depengine 0.0.31 → 3.0.0

data/etc/isolate/ruby-1.8/gems/activesupport-2.3.8/lib/active_support/vendor/tzinfo-0.3.12/tzinfo/ruby_core_support.rb

@@ -1,56 +0,0 @@
-#--
-# Copyright (c) 2008 Philip Ross
-# 
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-# 
-# The above copyright notice and this permission notice shall be included in all
-# copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#++
-
-require 'date'
-require 'rational'
-
-module TZInfo
-  
-  # Methods to support different versions of Ruby.
-  module RubyCoreSupport #:nodoc:
-  
-    # Use Rational.new! for performance reasons in Ruby 1.8.
-    # This has been removed from 1.9, but Rational performs better.        
-    if Rational.respond_to? :new!
-      def self.rational_new!(numerator, denominator = 1)
-        Rational.new!(numerator, denominator)
-      end
-    else
-      def self.rational_new!(numerator, denominator = 1)
-        Rational(numerator, denominator)
-      end
-    end
-    
-    # Ruby 1.8.6 introduced new! and deprecated new0.
-    # Ruby 1.9.0 removed new0.
-    # We still need to support new0 for older versions of Ruby.
-    if DateTime.respond_to? :new!
-      def self.datetime_new!(ajd = 0, of = 0, sg = Date::ITALY)
-        DateTime.new!(ajd, of, sg)
-      end
-    else
-      def self.datetime_new!(ajd = 0, of = 0, sg = Date::ITALY)
-        DateTime.new0(ajd, of, sg)
-      end
-    end
-  end
-end

data/etc/isolate/ruby-1.8/gems/activesupport-2.3.8/lib/active_support/vendor/tzinfo-0.3.12/tzinfo/time_or_datetime.rb

@@ -1,292 +0,0 @@
-#--
-# Copyright (c) 2006 Philip Ross
-# 
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-# 
-# The above copyright notice and this permission notice shall be included in all
-# copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#++
-
-require 'date'
-require 'time'
-require 'tzinfo/offset_rationals'
-
-module TZInfo
-  # Used by TZInfo internally to represent either a Time, DateTime or integer
-  # timestamp (seconds since 1970-01-01 00:00:00).
-  class TimeOrDateTime #:nodoc:
-    include Comparable
-    
-    # Constructs a new TimeOrDateTime. timeOrDateTime can be a Time, DateTime
-    # or an integer. If using a Time or DateTime, any time zone information is 
-    # ignored.
-    def initialize(timeOrDateTime)
-      @time = nil
-      @datetime = nil
-      @timestamp = nil
-      
-      if timeOrDateTime.is_a?(Time)
-        @time = timeOrDateTime        
-        @time = Time.utc(@time.year, @time.mon, @time.mday, @time.hour, @time.min, @time.sec) unless @time.zone == 'UTC'        
-        @orig = @time
-      elsif timeOrDateTime.is_a?(DateTime)
-        @datetime = timeOrDateTime
-        @datetime = @datetime.new_offset(0) unless @datetime.offset == 0
-        @orig = @datetime
-      else
-        @timestamp = timeOrDateTime.to_i
-        @orig = @timestamp
-      end
-    end
-    
-    # Returns the time as a Time.
-    def to_time
-      unless @time        
-        if @timestamp 
-          @time = Time.at(@timestamp).utc
-        else
-          @time = Time.utc(year, mon, mday, hour, min, sec)
-        end
-      end
-      
-      @time      
-    end
-    
-    # Returns the time as a DateTime.
-    def to_datetime
-      unless @datetime
-        @datetime = DateTime.new(year, mon, mday, hour, min, sec)
-      end
-      
-      @datetime
-    end
-    
-    # Returns the time as an integer timestamp.
-    def to_i
-      unless @timestamp
-        @timestamp = to_time.to_i
-      end
-      
-      @timestamp
-    end
-    
-    # Returns the time as the original time passed to new.
-    def to_orig
-      @orig
-    end
-    
-    # Returns a string representation of the TimeOrDateTime.
-    def to_s
-      if @orig.is_a?(Time)
-        "Time: #{@orig.to_s}"
-      elsif @orig.is_a?(DateTime)
-        "DateTime: #{@orig.to_s}"
-      else
-        "Timestamp: #{@orig.to_s}"
-      end
-    end
-    
-    # Returns internal object state as a programmer-readable string.
-    def inspect
-      "#<#{self.class}: #{@orig.inspect}>"
-    end
-    
-    # Returns the year.
-    def year
-      if @time
-        @time.year
-      elsif @datetime
-        @datetime.year
-      else
-        to_time.year
-      end
-    end
-    
-    # Returns the month of the year (1..12).
-    def mon
-      if @time
-        @time.mon
-      elsif @datetime
-        @datetime.mon
-      else
-        to_time.mon
-      end
-    end
-    alias :month :mon
-    
-    # Returns the day of the month (1..n).
-    def mday
-      if @time
-        @time.mday
-      elsif @datetime
-        @datetime.mday
-      else
-        to_time.mday
-      end
-    end
-    alias :day :mday
-    
-    # Returns the hour of the day (0..23).
-    def hour
-      if @time
-        @time.hour
-      elsif @datetime
-        @datetime.hour
-      else
-        to_time.hour
-      end
-    end
-    
-    # Returns the minute of the hour (0..59).
-    def min
-      if @time
-        @time.min
-      elsif @datetime
-        @datetime.min
-      else
-        to_time.min
-      end
-    end
-    
-    # Returns the second of the minute (0..60). (60 for a leap second).
-    def sec
-      if @time
-        @time.sec
-      elsif @datetime
-        @datetime.sec
-      else
-        to_time.sec
-      end
-    end
-    
-    # Compares this TimeOrDateTime with another Time, DateTime, integer
-    # timestamp or TimeOrDateTime. Returns -1, 0 or +1 depending whether the 
-    # receiver is less than, equal to, or greater than timeOrDateTime.
-    #
-    # Milliseconds and smaller units are ignored in the comparison.
-    def <=>(timeOrDateTime)
-      if timeOrDateTime.is_a?(TimeOrDateTime)            
-        orig = timeOrDateTime.to_orig
-        
-        if @orig.is_a?(DateTime) || orig.is_a?(DateTime)
-          # If either is a DateTime, assume it is there for a reason 
-          # (i.e. for range).
-          to_datetime <=> timeOrDateTime.to_datetime
-        elsif orig.is_a?(Time)
-          to_time <=> timeOrDateTime.to_time
-        else
-          to_i <=> timeOrDateTime.to_i
-        end        
-      elsif @orig.is_a?(DateTime) || timeOrDateTime.is_a?(DateTime)
-        # If either is a DateTime, assume it is there for a reason 
-        # (i.e. for range).        
-        to_datetime <=> TimeOrDateTime.wrap(timeOrDateTime).to_datetime
-      elsif timeOrDateTime.is_a?(Time)
-        to_time <=> timeOrDateTime
-      else
-        to_i <=> timeOrDateTime.to_i
-      end
-    end
-    
-    # Adds a number of seconds to the TimeOrDateTime. Returns a new 
-    # TimeOrDateTime, preserving what the original constructed type was.
-    # If the original type is a Time and the resulting calculation goes out of
-    # range for Times, then an exception will be raised by the Time class.
-    def +(seconds)
-      if seconds == 0
-        self
-      else
-        if @orig.is_a?(DateTime)
-          TimeOrDateTime.new(@orig + OffsetRationals.rational_for_offset(seconds))
-        else
-          # + defined for Time and integer timestamps
-          TimeOrDateTime.new(@orig + seconds)
-        end
-      end
-    end
-    
-    # Subtracts a number of seconds from the TimeOrDateTime. Returns a new 
-    # TimeOrDateTime, preserving what the original constructed type was.
-    # If the original type is a Time and the resulting calculation goes out of
-    # range for Times, then an exception will be raised by the Time class.
-    def -(seconds)
-      self + (-seconds)
-    end
-   
-    # Similar to the + operator, but for cases where adding would cause a 
-    # timestamp or time to go out of the allowed range, converts to a DateTime
-    # based TimeOrDateTime.
-    def add_with_convert(seconds)
-      if seconds == 0
-        self
-      else
-        if @orig.is_a?(DateTime)
-          TimeOrDateTime.new(@orig + OffsetRationals.rational_for_offset(seconds))
-        else
-          # A Time or timestamp.
-          result = to_i + seconds
-          
-          if result < 0 || result > 2147483647
-            result = TimeOrDateTime.new(to_datetime + OffsetRationals.rational_for_offset(seconds))
-          else
-            result = TimeOrDateTime.new(@orig + seconds)
-          end
-        end
-      end
-    end
-    
-    # Returns true if todt represents the same time and was originally 
-    # constructed with the same type (DateTime, Time or timestamp) as this 
-    # TimeOrDateTime.
-    def eql?(todt)
-      todt.respond_to?(:to_orig) && to_orig.eql?(todt.to_orig)      
-    end
-    
-    # Returns a hash of this TimeOrDateTime.
-    def hash
-      @orig.hash
-    end
-    
-    # If no block is given, returns a TimeOrDateTime wrapping the given 
-    # timeOrDateTime. If a block is specified, a TimeOrDateTime is constructed
-    # and passed to the block. The result of the block must be a TimeOrDateTime.
-    # to_orig will be called on the result and the result of to_orig will be
-    # returned.
-    #
-    # timeOrDateTime can be a Time, DateTime, integer timestamp or TimeOrDateTime.
-    # If a TimeOrDateTime is passed in, no new TimeOrDateTime will be constructed,
-    # the passed in value will be used.
-    def self.wrap(timeOrDateTime)      
-      t = timeOrDateTime.is_a?(TimeOrDateTime) ? timeOrDateTime : TimeOrDateTime.new(timeOrDateTime)        
-      
-      if block_given?
-        t = yield t
-        
-        if timeOrDateTime.is_a?(TimeOrDateTime)
-          t          
-        elsif timeOrDateTime.is_a?(Time)
-          t.to_time
-        elsif timeOrDateTime.is_a?(DateTime)
-          t.to_datetime
-        else
-          t.to_i
-        end        
-      else
-        t
-      end
-    end
-  end
-end

data/etc/isolate/ruby-1.8/gems/activesupport-2.3.8/lib/active_support/vendor/tzinfo-0.3.12/tzinfo/timezone.rb

@@ -1,508 +0,0 @@
-#--
-# Copyright (c) 2005-2006 Philip Ross
-# 
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to deal
-# in the Software without restriction, including without limitation the rights
-# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-# copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-# 
-# The above copyright notice and this permission notice shall be included in all
-# copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-# THE SOFTWARE.
-#++
-
-require 'date'
-# require 'tzinfo/country'
-require 'tzinfo/time_or_datetime'
-require 'tzinfo/timezone_period'
-
-module TZInfo
-  # Indicate a specified time in a local timezone has more than one
-  # possible time in UTC. This happens when switching from daylight savings time 
-  # to normal time where the clocks are rolled back. Thrown by period_for_local
-  # and local_to_utc when using an ambiguous time and not specifying any 
-  # means to resolve the ambiguity.
-  class AmbiguousTime < StandardError
-  end
-  
-  # Thrown to indicate that no TimezonePeriod matching a given time could be found.
-  class PeriodNotFound < StandardError
-  end
-  
-  # Thrown by Timezone#get if the identifier given is not valid.
-  class InvalidTimezoneIdentifier < StandardError
-  end
-  
-  # Thrown if an attempt is made to use a timezone created with Timezone.new(nil).
-  class UnknownTimezone < StandardError
-  end
-  
-  # Timezone is the base class of all timezones. It provides a factory method
-  # get to access timezones by identifier. Once a specific Timezone has been
-  # retrieved, DateTimes, Times and timestamps can be converted between the UTC 
-  # and the local time for the zone. For example:
-  #
-  #   tz = TZInfo::Timezone.get('America/New_York')
-  #   puts tz.utc_to_local(DateTime.new(2005,8,29,15,35,0)).to_s
-  #   puts tz.local_to_utc(Time.utc(2005,8,29,11,35,0)).to_s
-  #   puts tz.utc_to_local(1125315300).to_s
-  #
-  # Each time conversion method returns an object of the same type it was 
-  # passed.
-  #
-  # The timezone information all comes from the tz database
-  # (see http://www.twinsun.com/tz/tz-link.htm)
-  class Timezone
-    include Comparable
-    
-    # Cache of loaded zones by identifier to avoid using require if a zone
-    # has already been loaded.
-    @@loaded_zones = {}
-    
-    # Whether the timezones index has been loaded yet.
-    @@index_loaded = false
-    
-    # Returns a timezone by its identifier (e.g. "Europe/London", 
-    # "America/Chicago" or "UTC").
-    #
-    # Raises InvalidTimezoneIdentifier if the timezone couldn't be found.
-    def self.get(identifier)
-      instance = @@loaded_zones[identifier]
-      unless instance  
-        raise InvalidTimezoneIdentifier, 'Invalid identifier' if identifier !~ /^[A-z0-9\+\-_]+(\/[A-z0-9\+\-_]+)*$/
-        identifier = identifier.gsub(/-/, '__m__').gsub(/\+/, '__p__')
-        begin
-          # Use a temporary variable to avoid an rdoc warning
-          file = "tzinfo/definitions/#{identifier}"
-          require file
-          
-          m = Definitions
-          identifier.split(/\//).each {|part|
-            m = m.const_get(part)
-          }
-          
-          info = m.get
-          
-          # Could make Timezone subclasses register an interest in an info
-          # type. Since there are currently only two however, there isn't
-          # much point.
-          if info.kind_of?(DataTimezoneInfo)
-            instance = DataTimezone.new(info)
-          elsif info.kind_of?(LinkedTimezoneInfo)
-            instance = LinkedTimezone.new(info)
-          else
-            raise InvalidTimezoneIdentifier, "No handler for info type #{info.class}"
-          end
-          
-          @@loaded_zones[instance.identifier] = instance         
-        rescue LoadError, NameError => e
-          raise InvalidTimezoneIdentifier, e.message
-        end
-      end
-      
-      instance
-    end
-    
-    # Returns a proxy for the Timezone with the given identifier. The proxy
-    # will cause the real timezone to be loaded when an attempt is made to 
-    # find a period or convert a time. get_proxy will not validate the 
-    # identifier. If an invalid identifier is specified, no exception will be 
-    # raised until the proxy is used. 
-    def self.get_proxy(identifier)
-      TimezoneProxy.new(identifier)
-    end
-    
-    # If identifier is nil calls super(), otherwise calls get. An identfier 
-    # should always be passed in when called externally.
-    def self.new(identifier = nil)
-      if identifier        
-        get(identifier)
-      else
-        super()
-      end
-    end
-    
-    # Returns an array containing all the available Timezones.
-    #
-    # Returns TimezoneProxy objects to avoid the overhead of loading Timezone
-    # definitions until a conversion is actually required.
-    def self.all
-      get_proxies(all_identifiers)
-    end
-    
-    # Returns an array containing the identifiers of all the available 
-    # Timezones.
-    def self.all_identifiers
-      load_index
-      Indexes::Timezones.timezones
-    end
-    
-    # Returns an array containing all the available Timezones that are based
-    # on data (are not links to other Timezones).
-    #
-    # Returns TimezoneProxy objects to avoid the overhead of loading Timezone
-    # definitions until a conversion is actually required.
-    def self.all_data_zones
-      get_proxies(all_data_zone_identifiers)
-    end
-    
-    # Returns an array containing the identifiers of all the available 
-    # Timezones that are based on data (are not links to other Timezones)..
-    def self.all_data_zone_identifiers
-      load_index
-      Indexes::Timezones.data_timezones
-    end
-    
-    # Returns an array containing all the available Timezones that are links
-    # to other Timezones.
-    #
-    # Returns TimezoneProxy objects to avoid the overhead of loading Timezone
-    # definitions until a conversion is actually required.
-    def self.all_linked_zones
-      get_proxies(all_linked_zone_identifiers)      
-    end
-    
-    # Returns an array containing the identifiers of all the available 
-    # Timezones that are links to other Timezones.
-    def self.all_linked_zone_identifiers
-      load_index
-      Indexes::Timezones.linked_timezones
-    end
-    
-    # Returns all the Timezones defined for all Countries. This is not the
-    # complete set of Timezones as some are not country specific (e.g. 
-    # 'Etc/GMT').
-    # 
-    # Returns TimezoneProxy objects to avoid the overhead of loading Timezone
-    # definitions until a conversion is actually required.        
-    def self.all_country_zones
-      Country.all_codes.inject([]) {|zones,country|
-        zones += Country.get(country).zones
-      }
-    end
-    
-    # Returns all the zone identifiers defined for all Countries. This is not the
-    # complete set of zone identifiers as some are not country specific (e.g. 
-    # 'Etc/GMT'). You can obtain a Timezone instance for a given identifier
-    # with the get method.
-    def self.all_country_zone_identifiers
-      Country.all_codes.inject([]) {|zones,country|
-        zones += Country.get(country).zone_identifiers
-      }
-    end
-    
-    # Returns all US Timezone instances. A shortcut for 
-    # TZInfo::Country.get('US').zones.
-    #
-    # Returns TimezoneProxy objects to avoid the overhead of loading Timezone
-    # definitions until a conversion is actually required.
-    def self.us_zones
-      Country.get('US').zones
-    end
-    
-    # Returns all US zone identifiers. A shortcut for 
-    # TZInfo::Country.get('US').zone_identifiers.
-    def self.us_zone_identifiers
-      Country.get('US').zone_identifiers
-    end
-    
-    # The identifier of the timezone, e.g. "Europe/Paris".
-    def identifier
-      raise UnknownTimezone, 'TZInfo::Timezone constructed directly'
-    end
-    
-    # An alias for identifier.
-    def name
-      # Don't use alias, as identifier gets overridden.
-      identifier
-    end
-    
-    # Returns a friendlier version of the identifier.
-    def to_s
-      friendly_identifier
-    end
-    
-    # Returns internal object state as a programmer-readable string.
-    def inspect
-      "#<#{self.class}: #{identifier}>"
-    end
-    
-    # Returns a friendlier version of the identifier. Set skip_first_part to 
-    # omit the first part of the identifier (typically a region name) where
-    # there is more than one part.
-    #
-    # For example:
-    #
-    #   Timezone.get('Europe/Paris').friendly_identifier(false)          #=> "Europe - Paris"
-    #   Timezone.get('Europe/Paris').friendly_identifier(true)           #=> "Paris"
-    #   Timezone.get('America/Indiana/Knox').friendly_identifier(false)  #=> "America - Knox, Indiana"
-    #   Timezone.get('America/Indiana/Knox').friendly_identifier(true)   #=> "Knox, Indiana"           
-    def friendly_identifier(skip_first_part = false)
-      parts = identifier.split('/')
-      if parts.empty?
-        # shouldn't happen
-        identifier
-      elsif parts.length == 1        
-        parts[0]
-      else
-        if skip_first_part
-          result = ''
-        else
-          result = parts[0] + ' - '
-        end
-        
-        parts[1, parts.length - 1].reverse_each {|part|
-          part.gsub!(/_/, ' ')
-          
-          if part.index(/[a-z]/)
-            # Missing a space if a lower case followed by an upper case and the
-            # name isn't McXxxx.
-            part.gsub!(/([^M][a-z])([A-Z])/, '\1 \2')
-            part.gsub!(/([M][a-bd-z])([A-Z])/, '\1 \2')
-            
-            # Missing an apostrophe if two consecutive upper case characters.
-            part.gsub!(/([A-Z])([A-Z])/, '\1\'\2')
-          end
-          
-          result << part
-          result << ', '
-        }
-        
-        result.slice!(result.length - 2, 2)
-        result
-      end
-    end
-    
-    # Returns the TimezonePeriod for the given UTC time. utc can either be
-    # a DateTime, Time or integer timestamp (Time.to_i). Any timezone 
-    # information in utc is ignored (it is treated as a UTC time).        
-    def period_for_utc(utc)            
-      raise UnknownTimezone, 'TZInfo::Timezone constructed directly'      
-    end
-    
-    # Returns the set of TimezonePeriod instances that are valid for the given
-    # local time as an array. If you just want a single period, use 
-    # period_for_local instead and specify how ambiguities should be resolved.
-    # Returns an empty array if no periods are found for the given time.
-    def periods_for_local(local)
-      raise UnknownTimezone, 'TZInfo::Timezone constructed directly'
-    end
-    
-    # Returns the TimezonePeriod for the given local time. local can either be
-    # a DateTime, Time or integer timestamp (Time.to_i). Any timezone 
-    # information in local is ignored (it is treated as a time in the current 
-    # timezone).
-    #
-    # Warning: There are local times that have no equivalent UTC times (e.g.
-    # in the transition from standard time to daylight savings time). There are
-    # also local times that have more than one UTC equivalent (e.g. in the
-    # transition from daylight savings time to standard time).
-    #
-    # In the first case (no equivalent UTC time), a PeriodNotFound exception
-    # will be raised.
-    #
-    # In the second case (more than one equivalent UTC time), an AmbiguousTime
-    # exception will be raised unless the optional dst parameter or block
-    # handles the ambiguity. 
-    #
-    # If the ambiguity is due to a transition from daylight savings time to
-    # standard time, the dst parameter can be used to select whether the 
-    # daylight savings time or local time is used. For example,
-    #
-    #   Timezone.get('America/New_York').period_for_local(DateTime.new(2004,10,31,1,30,0))
-    #
-    # would raise an AmbiguousTime exception.
-    #
-    # Specifying dst=true would the daylight savings period from April to 
-    # October 2004. Specifying dst=false would return the standard period
-    # from October 2004 to April 2005.
-    #
-    # If the dst parameter does not resolve the ambiguity, and a block is 
-    # specified, it is called. The block must take a single parameter - an
-    # array of the periods that need to be resolved. The block can select and
-    # return a single period or return nil or an empty array
-    # to cause an AmbiguousTime exception to be raised.
-    def period_for_local(local, dst = nil)            
-      results = periods_for_local(local)
-      
-      if results.empty?
-        raise PeriodNotFound
-      elsif results.size < 2
-        results.first
-      else
-        # ambiguous result try to resolve
-        
-        if !dst.nil?
-          matches = results.find_all {|period| period.dst? == dst}
-          results = matches if !matches.empty?            
-        end
-        
-        if results.size < 2
-          results.first
-        else
-          # still ambiguous, try the block
-                    
-          if block_given?
-            results = yield results
-          end
-          
-          if results.is_a?(TimezonePeriod)
-            results
-          elsif results && results.size == 1
-            results.first
-          else          
-            raise AmbiguousTime, "#{local} is an ambiguous local time."
-          end
-        end
-      end      
-    end
-    
-    # Converts a time in UTC to the local timezone. utc can either be
-    # a DateTime, Time or timestamp (Time.to_i). The returned time has the same
-    # type as utc. Any timezone information in utc is ignored (it is treated as 
-    # a UTC time).
-    def utc_to_local(utc)
-      TimeOrDateTime.wrap(utc) {|wrapped|
-        period_for_utc(wrapped).to_local(wrapped)
-      }
-    end
-    
-    # Converts a time in the local timezone to UTC. local can either be
-    # a DateTime, Time or timestamp (Time.to_i). The returned time has the same
-    # type as local. Any timezone information in local is ignored (it is treated
-    # as a local time).
-    #
-    # Warning: There are local times that have no equivalent UTC times (e.g.
-    # in the transition from standard time to daylight savings time). There are
-    # also local times that have more than one UTC equivalent (e.g. in the
-    # transition from daylight savings time to standard time).
-    #
-    # In the first case (no equivalent UTC time), a PeriodNotFound exception
-    # will be raised.
-    #
-    # In the second case (more than one equivalent UTC time), an AmbiguousTime
-    # exception will be raised unless the optional dst parameter or block
-    # handles the ambiguity. 
-    #
-    # If the ambiguity is due to a transition from daylight savings time to
-    # standard time, the dst parameter can be used to select whether the 
-    # daylight savings time or local time is used. For example,
-    #
-    #   Timezone.get('America/New_York').local_to_utc(DateTime.new(2004,10,31,1,30,0))
-    #
-    # would raise an AmbiguousTime exception.
-    #
-    # Specifying dst=true would return 2004-10-31 5:30:00. Specifying dst=false
-    # would return 2004-10-31 6:30:00.
-    #
-    # If the dst parameter does not resolve the ambiguity, and a block is 
-    # specified, it is called. The block must take a single parameter - an
-    # array of the periods that need to be resolved. The block can return a
-    # single period to use to convert the time or return nil or an empty array
-    # to cause an AmbiguousTime exception to be raised.
-    def local_to_utc(local, dst = nil)
-      TimeOrDateTime.wrap(local) {|wrapped|
-        if block_given?
-          period = period_for_local(wrapped, dst) {|periods| yield periods }
-        else
-          period = period_for_local(wrapped, dst)
-        end
-        
-        period.to_utc(wrapped)
-      }
-    end
-    
-    # Returns the current time in the timezone as a Time.
-    def now
-      utc_to_local(Time.now.utc)
-    end
-    
-    # Returns the TimezonePeriod for the current time. 
-    def current_period
-      period_for_utc(Time.now.utc)
-    end
-    
-    # Returns the current Time and TimezonePeriod as an array. The first element
-    # is the time, the second element is the period.
-    def current_period_and_time
-      utc = Time.now.utc
-      period = period_for_utc(utc)
-      [period.to_local(utc), period]
-    end
-    
-    alias :current_time_and_period :current_period_and_time
-
-    # Converts a time in UTC to local time and returns it as a string 
-    # according to the given format. The formatting is identical to 
-    # Time.strftime and DateTime.strftime, except %Z is replaced with the
-    # timezone abbreviation for the specified time (for example, EST or EDT).        
-    def strftime(format, utc = Time.now.utc)      
-      period = period_for_utc(utc)
-      local = period.to_local(utc)      
-      local = Time.at(local).utc unless local.kind_of?(Time) || local.kind_of?(DateTime)
-      abbreviation = period.abbreviation.to_s.gsub(/%/, '%%')
-      
-      format = format.gsub(/(.?)%Z/) do
-        if $1 == '%'
-          # return %%Z so the real strftime treats it as a literal %Z too
-          '%%Z'
-        else
-          "#$1#{abbreviation}"
-        end
-      end
-      
-      local.strftime(format)
-    end
-    
-    # Compares two Timezones based on their identifier. Returns -1 if tz is less
-    # than self, 0 if tz is equal to self and +1 if tz is greater than self.
-    def <=>(tz)
-      identifier <=> tz.identifier
-    end
-    
-    # Returns true if and only if the identifier of tz is equal to the 
-    # identifier of this Timezone.
-    def eql?(tz)
-      self == tz
-    end
-    
-    # Returns a hash of this Timezone.
-    def hash
-      identifier.hash
-    end
-    
-    # Dumps this Timezone for marshalling.
-    def _dump(limit)
-      identifier
-    end
-    
-    # Loads a marshalled Timezone.
-    def self._load(data)
-      Timezone.get(data)
-    end
-    
-    private
-      # Loads in the index of timezones if it hasn't already been loaded.
-      def self.load_index
-        unless @@index_loaded
-          require 'tzinfo/indexes/timezones'
-          @@index_loaded = true
-        end        
-      end
-      
-      # Returns an array of proxies corresponding to the given array of 
-      # identifiers.
-      def self.get_proxies(identifiers)
-        identifiers.collect {|identifier| get_proxy(identifier)}
-      end
-  end        
-end