depengine 0.0.31 → 3.0.0

data/etc/isolate/jruby-1.8/gems/mail-2.2.5/lib/mail/message.rb

@@ -1,1870 +0,0 @@
-# encoding: utf-8
-module Mail
-  # The Message class provides a single point of access to all things to do with an
-  # email message.
-  # 
-  # You create a new email message by calling the Mail::Message.new method, or just
-  # Mail.new
-  # 
-  # A Message object by default has the following objects inside it:
-  # 
-  # * A Header object which contians all information and settings of the header of the email
-  # * Body object which contains all parts of the email that are not part of the header, this
-  #   includes any attachments, body text, MIME parts etc.
-  # 
-  # ==Per RFC2822
-  # 
-  #  2.1. General Description
-  # 
-  #   At the most basic level, a message is a series of characters.  A
-  #   message that is conformant with this standard is comprised of
-  #   characters with values in the range 1 through 127 and interpreted as
-  #   US-ASCII characters [ASCII].  For brevity, this document sometimes
-  #   refers to this range of characters as simply "US-ASCII characters".
-  # 
-  #   Note: This standard specifies that messages are made up of characters
-  #   in the US-ASCII range of 1 through 127.  There are other documents,
-  #   specifically the MIME document series [RFC2045, RFC2046, RFC2047,
-  #   RFC2048, RFC2049], that extend this standard to allow for values
-  #   outside of that range.  Discussion of those mechanisms is not within
-  #   the scope of this standard.
-  # 
-  #   Messages are divided into lines of characters.  A line is a series of
-  #   characters that is delimited with the two characters carriage-return
-  #   and line-feed; that is, the carriage return (CR) character (ASCII
-  #   value 13) followed immediately by the line feed (LF) character (ASCII
-  #   value 10).  (The carriage-return/line-feed pair is usually written in
-  #   this document as "CRLF".)
-  # 
-  #   A message consists of header fields (collectively called "the header
-  #   of the message") followed, optionally, by a body.  The header is a
-  #   sequence of lines of characters with special syntax as defined in
-  #   this standard. The body is simply a sequence of characters that
-  #   follows the header and is separated from the header by an empty line
-  #   (i.e., a line with nothing preceding the CRLF).
-  class Message
-    
-    include Patterns
-    include Utilities
-
-    # ==Making an email
-    # 
-    # You can make an new mail object via a block, passing a string, file or direct assignment.
-    # 
-    # ===Making an email via a block
-    # 
-    #  mail = Mail.new do
-    #       from 'mikel@test.lindsaar.net'
-    #         to 'you@test.lindsaar.net'
-    #    subject 'This is a test email'
-    #       body File.read('body.txt')
-    #  end
-    # 
-    #  mail.to_s #=> "From: mikel@test.lindsaar.net\r\nTo: you@...
-    #
-    # ===Making an email via passing a string
-    # 
-    #  mail = Mail.new("To: mikel@test.lindsaar.net\r\nSubject: Hello\r\n\r\nHi there!")
-    #  mail.body.to_s #=> 'Hi there!'
-    #  mail.subject   #=> 'Hello'
-    #  mail.to        #=> 'mikel@test.lindsaar.net'
-    # 
-    # ===Making an email from a file
-    # 
-    #  mail = Mail.read('path/to/file.eml')
-    #  mail.body.to_s #=> 'Hi there!'
-    #  mail.subject   #=> 'Hello'
-    #  mail.to        #=> 'mikel@test.lindsaar.net'
-    # 
-    # ===Making an email via assignment
-    # 
-    # You can assign values to a mail object via four approaches:
-    # 
-    # * Message#field_name=(value)
-    # * Message#field_name(value)
-    # * Message#['field_name']=(value)
-    # * Message#[:field_name]=(value)
-    # 
-    # Examples:
-    # 
-    #  mail = Mail.new
-    #  mail['from'] = 'mikel@test.lindsaar.net'
-    #  mail[:to]    = 'you@test.lindsaar.net'
-    #  mail.subject 'This is a test email'
-    #  mail.body    = 'This is a body'
-    # 
-    #  mail.to_s #=> "From: mikel@test.lindsaar.net\r\nTo: you@...
-    # 
-    def initialize(*args, &block)
-      @body = nil
-      @text_part = nil
-      @html_part = nil
-      @errors = nil
-      @header = nil
-      @charset = 'UTF-8'
-      @defaulted_charset = true
-      
-      @perform_deliveries = true
-      @raise_delivery_errors = true
-
-      @delivery_handler = nil
-      
-      @delivery_method = Mail.delivery_method.dup
-     
-      @transport_encoding = Mail::Encodings.get_encoding('7bit')
-
-      if args.flatten.first.respond_to?(:each_pair)
-        init_with_hash(args.flatten.first)
-      else
-        init_with_string(args.flatten[0].to_s.strip)
-      end
- 
-      if block_given?
-        instance_eval(&block)
-      end
-
-      self
-    end
-
-    # If you assign a delivery handler, mail will call :deliver_mail on the
-    # object you assign to delivery_handler, it will pass itself as the 
-    # single argument.
-    # 
-    # If you define a delivery_handler, then you are responsible for the
-    # following actions in the delivery cycle:
-    # 
-    # * Appending the mail object to Mail.deliveries as you see fit.
-    # * Checking the mail.perform_deliveries flag to decide if you should
-    #   actually call :deliver! the mail object or not.
-    # * Checking the mail.raise_delivery_errors flag to decide if you
-    #   should raise delivery errors if they occur.
-    # * Actually calling :deliver! (with the bang) on the mail object to
-    #   get it to deliver itself.
-    # 
-    # A simplest implementation of a delivery_handler would be
-    # 
-    #   class MyObject
-    #
-    #     def initialize
-    #       @mail = Mail.new('To: mikel@test.lindsaar.net')
-    #       @mail.delivery_handler = self
-    #     end
-    # 
-    #     attr_accessor :mail
-    # 
-    #     def deliver_mail(mail)
-    #       yield
-    #     end
-    #   end
-    # 
-    # Then doing:
-    # 
-    #   obj = MyObject.new
-    #   obj.mail.deliver
-    # 
-    # Would cause Mail to call obj.deliver_mail passing itself as a parameter,
-    # which then can just yield and let Mail do it's own private do_delivery
-    # method.
-    attr_accessor :delivery_handler
-
-    # If set to false, mail will go through the motions of doing a delivery,
-    # but not actually call the delivery method or append the mail object to
-    # the Mail.deliveries collection.  Useful for testing.
-    #
-    #   Mail.deliveries.size #=> 0
-    #   mail.delivery_method :smtp
-    #   mail.perform_deliveries = false
-    #   mail.deliver                        # Mail::SMTP not called here
-    #   Mail.deliveries.size #=> 0
-    # 
-    # If you want to test and query the Mail.deliveries collection to see what
-    # mail you sent, you should set perform_deliveries to true and use
-    # the :test mail delivery_method:
-    # 
-    #   Mail.deliveries.size #=> 0
-    #   mail.delivery_method :test
-    #   mail.perform_deliveries = true
-    #   mail.deliver
-    #   Mail.deliveries.size #=> 1
-    # 
-    # This setting is ignored by mail (though still available as a flag) if you
-    # define a delivery_handler
-    attr_accessor :perform_deliveries
-
-    # If set to false, mail will silently catch and ignore any exceptions
-    # raised through attempting to deliver an email.
-    # 
-    # This setting is ignored by mail (though still available as a flag) if you
-    # define a delivery_handler
-    attr_accessor :raise_delivery_errors
-
-    def register_for_delivery_notification(observer)
-      STDERR.puts("Message#register_for_delivery_notification is deprecated, please call Mail.register_observer instead")
-      Mail.register_observer(observer)
-    end
-    
-    def inform_observers
-      Mail.inform_observers(self)
-    end
-    
-    def inform_interceptors
-      Mail.inform_interceptors(self)
-    end
-    
-    # Delivers an mail object.
-    # 
-    # Examples:
-    # 
-    #  mail = Mail.read('file.eml')
-    #  mail.deliver
-    def deliver
-      inform_interceptors
-      if delivery_handler
-        delivery_handler.deliver_mail(self) { do_delivery }
-      else
-        do_delivery
-      end
-      inform_observers
-      self
-    end
-
-    # This method bypasses checking perform_deliveries and raise_delivery_errors, 
-    # so use with caution.
-    # 
-    # It still however fires callbacks to the observers if they are defined.
-    # 
-    # Returns self
-    def deliver!
-      delivery_method.deliver!(self)
-      inform_observers
-      self
-    end
-    
-    def delivery_method(method = nil, settings = {})
-      unless method
-        @delivery_method
-      else
-        @delivery_method = Mail::Configuration.instance.lookup_delivery_method(method).new(settings)
-      end
-    end
-    
-    # Provides the operator needed for sort et al.
-    # 
-    # Compares this mail object with another mail object, this is done by date, so an
-    # email that is older than another will appear first.
-    # 
-    # Example:
-    # 
-    #  mail1 = Mail.new do
-    #    date(Time.now)
-    #  end
-    #  mail2 = Mail.new do
-    #    date(Time.now - 86400) # 1 day older
-    #  end
-    #  [mail2, mail1].sort #=> [mail2, mail1]
-    def <=>(other)
-      if other.nil?
-        1
-      else
-        self.date <=> other.date
-      end
-    end
-    
-    # Two emails are the same if they have the same fields and body contents. One
-    # gotcha here is that Mail will insert Message-IDs when calling encoded, so doing
-    # mail1.encoded == mail2.encoded is most probably not going to return what you think
-    # as the assigned Message-IDs by Mail (if not already defined as the same) will ensure
-    # that the two objects are unique, and this comparison will ALWAYS return false.
-    # 
-    # So the == operator has been defined like so:  Two messages are the same if they have
-    # the same content, ignoring the Message-ID field, unless BOTH emails have a defined and
-    # different Message-ID value, then they are false.
-    # 
-    # So, in practice the == operator works like this:
-    # 
-    #  m1 = Mail.new("Subject: Hello\r\n\r\nHello")
-    #  m2 = Mail.new("Subject: Hello\r\n\r\nHello")
-    #  m1 == m2 #=> true
-    # 
-    #  m1 = Mail.new("Subject: Hello\r\n\r\nHello")
-    #  m2 = Mail.new("Message-ID: <1234@test>\r\nSubject: Hello\r\n\r\nHello")
-    #  m1 == m2 #=> true
-    # 
-    #  m1 = Mail.new("Message-ID: <1234@test>\r\nSubject: Hello\r\n\r\nHello")
-    #  m2 = Mail.new("Subject: Hello\r\n\r\nHello")
-    #  m1 == m2 #=> true
-    # 
-    #  m1 = Mail.new("Message-ID: <1234@test>\r\nSubject: Hello\r\n\r\nHello")
-    #  m2 = Mail.new("Message-ID: <1234@test>\r\nSubject: Hello\r\n\r\nHello")
-    #  m1 == m2 #=> true
-    # 
-    #  m1 = Mail.new("Message-ID: <1234@test>\r\nSubject: Hello\r\n\r\nHello")
-    #  m2 = Mail.new("Message-ID: <DIFFERENT@test>\r\nSubject: Hello\r\n\r\nHello")
-    #  m1 == m2 #=> false
-    def ==(other)
-      return false unless other.respond_to?(:encoded)
-      
-      if self.message_id && other.message_id
-        result = (self.encoded == other.encoded)
-      else
-        self_message_id, other_message_id = self.message_id, other.message_id
-        self.message_id, other.message_id = '<temp@test>', '<temp@test>'
-        result = self.encoded == other.encoded
-        self.message_id = "<#{self_message_id}>" if self_message_id
-        other.message_id = "<#{other_message_id}>" if other_message_id
-        result
-      end
-    end
-    
-    # Provides access to the raw source of the message as it was when it
-    # was instantiated. This is set at initialization and so is untouched
-    # by the parsers or decoder / encoders
-    #
-    # Example:
-    # 
-    #  mail = Mail.new('This is an invalid email message')
-    #  mail.raw_source #=> "This is an invalid email message"
-    def raw_source
-      @raw_source
-    end
-    
-    # Sets the envelope from for the email
-    def set_envelope( val )
-      @raw_envelope = val
-      @envelope = Mail::Envelope.new( val )
-    end
-    
-    # The raw_envelope is the From mikel@test.lindsaar.net Mon May  2 16:07:05 2009
-    # type field that you can see at the top of any email that has come
-    # from a mailbox
-    def raw_envelope
-      @raw_envelope
-    end
-    
-    def envelope_from
-      @envelope ? @envelope.from : nil
-    end
-    
-    def envelope_date
-      @envelope ? @envelope.date : nil
-    end
-    
-    # Sets the header of the message object.
-    # 
-    # Example:
-    # 
-    #  mail.header = 'To: mikel@test.lindsaar.net\r\nFrom: Bob@bob.com'
-    #  mail.header #=> <#Mail::Header
-    def header=(value)
-      @header = Mail::Header.new(value, charset)
-    end
-
-    # Returns the header object of the message object. Or, if passed
-    # a parameter sets the value.
-    # 
-    # Example:
-    # 
-    #  mail = Mail::Message.new('To: mikel\r\nFrom: you')
-    #  mail.header #=> #<Mail::Header:0x13ce14 @raw_source="To: mikel\r\nFr...
-    # 
-    #  mail.header #=> nil
-    #  mail.header 'To: mikel\r\nFrom: you'
-    #  mail.header #=> #<Mail::Header:0x13ce14 @raw_source="To: mikel\r\nFr...
-    def header(value = nil)
-      value ? self.header = value : @header
-    end
-    
-    # Provides a way to set custom headers, by passing in a hash
-    def headers(hash = {})
-      hash.each_pair do |k,v|
-        header[k] = v
-      end
-    end
-    
-    # Returns a list of parser errors on the header, each field that had an error
-    # will be reparsed as an unstructured field to preserve the data inside, but
-    # will not be used for further processing.
-    # 
-    # It returns a nested array of [field_name, value, original_error_message]
-    # per error found.
-    # 
-    # Example:
-    # 
-    #  message = Mail.new("Content-Transfer-Encoding: weirdo\r\n")
-    #  message.errors.size #=> 1
-    #  message.errors.first[0] #=> "Content-Transfer-Encoding"
-    #  message.errors.first[1] #=> "weirdo"
-    #  message.errors.first[3] #=> <The original error message exception>
-    # 
-    # This is a good first defence on detecting spam by the way.  Some spammers send
-    # invalid emails to try and get email parsers to give up parsing them.
-    def errors
-      header.errors
-    end
-    
-    # Returns the Bcc value of the mail object as an array of strings of 
-    # address specs.
-    #
-    # Example:
-    # 
-    #  mail.bcc = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.bcc #=> ['mikel@test.lindsaar.net']
-    #  mail.bcc = 'Mikel <mikel@test.lindsaar.net>, ada@test.lindsaar.net'
-    #  mail.bcc #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    # 
-    # Also allows you to set the value by passing a value as a parameter
-    #
-    # Example:
-    # 
-    #  mail.bcc 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.bcc #=> ['mikel@test.lindsaar.net']
-    # 
-    # Additionally, you can append new addresses to the returned Array like
-    # object.
-    # 
-    # Example:
-    # 
-    #  mail.bcc 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.bcc << 'ada@test.lindsaar.net'
-    #  mail.bcc #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    def bcc( val = nil )
-      default :bcc, val
-    end
-    
-    # Sets the Bcc value of the mail object, pass in a string of the field
-    #
-    # Example:
-    # 
-    #  mail.bcc = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.bcc #=> ['mikel@test.lindsaar.net']
-    #  mail.bcc = 'Mikel <mikel@test.lindsaar.net>, ada@test.lindsaar.net'
-    #  mail.bcc #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    def bcc=( val )
-      header[:bcc] = val
-    end
-    
-    # Returns the Cc value of the mail object as an array of strings of 
-    # address specs.
-    #
-    # Example:
-    # 
-    #  mail.cc = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.cc #=> ['mikel@test.lindsaar.net']
-    #  mail.cc = 'Mikel <mikel@test.lindsaar.net>, ada@test.lindsaar.net'
-    #  mail.cc #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    # 
-    # Also allows you to set the value by passing a value as a parameter
-    #
-    # Example:
-    # 
-    #  mail.cc 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.cc #=> ['mikel@test.lindsaar.net']
-    # 
-    # Additionally, you can append new addresses to the returned Array like
-    # object.
-    # 
-    # Example:
-    # 
-    #  mail.cc 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.cc << 'ada@test.lindsaar.net'
-    #  mail.cc #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    def cc( val = nil )
-      default :cc, val
-    end
-    
-    # Sets the Cc value of the mail object, pass in a string of the field
-    #
-    # Example:
-    # 
-    #  mail.cc = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.cc #=> ['mikel@test.lindsaar.net']
-    #  mail.cc = 'Mikel <mikel@test.lindsaar.net>, ada@test.lindsaar.net'
-    #  mail.cc #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    def cc=( val )
-      header[:cc] = val
-    end
-    
-    def comments( val = nil )
-      default :comments, val
-    end
-    
-    def comments=( val )
-      header[:comments] = val
-    end
-    
-    def content_description( val = nil )
-      default :content_description, val
-    end
-    
-    def content_description=( val )
-      header[:content_description] = val
-    end
-    
-    def content_disposition( val = nil )
-      default :content_disposition, val
-    end
-    
-    def content_disposition=( val )
-      header[:content_disposition] = val
-    end
-    
-    def content_id( val = nil )
-      default :content_id, val
-    end
-    
-    def content_id=( val )
-      header[:content_id] = val
-    end
-    
-    def content_location( val = nil )
-      default :content_location, val
-    end
-    
-    def content_location=( val )
-      header[:content_location] = val
-    end
-    
-    def content_transfer_encoding( val = nil )
-      default :content_transfer_encoding, val
-    end
-    
-    def content_transfer_encoding=( val )
-      header[:content_transfer_encoding] = val
-    end
-    
-    def content_type( val = nil )
-      default :content_type, val
-    end
-    
-    def content_type=( val )
-      header[:content_type] = val
-    end
-    
-    def date( val = nil )
-      default :date, val
-    end
-    
-    def date=( val )
-      header[:date] = val
-    end
-   
-    def transport_encoding( val = nil)
-      if val
-        self.transport_encoding = val
-      else
-        @transport_encoding
-      end
-    end
-
-    def transport_encoding=( val )
-      @transport_encoding = Mail::Encodings.get_encoding(val)
-    end
- 
-    # Returns the From value of the mail object as an array of strings of 
-    # address specs.
-    #
-    # Example:
-    # 
-    #  mail.from = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.from #=> ['mikel@test.lindsaar.net']
-    #  mail.from = 'Mikel <mikel@test.lindsaar.net>, ada@test.lindsaar.net'
-    #  mail.from #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    # 
-    # Also allows you to set the value by passing a value as a parameter
-    #
-    # Example:
-    # 
-    #  mail.from 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.from #=> ['mikel@test.lindsaar.net']
-    # 
-    # Additionally, you can append new addresses to the returned Array like
-    # object.
-    # 
-    # Example:
-    # 
-    #  mail.from 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.from << 'ada@test.lindsaar.net'
-    #  mail.from #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    def from( val = nil )
-      default :from, val
-    end
-    
-    # Sets the From value of the mail object, pass in a string of the field
-    #
-    # Example:
-    # 
-    #  mail.from = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.from #=> ['mikel@test.lindsaar.net']
-    #  mail.from = 'Mikel <mikel@test.lindsaar.net>, ada@test.lindsaar.net'
-    #  mail.from #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    def from=( val )
-      header[:from] = val
-    end
-    
-    def in_reply_to( val = nil )
-      default :in_reply_to, val
-    end
-    
-    def in_reply_to=( val )
-      header[:in_reply_to] = val
-    end
-    
-    def keywords( val = nil )
-      default :keywords, val
-    end
-    
-    def keywords=( val )
-      header[:keywords] = val
-    end
-    
-    # Returns the Message-ID of the mail object.  Note, per RFC 2822 the Message ID
-    # consists of what is INSIDE the < > usually seen in the mail header, so this method
-    # will return only what is inside.
-    # 
-    # Example:
-    # 
-    #  mail.message_id = '<1234@message.id>'
-    #  mail.message_id #=> '1234@message.id'
-    # 
-    # Also allows you to set the Message-ID by passing a string as a parameter
-    # 
-    #  mail.message_id '<1234@message.id>'
-    #  mail.message_id #=> '1234@message.id'
-    def message_id( val = nil )
-      default :message_id, val
-    end
-    
-    # Sets the Message-ID. Note, per RFC 2822 the Message ID consists of what is INSIDE
-    # the < > usually seen in the mail header, so this method will return only what is inside.
-    # 
-    #  mail.message_id = '<1234@message.id>'
-    #  mail.message_id #=> '1234@message.id'
-    def message_id=( val )
-      header[:message_id] = val
-    end
-    
-    # Returns the MIME version of the email as a string
-    # 
-    # Example:
-    # 
-    #  mail.mime_version = '1.0'
-    #  mail.mime_version #=> '1.0'
-    # 
-    # Also allows you to set the MIME version by passing a string as a parameter.
-    # 
-    # Example:
-    # 
-    #  mail.mime_version '1.0'
-    #  mail.mime_version #=> '1.0'
-    def mime_version( val = nil )
-      default :mime_version, val
-    end
-    
-    # Sets the MIME version of the email by accepting a string
-    # 
-    # Example:
-    # 
-    #  mail.mime_version = '1.0'
-    #  mail.mime_version #=> '1.0'
-    def mime_version=( val )
-      header[:mime_version] = val
-    end
-    
-    def received( val = nil )
-      if val
-        header[:received] = val
-      else
-        header[:received]
-      end
-    end
-    
-    def received=( val )
-      header[:received] = val
-    end
-    
-    def references( val = nil )
-      default :references, val
-    end
-    
-    def references=( val )
-      header[:references] = val
-    end
-    
-    # Returns the Reply-To value of the mail object as an array of strings of 
-    # address specs.
-    #
-    # Example:
-    # 
-    #  mail.reply_to = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.reply_to #=> ['mikel@test.lindsaar.net']
-    #  mail.reply_to = 'Mikel <mikel@test.lindsaar.net>, ada@test.lindsaar.net'
-    #  mail.reply_to #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    # 
-    # Also allows you to set the value by passing a value as a parameter
-    #
-    # Example:
-    # 
-    #  mail.reply_to 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.reply_to #=> ['mikel@test.lindsaar.net']
-    # 
-    # Additionally, you can append new addresses to the returned Array like
-    # object.
-    # 
-    # Example:
-    # 
-    #  mail.reply_to 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.reply_to << 'ada@test.lindsaar.net'
-    #  mail.reply_to #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    def reply_to( val = nil )
-      default :reply_to, val
-    end
-    
-    # Sets the Reply-To value of the mail object, pass in a string of the field
-    #
-    # Example:
-    # 
-    #  mail.reply_to = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.reply_to #=> ['mikel@test.lindsaar.net']
-    #  mail.reply_to = 'Mikel <mikel@test.lindsaar.net>, ada@test.lindsaar.net'
-    #  mail.reply_to #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    def reply_to=( val )
-      header[:reply_to] = val
-    end
-    
-    # Returns the Resent-Bcc value of the mail object as an array of strings of 
-    # address specs.
-    # 
-    # Example:
-    # 
-    #  mail.resent_bcc = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.resent_bcc #=> ['mikel@test.lindsaar.net']
-    #  mail.resent_bcc = 'Mikel <mikel@test.lindsaar.net>, ada@test.lindsaar.net'
-    #  mail.resent_bcc #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    # 
-    # Also allows you to set the value by passing a value as a parameter
-    #
-    # Example:
-    # 
-    #  mail.resent_bcc 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.resent_bcc #=> ['mikel@test.lindsaar.net']
-    # 
-    # Additionally, you can append new addresses to the returned Array like
-    # object.
-    # 
-    # Example:
-    # 
-    #  mail.resent_bcc 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.resent_bcc << 'ada@test.lindsaar.net'
-    #  mail.resent_bcc #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    def resent_bcc( val = nil )
-      default :resent_bcc, val
-    end
-    
-    # Sets the Resent-Bcc value of the mail object, pass in a string of the field
-    #
-    # Example:
-    # 
-    #  mail.resent_bcc = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.resent_bcc #=> ['mikel@test.lindsaar.net']
-    #  mail.resent_bcc = 'Mikel <mikel@test.lindsaar.net>, ada@test.lindsaar.net'
-    #  mail.resent_bcc #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']    
-    def resent_bcc=( val )
-      header[:resent_bcc] = val
-    end
-    
-    # Returns the Resent-Cc value of the mail object as an array of strings of 
-    # address specs.
-    # 
-    # Example:
-    # 
-    #  mail.resent_cc = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.resent_cc #=> ['mikel@test.lindsaar.net']
-    #  mail.resent_cc = 'Mikel <mikel@test.lindsaar.net>, ada@test.lindsaar.net'
-    #  mail.resent_cc #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    # 
-    # Also allows you to set the value by passing a value as a parameter
-    #
-    # Example:
-    # 
-    #  mail.resent_cc 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.resent_cc #=> ['mikel@test.lindsaar.net']
-    # 
-    # Additionally, you can append new addresses to the returned Array like
-    # object.
-    # 
-    # Example:
-    # 
-    #  mail.resent_cc 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.resent_cc << 'ada@test.lindsaar.net'
-    #  mail.resent_cc #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    def resent_cc( val = nil )
-      default :resent_cc, val
-    end
-    
-    # Sets the Resent-Cc value of the mail object, pass in a string of the field
-    #
-    # Example:
-    # 
-    #  mail.resent_cc = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.resent_cc #=> ['mikel@test.lindsaar.net']
-    #  mail.resent_cc = 'Mikel <mikel@test.lindsaar.net>, ada@test.lindsaar.net'
-    #  mail.resent_cc #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    def resent_cc=( val )
-      header[:resent_cc] = val
-    end
-    
-    def resent_date( val = nil )
-      default :resent_date, val
-    end
-    
-    def resent_date=( val )
-      header[:resent_date] = val
-    end
-    
-    # Returns the Resent-From value of the mail object as an array of strings of 
-    # address specs.
-    #
-    # Example:
-    # 
-    #  mail.resent_from = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.resent_from #=> ['mikel@test.lindsaar.net']
-    #  mail.resent_from = 'Mikel <mikel@test.lindsaar.net>, ada@test.lindsaar.net'
-    #  mail.resent_from #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    # 
-    # Also allows you to set the value by passing a value as a parameter
-    #
-    # Example:
-    # 
-    #  mail.resent_from ['Mikel <mikel@test.lindsaar.net>']
-    #  mail.resent_from #=> 'mikel@test.lindsaar.net'
-    # 
-    # Additionally, you can append new addresses to the returned Array like
-    # object.
-    # 
-    # Example:
-    # 
-    #  mail.resent_from 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.resent_from << 'ada@test.lindsaar.net'
-    #  mail.resent_from #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    def resent_from( val = nil )
-      default :resent_from, val
-    end
-    
-    # Sets the Resent-From value of the mail object, pass in a string of the field
-    #
-    # Example:
-    # 
-    #  mail.resent_from = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.resent_from #=> ['mikel@test.lindsaar.net']
-    #  mail.resent_from = 'Mikel <mikel@test.lindsaar.net>, ada@test.lindsaar.net'
-    #  mail.resent_from #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    def resent_from=( val )
-      header[:resent_from] = val
-    end
-    
-    def resent_message_id( val = nil )
-      default :resent_message_id, val
-    end
-    
-    def resent_message_id=( val )
-      header[:resent_message_id] = val
-    end
-    
-    # Returns the Resent-Sender value of the mail object, as a single string of an address
-    # spec.  A sender per RFC 2822 must be a single address, so you can not append to
-    # this address.
-    #
-    # Example:
-    # 
-    #  mail.resent_sender = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.resent_sender #=> 'mikel@test.lindsaar.net'
-    # 
-    # Also allows you to set the value by passing a value as a parameter
-    #
-    # Example:
-    # 
-    #  mail.resent_sender 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.resent_sender #=> 'mikel@test.lindsaar.net'
-    def resent_sender( val = nil )
-      default :resent_sender, val
-    end
-
-    # Sets the Resent-Sender value of the mail object, pass in a string of the field
-    #
-    # Example:
-    # 
-    #  mail.sender = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.sender #=> 'mikel@test.lindsaar.net'
-    def resent_sender=( val )
-      header[:resent_sender] = val
-    end
-    
-    # Returns the Resent-To value of the mail object as an array of strings of 
-    # address specs.
-    #
-    # Example:
-    # 
-    #  mail.resent_to = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.resent_to #=> ['mikel@test.lindsaar.net']
-    #  mail.resent_to = 'Mikel <mikel@test.lindsaar.net>, ada@test.lindsaar.net'
-    #  mail.resent_to #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    # 
-    # Also allows you to set the value by passing a value as a parameter
-    #
-    # Example:
-    # 
-    #  mail.resent_to 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.resent_to #=> ['mikel@test.lindsaar.net']
-    # 
-    # Additionally, you can append new addresses to the returned Array like
-    # object.
-    # 
-    # Example:
-    # 
-    #  mail.resent_to 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.resent_to << 'ada@test.lindsaar.net'
-    #  mail.resent_to #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    def resent_to( val = nil )
-      default :resent_to, val
-    end
-    
-    # Sets the Resent-To value of the mail object, pass in a string of the field
-    #
-    # Example:
-    # 
-    #  mail.resent_to = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.resent_to #=> ['mikel@test.lindsaar.net']
-    #  mail.resent_to = 'Mikel <mikel@test.lindsaar.net>, ada@test.lindsaar.net'
-    #  mail.resent_to #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    def resent_to=( val )
-      header[:resent_to] = val
-    end
-    
-    # Returns the return path of the mail object, or sets it if you pass a string
-    def return_path( val = nil )
-      default :return_path, val
-    end
-    
-    # Sets the return path of the object
-    def return_path=( val )
-      header[:return_path] = val
-    end
-    
-    # Returns the Sender value of the mail object, as a single string of an address
-    # spec.  A sender per RFC 2822 must be a single address.
-    #
-    # Example:
-    # 
-    #  mail.sender = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.sender #=> 'mikel@test.lindsaar.net'
-    # 
-    # Also allows you to set the value by passing a value as a parameter
-    #
-    # Example:
-    # 
-    #  mail.sender 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.sender #=> 'mikel@test.lindsaar.net'
-    def sender( val = nil )
-      default :sender, val
-    end
-    
-    # Sets the Sender value of the mail object, pass in a string of the field
-    #
-    # Example:
-    # 
-    #  mail.sender = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.sender #=> 'mikel@test.lindsaar.net'
-    def sender=( val )
-      header[:sender] = val
-    end
-    
-    # Returns the decoded value of the subject field, as a single string.
-    #
-    # Example:
-    # 
-    #  mail.subject = "G'Day mate"
-    #  mail.subject #=> "G'Day mate"
-    #  mail.subject = '=?UTF-8?Q?This_is_=E3=81=82_string?='
-    #  mail.subject #=> "This is あ string"
-    # 
-    # Also allows you to set the value by passing a value as a parameter
-    #
-    # Example:
-    # 
-    #  mail.subject "G'Day mate"
-    #  mail.subject #=> "G'Day mate"
-    def subject( val = nil )
-      default :subject, val
-    end
-    
-    # Sets the Subject value of the mail object, pass in a string of the field
-    #
-    # Example:
-    # 
-    #  mail.subject = '=?UTF-8?Q?This_is_=E3=81=82_string?='
-    #  mail.subject #=> "This is あ string"
-    def subject=( val )
-      header[:subject] = val
-    end
-    
-    # Returns the To value of the mail object as an array of strings of 
-    # address specs.
-    #
-    # Example:
-    # 
-    #  mail.to = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.to #=> ['mikel@test.lindsaar.net']
-    #  mail.to = 'Mikel <mikel@test.lindsaar.net>, ada@test.lindsaar.net'
-    #  mail.to #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    # 
-    # Also allows you to set the value by passing a value as a parameter
-    #
-    # Example:
-    # 
-    #  mail.to 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.to #=> ['mikel@test.lindsaar.net']
-    # 
-    # Additionally, you can append new addresses to the returned Array like
-    # object.
-    # 
-    # Example:
-    # 
-    #  mail.to 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.to << 'ada@test.lindsaar.net'
-    #  mail.to #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    def to( val = nil )
-      default :to, val
-    end
-    
-    # Sets the To value of the mail object, pass in a string of the field
-    #
-    # Example:
-    # 
-    #  mail.to = 'Mikel <mikel@test.lindsaar.net>'
-    #  mail.to #=> ['mikel@test.lindsaar.net']
-    #  mail.to = 'Mikel <mikel@test.lindsaar.net>, ada@test.lindsaar.net'
-    #  mail.to #=> ['mikel@test.lindsaar.net', 'ada@test.lindsaar.net']
-    def to=( val )
-      header[:to] = val
-    end
-
-    # Returns the default value of the field requested as a symbol.
-    #
-    # Each header field has a :default method which returns the most common use case for 
-    # that field, for example, the date field types will return a DateTime object when
-    # sent :default, the subject, or unstructured fields will return a decoded string of
-    # their value, the address field types will return a single addr_spec or an array of
-    # addr_specs if there is more than one.
-    def default( sym, val = nil )
-      if val
-        header[sym] = val
-      else
-        header[sym].default if header[sym]
-      end
-    end
-    
-    # Sets the body object of the message object.
-    # 
-    # Example:
-    # 
-    #  mail.body = 'This is the body'
-    #  mail.body #=> #<Mail::Body:0x13919c @raw_source="This is the bo...
-    # 
-    # You can also reset the body of an Message object by setting body to nil
-    # 
-    # Example:
-    # 
-    #  mail.body = 'this is the body'
-    #  mail.body.encoded #=> 'this is the body'
-    #  mail.body = nil
-    #  mail.body.encoded #=> ''
-    # 
-    # If you try and set the body of an email that is a multipart email, then instead
-    # of deleting all the parts of your email, mail will add a text/plain part to
-    # your email:
-    # 
-    #  mail.add_file 'somefilename.png'
-    #  mail.parts.length #=> 1
-    #  mail.body = "This is a body"
-    #  mail.parts.length #=> 2
-    #  mail.parts.last.content_type.content_type #=> 'This is a body'
-    def body=(value)
-      case
-      when value == nil
-        @body = Mail::Body.new('')
-      when @body && @body.multipart?
-        @body << Mail::Part.new(value)
-      else
-        @body = Mail::Body.new(value)
-      end
-      add_encoding_to_body
-    end
-
-    # Returns the body of the message object. Or, if passed
-    # a parameter sets the value.
-    # 
-    # Example:
-    # 
-    #  mail = Mail::Message.new('To: mikel\r\n\r\nThis is the body')
-    #  mail.body #=> #<Mail::Body:0x13919c @raw_source="This is the bo...
-    # 
-    #  mail.body 'This is another body'
-    #  mail.body #=> #<Mail::Body:0x13919c @raw_source="This is anothe...
-    def body(value = nil)
-      if value
-        self.body = value
-        add_encoding_to_body
-      else
-        @body
-      end
-    end
-    
-    def body_encoding(value)
-      if value.nil?
-        body.encoding
-      else
-        body.encoding = value
-      end
-    end
-
-    def body_encoding=(value)
-        body.encoding = value
-    end
- 
-    # Returns the list of addresses this message should be sent to by
-    # collecting the addresses off the to, cc and bcc fields.
-    # 
-    # Example:
-    # 
-    #  mail.to = 'mikel@test.lindsaar.net'
-    #  mail.cc = 'sam@test.lindsaar.net'
-    #  mail.bcc = 'bob@test.lindsaar.net'
-    #  mail.destinations.length #=> 3
-    #  mail.destinations.first #=> 'mikel@test.lindsaar.net'
-    def destinations
-      [to_addrs, cc_addrs, bcc_addrs].compact.flatten
-    end
-
-    # Returns an array of addresses (the encoded value) in the From field,
-    # if no From field, returns an empty array
-    def from_addrs
-      from ? [from].flatten : []
-    end
-    
-    # Returns an array of addresses (the encoded value) in the To field,
-    # if no To field, returns an empty array
-    def to_addrs
-      to ? [to].flatten : []
-    end
-    
-    # Returns an array of addresses (the encoded value) in the Cc field,
-    # if no Cc field, returns an empty array
-    def cc_addrs
-      cc ? [cc].flatten : []
-    end
-    
-    # Returns an array of addresses (the encoded value) in the Bcc field,
-    # if no Bcc field, returns an empty array
-    def bcc_addrs
-      bcc ? [bcc].flatten : []
-    end
-    
-    # Allows you to add an arbitrary header
-    # 
-    # Example:
-    #
-    #  mail['foo'] = '1234'
-    #  mail['foo'].to_s #=> '1234'
-    def []=(name, value)
-      if name.to_s == 'body'
-        self.body = value
-      elsif name.to_s =~ /content[-_]type/i
-        header[name] = value
-      elsif name.to_s == 'charset'
-        self.charset = value
-      else
-        header[name] = value
-      end
-    end
-
-    # Allows you to read an arbitrary header
-    # 
-    # Example:
-    #
-    #  mail['foo'] = '1234'
-    #  mail['foo'].to_s #=> '1234'
-    def [](name)
-      header[underscoreize(name)]
-    end
-    
-    # Method Missing in this implementation allows you to set any of the
-    # standard fields directly as you would the "to", "subject" etc.
-    # 
-    # Those fields used most often (to, subject et al) are given their
-    # own method for ease of documentation and also to avoid the hook 
-    # call to method missing.
-    # 
-    # This will only catch the known fields listed in:
-    #
-    #  Mail::Field::KNOWN_FIELDS
-    #
-    # as per RFC 2822, any ruby string or method name could pretty much
-    # be a field name, so we don't want to just catch ANYTHING sent to
-    # a message object and interpret it as a header.
-    # 
-    # This method provides all three types of header call to set, read
-    # and explicitly set with the = operator
-    # 
-    # Examples:
-    # 
-    #  mail.comments = 'These are some comments'
-    #  mail.comments #=> 'These are some comments'
-    # 
-    #  mail.comments 'These are other comments'
-    #  mail.comments #=> 'These are other comments'
-    # 
-    # 
-    #  mail.date = 'Tue, 1 Jul 2003 10:52:37 +0200'
-    #  mail.date.to_s #=> 'Tue, 1 Jul 2003 10:52:37 +0200'
-    # 
-    #  mail.date 'Tue, 1 Jul 2003 10:52:37 +0200'
-    #  mail.date.to_s #=> 'Tue, 1 Jul 2003 10:52:37 +0200'
-    # 
-    #
-    #  mail.resent_msg_id = '<1234@resent_msg_id.lindsaar.net>'
-    #  mail.resent_msg_id #=> '<1234@resent_msg_id.lindsaar.net>'
-    # 
-    #  mail.resent_msg_id '<4567@resent_msg_id.lindsaar.net>'
-    #  mail.resent_msg_id #=> '<4567@resent_msg_id.lindsaar.net>'
-    def method_missing(name, *args, &block)
-      #:nodoc:
-      # Only take the structured fields, as we could take _anything_ really
-      # as it could become an optional field... "but therin lies the dark side"
-      field_name = underscoreize(name).chomp("=")
-      if Mail::Field::KNOWN_FIELDS.include?(field_name)
-        if args.empty?
-          header[field_name]
-        else
-          header[field_name] = args.first
-        end
-      else
-        super # otherwise pass it on 
-      end 
-      #:startdoc:
-    end 
-
-    # Returns an FieldList of all the fields in the header in the order that
-    # they appear in the header
-    def header_fields
-      header.fields
-    end
-
-    # Returns true if the message has a message ID field, the field may or may
-    # not have a value, but the field exists or not.
-    def has_message_id?
-      header.has_message_id?
-    end
-
-    # Returns true if the message has a Date field, the field may or may
-    # not have a value, but the field exists or not.
-    def has_date?
-      header.has_date?
-    end
-
-    # Returns true if the message has a Date field, the field may or may
-    # not have a value, but the field exists or not.
-    def has_mime_version?
-      header.has_mime_version?
-    end
-    
-    def has_content_type?
-      !!header[:content_type]
-    end
-    
-    def has_charset?
-      !!(header[:content_type] && header[:content_type].parameters['charset'])
-    end
-    
-    def has_content_transfer_encoding?
-      header[:content_transfer_encoding] && header[:content_transfer_encoding].errors.blank?
-    end
-    
-    def has_transfer_encoding? # :nodoc:
-      STDERR.puts(":has_transfer_encoding? is deprecated in Mail 1.4.3.  Please use has_content_transfer_encoding?\n#{caller}")
-      has_content_transfer_encoding?
-    end
-
-    # Creates a new empty Message-ID field and inserts it in the correct order
-    # into the Header.  The MessageIdField object will automatically generate
-    # a unique message ID if you try and encode it or output it to_s without
-    # specifying a message id.
-    # 
-    # It will preserve the message ID you specify if you do.
-    def add_message_id(msg_id_val = '')
-      header['message-id'] = msg_id_val
-    end
-    
-    # Creates a new empty Date field and inserts it in the correct order
-    # into the Header.  The DateField object will automatically generate
-    # DateTime.now's date if you try and encode it or output it to_s without
-    # specifying a date yourself.
-    # 
-    # It will preserve any date you specify if you do.
-    def add_date(date_val = '')
-      header['date'] = date_val
-    end
-    
-    # Creates a new empty Mime Version field and inserts it in the correct order
-    # into the Header.  The MimeVersion object will automatically generate
-    # set itself to '1.0' if you try and encode it or output it to_s without
-    # specifying a version yourself.
-    # 
-    # It will preserve any date you specify if you do.
-    def add_mime_version(ver_val = '')
-      header['mime-version'] = ver_val
-    end
-    
-    # Adds a content type and charset if the body is US-ASCII
-    # 
-    # Otherwise raises a warning
-    def add_content_type
-      header[:content_type] = 'text/plain'
-    end
-
-    # Adds a content type and charset if the body is US-ASCII
-    # 
-    # Otherwise raises a warning
-    def add_charset
-      if !body.empty?
-        # Only give a warning if this isn't an attachment, has non US-ASCII and the user
-        # has not specified an encoding explicitly.
-        if @defaulted_charset && body.raw_source.not_ascii_only? && !self.attachment?
-          warning = "Non US-ASCII detected and no charset defined.\nDefaulting to UTF-8, set your own if this is incorrect.\n"
-          STDERR.puts(warning)
-        end
-        header[:content_type].parameters['charset'] = @charset
-      end
-    end
-    
-    # Adds a content transfer encoding
-    # 
-    # Otherwise raises a warning
-    def add_content_transfer_encoding
-      if body.only_us_ascii?
-        header[:content_transfer_encoding] = '7bit'
-      else
-        warning = "Non US-ASCII detected and no content-transfer-encoding defined.\nDefaulting to 8bit, set your own if this is incorrect.\n"
-        STDERR.puts(warning)
-        header[:content_transfer_encoding] = '8bit'
-      end
-    end
-    
-    def add_transfer_encoding # :nodoc:
-      STDERR.puts(":add_transfer_encoding is deprecated in Mail 1.4.3.  Please use add_content_transfer_encoding\n#{caller}")
-      add_content_transfer_encoding
-    end
-    
-    def transfer_encoding # :nodoc:
-      STDERR.puts(":transfer_encoding is deprecated in Mail 1.4.3.  Please use content_transfer_encoding\n#{caller}")
-      content_transfer_encoding
-    end
-    
-    # Returns the MIME media type of part we are on, this is taken from the content-type header
-    def mime_type
-      content_type ? header[:content_type].string : nil
-    end
-    
-    def message_content_type
-      STDERR.puts(":message_content_type is deprecated in Mail 1.4.3.  Please use mime_type\n#{caller}")
-      mime_type
-    end
-    
-    # Returns the character set defined in the content type field
-    def charset
-      if @header
-        content_type ? content_type_parameters['charset'] : @charset
-      else
-        @charset
-      end
-    end
-
-    # Sets the charset to the supplied value.
-    def charset=(value)
-      @defaulted_charset = false
-      @charset = value
-      @header.charset = value
-    end
-    
-    # Returns the main content type
-    def main_type
-      has_content_type? ? header[:content_type].main_type : nil
-    end
-    
-    # Returns the sub content type
-    def sub_type
-      has_content_type? ? header[:content_type].sub_type : nil
-    end
-    
-    # Returns the content type parameters
-    def mime_parameters
-      STDERR.puts(':mime_parameters is deprecated in Mail 1.4.3, please use :content_type_parameters instead')
-      content_type_parameters
-    end
-    
-    # Returns the content type parameters
-    def content_type_parameters
-      has_content_type? ? header[:content_type].parameters : nil
-    end
-    
-    # Returns true if the message is multipart
-    def multipart?
-      has_content_type? ? !!(main_type =~ /^multipart$/i) : false
-    end
-    
-    # Returns true if the message is a multipart/report
-    def multipart_report?
-      multipart? && sub_type =~ /^report$/i
-    end
-    
-    # Returns true if the message is a multipart/report; report-type=delivery-status;
-    def delivery_status_report?
-      multipart_report? && content_type_parameters['report-type'] =~ /^delivery-status$/i
-    end
-    
-    # returns the part in a multipart/report email that has the content-type delivery-status
-    def delivery_status_part
-      @delivery_stats_part ||= parts.select { |p| p.delivery_status_report_part? }.first
-    end
-    
-    def bounced?
-      delivery_status_part and delivery_status_part.bounced?
-    end
-    
-    def action
-      delivery_status_part and delivery_status_part.action
-    end
-    
-    def final_recipient
-      delivery_status_part and delivery_status_part.final_recipient
-    end
-    
-    def error_status
-      delivery_status_part and delivery_status_part.error_status
-    end
-
-    def diagnostic_code
-      delivery_status_part and delivery_status_part.diagnostic_code
-    end
-    
-    def remote_mta
-      delivery_status_part and delivery_status_part.remote_mta
-    end
-    
-    def retryable?
-      delivery_status_part and delivery_status_part.retryable?
-    end
-    
-    # Returns the current boundary for this message part
-    def boundary
-      content_type_parameters ? content_type_parameters['boundary'] : nil
-    end
-    
-    # Returns a parts list object of all the parts in the message
-    def parts
-      body.parts
-    end
-    
-    # Returns an AttachmentsList object, which holds all of the attachments in
-    # the receiver object (either the entier email or a part within) and all
-    # of it's descendants.
-    # 
-    # It also allows you to add attachments to the mail object directly, like so:
-    # 
-    #  mail.attachments['filename.jpg'] = File.read('/path/to/filename.jpg')
-    # 
-    # If you do this, then Mail will take the file name and work out the MIME media type
-    # set the Content-Type, Content-Disposition, Content-Transfer-Encoding and 
-    # base64 encode the contents of the attachment all for you.
-    # 
-    # You can also specify overrides if you want by passing a hash instead of a string:
-    # 
-    #  mail.attachments['filename.jpg'] = {:mime_type => 'application/x-gzip',
-    #                                      :content => File.read('/path/to/filename.jpg')}
-    # 
-    # If you want to use a different encoding than Base64, you can pass an encoding in,
-    # but then it is up to you to pass in the content pre-encoded, and don't expect
-    # Mail to know how to decode this data:
-    # 
-    #  file_content = SpecialEncode(File.read('/path/to/filename.jpg'))
-    #  mail.attachments['filename.jpg'] = {:mime_type => 'application/x-gzip',
-    #                                      :encoding => 'SpecialEncoding',
-    #                                      :content => file_content }
-    # 
-    # You can also search for specific attachments:
-    # 
-    #  # By Filename
-    #  mail.attachments['filename.jpg']   #=> Mail::Part object or nil
-    #  
-    #  # or by index
-    #  mail.attachments[0]                #=> Mail::Part (first attachment)
-    #  
-    def attachments
-      parts.attachments
-    end
-
-    def has_attachments?
-      !attachments.empty?
-    end
-    
-    # Accessor for html_part
-    def html_part(&block)
-      if block_given?
-        @html_part = Mail::Part.new(&block)
-        add_multipart_alternate_header unless html_part.blank?
-        add_part(@html_part)
-      else
-        @html_part || find_first_mime_type('text/html')
-      end
-    end
-    
-    # Accessor for text_part
-    def text_part(&block)
-      if block_given?
-        @text_part = Mail::Part.new(&block)
-        add_multipart_alternate_header unless html_part.blank?
-        add_part(@text_part)
-      else
-        @text_part || find_first_mime_type('text/plain')
-      end
-    end
-    
-    # Helper to add a html part to a multipart/alternative email.  If this and
-    # text_part are both defined in a message, then it will be a multipart/alternative
-    # message and set itself that way.
-    def html_part=(msg = nil)
-      if msg
-        @html_part = msg
-      else
-        @html_part = Mail::Part.new('Content-Type: text/html;')
-      end
-      add_multipart_alternate_header unless text_part.blank?
-      add_part(@html_part)
-    end
-    
-    # Helper to add a text part to a multipart/alternative email.  If this and
-    # html_part are both defined in a message, then it will be a multipart/alternative
-    # message and set itself that way.
-    def text_part=(msg = nil)
-      if msg
-        @text_part = msg
-      else
-        @text_part = Mail::Part.new('Content-Type: text/plain;')
-      end
-      add_multipart_alternate_header unless html_part.blank?
-      add_part(@text_part)
-    end
-
-    # Adds a part to the parts list or creates the part list
-    def add_part(part)
-      if !body.multipart? && !self.body.decoded.blank?
-         @text_part = Mail::Part.new('Content-Type: text/plain;')
-         @text_part.body = body.decoded
-         self.body << @text_part
-         add_multipart_alternate_header
-      end
-      add_boundary
-      self.body << part
-    end
-
-    # Allows you to add a part in block form to an existing mail message object
-    # 
-    # Example:
-    # 
-    #  mail = Mail.new do
-    #    part :content_type => "multipart/alternative", :content_disposition => "inline" do |p|
-    #      p.part :content_type => "text/plain", :body => "test text\nline #2"
-    #      p.part :content_type => "text/html", :body => "<b>test</b> HTML<br/>\nline #2"
-    #    end
-    #  end
-    def part(params = {})
-      new_part = Part.new(params)
-      yield new_part if block_given?
-      add_part(new_part)
-    end
-    
-    # Adds a file to the message.  You have two options with this method, you can
-    # just pass in the absolute path to the file you want and Mail will read the file,
-    # get the filename from the path you pass in and guess the MIME media type, or you
-    # can pass in the filename as a string, and pass in the file content as a blob.
-    # 
-    # Example:
-    # 
-    #  m = Mail.new
-    #  m.add_file('/path/to/filename.png')
-    # 
-    #  m = Mail.new
-    #  m.add_file(:filename => 'filename.png', :content => File.read('/path/to/file.jpg'))
-    #
-    # Note also that if you add a file to an existing message, Mail will convert that message
-    # to a MIME multipart email, moving whatever plain text body you had into it's own text
-    # plain part.
-    # 
-    # Example:
-    # 
-    #  m = Mail.new do
-    #    body 'this is some text'
-    #  end
-    #  m.multipart? #=> false
-    #  m.add_file('/path/to/filename.png')
-    #  m.multipart? #=> true
-    #  m.parts.first.content_type.content_type #=> 'text/plain'
-    #  m.parts.last.content_type.content_type #=> 'image/png'
-    # 
-    # See also #attachments
-    def add_file(values)
-      convert_to_multipart unless self.multipart? || self.body.decoded.blank?
-      add_multipart_mixed_header
-      if values.is_a?(String)
-        basename = File.basename(values)
-        filedata = File.read(values)
-      else
-        basename = values[:filename]
-        filedata = values[:content] || File.read(values[:filename])
-      end
-      self.attachments[basename] = filedata
-    end
-
-    def convert_to_multipart
-      text = @body.decoded
-      self.body = ''
-      text_part = Mail::Part.new({:content_type => 'text/plain;',
-                                  :body => text})
-      self.body << text_part
-    end
-
-    # Encodes the message, calls encode on all it's parts, gets an email message
-    # ready to send
-    def ready_to_send!
-      identify_and_set_transfer_encoding
-      parts.sort!([ "text/plain", "text/enriched", "text/html", "multipart/alternative" ])
-      parts.each do |part| 
-        part.transport_encoding = transport_encoding
-        part.ready_to_send!
-      end
-      add_required_fields
-    end
-
-    def encode!
-      STDERR.puts("Deprecated in 1.1.0 in favour of :ready_to_send! as it is less confusing with encoding and decoding.")
-      ready_to_send!
-    end
-    
-    # Outputs an encoded string representation of the mail message including
-    # all headers, attachments, etc.  This is an encoded email in US-ASCII,
-    # so it is able to be directly sent to an email server.
-    def encoded
-      ready_to_send!
-      buffer = header.encoded
-      buffer << "\r\n"
-      buffer << body.encoded(content_transfer_encoding)
-      buffer
-    end
-    
-    def to_s
-      encoded
-    end
-
-    def inspect
-      "#<#{self.class}:#{self.object_id}, Multipart: #{multipart?}, Headers: #{header.field_summary}>"
-    end
-
-    def decoded
-      case
-      when self.attachment?
-        decode_body
-      when !self.multipart?
-        body.decoded
-      else
-        raise NoMethodError, 'Can not decode an entire message, try calling #decoded on the various fields and body or parts if it is a multipart message.'
-      end
-    end
-
-    def read
-      if self.attachment?
-        decode_body
-      else
-        raise NoMethodError, 'Can not call read on a part unless it is an attachment.'
-      end
-    end
-
-    def decode_body
-      body.decoded
-    end
-    
-    # Returns true if this part is an attachment
-    def attachment?
-      find_attachment
-    end
-    
-    # Returns the attachment data if there is any
-    def attachment
-      @attachment
-    end
-    
-    # Returns the filename of the attachment
-    def filename
-      find_attachment
-    end
-
-    def all_parts
-      parts.map { |p| [p, p.all_parts] }.flatten
-    end
-
-    def find_first_mime_type(mt)
-      all_parts.detect { |p| p.mime_type == mt }
-    end
-    
-  private
-
-    #  2.1. General Description
-    #   A message consists of header fields (collectively called "the header
-    #   of the message") followed, optionally, by a body.  The header is a
-    #   sequence of lines of characters with special syntax as defined in
-    #   this standard. The body is simply a sequence of characters that
-    #   follows the header and is separated from the header by an empty line
-    #   (i.e., a line with nothing preceding the CRLF).
-    # 
-    # Additionally, I allow for the case where someone might have put whitespace
-    # on the "gap line"
-    def parse_message
-      header_part, body_part = raw_source.split(/#{CRLF}#{WSP}*#{CRLF}/m, 2)
-      self.header = header_part
-      self.body   = body_part
-    end
-    
-    def raw_source=(value)
-      @raw_source = value.to_crlf
-    end
-    
-    def set_envelope_header
-      if match_data = raw_source.to_s.match(/\AFrom\s(#{TEXT}+)#{CRLF}(.*)/m)
-        set_envelope(match_data[1])
-        self.raw_source = match_data[2]
-      end
-    end
-
-    def separate_parts
-      body.split!(boundary)
-    end
-    
-    def add_encoding_to_body
-      if has_content_transfer_encoding?
-        body.encoding = content_transfer_encoding
-      end
-    end
-
-    def identify_and_set_transfer_encoding
-        if body && body.multipart?
-            self.content_transfer_encoding = @transport_encoding
-        else
-            self.content_transfer_encoding = body.get_best_encoding(@transport_encoding)
-        end
-    end
-    
-    def add_required_fields
-      add_multipart_mixed_header    unless !body.multipart?
-      @body = Mail::Body.new('')    if body.nil?
-      add_message_id                unless (has_message_id? || self.class == Mail::Part)
-      add_date                      unless has_date?
-      add_mime_version              unless has_mime_version?
-      add_content_type              unless has_content_type?
-      add_charset                   unless has_charset?
-      add_content_transfer_encoding unless has_content_transfer_encoding?
-    end
-    
-    def add_multipart_alternate_header
-      header['content-type'] = ContentTypeField.with_boundary('multipart/alternative').value
-      header['content_type'].parameters[:charset] = @charset
-      body.boundary = boundary
-    end
-    
-    def add_boundary
-      unless body.boundary && boundary
-        header['content-type'] = 'multipart/mixed' unless header['content-type']
-        header['content-type'].parameters[:boundary] = ContentTypeField.generate_boundary
-        header['content_type'].parameters[:charset] = @charset
-        body.boundary = boundary
-      end
-    end
-    
-    def add_multipart_mixed_header
-      unless header['content-type']
-        header['content-type'] = ContentTypeField.with_boundary('multipart/mixed').value
-        header['content_type'].parameters[:charset] = @charset
-        body.boundary = boundary
-      end
-    end
-    
-    def init_with_hash(hash)
-      passed_in_options = hash.with_indifferent_access
-      self.raw_source = ''
-
-      @header = Mail::Header.new
-      @body = Mail::Body.new
-
-      # We need to store the body until last, as we need all headers added first
-      body_content = nil
-
-      passed_in_options.each_pair do |k,v|
-        k = underscoreize(k).to_sym if k.class == String
-        if k == :headers
-          self.headers(v)
-        elsif k == :body
-          body_content = v
-        else
-          self[k] = v
-        end
-      end
-
-      if body_content
-        self.body = body_content
-        if has_content_transfer_encoding?
-            body.encoding = content_transfer_encoding
-        end
-      end
-    end
-    
-    def init_with_string(string)
-      self.raw_source = string
-      set_envelope_header
-      parse_message
-      separate_parts if multipart?
-    end
-    
-    # Returns the filename of the attachment (if it exists) or returns nil
-    def find_attachment
-      case
-      when content_type && header[:content_type].filename
-        filename = header[:content_type].filename
-      when content_disposition && header[:content_disposition].filename
-        filename = header[:content_disposition].filename
-      when content_location && header[:content_location].location
-        filename = header[:content_location].location
-      else
-        filename = nil
-      end
-      filename
-    end
-
-    def do_delivery
-      begin
-        if perform_deliveries
-          delivery_method.deliver!(self)
-        end
-      rescue Exception => e # Net::SMTP errors or sendmail pipe errors
-        raise e if raise_delivery_errors
-      end
-    end
-    
-  end
-end