depengine 0.0.31 → 3.0.0

data/etc/isolate/jruby-1.8/gems/net-ssh-2.0.23/lib/net/ssh/buffered_io.rb

@@ -1,198 +0,0 @@
-require 'net/ssh/buffer'
-require 'net/ssh/loggable'
-require 'net/ssh/ruby_compat'
-
-module Net; module SSH
-
-  # This module is used to extend sockets and other IO objects, to allow
-  # them to be buffered for both read and write. This abstraction makes it
-  # quite easy to write a select-based event loop
-  # (see Net::SSH::Connection::Session#listen_to).
-  #
-  # The general idea is that instead of calling #read directly on an IO that
-  # has been extended with this module, you call #fill (to add pending input
-  # to the internal read buffer), and then #read_available (to read from that
-  # buffer). Likewise, you don't call #write directly, you call #enqueue to
-  # add data to the write buffer, and then #send_pending or #wait_for_pending_sends
-  # to actually send the data across the wire.
-  #
-  # In this way you can easily use the object as an argument to IO.select,
-  # calling #fill when it is available for read, or #send_pending when it is
-  # available for write, and then call #enqueue and #read_available during
-  # the idle times.
-  #
-  #   socket = TCPSocket.new(address, port)
-  #   socket.extend(Net::SSH::BufferedIo)
-  #
-  #   ssh.listen_to(socket)
-  #
-  #   ssh.loop do
-  #     if socket.available > 0
-  #       puts socket.read_available
-  #       socket.enqueue("response\n")
-  #     end
-  #   end
-  #
-  # Note that this module must be used to extend an instance, and should not
-  # be included in a class. If you do want to use it via an include, then you
-  # must make sure to invoke the private #initialize_buffered_io method in
-  # your class' #initialize method:
-  #
-  #   class Foo < IO
-  #     include Net::SSH::BufferedIo
-  #
-  #     def initialize
-  #       initialize_buffered_io
-  #       # ...
-  #     end
-  #   end
-  module BufferedIo
-    include Loggable
-
-    # Called when the #extend is called on an object, with this module as the
-    # argument. It ensures that the modules instance variables are all properly
-    # initialized.
-    def self.extended(object) #:nodoc:
-      # need to use __send__ because #send is overridden in Socket
-      object.__send__(:initialize_buffered_io)
-    end
-
-    # Tries to read up to +n+ bytes of data from the remote end, and appends
-    # the data to the input buffer. It returns the number of bytes read, or 0
-    # if no data was available to be read.
-    def fill(n=8192)
-      input.consume!
-      data = recv(n)
-      debug { "read #{data.length} bytes" }
-      input.append(data)
-      return data.length
-    end
-
-    # Read up to +length+ bytes from the input buffer. If +length+ is nil,
-    # all available data is read from the buffer. (See #available.)
-    def read_available(length=nil)
-      input.read(length || available)
-    end
-
-    # Returns the number of bytes available to be read from the input buffer.
-    # (See #read_available.)
-    def available
-      input.available
-    end
-
-    # Enqueues data in the output buffer, to be written when #send_pending
-    # is called. Note that the data is _not_ sent immediately by this method!
-    def enqueue(data)
-      output.append(data)
-    end
-
-    # Returns +true+ if there is data waiting in the output buffer, and
-    # +false+ otherwise.
-    def pending_write?
-      output.length > 0
-    end
-
-    # Sends as much of the pending output as possible. Returns +true+ if any
-    # data was sent, and +false+ otherwise.
-    def send_pending
-      if output.length > 0
-        sent = send(output.to_s, 0)
-        debug { "sent #{sent} bytes" }
-        output.consume!(sent)
-        return sent > 0
-      else
-        return false
-      end
-    end
-
-    # Calls #send_pending repeatedly, if necessary, blocking until the output
-    # buffer is empty.
-    def wait_for_pending_sends
-      send_pending
-      while output.length > 0
-        result = Net::SSH::Compat.io_select(nil, [self]) or next
-        next unless result[1].any?
-        send_pending
-      end
-    end
-
-    public # these methods are primarily for use in tests
-
-      def write_buffer #:nodoc:
-        output.to_s
-      end
-
-      def read_buffer #:nodoc:
-        input.to_s
-      end
-
-    private
-
-      #--
-      # Can't use attr_reader here (after +private+) without incurring the
-      # wrath of "ruby -w". We hates it.
-      #++
-
-      def input; @input; end
-      def output; @output; end
-
-      # Initializes the intput and output buffers for this object. This method
-      # is called automatically when the module is mixed into an object via
-      # Object#extend (see Net::SSH::BufferedIo.extended), but must be called
-      # explicitly in the +initialize+ method of any class that uses
-      # Module#include to add this module.
-      def initialize_buffered_io
-        @input = Net::SSH::Buffer.new
-        @output = Net::SSH::Buffer.new
-      end
-  end
-
-
-  
-  # Fixes for two issues by Miklós Fazekas:
-  #
-  #   * if client closes a forwarded connection, but the server is 
-  #     reading, net-ssh terminates with IOError socket closed.
-  #   * if client force closes (RST) a forwarded connection, but 
-  #     server is reading, net-ssh terminates with [an exception]
-  #
-  # See: 
-  # 
-  #    http://net-ssh.lighthouseapp.com/projects/36253/tickets/7
-  #    http://github.com/net-ssh/net-ssh/tree/portfwfix
-  #
-  module ForwardedBufferedIo
-    def fill(n=8192)
-      begin
-        super(n)
-      rescue Errno::ECONNRESET => e
-        debug { "connection was reset => shallowing exception:#{e}" }
-        return 0
-      rescue IOError => e                                 
-        if e.message =~ /closed/ then 
-          debug { "connection was reset => shallowing exception:#{e}" }
-          return 0
-        else
-          raise
-        end 
-      end
-    end
-    
-    def send_pending
-      begin
-        super                                                          
-      rescue Errno::ECONNRESET => e
-        debug { "connection was reset => shallowing exception:#{e}" }
-        return 0
-      rescue IOError => e
-        if e.message =~ /closed/ then 
-          debug { "connection was reset => shallowing exception:#{e}" }
-          return 0
-        else
-          raise
-        end
-      end
-    end
-  end
-  
-end; end

data/etc/isolate/jruby-1.8/gems/net-ssh-2.0.23/lib/net/ssh/config.rb

@@ -1,202 +0,0 @@
-module Net; module SSH
-
-  # The Net::SSH::Config class is used to parse OpenSSH configuration files,
-  # and translates that syntax into the configuration syntax that Net::SSH
-  # understands. This lets Net::SSH scripts read their configuration (to
-  # some extent) from OpenSSH configuration files (~/.ssh/config, /etc/ssh_config,
-  # and so forth).
-  #
-  # Only a subset of OpenSSH configuration options are understood:
-  #
-  # * Ciphers => maps to the :encryption option
-  # * Compression => :compression
-  # * CompressionLevel => :compression_level
-  # * ConnectTimeout => maps to the :timeout option
-  # * ForwardAgent => :forward_agent
-  # * GlobalKnownHostsFile => :global_known_hosts_file
-  # * HostBasedAuthentication => maps to the :auth_methods option
-  # * HostKeyAlgorithms => maps to :host_key option
-  # * HostKeyAlias => :host_key_alias
-  # * HostName => :host_name
-  # * IdentityFile => maps to the :keys option
-  # * Macs => maps to the :hmac option
-  # * PasswordAuthentication => maps to the :auth_methods option
-  # * Port => :port
-  # * PreferredAuthentications => maps to the :auth_methods option
-  # * ProxyCommand => maps to the :proxy option
-  # * RekeyLimit => :rekey_limit
-  # * User => :user
-  # * UserKnownHostsFile => :user_known_hosts_file
-  #
-  # Note that you will never need to use this class directly--you can control
-  # whether the OpenSSH configuration files are read by passing the :config
-  # option to Net::SSH.start. (They are, by default.)
-  class Config
-    class << self
-      @@default_files = %w(~/.ssh/config /etc/ssh_config /etc/ssh/ssh_config)
-
-      # Returns an array of locations of OpenSSH configuration files
-      # to parse by default.
-      def default_files
-        @@default_files
-      end
-
-      # Loads the configuration data for the given +host+ from all of the
-      # given +files+ (defaulting to the list of files returned by
-      # #default_files), translates the resulting hash into the options
-      # recognized by Net::SSH, and returns them.
-      def for(host, files=default_files)
-        translate(files.inject({}) { |settings, file| load(file, host, settings) })
-      end
-
-      # Load the OpenSSH configuration settings in the given +file+ for the
-      # given +host+. If +settings+ is given, the options are merged into
-      # that hash, with existing values taking precedence over newly parsed
-      # ones. Returns a hash containing the OpenSSH options. (See
-      # #translate for how to convert the OpenSSH options into Net::SSH
-      # options.)
-      def load(path, host, settings={})
-        file = File.expand_path(path)
-        return settings unless File.readable?(file)
-        
-        globals = {}
-        matched_host = nil
-        multi_host = []
-        seen_host = false
-        IO.foreach(file) do |line|
-          next if line =~ /^\s*(?:#.*)?$/
-          
-          if line =~ /^\s*(\S+)\s*=(.*)$/
-            key, value = $1, $2
-          else
-            key, value = line.strip.split(/\s+/, 2)
-          end
-
-          # silently ignore malformed entries
-          next if value.nil?
-
-          key.downcase!
-          value = $1 if value =~ /^"(.*)"$/
-          
-          value = case value.strip
-            when /^\d+$/ then value.to_i
-            when /^no$/i then false
-            when /^yes$/i then true
-            else value
-            end
-          
-          if key == 'host'
-            # Support "Host host1 host2 hostN".
-            # See http://github.com/net-ssh/net-ssh/issues#issue/6
-            multi_host = value.to_s.split(/\s+/)
-            matched_host = multi_host.select { |h| host =~ pattern2regex(h) }.first
-            seen_host = true
-          elsif !seen_host
-            if key == 'identityfile'
-              (globals[key] ||= []) << value
-            else
-              globals[key] = value unless settings.key?(key)
-            end
-          elsif !matched_host.nil?
-            if key == 'identityfile'
-              (settings[key] ||= []) << value
-            else
-              settings[key] = value unless settings.key?(key)
-            end
-          end
-        end
-        
-        settings = globals.merge(settings) if globals
-        
-        return settings
-      end
-
-      # Given a hash of OpenSSH configuration options, converts them into
-      # a hash of Net::SSH options. Unrecognized options are ignored. The
-      # +settings+ hash must have Strings for keys, all downcased, and
-      # the returned hash will have Symbols for keys.
-      def translate(settings)
-        settings.inject({}) do |hash, (key, value)|
-          case key
-          when 'ciphers' then
-            hash[:encryption] = value.split(/,/)
-          when 'compression' then
-            hash[:compression] = value
-          when 'compressionlevel' then
-            hash[:compression_level] = value
-          when 'connecttimeout' then
-            hash[:timeout] = value
-          when 'forwardagent' then
-            hash[:forward_agent] = value
-          when 'globalknownhostsfile'
-            hash[:global_known_hosts_file] = value
-          when 'hostbasedauthentication' then
-            if value
-              hash[:auth_methods] ||= []
-              hash[:auth_methods] << "hostbased"
-            end
-          when 'hostkeyalgorithms' then
-            hash[:host_key] = value.split(/,/)
-          when 'hostkeyalias' then
-            hash[:host_key_alias] = value
-          when 'hostname' then
-            hash[:host_name] = value
-          when 'identityfile' then
-            hash[:keys] = value
-          when 'macs' then
-            hash[:hmac] = value.split(/,/)
-          when 'passwordauthentication'
-            if value
-              hash[:auth_methods] ||= []
-              hash[:auth_methods] << "password"
-            end
-          when 'port'
-            hash[:port] = value
-          when 'preferredauthentications'
-            hash[:auth_methods] = value.split(/,/)
-          when 'proxycommand'
-            if value and !(value =~ /^none$/)
-              require 'net/ssh/proxy/command'
-              hash[:proxy] = Net::SSH::Proxy::Command.new(value)
-            end
-	  when 'pubkeyauthentication'
-            if value
-              hash[:auth_methods] ||= []
-              hash[:auth_methods] << "publickey"
-            end
-          when 'rekeylimit'
-            hash[:rekey_limit] = interpret_size(value)
-          when 'user'
-            hash[:user] = value
-          when 'userknownhostsfile'
-            hash[:user_known_hosts_file] = value
-          end
-          hash
-        end
-      end
-
-      private
-
-        # Converts an ssh_config pattern into a regex for matching against
-        # host names.
-        def pattern2regex(pattern)
-          pattern = "^" + pattern.to_s.gsub(/\./, "\\.").
-            gsub(/\?/, '.').
-            gsub(/([+\/])/, '\\\\\\0').
-            gsub(/\*/, '.*') + "$"
-          Regexp.new(pattern, true)
-        end
-
-        # Converts the given size into an integer number of bytes.
-        def interpret_size(size)
-          case size
-          when /k$/i then size.to_i * 1024
-          when /m$/i then size.to_i * 1024 * 1024
-          when /g$/i then size.to_i * 1024 * 1024 * 1024
-          else size.to_i
-          end
-        end
-    end
-  end
-
-end; end

data/etc/isolate/jruby-1.8/gems/net-ssh-2.0.23/lib/net/ssh/connection/channel.rb

@@ -1,630 +0,0 @@
-require 'net/ssh/loggable'
-require 'net/ssh/connection/constants'
-require 'net/ssh/connection/term'
-
-module Net; module SSH; module Connection
-
-  # The channel abstraction. Multiple "channels" can be multiplexed onto a
-  # single SSH channel, each operating independently and seemingly in parallel.
-  # This class represents a single such channel. Most operations performed
-  # with the Net::SSH library will involve using one or more channels.
-  #
-  # Channels are intended to be used asynchronously. You request that one be
-  # opened (via Connection::Session#open_channel), and when it is opened, your
-  # callback is invoked. Then, you set various other callbacks on the newly
-  # opened channel, which are called in response to the corresponding events.
-  # Programming with Net::SSH works best if you think of your programs as
-  # state machines. Complex programs are best implemented as objects that
-  # wrap a channel. See Net::SCP and Net::SFTP for examples of how complex
-  # state machines can be built on top of the SSH protocol.
-  #
-  #   ssh.open_channel do |channel|
-  #     channel.exec("/invoke/some/command") do |ch, success|
-  #       abort "could not execute command" unless success
-  #
-  #       channel.on_data do |ch, data|
-  #         puts "got stdout: #{data}"
-  #         channel.send_data "something for stdin\n"
-  #       end
-  #
-  #       channel.on_extended_data do |ch, type, data|
-  #         puts "got stderr: #{data}"
-  #       end
-  #
-  #       channel.on_close do |ch|
-  #         puts "channel is closing!"
-  #       end
-  #     end
-  #   end
-  #
-  #   ssh.loop
-  #
-  # Channels also have a basic hash-like interface, that allows programs to
-  # store arbitrary state information on a channel object. This helps simplify
-  # the writing of state machines, especially when you may be juggling
-  # multiple open channels at the same time.
-  #
-  # Note that data sent across SSH channels are governed by maximum packet
-  # sizes and maximum window sizes. These details are managed internally
-  # by Net::SSH::Connection::Channel, so you may remain blissfully ignorant
-  # if you so desire, but you can always inspect the current maximums, as
-  # well as the remaining window size, using the reader attributes for those
-  # values.
-  class Channel
-    include Constants, Loggable
-
-    # The local id for this channel, assigned by the Net::SSH::Connection::Session instance.
-    attr_reader :local_id
-
-    # The remote id for this channel, assigned by the remote host.
-    attr_reader :remote_id
-
-    # The type of this channel, usually "session".
-    attr_reader :type
-
-    # The underlying Net::SSH::Connection::Session instance that supports this channel.
-    attr_reader :connection
-
-    # The maximum packet size that the local host can receive.
-    attr_reader :local_maximum_packet_size
-
-    # The maximum amount of data that the local end of this channel can
-    # receive. This is a total, not per-packet.
-    attr_reader :local_maximum_window_size
-
-    # The maximum packet size that the remote host can receive.
-    attr_reader :remote_maximum_packet_size
-
-    # The maximum amount of data that the remote end of this channel can
-    # receive. This is a total, not per-packet.
-    attr_reader :remote_maximum_window_size
-
-    # This is the remaining window size on the local end of this channel. When
-    # this reaches zero, no more data can be received.
-    attr_reader :local_window_size
-
-    # This is the remaining window size on the remote end of this channel. When
-    # this reaches zero, no more data can be sent.
-    attr_reader :remote_window_size
-
-    # A hash of properties for this channel. These can be used to store state
-    # information about this channel. See also #[] and #[]=.
-    attr_reader :properties
-
-    # The output buffer for this channel. Data written to the channel is
-    # enqueued here, to be written as CHANNEL_DATA packets during each pass of
-    # the event loop. See Connection::Session#process and #enqueue_pending_output.
-    attr_reader :output #:nodoc:
-
-    # The list of pending requests. Each time a request is sent which requires
-    # a reply, the corresponding callback is pushed onto this queue. As responses
-    # arrive, they are shifted off the front and handled.
-    attr_reader :pending_requests #:nodoc:
-
-    # Instantiates a new channel on the given connection, of the given type,
-    # and with the given id. If a block is given, it will be remembered until
-    # the channel is confirmed open by the server, and will be invoked at
-    # that time (see #do_open_confirmation).
-    #
-    # This also sets the default maximum packet size and maximum window size.
-    def initialize(connection, type, local_id, &on_confirm_open)
-      self.logger = connection.logger
-
-      @connection = connection
-      @type       = type
-      @local_id   = local_id
-
-      @local_maximum_packet_size = 0x10000
-      @local_window_size = @local_maximum_window_size = 0x20000
-
-      @on_confirm_open = on_confirm_open
-
-      @output = Buffer.new
-
-      @properties = {}
-
-      @pending_requests = []
-      @on_open_failed = @on_data = @on_extended_data = @on_process = @on_close = @on_eof = nil
-      @on_request = {}
-      @closing = @eof = @sent_eof = false
-    end
-
-    # A shortcut for accessing properties of the channel (see #properties).
-    def [](name)
-      @properties[name]
-    end
-
-    # A shortcut for setting properties of the channel (see #properties).
-    def []=(name, value)
-      @properties[name] = value
-    end
-
-    # Syntactic sugar for executing a command. Sends a channel request asking
-    # that the given command be invoked. If the block is given, it will be
-    # called when the server responds. The first parameter will be the
-    # channel, and the second will be true or false, indicating whether the
-    # request succeeded or not. In this case, success means that the command
-    # is being executed, not that it has completed, and failure means that the
-    # command altogether failed to be executed.
-    #
-    #   channel.exec "ls -l /home" do |ch, success|
-    #     if success
-    #       puts "command has begun executing..."
-    #       # this is a good place to hang callbacks like #on_data...
-    #     else
-    #       puts "alas! the command could not be invoked!"
-    #     end
-    #   end
-    def exec(command, &block)
-      send_channel_request("exec", :string, command, &block)
-    end
-
-    # Syntactic sugar for requesting that a subsystem be started. Subsystems
-    # are a way for other protocols (like SFTP) to be run, using SSH as
-    # the transport. Generally, you'll never need to call this directly unless
-    # you are the implementor of something that consumes an SSH subsystem, like
-    # SFTP.
-    #
-    #   channel.subsystem("sftp") do |ch, success|
-    #     if success
-    #       puts "subsystem successfully started"
-    #     else
-    #       puts "subsystem could not be started"
-    #     end
-    #   end
-    def subsystem(subsystem, &block)
-      send_channel_request("subsystem", :string, subsystem, &block)
-    end
-
-    # Syntactic sugar for setting an environment variable in the remote
-    # process' environment. Note that for security reasons, the server may
-    # refuse to set certain environment variables, or all, at the server's
-    # discretion. If you are connecting to an OpenSSH server, you will
-    # need to update the AcceptEnv setting in the sshd_config to include the
-    # environment variables you want to send.
-    #
-    #   channel.env "PATH", "/usr/local/bin"
-    def env(variable_name, variable_value, &block)
-      send_channel_request("env", :string, variable_name, :string, variable_value, &block)
-    end
-
-    # A hash of the valid PTY options (see #request_pty).
-    VALID_PTY_OPTIONS = { :term        => "xterm",
-                          :chars_wide  => 80,
-                          :chars_high  => 24,
-                          :pixels_wide => 640,
-                          :pixels_high => 480,
-                          :modes       => {} }
-
-    # Requests that a pseudo-tty (or "pty") be made available for this channel.
-    # This is useful when you want to invoke and interact with some kind of
-    # screen-based program (e.g., vim, or some menuing system).
-    #
-    # Note, that without a pty some programs (e.g. sudo, or subversion) on
-    # some systems, will not be able to run interactively, and will error
-    # instead of prompt if they ever need some user interaction.
-    #
-    # Note, too, that when a pty is requested, user's shell configuration
-    # scripts (.bashrc and such) are not run by default, whereas they are
-    # run when a pty is not present.
-    #
-    #   channel.request_pty do |ch, success|
-    #     if success
-    #       puts "pty successfully obtained"
-    #     else
-    #       puts "could not obtain pty"
-    #     end
-    #   end
-    def request_pty(opts={}, &block)
-      extra = opts.keys - VALID_PTY_OPTIONS.keys
-      raise ArgumentError, "invalid option(s) to request_pty: #{extra.inspect}" if extra.any?
-
-      opts = VALID_PTY_OPTIONS.merge(opts)
-
-      modes = opts[:modes].inject(Buffer.new) do |memo, (mode, data)|
-        memo.write_byte(mode).write_long(data)
-      end
-      # mark the end of the mode opcode list with a 0 byte
-      modes.write_byte(0)
-
-      send_channel_request("pty-req", :string, opts[:term],
-        :long, opts[:chars_wide], :long, opts[:chars_high],
-        :long, opts[:pixels_wide], :long, opts[:pixels_high],
-        :string, modes.to_s, &block)
-    end
-
-    # Sends data to the channel's remote endpoint. This usually has the
-    # effect of sending the given string to the remote process' stdin stream.
-    # Note that it does not immediately send the data across the channel,
-    # but instead merely appends the given data to the channel's output buffer,
-    # preparatory to being packaged up and sent out the next time the connection
-    # is accepting data. (A connection might not be accepting data if, for
-    # instance, it has filled its data window and has not yet been resized by
-    # the remote end-point.)
-    #
-    # This will raise an exception if the channel has previously declared
-    # that no more data will be sent (see #eof!).
-    #
-    #   channel.send_data("the password\n")
-    def send_data(data)
-      raise EOFError, "cannot send data if channel has declared eof" if eof?
-      output.append(data.to_s)
-    end
-
-    # Returns true if the channel exists in the channel list of the session,
-    # and false otherwise. This can be used to determine whether a channel has
-    # been closed or not.
-    #
-    #   ssh.loop { channel.active? }
-    def active?
-      connection.channels.key?(local_id)
-    end
-
-    # Runs the SSH event loop until the channel is no longer active. This is
-    # handy for blocking while you wait for some channel to finish.
-    #
-    #   channel.exec("grep ...") { ... }
-    #   channel.wait
-    def wait
-      connection.loop { active? }
-    end
-
-    # Returns true if the channel is currently closing, but not actually
-    # closed. A channel is closing when, for instance, #close has been
-    # invoked, but the server has not yet responded with a CHANNEL_CLOSE
-    # packet of its own.
-    def closing?
-      @closing
-    end
-
-    # Requests that the channel be closed. If the channel is already closing,
-    # this does nothing, nor does it do anything if the channel has not yet
-    # been confirmed open (see #do_open_confirmation). Otherwise, it sends a
-    # CHANNEL_CLOSE message and marks the channel as closing.
-    def close
-      return if @closing
-      if remote_id
-        @closing = true
-        connection.send_message(Buffer.from(:byte, CHANNEL_CLOSE, :long, remote_id))
-      end
-    end
-
-    # Returns true if the local end of the channel has declared that no more
-    # data is forthcoming (see #eof!). Trying to send data via #send_data when
-    # this is true will result in an exception being raised.
-    def eof?
-      @eof
-    end
-
-    # Tells the remote end of the channel that no more data is forthcoming
-    # from this end of the channel. The remote end may still send data.
-    # The CHANNEL_EOF packet will be sent once the output buffer is empty.
-    def eof!
-      return if eof?
-      @eof = true
-    end
-
-    # If an #on_process handler has been set up, this will cause it to be
-    # invoked (passing the channel itself as an argument). It also causes all
-    # pending output to be enqueued as CHANNEL_DATA packets (see #enqueue_pending_output).
-    def process
-      @on_process.call(self) if @on_process
-      enqueue_pending_output
-
-      if @eof and not @sent_eof and output.empty?
-        connection.send_message(Buffer.from(:byte, CHANNEL_EOF, :long, remote_id))
-        @sent_eof = true
-      end
-    end
-
-    # Registers a callback to be invoked when data packets are received by the
-    # channel. The callback is called with the channel as the first argument,
-    # and the data as the second.
-    #
-    #   channel.on_data do |ch, data|
-    #     puts "got data: #{data.inspect}"
-    #   end
-    #
-    # Data received this way is typically the data written by the remote
-    # process to its +stdout+ stream.
-    def on_data(&block)
-      old, @on_data = @on_data, block
-      old
-    end
-
-    # Registers a callback to be invoked when extended data packets are received
-    # by the channel. The callback is called with the channel as the first
-    # argument, the data type (as an integer) as the second, and the data as
-    # the third. Extended data is almost exclusively used to send +stderr+ data
-    # (+type+ == 1). Other extended data types are not defined by the SSH
-    # protocol.
-    #
-    #   channel.on_extended_data do |ch, type, data|
-    #     puts "got stderr: #{data.inspect}"
-    #   end
-    def on_extended_data(&block)
-      old, @on_extended_data = @on_extended_data, block
-      old
-    end
-
-    # Registers a callback to be invoked for each pass of the event loop for
-    # this channel. There are no guarantees on timeliness in the event loop,
-    # but it will be called roughly once for each packet received by the
-    # connection (not the channel). This callback is invoked with the channel
-    # as the sole argument.
-    #
-    # Here's an example that accumulates the channel data into a variable on
-    # the channel itself, and displays individual lines in the input one
-    # at a time when the channel is processed:
-    #
-    #   channel[:data] = ""
-    #
-    #   channel.on_data do |ch, data|
-    #     channel[:data] << data
-    #   end
-    #
-    #   channel.on_process do |ch|
-    #     if channel[:data] =~ /^.*?\n/
-    #       puts $&
-    #       channel[:data] = $'
-    #     end
-    #   end
-    def on_process(&block)
-      old, @on_process = @on_process, block
-      old
-    end
-
-    # Registers a callback to be invoked when the server acknowledges that a
-    # channel is closed. This is invoked with the channel as the sole argument.
-    #
-    #   channel.on_close do |ch|
-    #     puts "remote end is closing!"
-    #   end
-    def on_close(&block)
-      old, @on_close = @on_close, block
-      old
-    end
-
-    # Registers a callback to be invoked when the server indicates that no more
-    # data will be sent to the channel (although the channel can still send
-    # data to the server). The channel is the sole argument to the callback.
-    #
-    #   channel.on_eof do |ch|
-    #     puts "remote end is done sending data"
-    #   end
-    def on_eof(&block)
-      old, @on_eof = @on_eof, block
-      old
-    end
-
-    # Registers a callback to be invoked when the server was unable to open
-    # the requested channel. The channel itself will be passed to the block,
-    # along with the integer "reason code" for the failure, and a textual
-    # description of the failure from the server.
-    #
-    #   channel = session.open_channel do |ch|
-    #     # ..
-    #   end
-    #
-    #   channel.on_open_failed { |ch, code, desc| ... }
-    def on_open_failed(&block)
-      old, @on_open_failed = @on_open_failed, block
-      old
-    end
-
-    # Registers a callback to be invoked when a channel request of the given
-    # type is received. The callback will receive the channel as the first
-    # argument, and the associated (unparsed) data as the second. The data
-    # will be a Net::SSH::Buffer that you will need to parse, yourself,
-    # according to the kind of request you are watching.
-    #
-    # By default, if the request wants a reply, Net::SSH will send a
-    # CHANNEL_SUCCESS response for any request that was handled by a registered
-    # callback, and CHANNEL_FAILURE for any that wasn't, but if you want your
-    # registered callback to result in a CHANNEL_FAILURE response, just raise
-    # Net::SSH::ChannelRequestFailed.
-    #
-    # Some common channel requests that your programs might want to listen
-    # for are:
-    #
-    # * "exit-status" : the exit status of the remote process will be reported
-    #   as a long integer in the data buffer, which you can grab via
-    #   data.read_long.
-    # * "exit-signal" : if the remote process died as a result of a signal
-    #   being sent to it, the signal will be reported as a string in the
-    #   data, via data.read_string. (Not all SSH servers support this channel
-    #   request type.)
-    #
-    #   channel.on_request "exit-status" do |ch, data|
-    #     puts "process terminated with exit status: #{data.read_long}"
-    #   end
-    def on_request(type, &block)
-      old, @on_request[type] = @on_request[type], block
-      old
-    end
-
-    # Sends a new channel request with the given name. The extra +data+
-    # parameter must either be empty, or consist of an even number of
-    # arguments. See Net::SSH::Buffer.from for a description of their format.
-    # If a block is given, it is registered as a callback for a pending
-    # request, and the packet will be flagged so that the server knows a
-    # reply is required. If no block is given, the server will send no
-    # response to this request. Responses, where required, will cause the
-    # callback to be invoked with the channel as the first argument, and
-    # either true or false as the second, depending on whether the request
-    # succeeded or not. The meaning of "success" and "failure" in this context
-    # is dependent on the specific request that was sent.
-    #
-    #   channel.send_channel_request "shell" do |ch, success|
-    #     if success
-    #       puts "user shell started successfully"
-    #     else
-    #       puts "could not start user shell"
-    #     end
-    #   end
-    #
-    # Most channel requests you'll want to send are already wrapped in more
-    # convenient helper methods (see #exec and #subsystem).
-    def send_channel_request(request_name, *data, &callback)
-      info { "sending channel request #{request_name.inspect}" }
-      msg = Buffer.from(:byte, CHANNEL_REQUEST,
-        :long, remote_id, :string, request_name,
-        :bool, !callback.nil?, *data)
-      connection.send_message(msg)
-      pending_requests << callback if callback
-    end
-
-    public # these methods are public, but for Net::SSH internal use only
-
-      # Enqueues pending output at the connection as CHANNEL_DATA packets. This
-      # does nothing if the channel has not yet been confirmed open (see
-      # #do_open_confirmation). This is called automatically by #process, which
-      # is called from the event loop (Connection::Session#process). You will
-      # generally not need to invoke it directly.
-      def enqueue_pending_output #:nodoc:
-        return unless remote_id
-
-        while output.length > 0
-          length = output.length
-          length = remote_window_size if length > remote_window_size
-          length = remote_maximum_packet_size if length > remote_maximum_packet_size
-
-          if length > 0
-            connection.send_message(Buffer.from(:byte, CHANNEL_DATA, :long, remote_id, :string, output.read(length)))
-            output.consume!
-            @remote_window_size -= length
-          else
-            break
-          end
-        end
-      end
-
-      # Invoked when the server confirms that a channel has been opened.
-      # The remote_id is the id of the channel as assigned by the remote host,
-      # and max_window and max_packet are the maximum window and maximum
-      # packet sizes, respectively. If an open-confirmation callback was
-      # given when the channel was created, it is invoked at this time with
-      # the channel itself as the sole argument.
-      def do_open_confirmation(remote_id, max_window, max_packet) #:nodoc:
-        @remote_id = remote_id
-        @remote_window_size = @remote_maximum_window_size = max_window
-        @remote_maximum_packet_size = max_packet
-        connection.forward.agent(self) if connection.options[:forward_agent] && type == "session"
-        @on_confirm_open.call(self) if @on_confirm_open
-      end
-
-      # Invoked when the server failed to open the channel. If an #on_open_failed
-      # callback was specified, it will be invoked with the channel, reason code,
-      # and description as arguments. Otherwise, a ChannelOpenFailed exception
-      # will be raised.
-      def do_open_failed(reason_code, description)
-        if @on_open_failed
-          @on_open_failed.call(self, reason_code, description)
-        else
-          raise ChannelOpenFailed.new(reason_code, description)
-        end          
-      end
-
-      # Invoked when the server sends a CHANNEL_WINDOW_ADJUST packet, and
-      # causes the remote window size to be adjusted upwards by the given
-      # number of bytes. This has the effect of allowing more data to be sent
-      # from the local end to the remote end of the channel.
-      def do_window_adjust(bytes) #:nodoc:
-        @remote_maximum_window_size += bytes
-        @remote_window_size += bytes
-      end
-
-      # Invoked when the server sends a channel request. If any #on_request
-      # callback has been registered for the specific type of this request,
-      # it is invoked. If +want_reply+ is true, a packet will be sent of
-      # either CHANNEL_SUCCESS or CHANNEL_FAILURE type. If there was no callback
-      # to handle the request, CHANNEL_FAILURE will be sent. Otherwise,
-      # CHANNEL_SUCCESS, unless the callback raised ChannelRequestFailed. The
-      # callback should accept the channel as the first argument, and the
-      # request-specific data as the second.
-      def do_request(request, want_reply, data) #:nodoc:
-        result = true
-
-        begin
-          callback = @on_request[request] or raise ChannelRequestFailed
-          callback.call(self, data)
-        rescue ChannelRequestFailed
-          result = false
-        end
-
-        if want_reply
-          msg = Buffer.from(:byte, result ? CHANNEL_SUCCESS : CHANNEL_FAILURE, :long, remote_id)
-          connection.send_message(msg)
-        end
-      end
-
-      # Invokes the #on_data callback when the server sends data to the
-      # channel. This will reduce the available window size on the local end,
-      # but does not actually throttle requests that come in illegally when
-      # the window size is too small. The callback is invoked with the channel
-      # as the first argument, and the data as the second.
-      def do_data(data) #:nodoc:
-        update_local_window_size(data.length)
-        @on_data.call(self, data) if @on_data
-      end
-
-      # Invokes the #on_extended_data callback when the server sends
-      # extended data to the channel. This will reduce the available window
-      # size on the local end. The callback is invoked with the channel,
-      # type, and data.
-      def do_extended_data(type, data)
-        update_local_window_size(data.length)
-        @on_extended_data.call(self, type, data) if @on_extended_data
-      end
-
-      # Invokes the #on_eof callback when the server indicates that no
-      # further data is forthcoming. The callback is invoked with the channel
-      # as the argument.
-      def do_eof
-        @on_eof.call(self) if @on_eof
-      end
-
-      # Invokes the #on_close callback when the server closes a channel.
-      # The channel is the only argument.
-      def do_close
-        @on_close.call(self) if @on_close
-      end
-
-      # Invokes the next pending request callback with +false+ as the second
-      # argument.
-      def do_failure
-        if callback = pending_requests.shift
-          callback.call(self, false)
-        else
-          error { "channel failure recieved with no pending request to handle it (bug?)" }
-        end
-      end
-
-      # Invokes the next pending request callback with +true+ as the second
-      # argument.
-      def do_success
-        if callback = pending_requests.shift
-          callback.call(self, true)
-        else
-          error { "channel success recieved with no pending request to handle it (bug?)" }
-        end
-      end
-
-    private
-
-      # Updates the local window size by the given amount. If the window
-      # size drops to less than half of the local maximum (an arbitrary
-      # threshold), a CHANNEL_WINDOW_ADJUST message will be sent to the
-      # server telling it that the window size has grown.
-      def update_local_window_size(size)
-        @local_window_size -= size
-        if local_window_size < local_maximum_window_size/2
-          connection.send_message(Buffer.from(:byte, CHANNEL_WINDOW_ADJUST,
-            :long, remote_id, :long, 0x20000))
-          @local_window_size += 0x20000
-          @local_maximum_window_size += 0x20000
-        end
-      end
-  end
-
-end; end; end