dirwatch 0.0.6 → 0.0.7

data/vendor/bundle/ruby/2.3.0/gems/rspec-core-3.7.0/Changelog.md

@@ -1,2187 +0,0 @@
-### Development
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.7.0...master)
-
-### 3.7.0 / 2017-10-17
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.6.0...v3.7.0)
-
-Enhancements:
-
-* Add `-n` alias for `--next-failure`. (Ian Ker-Seymer, #2434)
-* Improve compatibility with `--enable-frozen-string-literal` option
-  on Ruby 2.3+. (Pat Allan, #2425, #2427, #2437)
-* Do not run `:context` hooks for example groups that have been skipped.
-  (Devon Estes, #2442)
-* Add `errors_outside_of_examples_count` to the JSON formatter.
-  (Takeshi Arabiki, #2448)
-
-Bug Fixes:
-
-* Improve compatibility with frozen string literal flag. (#2425, Pat Allan)
-
-### 3.6.0 / 2017-05-04
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.6.0.beta2...v3.6.0)
-
-Enhancements:
-
-* Add seed information to JSON formatter output. (#2388, Mitsutaka Mimura)
-* Include example id in the JSON formatter output. (#2369, Xavier Shay)
-* Respect changes to `config.output_stream` after formatters have been
-  setup. (#2401, #2419, Ilya Lavrov)
-
-Bug Fixes:
-
-* Delay formatter loading until the last minute to allow accessing the reporter
-  without triggering formatter setup. (Jon Rowe, #2243)
-* Ensure context hook failures running before an example can access the
-  reporter. (Jon Jensen, #2387)
-* Multiple fixes to allow using the runner multiple times within the same
-  process: `RSpec.clear_examples` resets the formatter and no longer clears
-  shared examples, and streams can be used across multiple runs rather than
-  being closed after the first. (#2368, Xavier Shay)
-* Prevent unexpected `example_group_finished` notifications causing an error.
-  (#2396, VTJamie)
-* Fix bugs where `config.when_first_matching_example_defined` hooks would fire
-  multiple times in some cases. (Yuji Nakayama, #2400)
-* Default `last_run_status` to "unknown" when the `status` field in the
-  persistence file contains an unrecognized value. (#2360, matrinox)
-* Prevent `let` from defining an `initialize` method. (#2414, Jon Rowe)
-
-### 3.6.0.beta2 / 2016-12-12
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.6.0.beta1...v3.6.0.beta2)
-
-Enhancements:
-
-* Include count of errors occurring outside examples in default summaries.
-  (#2351, Jon Rowe)
-* Warn when including shared example groups recursively. (#2356, Jon Rowe)
-* Improve failure snippet syntax highlighting with CodeRay to highlight
-  RSpec "keywords" like `expect`. (#2358, Myron Marston)
-
-### 3.6.0.beta1 / 2016-10-09
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.5.4...v3.6.0.beta1)
-
-Enhancements:
-
-* Warn when duplicate shared examples definitions are loaded due to being
-  defined in files matching the spec pattern (e.g. `_spec.rb`) (#2278, Devon Estes)
-* Improve metadata filtering so that it can match against any object
-  that implements `===` instead of treating regular expressions as
-  special. (Myron Marston, #2294)
-* Improve `rspec -v` so that it prints out the versions of each part of
-  RSpec to prevent confusion. (Myron Marston, #2304)
-* Add `config.fail_if_no_examples` option which causes RSpec to fail if
-  no examples are found. (Ewa Czechowska, #2302)
-* Nicely format errors encountered while loading spec files.
-  (Myron Marston, #2323)
-* Improve the API for enabling and disabling color output (Josh
-  Justice, #2321):
-  * Automatically enable color if the output is a TTY, since color is
-    nearly always desirable if the output can handle it.
-  * Introduce new CLI flag to force color on (`--force-color`), even
-    if the output is not a TTY. `--no-color` continues to work as well.
-  * Introduce `config.color_mode` for configuring the color from Ruby.
-    `:automatic` is the default and will produce color if the output is
-    a TTY. `:on` forces it on and `:off` forces it off.
-
-### 3.5.4 / 2016-09-30
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.5.3...v3.5.4)
-
-Bug Fixes:
-
-* Remove accumulated `ExampleGroup` constants when reseting RSpec,
-  preventing a memory leak. (TravisSpangle, #2328)
-
-### 3.5.3 / 2016-09-02
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.5.2...v3.5.3)
-
-Bug Fixes:
-
-* When applying shared group metadata to a host group, overwrite
-  conflicting keys if the value in the host group was inherited from
-  a parent group instead of being specified at that level.
-  (Myron Marston, #2307)
-* Handle errors in `:suite` hooks and provide the same nicely formatted
-  output as errors that happen in examples. (Myron Marston, #2316)
-* Set the exit status to non-zero when an error occurs in an
-  `after(:context)` hook. (Myron Marston, #2320)
-
-### 3.5.2 / 2016-07-28
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.5.1...v3.5.2)
-
-Bug Fixes:
-
-* Wait to report `example_finished` until the example's `execution_result`
-  has been completely filled in. (Myron Marston, #2291)
-* Make sure example block is still available when using `duplicate_with`
-  to clone examples. (bootstraponline, #2298)
-* Don't include the default `--pattern` in the Rake task when
-  `rspec_opts` specifies its own. (Jon Rowe, #2305)
-
-### 3.5.1 / 2016-07-06
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.5.0...v3.5.1)
-
-Bug Fixes:
-
-* Ensure that config hooks that are added to existing example groups are
-  added only once. (Eugene Kenny, #2280)
-
-### 3.5.0 / 2016-07-01
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.5.0.beta4...v3.5.0)
-
-Enhancements:
-
-* Include any `SPEC_OPTS` in reproduction command printed at the end of
-  a bisect run. (Simon Coffey, #2274)
-
-Bug Fixes:
-
-* Handle `--bisect` in `SPEC_OPTS` environment variable correctly so as
-  to avoid infinite recursion. (Simon Coffey, #2271)
-
-### 3.5.0.beta4 / 2016-06-05
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.5.0.beta3...v3.5.0.beta4)
-
-Enhancements:
-
-* Filter out bundler stackframes from backtraces by default, since
-  Bundler 1.12 now includes its own frames in stack traces produced
-  by using `bundle exec`. (Myron Marston, #2240)
-* HTML Formatter uses exception presenter to get failure message
-  for consistency with other formatters. (@mrageh, #2222)
-* Load spec files in the order of the directories or files passed
-  at the command line, making it easy to make some specs run before
-  others in a one-off manner.  For example, `rspec spec/unit
-  spec/acceptance --order defined` will run unit specs before acceptance
-  specs. (Myron Marston, #2253)
-* Add new `config.include_context` API for configuring global or
-  filtered inclusion of shared contexts in example groups.
-  (Myron Marston, #2256)
-* Add new `config.shared_context_metadata_behavior = :apply_to_host_groups`
-  option, which causes shared context metadata to be inherited by the
-  metadata hash of all host groups and examples instead of configuring
-  implicit auto-inclusion based on the passed metadata. (Myron Marston, #2256)
-
-Bug Fixes:
-
-* Fix `--bisect` so it works on large spec suites that were previously triggering
-  "Argument list too long errors" due to all the spec locations being passed as
-  CLI args. (Matt Jones, #2223).
-* Fix deprecated `:example_group`-based filtering so that it properly
-  applies to matching example groups. (Myron Marston, #2234)
-* Fix `NoMethodError` caused by Java backtraces on JRuby. (Michele Piccirillo, #2244)
-
-### 3.5.0.beta3 / 2016-04-02
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.5.0.beta2...v3.5.0.beta3)
-
-Enhancements:
-
-* Add new `config.filter_run_when_matching` API, intended to replace
-  the combination of `config.filter_run` and
-  `config.run_all_when_everything_filtered` (Myron Marston, #2206)
-
-Bug Fixes:
-
-* Use the encoded string logic for source extraction. (Jon Rowe, #2183)
-* Fix rounding issue in duration formatting helper. (Fabersky, Jon Rowe, #2208)
-* Fix failure snippet extraction so that `def-end` snippets
-  ending with `end`-only line can be extracted properly.
-  (Yuji Nakayama, #2215)
-
-### 3.5.0.beta2 / 2016-03-10
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.5.0.beta1...v3.5.0.beta2)
-
-Enhancements:
-
-* Remove unneeded `:execution_result` example group metadata, saving a
-  bit of memory. (Myron Marston, #2172)
-* Apply hooks registered with `config` to previously defined groups.
-  (Myron Marston, #2189)
-* `RSpec::Core::Configuration#reporter` is now public API under SemVer.
-  (Jon Rowe, #2193)
-* Add new `config.when_first_matching_example_defined` hook. (Myron
-  Marston, #2175)
-
-### 3.5.0.beta1 / 2016-02-06
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.4.4...v3.5.0.beta1)
-
-Enhancements:
-
-* Add `RSpec::Core::ExampleGroup.currently_executing_a_context_hook?`,
-  primarily for use by rspec-rails. (Sam Phippen, #2131)
-
-Bug Fixes:
-
-* Ensure `MultipleExceptionError` does not contain a recursive reference
-  to itself. (Sam Phippen, #2133)
-
-### 3.4.4 / 2016-03-09
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.4.3...v3.4.4)
-
-Bug Fixes:
-
-* Fix `RSpec::Core::RakeTask` so that it works with Rake 11.
-  (Travis Grathwell, #2197)
-
-### 3.4.3 / 2016-02-19
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.4.2...v3.4.3)
-
-Bug Fixes:
-
-* Prevent a `TypeError` from occurring when running via the rake task when
-  Ruby crashes. (Patrik Wenger, #2161)
-* Only consider example and group declaration lines from a specific file
-  when applying line number filtering, instead of considering all
-  declaration lines from all spec files. (Myron Marston, #2170)
-* Fix failure snippet extraction so that snippets that contain `do-end` style
-  block and end with `end`-only line can be extracted properly.
-  (Yuji Nakayama, #2173)
-* Prevent infinite recursion when an exception is caused by itself.
-  (Jon Rowe, #2128)
-
-### 3.4.2 / 2016-01-26
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.4.1...v3.4.2)
-
-Bug Fixes:
-
-* Fix `rspec --profile` when an example calls `abort` or `exit`.
-  (Bradley Schaefer, #2144)
-* Fix `--drb` so that when no DRb server is running, it prevents
-  the DRb connection error from being listed as the cause of all
-  expectation failures. (Myron Marston, #2156)
-* Fix syntax highlighter so that it works when the `coderay` gem is
-  installed as a rubygem but not already available on your load path
-  (as happens when you use bundler). (Myron Marston, #2159)
-
-### 3.4.1 / 2015-11-18
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.4.0...v3.4.1)
-
-Bug Fixes:
-
-* Fix backtrace formatter to handle backtraces that are `nil`.
-  (Myron Marston, #2118)
-
-### 3.4.0 / 2015-11-11
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.3.2...v3.4.0)
-
-Enhancements:
-
-* Combine multiple `--pattern` arguments making them equivalent to
-  `--pattern=1,2,...,n`. (Jon Rowe, #2002)
-* Improve `inspect` and `to_s` output for `RSpec::Core::Example`
-  objects, replacing Ruby's excessively verbose output. (Gavin Miller, #1922)
-* Add `silence_filter_announcements` configuration option.
-  (David Raffensperger, #2007)
-* Add optional `example_finished` notification to the reporter protocol for
-  when you don't care about the example outcome. (Jon Rowe, #2013)
-* Switch `--bisect` to a recursion-based bisection algorithm rather than
-  a permutation-based one. This better handles cases where an example
-  depends upon multiple other examples instead of just one and minimizes
-  the number of runs necessary to determine that an example set cannot be
-  minimized further. (Simon Coffey, #1997)
-* Allow simple filters (e.g. `:symbol` key only) to be triggered by truthey
-  values. (Tim Mertens, #2035)
-* Remove unneeded warning about need for `ansicon` on Windows when using
-  RSpec's `--color` option. (Ashley Engelund, #2038)
-* Add option to configure RSpec to raise errors when issuing warnings.
-  (Jon Rowe, #2052)
-* Append the root `cause` of a failure or error to the printed failure
-  output when a `cause` is available. (Adam Magan)
-* Stop rescuing `NoMemoryError`, `SignalExcepetion`, `Interrupt` and
-  `SystemExit`. It is dangerous to interfere with these. (Myron Marston, #2063)
-* Add `config.project_source_dirs` setting which RSpec uses to determine
-  if a backtrace line comes from your project source or from some
-  external library. It defaults to `spec`, `lib` and `app` but can be
-  configured differently. (Myron Marston, #2088)
-* Improve failure line detection so that it looks for the failure line
-  in any project source directory instead of just in the spec file.
-  In addition, if no backtrace lines can be found from a project source
-  file, we fall back to displaying the source of the first backtrace
-  line. This should virtually eliminate the "Unable to find matching
-  line from backtrace" messages. (Myron Marston, #2088)
-* Add support for `:extra_failure_lines` example metadata that will
-  be appended to the failure output. (bootstraponline, #2092).
-* Add `RSpec::Core::Example#duplicate_with` to produce new examples
-  with cloned metadata. (bootstraponline, #2098)
-* Add `RSpec::Core::Configuration#on_example_group_definition` to register
-  hooks to be invoked when example groups are created. (bootstraponline, #2094)
-* Add `add_example` and `remove_example` to `RSpec::Core::ExampleGroup` to
-  allow  manipulating an example groups examples. (bootstraponline, #2095)
-* Display multiline failure source lines in failure output when Ripper is
-  available (MRI >= 1.9.2, and JRuby >= 1.7.5 && < 9.0.0.0.rc1).
-  (Yuji Nakayama, #2083)
-* Add `max_displayed_failure_line_count` configuration option
-  (defaults to 10). (Yuji Nakayama, #2083)
-* Enhance `fail_fast` option so it can take a number (e.g. `--fail-fast=3`)
-  to force the run to abort after the specified number of failures.
-  (Jack Scotti, #2065)
-* Syntax highlight the failure snippets in text formatters when `color`
-  is enabled and the `coderay` gem is installed on a POSIX system.
-  (Myron Marston, #2109)
-
-Bug Fixes:
-
-* Lock `example_status_persistence_file` when reading from and writing
-  to it to prevent race conditions when multiple processes try to use
-  it. (Ben Woosley, #2029)
-* Fix regression in 3.3 that caused spec file names with square brackets in
-  them (such as `1[]_spec.rb`) to not be loaded properly. (Myron Marston, #2041)
-* Fix output encoding issue caused by ASCII literal on 1.9.3 (Jon Rowe, #2072)
-* Fix requires in `rspec/core/rake_task.rb` to avoid double requires
-  seen by some users. (Myron Marston, #2101)
-
-### 3.3.2 / 2015-07-15
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.3.1...v3.3.2)
-
-Bug Fixes:
-
-* Fix formatters to handle exceptions for which `backtrace` returns `nil`.
-  (Myron Marston, #2023)
-* Fix duplicate formatter detection so that it allows subclasses of formatters
-  to be added. (Sebastián Tello, #2019)
-
-### 3.3.1 / 2015-06-18
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.3.0...v3.3.1)
-
-Bug Fixes:
-
-* Correctly run `before(:suite)` (and friends) in the context of an example
-  group instance, thus making the expected RSpec environment available.
-  (Jon Rowe, #1986)
-
-### 3.3.0 / 2015-06-12
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.2.3...v3.3.0)
-
-Enhancements:
-
-* Expose the reporter used to run examples via `RSpec::Core::Example#reporter`.
-  (Jon Rowe, #1866)
-* Make `RSpec::Core::Reporter#message` a public supported API. (Jon Rowe, #1866)
-* Allow custom formatter events to be published via
-  `RSpec::Core::Reporter#publish(event_name, hash_of_attributes)`. (Jon Rowe, #1869)
-* Remove dependency on the standard library `Set` and replace with `RSpec::Core::Set`.
-  (Jon Rowe, #1870)
-* Assign a unique id to each example and group so that they can be
-  uniquely identified, even for shared examples (and similar situations)
-  where the location isn't unique. (Myron Marston, #1884)
-* Use the example id in the rerun command printed for failed examples
-  when the location is not unique. (Myron Marston, #1884)
-* Add `config.example_status_persistence_file_path` option, which is
-  used to persist the last run status of each example. (Myron Marston, #1888)
-* Add `:last_run_status` metadata to each example, which indicates what
-  happened the last time an example ran. (Myron Marston, #1888)
-* Add `--only-failures` CLI option which filters to only the examples
-  that failed the last time they ran. (Myron Marston, #1888)
-* Add `--next-failure` CLI option which allows you to repeatedly focus
-  on just one of the currently failing examples, then move on to the
-  next failure, etc. (Myron Marston, #1888)
-* Make `--order random` ordering stable, so that when you rerun a
-  subset with a given seed, the examples will be order consistently
-  relative to each other. (Myron Marston, #1908)
-* Set example group constant earlier so errors when evaluating the context
-  include the example group name (Myron Marson, #1911)
-* Make `let` and `subject` threadsafe. (Josh Cheek, #1858)
-* Add version information into the JSON formatter. (Mark Swinson, #1883)
-* Add `--bisect` CLI option, which will repeatedly run your suite in
-  order to isolate the failures to the smallest reproducible case.
-  (Myron Marston, #1917)
-* For `config.include`, `config.extend` and `config.prepend`, apply the
-  module to previously defined matching example groups. (Eugene Kenny, #1935)
-* When invalid options are parsed, notify users where they came from
-  (e.g. `.rspec` or `~/.rspec` or `ENV['SPEC_OPTS']`) so they can
-  easily find the source of the problem. (Myron Marston, #1940)
-* Add pending message contents to the json formatter output. (Jon Rowe, #1949)
-* Add shared group backtrace to the output displayed by the built-in
-  formatters for pending examples that have been fixed. (Myron Marston, #1946)
-* Add support for `:aggregate_failures` metadata. Tag an example or
-  group with this metadata and it'll use rspec-expectations'
-  `aggregate_failures` feature to allow multiple failures in an example
-  and list them all, rather than aborting on the first failure. (Myron
-  Marston, #1946)
-* When no formatter implements #message add a fallback to prevent those
-  messages being lost. (Jon Rowe, #1980)
-* Profiling examples now takes into account time spent in `before(:context)`
-  hooks. (Denis Laliberté, Jon Rowe, #1971)
-* Improve failure output when an example has multiple exceptions, such
-  as one from an `it` block and one from an `after` block. (Myron Marston, #1985)
-
-Bug Fixes:
-
-* Handle invalid UTF-8 strings within exception methods. (Benjamin Fleischer, #1760)
-* Fix Rake Task quoting of file names with quotes to work properly on
-  Windows. (Myron Marston, #1887)
-* Fix `RSpec::Core::RakeTask#failure_message` so that it gets printed
-  when the task failed. (Myron Marston, #1905)
-* Make `let` work properly when defined in a shared context that is applied
-  to an individual example via metadata. (Myron Marston, #1912)
-* Ensure `rspec/autorun` respects configuration defaults. (Jon Rowe, #1933)
-* Prevent modules overriding example group defined methods when included,
-  prepended or extended by config defined after an example group. (Eugene Kenny, #1935)
-* Fix regression which caused shared examples to be mistakenly run when specs
-  where filtered to a particular location.  (Ben Axnick, #1963)
-* Fix time formatting logic so that it displays 70 seconds as "1 minute,
-  10 seconds" rather than "1 minute, 1 second". (Paul Brennan, #1984)
-* Fix regression where the formatter loader would allow duplicate formatters.
-  (Jon Rowe, #1990)
-
-### 3.2.3 / 2015-04-06
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.2.2...v3.2.3)
-
-Bug Fixes:
-
-* Fix how the DSL methods are defined so that RSpec is compatible with
-  gems that define methods of the same name on `Kernel` (such as
-  the `its-it` gem). (Alex Kwiatkowski, Ryan Ong, #1907)
-* Fix `before(:context) { skip }` so that it does not wrongly cause the
-  spec suite to exit with a non-zero status when no examples failed.
-  (Myron Marston, #1926)
-
-### 3.2.2 / 2015-03-11
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.2.1...v3.2.2)
-
-Bug Fixes:
-
-* Fix regression in 3.2.0 that allowed tag-filtered examples to
-  run even if there was a location filter applied to the spec
-  file that was intended to limit the file to other examples.
-  (#1894, Myron Marston)
-
-### 3.2.1 / 2015-02-23
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.2.0...v3.2.1)
-
-Bug Fixes:
-
-* Notify start-of-run seed _before_ `start` notification rather than
-  _after_ so that formatters like Fuubar work properly. (Samuel Esposito, #1882)
-
-### 3.2.0 / 2015-02-03
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.1.7...v3.2.0)
-
-Enhancements:
-
-* Improve the `inspect` output of example groups. (Mike Dalton, #1687)
-* When rake task fails, only output the command if `verbose` flag is
-  set. (Ben Snape, #1704)
-* Add `RSpec.clear_examples` as a clear way to reset examples in between
-  spec runs, whilst retaining user configuration.  (Alexey Fedorov, #1706)
-* Reduce string allocations when defining and running examples by 70%
-  and 50% respectively. (Myron Marston, #1738)
-* Removed dependency on pathname from stdlib. (Sam Phippen, #1703)
-* Improve the message presented when a user hits Ctrl-C.
-  (Alex Chaffee #1717, #1742)
-* Improve shared example group inclusion backtrace displayed
-  in failed example output so that it works for all methods
-  of including shared example groups and shows all inclusion
-  locations. (Myron Marston, #1763)
-* Issue seed notification at start (as well as the end) of the reporter
-  run. (Arlandis Word, #1761)
-* Improve the documentation of around hooks. (Jim Kingdon, #1772)
-* Support prepending of modules into example groups from config and allow
-  filtering based on metadata. (Arlandis Word, #1806)
-* Emit warnings when `:suite` hooks are registered on an example group
-  (where it has always been ignored) or are registered with metadata
-  (which has always been ignored). (Myron Marston, #1805)
-* Provide a friendly error message when users call RSpec example group
-  APIs (e.g. `context`, `describe`, `it`, `let`, `before`, etc) from
-  within an example where those APIs are unavailable. (Myron Marston, #1819)
-* Provide a friendly error message when users call RSpec example
-  APIs (e.g. `expect`, `double`, `stub_const`, etc) from
-  within an example group where those APIs are unavailable.
-  (Myron Marston, #1819)
-* Add new `RSpec::Core::Sandbox.sandboxed { }` API that facilitates
-  testing RSpec with RSpec, allowing you to define example groups
-  and example from within an example without affecting the global
-  `RSpec.world` state. (Tyler Ball, 1808)
-* Apply line-number filters only to the files they are scoped to,
-  allowing you to mix filtered and unfiltered files. (Myron Marston, #1839)
-* When dumping pending examples, include the failure details so that you
-  don't have to un-pend the example to see it. (Myron Marston, #1844)
-* Make `-I` option support multiple values when separated by
-  `File::PATH_SEPARATOR`, such as `rspec -I foo:bar`. This matches
-  the behavior of Ruby's `-I` option. (Fumiaki Matsushima, #1855).
-* Treat each example as having a singleton example group for the
-  purposes of applying metadata-based features that normally apply
-  to example groups to individually tagged examples. For example,
-  `RSpec.shared_context "Uses redis", :uses_redis` will now apply
-  to individual examples tagged with `:uses_redis`, as will
-  `config.include RedisHelpers, :uses_redis`, and
-  `config.before(:context, :uses_redis) { }`, etc. (Myron Marston, #1749)
-
-Bug Fixes:
-
-* When assigning generated example descriptions, surface errors
-  raised by `matcher.description` in the example description.
-  (Myron Marston, #1771)
-* Don't consider expectations from `after` hooks when generating
-  example descriptions. (Myron Marston, #1771)
-* Don't apply metadata-filtered config hooks to examples in groups
-  with matching metadata when those examples override the parent
-  metadata value to not match. (Myron Marston, #1796)
-* Fix `config.expect_with :minitest` so that `skip` uses RSpec's
-  implementation rather than Minitest's. (Jonathan Rochkind, #1822)
-* Fix `NameError` caused when duplicate example group aliases are defined and
-  the DSL is not globally exposed. (Aaron Kromer, #1825)
-* When a shared example defined in an external file fails, use the host
-  example group (from a loaded spec file) for the re-run command to
-  ensure the command will actually work. (Myron Marston, #1835)
-* Fix location filtering to work properly for examples defined in
-  a nested example group within a shared example group defined in
-  an external file. (Bradley Schaefer, Xavier Shay, Myron Marston, #1837)
-* When a pending example fails (as expected) due to a mock expectation,
-  set `RSpec::Core::Example::ExecutionResult#pending_exception` --
-  previously it was not being set but should have been. (Myron Marston, #1844)
-* Fix rake task to work when `rspec-core` is installed in a directory
-  containing a space. (Guido Günther, #1845)
-* Fix regression in 3.1 that caused `describe Regexp` to raise errors.
-  (Durran Jordan, #1853)
-* Fix regression in 3.x that caused the profile information to be printed
-  after the summary. (Max Lincoln, #1857)
-* Apply `--seed` before loading `--require` files so that required files
-  can access the provided seed. (Myron Marston, #1745)
-* Handle `RSpec::Core::Formatters::DeprecationFormatter::FileStream` being
-  reopened with an IO stream, which sometimes happens with spring.
-  (Kevin Mook, #1757)
-
-### 3.1.7 / 2014-10-11
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.1.6...v3.1.7)
-
-Bug Fixes:
-
-* Fix `Metadata.relative_path` so that for a current directory of
-  `/foo/bar`, `/foo/bar_1` is not wrongly converted to `._1`.
-  (Akos Vandra, #1730)
-* Prevent constant lookup mistakenly finding `RSpec::ExampleGroups` generated
-  constants on 1.9.2 by appending a trailing `_` to the generated names.
-  (Jon Rowe, #1737)
-* Fix bug in `:pending` metadata. If it got set in any way besides passing
-  it as part of the metadata literal passed to `it` (such as by using
-  `define_derived_metadata`), it did not have the desired effect,
-  instead marking the example as `:passed`. (Myron Marston, #1739)
-
-### 3.1.6 / 2014-10-08
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.1.5...v3.1.6)
-
-Bug Fixes:
-
-* Fix regression in rake task pattern handling, that prevented patterns
-  that were relative from the current directory rather than from `spec`
-  from working properly. (Myron Marston, #1734)
-* Prevent rake task from generating duplicate load path entries.
-  (Myron Marston, #1735)
-
-### 3.1.5 / 2014-09-29
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.1.4...v3.1.5)
-
-Bug Fixes:
-
-* Fix issue with the rake task incorrectly escaping strings on Windows.
-  (Jon Rowe #1718)
-* Support absolute path patterns. While this wasn't officially supported
-  previously, setting `rake_task.pattern` to an absolute path pattern in
-  RSpec 3.0 and before worked since it delegated to `FileList` internally
-  (but now just forwards the pattern on to the `rspec` command).
-  (Myron Marston, #1726)
-
-### 3.1.4 / 2014-09-18
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.1.3...v3.1.4)
-
-Bug Fixes:
-
-* Fix implicit `subject` when using `describe false` or `describe nil`
-  so that it returns the provided primitive rather than the string
-  representation. (Myron Marston, #1710)
-* Fix backtrace filtering to allow code in subdirectories of your
-  current working directory (such as vendor/bundle/...) to be filtered
-  from backtraces. (Myron Marston, #1708)
-
-### 3.1.3 / 2014-09-15
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.1.2...v3.1.3)
-
-Bug Fixes:
-
-* Fix yet another regression in rake task pattern handling, to allow
-  `task.pattern = FileList["..."]` to work. That was never intended
-  to be supported but accidentally worked in 3.0 and earlier.
-  (Myron Marston, #1701)
-* Fix pattern handling so that files are normalized to absolute paths
-  before subtracting the `--exclude-pattern` matched files from the
-  `--pattern` matched files so that it still works even if the patterns
-  are in slightly different forms (e.g. one starting with `./`).
-  (Christian Nelson, #1698)
-
-### 3.1.2 / 2014-09-08
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.1.1...v3.1.2)
-
-Bug Fixes:
-
-* Fix another regression in rake task pattern handling, so that patterns
-  that start with `./` still work. (Christian Nelson, #1696)
-
-### 3.1.1 / 2014-09-05
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.1.0...v3.1.1)
-
-Bug Fixes:
-
-* Fix a regression in rake task pattern handling, so that `rake_task.pattern = array`
-  works again. While we never intended to support array values (or even knew that worked!),
-  the implementation from 3.0 and earlier used `FileList` internally, which allows arrays.
-  The fix restores the old behavior. (Myron Marston, #1694)
-
-### 3.1.0 / 2014-09-04
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.0.4...v3.1.0)
-
-Enhancements:
-
-* Update files generated by `rspec --init` so that warnings are enabled
-  in commented out section of `spec_helper` rather than `.rspec` so users
-  have to consciously opt-in to the setting. (Andrew Hooker, #1572)
-* Update `spec_helper` generated by `rspec --init` so that it sets the new
-  rspec-expectations `include_chain_clauses_in_custom_matcher_descriptions`
-  config option (which will be on by default in RSpec 4) and also sets the
-  rspec-mocks `verify_partial_doubles` option (which will also default
-  to on in RSpec 4). (Myron Marston, #1647)
-* Provide an `inspect` output for example procsy objects (used in around
-  hooks) that doesn't make them look like procs. (Jon Rowe, #1620)
-* Remove a few unneeded `require` statements from
-  `rspec/core/rake_task.rb`, making it even more lighterweight.
-  (Myron Marston, #1640)
-* Allow rspec-core to be used when neither rspec-mocks or
-  rspec-expectations are installed, without requiring any
-  user configuration. (Sam Phippen, Myron Marston, #1615)
-* Don't filter out gems from backtraces by default. (The RSpec
-  gems will still be filtered). User feedback has indicated
-  that including gems in default backtraces will be useful.
-  (Myron Marston, #1641)
-* Add new `config.filter_gems_from_backtrace "rack", "rake"` API
-  to easily filter the named gems from backtraces. (Myron Marston, #1682)
-* Fix default backtrace filters so that the RSpec binary is
-  excluded when installing RSpec as a bundler `:git` dependency.
-  (Myron Marston, #1648)
-* Simplify command generated by the rake task so that it no longer
-  includes unnecessary `-S`. (Myron Marston, #1559)
-* Add `--exclude-pattern` CLI option, `config.exclude_pattern =` config
-  option and `task.exclude_pattern =` rake task config option. Matching
-  files will be excluded. (John Gesimondo, Myron Marston, #1651, #1671)
-* When an around hook fails to execute the example, mark it as
-  pending (rather than passing) so the user is made aware of the
-  fact that the example did not actually run. (Myron Marston, #1660)
-* Remove dependency on `FileUtils` from the standard library so that users do
-  not get false positives where their code relies on it but they are not
-  requiring it. (Sam Phippen, #1565)
-
-Bug Fixes:
-
-* Fix rake task `t.pattern =` option so that it does not run all specs
-  when it matches no files, by passing along a `--pattern` option to
-  the `rspec` command, rather than resolving the file list and passing
-  along the files individually. (Evgeny Zislis, #1653)
-* Fix rake task default pattern so that it follows symlinks properly.
-  (Myron Marston, #1672)
-* Fix default pattern used with `rspec` command so that it follows
-  symlinks properly. (Myron Marston, #1672)
-* Change how we assign constant names to example group classes so that
-  it avoids a problem with `describe "Core"`. (Daniela Wellisz, #1679)
-* Handle rendering exceptions that have a different encoding than that
-  of their original source file. (Jon Rowe, #1681)
-* Allow access to message_lines without colour for failed examples even
-  when they're part of a shared example group. (tomykaira, #1689)
-
-### 3.0.4 / 2014-08-14
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.0.3...v3.0.4)
-
-Bug Fixes:
-
-* Fix processing order of CLI options so that if `config.files_to_run`
-  is accessed from a file loaded by `--require`, `--pattern` is still
-  applied. (Myron Marston, #1652)
-* Fix `config.pattern=` so that it still takes affect even if
-  `config.files_to_run` has already been accessed. (Myron Marston, #1652)
-
-### 3.0.3 / 2014-07-21
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.0.2...v3.0.3)
-
-Bug Fixes:
-
-* Properly convert both parts of a description into strings before
-  concatenation.  (@nicklink483, #1636)
-* Exclude the working directory when figuring out folders to ignore.
-  (Jon Rowe, Myron Marston, #1616)
-* Allow `::RSpec::Core::Notifications::FailedExampleNotification#message_lines`
-  to be accessed without a colouriser. (@tomykaira, #1637)
-
-### 3.0.2 / 2014-06-19
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.0.1...v3.0.2)
-
-Bug Fixes:
-
-* Fix regression in CLI option handling that prevented `--tag slow`
-  passed at the command line from overriding `--tag ~slow` in `.rspec`.
-  (Colin Jones, #1602)
-* Fix metadata `:example_group` deprecation warning so that it gets
-  issued at the call site of the configuration that specified it as
-  a filter rather than later when an example group is defined.
-  (Myron Marston, #1562)
-* Make the line that is printed when a shared example group fails indicating
-  where the concrete example group is white, separating it from the stack trace
-  that is produced for the failure. (Sam Phippen, Jon Rowe, #1606)
-
-### 3.0.1 / 2014-06-12
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.0.0...v3.0.1)
-
-Bug Fixes:
-
-* Fix a couple ruby warnings caused by rspec-core when loaded.
-  (Prem Sichanugrist, #1584)
-* Example groups named `Config` will no longer cause a Ruby warning to be
-  issued. (Jimmy Cuadra, #1580)
-
-### 3.0.0 / 2014-06-01
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.0.0.rc1...v3.0.0)
-
-Bug Fixes:
-
-* Fix `BaseTextFormatter` so that it does not re-close a closed output
-  stream. (Myron Marston)
-* Fix regression in metadata that caused the metadata hash of a top-level
-  example group to have a `:parent_example_group` key even though it has
-  no parent example group. (Myron Marston)
-
-Enhancements:
-
-* Alter the default `spec_helper.rb` to no longer recommend
-  `config.full_backtrace = true` see #1536 for discussion. (Jon Rowe)
-
-### 3.0.0.rc1 / 2014-05-18
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.0.0.beta2...v3.0.0.rc1)
-
-Breaking Changes for 3.0.0:
-
-* Change `described_class` so that in a nested group like `describe
-  MyClass`, it returns `MyClass` rather than the outer group's described
-  class. (Myron Marston)
-* Refactor filter manager so that it no longer subclasses Hash and has a
-  tighter, more domain-specific interface. (Sergey Pchelincev)
-* Remove legacy colours definitions from `BaseTextFormatter`. (Jon Rowe)
-* Remove console color definitions from `BaseTextFormatter`. (Jon Rowe)
-* Restructure example group metadata so that the computed keys are
-  exposed directly off of the metadata hash rather than being on
-  a nested `:example_group` subhash. In addition, the parent example
-  group metadata is now available as `[:parent_example_group]` rather
-  than `[:example_group][:example_group]`. Deprecated access via the
-  old key structure is still provided. (Myron Marston)
-* Remove `:describes` metadata key. It duplicates `:described_class`
-  for no good reason. Deprecated access via `:describes` is still
-  provided. (Myron Marston)
-* Rename `:example_group_block` metadata key to `:block`.
-  (Myron Marston)
-* Remove deprecated `RSpec::Core::Example#options`. (Myron Marston)
-* Move `BaseTextFormatter#colorize_summary` to `SummaryNotification#colorize_with`
-  (Jon Rowe).
-* `describe some_hash` treated `some_hash` as metadata in RSpec 2.x but
-  will treat it as the described object in RSpec 3.0. Metadata must
-  always come after the description args. (Myron Marston)
-* Remove deprecated `display_name` alias of `ExampleGroup.description`.
-  (Myron Marston)
-* Remove deprecated `describes` alias of `ExampleGroup.described_class`.
-  (Myron Marston)
-* Remove deprecated `RSpec::Core::ExampleGroup.alias_it_behaves_like_to`.
-  Use `RSpec::Core::Configuration#alias_it_behaves_like_to` instead.
-  (Myron Marston)
-* Remove deprecated `RSpec::Core::ExampleGroup.alias_example_to`.
-  Use `RSpec::Core::Configuration#alias_example_to` instead.
-  (Myron Marston)
-* Removed `focused` example alias and change example/group aliases
-  `fit`, `focus`, `fcontext` and `fdescribe` to no longer include
-  `:focused => true` metadata. They only contain `:focus => true`
-  metadata now. This means that you will need to filter them with
-  `filter_run :focus`, not `filter_run :focused`. (Myron Marston)
-* Remove `--line-number` filtering. It's semantically dubious since it's
-  a global filter (potentially applied to multiple files) but there's no
-  meaningful connection between the same line number in multiple files.
-  Instead use the `rspec path/to/spec.rb:23:46` form, which is terser
-  and makes more sense as it is scoped to a file. (Myron Marston)
-* Remove `--default_path` as an alias for `--default-path`. (Jon Rowe)
-* Remove deprecated `share_examples_for`. There's still
-  `shared_examples` and `shared_examples_for`. (Myron Marston)
-* Rename `RSpec::Core::Configuration#warnings` to
-  `RSpec::Core::Configuration#warnings?` since it's a boolean flag.
-  (Myron Marston)
-* RSpec's global state is no longer reset after a spec run. This gives
-  more flexibility to alternate runners to decide when and if they
-  want the state reset. Alternate runners are now responsible for
-  calling this (or doing a similar reset) if they are going to run
-  the spec suite multiple times in the same process. (Sam Phippen)
-* Merge `RSpec::Core::CommandLine` (never formally declared public)
-  into `RSpec::Core::Runner`. (Myron Marston)
-* Remove `color_enabled` as an alias of `color`. (Jon Rowe)
-* Remove `backtrace_cleaner` as an alias of `backtrace_formatter`. (Jon Rowe)
-* Remove `filename_pattern` as an alias of `pattern`. (Jon Rowe)
-* Extract support for legacy formatters to `rspec-legacy_formatters`. (Jon Rowe)
-* `RSpec::Configuration#formatters` now returns a dup to prevent mutation. (Jon Rowe)
-* Replace `stdlib` as an available expectation framework with `test_unit` and
-  `minitest`. (Aaron Kromer)
-* Remove backtrace formatting helpers from `BaseTextFormatter`. (Jon Rowe)
-* Extract profiler support to `ProfileFormatter` and `ProfileNotification`.
-  Formatters should implement `dump_profile` if they wish to respond to `--profile`.
-  (Jon Rowe)
-* Extract remaining formatter state to reporter and notifications. Introduce
-  `ExamplesNotification` to share information about examples that was previously
-  held in `BaseFormatter`. (Jon Rowe)
-
-Enhancements:
-
-* Add `config.default_formatter` attribute, which can be used to set a
-  formatter which will only be used if no other formatter is set
-  (e.g. via `--formatter`). (Myron Marston)
-* Support legacy colour definitions in `LegacyFormatterAdaptor`. (Jon Rowe)
-* Migrate `execution_result` (exposed by metadata) from a hash to a
-  first-class object with appropriate attributes. `status` is now
-  stored and returned as a symbol rather than a string. It retains
-  deprecated hash behavior for backwards compatibility. (Myron Marston)
-* Provide console code helper for formatters. (Jon Rowe)
-* Use raw ruby hashes for the metadata hashes rather than a subclass of
-  a hash. Computed metadata entries are now computed in advance rather
-  than being done lazily on first access. (Myron Marston)
-* Add `:block` metadata entry to the example metadata, bringing
-  parity with `:block` in the example group metadata. (Myron Marston)
-* Add `fspecify` and `fexample` as aliases of `specify` and `example`
-  with `:focus => true` metadata for parity with `fit`. (Myron Marston)
-* Add legacy support for `colorize_summary`. (Jon Rowe)
-* Restructure runner so it can be more easily customized in a subclass
-  for an alternate runner. (Ben Hoskings)
-* Document `RSpec::Core::ConfigurationOptions` as an officially
-  supported public API. (Myron Marston)
-* Add `--deprecation-out` CLI option which directs deprecation warnings
-  to the named file. (Myron Marston)
-* Minitest 5 compatability for `expect_with :stdlib` (now available as
-  `expect_with :minitest`). (Xavier Shay)
-* Reporter now notifies formatters of the load time of RSpec and your
-  specs via `StartNotification` and `SummaryNotification`. (Jon Rowe)
-* Add `disable_monkey_patching!` config option that disables all monkey
-  patching from whatever pieces of RSpec you use. (Alexey Fedorov)
-* Add `Pathname` support for setting all output streams. (Aaron Kromer)
-* Add `config.define_derived_metadata`, which can be used to apply
-  additional metadata to all groups or examples that match a given
-  filter. (Myron Marston)
-* Provide formatted and colorized backtraces via `FailedExampleNotification`
-  and send `PendingExampleFixedNotifications` when the error is due to a
-  passing spec you expect to fail. (Jon Rowe)
-* Add `dump_profile` to formatter API to allow formatters to implement
-  support for `--profile`. (Jon Rowe)
-* Allow colourising text via `ConsoleCodes` with RSpec 'states'
-  (e.g. `:success`, `:failure`) rather than direct colour codes. (Jon Rowe)
-* Expose `fully_formatted` methods off the formatter notification objects
-  that make it easy for a custom formatter to produce formatted output
-  like rspec-core's. (Myron Marston)
-
-Bug Fixes:
-
-* Fix `spec_helper.rb` file generated by `rspec --init` so that the
-  recommended settings correctly use the documentation formatter
-  when running one file. (Myron Marston)
-* Fix ordering problem where descriptions were generated after
-  tearing down mocks, which resulted in unexpected exceptions.
-  (Bradley Schaefer, Aaron Kromer, Andrey Savchenko)
-* Allow a symbol to be used as an implicit subject (e.g. `describe
-  :foo`). (Myron Marston)
-* Prevent creating an isolated context (i.e. using `RSpec.describe`) when
-  already inside a context. There is no reason to do this, and it could
-  potentially cause unexpected bugs. (Xavier Shay)
-* Fix shared example group scoping so that when two shared example
-  groups share the same name at different levels of nested contexts,
-  the one in the nearest context is used. (Myron Marston)
-* Fix `--warnings` option so that it enables warnings immediately so
-  that it applies to files loaded by `--require`. (Myron Marston)
-* Issue a warning when you set `config.deprecation_stream` too late for
-  it to take effect because the reporter has already been setup. (Myron Marston)
-* Add the full `RSpec::Core::Example` interface to the argument yielded
-  to `around` hooks. (Myron Marston)
-* Line number always takes precendence when running specs with filters.
-  (Xavier Shay)
-* Ensure :if and :unless metadata filters are treated as a special case
-  and are always in-effect. (Bradley Schaefer)
-* Ensure the currently running installation of RSpec is used when
-  the rake task shells out to `rspec`, even if a newer version is also
-  installed. (Postmodern)
-* Using a legacy formatter as default no longer causes an infinite loop.
-  (Xavier Shay)
-
-### 3.0.0.beta2 / 2014-02-17
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v3.0.0.beta1...v3.0.0.beta2)
-
-Breaking Changes for 3.0.0:
-
-* Make `mock_with` option more strict. Strings are no longer supported
-  (e.g. `mock_with "mocha"`) -- use a symbol instead. Also, unrecognized
-  values will now result in an error rather than falling back to the
-  null mocking adapter. If you want to use the null mocking adapter,
-  use `mock_with :nothing` (as has been documented for a long time).
-  (Myron Marston)
-* Remove support for overriding RSpec's built-in `:if` and `:unless`
-  filters. (Ashish Dixit)
-* Custom formatters are now required to call
-  `RSpec::Core::Formatters.register(formatter_class, *notifications)`
-  where `notifications` is the list of events the formatter wishes to
-  be notified about. Notifications are handled by methods matching the
-  names on formatters. This allows us to add or remove notifications
-  without breaking existing formatters. (Jon Rowe)
-* Change arguments passed to formatters. Rather than passing multiple
-  arguments (which limits are ability to add additional arguments as
-  doing so would break existing formatters), we now pass a notification
-  value object that exposes the same data via attributes. This will
-  allow us to add new bits of data to a notification event without
-  breaking existing formatters. (Jon Rowe)
-* Remove support for deprecated `:alias` option for
-  `RSpec.configuration.add_setting`. (Myron Marston)
-* Remove support for deprecated `RSpec.configuration.requires = [...]`.
-  (Myron Marston)
-* Remove support for deprecated `--formatter` CLI option. (Myron Marston)
-* Remove support for deprecated `--configure` CLI option. (Myron Marston)
-* Remove support for deprecated `RSpec::Core::RakeTask#spec_opts=`.
-  (Myron Marston)
-* An example group level `pending` block or `:pending` metadata now executes
-  the example and cause a failure if it passes, otherwise it will be pending if
-  it fails. The old "never run" behaviour is still used for `xexample`, `xit`,
-  and `xspecify`, or via a new `skip` method or `:skip` metadata option.
-  (Xavier Shay)
-* After calling `pending` inside an example, the remainder of the example will
-  now be run. If it passes a failure is raised, otherwise the example is marked
-  pending. The old "never run" behaviour is provided a by a new `skip` method.
-  (Xavier Shay)
-* Pending blocks inside an example have been removed as a feature with no
-  direct replacement. Use `skip` or `pending` without a block. (Xavier Shay)
-* Pending statement is no longer allowed in `before(:all)` hooks. Use `skip`
-  instead.  (Xavier Shay)
-* Remove `show_failures_in_pending_blocks` configuration option. (Xavier Shay)
-* Remove support for specifying the documentation formatter using
-  's', 'n', 'spec' or 'nested'. (Jon Rowe)
-
-Enhancements:
-
-* Add example run time to JSON formatter output. (Karthik Kastury)
-* Add more suggested settings to the files generated by
-  `rspec --init`. (Myron Marston)
-* Add `config.alias_example_group_to`, which can be used to define a
-  new method that defines an example group with the provided metadata.
-  (Michi Huber)
-* Add `xdescribe` and `xcontext` as shortcuts to skip an example group.
-  (Myron Marston)
-* Add `fdescribe` and `fcontext` as shortcuts to focus an example group.
-  (Myron Marston)
-* Don't autorun specs via `#at_exit` by default. `require 'rspec/autorun'`
-  is only needed when running specs via `ruby`, as it always has been.
-  Running specs via `rake` or `rspec` are both unaffected. (Ben Hoskings)
-* Add `expose_dsl_globally` config option, defaulting to true. When disabled
-  it will remove the monkey patches rspec-core adds to `main` and `Module`
-  (e.g. `describe`, `shared_examples_for`, etc).  (Jon Rowe)
-* Expose RSpec DSL entry point methods (`describe`,
-  `shared_examples_for`, etc) on the `RSpec` constant. Intended for use
-  when `expose_dsl_globally` is set to `false`. (Jon Rowe)
-* For consistency, expose all example group aliases (including
-  `context`) on the `RSpec` constant. If `expose_dsl_globally` is set to
-  `true`, also expose them on `main` and `Module`. Historically, only `describe`
-  was exposed. (Jon Rowe, Michi Huber)
-* Add hook scope `:example` as an alias for `:each`, and `:context` as an alias
-  for `:all`. (John Feminella)
-
-Bug Fixes:
-
-* Fix failure (undefined method `path`) in end-of-run summary
-  when `raise_errors_for_deprecations!` is configured. (Myron Marston)
-* Issue error when attempting to use `-i` or `--I` on command line,
-  too close to `-I` to be considered short hand for `--init`. (Jon Rowe)
-* Prevent adding formatters to an output target if the same
-  formatter has already been added to that output. (Alex Peattie)
-* Allow a matcher-generated example description to be used when
-  the example is pending. (Myron Marston)
-* Ensure the configured `failure_exit_code` is used by the rake
-  task when there is a failure. (Jon Rowe)
-* Restore behaviour whereby system exclusion filters take priority over working
-  directory (was broken in beta1). (Jon Rowe)
-* Prevent RSpec mangling file names that have substrings containing `line_number`
-  or `default_path`. (Matijs van Zuijlen)
-* Fix failure line detection so that it handles relative file paths
-  (which can happen when running specs through `ruby` using `rspec/autorun`).
-  (Myron Marston, #1829)
-
-### 3.0.0.beta1 / 2013-11-07
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.99.1...v3.0.0.beta1)
-
-Breaking Changes for 3.0.0:
-
-* Remove explicit support for 1.8.6. (Jon Rowe)
-* Remove `RSpec::Core::ExampleGroup#example` and
-  `RSpec::Core::ExampleGroup#running_example` methods. If you need
-  access to the example (e.g. to get its metadata), use a block arg
-  instead. (David Chelimsky)
-* Remove `TextMateFormatter`, it has been moved to `rspec-tmbundle`.
-  (Aaron Kromer)
-* Remove RCov integration. (Jon Rowe)
-* Remove deprecated support for RSpec 1 constructs (Myron Marston):
-  * The `Spec` and `Rspec` constants (rather than `RSpec`).
-  * `Spec::Runner.configure` rather than `RSpec.configure`.
-  * `Rake::SpecTask` rather than `RSpec::Core::RakeTask`.
-* Remove deprecated support for `share_as`. (Myron Marston)
-* Remove `--debug` option (and corresponding option on
-  `RSpec::Core::Configuration`). Instead, use `-r<debugger gem name>` to
-  load whichever debugger gem you wish to use (e.g. `ruby-debug`,
-  `debugger`, or `pry`). (Myron Marston)
-* Extract Autotest support to a seperate gem. (Jon Rowe)
-* Raise an error when a `let` or `subject` declaration is
-  accessed in a `before(:all)` or `after(:all)` hook. (Myron Marston)
-* Extract `its` support to a separate gem. (Peter Alfvin)
-* Disallow use of a shared example group from sibling contexts, making them
-  fully isolated. 2.14 and 2.99 allowed this but printed a deprecation warning.
-  (Jon Rowe)
-* Remove `RSpec::Core::Configuration#output` and
-  `RSpec::Core::Configuration#out` aliases of
-  `RSpec::Core::Configuration#output_stream`. (Myron Marston)
-* Remove legacy ordering APIs deprecated in 2.99.0.beta1. (Myron
-  Marston)
-
-Enhancements:
-
-* Replace unmaintained syntax gem with coderay gem. (Xavier Shay)
-* Times in profile output are now bold instead of `failure_color`.
-  (Matthew Boedicker)
-* Add `--no-fail-fast` command line option. (Gonzalo Rodríguez-Baltanás Díaz)
-* Runner now considers the local system ip address when running under Drb.
-  (Adrian CB)
-* JsonFormatter now includes `--profile` information. (Alex / @MasterLambaster)
-* Always treat symbols passed as metadata args as hash
-  keys with true values. RSpec 2 supported this with the
-  `treat_symbols_as_metadata_keys_with_true_values` but
-  now this behavior is always enabled. (Myron Marston)
-* Add `--dry-run` option, which prints the formatter output
-  of your suite without running any examples or hooks.
-  (Thomas Stratmann, Myron Marston)
-* Document the configuration options and default values in the `spec_helper.rb`
-  file that is generated by RSpec. (Parker Selbert)
-* Give generated example group classes a friendly name derived
-  from the docstring, rather than something like "Nested_2".
-  (Myron Marston)
-* Avoid affecting randomization of user code when shuffling
-  examples so that users can count on their own seeds
-  working. (Travis Herrick)
-* Ordering is no longer a single global property of the test suite.
-  Each group can pick an ordering using `:order` metadata. (Andy
-  Lindeman, Sam Phippen, Myron Marston)
-* Allow named custom ordering strategies to be registered, which can
-  then be used on individual example groups. (Andy Lindeman, Sam
-  Phippen, Myron Marston)
-
-Deprecations:
-
-* `treat_symbols_as_metadata_keys_with_true_values` is deprecated and no
-  longer has an affect now that the behavior it enabled is always
-  enabled. (Myron Marston)
-
-### 2.99.2 / 2014-08-19
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.99.1...v2.99.2)
-
-Enhancements:
-
-* Improve deprecation warning for RSpec 3 change in `describe <a symbol>`
-  behavior. (Jon Rowe, #1667)
-
-### 2.99.1 / 2014-06-19
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.99.0...v2.99.1)
-
-Bug Fixes:
-
-* Add missing deprecation warning for when `RSpec::Core::Runner` is used
-  multiple times in the same process. In 2.x RSpec's global state was
-  automatically cleared between runs but in 3.0 you need to call `RSpec.reset`
-  manually in these situations. (Sam Phippen, #1587)
-* Prevent deprecation being accidentally issues when doubles used with `be_`
-  matchers due to automatically generated descriptions. (Jon Rowe, #1573)
-* Load `rspec/core` when loading `rspec/core/rake_task` to ensure we can
-  issue deprecations correctly. (Jon Rowe, #1612)
-
-### 2.99.0 / 2014-06-01
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.99.0.rc1...v2.99.0)
-
-Bug Fixes:
-
-* Fix `BaseTextFormatter` so that it does not re-close a closed output
-  stream. (Myron Marston)
-* Use `RSpec::Configuration#backtrace_exclusion_patterns` rather than the
-  deprecated `RSpec::Configuration#backtrace_clean_patterns` when mocking
-  with rr. (David Dollar)
-
-### 2.99.0.rc1 / 2014-05-18
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.99.0.beta2...v2.99.0.rc1)
-
-Enhancements:
-
-* Add `--deprecation-out` CLI option which directs deprecation warnings
-  to the named file. (Myron Marston)
-* Backport support for `skip` in metadata to skip execution of an example.
-  (Xavier Shay, #1472)
-* Add `Pathname` support for setting all output streams. (Aaron Kromer)
-* Add `test_unit` and `minitest` expectation frameworks. (Aaron Kromer)
-
-Deprecations:
-
-* Deprecate `RSpec::Core::Pending::PendingDeclaredInExample`, use
-  `SkipDeclaredInExample` instead. (Xavier Shay)
-* Issue a deprecation when `described_class` is accessed from within
-  a nested `describe <SomeClass>` example group, since `described_class`
-  will return the innermost described class in RSpec 3 rather than the
-  outermost described class, as it behaved in RSpec 2. (Myron Marston)
-* Deprecate `RSpec::Core::FilterManager::DEFAULT_EXCLUSIONS`,
-  `RSpec::Core::FilterManager::STANDALONE_FILTERS` and use of
-  `#empty_without_conditional_filters?` on those filters. (Sergey Pchelincev)
-* Deprecate `RSpec::Core::Example#options` in favor of
-  `RSpec::Core::Example#metadata`. (Myron Marston)
-* Issue warning when passing a symbol or hash to `describe` or `context`
-  as the first argument. In RSpec 2.x this would be treated as metadata
-  but in RSpec 3 it'll be treated as the described object. To continue
-  having it treated as metadata, pass a description before the symbol or
-  hash. (Myron Marston)
-* Deprecate `RSpec::Core::BaseTextFormatter::VT100_COLORS` and
-  `RSpec::Core::BaseTextFormatter::VT100_COLOR_CODES` in favour
-  of `RSpec::Core::BaseTextFormatter::ConsoleCodes::VT100_CODES` and
-  `RSpec::Core::BaseTextFormatter::ConsoleCodes::VT100_CODE_VALUES`.
-  (Jon Rowe)
-* Deprecate `RSpec::Core::ExampleGroup.display_name` in favor of
-  `RSpec::Core::ExampleGroup.description`. (Myron Marston)
-* Deprecate `RSpec::Core::ExampleGroup.describes` in favor of
-  `RSpec::Core::ExampleGroup.described_class`. (Myron Marston)
-* Deprecate `RSpec::Core::ExampleGroup.alias_example_to` in favor of
-  `RSpec::Core::Configuration#alias_example_to`. (Myron Marston)
-* Deprecate `RSpec::Core::ExampleGroup.alias_it_behaves_like_to` in favor
-  of `RSpec::Core::Configuration#alias_it_behaves_like_to`. (Myron Marston)
-* Deprecate `RSpec::Core::ExampleGroup.focused` in favor of
-  `RSpec::Core::ExampleGroup.focus`. (Myron Marston)
-* Add deprecation warning for `config.filter_run :focused` since
-  example aliases `fit` and `focus` will no longer include
-  `:focused` metadata but will continue to include `:focus`. (Myron Marston)
-* Deprecate filtering by `:line_number` (e.g. `--line-number` from the
-  CLI). Use location filtering instead. (Myron Marston)
-* Deprecate `--default_path` as an alternative to `--default-path`. (Jon Rowe)
-* Deprecate `RSpec::Core::Configuration#warnings` in favor of
-  `RSpec::Core::Configuration#warnings?`. (Myron Marston)
-* Deprecate `share_examples_for` in favor of `shared_examples_for` or
-  just `shared_examples`. (Myron Marston)
-* Deprecate `RSpec::Core::CommandLine` in favor of
-  `RSpec::Core::Runner`. (Myron Marston)
-* Deprecate `#color_enabled`, `#color_enabled=` and `#color?` in favour of
-  `#color`, `#color=` and `#color_enabled? output`. (Jon Rowe)
-* Deprecate `#filename_pattern` in favour of `#pattern`. (Jon Rowe)
-* Deprecate `#backtrace_cleaner` in favour of `#backtrace_formatter`. (Jon Rowe)
-* Deprecate mutating `RSpec::Configuration#formatters`. (Jon Rowe)
-* Deprecate `stdlib` as an available expectation framework in favour of
-  `test_unit` and `minitest`. (Aaron Kromer)
-
-Bug Fixes:
-
-* Issue a warning when you set `config.deprecation_stream` too late for
-  it to take effect because the reporter has already been setup. (Myron Marston)
-* `skip` with a block should not execute the block. (Xavier Shay)
-
-### 2.99.0.beta2 / 2014-02-17
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.99.0.beta1...v2.99.0.beta2)
-
-Enhancements:
-
-* Add `is_expected` for one-liners that read well with the
-  `expect`-based syntax. `is_expected` is simply defined as
-  `expect(subject)` and can be used in an expression like:
-  `it { is_expected.to read_well }`. (Myron Marston)
-* Backport `skip` from RSpec 3, which acts like `pending` did in RSpec 2
-  when not given a block, since the behavior of `pending` is changing in
-  RSpec 3. (Xavier Shay)
-
-Deprecations:
-
-* Deprecate inexact `mock_with` config options. RSpec 3 will only support
-  the exact symbols `:rspec`, `:mocha`, `:flexmock`, `:rr` or `:nothing`
-  (or any module that implements the adapter interface). RSpec 2 did
-  fuzzy matching but this will not be supported going forward.
-  (Myron Marston)
-* Deprecate `show_failures_in_pending_blocks` config option. To achieve
-  the same behavior as the option enabled, you can use a custom
-  formatter instead. (Xavier Shay)
-* Add a deprecation warning for the fact that the behavior of `pending`
-  is changing in RSpec 3 -- rather than skipping the example (as it did
-  in 2.x when no block was provided), it will run the example and mark
-  it as failed if no exception is raised. Use `skip` instead to preserve
-  the old behavior. (Xavier Shay)
-* Deprecate 's', 'n', 'spec' and 'nested' as aliases for documentation
-  formatter. (Jon Rowe)
-* Deprecate `RSpec::Core::Reporter#abort` in favor of
-  `RSpec::Core::Reporter#finish`. (Jon Rowe)
-
-Bug Fixes:
-
-* Fix failure (undefined method `path`) in end-of-run summary
-  when `raise_errors_for_deprecations!` is configured. (Myron Marston)
-* Fix issue were overridding spec ordering from the command line wasn't
-  fully recognised interally. (Jon Rowe)
-
-### 2.99.0.beta1 / 2013-11-07
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.14.7...v2.99.0.beta1)
-
-Enhancements
-
-* Block-based DSL methods that run in the context of an example
-  (`it`, `before(:each)`, `after(:each)`, `let` and `subject`)
-  now yield the example as a block argument. (David Chelimsky)
-* Warn when the name of more than one example group is submitted to
-  `include_examples` and it's aliases. (David Chelimsky)
-* Add `expose_current_running_example_as` config option for
-  use during the upgrade process when external gems use the
-  deprecated `RSpec::Core::ExampleGroup#example` and
-  `RSpec::Core::ExampleGroup#running_example` methods. (Myron Marston)
-* Limit spamminess of deprecation messages. (Bradley Schaefer, Loren Segal)
-* Add `config.raise_errors_for_deprecations!` option, which turns
-  deprecations warnings into errors to surface the full backtrace
-  of the call site. (Myron Marston)
-
-Deprecations
-
-* Deprecate `RSpec::Core::ExampleGroup#example` and
-  `RSpec::Core::ExampleGroup#running_example` methods. If you need
-  access to the example (e.g. to get its metadata), use a block argument
-  instead. (David Chelimsky)
-* Deprecate use of `autotest/rspec2` in favour of `rspec-autotest`. (Jon Rowe)
-* Deprecate RSpec's built-in debugger support. Use a CLI option like
-  `-rruby-debug` (for the ruby-debug gem) or `-rdebugger` (for the
-  debugger gem) instead. (Myron Marston)
-* Deprecate `RSpec.configuration.treat_symbols_as_metadata_keys_with_true_values = false`.
-  RSpec 3 will not support having this option set to `false`. (Myron Marston)
-* Deprecate accessing a `let` or `subject` declaration in
-  a `after(:all)` hook. (Myron Marston, Jon Rowe)
-* Deprecate built-in `its` usage in favor of `rspec-its` gem due to planned
-  removal in RSpec 3. (Peter Alfvin)
-* Deprecate `RSpec::Core::PendingExampleFixedError` in favor of
-  `RSpec::Core::Pending::PendingExampleFixedError`. (Myron Marston)
-* Deprecate `RSpec::Core::Configuration#out` and
-  `RSpec::Core::Configuration#output` in favor of
-  `RSpec::Core::Configuration#output_stream`. (Myron Marston)
-* Deprecate legacy ordering APIs.
-  * You should use `register_ordering(:global)` instead of these:
-    * `RSpec::Core::Configuration#order_examples`
-    * `RSpec::Core::Configuration#order_groups`
-    * `RSpec::Core::Configuration#order_groups_and_examples`
-  * These are deprecated with no replacement because in RSpec 3
-    ordering is a property of individual example groups rather than
-    just a global property of the entire test suite:
-    * `RSpec::Core::Configuration#order`
-    * `RSpec::Core::Configuration#randomize?`
-  * `--order default` is deprecated in favor of `--order defined`
-  (Myron Marston)
-
-### 2.14.8 / 2014-02-27
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.14.7...v2.14.8)
-
-Bug fixes:
-
-* Fix regression with the `textmateformatter` that prevented backtrace links
-  from being clickable. (Stefan Daschek)
-
-### 2.14.7 / 2013-10-29
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.14.6...v2.14.7)
-
-Bug fixes:
-
-* Fix regression in 2.14.6 that broke the Fivemat formatter.
-  It depended upon either
-  `example.execution_result[:exception].pending_fixed?` (which
-  was removed in 2.14.6 to fix an issue with frozen error objects)
-  or `RSpec::Core::PendingExampleFixedError` (which was renamed
-  to `RSpec::Core::Pending::PendingExampleFixedError` in 2.8.
-  This fix makes a constant alias for the old error name.
-  (Myron Marston)
-
-### 2.14.6 / 2013-10-15
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.14.5...v2.14.6)
-
-Bug fixes:
-
-* Format stringified numbers correctly when mathn library is loaded.
-  (Jay Hayes)
-* Fix an issue that prevented the use of frozen error objects. (Lars
-  Gierth)
-
-### 2.14.5 / 2013-08-13
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.14.4...v2.14.5)
-
-Bug fixes:
-
-* Fix a `NoMethodError` that was being raised when there were no shared
-  examples or contexts declared and `RSpec.world.reset` is invoked.
-  (thepoho, Jon Rowe, Myron Marston)
-* Fix a deprecation warning that was being incorrectly displayed when
-  `shared_examples` are declared at top level in a `module` scope.
-  (Jon Rowe)
-* Fix after(:all) hooks so consecutive (same context) scopes will run even if
-  one raises an error. (Jon Rowe, Trejkaz)
-* JsonFormatter no longer dies if `dump_profile` isn't defined (Alex / @MasterLambaster, Jon Rowe)
-
-### 2.14.4 / 2013-07-21
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.14.3...v2.14.4)
-
-Bug fixes
-
-* Fix regression in 2.14: ensure configured requires (via `-r` option)
-  are loaded before spec files are loaded. This allows the spec files
-  to programatically change the file pattern (Jon Rowe).
-* Autoload `RSpec::Mocks` and `RSpec::Expectations` when referenced if
-  they are not already loaded (`RSpec::Matches` has been autoloaded
-  for a while). In the `rspec` gem, we changed it recently to stop
-  loading `rspec/mocks` and `rspec/expectations` by default, as some
-  users reported problems where they were intending to use mocha,
-  not rspec-mocks, but rspec-mocks was loaded and causing a conflict.
-  rspec-core loads mocks and expectations at the appropriate time, so
-  it seemed like a safe change -- but caused a problem for some authors
-  of libraries that integrate with RSpec. This fixes that problem.
-  (Myron Marston)
-* Gracefully handle a command like `rspec --profile path/to/spec.rb`:
-  the `path/to/spec.rb` arg was being wrongly treated as the `profile`
-  integer arg, which got cast `0` using `to_i`, causing no profiled
-  examples to be printed. (Jon Rowe)
-
-### 2.14.3 / 2013-07-13
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.14.2...v2.14.3)
-
-Bug fixes
-
-* Fix deprecation notices issued from `RSpec::Core::RakeTask` so
-  that they work properly when all of rspec-core is not loaded.
-  (This was a regression in 2.14) (Jon Rowe)
-
-### 2.14.2 / 2013-07-09
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.14.1...v2.14.2)
-
-Bug fixes
-
-* Fix regression caused by 2.14.1 release: formatters that
-  report that they `respond_to?` a notification, but had
-  no corresponding method would raise an error when registered.
-  The new fix is to just implement `start` on the deprecation
-  formatter to fix the original JRuby/ruby-debug issue.
-  (Jon Rowe)
-
-### 2.14.1 / 2013-07-08
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.14.0...v2.14.1)
-
-Bug fixes
-
-* Address deprecation formatter failure when using `ruby-debug` on
-  JRuby: fix `RSpec::Core::Reporter` to not send a notification
-  when the formatter's implementation of the notification method
-  comes from `Kernel` (Alex Portnov, Jon Rowe).
-
-### 2.14.0 / 2013-07-06
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.14.0.rc1...v2.14.0)
-
-Enhancements
-
-* Apply focus to examples defined with `fit` (equivalent of
-  `it "description", focus: true`) (Michael de Silva)
-
-Bug fix
-
-* Ensure methods defined by `let` take precedence over others
-  when there is a name collision (e.g. from an included module).
-  (Jon Rowe, Andy Lindeman and Myron Marston)
-
-### 2.14.0.rc1 / 2013-05-27
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.13.1...v2.14.0.rc1)
-
-Enhancements
-
-* Improved Windows detection inside Git Bash, for better `--color` handling.
-* Add profiling of the slowest example groups to `--profile` option.
-  The output is sorted by the slowest average example groups.
-* Don't show slow examples if there's a failure and both `--fail-fast`
-  and `--profile` options are used (Paweł Gościcki).
-* Rather than always adding `spec` to the load path, add the configured
-  `--default-path` to the load path (which defaults to `spec`). This
-  better supports folks who choose to put their specs in a different
-  directory (John Feminella).
-* Add some logic to test time duration precision. Make it a
-  function of time, dropping precision as the time increases. (Aaron Kromer)
-* Add new `backtrace_inclusion_patterns` config option. Backtrace lines
-  that match one of these patterns will _always_ be included in the
-  backtrace, even if they match an exclusion pattern, too (Sam Phippen).
-* Support ERB trim mode using the `-` when parsing `.rspec` as ERB
-  (Gabor Garami).
-* Give a better error message when let and subject are called without a block.
-  (Sam Phippen).
-* List the precedence of `.rspec-local` in the configuration documentation
-  (Sam Phippen)
-* Support `{a,b}` shell expansion syntax in `--pattern` option
-  (Konstantin Haase).
-* Add cucumber documentation for --require command line option
-  (Bradley Schaefer)
-* Expose configuration options via config:
-  * `config.libs` returns the libs configured to be added onto the load path
-  * `full_backtrace?` returns the state of the backtrace cleaner
-  * `debug?` returns true when the debugger is loaded
-  * `line_numbers` returns the line numbers we are filtering by (if any)
-  * `full_description` returns the RegExp used to filter descriptions
-  (Jon Rowe)
-* Add setters for RSpec.world and RSpec.configuration (Alex Soulim)
-* Configure ruby's warning behaviour with `--warnings` (Jon Rowe)
-* Fix an obscure issue on old versions of `1.8.7` where `Time.dup` wouldn't
-  allow access to `Time.now` (Jon Rowe)
-* Make `shared_examples_for` context aware, so that keys may be safely reused
-  in multiple contexts without colliding. (Jon Rowe)
-* Add a configurable `deprecation_stream` (Jon Rowe)
-* Publish deprecations through a formatter (David Chelimsky)
-
-Bug fixes
-
-* Make JSON formatter behave the same when it comes to `--profile` as
-  the text formatter (Paweł Gościcki).
-* Fix named subjects so that if an inner group defines a method that
-  overrides the named method, `subject` still retains the originally
-  declared value (Myron Marston).
-* Fix random ordering so that it does not cause `rand` in examples in
-  nested sibling contexts to return the same value (Max Shytikov).
-* Use the new `backtrace_inclusion_patterns` config option to ensure
-  that folks who develop code in a directory matching one of the default
-  exclusion patterns (e.g. `gems`) still get the normal backtrace
-  filtering (Sam Phippen).
-* Fix ordering of `before` hooks so that `before` hooks declared in
-  `RSpec.configure` run before `before` hooks declared in a shared
-  context (Michi Huber and Tejas Dinkar).
-* Fix `Example#full_description` so that it gets filled in by the last
-  matcher description (as `Example#description` already did) when no
-  doc string has been provided (David Chelimsky).
-* Fix the memoized methods (`let` and `subject`) leaking `define_method`
-  as a `public` method. (Thomas Holmes and Jon Rowe) (#873)
-* Fix warnings coming from the test suite. (Pete Higgins)
-
-Deprecations
-
-* Deprecate `Configuration#backtrace_clean_patterns` in favor of
-  `Configuration#backtrace_exclusion_patterns` for greater consistency
-  and symmetry with new `backtrace_inclusion_patterns` config option
-  (Sam Phippen).
-* Deprecate `Configuration#requires=` in favor of using ruby's
-  `require`. Requires specified by the command line can still be
-  accessed by the `Configuration#require` reader. (Bradley Schaefer)
-* Deprecate calling `SharedExampleGroups` defined across sibling contexts
-  (Jon Rowe)
-
-### 2.13.1 / 2013-03-12
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.13.0...v2.13.1)
-
-Bug fixes
-
-* Use hook classes as proxies rather than extending hook blocks to support
-  lambdas for before/after/around hooks. (David Chelimsky)
-* Fix regression in 2.13.0 that caused confusing behavior when overriding
-  a named subject with an unnamed subject in an inner group and then
-  referencing the outer group subject's name. The fix for this required
-  us to disallow using `super` in a named subject (which is confusing,
-  anyway -- named subjects create 2 methods, so which method on the
-  parent example group are you `super`ing to?) but `super` in an unnamed
-  subject continues to work (Myron Marston).
-* Do not allow a referenced `let` or `subject` in `before(:all)` to cause
-  other `let` declarations to leak across examples (Myron Marston).
-* Work around odd ruby 1.9 bug with `String#match` that was triggered
-  by passing it a regex from a `let` declaration. For more info, see
-  http://bugs.ruby-lang.org/issues/8059 (Aaron Kromer).
-* Add missing `require 'set'` to `base_text_formatter.rb` (Tom
-  Anderson).
-
-Deprecations
-
-* Deprecate accessing `let` or `subject` declarations in `before(:all)`.
-  These were not intended to be called in a `before(:all)` hook, as
-  they exist to define state that is reset between each example, while
-  `before(:all)` exists to define state that is shared across examples
-  in an example group (Myron Marston).
-
-### 2.13.0 / 2013-02-23
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.12.2...v2.13.0)
-
-Enhancements
-
-* Allow `--profile` option to take a count argument that
-  determines the number of slow examples to dump
-  (Greggory Rothmeier).
-* Add `subject!` that is the analog to `let!`. It defines an
-  explicit subject and sets a `before` hook that will invoke
-  the subject (Zubin Henner).
-* Fix `let` and `subject` declaration so that `super`
-  and `return` can be used in them, just like in a normal
-  method. (Myron Marston)
-* Allow output colors to be configured individually.
-  (Charlie Maffitt)
-* Always dump slow examples when `--profile` option is given,
-  even when an example failed (Myron Marston).
-
-Bug fixes
-
-* Don't blow up when dumping error output for instances
-  of anonymous error classes (Myron Marston).
-* Fix default backtrace filters so lines from projects
-  containing "gems" in the name are not filtered, but
-  lines from installed gems still are (Myron Marston).
-* Fix autotest command so that is uses double quotes
-  rather than single quotes for windows compatibility
-  (Jonas Tingeborn).
-* Fix `its` so that uses of `subject` in a `before` or `let`
-  declaration in the parent group continue to reference the
-  parent group's subject. (Olek Janiszewski)
-
-### 2.12.2 / 2012-12-13
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.12.1...v2.12.2)
-
-Bug fixes
-
-* Fix `RSpec::Core::RakeTask` so that it is compatible with rake 0.8.7
-  on ruby 1.8.7. We had accidentally broke it in the 2.12 release
-  (Myron Marston).
-* Fix `RSpec::Core::RakeTask` so it is tolerant of the `Rspec` constant
-  for backwards compatibility (Patrick Van Stee)
-
-### 2.12.1 / 2012-12-01
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.12.0...v2.12.1)
-
-Bug fixes
-
-* Specs are run even if another at\_exit hook calls `exit`. This allows
-  Test::Unit and RSpec to run together. (Suraj N. Kurapati)
-* Fix full doc string concatenation so that it handles the case of a
-  method string (e.g. "#foo") being nested under a context string
-  (e.g. "when it is tuesday"), so that we get "when it is tuesday #foo"
-  rather than "when it is tuesday#foo". (Myron Marston)
-* Restore public API I unintentionally broke in 2.12.0:
-  `RSpec::Core::Formatters::BaseFormatter#format_backtrce(backtrace, example)`
-  (Myron Marston).
-
-### 2.12.0 / 2012-11-12
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.11.1...v2.12.0)
-
-Enhancements
-
-* Add support for custom ordering strategies for groups and examples.
-  (Myron Marston)
-* JSON Formatter (Alex Chaffee)
-* Refactor rake task internals (Sam Phippen)
-* Refactor HtmlFormatter (Pete Hodgson)
-* Autotest supports a path to Ruby that contains spaces (dsisnero)
-* Provide a helpful warning when a shared example group is redefined.
-  (Mark Burns).
-* `--default_path` can be specified as `--default-line`. `--line_number` can be
-  specified as `--line-number`. Hyphens are more idiomatic command line argument
-  separators (Sam Phippen).
-* A more useful error message is shown when an invalid command line option is
-  used (Jordi Polo).
-* Add `format_docstrings { |str| }` config option. It can be used to
-  apply formatting rules to example group and example docstrings.
-  (Alex Tan)
-* Add support for an `.rspec-local` options file. This is intended to
-  allow individual developers to set options in a git-ignored file that
-  override the common project options in `.rspec`. (Sam Phippen)
-* Support for mocha 0.13.0. (Andy Lindeman)
-
-Bug fixes
-
-* Remove override of `ExampleGroup#ancestors`. This is a core ruby method that
-  RSpec shouldn't override. Instead, define `ExampleGroup#parent_groups`. (Myron
-  Marston)
-* Limit monkey patching of shared example/context declaration methods
-  (`shared_examples_for`, etc.) to just the objects that need it rather than
-  every object in the system (Myron Marston).
-* Fix Metadata#fetch to support computed values (Sam Goldman).
-* Named subject can now be referred to from within subject block in a nested
-  group (tomykaira).
-* Fix `fail_fast` so that it properly exits when an error occurs in a
-  `before(:all) hook` (Bradley Schaefer).
-* Make the order spec files are loaded consistent, regardless of the
-  order of the files returned by the OS or the order passed at
-  the command line (Jo Liss and Sam Phippen).
-* Ensure instance variables from `before(:all)` are always exposed
-  from `after(:all)`, even if an error occurs in `before(:all)`
-  (Sam Phippen).
-* `rspec --init` no longer generates an incorrect warning about `--configure`
-  being deprecated (Sam Phippen).
-* Fix pluralization of `1 seconds` (Odin Dutton)
-* Fix ANSICON url (Jarmo Pertman)
-* Use dup of Time so reporting isn't clobbered by examples that modify Time
-  without properly restoring it. (David Chelimsky)
-
-Deprecations
-
-* `share_as` is no longer needed. `shared_context` and/or
-  `RSpec::SharedContext` provide better mechanisms (Sam Phippen).
-* Deprecate `RSpec.configuration` with a block (use `RSpec.configure`).
-
-
-### 2.11.1 / 2012-07-18
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.11.0...v2.11.1)
-
-Bug fixes
-
-* Fix the way we autoload RSpec::Matchers so that custom matchers can be
-  defined before rspec-core has been configured to definitely use
-  rspec-expectations. (Myron Marston)
-* Fix typo in --help message printed for -e option. (Jo Liss)
-* Fix ruby warnings. (Myron Marston)
-* Ignore mock expectation failures when the example has already failed.
-  Mock expectation failures have always been ignored in this situation,
-  but due to my changes in 27059bf1 it was printing a confusing message.
-  (Myron Marston).
-
-### 2.11.0 / 2012-07-07
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.10.1...v2.11.0)
-
-Enhancements
-
-* Support multiple `--example` options. (Daniel Doubrovkine @dblock)
-* Named subject e.g. `subject(:article) { Article.new }`
-    * see [http://blog.davidchelimsky.net/2012/05/13/spec-smell-explicit-use-of-subject/](http://blog.davidchelimsky.net/2012/05/13/spec-smell-explicit-use-of-subject/)
-      for background.
-    * thanks to Bradley Schaefer for suggesting it and Avdi Grimm for almost
-      suggesting it.
-* `config.mock_with` and `config.expect_with` yield custom config object to a
-  block if given
-    * aids decoupling from rspec-core's configuation
-* `include_context` and `include_examples` support a block, which gets eval'd
-  in the current context (vs the nested context generated by `it_behaves_like`).
-* Add `config.order = 'random'` to the `spec_helper.rb` generated by `rspec
-  --init`.
-* Delay the loading of DRb (Myron Marston).
-* Limit monkey patching of `describe` onto just the objects that need it rather
-  than every object in the system (Myron Marston).
-
-Bug fixes
-
-* Support alternative path separators. For example, on Windows, you can now do
-  this: `rspec spec\subdir`. (Jarmo Pertman @jarmo)
-* When an example raises an error and an after or around hook does as
-  well, print out the hook error. Previously, the error was silenced and
-  the user got no feedback about what happened. (Myron Marston)
-* `--require` and `-I` are merged among different configuration sources (Andy
-  Lindeman)
-* Delegate to mocha methods instead of aliasing them in mocha adapter.
-
-### 2.10.1 / 2012-05-19
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.10.0...v2.10.1)
-
-Bug fixes
-
-* `RSpec.reset` properly reinits configuration and world
-* Call `to_s` before `split` on exception messages that might not always be
-  Strings (slyphon)
-
-### 2.10.0 / 2012-05-03
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.9.0...v2.10.0)
-
-Enhancements
-
-* Add `prepend_before` and `append_after` hooks (preethiramdev)
-    * intended for extension libs
-    * restores rspec-1 behavior
-* Reporting of profiled examples (moro)
-    * Report the total amount of time taken for the top slowest examples.
-    * Report what percentage the slowest examples took from the total runtime.
-
-Bug fixes
-
-* Properly parse `SPEC_OPTS` options.
-* `example.description` returns the location of the example if there is no
-  explicit description or matcher-generated description.
-* RDoc fixes (Grzegorz Świrski)
-* Do not modify example ancestry when dumping errors (Michael Grosser)
-
-### 2.9.0 / 2012-03-17
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.8.0...v2.9.0)
-
-Enhancements
-
-* Support for "X minutes X seconds" spec run duration in formatter. (uzzz)
-* Strip whitespace from group and example names in doc formatter.
-* Removed spork-0.9 shim. If you're using spork-0.8.x, you'll need to upgrade
-  to 0.9.0.
-
-Bug fixes
-
-* Restore `--full_backtrace` option
-* Ensure that values passed to `config.filter_run` are respected when running
-  over DRb (using spork).
-* Ensure shared example groups are reset after a run (as example groups are).
-* Remove `rescue false` from calls to filters represented as Procs
-* Ensure `described_class` gets the closest constant (pyromaniac)
-* In "autorun", don't run the specs in the `at_exit` hook if there was an
-  exception (most likely due to a SyntaxError). (sunaku)
-* Don't extend groups with modules already used to extend ancestor groups.
-* `its` correctly memoizes nil or false values (Yamada Masaki)
-
-### 2.8.0 / 2012-01-04
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.8.0.rc2...v2.8.0)
-
-Bug fixes
-
-* For metadata filtering, restore passing the entire array to the proc, rather
-  than each item in the array (weidenfreak)
-* Ensure each spec file is loaded only once
-    * Fixes a bug that caused all the examples in a file to be run when
-      referenced twice with line numbers in a command, e.g.
-        * `rspec path/to/file:37 path/to/file:42`
-
-### 2.8.0.rc2 / 2011-12-19
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.8.0.rc1...v2.8.0.rc2)
-
-Enhancments
-
-* new `--init` command (Peter Schröder)
-    * generates `spec/spec_helper.rb`
-    * deletes obsolete files (on confirmation)
-    * merged with and deprecates `--configure` command, which generated
-      `.rspec`
-* use `require_relative` when available (Ian Leitch)
-* `include_context` and `include_examples` accept params (Calvin Bascom)
-* print the time for every example in the html formatter (Richie Vos)
-* several tasty refactoring niblets (Sasha)
-* `it "does something", :x => [:foo,'bar',/baz/] (Ivan Neverov)
-    * supports matching n command line tag values with an example or group
-
-### 2.8.0.rc1 / 2011-11-06
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.7.1...v2.8.0.rc1)
-
-Enhancements
-
-* `--order` (Justin Ko)
-    * run examples in random order: `--order rand`
-    * specify the seed: `--order rand:123`
-* `--seed SEED`
-    * equivalent of `--order rand:SEED`
-* SharedContext supports `let` (David Chelimsky)
-* Filter improvements (David Chelimsky)
-    * override opposing tags from the command line
-    * override RSpec.configure tags from the command line
-    * `--line_number 37` overrides all other filters
-    * `path/to/file.rb:37` overrides all other filters
-    * refactor: consolidate filter management in a FilterManger object
-* Eliminate Ruby warnings (Matijs van Zuijlen)
-* Make reporter.report an API (David Chelimsky)
-    * supports extension tools like interative_rspec
-
-Changes
-
-* change `config.color_enabled` (getter/setter/predicate) to `color` to align
-  with `--[no]-color` CLI option.
-    * `color_enabled` is still supported for now, but will likley be deprecated
-      in a 2.x release so we can remove it in 3.0.
-
-Bug fixes
-
-* Make sure the `bar` in `--tag foo:bar` makes it to DRb (Aaron Gibralter)
-* Fix bug where full descriptions of groups nested 3 deep  were repeated.
-* Restore report of time to run to start after files are loaded.
-    * fixes bug where run times were cumalitive in spork
-    * fixes compatibility with time-series metrics
-* Don't error out when `config.mock_with` or `expect_with` is re-specifying the
-  current config (Myron Marston)
-
-* Deprecations
-    * :alias option on `configuration.add_setting`. Use `:alias_with` on the
-      original setting declaration instead.
-
-### 2.7.1 / 2011-10-20
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.7.0...v2.7.1)
-
-Bug fixes
-
-* tell autotest the correct place to find the rspec executable
-
-### 2.7.0 / 2011-10-16
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.6.4...v2.7.0)
-
-NOTE: RSpec's release policy dictates that there should not be any backward
-incompatible changes in minor releases, but we're making an exception to
-release a change to how RSpec interacts with other command line tools.
-
-As of 2.7.0, you must explicity `require "rspec/autorun"` unless you use the
-`rspec` command (which already does this for you).
-
-Enhancements
-
-* Add `example.exception` (David Chelimsky)
-* `--default_path` command line option (Justin Ko)
-* support multiple `--line_number` options (David J. Hamilton)
-    * also supports `path/to/file.rb:5:9` (runs examples on lines 5 and 9)
-* Allow classes/modules to be used as shared example group identifiers (Arthur
-  Gunn)
-* Friendly error message when shared context cannot be found (Sławosz
-  Sławiński)
-* Clear formatters when resetting config (John Bintz)
-* Add `xspecify` and xexample as temp-pending methods (David Chelimsky)
-* Add `--no-drb` option (Iain Hecker)
-* Provide more accurate run time by registering start time before code is
-  loaded (David Chelimsky)
-    * reverted in 2.8.0
-* Rake task default pattern finds specs in symlinked dirs (Kelly Felkins)
-* Rake task no longer does anything to invoke bundler since Bundler already
-  handles it for us. Thanks to Andre Arko for the tip.
-* Add `--failure-exit-code` option (Chris Griego)
-
-Bug fixes
-
-* Include `Rake::DSL` to remove deprecation warnings in Rake > 0.8.7 (Pivotal
-  Casebook)
-* Only eval `let` block once even if it returns `nil` (Adam Meehan)
-* Fix `--pattern` option (wasn't being recognized) (David Chelimsky)
-* Only implicitly `require "rspec/autorun"` with the `rspec` command (David
-  Chelimsky)
-* Ensure that rspec's `at_exit` defines the exit code (Daniel Doubrovkine)
-* Show the correct snippet in the HTML and TextMate formatters (Brian Faherty)
-
-### 2.6.4 / 2011-06-06
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.6.3...v2.6.4)
-
-NOTE: RSpec's release policy dictates that there should not be new
-functionality in patch releases, but this minor enhancement slipped in by
-accident.  As it doesn't add a new API, we decided to leave it in rather than
-roll back this release.
-
-Enhancements
-
-* Add summary of commands to run individual failed examples.
-
-Bug fixes
-
-* Support exclusion filters in DRb. (Yann Lugrin)
-* Fix --example escaping when run over DRb. (Elliot Winkler)
-* Use standard ANSI codes for color formatting so colors work in a wider set of
-  color schemes.
-
-### 2.6.3 / 2011-05-24
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.6.2...v2.6.3)
-
-Bug fixes
-
-* Explicitly convert exit code to integer, avoiding TypeError when return
-  value of run is IO object proxied by `DRb::DRbObject` (Julian Scheid)
-* Clarify behavior of `--example` command line option
-* Build using a rubygems-1.6.2 to avoid downstream yaml parsing error
-
-### 2.6.2 / 2011-05-21
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.6.1...v2.6.2)
-
-Bug fixes
-
-* Warn rather than raise when HOME env var is not defined
-* Properly merge command-line exclusions with default :if and :unless (joshcooper)
-
-### 2.6.1 / 2011-05-19
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.6.0...v2.6.1)
-
-Bug fixes
-
-* Don't extend nil when filters are nil
-* `require 'rspec/autorun'` when running rcov.
-
-### 2.6.0 / 2011-05-12
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.5.1...v2.6.0)
-
-Enhancements
-
-* `shared_context` (Damian Nurzynski)
-    * extend groups matching specific metadata with:
-        * method definitions
-        * subject declarations
-        * let/let! declarations
-        * etc (anything you can do in a group)
-* `its([:key])` works for any subject with #[]. (Peter Jaros)
-* `treat_symbols_as_metadata_keys_with_true_values` (Myron Marston)
-* Print a deprecation warning when you configure RSpec after defining an
-  example.  All configuration should happen before any examples are defined.
-  (Myron Marston)
-* Pass the exit status of a DRb run to the invoking process. This causes specs
-  run via DRb to not just return true or false. (Ilkka Laukkanen)
-* Refactoring of `ConfigurationOptions#parse_options` (Rodrigo Rosenfeld Rosas)
-* Report excluded filters in runner output (tip from andyl)
-* Clean up messages for filters/tags.
-* Restore --pattern/-P command line option from rspec-1
-* Support false as well as true in config.full_backtrace= (Andreas Tolf
-  Tolfsen)
-
-Bug fixes
-
-* Don't stumble over an exception without a message (Hans Hasselberg)
-* Remove non-ascii characters from comments that were choking rcov (Geoffrey
-  Byers)
-* Fixed backtrace so it doesn't include lines from before the autorun at_exit
-  hook (Myron Marston)
-* Include RSpec::Matchers when first example group is defined, rather than just
-  before running the examples.  This works around an obscure bug in ruby 1.9
-  that can cause infinite recursion. (Myron Marston)
-* Don't send `example_group_[started|finished]` to formatters for empty groups.
-* Get specs passing on jruby (Sidu Ponnappa)
-* Fix bug where mixing nested groups and outer-level examples gave
-  unpredictable :line_number behavior (Artur Małecki)
-* Regexp.escape the argument to --example (tip from Elliot Winkler)
-* Correctly pass/fail pending block with message expectations
-* CommandLine returns exit status (0/1) instead of true/false
-* Create path to formatter output file if it doesn't exist (marekj).
-
-
-### 2.5.1 / 2011-02-06
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.5.0...v2.5.1)
-
-NOTE: this release breaks compatibility with rspec/autotest/bundler
-integration, but does so in order to greatly simplify it.
-
-With this release, if you want the generated autotest command to include
-'bundle exec', require Autotest's bundler plugin in a .autotest file in the
-project's root directory or in your home directory:
-
-    require "autotest/bundler"
-
-Now you can just type 'autotest' on the command line and it will work as you expect.
-
-If you don't want 'bundle exec', there is nothing you have to do.
-
-### 2.5.0 / 2011-02-05
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.4.0...v2.5.0)
-
-Enhancements
-
-* Autotest::Rspec2 parses command line args passed to autotest after '--'
-* --skip-bundler option for autotest command
-* Autotest regexp fixes (Jon Rowe)
-* Add filters to html and textmate formatters (Daniel Quimper)
-* Explicit passing of block (need for JRuby 1.6) (John Firebaugh)
-
-Bug fixes
-
-* fix dom IDs in HTML formatter (Brian Faherty)
-* fix bug with --drb + formatters when not running in drb
-* include --tag options in drb args (monocle)
-* fix regression so now SPEC_OPTS take precedence over CLI options again (Roman
-  Chernyatchik)
-* only call its(:attribute) once (failing example from Brian Dunn)
-* fix bizarre bug where rspec would hang after String.alias :to_int :to_i
-  (Damian Nurzynski)
-
-Deprecations
-
-* implicit inclusion of 'bundle exec' when Gemfile present (use autotest's
-  bundler plugin instead)
-
-### 2.4.0 / 2011-01-02
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.3.1...v2.4.0)
-
-Enhancements
-
-* start the debugger on -d so the stack trace is visible when it stops
-  (Clifford Heath)
-* apply hook filtering to examples as well as groups (Myron Marston)
-* support multiple formatters, each with their own output
-* show exception classes in failure messages unless they come from RSpec
-  matchers or message expectations
-* before(:all) { pending } sets all examples to pending
-
-Bug fixes
-
-* fix bug due to change in behavior of reject in Ruby 1.9.3-dev (Shota
-  Fukumori)
-* fix bug when running in jruby: be explicit about passing block to super (John
-  Firebaugh)
-* rake task doesn't choke on paths with quotes (Janmejay Singh)
-* restore --options option from rspec-1
-* require 'ostruct' to fix bug with its([key]) (Kim Burgestrand)
-* --configure option generates .rspec file instead of autotest/discover.rb
-
-### 2.3.1 / 2010-12-16
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.3.0...v2.3.1)
-
-Bug fixes
-
-* send debugger warning message to $stdout if RSpec.configuration.error_stream
-  has not been defined yet.
-* HTML Formatter _finally_ properly displays nested groups (Jarmo Pertman)
-* eliminate some warnings when running RSpec's own suite (Jarmo Pertman)
-
-### 2.3.0 / 2010-12-12
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.2.1...v2.3.0)
-
-Enhancements
-
-* tell autotest to use "rspec2" if it sees a .rspec file in the project's root
-  directory
-    * replaces the need for ./autotest/discover.rb, which will not work with
-      all versions of ZenTest and/or autotest
-* config.expect_with
-    * :rspec          # => rspec/expectations
-    * :stdlib         # => test/unit/assertions
-    * :rspec, :stdlib # => both
-
-Bug fixes
-
-* fix dev Gemfile to work on non-mac-os machines (Lake Denman)
-* ensure explicit subject is only eval'd once (Laszlo Bacsi)
-
-### 2.2.1 / 2010-11-28
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.2.0...v2.2.1)
-
-Bug fixes
-* alias_method instead of override Kernel#method_missing (John Wilger)
-* changed --autotest to --tty in generated command (MIKAMI Yoshiyuki)
-* revert change to debugger (had introduced conflict with Rails)
-    * also restored --debugger/-debug option
-
-### 2.2.0 / 2010-11-28
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.1.0...v2.2.0)
-
-Deprecations/changes
-
-* --debug/-d on command line is deprecated and now has no effect
-* win32console is now ignored; Windows users must use ANSICON for color support
-  (Bosko Ivanisevic)
-
-Enhancements
-
-* When developing locally rspec-core now works with the rspec-dev setup or your
-  local gems
-* Raise exception with helpful message when rspec-1 is loaded alongside rspec-2
-  (Justin Ko)
-* debugger statements _just work_ as long as ruby-debug is installed
-  * otherwise you get warned, but not fired
-* Expose example.metadata in around hooks
-* Performance improvments (much faster now)
-
-Bug fixes
-
-* Make sure --fail-fast makes it across drb
-* Pass -Ilib:spec to rcov
-
-### 2.1.0 / 2010-11-07
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.0.1...v2.1.0)
-
-Enhancments
-
-* Add skip_bundler option to rake task to tell rake task to ignore the presence
-  of a Gemfile (jfelchner)
-* Add gemfile option to rake task to tell rake task what Gemfile to look for
-  (defaults to 'Gemfile')
-* Allow passing caller trace into Metadata to support extensions (Glenn
-  Vanderburg)
-* Add deprecation warning for Spec::Runner.configure to aid upgrade from
-  RSpec-1
-* Add deprecated Spec::Rake::SpecTask to aid upgrade from RSpec-1
-* Add 'autospec' command with helpful message to aid upgrade from RSpec-1
-* Add support for filtering with tags on CLI (Lailson Bandeira)
-* Add a helpful message about RUBYOPT when require fails in bin/rspec (slyphon)
-* Add "-Ilib" to the default rcov options (Tianyi Cui)
-* Make the expectation framework configurable (default rspec, of course)
-  (Justin Ko)
-* Add 'pending' to be conditional (Myron Marston)
-* Add explicit support for :if and :unless as metadata keys for conditional run
-  of examples (Myron Marston)
-* Add --fail-fast command line option (Jeff Kreeftmeijer)
-
-Bug fixes
-
-* Eliminate stack overflow with "subject { self }"
-* Require 'rspec/core' in the Raketask (ensures it required when running rcov)
-
-### 2.0.1 / 2010-10-18
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.0.0...v2.0.1)
-
-Bug fixes
-
-* Restore color when using spork + autotest
-* Pending examples without docstrings render the correct message (Josep M.
-  Bach)
-* Fixed bug where a failure in a spec file ending in anything but _spec.rb
-  would fail in a confusing way.
-* Support backtrace lines from erb templates in html formatter (Alex Crichton)
-
-### 2.0.0 / 2010-10-10
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.0.0.rc...v2.0.0)
-
-RSpec-1 compatibility
-
-* Rake task uses ENV["SPEC"] as file list if present
-
-Bug fixes
-
-* Bug Fix: optparse --out foo.txt (Leonardo Bessa)
-* Suppress color codes for non-tty output (except autotest)
-
-### 2.0.0.rc / 2010-10-05
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.0.0.beta.22...v2.0.0.rc)
-
-Enhancements
-
-* implicitly require unknown formatters so you don't have to require the file
-  explicitly on the command line (Michael Grosser)
-* add --out/-o option to assign output target
-* added fail_fast configuration option to abort on first failure
-* support a Hash subject (its([:key]) { should == value }) (Josep M. Bach)
-
-Bug fixes
-
-* Explicitly require rspec version to fix broken rdoc task (Hans de Graaff)
-* Ignore backtrace lines that come from other languages, like Java or
-  Javascript (Charles Lowell)
-* Rake task now does what is expected when setting (or not setting)
-  fail_on_error and verbose
-* Fix bug in which before/after(:all) hooks were running on excluded nested
-  groups (Myron Marston)
-* Fix before(:all) error handling so that it fails examples in nested groups,
-  too (Myron Marston)
-
-### 2.0.0.beta.22 / 2010-09-12
-
-[Full Changelog](http://github.com/rspec/rspec-core/compare/v2.0.0.beta.20...v2.0.0.beta.22)
-
-Enhancements
-
-* removed at_exit hook
-* CTRL-C stops the run (almost) immediately
-    * first it cleans things up by running the appropriate after(:all) and
-      after(:suite) hooks
-    * then it reports on any examples that have already run
-* cleaned up rake task
-    * generate correct task under variety of conditions
-    * options are more consistent
-    * deprecated redundant options
-* run 'bundle exec autotest' when Gemfile is present
-* support ERB in .rspec options files (Justin Ko)
-* depend on bundler for development tasks (Myron Marston)
-* add example_group_finished to formatters and reporter (Roman Chernyatchik)
-
-Bug fixes
-
-* support paths with spaces when using autotest (Andreas Neuhaus)
-* fix module_exec with ruby 1.8.6 (Myron Marston)
-* remove context method from top-level
-    * was conflicting with irb, for example
-* errors in before(:all) are now reported correctly (Chad Humphries)
-
-Removals
-
-* removed -o --options-file command line option
-    * use ./.rspec and ~/.rspec