly" free-form. In truth, they
+are defined "by convention". To view samples of common type specifications
+and recommended conventions for writing type specifications, see
+[http://yardoc.org/types.html](http://yardoc.org/types.html). Note that these
+conventions may change every now and then, although we are working on a more
+"formal" type specification proposal.
+
+## Documenting Attributes
+
+To document a Ruby attribute, add documentation text above the attribute
+definition.
+
+    # Controls the amplitude of the waveform.
+    # @return [Numeric] the amplitude of the waveform
+    attr_accessor :amplitude
+
+As a short-hand syntax for declaring reader and writer attribute pairs,
+YARD will automatically wire up the correct method types and information
+by simply defining documentation in the `@return` tag. For example,
+the following declaration will show the correct information for the
+`waveform` attribute, both for the getter's return type and the
+setter's value parameter type: 
+
+    # @return [Numeric] the amplitude of the waveform
+    attr_accessor :amplitude
+
+In this case, the most important details for the attribute are the
+object type declaration and its descriptive text.
+
+### Documentation for a Separate Attribute Writer
+
+Usually an attribute will get and set a value using the same syntax,
+so there is no reason to have separate documentation for an attribute
+writer. In the above `amplitude` case, the `Numeric` type is both used
+for the getter and setter types.
+
+Sometimes, however, you might want to have separate documentation
+for the getter and setter. In this case, you would still add
+the documentation text to the getter declaration (or `attr_accessor`)
+and use `@overload` tags to declare the separate docstrings. For example:
+
+    # @overload amplitude
+    #   Gets the current waveform amplitude.
+    #   @return [Numeric] the amplitude of the waveform
+    # @overload amplitude=(value)
+    #   Sets the new amplitude.
+    #   @param value [Numeric] the new amplitude value
+    #   @note The new amplitude will only take effect if {#restart}
+    #     is called on the stream.
+
+Note that by default, YARD exposes the reader portion of the attribute
+in HTML output. If you have separate `attr_reader` and `attr_writer`
+declarations, make sure to put your documentation (for both reader
+and writer methods) on the reader declaration using `@overload`
+tags as described above. For example:
+
+    # @overload ...documentation here...
+    attr_reader :amplitude
+
+    # This documentation will be ignored by YARD.
+    attr_writer :amplitude
+
+## Documenting Custom DSL Methods
+
+Application code in Ruby often makes use of DSL style metaprogrammed methods.
+The most common is the `attr_accessor` method, which of course has built-in
+support in YARD. However, frameworks and libraries often expose custom
+methods that perform similar metaprogramming tasks, and it is often useful
+to document their functionality in your application. Consider the `property`
+method in a project like [DataMapper](http://datamapper.org), which creates
+a typed attribute for a database model. The code might look like:
+
+    class Post
+      include DataMapper::Resource
+
+      property :title, String
+    end
+
+As of version 0.7.0, YARD will automatically pick up on these basic methods if
+you document them with a docstring. Therefore, simply adding some comments to
+the code will cause it to generate documentation:
+
+    class Post
+      include DataMapper::Resource
+
+      # @return [String] the title property of the post
+      property :title, String
+    end
+
+Note that YARD uses the first argument in the method call to determine the
+method name. In some cases, this would not be the method name, and you would
+need to declare it manually. You can do so with the `@!method` directive:
+
+    # @!method foo
+    create_a_foo_method
+
+The @!method directive can also accept a full method signature with parameters:
+
+    # @!method foo(name, opts = {})
+    create_a_foo_method
+
+You can also set visibility and scope, or modify the method signature with
+extra tags. The following adds documentation for a private class method:
+
+    # @!method foo(opts = {})
+    # The foo method!
+    # @!scope class
+    # @!visibility private
+    create_a_private_foo_class_method
+
+Finally, you can tag a method as an attribute by replacing the @!method
+tag with @!attribute. The @!attribute directive allows for the flags [r], [w],
+or [rw] to declare a readonly, writeonly, or readwrite attribute, respectively.
+
+    # @!attribute [w]
+    # The writeonly foo attribute!
+    a_writeonly_attribute :foo
+
+(Note that if the name can be automatically detected, you do not need to
+specify it in the @!method or @!attribute directives)
+
+However, you will notice a few drawbacks with this basic support:
+
+1. There is a fair bit of duplication in such documentation. Specifically, we
+   repeat the term String and title twice in the property example.
+2. We must write a code comment for this property to show up in the documentation.
+   If we do not write a comment, it is ignored.
+
+### Macros
+
+Fortunately YARD 0.7.0 also adds macros, a powerful way to add support for
+these DSL methods on the fly without writing extra plugins. Macros allow
+you to interpolate arguments from the method call inside the docstring,
+reducing duplication. If we re-wrote the `property` example from above
+using a macro, it might look like:
+
+    class Post
+      include DataMapper::Resource
+
+      # @!macro dm.property
+      # @return [$2] the $1 $0 of the post
+      property :title, String
+    end
+
+(Note that $0 represents the method call, in this case `property`. The rest
+are arguments in the method call.)
+
+The above example is equivalent to the first version shown in the previous
+section. There is also some extra benefit to using this macro, in that we
+can re-apply it to any other property in our class by simply calling on
+the macro. The following:
+
+    # @!macro dm.property
+    property :view_count, Integer
+
+Would be equivalent to:
+
+    # @return [Integer] the view_count property of the post
+    property :view_count, Integer
+
+Finally, macros can be "attached" to method calls, allowing them to be implicitly
+activated every time the method call is seen in the source code of the class,
+or an inheriting class. By simply adding the `[attach]` flag, the macro
+becomes implicit on future calls. All of the properties below get documented
+by using this snippet:
+
+    class Post
+      include DataMapper::Resource
+
+      # @!macro [attach] dm.property
+      # @return [$2] the $1 $0 of the post
+      property :title, String
+      property :view_count, Integer
+      property :email, String
+    end
+
+You can read more about macros in the {file:docs/Tags.md Tags Overview} document.
+
+## Customized YARD Markup
+
+YARD supports a special syntax to link to other code objects, URLs, files,
+or embed docstrings between documents. This syntax has the general form
+of `{Name OptionalTitle}` (where `OptionalTitle` can have spaces, but `Name`
+cannot).
+
+### Linking Objects `{...}`
+
+To link another "object" (class, method, module, etc.), use the format:
+
+    {ObjectName#method OPTIONAL_TITLE}
+    {Class::CONSTANT My constant's title}
+    {#method_inside_current_namespace}
+
+Without an explicit title, YARD will use the relative path to the object as
+the link name. Note that you can also use relative paths inside the object
+path to refer to an object inside the same namespace as your current docstring.
+
+Note that the `@see` tag automatically links its data. You should not use
+the link syntax in this tag:
+
+    # @see #methodname   <- Correct.
+    # @see {#methodname} <- Incorrect.
+
+If you want to use a Hash, prefix the first { with "!":
+
+   # !{ :some_key => 'value' }
+
+### Linking URLs `{http://...}`
+
+URLs are also linked using this `{...}` syntax:
+
+    {http://example.com Optional Title}
+    {mailto:email@example.com}
+
+### Linking Files `{file:...}`
+
+Files can also be linked using this same syntax but by adding the `file:`
+prefix to the object name. Files refer to extra readme files you added
+via the command-line. Consider the following examples:
+
+    {file:docs/GettingStarted.md Getting Started}
+    {file:mypage.html Name#anchor}
+
+As shown, you can also add an optional `#anchor` if the page is an HTML link.
+
+### Embedding Docstrings `{include:...}`
+
+We saw the `(see ...)` syntax above, which allowed us to link an entire docstring
+with another. Sometimes, however, we just want to copy docstring text without
+tags. Using the same `{...}` syntax, but using the `include:` prefix, we can
+embed a docstring (minus tags) at a specific point in the text.
+
+    # This class is cool
+    # @abstract
+    class Foo; end
+
+    # This is another class. {include:Foo} too!
+    class Bar; end
+
+The docstring for Bar becomes:
+
+    "This is another class. This class is cool too!"
+
+### Embedding Files `{include:file:...}`
+
+You can embed the contents of files using `{include:file:path/to/file}`,
+similar to the `{include:OBJECT}` tag above. If the file uses a specific markup
+type, it will be applied and embedded as marked up text. The following
+shows how the tag can be used inside of comments:
+
+    # Here is an example of a highlighted Ruby file:
+    #
+    # {include:file:examples/test.rb}
+
+### Rendering Objects `{render:...}`
+
+Entire objects can also be rendered in place in documentation. This can be
+used for guide-style documentation which does not document the entire source
+tree, but instead selectively renders important classes or methods. Consider
+the following documentation inside of a README file:
+
+    !!!plain
+    = igLatinPay!
+
+    This library adds pig latin methods to the string class, allowing you
+    to transform sentences into pig latin.
+
+    {render:String#pig_latin}
+
+    You can also un-pig-latin-ify a word or sentence:
+
+    {render:String#de_pig_latin}
+
+The above would render the methods in place inside the README document,
+allowing you to summarize a small library in a single file.
+
+<a name="using"></a>
+
+## Using YARD to Generate Documentation
+
+### `yard` Executable
+
+YARD ships with a single executable aptly named `yard`. In addition to
+generating standard documentation for your project, you would use this tool
+if you wanted to:
+
+* Document all installed gems
+* Run a local documentation server
+* Generate UML diagrams using [Graphviz][graphviz]
+* View `ri`-style documentation
+* Diff your documentation
+* Analyze documentation statistics.
+
+The following commands are available in YARD 0.6.x (see `yard help` for a
+full list):
+
+    Usage: yard <command> [options]
+
+    Commands:
+    config   Views or edits current global configuration
+    diff     Returns the object diff of two gems or .yardoc files
+    doc      Generates documentation
+    gems     Builds YARD index for gems
+    graph    Graphs class diagram using Graphviz
+    help     Retrieves help for a command
+    ri       A tool to view documentation in the console like `ri`
+    server   Runs a local documentation server
+    stats    Prints documentation statistics on a set of files
+
+Note that `yardoc` is an alias for `yard doc`, and `yri` is an alias for
+`yard ri`. These commands are maintained for backwards compatibility.
+
+### `.yardopts` Options File
+
+Unless your documentation is very small, you'll end up needing to run `yardoc`
+with many options.  The `yardoc` tool will use the options found in this file.
+It is recommended to check this in to your repository and distribute it with
+your source. This file is placed at the root of your project (in the directory
+you run `yardoc` from) and contains all of arguments you would otherwise pass
+to the command-line tool. For instance, if you often type:
+
+    yardoc --no-private --protected app/**/*.rb - README LEGAL COPYING
+
+You can place the following into your `.yardopts`:
+
+    --no-private --protected app/**/*.rb - README LEGAL COPYING
+
+This way, you only need to type:
+
+    yardoc
+
+Any extra switches passed to the command-line now will be appended to your
+`.yardopts` options.
+
+Note that options for `yardoc` are discussed in the {file:README.md README},
+and a full overview of the `.yardopts` file can be found in {YARD::CLI::Yardoc}.
+
+### Documenting Extra Files
+
+"Extra files" are extra guide style documents that help to give a brief overview
+of how to use your library/framework, as well as any extra information that
+might be vital for your users. The most common "extra file" is the README,
+which is automatically detected by YARD if found in the root of your project
+(any file starting with `README*`). You can specify extra files on the command
+line (or in the `.yardopts` file) by listing them after the '-' separator:
+
+    yardoc lib/**/*.rb ext/**/*.c - LICENSE.txt
+
+Note that the README will automatically be picked up, so you do not need to
+specify it. If you don't want to modify the default file globs, you can ignore
+the first set of arguments:
+
+    yardoc - LICENSE.txt
+
+Below you can read about how to customize the look of these extra files, both
+with markup and pretty titles.
+
+#### Adding Meta-Data to Extra Files
+
+You can add YARD-style `@tag` metadata to the top of any extra file if prefixed
+by a `#` hash comment. YARD allows for arbitrary meta-data, but pays special
+attention to the tags `@markup`, `@encoding`, and `@title`. Note that there
+cannot be any whitespace before the tags. Here is an example of some tag data
+in a README:
+
+    # @markup markdown
+    # @title The Best Library in the World!
+    # @author The Author Name
+
+    This is the best library you will ever meet. Lipsum ...
+
+The `@markup` tag allows you to specify a markup format to use for the file,
+including "markdown", "textile", "rdoc", "ruby", "text", "html", or "none"
+(no markup). This can be used when the markup cannot be auto-detected using
+the extension of the filename, if the file has no extension, or if you want
+to override the auto-detection.
+
+By using `@encoding` you can specify a non-standard encoding. Note that
+`yardoc --charset` sets the global encoding (for all comments / files),
+so if you are using unicode across all your files, you can specify it there.
+Using the `@encoding` tag might be used to override the default global
+charset, say, if you had a localized `README.jp` file with SJIS data.
+Also note that this only affects Ruby 1.9.x, as Ruby 1.8 is not properly
+encoding aware.
+
+The `@title` tag allows you to specify a full title name for the document.
+By default, YARD uses the filename as the title of the document and lists
+it in the file list in the index and file menu. In some cases, the file name
+might not be descriptive enough, so YARD allows you to specify a full title:
+
+    contents of TITLE.txt:
+    # @title The Title of The Document
+
+Currently all other meta-data is hidden from view, though accessible
+programmatically using the {YARD::CodeObjects::ExtraFileObject} class.
+
+You can wrap the meta data section in an HTML comment to prevent it
+from being displayed in rendered markdown on GitHub:
+
+    <!--
+    # @markup markdown
+    # @title The Best Library in the World!
+    # @author The Author Name
+    -->
+
+    This is the best library you will ever meet. Lipsum ...
+
+<a name="config"></a>
+
+## Configuring YARD
+
+YARD (0.6.2+) supports a global configuration file stored in `~/.yard/config`.
+This file is stored as a YAML file and can contain arbitrary keys and values
+that can be used by YARD at run-time. YARD defines specific keys that are used
+to control various features, and they are listed in {YARD::Config::DEFAULT_CONFIG_OPTIONS}.
+A sample configuration file might look like:
+
+    :load_plugins: false
+    :ignored_plugins:
+      - my_plugin
+      - my_other_plugin
+    :autoload_plugins:
+      - my_autoload_plugin
+    :safe_mode: false
+
+You can also view and edit these configuration options from the commandline
+using the `yard config` command. To list your configuration, use `yard config --list`.
+To view a key, use `yard config ITEM`, and to set it, use `yard config ITEM VALUE`.
+
+<a name="extending"></a>
+
+## Extending YARD
+
+There are many ways to extend YARD to support non-standard Ruby syntax (DSLs),
+add new meta-data tags or programmatically access the intermediate metadata
+and documentation from code. An overview of YARD's full architecture can be
+found in the {file:docs/Overview.md} document.
+
+For information on adding support for Ruby DSLs, see the {file:docs/Handlers.md}
+and {file:docs/Parser.md} architecture documents.
+
+For information on adding extra tags, see {file:docs/Tags.md}.
+
+For information on accessing the data YARD stores about your documentation,
+look at the {file:docs/CodeObjects.md} architecture document.
+
+<a name="templating"></a>
+
+## Templating YARD
+
+In many cases you may want to change the style of YARD's templates or add extra
+information after extending it. The {file:docs/Templates.md} architecture
+document covers the basics of how YARD's templating system works.
+
+<a name="plugins"></a>
+
+## Plugin Support
+
+YARD will allow any RubyGem installed on your system (or in your Gemfile)
+to be loaded as a plugin provided it has a name with the prefix of
+`yard-` or `yard_`. In order to load a plugin, use the `--plugin`
+switch with the short-name (name minus the `yard-` prefix) or full-name
+of the gem:
+
+    $ gem install yard-custom-plugin
+    ...
+    $ yard doc --plugin custom-plugin
+    or
+    $ yard doc --plugin yard-custom-plugin
+
+Note: you can also put this switch in your `.yardopts` file. See the
+      `.yardopts` section above for more information.
+
+You can use this functionality to load a custom plugin that
+[extend](#extending) YARD's functionality. A good example of this
+is the [yard-rspec][yard-rspec] plugin, which adds [RSpec][rspec] specifications
+to your documentation (`yardoc` and `yri`). You can try it out by installing
+the gem or cloning the project and trying the example:
+
+    $ gem install yard-rspec
+
+ You can then load the plugin with:
+
+    $ yard doc --plugin rspec
+
+YARD also provides a way to temporarily disable plugins on a per-user basis.
+To disable a plugin create the file `~/.yard/ignored_plugins` with a list
+of plugin names separated by newlines. Note that the `.yard` directory might
+not exist, so you may need to create it.
+
+[graphviz]:http://www.graphviz.org
+[yard-rspec]:http://github.com/lsegal/yard-spec-plugin
+[rspec]:http://rspec.info