challah 1.0.0.beta2 → 1.0.0.beta3

data/vendor/bundle/gems/minitest-4.7.4/lib/minitest/unit.rb

@@ -0,0 +1,1415 @@
+require "optparse"
+require "rbconfig"
+
+##
+# Minimal (mostly drop-in) replacement for test-unit.
+#
+# :include: README.txt
+
+module MiniTest
+
+  def self.const_missing name # :nodoc:
+    case name
+    when :MINI_DIR then
+      msg = "MiniTest::MINI_DIR was removed. Don't violate other's internals."
+      warn "WAR\NING: #{msg}"
+      warn "WAR\NING: Used by #{caller.first}."
+      const_set :MINI_DIR, "bad value"
+    else
+      super
+    end
+  end
+
+  ##
+  # Assertion base class
+
+  class Assertion < Exception; end
+
+  ##
+  # Assertion raised when skipping a test
+
+  class Skip < Assertion; end
+
+  class << self
+    ##
+    # Filter object for backtraces.
+
+    attr_accessor :backtrace_filter
+  end
+
+  class BacktraceFilter # :nodoc:
+    def filter bt
+      return ["No backtrace"] unless bt
+
+      new_bt = []
+
+      unless $DEBUG then
+        bt.each do |line|
+          break if line =~ /lib\/minitest/
+          new_bt << line
+        end
+
+        new_bt = bt.reject { |line| line =~ /lib\/minitest/ } if new_bt.empty?
+        new_bt = bt.dup if new_bt.empty?
+      else
+        new_bt = bt.dup
+      end
+
+      new_bt
+    end
+  end
+
+  self.backtrace_filter = BacktraceFilter.new
+
+  def self.filter_backtrace bt # :nodoc:
+    backtrace_filter.filter bt
+  end
+
+  ##
+  # MiniTest Assertions.  All assertion methods accept a +msg+ which is
+  # printed if the assertion fails.
+
+  module Assertions
+    UNDEFINED = Object.new # :nodoc:
+
+    def UNDEFINED.inspect # :nodoc:
+      "UNDEFINED" # again with the rdoc bugs... :(
+    end
+
+    ##
+    # Returns the diff command to use in #diff. Tries to intelligently
+    # figure out what diff to use.
+
+    def self.diff
+      @diff = if (RbConfig::CONFIG['host_os'] =~ /mswin|mingw/ &&
+                  system("diff.exe", __FILE__, __FILE__)) then
+                "diff.exe -u"
+              elsif Minitest::Unit::Guard.maglev? then # HACK
+                "diff -u"
+              elsif system("gdiff", __FILE__, __FILE__)
+                "gdiff -u" # solaris and kin suck
+              elsif system("diff", __FILE__, __FILE__)
+                "diff -u"
+              else
+                nil
+              end unless defined? @diff
+
+      @diff
+    end
+
+    ##
+    # Set the diff command to use in #diff.
+
+    def self.diff= o
+      @diff = o
+    end
+
+    ##
+    # Returns a diff between +exp+ and +act+. If there is no known
+    # diff command or if it doesn't make sense to diff the output
+    # (single line, short output), then it simply returns a basic
+    # comparison between the two.
+
+    def diff exp, act
+      require "tempfile"
+
+      expect = mu_pp_for_diff exp
+      butwas = mu_pp_for_diff act
+      result = nil
+
+      need_to_diff =
+        MiniTest::Assertions.diff &&
+        (expect.include?("\n")    ||
+         butwas.include?("\n")    ||
+         expect.size > 30         ||
+         butwas.size > 30         ||
+         expect == butwas)
+
+      return "Expected: #{mu_pp exp}\n  Actual: #{mu_pp act}" unless
+        need_to_diff
+
+      Tempfile.open("expect") do |a|
+        a.puts expect
+        a.flush
+
+        Tempfile.open("butwas") do |b|
+          b.puts butwas
+          b.flush
+
+          result = `#{MiniTest::Assertions.diff} #{a.path} #{b.path}`
+          result.sub!(/^\-\-\- .+/, "--- expected")
+          result.sub!(/^\+\+\+ .+/, "+++ actual")
+
+          if result.empty? then
+            klass = exp.class
+            result = [
+                      "No visible difference in the #{klass}#inspect output.\n",
+                      "You should look at the implementation of #== on ",
+                      "#{klass} or its members.\n",
+                      expect,
+                     ].join
+          end
+        end
+      end
+
+      result
+    end
+
+    ##
+    # This returns a human-readable version of +obj+. By default
+    # #inspect is called. You can override this to use #pretty_print
+    # if you want.
+
+    def mu_pp obj
+      s = obj.inspect
+      s = s.encode Encoding.default_external if defined? Encoding
+      s
+    end
+
+    ##
+    # This returns a diff-able human-readable version of +obj+. This
+    # differs from the regular mu_pp because it expands escaped
+    # newlines and makes hex-values generic (like object_ids). This
+    # uses mu_pp to do the first pass and then cleans it up.
+
+    def mu_pp_for_diff obj
+      mu_pp(obj).gsub(/\\n/, "\n").gsub(/:0x[a-fA-F0-9]{4,}/m, ':0xXXXXXX')
+    end
+
+    def _assertions= n # :nodoc:
+      @_assertions = n
+    end
+
+    def _assertions # :nodoc:
+      @_assertions ||= 0
+    end
+
+    ##
+    # Fails unless +test+ is a true value.
+
+    def assert test, msg = nil
+      msg ||= "Failed assertion, no message given."
+      self._assertions += 1
+      unless test then
+        msg = msg.call if Proc === msg
+        raise MiniTest::Assertion, msg
+      end
+      true
+    end
+
+    ##
+    # Fails unless +obj+ is empty.
+
+    def assert_empty obj, msg = nil
+      msg = message(msg) { "Expected #{mu_pp(obj)} to be empty" }
+      assert_respond_to obj, :empty?
+      assert obj.empty?, msg
+    end
+
+    ##
+    # Fails unless <tt>exp == act</tt> printing the difference between
+    # the two, if possible.
+    #
+    # If there is no visible difference but the assertion fails, you
+    # should suspect that your #== is buggy, or your inspect output is
+    # missing crucial details.
+    #
+    # For floats use assert_in_delta.
+    #
+    # See also: MiniTest::Assertions.diff
+
+    def assert_equal exp, act, msg = nil
+      msg = message(msg, "") { diff exp, act }
+      assert exp == act, msg
+    end
+
+    ##
+    # For comparing Floats.  Fails unless +exp+ and +act+ are within +delta+
+    # of each other.
+    #
+    #   assert_in_delta Math::PI, (22.0 / 7.0), 0.01
+
+    def assert_in_delta exp, act, delta = 0.001, msg = nil
+      n = (exp - act).abs
+      msg = message(msg) {
+        "Expected |#{exp} - #{act}| (#{n}) to be <= #{delta}"
+      }
+      assert delta >= n, msg
+    end
+
+    ##
+    # For comparing Floats.  Fails unless +exp+ and +act+ have a relative
+    # error less than +epsilon+.
+
+    def assert_in_epsilon a, b, epsilon = 0.001, msg = nil
+      assert_in_delta a, b, [a.abs, b.abs].min * epsilon, msg
+    end
+
+    ##
+    # Fails unless +collection+ includes +obj+.
+
+    def assert_includes collection, obj, msg = nil
+      msg = message(msg) {
+        "Expected #{mu_pp(collection)} to include #{mu_pp(obj)}"
+      }
+      assert_respond_to collection, :include?
+      assert collection.include?(obj), msg
+    end
+
+    ##
+    # Fails unless +obj+ is an instance of +cls+.
+
+    def assert_instance_of cls, obj, msg = nil
+      msg = message(msg) {
+        "Expected #{mu_pp(obj)} to be an instance of #{cls}, not #{obj.class}"
+      }
+
+      assert obj.instance_of?(cls), msg
+    end
+
+    ##
+    # Fails unless +obj+ is a kind of +cls+.
+
+    def assert_kind_of cls, obj, msg = nil # TODO: merge with instance_of
+      msg = message(msg) {
+        "Expected #{mu_pp(obj)} to be a kind of #{cls}, not #{obj.class}" }
+
+      assert obj.kind_of?(cls), msg
+    end
+
+    ##
+    # Fails unless +matcher+ <tt>=~</tt> +obj+.
+
+    def assert_match matcher, obj, msg = nil
+      msg = message(msg) { "Expected #{mu_pp matcher} to match #{mu_pp obj}" }
+      assert_respond_to matcher, :"=~"
+      matcher = Regexp.new Regexp.escape matcher if String === matcher
+      assert matcher =~ obj, msg
+    end
+
+    ##
+    # Fails unless +obj+ is nil
+
+    def assert_nil obj, msg = nil
+      msg = message(msg) { "Expected #{mu_pp(obj)} to be nil" }
+      assert obj.nil?, msg
+    end
+
+    ##
+    # For testing with binary operators.
+    #
+    #   assert_operator 5, :<=, 4
+
+    def assert_operator o1, op, o2 = UNDEFINED, msg = nil
+      return assert_predicate o1, op, msg if UNDEFINED == o2
+      msg = message(msg) { "Expected #{mu_pp(o1)} to be #{op} #{mu_pp(o2)}" }
+      assert o1.__send__(op, o2), msg
+    end
+
+    ##
+    # Fails if stdout or stderr do not output the expected results.
+    # Pass in nil if you don't care about that streams output. Pass in
+    # "" if you require it to be silent. Pass in a regexp if you want
+    # to pattern match.
+    #
+    # NOTE: this uses #capture_io, not #capture_subprocess_io.
+    #
+    # See also: #assert_silent
+
+    def assert_output stdout = nil, stderr = nil
+      out, err = capture_io do
+        yield
+      end
+
+      err_msg = Regexp === stderr ? :assert_match : :assert_equal if stderr
+      out_msg = Regexp === stdout ? :assert_match : :assert_equal if stdout
+
+      y = send err_msg, stderr, err, "In stderr" if err_msg
+      x = send out_msg, stdout, out, "In stdout" if out_msg
+
+      (!stdout || x) && (!stderr || y)
+    end
+
+    ##
+    # For testing with predicates.
+    #
+    #   assert_predicate str, :empty?
+    #
+    # This is really meant for specs and is front-ended by assert_operator:
+    #
+    #   str.must_be :empty?
+
+    def assert_predicate o1, op, msg = nil
+      msg = message(msg) { "Expected #{mu_pp(o1)} to be #{op}" }
+      assert o1.__send__(op), msg
+    end
+
+    ##
+    # Fails unless the block raises one of +exp+. Returns the
+    # exception matched so you can check the message, attributes, etc.
+
+    def assert_raises *exp
+      msg = "#{exp.pop}.\n" if String === exp.last
+
+      begin
+        yield
+      rescue MiniTest::Skip => e
+        return e if exp.include? MiniTest::Skip
+        raise e
+      rescue Exception => e
+        expected = exp.any? { |ex|
+          if ex.instance_of? Module then
+            e.kind_of? ex
+          else
+            e.instance_of? ex
+          end
+        }
+
+        assert expected, proc {
+          exception_details(e, "#{msg}#{mu_pp(exp)} exception expected, not")
+        }
+
+        return e
+      end
+
+      exp = exp.first if exp.size == 1
+
+      flunk "#{msg}#{mu_pp(exp)} expected but nothing was raised."
+    end
+
+    ##
+    # Fails unless +obj+ responds to +meth+.
+
+    def assert_respond_to obj, meth, msg = nil
+      msg = message(msg) {
+        "Expected #{mu_pp(obj)} (#{obj.class}) to respond to ##{meth}"
+      }
+      assert obj.respond_to?(meth), msg
+    end
+
+    ##
+    # Fails unless +exp+ and +act+ are #equal?
+
+    def assert_same exp, act, msg = nil
+      msg = message(msg) {
+        data = [mu_pp(act), act.object_id, mu_pp(exp), exp.object_id]
+        "Expected %s (oid=%d) to be the same as %s (oid=%d)" % data
+      }
+      assert exp.equal?(act), msg
+    end
+
+    ##
+    # +send_ary+ is a receiver, message and arguments.
+    #
+    # Fails unless the call returns a true value
+    # TODO: I should prolly remove this from specs
+
+    def assert_send send_ary, m = nil
+      recv, msg, *args = send_ary
+      m = message(m) {
+        "Expected #{mu_pp(recv)}.#{msg}(*#{mu_pp(args)}) to return true" }
+      assert recv.__send__(msg, *args), m
+    end
+
+    ##
+    # Fails if the block outputs anything to stderr or stdout.
+    #
+    # See also: #assert_output
+
+    def assert_silent
+      assert_output "", "" do
+        yield
+      end
+    end
+
+    ##
+    # Fails unless the block throws +sym+
+
+    def assert_throws sym, msg = nil
+      default = "Expected #{mu_pp(sym)} to have been thrown"
+      caught = true
+      catch(sym) do
+        begin
+          yield
+        rescue ThreadError => e       # wtf?!? 1.8 + threads == suck
+          default += ", not \:#{e.message[/uncaught throw \`(\w+?)\'/, 1]}"
+        rescue ArgumentError => e     # 1.9 exception
+          default += ", not #{e.message.split(/ /).last}"
+        rescue NameError => e         # 1.8 exception
+          default += ", not #{e.name.inspect}"
+        end
+        caught = false
+      end
+
+      assert caught, message(msg) { default }
+    end
+
+    ##
+    # Captures $stdout and $stderr into strings:
+    #
+    #   out, err = capture_io do
+    #     puts "Some info"
+    #     warn "You did a bad thing"
+    #   end
+    #
+    #   assert_match %r%info%, out
+    #   assert_match %r%bad%, err
+    #
+    # NOTE: For efficiency, this method uses StringIO and does not
+    # capture IO for subprocesses. Use #capture_subprocess_io for
+    # that.
+
+    def capture_io
+      require 'stringio'
+
+      captured_stdout, captured_stderr = StringIO.new, StringIO.new
+
+      synchronize do
+        orig_stdout, orig_stderr = $stdout, $stderr
+        $stdout, $stderr         = captured_stdout, captured_stderr
+
+        begin
+          yield
+        ensure
+          $stdout = orig_stdout
+          $stderr = orig_stderr
+        end
+      end
+
+      return captured_stdout.string, captured_stderr.string
+    end
+
+    ##
+    # Captures $stdout and $stderr into strings, using Tempfile to
+    # ensure that subprocess IO is captured as well.
+    #
+    #   out, err = capture_subprocess_io do
+    #     system "echo Some info"
+    #     system "echo You did a bad thing 1>&2"
+    #   end
+    #
+    #   assert_match %r%info%, out
+    #   assert_match %r%bad%, err
+    #
+    # NOTE: This method is approximately 10x slower than #capture_io so
+    # only use it when you need to test the output of a subprocess.
+
+    def capture_subprocess_io
+      require 'tempfile'
+
+      captured_stdout, captured_stderr = Tempfile.new("out"), Tempfile.new("err")
+
+      synchronize do
+        orig_stdout, orig_stderr = $stdout.dup, $stderr.dup
+        $stdout.reopen captured_stdout
+        $stderr.reopen captured_stderr
+
+        begin
+          yield
+
+          $stdout.rewind
+          $stderr.rewind
+
+          [captured_stdout.read, captured_stderr.read]
+        ensure
+          captured_stdout.unlink
+          captured_stderr.unlink
+          $stdout.reopen orig_stdout
+          $stderr.reopen orig_stderr
+        end
+      end
+    end
+
+    ##
+    # Returns details for exception +e+
+
+    def exception_details e, msg
+      [
+       "#{msg}",
+       "Class: <#{e.class}>",
+       "Message: <#{e.message.inspect}>",
+       "---Backtrace---",
+       "#{MiniTest::filter_backtrace(e.backtrace).join("\n")}",
+       "---------------",
+      ].join "\n"
+    end
+
+    ##
+    # Fails with +msg+
+
+    def flunk msg = nil
+      msg ||= "Epic Fail!"
+      assert false, msg
+    end
+
+    ##
+    # Returns a proc that will output +msg+ along with the default message.
+
+    def message msg = nil, ending = ".", &default
+      proc {
+        msg = msg.call.chomp(".") if Proc === msg
+        custom_message = "#{msg}.\n" unless msg.nil? or msg.to_s.empty?
+        "#{custom_message}#{default.call}#{ending}"
+      }
+    end
+
+    ##
+    # used for counting assertions
+
+    def pass msg = nil
+      assert true
+    end
+
+    ##
+    # Fails if +test+ is a true value
+
+    def refute test, msg = nil
+      msg ||= "Failed refutation, no message given"
+      not assert(! test, msg)
+    end
+
+    ##
+    # Fails if +obj+ is empty.
+
+    def refute_empty obj, msg = nil
+      msg = message(msg) { "Expected #{mu_pp(obj)} to not be empty" }
+      assert_respond_to obj, :empty?
+      refute obj.empty?, msg
+    end
+
+    ##
+    # Fails if <tt>exp == act</tt>.
+    #
+    # For floats use refute_in_delta.
+
+    def refute_equal exp, act, msg = nil
+      msg = message(msg) {
+        "Expected #{mu_pp(act)} to not be equal to #{mu_pp(exp)}"
+      }
+      refute exp == act, msg
+    end
+
+    ##
+    # For comparing Floats.  Fails if +exp+ is within +delta+ of +act+.
+    #
+    #   refute_in_delta Math::PI, (22.0 / 7.0)
+
+    def refute_in_delta exp, act, delta = 0.001, msg = nil
+      n = (exp - act).abs
+      msg = message(msg) {
+        "Expected |#{exp} - #{act}| (#{n}) to not be <= #{delta}"
+      }
+      refute delta >= n, msg
+    end
+
+    ##
+    # For comparing Floats.  Fails if +exp+ and +act+ have a relative error
+    # less than +epsilon+.
+
+    def refute_in_epsilon a, b, epsilon = 0.001, msg = nil
+      refute_in_delta a, b, a * epsilon, msg
+    end
+
+    ##
+    # Fails if +collection+ includes +obj+.
+
+    def refute_includes collection, obj, msg = nil
+      msg = message(msg) {
+        "Expected #{mu_pp(collection)} to not include #{mu_pp(obj)}"
+      }
+      assert_respond_to collection, :include?
+      refute collection.include?(obj), msg
+    end
+
+    ##
+    # Fails if +obj+ is an instance of +cls+.
+
+    def refute_instance_of cls, obj, msg = nil
+      msg = message(msg) {
+        "Expected #{mu_pp(obj)} to not be an instance of #{cls}"
+      }
+      refute obj.instance_of?(cls), msg
+    end
+
+    ##
+    # Fails if +obj+ is a kind of +cls+.
+
+    def refute_kind_of cls, obj, msg = nil # TODO: merge with instance_of
+      msg = message(msg) { "Expected #{mu_pp(obj)} to not be a kind of #{cls}" }
+      refute obj.kind_of?(cls), msg
+    end
+
+    ##
+    # Fails if +matcher+ <tt>=~</tt> +obj+.
+
+    def refute_match matcher, obj, msg = nil
+      msg = message(msg) {"Expected #{mu_pp matcher} to not match #{mu_pp obj}"}
+      assert_respond_to matcher, :"=~"
+      matcher = Regexp.new Regexp.escape matcher if String === matcher
+      refute matcher =~ obj, msg
+    end
+
+    ##
+    # Fails if +obj+ is nil.
+
+    def refute_nil obj, msg = nil
+      msg = message(msg) { "Expected #{mu_pp(obj)} to not be nil" }
+      refute obj.nil?, msg
+    end
+
+    ##
+    # Fails if +o1+ is not +op+ +o2+. Eg:
+    #
+    #   refute_operator 1, :>, 2 #=> pass
+    #   refute_operator 1, :<, 2 #=> fail
+
+    def refute_operator o1, op, o2 = UNDEFINED, msg = nil
+      return refute_predicate o1, op, msg if UNDEFINED == o2
+      msg = message(msg) { "Expected #{mu_pp(o1)} to not be #{op} #{mu_pp(o2)}"}
+      refute o1.__send__(op, o2), msg
+    end
+
+    ##
+    # For testing with predicates.
+    #
+    #   refute_predicate str, :empty?
+    #
+    # This is really meant for specs and is front-ended by refute_operator:
+    #
+    #   str.wont_be :empty?
+
+    def refute_predicate o1, op, msg = nil
+      msg = message(msg) { "Expected #{mu_pp(o1)} to not be #{op}" }
+      refute o1.__send__(op), msg
+    end
+
+    ##
+    # Fails if +obj+ responds to the message +meth+.
+
+    def refute_respond_to obj, meth, msg = nil
+      msg = message(msg) { "Expected #{mu_pp(obj)} to not respond to #{meth}" }
+
+      refute obj.respond_to?(meth), msg
+    end
+
+    ##
+    # Fails if +exp+ is the same (by object identity) as +act+.
+
+    def refute_same exp, act, msg = nil
+      msg = message(msg) {
+        data = [mu_pp(act), act.object_id, mu_pp(exp), exp.object_id]
+        "Expected %s (oid=%d) to not be the same as %s (oid=%d)" % data
+      }
+      refute exp.equal?(act), msg
+    end
+
+    ##
+    # Skips the current test. Gets listed at the end of the run but
+    # doesn't cause a failure exit code.
+
+    def skip msg = nil, bt = caller
+      msg ||= "Skipped, no message given"
+      @skip = true
+      raise MiniTest::Skip, msg, bt
+    end
+
+    ##
+    # Was this testcase skipped? Meant for #teardown.
+
+    def skipped?
+      defined?(@skip) and @skip
+    end
+
+    ##
+    # Takes a block and wraps it with the runner's shared mutex.
+
+    def synchronize
+      Minitest::Unit.runner.synchronize do
+        yield
+      end
+    end
+  end
+
+  class Unit # :nodoc:
+    VERSION = "4.7.4" # :nodoc:
+
+    attr_accessor :report, :failures, :errors, :skips # :nodoc:
+    attr_accessor :assertion_count                    # :nodoc:
+    attr_writer   :test_count                         # :nodoc:
+    attr_accessor :start_time                         # :nodoc:
+    attr_accessor :help                               # :nodoc:
+    attr_accessor :verbose                            # :nodoc:
+    attr_writer   :options                            # :nodoc:
+
+    ##
+    # :attr:
+    #
+    # if true, installs an "INFO" signal handler (only available to BSD and
+    # OS X users) which prints diagnostic information about the test run.
+    #
+    # This is auto-detected by default but may be overridden by custom
+    # runners.
+
+    attr_accessor :info_signal
+
+    ##
+    # Lazy accessor for options.
+
+    def options
+      @options ||= {}
+    end
+
+    @@installed_at_exit ||= false
+    @@out = $stdout
+    @@after_tests = []
+
+    ##
+    # A simple hook allowing you to run a block of code after _all_ of
+    # the tests are done. Eg:
+    #
+    #   MiniTest::Unit.after_tests { p $debugging_info }
+
+    def self.after_tests &block
+      @@after_tests << block
+    end
+
+    ##
+    # Registers MiniTest::Unit to run tests at process exit
+
+    def self.autorun
+      at_exit {
+        # don't run if there was a non-exit exception
+        next if $! and not $!.kind_of? SystemExit
+
+        # the order here is important. The at_exit handler must be
+        # installed before anyone else gets a chance to install their
+        # own, that way we can be assured that our exit will be last
+        # to run (at_exit stacks).
+        exit_code = nil
+
+        at_exit {
+          @@after_tests.reverse_each(&:call)
+          exit false if exit_code && exit_code != 0
+        }
+
+        exit_code = MiniTest::Unit.new.run ARGV
+      } unless @@installed_at_exit
+      @@installed_at_exit = true
+    end
+
+    ##
+    # Returns the stream to use for output.
+
+    def self.output
+      @@out
+    end
+
+    ##
+    # Sets MiniTest::Unit to write output to +stream+.  $stdout is the default
+    # output
+
+    def self.output= stream
+      @@out = stream
+    end
+
+    ##
+    # Tells MiniTest::Unit to delegate to +runner+, an instance of a
+    # MiniTest::Unit subclass, when MiniTest::Unit#run is called.
+
+    def self.runner= runner
+      @@runner = runner
+    end
+
+    ##
+    # Returns the MiniTest::Unit subclass instance that will be used
+    # to run the tests. A MiniTest::Unit instance is the default
+    # runner.
+
+    def self.runner
+      @@runner ||= self.new
+    end
+
+    ##
+    # Return all plugins' run methods (methods that start with "run_").
+
+    def self.plugins
+      @@plugins ||= (["run_tests"] +
+                     public_instance_methods(false).
+                     grep(/^run_/).map { |s| s.to_s }).uniq
+    end
+
+    ##
+    # Return the IO for output.
+
+    def output
+      self.class.output
+    end
+
+    def puts *a  # :nodoc:
+      output.puts(*a)
+    end
+
+    def print *a # :nodoc:
+      output.print(*a)
+    end
+
+    def test_count # :nodoc:
+      @test_count ||= 0
+    end
+
+    ##
+    # Runner for a given +type+ (eg, test vs bench).
+
+    def _run_anything type
+      suites = TestCase.send "#{type}_suites"
+      return if suites.empty?
+
+      start = Time.now
+
+      puts
+      puts "# Running #{type}s:"
+      puts
+
+      @test_count, @assertion_count = 0, 0
+      sync = output.respond_to? :"sync=" # stupid emacs
+      old_sync, output.sync = output.sync, true if sync
+
+      results = _run_suites suites, type
+
+      @test_count      = results.inject(0) { |sum, (tc, _)| sum + tc }
+      @assertion_count = results.inject(0) { |sum, (_, ac)| sum + ac }
+
+      output.sync = old_sync if sync
+
+      t = Time.now - start
+
+      puts
+      puts
+      puts "Finished #{type}s in %.6fs, %.4f tests/s, %.4f assertions/s." %
+        [t, test_count / t, assertion_count / t]
+
+      report.each_with_index do |msg, i|
+        puts "\n%3d) %s" % [i + 1, msg]
+      end
+
+      puts
+
+      status
+    end
+
+    ##
+    # Runs all the +suites+ for a given +type+.
+    #
+    # NOTE: this method is redefined in parallel_each.rb, which is
+    # loaded if a test-suite calls parallelize_me!.
+
+    def _run_suites suites, type
+      suites.map { |suite| _run_suite suite, type }
+    end
+
+    ##
+    # Run a single +suite+ for a given +type+.
+
+    def _run_suite suite, type
+      header = "#{type}_suite_header"
+      puts send(header, suite) if respond_to? header
+
+      filter = options[:filter] || '/./'
+      filter = Regexp.new $1 if filter =~ /\/(.*)\//
+
+      all_test_methods = suite.send "#{type}_methods"
+
+      filtered_test_methods = all_test_methods.find_all { |m|
+        filter === m || filter === "#{suite}##{m}"
+      }
+
+      assertions = filtered_test_methods.map { |method|
+        inst = suite.new method
+        inst._assertions = 0
+
+        print "#{suite}##{method} = " if @verbose
+
+        start_time = Time.now if @verbose
+        result = inst.run self
+
+        print "%.2f s = " % (Time.now - start_time) if @verbose
+        print result
+        puts if @verbose
+
+        inst._assertions
+      }
+
+      return assertions.size, assertions.inject(0) { |sum, n| sum + n }
+    end
+
+    ##
+    # Record the result of a single test. Makes it very easy to gather
+    # information. Eg:
+    #
+    #   class StatisticsRecorder < MiniTest::Unit
+    #     def record suite, method, assertions, time, error
+    #       # ... record the results somewhere ...
+    #     end
+    #   end
+    #
+    #   MiniTest::Unit.runner = StatisticsRecorder.new
+    #
+    # NOTE: record might be sent more than once per test.  It will be
+    # sent once with the results from the test itself.  If there is a
+    # failure or error in teardown, it will be sent again with the
+    # error or failure.
+
+    def record suite, method, assertions, time, error
+    end
+
+    def location e # :nodoc:
+      last_before_assertion = ""
+      e.backtrace.reverse_each do |s|
+        break if s =~ /in .(assert|refute|flunk|pass|fail|raise|must|wont)/
+        last_before_assertion = s
+      end
+      last_before_assertion.sub(/:in .*$/, '')
+    end
+
+    ##
+    # Writes status for failed test +meth+ in +klass+ which finished with
+    # exception +e+
+
+    def puke klass, meth, e
+      e = case e
+          when MiniTest::Skip then
+            @skips += 1
+            return "S" unless @verbose
+            "Skipped:\n#{klass}##{meth} [#{location e}]:\n#{e.message}\n"
+          when MiniTest::Assertion then
+            @failures += 1
+            "Failure:\n#{klass}##{meth} [#{location e}]:\n#{e.message}\n"
+          else
+            @errors += 1
+            bt = MiniTest::filter_backtrace(e.backtrace).join "\n    "
+            "Error:\n#{klass}##{meth}:\n#{e.class}: #{e.message}\n    #{bt}\n"
+          end
+      @report << e
+      e[0, 1]
+    end
+
+    def initialize # :nodoc:
+      @report = []
+      @errors = @failures = @skips = 0
+      @verbose = false
+      @mutex = defined?(Mutex) ? Mutex.new : nil
+      @info_signal = Signal.list['INFO']
+    end
+
+    def synchronize # :nodoc:
+      if @mutex then
+        @mutex.synchronize { yield }
+      else
+        yield
+      end
+    end
+
+    def process_args args = [] # :nodoc:
+      options = {}
+      orig_args = args.dup
+
+      OptionParser.new do |opts|
+        opts.banner  = 'minitest options:'
+        opts.version = MiniTest::Unit::VERSION
+
+        opts.on '-h', '--help', 'Display this help.' do
+          puts opts
+          exit
+        end
+
+        opts.on '-s', '--seed SEED', Integer, "Sets random seed" do |m|
+          options[:seed] = m.to_i
+        end
+
+        opts.on '-v', '--verbose', "Verbose. Show progress processing files." do
+          options[:verbose] = true
+        end
+
+        opts.on '-n', '--name PATTERN', "Filter test names on pattern (e.g. /foo/)" do |a|
+          options[:filter] = a
+        end
+
+        opts.parse! args
+        orig_args -= args
+      end
+
+      unless options[:seed] then
+        srand
+        options[:seed] = srand % 0xFFFF
+        orig_args << "--seed" << options[:seed].to_s
+      end
+
+      srand options[:seed]
+
+      self.verbose = options[:verbose]
+      @help = orig_args.map { |s| s =~ /[\s|&<>$()]/ ? s.inspect : s }.join " "
+
+      options
+    end
+
+    ##
+    # Begins the full test run. Delegates to +runner+'s #_run method.
+
+    def run args = []
+      self.class.runner._run(args)
+    end
+
+    ##
+    # Top level driver, controls all output and filtering.
+
+    def _run args = []
+      args = process_args args # ARGH!! blame test/unit process_args
+      self.options.merge! args
+
+      puts "Run options: #{help}"
+
+      self.class.plugins.each do |plugin|
+        send plugin
+        break unless report.empty?
+      end
+
+      return failures + errors if self.test_count > 0 # or return nil...
+    rescue Interrupt
+      abort 'Interrupted'
+    end
+
+    ##
+    # Runs test suites matching +filter+.
+
+    def run_tests
+      _run_anything :test
+    end
+
+    ##
+    # Writes status to +io+
+
+    def status io = self.output
+      format = "%d tests, %d assertions, %d failures, %d errors, %d skips"
+      io.puts format % [test_count, assertion_count, failures, errors, skips]
+    end
+
+    ##
+    # Provides a simple set of guards that you can use in your tests
+    # to skip execution if it is not applicable. These methods are
+    # mixed into TestCase as both instance and class methods so you
+    # can use them inside or outside of the test methods.
+    #
+    #   def test_something_for_mri
+    #     skip "bug 1234"  if jruby?
+    #     # ...
+    #   end
+    #
+    #   if windows? then
+    #     # ... lots of test methods ...
+    #   end
+
+    module Guard
+
+      ##
+      # Is this running on jruby?
+
+      def jruby? platform = RUBY_PLATFORM
+        "java" == platform
+      end
+
+      ##
+      # Is this running on mri?
+
+      def maglev? platform = defined?(RUBY_ENGINE) && RUBY_ENGINE
+        "maglev" == platform
+      end
+
+      module_function :maglev?
+
+      ##
+      # Is this running on mri?
+
+      def mri? platform = RUBY_DESCRIPTION
+        /^ruby/ =~ platform
+      end
+
+      ##
+      # Is this running on rubinius?
+
+      def rubinius? platform = defined?(RUBY_ENGINE) && RUBY_ENGINE
+        "rbx" == platform
+      end
+
+      ##
+      # Is this running on windows?
+
+      def windows? platform = RUBY_PLATFORM
+        /mswin|mingw/ =~ platform
+      end
+    end
+
+    ##
+    # Provides before/after hooks for setup and teardown. These are
+    # meant for library writers, NOT for regular test authors. See
+    # #before_setup for an example.
+
+    module LifecycleHooks
+      ##
+      # Runs before every test, after setup. This hook is meant for
+      # libraries to extend minitest. It is not meant to be used by
+      # test developers.
+      #
+      # See #before_setup for an example.
+
+      def after_setup; end
+
+      ##
+      # Runs before every test, before setup. This hook is meant for
+      # libraries to extend minitest. It is not meant to be used by
+      # test developers.
+      #
+      # As a simplistic example:
+      #
+      #   module MyMinitestPlugin
+      #     def before_setup
+      #       super
+      #       # ... stuff to do before setup is run
+      #     end
+      #
+      #     def after_setup
+      #       # ... stuff to do after setup is run
+      #       super
+      #     end
+      #
+      #     def before_teardown
+      #       super
+      #       # ... stuff to do before teardown is run
+      #     end
+      #
+      #     def after_teardown
+      #       # ... stuff to do after teardown is run
+      #       super
+      #     end
+      #   end
+      #
+      #   class MiniTest::Unit::TestCase
+      #     include MyMinitestPlugin
+      #   end
+
+      def before_setup; end
+
+      ##
+      # Runs after every test, before teardown. This hook is meant for
+      # libraries to extend minitest. It is not meant to be used by
+      # test developers.
+      #
+      # See #before_setup for an example.
+
+      def before_teardown; end
+
+      ##
+      # Runs after every test, after teardown. This hook is meant for
+      # libraries to extend minitest. It is not meant to be used by
+      # test developers.
+      #
+      # See #before_setup for an example.
+
+      def after_teardown; end
+    end
+
+    ##
+    # Subclass TestCase to create your own tests. Typically you'll want a
+    # TestCase subclass per implementation class.
+    #
+    # See MiniTest::Assertions
+
+    class TestCase
+      include LifecycleHooks
+      include Guard
+      extend Guard
+
+      attr_reader :__name__ # :nodoc:
+
+      PASSTHROUGH_EXCEPTIONS = [NoMemoryError, SignalException,
+                                Interrupt, SystemExit] # :nodoc:
+
+      ##
+      # Runs the tests reporting the status to +runner+
+
+      def run runner
+        trap "INFO" do
+          runner.report.each_with_index do |msg, i|
+            warn "\n%3d) %s" % [i + 1, msg]
+          end
+          warn ''
+          time = runner.start_time ? Time.now - runner.start_time : 0
+          warn "Current Test: %s#%s %.2fs" % [self.class, self.__name__, time]
+          runner.status $stderr
+        end if runner.info_signal
+
+        start_time = Time.now
+
+        result = ""
+        begin
+          @passed = nil
+          self.before_setup
+          self.setup
+          self.after_setup
+          self.run_test self.__name__
+          result = "." unless io?
+          time = Time.now - start_time
+          runner.record self.class, self.__name__, self._assertions, time, nil
+          @passed = true
+        rescue *PASSTHROUGH_EXCEPTIONS
+          raise
+        rescue Exception => e
+          @passed = Skip === e
+          time = Time.now - start_time
+          runner.record self.class, self.__name__, self._assertions, time, e
+          result = runner.puke self.class, self.__name__, e
+        ensure
+          %w{ before_teardown teardown after_teardown }.each do |hook|
+            begin
+              self.send hook
+            rescue *PASSTHROUGH_EXCEPTIONS
+              raise
+            rescue Exception => e
+              @passed = false
+              runner.record self.class, self.__name__, self._assertions, time, e
+              result = runner.puke self.class, self.__name__, e
+            end
+          end
+          trap 'INFO', 'DEFAULT' if runner.info_signal
+        end
+        result
+      end
+
+      alias :run_test :__send__
+
+      def initialize name # :nodoc:
+        @__name__ = name
+        @__io__ = nil
+        @passed = nil
+        @@current = self # FIX: make thread local
+      end
+
+      def self.current # :nodoc:
+        @@current # FIX: make thread local
+      end
+
+      ##
+      # Return the output IO object
+
+      def io
+        @__io__ = true
+        MiniTest::Unit.output
+      end
+
+      ##
+      # Have we hooked up the IO yet?
+
+      def io?
+        @__io__
+      end
+
+      def self.reset # :nodoc:
+        @@test_suites = {}
+      end
+
+      reset
+
+      ##
+      # Call this at the top of your tests when you absolutely
+      # positively need to have ordered tests. In doing so, you're
+      # admitting that you suck and your tests are weak.
+
+      def self.i_suck_and_my_tests_are_order_dependent!
+        class << self
+          undef_method :test_order if method_defined? :test_order
+          define_method :test_order do :alpha end
+        end
+      end
+
+      ##
+      # Make diffs for this TestCase use #pretty_inspect so that diff
+      # in assert_equal can be more details. NOTE: this is much slower
+      # than the regular inspect but much more usable for complex
+      # objects.
+
+      def self.make_my_diffs_pretty!
+        require 'pp'
+
+        define_method :mu_pp do |o|
+          o.pretty_inspect
+        end
+      end
+
+      ##
+      # Call this at the top of your tests when you want to run your
+      # tests in parallel. In doing so, you're admitting that you rule
+      # and your tests are awesome.
+
+      def self.parallelize_me!
+        require "minitest/parallel_each"
+
+        class << self
+          undef_method :test_order if method_defined? :test_order
+          define_method :test_order do :parallel end
+        end
+      end
+
+      def self.inherited klass # :nodoc:
+        @@test_suites[klass] = true
+        super
+      end
+
+      def self.test_order # :nodoc:
+        :random
+      end
+
+      def self.test_suites # :nodoc:
+        @@test_suites.keys.sort_by { |ts| ts.name.to_s }
+      end
+
+      def self.test_methods # :nodoc:
+        methods = public_instance_methods(true).grep(/^test/).map { |m| m.to_s }
+
+        case self.test_order
+        when :parallel
+          max = methods.size
+          ParallelEach.new methods.sort.sort_by { rand max }
+        when :random then
+          max = methods.size
+          methods.sort.sort_by { rand max }
+        when :alpha, :sorted then
+          methods.sort
+        else
+          raise "Unknown test_order: #{self.test_order.inspect}"
+        end
+      end
+
+      ##
+      # Returns true if the test passed.
+
+      def passed?
+        @passed
+      end
+
+      ##
+      # Runs before every test. Use this to set up before each test
+      # run.
+
+      def setup; end
+
+      ##
+      # Runs after every test. Use this to clean up after each test
+      # run.
+
+      def teardown; end
+
+      include MiniTest::Assertions
+    end # class TestCase
+  end # class Unit
+end # module MiniTest
+
+Minitest = MiniTest # :nodoc: because ugh... I typo this all the time