citypay_api_client 1.0.3 → 1.1.1

data/lib/citypay_api_client/models/list_merchants_response.rb

@@ -1,15 +1,16 @@
 =begin
 #CityPay Payment API
 
-# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security <aside class=\"notice\">   Before we begin a reminder that your application will need to adhere to PCI-DSS standards to operate safely   and to meet requirements set out by Visa and MasterCard and the PCI Security Standards Council including: </aside>  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
 
 Contact: support@citypay.com
 Generated by: https://openapi-generator.tech
-OpenAPI Generator version: 5.0.0-SNAPSHOT
+OpenAPI Generator version: 6.2.1
 
 =end
 
 require 'date'
+require 'time'
 
 module CityPayApiClient
   class ListMerchantsResponse
@@ -30,6 +31,11 @@ module CityPayApiClient
       }
     end
 
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
     # Attribute type mapping.
     def self.openapi_types
       {
@@ -146,8 +152,11 @@ module CityPayApiClient
     # @return [Object] Returns the model itself
     def build_from_hash(attributes)
       return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
       self.class.openapi_types.each_pair do |key, type|
-        if type =~ /\AArray<(.*)>/i
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
           # check to ensure the input is an array given that the attribute
           # is documented as an array but the input is not
           if attributes[self.class.attribute_map[key]].is_a?(Array)
@@ -155,7 +164,7 @@ module CityPayApiClient
           end
         elsif !attributes[self.class.attribute_map[key]].nil?
           self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
-        end # or else data not found in attributes(hash), not an issue as the data can be optional
+        end
       end
 
       self
@@ -167,8 +176,8 @@ module CityPayApiClient
     # @return [Object] Deserialized data
     def _deserialize(type, value)
       case type.to_sym
-      when :DateTime
-        DateTime.parse(value)
+      when :Time
+        Time.parse(value)
       when :Date
         Date.parse(value)
       when :String
@@ -198,7 +207,9 @@ module CityPayApiClient
           end
         end
       else # model
-        CityPayApiClient.const_get(type).build_from_hash(value)
+        # models (e.g. Pet) or oneOf
+        klass = CityPayApiClient.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
       end
     end
 
@@ -224,7 +235,7 @@ module CityPayApiClient
           is_nullable = self.class.openapi_nullable.include?(attr)
           next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
         end
-        
+
         hash[param] = _to_hash(value)
       end
       hash
@@ -247,5 +258,7 @@ module CityPayApiClient
         value
       end
     end
+
   end
+
 end

data/lib/citypay_api_client/models/mcc6012.rb

@@ -1,15 +1,16 @@
 =begin
 #CityPay Payment API
 
-# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security <aside class=\"notice\">   Before we begin a reminder that your application will need to adhere to PCI-DSS standards to operate safely   and to meet requirements set out by Visa and MasterCard and the PCI Security Standards Council including: </aside>  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
 
 Contact: support@citypay.com
 Generated by: https://openapi-generator.tech
-OpenAPI Generator version: 5.0.0-SNAPSHOT
+OpenAPI Generator version: 6.2.1
 
 =end
 
 require 'date'
+require 'time'
 
 module CityPayApiClient
   class MCC6012
@@ -35,6 +36,11 @@ module CityPayApiClient
       }
     end
 
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
     # Attribute type mapping.
     def self.openapi_types
       {
@@ -131,8 +137,11 @@ module CityPayApiClient
     # @return [Object] Returns the model itself
     def build_from_hash(attributes)
       return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
       self.class.openapi_types.each_pair do |key, type|
-        if type =~ /\AArray<(.*)>/i
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
           # check to ensure the input is an array given that the attribute
           # is documented as an array but the input is not
           if attributes[self.class.attribute_map[key]].is_a?(Array)
@@ -140,7 +149,7 @@ module CityPayApiClient
           end
         elsif !attributes[self.class.attribute_map[key]].nil?
           self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
-        end # or else data not found in attributes(hash), not an issue as the data can be optional
+        end
       end
 
       self
@@ -152,8 +161,8 @@ module CityPayApiClient
     # @return [Object] Deserialized data
     def _deserialize(type, value)
       case type.to_sym
-      when :DateTime
-        DateTime.parse(value)
+      when :Time
+        Time.parse(value)
       when :Date
         Date.parse(value)
       when :String
@@ -183,7 +192,9 @@ module CityPayApiClient
           end
         end
       else # model
-        CityPayApiClient.const_get(type).build_from_hash(value)
+        # models (e.g. Pet) or oneOf
+        klass = CityPayApiClient.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
       end
     end
 
@@ -209,7 +220,7 @@ module CityPayApiClient
           is_nullable = self.class.openapi_nullable.include?(attr)
           next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
         end
-        
+
         hash[param] = _to_hash(value)
       end
       hash
@@ -232,5 +243,7 @@ module CityPayApiClient
         value
       end
     end
+
   end
+
 end

data/lib/citypay_api_client/models/merchant.rb

@@ -1,15 +1,16 @@
 =begin
 #CityPay Payment API
 
-# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security <aside class=\"notice\">   Before we begin a reminder that your application will need to adhere to PCI-DSS standards to operate safely   and to meet requirements set out by Visa and MasterCard and the PCI Security Standards Council including: </aside>  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
 
 Contact: support@citypay.com
 Generated by: https://openapi-generator.tech
-OpenAPI Generator version: 5.0.0-SNAPSHOT
+OpenAPI Generator version: 6.2.1
 
 =end
 
 require 'date'
+require 'time'
 
 module CityPayApiClient
   class Merchant
@@ -39,6 +40,11 @@ module CityPayApiClient
       }
     end
 
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
     # Attribute type mapping.
     def self.openapi_types
       {
@@ -141,8 +147,11 @@ module CityPayApiClient
     # @return [Object] Returns the model itself
     def build_from_hash(attributes)
       return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
       self.class.openapi_types.each_pair do |key, type|
-        if type =~ /\AArray<(.*)>/i
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
           # check to ensure the input is an array given that the attribute
           # is documented as an array but the input is not
           if attributes[self.class.attribute_map[key]].is_a?(Array)
@@ -150,7 +159,7 @@ module CityPayApiClient
           end
         elsif !attributes[self.class.attribute_map[key]].nil?
           self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
-        end # or else data not found in attributes(hash), not an issue as the data can be optional
+        end
       end
 
       self
@@ -162,8 +171,8 @@ module CityPayApiClient
     # @return [Object] Deserialized data
     def _deserialize(type, value)
       case type.to_sym
-      when :DateTime
-        DateTime.parse(value)
+      when :Time
+        Time.parse(value)
       when :Date
         Date.parse(value)
       when :String
@@ -193,7 +202,9 @@ module CityPayApiClient
           end
         end
       else # model
-        CityPayApiClient.const_get(type).build_from_hash(value)
+        # models (e.g. Pet) or oneOf
+        klass = CityPayApiClient.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
       end
     end
 
@@ -219,7 +230,7 @@ module CityPayApiClient
           is_nullable = self.class.openapi_nullable.include?(attr)
           next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
         end
-        
+
         hash[param] = _to_hash(value)
       end
       hash
@@ -242,5 +253,7 @@ module CityPayApiClient
         value
       end
     end
+
   end
+
 end

data/lib/citypay_api_client/models/pa_res_auth_request.rb

@@ -1,19 +1,20 @@
 =begin
 #CityPay Payment API
 
-# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security <aside class=\"notice\">   Before we begin a reminder that your application will need to adhere to PCI-DSS standards to operate safely   and to meet requirements set out by Visa and MasterCard and the PCI Security Standards Council including: </aside>  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
 
 Contact: support@citypay.com
 Generated by: https://openapi-generator.tech
-OpenAPI Generator version: 5.0.0-SNAPSHOT
+OpenAPI Generator version: 6.2.1
 
 =end
 
 require 'date'
+require 'time'
 
 module CityPayApiClient
   class PaResAuthRequest
-    # The Merchant Data (MD) which is a unique ID to reference the authentication session. This value will be created by CityPay when required. When responding from the ACS, this value will be returned by the ACS. 
+    # The Merchant Data (MD) which is a unique ID to reference the authentication session.  This value will be created by CityPay when required. When responding from the ACS, this value will be returned by the ACS. 
     attr_accessor :md
 
     # The Payer Authentication Response packet which is returned by the ACS containing the  response of the authentication session including verification values. The response  is a base64 encoded packet and should be forwarded to CityPay untouched. 
@@ -27,6 +28,11 @@ module CityPayApiClient
       }
     end
 
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
     # Attribute type mapping.
     def self.openapi_types
       {
@@ -121,8 +127,11 @@ module CityPayApiClient
     # @return [Object] Returns the model itself
     def build_from_hash(attributes)
       return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
       self.class.openapi_types.each_pair do |key, type|
-        if type =~ /\AArray<(.*)>/i
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
           # check to ensure the input is an array given that the attribute
           # is documented as an array but the input is not
           if attributes[self.class.attribute_map[key]].is_a?(Array)
@@ -130,7 +139,7 @@ module CityPayApiClient
           end
         elsif !attributes[self.class.attribute_map[key]].nil?
           self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
-        end # or else data not found in attributes(hash), not an issue as the data can be optional
+        end
       end
 
       self
@@ -142,8 +151,8 @@ module CityPayApiClient
     # @return [Object] Deserialized data
     def _deserialize(type, value)
       case type.to_sym
-      when :DateTime
-        DateTime.parse(value)
+      when :Time
+        Time.parse(value)
       when :Date
         Date.parse(value)
       when :String
@@ -173,7 +182,9 @@ module CityPayApiClient
           end
         end
       else # model
-        CityPayApiClient.const_get(type).build_from_hash(value)
+        # models (e.g. Pet) or oneOf
+        klass = CityPayApiClient.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
       end
     end
 
@@ -199,7 +210,7 @@ module CityPayApiClient
           is_nullable = self.class.openapi_nullable.include?(attr)
           next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
         end
-        
+
         hash[param] = _to_hash(value)
       end
       hash
@@ -222,5 +233,7 @@ module CityPayApiClient
         value
       end
     end
+
   end
+
 end