citypay_api_client 1.0.3 → 1.1.1

data/lib/citypay_api_client/models/check_batch_status_response.rb

@@ -0,0 +1,220 @@
+=begin
+#CityPay Payment API
+
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+
+Contact: support@citypay.com
+Generated by: https://openapi-generator.tech
+OpenAPI Generator version: 6.2.1
+
+=end
+
+require 'date'
+require 'time'
+
+module CityPayApiClient
+  class CheckBatchStatusResponse
+    attr_accessor :batches
+
+    # Attribute mapping from ruby-style variable name to JSON key.
+    def self.attribute_map
+      {
+        :'batches' => :'batches'
+      }
+    end
+
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
+    # Attribute type mapping.
+    def self.openapi_types
+      {
+        :'batches' => :'Array<Batch>'
+      }
+    end
+
+    # List of attributes with nullable: true
+    def self.openapi_nullable
+      Set.new([
+      ])
+    end
+
+    # Initializes the object
+    # @param [Hash] attributes Model attributes in the form of hash
+    def initialize(attributes = {})
+      if (!attributes.is_a?(Hash))
+        fail ArgumentError, "The input argument (attributes) must be a hash in `CityPayApiClient::CheckBatchStatusResponse` initialize method"
+      end
+
+      # check to see if the attribute exists and convert string to symbol for hash key
+      attributes = attributes.each_with_object({}) { |(k, v), h|
+        if (!self.class.attribute_map.key?(k.to_sym))
+          fail ArgumentError, "`#{k}` is not a valid attribute in `CityPayApiClient::CheckBatchStatusResponse`. Please check the name to make sure it's valid. List of attributes: " + self.class.attribute_map.keys.inspect
+        end
+        h[k.to_sym] = v
+      }
+
+      if attributes.key?(:'batches')
+        if (value = attributes[:'batches']).is_a?(Array)
+          self.batches = value
+        end
+      end
+    end
+
+    # Show invalid properties with the reasons. Usually used together with valid?
+    # @return Array for valid properties with the reasons
+    def list_invalid_properties
+      invalid_properties = Array.new
+      invalid_properties
+    end
+
+    # Check to see if the all the properties in the model are valid
+    # @return true if the model is valid
+    def valid?
+      true
+    end
+
+    # Checks equality by comparing each attribute.
+    # @param [Object] Object to be compared
+    def ==(o)
+      return true if self.equal?(o)
+      self.class == o.class &&
+          batches == o.batches
+    end
+
+    # @see the `==` method
+    # @param [Object] Object to be compared
+    def eql?(o)
+      self == o
+    end
+
+    # Calculates hash code according to all attributes.
+    # @return [Integer] Hash code
+    def hash
+      [batches].hash
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def self.build_from_hash(attributes)
+      new.build_from_hash(attributes)
+    end
+
+    # Builds the object from hash
+    # @param [Hash] attributes Model attributes in the form of hash
+    # @return [Object] Returns the model itself
+    def build_from_hash(attributes)
+      return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
+      self.class.openapi_types.each_pair do |key, type|
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
+          # check to ensure the input is an array given that the attribute
+          # is documented as an array but the input is not
+          if attributes[self.class.attribute_map[key]].is_a?(Array)
+            self.send("#{key}=", attributes[self.class.attribute_map[key]].map { |v| _deserialize($1, v) })
+          end
+        elsif !attributes[self.class.attribute_map[key]].nil?
+          self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
+        end
+      end
+
+      self
+    end
+
+    # Deserializes the data based on type
+    # @param string type Data type
+    # @param string value Value to be deserialized
+    # @return [Object] Deserialized data
+    def _deserialize(type, value)
+      case type.to_sym
+      when :Time
+        Time.parse(value)
+      when :Date
+        Date.parse(value)
+      when :String
+        value.to_s
+      when :Integer
+        value.to_i
+      when :Float
+        value.to_f
+      when :Boolean
+        if value.to_s =~ /\A(true|t|yes|y|1)\z/i
+          true
+        else
+          false
+        end
+      when :Object
+        # generic object (usually a Hash), return directly
+        value
+      when /\AArray<(?<inner_type>.+)>\z/
+        inner_type = Regexp.last_match[:inner_type]
+        value.map { |v| _deserialize(inner_type, v) }
+      when /\AHash<(?<k_type>.+?), (?<v_type>.+)>\z/
+        k_type = Regexp.last_match[:k_type]
+        v_type = Regexp.last_match[:v_type]
+        {}.tap do |hash|
+          value.each do |k, v|
+            hash[_deserialize(k_type, k)] = _deserialize(v_type, v)
+          end
+        end
+      else # model
+        # models (e.g. Pet) or oneOf
+        klass = CityPayApiClient.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
+      end
+    end
+
+    # Returns the string representation of the object
+    # @return [String] String presentation of the object
+    def to_s
+      to_hash.to_s
+    end
+
+    # to_body is an alias to to_hash (backward compatibility)
+    # @return [Hash] Returns the object in the form of hash
+    def to_body
+      to_hash
+    end
+
+    # Returns the object in the form of hash
+    # @return [Hash] Returns the object in the form of hash
+    def to_hash
+      hash = {}
+      self.class.attribute_map.each_pair do |attr, param|
+        value = self.send(attr)
+        if value.nil?
+          is_nullable = self.class.openapi_nullable.include?(attr)
+          next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
+        end
+
+        hash[param] = _to_hash(value)
+      end
+      hash
+    end
+
+    # Outputs non-array value in the form of hash
+    # For object, use to_hash. Otherwise, just return the value
+    # @param [Object] value Any valid value
+    # @return [Hash] Returns the value in the form of hash
+    def _to_hash(value)
+      if value.is_a?(Array)
+        value.compact.map { |v| _to_hash(v) }
+      elsif value.is_a?(Hash)
+        {}.tap do |hash|
+          value.each { |k, v| hash[k] = _to_hash(v) }
+        end
+      elsif value.respond_to? :to_hash
+        value.to_hash
+      else
+        value
+      end
+    end
+
+  end
+
+end

data/lib/citypay_api_client/models/contact_details.rb

@@ -1,55 +1,56 @@
 =begin
 #CityPay Payment API
 
-# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security <aside class=\"notice\">   Before we begin a reminder that your application will need to adhere to PCI-DSS standards to operate safely   and to meet requirements set out by Visa and MasterCard and the PCI Security Standards Council including: </aside>  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
 
 Contact: support@citypay.com
 Generated by: https://openapi-generator.tech
-OpenAPI Generator version: 5.0.0-SNAPSHOT
+OpenAPI Generator version: 6.2.1
 
 =end
 
 require 'date'
+require 'time'
 
 module CityPayApiClient
   class ContactDetails
-    # The first line of the address for the card holder.
+    # The first line of the address for the shipping contact.
     attr_accessor :address1
 
-    # The second line of the address for the card holder.
+    # The second line of the address for the shipping contact.
     attr_accessor :address2
 
-    # The third line of the address for the card holder.
+    # The third line of the address for the shipping contact.
     attr_accessor :address3
 
-    # The area such as city, department, parish for the card holder.
+    # The area such as city, department, parish for the shipping contact.
     attr_accessor :area
 
-    # The company name for the card holder if the contact is a corporate contact.
+    # The company name for the shipping contact if the contact is a corporate contact.
     attr_accessor :company
 
     # The country code in ISO 3166 format. The country value may be used for fraud analysis and for   acceptance of the transaction. 
     attr_accessor :country
 
-    # An email address for the card holder which may be used for correspondence.
+    # An email address for the shipping contact which may be used for correspondence.
     attr_accessor :email
 
-    # The first name  of the card holder.
+    # The first name  of the shipping contact.
     attr_accessor :firstname
 
-    # The last name or surname of the card holder.
+    # The last name or surname of the shipping contact.
     attr_accessor :lastname
 
-    # A mobile number for the card holder the mobile number is often required by delivery companies to ensure they are able to be in contact when required.
+    # A mobile number for the shipping contact the mobile number is often required by delivery companies to ensure they are able to be in contact when required.
     attr_accessor :mobile_no
 
     # The postcode or zip code of the address which may be used for fraud analysis.
     attr_accessor :postcode
 
-    # A telephone number for the card holder.
+    # A telephone number for the shipping contact.
     attr_accessor :telephone_no
 
-    # A title for the card holder such as Mr, Mrs, Ms, M. Mme. etc.
+    # A title for the shipping contact such as Mr, Mrs, Ms, M. Mme. etc.
     attr_accessor :title
 
     # Attribute mapping from ruby-style variable name to JSON key.
@@ -71,6 +72,11 @@ module CityPayApiClient
       }
     end
 
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
     # Attribute type mapping.
     def self.openapi_types
       {
@@ -168,20 +174,24 @@ module CityPayApiClient
     # @return Array for valid properties with the reasons
     def list_invalid_properties
       invalid_properties = Array.new
-      if !@address1.nil? && @address1.to_s.length > 40
-        invalid_properties.push('invalid value for "address1", the character length must be smaller than or equal to 40.')
+      if !@address1.nil? && @address1.to_s.length > 50
+        invalid_properties.push('invalid value for "address1", the character length must be smaller than or equal to 50.')
       end
 
-      if !@address2.nil? && @address2.to_s.length > 30
-        invalid_properties.push('invalid value for "address2", the character length must be smaller than or equal to 30.')
+      if !@address2.nil? && @address2.to_s.length > 50
+        invalid_properties.push('invalid value for "address2", the character length must be smaller than or equal to 50.')
       end
 
-      if !@address3.nil? && @address3.to_s.length > 20
-        invalid_properties.push('invalid value for "address3", the character length must be smaller than or equal to 20.')
+      if !@address3.nil? && @address3.to_s.length > 50
+        invalid_properties.push('invalid value for "address3", the character length must be smaller than or equal to 50.')
       end
 
-      if !@area.nil? && @area.to_s.length > 20
-        invalid_properties.push('invalid value for "area", the character length must be smaller than or equal to 20.')
+      if !@area.nil? && @area.to_s.length > 50
+        invalid_properties.push('invalid value for "area", the character length must be smaller than or equal to 50.')
+      end
+
+      if !@company.nil? && @company.to_s.length > 50
+        invalid_properties.push('invalid value for "company", the character length must be smaller than or equal to 50.')
       end
 
       if !@country.nil? && @country.to_s.length > 2
@@ -192,12 +202,16 @@ module CityPayApiClient
         invalid_properties.push('invalid value for "country", the character length must be great than or equal to 2.')
       end
 
+      if !@email.nil? && @email.to_s.length > 254
+        invalid_properties.push('invalid value for "email", the character length must be smaller than or equal to 254.')
+      end
+
       if !@mobile_no.nil? && @mobile_no.to_s.length > 20
         invalid_properties.push('invalid value for "mobile_no", the character length must be smaller than or equal to 20.')
       end
 
-      if !@postcode.nil? && @postcode.to_s.length > 10
-        invalid_properties.push('invalid value for "postcode", the character length must be smaller than or equal to 10.')
+      if !@postcode.nil? && @postcode.to_s.length > 16
+        invalid_properties.push('invalid value for "postcode", the character length must be smaller than or equal to 16.')
       end
 
       if !@telephone_no.nil? && @telephone_no.to_s.length > 20
@@ -210,14 +224,16 @@ module CityPayApiClient
     # Check to see if the all the properties in the model are valid
     # @return true if the model is valid
     def valid?
-      return false if !@address1.nil? && @address1.to_s.length > 40
-      return false if !@address2.nil? && @address2.to_s.length > 30
-      return false if !@address3.nil? && @address3.to_s.length > 20
-      return false if !@area.nil? && @area.to_s.length > 20
+      return false if !@address1.nil? && @address1.to_s.length > 50
+      return false if !@address2.nil? && @address2.to_s.length > 50
+      return false if !@address3.nil? && @address3.to_s.length > 50
+      return false if !@area.nil? && @area.to_s.length > 50
+      return false if !@company.nil? && @company.to_s.length > 50
       return false if !@country.nil? && @country.to_s.length > 2
       return false if !@country.nil? && @country.to_s.length < 2
+      return false if !@email.nil? && @email.to_s.length > 254
       return false if !@mobile_no.nil? && @mobile_no.to_s.length > 20
-      return false if !@postcode.nil? && @postcode.to_s.length > 10
+      return false if !@postcode.nil? && @postcode.to_s.length > 16
       return false if !@telephone_no.nil? && @telephone_no.to_s.length > 20
       true
     end
@@ -225,8 +241,8 @@ module CityPayApiClient
     # Custom attribute writer method with validation
     # @param [Object] address1 Value to be assigned
     def address1=(address1)
-      if !address1.nil? && address1.to_s.length > 40
-        fail ArgumentError, 'invalid value for "address1", the character length must be smaller than or equal to 40.'
+      if !address1.nil? && address1.to_s.length > 50
+        fail ArgumentError, 'invalid value for "address1", the character length must be smaller than or equal to 50.'
       end
 
       @address1 = address1
@@ -235,8 +251,8 @@ module CityPayApiClient
     # Custom attribute writer method with validation
     # @param [Object] address2 Value to be assigned
     def address2=(address2)
-      if !address2.nil? && address2.to_s.length > 30
-        fail ArgumentError, 'invalid value for "address2", the character length must be smaller than or equal to 30.'
+      if !address2.nil? && address2.to_s.length > 50
+        fail ArgumentError, 'invalid value for "address2", the character length must be smaller than or equal to 50.'
       end
 
       @address2 = address2
@@ -245,8 +261,8 @@ module CityPayApiClient
     # Custom attribute writer method with validation
     # @param [Object] address3 Value to be assigned
     def address3=(address3)
-      if !address3.nil? && address3.to_s.length > 20
-        fail ArgumentError, 'invalid value for "address3", the character length must be smaller than or equal to 20.'
+      if !address3.nil? && address3.to_s.length > 50
+        fail ArgumentError, 'invalid value for "address3", the character length must be smaller than or equal to 50.'
       end
 
       @address3 = address3
@@ -255,13 +271,23 @@ module CityPayApiClient
     # Custom attribute writer method with validation
     # @param [Object] area Value to be assigned
     def area=(area)
-      if !area.nil? && area.to_s.length > 20
-        fail ArgumentError, 'invalid value for "area", the character length must be smaller than or equal to 20.'
+      if !area.nil? && area.to_s.length > 50
+        fail ArgumentError, 'invalid value for "area", the character length must be smaller than or equal to 50.'
       end
 
       @area = area
     end
 
+    # Custom attribute writer method with validation
+    # @param [Object] company Value to be assigned
+    def company=(company)
+      if !company.nil? && company.to_s.length > 50
+        fail ArgumentError, 'invalid value for "company", the character length must be smaller than or equal to 50.'
+      end
+
+      @company = company
+    end
+
     # Custom attribute writer method with validation
     # @param [Object] country Value to be assigned
     def country=(country)
@@ -276,6 +302,16 @@ module CityPayApiClient
       @country = country
     end
 
+    # Custom attribute writer method with validation
+    # @param [Object] email Value to be assigned
+    def email=(email)
+      if !email.nil? && email.to_s.length > 254
+        fail ArgumentError, 'invalid value for "email", the character length must be smaller than or equal to 254.'
+      end
+
+      @email = email
+    end
+
     # Custom attribute writer method with validation
     # @param [Object] mobile_no Value to be assigned
     def mobile_no=(mobile_no)
@@ -289,8 +325,8 @@ module CityPayApiClient
     # Custom attribute writer method with validation
     # @param [Object] postcode Value to be assigned
     def postcode=(postcode)
-      if !postcode.nil? && postcode.to_s.length > 10
-        fail ArgumentError, 'invalid value for "postcode", the character length must be smaller than or equal to 10.'
+      if !postcode.nil? && postcode.to_s.length > 16
+        fail ArgumentError, 'invalid value for "postcode", the character length must be smaller than or equal to 16.'
       end
 
       @postcode = postcode
@@ -350,8 +386,11 @@ module CityPayApiClient
     # @return [Object] Returns the model itself
     def build_from_hash(attributes)
       return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
       self.class.openapi_types.each_pair do |key, type|
-        if type =~ /\AArray<(.*)>/i
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
           # check to ensure the input is an array given that the attribute
           # is documented as an array but the input is not
           if attributes[self.class.attribute_map[key]].is_a?(Array)
@@ -359,7 +398,7 @@ module CityPayApiClient
           end
         elsif !attributes[self.class.attribute_map[key]].nil?
           self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
-        end # or else data not found in attributes(hash), not an issue as the data can be optional
+        end
       end
 
       self
@@ -371,8 +410,8 @@ module CityPayApiClient
     # @return [Object] Deserialized data
     def _deserialize(type, value)
       case type.to_sym
-      when :DateTime
-        DateTime.parse(value)
+      when :Time
+        Time.parse(value)
       when :Date
         Date.parse(value)
       when :String
@@ -402,7 +441,9 @@ module CityPayApiClient
           end
         end
       else # model
-        CityPayApiClient.const_get(type).build_from_hash(value)
+        # models (e.g. Pet) or oneOf
+        klass = CityPayApiClient.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
       end
     end
 
@@ -428,7 +469,7 @@ module CityPayApiClient
           is_nullable = self.class.openapi_nullable.include?(attr)
           next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
         end
-        
+
         hash[param] = _to_hash(value)
       end
       hash
@@ -451,5 +492,7 @@ module CityPayApiClient
         value
       end
     end
+
   end
+
 end

data/lib/citypay_api_client/models/decision.rb

@@ -1,15 +1,16 @@
 =begin
 #CityPay Payment API
 
-# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security <aside class=\"notice\">   Before we begin a reminder that your application will need to adhere to PCI-DSS standards to operate safely   and to meet requirements set out by Visa and MasterCard and the PCI Security Standards Council including: </aside>  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
+# This CityPay API is a HTTP RESTful payment API used for direct server to server transactional processing. It provides a number of payment mechanisms including: Internet, MOTO, Continuous Authority transaction processing, 3-D Secure decision handling using RFA Secure, Authorisation, Refunding, Pre-Authorisation, Cancellation/Voids and Completion processing. The API is also capable of tokinsed payments using Card Holder Accounts.  ## Compliance and Security Your application will need to adhere to PCI-DSS standards to operate safely and to meet requirements set out by  Visa and MasterCard and the PCI Security Standards Council. These include  * Data must be collected using TLS version 1.2 using [strong cryptography](#enabled-tls-ciphers). We will not accept calls to our API at   lower grade encryption levels. We regularly scan our TLS endpoints for vulnerabilities and perform TLS assessments   as part of our compliance program. * The application must not store sensitive card holder data (CHD) such as the card security code (CSC) or   primary access number (PAN) * The application must not display the full card number on receipts, it is recommended to mask the PAN   and show the last 4 digits. The API will return this for you for ease of receipt creation * If you are developing a website, you will be required to perform regular scans on the network where you host the   application to meet your compliance obligations * You will be required to be PCI Compliant and the application must adhere to the security standard. Further information   is available from [https://www.pcisecuritystandards.org/](https://www.pcisecuritystandards.org/) * The API verifies that the request is for a valid account and originates from a trusted source using the remote IP   address. Our application firewalls analyse data that may be an attempt to break a large number of security common   security vulnerabilities. 
 
 Contact: support@citypay.com
 Generated by: https://openapi-generator.tech
-OpenAPI Generator version: 5.0.0-SNAPSHOT
+OpenAPI Generator version: 6.2.1
 
 =end
 
 require 'date'
+require 'time'
 
 module CityPayApiClient
   class Decision
@@ -28,6 +29,11 @@ module CityPayApiClient
       }
     end
 
+    # Returns all the JSON keys this model knows about
+    def self.acceptable_attributes
+      attribute_map.values
+    end
+
     # Attribute type mapping.
     def self.openapi_types
       {
@@ -118,8 +124,11 @@ module CityPayApiClient
     # @return [Object] Returns the model itself
     def build_from_hash(attributes)
       return nil unless attributes.is_a?(Hash)
+      attributes = attributes.transform_keys(&:to_sym)
       self.class.openapi_types.each_pair do |key, type|
-        if type =~ /\AArray<(.*)>/i
+        if attributes[self.class.attribute_map[key]].nil? && self.class.openapi_nullable.include?(key)
+          self.send("#{key}=", nil)
+        elsif type =~ /\AArray<(.*)>/i
           # check to ensure the input is an array given that the attribute
           # is documented as an array but the input is not
           if attributes[self.class.attribute_map[key]].is_a?(Array)
@@ -127,7 +136,7 @@ module CityPayApiClient
           end
         elsif !attributes[self.class.attribute_map[key]].nil?
           self.send("#{key}=", _deserialize(type, attributes[self.class.attribute_map[key]]))
-        end # or else data not found in attributes(hash), not an issue as the data can be optional
+        end
       end
 
       self
@@ -139,8 +148,8 @@ module CityPayApiClient
     # @return [Object] Deserialized data
     def _deserialize(type, value)
       case type.to_sym
-      when :DateTime
-        DateTime.parse(value)
+      when :Time
+        Time.parse(value)
       when :Date
         Date.parse(value)
       when :String
@@ -170,7 +179,9 @@ module CityPayApiClient
           end
         end
       else # model
-        CityPayApiClient.const_get(type).build_from_hash(value)
+        # models (e.g. Pet) or oneOf
+        klass = CityPayApiClient.const_get(type)
+        klass.respond_to?(:openapi_one_of) ? klass.build(value) : klass.build_from_hash(value)
       end
     end
 
@@ -196,7 +207,7 @@ module CityPayApiClient
           is_nullable = self.class.openapi_nullable.include?(attr)
           next if !is_nullable || (is_nullable && !instance_variable_defined?(:"@#{attr}"))
         end
-        
+
         hash[param] = _to_hash(value)
       end
       hash
@@ -219,5 +230,7 @@ module CityPayApiClient
         value
       end
     end
+
   end
+
 end