citypay_api_client 1.0.3 → 1.1.1

data/spec/models/paylink_attachment_result_spec.rb

@@ -0,0 +1,45 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::PaylinkAttachmentResult
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::PaylinkAttachmentResult do
+  let(:instance) { CityPayApiClient::PaylinkAttachmentResult.new }
+
+  describe 'test an instance of PaylinkAttachmentResult' do
+    it 'should create an instance of PaylinkAttachmentResult' do
+      expect(instance).to be_instance_of(CityPayApiClient::PaylinkAttachmentResult)
+    end
+  end
+  describe 'test attribute "name"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "result"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "url"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/paylink_bill_payment_token_request_spec.rb

@@ -0,0 +1,63 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::PaylinkBillPaymentTokenRequest
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::PaylinkBillPaymentTokenRequest do
+  let(:instance) { CityPayApiClient::PaylinkBillPaymentTokenRequest.new }
+
+  describe 'test an instance of PaylinkBillPaymentTokenRequest' do
+    it 'should create an instance of PaylinkBillPaymentTokenRequest' do
+      expect(instance).to be_instance_of(CityPayApiClient::PaylinkBillPaymentTokenRequest)
+    end
+  end
+  describe 'test attribute "attachments"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "descriptor"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "due"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "email_notification_path"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "request"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "sms_notification_path"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/paylink_card_holder_spec.rb

@@ -0,0 +1,87 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::PaylinkCardHolder
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::PaylinkCardHolder do
+  let(:instance) { CityPayApiClient::PaylinkCardHolder.new }
+
+  describe 'test an instance of PaylinkCardHolder' do
+    it 'should create an instance of PaylinkCardHolder' do
+      expect(instance).to be_instance_of(CityPayApiClient::PaylinkCardHolder)
+    end
+  end
+  describe 'test attribute "accept_headers"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "address"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "company"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "email"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "firstname"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "lastname"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "mobile_no"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "remote_addr"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "title"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "user_agent"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/paylink_cart_item_model_spec.rb

@@ -0,0 +1,75 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::PaylinkCartItemModel
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::PaylinkCartItemModel do
+  let(:instance) { CityPayApiClient::PaylinkCartItemModel.new }
+
+  describe 'test an instance of PaylinkCartItemModel' do
+    it 'should create an instance of PaylinkCartItemModel' do
+      expect(instance).to be_instance_of(CityPayApiClient::PaylinkCartItemModel)
+    end
+  end
+  describe 'test attribute "amount"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "brand"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "category"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "count"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "label"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "max"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "sku"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "variant"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/paylink_cart_spec.rb

@@ -0,0 +1,69 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::PaylinkCart
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::PaylinkCart do
+  let(:instance) { CityPayApiClient::PaylinkCart.new }
+
+  describe 'test an instance of PaylinkCart' do
+    it 'should create an instance of PaylinkCart' do
+      expect(instance).to be_instance_of(CityPayApiClient::PaylinkCart)
+    end
+  end
+  describe 'test attribute "contents"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "coupon"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "mode"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "product_description"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "product_information"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "shipping"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "tax"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/paylink_config_spec.rb

@@ -0,0 +1,159 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::PaylinkConfig
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::PaylinkConfig do
+  let(:instance) { CityPayApiClient::PaylinkConfig.new }
+
+  describe 'test an instance of PaylinkConfig' do
+    it 'should create an instance of PaylinkConfig' do
+      expect(instance).to be_instance_of(CityPayApiClient::PaylinkConfig)
+    end
+  end
+  describe 'test attribute "acs_mode"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "custom_params"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "descriptor"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "expire_in"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "field_guard"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "lock_params"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "merch_logo"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "merch_terms"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "options"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "part_payments"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "pass_through_data"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "pass_through_headers"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "postback"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "postback_password"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "postback_policy"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "postback_username"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "redirect_delay"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "redirect_failure"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "redirect_success"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "renderer"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "return_params"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "ui"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/paylink_custom_param_spec.rb

@@ -0,0 +1,87 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::PaylinkCustomParam
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::PaylinkCustomParam do
+  let(:instance) { CityPayApiClient::PaylinkCustomParam.new }
+
+  describe 'test an instance of PaylinkCustomParam' do
+    it 'should create an instance of PaylinkCustomParam' do
+      expect(instance).to be_instance_of(CityPayApiClient::PaylinkCustomParam)
+    end
+  end
+  describe 'test attribute "field_type"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "group"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "label"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "locked"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "name"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "order"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "pattern"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "placeholder"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "required"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "value"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end

data/spec/models/paylink_email_notification_path_spec.rb

@@ -0,0 +1,57 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 5.4.0-SNAPSHOT
+
+=end
+
+require 'spec_helper'
+require 'json'
+require 'date'
+
+# Unit tests for CityPayApiClient::PaylinkEmailNotificationPath
+# Automatically generated by openapi-generator (https://openapi-generator.tech)
+# Please update as you see appropriate
+describe CityPayApiClient::PaylinkEmailNotificationPath do
+  let(:instance) { CityPayApiClient::PaylinkEmailNotificationPath.new }
+
+  describe 'test an instance of PaylinkEmailNotificationPath' do
+    it 'should create an instance of PaylinkEmailNotificationPath' do
+      expect(instance).to be_instance_of(CityPayApiClient::PaylinkEmailNotificationPath)
+    end
+  end
+  describe 'test attribute "bcc"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "cc"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "reply_to"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "template"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+  describe 'test attribute "to"' do
+    it 'should work' do
+      # assertion here. ref: https://www.relishapp.com/rspec/rspec-expectations/docs/built-in-matchers
+    end
+  end
+
+end