code_ownership 2.1.4 → 2.2.1

data/ext/cargo-vendor/hashbrown-0.12.3/src/raw/alloc.rs

@@ -1,73 +0,0 @@
-pub(crate) use self::inner::{do_alloc, Allocator, Global};
-
-#[cfg(feature = "nightly")]
-mod inner {
-    use crate::alloc::alloc::Layout;
-    pub use crate::alloc::alloc::{Allocator, Global};
-    use core::ptr::NonNull;
-
-    #[allow(clippy::map_err_ignore)]
-    pub fn do_alloc<A: Allocator>(alloc: &A, layout: Layout) -> Result<NonNull<u8>, ()> {
-        match alloc.allocate(layout) {
-            Ok(ptr) => Ok(ptr.as_non_null_ptr()),
-            Err(_) => Err(()),
-        }
-    }
-
-    #[cfg(feature = "bumpalo")]
-    unsafe impl Allocator for crate::BumpWrapper<'_> {
-        #[inline]
-        fn allocate(&self, layout: Layout) -> Result<NonNull<[u8]>, core::alloc::AllocError> {
-            match self.0.try_alloc_layout(layout) {
-                Ok(ptr) => Ok(NonNull::slice_from_raw_parts(ptr, layout.size())),
-                Err(_) => Err(core::alloc::AllocError),
-            }
-        }
-        #[inline]
-        unsafe fn deallocate(&self, _ptr: NonNull<u8>, _layout: Layout) {}
-    }
-}
-
-#[cfg(not(feature = "nightly"))]
-mod inner {
-    use crate::alloc::alloc::{alloc, dealloc, Layout};
-    use core::ptr::NonNull;
-
-    #[allow(clippy::missing_safety_doc)] // not exposed outside of this crate
-    pub unsafe trait Allocator {
-        fn allocate(&self, layout: Layout) -> Result<NonNull<u8>, ()>;
-        unsafe fn deallocate(&self, ptr: NonNull<u8>, layout: Layout);
-    }
-
-    #[derive(Copy, Clone)]
-    pub struct Global;
-    unsafe impl Allocator for Global {
-        #[inline]
-        fn allocate(&self, layout: Layout) -> Result<NonNull<u8>, ()> {
-            unsafe { NonNull::new(alloc(layout)).ok_or(()) }
-        }
-        #[inline]
-        unsafe fn deallocate(&self, ptr: NonNull<u8>, layout: Layout) {
-            dealloc(ptr.as_ptr(), layout);
-        }
-    }
-    impl Default for Global {
-        #[inline]
-        fn default() -> Self {
-            Global
-        }
-    }
-
-    pub fn do_alloc<A: Allocator>(alloc: &A, layout: Layout) -> Result<NonNull<u8>, ()> {
-        alloc.allocate(layout)
-    }
-
-    #[cfg(feature = "bumpalo")]
-    unsafe impl Allocator for crate::BumpWrapper<'_> {
-        #[allow(clippy::map_err_ignore)]
-        fn allocate(&self, layout: Layout) -> Result<NonNull<u8>, ()> {
-            self.0.try_alloc_layout(layout).map_err(|_| ())
-        }
-        unsafe fn deallocate(&self, _ptr: NonNull<u8>, _layout: Layout) {}
-    }
-}

data/ext/cargo-vendor/hashbrown-0.12.3/src/raw/bitmask.rs

@@ -1,122 +0,0 @@
-use super::imp::{BitMaskWord, BITMASK_MASK, BITMASK_STRIDE};
-#[cfg(feature = "nightly")]
-use core::intrinsics;
-
-/// A bit mask which contains the result of a `Match` operation on a `Group` and
-/// allows iterating through them.
-///
-/// The bit mask is arranged so that low-order bits represent lower memory
-/// addresses for group match results.
-///
-/// For implementation reasons, the bits in the set may be sparsely packed, so
-/// that there is only one bit-per-byte used (the high bit, 7). If this is the
-/// case, `BITMASK_STRIDE` will be 8 to indicate a divide-by-8 should be
-/// performed on counts/indices to normalize this difference. `BITMASK_MASK` is
-/// similarly a mask of all the actually-used bits.
-#[derive(Copy, Clone)]
-pub struct BitMask(pub BitMaskWord);
-
-#[allow(clippy::use_self)]
-impl BitMask {
-    /// Returns a new `BitMask` with all bits inverted.
-    #[inline]
-    #[must_use]
-    pub fn invert(self) -> Self {
-        BitMask(self.0 ^ BITMASK_MASK)
-    }
-
-    /// Flip the bit in the mask for the entry at the given index.
-    ///
-    /// Returns the bit's previous state.
-    #[inline]
-    #[allow(clippy::cast_ptr_alignment)]
-    #[cfg(feature = "raw")]
-    pub unsafe fn flip(&mut self, index: usize) -> bool {
-        // NOTE: The + BITMASK_STRIDE - 1 is to set the high bit.
-        let mask = 1 << (index * BITMASK_STRIDE + BITMASK_STRIDE - 1);
-        self.0 ^= mask;
-        // The bit was set if the bit is now 0.
-        self.0 & mask == 0
-    }
-
-    /// Returns a new `BitMask` with the lowest bit removed.
-    #[inline]
-    #[must_use]
-    pub fn remove_lowest_bit(self) -> Self {
-        BitMask(self.0 & (self.0 - 1))
-    }
-    /// Returns whether the `BitMask` has at least one set bit.
-    #[inline]
-    pub fn any_bit_set(self) -> bool {
-        self.0 != 0
-    }
-
-    /// Returns the first set bit in the `BitMask`, if there is one.
-    #[inline]
-    pub fn lowest_set_bit(self) -> Option<usize> {
-        if self.0 == 0 {
-            None
-        } else {
-            Some(unsafe { self.lowest_set_bit_nonzero() })
-        }
-    }
-
-    /// Returns the first set bit in the `BitMask`, if there is one. The
-    /// bitmask must not be empty.
-    #[inline]
-    #[cfg(feature = "nightly")]
-    pub unsafe fn lowest_set_bit_nonzero(self) -> usize {
-        intrinsics::cttz_nonzero(self.0) as usize / BITMASK_STRIDE
-    }
-    #[inline]
-    #[cfg(not(feature = "nightly"))]
-    pub unsafe fn lowest_set_bit_nonzero(self) -> usize {
-        self.trailing_zeros()
-    }
-
-    /// Returns the number of trailing zeroes in the `BitMask`.
-    #[inline]
-    pub fn trailing_zeros(self) -> usize {
-        // ARM doesn't have a trailing_zeroes instruction, and instead uses
-        // reverse_bits (RBIT) + leading_zeroes (CLZ). However older ARM
-        // versions (pre-ARMv7) don't have RBIT and need to emulate it
-        // instead. Since we only have 1 bit set in each byte on ARM, we can
-        // use swap_bytes (REV) + leading_zeroes instead.
-        if cfg!(target_arch = "arm") && BITMASK_STRIDE % 8 == 0 {
-            self.0.swap_bytes().leading_zeros() as usize / BITMASK_STRIDE
-        } else {
-            self.0.trailing_zeros() as usize / BITMASK_STRIDE
-        }
-    }
-
-    /// Returns the number of leading zeroes in the `BitMask`.
-    #[inline]
-    pub fn leading_zeros(self) -> usize {
-        self.0.leading_zeros() as usize / BITMASK_STRIDE
-    }
-}
-
-impl IntoIterator for BitMask {
-    type Item = usize;
-    type IntoIter = BitMaskIter;
-
-    #[inline]
-    fn into_iter(self) -> BitMaskIter {
-        BitMaskIter(self)
-    }
-}
-
-/// Iterator over the contents of a `BitMask`, returning the indices of set
-/// bits.
-pub struct BitMaskIter(BitMask);
-
-impl Iterator for BitMaskIter {
-    type Item = usize;
-
-    #[inline]
-    fn next(&mut self) -> Option<usize> {
-        let bit = self.0.lowest_set_bit()?;
-        self.0 = self.0.remove_lowest_bit();
-        Some(bit)
-    }
-}

data/ext/cargo-vendor/hashbrown-0.12.3/src/raw/generic.rs

@@ -1,154 +0,0 @@
-use super::bitmask::BitMask;
-use super::EMPTY;
-use core::{mem, ptr};
-
-// Use the native word size as the group size. Using a 64-bit group size on
-// a 32-bit architecture will just end up being more expensive because
-// shifts and multiplies will need to be emulated.
-#[cfg(any(
-    target_pointer_width = "64",
-    target_arch = "aarch64",
-    target_arch = "x86_64",
-    target_arch = "wasm32",
-))]
-type GroupWord = u64;
-#[cfg(all(
-    target_pointer_width = "32",
-    not(target_arch = "aarch64"),
-    not(target_arch = "x86_64"),
-    not(target_arch = "wasm32"),
-))]
-type GroupWord = u32;
-
-pub type BitMaskWord = GroupWord;
-pub const BITMASK_STRIDE: usize = 8;
-// We only care about the highest bit of each byte for the mask.
-#[allow(clippy::cast_possible_truncation, clippy::unnecessary_cast)]
-pub const BITMASK_MASK: BitMaskWord = 0x8080_8080_8080_8080_u64 as GroupWord;
-
-/// Helper function to replicate a byte across a `GroupWord`.
-#[inline]
-fn repeat(byte: u8) -> GroupWord {
-    GroupWord::from_ne_bytes([byte; Group::WIDTH])
-}
-
-/// Abstraction over a group of control bytes which can be scanned in
-/// parallel.
-///
-/// This implementation uses a word-sized integer.
-#[derive(Copy, Clone)]
-pub struct Group(GroupWord);
-
-// We perform all operations in the native endianness, and convert to
-// little-endian just before creating a BitMask. The can potentially
-// enable the compiler to eliminate unnecessary byte swaps if we are
-// only checking whether a BitMask is empty.
-#[allow(clippy::use_self)]
-impl Group {
-    /// Number of bytes in the group.
-    pub const WIDTH: usize = mem::size_of::<Self>();
-
-    /// Returns a full group of empty bytes, suitable for use as the initial
-    /// value for an empty hash table.
-    ///
-    /// This is guaranteed to be aligned to the group size.
-    #[inline]
-    pub const fn static_empty() -> &'static [u8; Group::WIDTH] {
-        #[repr(C)]
-        struct AlignedBytes {
-            _align: [Group; 0],
-            bytes: [u8; Group::WIDTH],
-        }
-        const ALIGNED_BYTES: AlignedBytes = AlignedBytes {
-            _align: [],
-            bytes: [EMPTY; Group::WIDTH],
-        };
-        &ALIGNED_BYTES.bytes
-    }
-
-    /// Loads a group of bytes starting at the given address.
-    #[inline]
-    #[allow(clippy::cast_ptr_alignment)] // unaligned load
-    pub unsafe fn load(ptr: *const u8) -> Self {
-        Group(ptr::read_unaligned(ptr.cast()))
-    }
-
-    /// Loads a group of bytes starting at the given address, which must be
-    /// aligned to `mem::align_of::<Group>()`.
-    #[inline]
-    #[allow(clippy::cast_ptr_alignment)]
-    pub unsafe fn load_aligned(ptr: *const u8) -> Self {
-        // FIXME: use align_offset once it stabilizes
-        debug_assert_eq!(ptr as usize & (mem::align_of::<Self>() - 1), 0);
-        Group(ptr::read(ptr.cast()))
-    }
-
-    /// Stores the group of bytes to the given address, which must be
-    /// aligned to `mem::align_of::<Group>()`.
-    #[inline]
-    #[allow(clippy::cast_ptr_alignment)]
-    pub unsafe fn store_aligned(self, ptr: *mut u8) {
-        // FIXME: use align_offset once it stabilizes
-        debug_assert_eq!(ptr as usize & (mem::align_of::<Self>() - 1), 0);
-        ptr::write(ptr.cast(), self.0);
-    }
-
-    /// Returns a `BitMask` indicating all bytes in the group which *may*
-    /// have the given value.
-    ///
-    /// This function may return a false positive in certain cases where
-    /// the byte in the group differs from the searched value only in its
-    /// lowest bit. This is fine because:
-    /// - This never happens for `EMPTY` and `DELETED`, only full entries.
-    /// - The check for key equality will catch these.
-    /// - This only happens if there is at least 1 true match.
-    /// - The chance of this happening is very low (< 1% chance per byte).
-    #[inline]
-    pub fn match_byte(self, byte: u8) -> BitMask {
-        // This algorithm is derived from
-        // https://graphics.stanford.edu/~seander/bithacks.html##ValueInWord
-        let cmp = self.0 ^ repeat(byte);
-        BitMask((cmp.wrapping_sub(repeat(0x01)) & !cmp & repeat(0x80)).to_le())
-    }
-
-    /// Returns a `BitMask` indicating all bytes in the group which are
-    /// `EMPTY`.
-    #[inline]
-    pub fn match_empty(self) -> BitMask {
-        // If the high bit is set, then the byte must be either:
-        // 1111_1111 (EMPTY) or 1000_0000 (DELETED).
-        // So we can just check if the top two bits are 1 by ANDing them.
-        BitMask((self.0 & (self.0 << 1) & repeat(0x80)).to_le())
-    }
-
-    /// Returns a `BitMask` indicating all bytes in the group which are
-    /// `EMPTY` or `DELETED`.
-    #[inline]
-    pub fn match_empty_or_deleted(self) -> BitMask {
-        // A byte is EMPTY or DELETED iff the high bit is set
-        BitMask((self.0 & repeat(0x80)).to_le())
-    }
-
-    /// Returns a `BitMask` indicating all bytes in the group which are full.
-    #[inline]
-    pub fn match_full(self) -> BitMask {
-        self.match_empty_or_deleted().invert()
-    }
-
-    /// Performs the following transformation on all bytes in the group:
-    /// - `EMPTY => EMPTY`
-    /// - `DELETED => EMPTY`
-    /// - `FULL => DELETED`
-    #[inline]
-    pub fn convert_special_to_empty_and_full_to_deleted(self) -> Self {
-        // Map high_bit = 1 (EMPTY or DELETED) to 1111_1111
-        // and high_bit = 0 (FULL) to 1000_0000
-        //
-        // Here's this logic expanded to concrete values:
-        //   let full = 1000_0000 (true) or 0000_0000 (false)
-        //   !1000_0000 + 1 = 0111_1111 + 1 = 1000_0000 (no carry)
-        //   !0000_0000 + 0 = 1111_1111 + 0 = 1111_1111 (no carry)
-        let full = !self.0 & repeat(0x80);
-        Group(!full + (full >> 7))
-    }
-}