chef 18.8.11 → 18.8.46

data/spec/functional/run_lock_spec.rb

@@ -1,481 +0,0 @@
-#
-# Author:: Daniel DeLeo (<dan@chef.io>)
-# Copyright:: Copyright (c) Chef Software Inc.
-# License:: Apache License, Version 2.0
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-require "spec_helper"
-require "chef/client"
-
-describe Chef::RunLock do
-
-  # This behavior works on windows, but the tests use fork :(
-  describe "when locking the chef-client run", unix_only: true do
-
-    ##
-    # Lockfile location and helpers
-
-    let(:random_temp_root) do
-      Kernel.srand(Time.now.to_i + Process.pid)
-      "#{Dir.tmpdir}/#{Kernel.rand(Time.now.to_i + Process.pid)}"
-    end
-
-    let(:lockfile) { "#{random_temp_root}/this/long/path/does/not/exist/chef-client-running.pid" }
-
-    # make sure to start with a clean slate.
-    before(:each) { log_event("rm -rf before"); FileUtils.rm_r(random_temp_root) if File.exist?(random_temp_root) }
-    after(:each) { log_event("rm -rf after"); FileUtils.rm_r(random_temp_root) if File.exist?(random_temp_root) }
-
-    def log_event(message, time = Time.now.strftime("%H:%M:%S.%L"))
-      events << [ message, time ]
-    end
-
-    def events
-      @events ||= []
-    end
-
-    WAIT_ON_LOCK_TIME = 1.0
-    def wait_on_lock(from_fork)
-      Timeout.timeout(WAIT_ON_LOCK_TIME) do
-        from_fork.readline
-      end
-    rescue Timeout::Error
-      raise "Lockfile never created, abandoning test"
-    end
-
-    CLIENT_PROCESS_TIMEOUT = 10
-    BREATHING_ROOM = 1
-
-    # ClientProcess is defined below
-    let!(:p1) { ClientProcess.new(self, "p1") }
-    let!(:p2) { ClientProcess.new(self, "p2") }
-    after(:each) do |example|
-
-      p1.stop
-      p2.stop
-    rescue
-      example.exception = $!
-      raise
-    ensure
-      if example.exception
-        print_events
-      end
-
-    end
-
-    def print_events
-      # Consume any remaining events that went on the channel and print them all
-      p1.last_event
-      p2.last_event
-      events.each_with_index.sort_by { |(message, time), index| [ time, index ] }.each do |(message, time), index|
-        print "#{time} #{message}\n"
-      end
-    end
-
-    context "when the lockfile does not already exist" do
-      context "when a client creates the lockfile but has not yet acquired the lock" do
-        before { p1.run_to("created lock") }
-        shared_context "second client gets the lock" do
-          it "the lockfile is created" do
-            log_event("lockfile exists? #{File.exist?(lockfile)}")
-            expect(File.exist?(lockfile)).to be_truthy
-          end
-
-          it "the lockfile is not locked" do
-            run_lock = Chef::RunLock.new(lockfile)
-            begin
-              expect(run_lock.test).to be_truthy
-            ensure
-              run_lock.release
-            end
-          end
-
-          it "the lockfile is empty" do
-            expect(IO.read(lockfile)).to eq("")
-          end
-
-          context "and a second client gets the lock" do
-            before { p2.run_to("acquired lock") }
-            it "the first client does not get the lock until the second finishes" do
-              p1.run_to("acquired lock") do
-                p2.run_to_completion
-              end
-            end
-            it "and the first client tries to get the lock and the second is killed, the first client gets the lock immediately" do
-              p1.run_to("acquired lock") do
-                sleep BREATHING_ROOM
-                expect(p1.last_event).to match(/after (started|created lock)/)
-                p2.stop
-              end
-              p1.run_to_completion
-            end
-          end
-        end
-
-        context "and the second client has done nothing" do
-          include_context "second client gets the lock"
-        end
-
-        context "and the second client has created the lockfile but not yet acquired the lock" do
-          before { p2.run_to("created lock") }
-          include_context "second client gets the lock"
-        end
-      end
-
-      context "when a client acquires the lock but has not yet saved the pid" do
-        before { p1.run_to("acquired lock") }
-
-        it "the lockfile is created" do
-          log_event("lockfile exists? #{File.exist?(lockfile)}")
-          expect(File.exist?(lockfile)).to be_truthy
-        end
-
-        it "the lockfile is locked" do
-          run_lock = Chef::RunLock.new(lockfile)
-          begin
-            expect(run_lock.test).to be_falsey
-          ensure
-            run_lock.release
-          end
-        end
-
-        it "sets FD_CLOEXEC on the lockfile", supports_cloexec: true do
-          run_lock = File.open(lockfile)
-          expect(run_lock.fcntl(Fcntl::F_GETFD, 0) & Fcntl::FD_CLOEXEC).to eq(Fcntl::FD_CLOEXEC)
-        end
-
-        it "the lockfile is empty" do
-          expect(IO.read(lockfile)).to eq("")
-        end
-
-        it "and a second client tries to acquire the lock, it doesn't get the lock until *after* the first client exits" do
-          # Start p2 and tell it to move forward in the background
-          p2.run_to("acquired lock") do
-            # While p2 is trying to acquire, wait a bit and then let p1 complete
-            sleep(BREATHING_ROOM)
-            expect(p2.last_event).to match(/after (started|created lock)/)
-            p1.run_to_completion
-          end
-
-          p2.run_to_completion
-        end
-
-        it "and a second client tries to get the lock and the first is killed, the second client gets the lock immediately" do
-          p2.run_to("acquired lock") do
-            sleep BREATHING_ROOM
-            expect(p2.last_event).to match(/after (started|created lock)/)
-            p1.stop
-          end
-          p2.run_to_completion
-        end
-      end
-
-      context "when a client acquires the lock and saves the pid" do
-        before { p1.run_to("saved pid") }
-
-        it "the lockfile is created" do
-          expect(File.exist?(lockfile)).to be_truthy
-        end
-
-        it "the lockfile is locked" do
-          run_lock = Chef::RunLock.new(lockfile)
-          begin
-            expect(run_lock.test).to be_falsey
-          ensure
-            run_lock.release
-          end
-        end
-
-        it "sets FD_CLOEXEC on the lockfile", supports_cloexec: true do
-          run_lock = File.open(lockfile)
-          expect(run_lock.fcntl(Fcntl::F_GETFD, 0) & Fcntl::FD_CLOEXEC).to eq(Fcntl::FD_CLOEXEC)
-        end
-
-        it "the PID is in the lockfile" do
-          expect(IO.read(lockfile)).to eq p1.pid.to_s
-        end
-
-        it "and a second client tries to acquire the lock, it doesn't get the lock until *after* the first client exits" do
-          # Start p2 and tell it to move forward in the background
-          p2.run_to("acquired lock") do
-            # While p2 is trying to acquire, wait a bit and then let p1 complete
-            sleep(BREATHING_ROOM)
-            expect(p2.last_event).to match(/after (started|created lock)/)
-            p1.run_to_completion
-          end
-
-          p2.run_to_completion
-        end
-
-        it "when a second client tries to get the lock and the first is killed, the second client gets the lock immediately" do
-          p2.run_to("acquired lock") do
-            sleep BREATHING_ROOM
-            expect(p2.last_event).to match(/after (started|created lock)/)
-            p1.stop
-          end
-          p2.run_to_completion
-        end
-      end
-
-      context "when a client acquires a lock and exits normally" do
-        before { p1.run_to_completion }
-
-        it "the lockfile remains" do
-          expect(File.exist?(lockfile)).to be_truthy
-        end
-
-        it "the lockfile is not locked" do
-          run_lock = Chef::RunLock.new(lockfile)
-          begin
-            expect(run_lock.test).to be_truthy
-          ensure
-            run_lock.release
-          end
-        end
-
-        it "the PID is in the lockfile" do
-          expect(IO.read(lockfile)).to eq p1.pid.to_s
-        end
-
-        it "and a second client tries to acquire the lock, it gets the lock immediately" do
-          p2.run_to_completion
-        end
-      end
-    end
-
-    it "test returns true and acquires the lock" do
-      run_lock = Chef::RunLock.new(lockfile)
-      from_tests, to_fork = IO.pipe
-      from_fork, to_tests = IO.pipe
-      p1 = fork do
-        expect(run_lock.test).to eq(true)
-        to_tests.puts "lock acquired"
-        # Wait for the test to tell us we can exit before exiting
-        from_tests.readline
-        exit! 0
-      end
-
-      wait_on_lock(from_fork)
-
-      p2 = fork do
-        expect(run_lock.test).to eq(false)
-        exit! 0
-      end
-
-      pid, exit_status = Process.waitpid2(p2)
-      expect(exit_status).to eq(0)
-      to_fork.puts "you can exit now"
-      pid, exit_status = Process.waitpid2(p1)
-      expect(exit_status).to eq(0)
-    end
-
-    it "test returns without waiting when the lock is acquired" do
-      run_lock = Chef::RunLock.new(lockfile)
-      from_tests, to_fork = IO.pipe
-      from_fork, to_tests = IO.pipe
-      p1 = fork do
-        run_lock.acquire
-        to_tests.puts "lock acquired"
-        # Wait for the test to tell us we can exit before exiting
-        from_tests.readline
-        exit! 0
-      end
-
-      wait_on_lock(from_fork)
-      expect(run_lock.test).to eq(false)
-
-      to_fork.puts "you can exit now"
-      pid, exit_status = Process.waitpid2(p1)
-      expect(exit_status).to eq(0)
-    end
-
-  end
-
-  #
-  # Runs a process in the background that will:
-  #
-  # 1. start up (`started` event)
-  # 2. acquire the runlock file (`acquired lock` event)
-  # 3. save the pid to the lockfile (`saved pid` event)
-  # 4. exit
-  #
-  # You control exactly how far the client process goes with the `run_to`
-  # method: it will stop at any given spot so you can test for race conditions.
-  #
-  # It uses a pair of pipes to communicate with the process. The tests will
-  # send an event name over to the process, which gives the process permission
-  # to run until it reaches that event (at which point it waits for another event
-  # name). The process sends the name of each event it reaches back to the tests.
-  #
-  class ClientProcess
-    def initialize(example, name)
-      @example = example
-      @name = name
-      @read_from_process, @write_to_tests = IO.pipe
-      @read_from_tests, @write_to_process = IO.pipe
-    end
-
-    attr_reader :example
-    attr_reader :name
-    attr_reader :pid
-
-    def last_event
-      loop do
-        line = readline_nonblock(read_from_process)
-        break if line.nil?
-
-        event, time = line.split("@")
-        example.log_event("#{name}.last_event got #{event}")
-        example.log_event("[#{name}] #{event}", time.strip)
-        @last_event = event
-      end
-      @last_event
-    end
-
-    def run_to(to_event, &background_block)
-      example.log_event("#{name}.run_to(#{to_event.inspect})")
-
-      # Start the process if it's not started
-      start unless pid
-
-      # Tell the process what to stop at (also means it can go)
-      write_to_process.print "#{to_event}\n"
-
-      # Run the background block
-      yield if background_block
-
-      # Wait until it gets there
-      Timeout.timeout(CLIENT_PROCESS_TIMEOUT) do
-        until @last_event == "after #{to_event}"
-          got_event, time = read_from_process.gets.split("@")
-          example.log_event("#{name}.last_event got #{got_event}")
-          example.log_event("[#{name}] #{got_event}", time.strip)
-          @last_event = got_event
-        end
-      end
-
-      example.log_event("#{name}.run_to(#{to_event.inspect}) finished")
-    end
-
-    def run_to_completion
-      example.log_event("#{name}.run_to_completion")
-      # Start the process if it's not started
-      start unless pid
-
-      # Tell the process to stop at nothing (no blocking)
-      @write_to_process.print "nothing\n"
-
-      # Wait for the process to exit
-      wait_for_exit
-      example.log_event("#{name}.run_to_completion finished")
-    end
-
-    def wait_for_exit
-      example.log_event("#{name}.wait_for_exit (pid #{pid})")
-      Timeout.timeout(CLIENT_PROCESS_TIMEOUT) do
-        Process.wait(pid) if pid
-      end
-      example.log_event("#{name}.wait_for_exit finished (pid #{pid})")
-    end
-
-    def stop
-      if pid
-        example.log_event("#{name}.stop (pid #{pid})")
-        begin
-          # Send it the kill signal over and over until it dies
-          Timeout.timeout(CLIENT_PROCESS_TIMEOUT) do
-            Process.kill(:KILL, pid)
-            sleep(0.05) until Process.waitpid2(pid, Process::WNOHANG)
-          end
-          example.log_event("#{name}.stop finished (stopped pid #{pid})")
-        # Process not found is perfectly fine when we're trying to kill a process :)
-        rescue Errno::ESRCH
-          example.log_event("#{name}.stop finished (pid #{pid} wasn't running)")
-        end
-      end
-
-      # close the IO.pipes so we don't leak them as open filehandles
-      @read_from_process.close rescue nil
-      @write_to_tests.close rescue nil
-      @read_from_tests.close rescue nil
-      @write_to_process.close rescue nil
-    end
-
-    def fire_event(event)
-      # Let the caller know what event we've reached
-      write_to_tests.print("after #{event}@#{Time.now.strftime("%H:%M:%S.%L")}\n")
-
-      # Block until the client tells us where to stop
-      if !@run_to_event || event == @run_to_event
-        write_to_tests.print("waiting for instructions after #{event}@#{Time.now.strftime("%H:%M:%S.%L")}\n")
-        @run_to_event = read_from_tests.gets.strip
-        write_to_tests.print("told to run to #{@run_to_event} after #{event}@#{Time.now.strftime("%H:%M:%S.%L")}\n")
-      elsif @run_to_event
-        write_to_tests.print("continuing until #{@run_to_event} after #{event}@#{Time.now.strftime("%H:%M:%S.%L")}\n")
-      end
-    end
-
-    private
-
-    attr_reader :read_from_process
-    attr_reader :write_to_tests
-    attr_reader :read_from_tests
-    attr_reader :write_to_process
-
-    class TestRunLock < Chef::RunLock
-      attr_accessor :client_process
-
-      def create_lock
-        super
-        client_process.fire_event("created lock")
-      end
-    end
-
-    def start
-      example.log_event("#{name}.start")
-      @pid = fork do
-
-        Timeout.timeout(CLIENT_PROCESS_TIMEOUT) do
-          run_lock = TestRunLock.new(example.lockfile)
-          run_lock.client_process = self
-          fire_event("started")
-          run_lock.acquire
-          fire_event("acquired lock")
-          run_lock.save_pid
-          fire_event("saved pid")
-          exit!(0)
-        end
-      rescue
-        fire_event($!.message.lines.join(" // "))
-        raise
-
-      end
-      example.log_event("#{name}.start forked (pid #{pid})")
-    end
-
-    def readline_nonblock(fd)
-      buffer = ""
-      buffer << fd.read_nonblock(1) while buffer[-1] != "\n"
-
-      buffer
-    # rescue IO::EAGAINUnreadable
-    rescue IO::WaitReadable
-      unless buffer == ""
-        sleep 0.1
-        retry
-      end
-      nil
-    end
-  end
-end

data/spec/functional/shell_spec.rb

@@ -1,149 +0,0 @@
-#
-# Author:: Daniel DeLeo (<dan@chef.io>)
-# Copyright:: Copyright (c) Chef Software Inc.
-# License:: Apache License, Version 2.0
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-require "spec_helper"
-require "chef/version"
-require "chef/shell"
-
-describe Shell do
-
-  # chef-shell's unit tests are by necessity very mock-heavy, and frequently do
-  # not catch cases where chef-shell fails to boot because of changes in
-  # chef/client.rb
-  describe "smoke tests", unix_only: true do
-
-    TIMEOUT = 300
-
-    def read_until(io, expected_value)
-      start = Time.new
-      buffer = ""
-      until buffer.include?(expected_value)
-        begin
-          buffer << io.read_nonblock(1)
-        rescue Errno::EWOULDBLOCK, Errno::EAGAIN, Errno::EIO, EOFError
-          sleep 0.01
-        end
-        if Time.new - start > TIMEOUT
-          raise "did not read expected value `#{expected_value}' within #{TIMEOUT}s\n" +
-            "Buffer so far: `#{buffer}'"
-        end
-      end
-      buffer
-    end
-
-    def flush_output(io)
-      start = Time.new
-      loop do
-        begin
-          io.read_nonblock(1)
-        rescue Errno::EWOULDBLOCK, Errno::EAGAIN
-          sleep 0.01
-        rescue EOFError, Errno::EIO
-          break
-        end
-        if Time.new - start > TIMEOUT
-          raise "timed out after #{TIMEOUT}s waiting for output to end"
-        end
-      end
-    end
-
-    def wait_or_die(pid)
-      start = Time.new
-
-      until exitstatus = Process.waitpid2(pid, Process::WNOHANG)
-        if Time.new - start > 5
-          STDERR.puts("chef-shell tty did not exit cleanly, killing it")
-          Process.kill(:KILL, pid)
-        end
-        sleep 0.01
-      end
-      exitstatus[1]
-    end
-
-    def run_chef_shell_with(options)
-      # Windows ruby installs don't (always?) have PTY,
-      # so hide the require here
-      require "pty"
-
-      # FIXME this is temporary... Solaris envs have TERM set to unknown
-      # and the value isn't propagating from the build environment TERM
-      # variable
-      ENV["TERM"] = "vt100" if ["", "unknown"].include?(ENV["TERM"].to_s)
-
-      config = File.expand_path("shef-config.rb", CHEF_SPEC_DATA)
-      reader, writer, pid = PTY.spawn("bundle exec #{ChefUtils::Dist::Infra::SHELL} --no-multiline --no-singleline --no-colorize -c #{config} #{options}")
-      read_until(reader, "chef (#{Chef::VERSION})>")
-      yield reader, writer if block_given?
-      writer.puts('"done"')
-      output = read_until(reader, '=> "done"')
-      writer.print("exit\n")
-      flush_output(reader)
-      writer.close
-
-      exitstatus = wait_or_die(pid)
-
-      [output, exitstatus]
-    rescue PTY::ChildExited => e
-      [output, e.status]
-    end
-
-    it "boots correctly with -lauto", :executables do
-      output, exitstatus = run_chef_shell_with("-lauto")
-      expect(output).to include("done")
-      expect(exitstatus).to eq(0)
-    end
-
-    it "sets the log_level from the command line", :executables do
-      output, exitstatus = run_chef_shell_with("-lfatal") do |out, keyboard|
-        show_log_level_code = %q[puts "===#{Chef::Log.level}==="]
-        keyboard.puts(show_log_level_code)
-        read_until(out, show_log_level_code)
-      end
-      expect(output).to include("===fatal===")
-      expect(exitstatus).to eq(0)
-    end
-
-    context "on solo mode" do
-      it "starts correctly", :executables do
-        output, exitstatus = run_chef_shell_with("--solo")
-        expect(output).to include("done")
-        expect(exitstatus).to eq(0)
-      end
-
-      it "should be able to use the API", :executables do
-        output, exitstatus = run_chef_shell_with("-s") do |out, keyboard|
-          simple_api_get = "api.get('data')"
-          keyboard.puts(simple_api_get)
-          read_until(out, simple_api_get)
-        end
-        expect(output).to include("{}")
-        expect(exitstatus).to eq(0)
-      end
-    end
-
-    it "sets the override_runlist from the command line", :executables do
-      output, exitstatus = run_chef_shell_with("-o 'override::foo,override::bar'") do |out, keyboard|
-        show_recipes_code = %q[puts "#{node["recipes"].inspect}"]
-        keyboard.puts(show_recipes_code)
-        read_until(out, show_recipes_code)
-      end
-      expect(output).to include(%q{["override::foo", "override::bar"]})
-      expect(exitstatus).to eq(0)
-    end
-  end
-end

data/spec/functional/tiny_server_spec.rb

@@ -1,79 +0,0 @@
-#
-# Author:: Daniel DeLeo (<dan@chef.io>)
-# Copyright:: Copyright (c) Chef Software Inc.
-# License:: Apache License, Version 2.0
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-require "spec_helper"
-require "tiny_server"
-
-describe TinyServer::API do
-  before do
-    @api = TinyServer::API.instance
-    @api.clear
-  end
-
-  it "is a Singleton" do
-    expect { TinyServer::API.new }.to raise_error NoMethodError
-  end
-
-  it "clears the router" do
-    @api.get("/blargh", 200, "blargh")
-    @api.clear
-    expect(@api.routes["GET"]).to be_empty
-  end
-
-  it "creates a route for a GET request" do
-    @api.get("/foo/bar", 200, "hello foobar")
-    # WEBrick gives you the full URI with host, Thin only gave the part after scheme+host+port
-    response = @api.call("REQUEST_METHOD" => "GET", "REQUEST_URI" => "http://localhost:1974/foo/bar")
-    expect(response).to eq([200, { "Content-Type" => "application/json" }, [ "hello foobar" ]])
-  end
-
-  it "creates a route for a request with a block" do
-    block_called = false
-    @api.get("/bar/baz", 200) { block_called = true; "hello barbaz" }
-    response = @api.call("REQUEST_METHOD" => "GET", "REQUEST_URI" => "http://localhost:1974/bar/baz")
-    expect(response).to eq([200, { "Content-Type" => "application/json" }, [ "hello barbaz" ]])
-    expect(block_called).to be_truthy
-  end
-
-  it "returns debugging info for 404s" do
-    response = @api.call("REQUEST_METHOD" => "GET", "REQUEST_URI" => "/no_such_thing")
-    expect(response[0]).to eq(404)
-    expect(response[1]).to eq({ "Content-Type" => "application/json" })
-    expect(response[2]).to be_a_kind_of(Array)
-    response_obj = Chef::JSONCompat.from_json(response[2].first)
-    expect(response_obj["message"]).to eq("no data matches the request for /no_such_thing")
-    expect(response_obj["available_routes"]).to eq({ "GET" => [], "PUT" => [], "POST" => [], "DELETE" => [] })
-    expect(response_obj["request"]).to eq({ "REQUEST_METHOD" => "GET", "REQUEST_URI" => "/no_such_thing" })
-  end
-
-end
-
-describe TinyServer::Manager do
-  it "runs the server" do
-    server = TinyServer::Manager.new
-    server.start
-    begin
-      TinyServer::API.instance.get("/index", 200, "[\"hello\"]")
-
-      rest = Chef::HTTP.new("http://localhost:9000")
-      expect(rest.get("index")).to eq("[\"hello\"]")
-    ensure
-      server.stop
-    end
-  end
-end