ceedling 0.28.1 → 0.28.2

data/vendor/c_exception/vendor/unity/auto/stylize_as_junit.rb

@@ -1,252 +0,0 @@
-#!/usr/bin/ruby
-#
-# unity_to_junit.rb
-#
-require 'fileutils'
-require 'optparse'
-require 'ostruct'
-require 'set'
-
-require 'pp'
-
-VERSION = 1.0
-
-class ArgvParser
-  #
-  # Return a structure describing the options.
-  #
-  def self.parse(args)
-    # The options specified on the command line will be collected in *options*.
-    # We set default values here.
-    options = OpenStruct.new
-    options.results_dir = '.'
-    options.root_path = '.'
-    options.out_file = 'results.xml'
-
-    opts = OptionParser.new do |o|
-      o.banner = 'Usage: unity_to_junit.rb [options]'
-
-      o.separator ''
-      o.separator 'Specific options:'
-
-      o.on('-r', '--results <dir>', 'Look for Unity Results files here.') do |results|
-        # puts "results #{results}"
-        options.results_dir = results
-      end
-
-      o.on('-p', '--root_path <path>', 'Prepend this path to files in results.') do |root_path|
-        options.root_path = root_path
-      end
-
-      o.on('-o', '--output <filename>', 'XML file to generate.') do |out_file|
-        # puts "out_file: #{out_file}"
-        options.out_file = out_file
-      end
-
-      o.separator ''
-      o.separator 'Common options:'
-
-      # No argument, shows at tail.  This will print an options summary.
-      o.on_tail('-h', '--help', 'Show this message') do
-        puts o
-        exit
-      end
-
-      # Another typical switch to print the version.
-      o.on_tail('--version', 'Show version') do
-        puts "unity_to_junit.rb version #{VERSION}"
-        exit
-      end
-    end
-
-    opts.parse!(args)
-    options
-  end # parse()
-end # class OptparseExample
-
-class UnityToJUnit
-  include FileUtils::Verbose
-  attr_reader :report, :total_tests, :failures, :ignored
-  attr_writer :targets, :root, :out_file
-
-  def initialize
-    @report = ''
-    @unit_name = ''
-  end
-
-  def run
-    # Clean up result file names
-    results = @targets.map { |target| target.tr('\\', '/') }
-    # puts "Output File: #{@out_file}"
-    f = File.new(@out_file, 'w')
-    write_xml_header(f)
-    write_suites_header(f)
-    results.each do |result_file|
-      lines = File.readlines(result_file).map(&:chomp)
-
-      raise "Empty test result file: #{result_file}" if lines.empty?
-
-      result_output = get_details(result_file, lines)
-      tests, failures, ignored = parse_test_summary(lines)
-      result_output[:counts][:total] = tests
-      result_output[:counts][:failed] = failures
-      result_output[:counts][:ignored] = ignored
-      result_output[:counts][:passed] = (result_output[:counts][:total] - result_output[:counts][:failed] - result_output[:counts][:ignored])
-
-      # use line[0] from the test output to get the test_file path and name
-      test_file_str = lines[0].tr('\\', '/')
-      test_file_str = test_file_str.split(':')
-      test_file = if test_file_str.length < 2
-                    result_file
-                  else
-                    test_file_str[0] + ':' + test_file_str[1]
-                  end
-      result_output[:source][:path] = File.dirname(test_file)
-      result_output[:source][:file] = File.basename(test_file)
-
-      # save result_output
-      @unit_name = File.basename(test_file, '.*')
-
-      write_suite_header(result_output[:counts], f)
-      write_failures(result_output, f)
-      write_tests(result_output, f)
-      write_ignored(result_output, f)
-      write_suite_footer(f)
-    end
-    write_suites_footer(f)
-    f.close
-  end
-
-  def usage(err_msg = nil)
-    puts "\nERROR: "
-    puts err_msg if err_msg
-    puts 'Usage: unity_to_junit.rb [options]'
-    puts ''
-    puts 'Specific options:'
-    puts '    -r, --results <dir>              Look for Unity Results files here.'
-    puts '    -p, --root_path <path>           Prepend this path to files in results.'
-    puts '    -o, --output <filename>          XML file to generate.'
-    puts ''
-    puts 'Common options:'
-    puts '    -h, --help                       Show this message'
-    puts '        --version                    Show version'
-
-    exit 1
-  end
-
-  protected
-
-  def get_details(_result_file, lines)
-    results = results_structure
-    lines.each do |line|
-      line = line.tr('\\', '/')
-      _src_file, src_line, test_name, status, msg = line.split(/:/)
-      case status
-      when 'IGNORE' then results[:ignores] << { test: test_name, line: src_line, message: msg }
-      when 'FAIL'   then results[:failures] << { test: test_name, line: src_line, message: msg }
-      when 'PASS'   then results[:successes] << { test: test_name, line: src_line, message: msg }
-      end
-    end
-    results
-  end
-
-  def parse_test_summary(summary)
-    raise "Couldn't parse test results: #{summary}" unless summary.find { |v| v =~ /(\d+) Tests (\d+) Failures (\d+) Ignored/ }
-    [Regexp.last_match(1).to_i, Regexp.last_match(2).to_i, Regexp.last_match(3).to_i]
-  end
-
-  def here
-    File.expand_path(File.dirname(__FILE__))
-  end
-
-  private
-
-  def results_structure
-    {
-      source: { path: '', file: '' },
-      successes: [],
-      failures: [],
-      ignores: [],
-      counts: { total: 0, passed: 0, failed: 0, ignored: 0 },
-      stdout: []
-    }
-  end
-
-  def write_xml_header(stream)
-    stream.puts "<?xml version='1.0' encoding='utf-8' ?>"
-  end
-
-  def write_suites_header(stream)
-    stream.puts '<testsuites>'
-  end
-
-  def write_suite_header(counts, stream)
-    stream.puts "\t<testsuite errors=\"0\" skipped=\"#{counts[:ignored]}\" failures=\"#{counts[:failed]}\" tests=\"#{counts[:total]}\" name=\"unity\">"
-  end
-
-  def write_failures(results, stream)
-    result = results[:failures]
-    result.each do |item|
-      filename = File.join(results[:source][:path], File.basename(results[:source][:file], '.*'))
-      stream.puts "\t\t<testcase classname=\"#{@unit_name}\" name=\"#{item[:test]}\" time=\"0\">"
-      stream.puts "\t\t\t<failure message=\"#{item[:message]}\" type=\"Assertion\"/>"
-      stream.puts "\t\t\t<system-err>&#xD;[File] #{filename}&#xD;[Line] #{item[:line]}&#xD;</system-err>"
-      stream.puts "\t\t</testcase>"
-    end
-  end
-
-  def write_tests(results, stream)
-    result = results[:successes]
-    result.each do |item|
-      stream.puts "\t\t<testcase classname=\"#{@unit_name}\" name=\"#{item[:test]}\" time=\"0\" />"
-    end
-  end
-
-  def write_ignored(results, stream)
-    result = results[:ignores]
-    result.each do |item|
-      filename = File.join(results[:source][:path], File.basename(results[:source][:file], '.*'))
-      puts "Writing ignored tests for test harness: #{filename}"
-      stream.puts "\t\t<testcase classname=\"#{@unit_name}\" name=\"#{item[:test]}\" time=\"0\">"
-      stream.puts "\t\t\t<skipped message=\"#{item[:message]}\" type=\"Assertion\"/>"
-      stream.puts "\t\t\t<system-err>&#xD;[File] #{filename}&#xD;[Line] #{item[:line]}&#xD;</system-err>"
-      stream.puts "\t\t</testcase>"
-    end
-  end
-
-  def write_suite_footer(stream)
-    stream.puts "\t</testsuite>"
-  end
-
-  def write_suites_footer(stream)
-    stream.puts '</testsuites>'
-  end
-end # UnityToJUnit
-
-if __FILE__ == $0
-  # parse out the command options
-  options = ArgvParser.parse(ARGV)
-
-  # create an instance to work with
-  utj = UnityToJUnit.new
-  begin
-    # look in the specified or current directory for result files
-    targets = "#{options.results_dir.tr('\\', '/')}**/*.test*"
-
-    results = Dir[targets]
-    raise "No *.testpass, *.testfail, or *.testresults files found in '#{targets}'" if results.empty?
-    utj.targets = results
-
-    # set the root path
-    utj.root = options.root_path
-
-    # set the output XML file name
-    # puts "Output File from options: #{options.out_file}"
-    utj.out_file = options.out_file
-
-    # run the summarizer
-    puts utj.run
-  rescue StandardError => e
-    utj.usage e.message
-  end
-end

data/vendor/c_exception/vendor/unity/auto/test_file_filter.rb

@@ -1,25 +0,0 @@
-# ==========================================
-#   Unity Project - A Test Framework for C
-#   Copyright (c) 2007 Mike Karlesky, Mark VanderVoord, Greg Williams
-#   [Released under MIT License. Please refer to license.txt for details]
-# ==========================================
-
-require'yaml'
-
-module RakefileHelpers
-  class TestFileFilter
-    def initialize(all_files = false)
-      @all_files = all_files
-
-      return false unless @all_files
-      return false unless File.exist?('test_file_filter.yml')
-
-      filters = YAML.load_file('test_file_filter.yml')
-      @all_files = filters[:all_files]
-      @only_files = filters[:only_files]
-      @exclude_files = filters[:exclude_files]
-    end
-
-    attr_accessor :all_files, :only_files, :exclude_files
-  end
-end

data/vendor/c_exception/vendor/unity/auto/type_sanitizer.rb

@@ -1,6 +0,0 @@
-module TypeSanitizer
-  def self.sanitize_c_identifier(unsanitized)
-    # convert filename to valid C identifier by replacing invalid chars with '_'
-    unsanitized.gsub(/[-\/\\\.\,\s]/, '_')
-  end
-end

data/vendor/c_exception/vendor/unity/auto/unity_test_summary.py

@@ -1,139 +0,0 @@
-#! python3
-# ==========================================
-#   Unity Project - A Test Framework for C
-#   Copyright (c) 2015 Alexander Mueller / XelaRellum@web.de
-#   [Released under MIT License. Please refer to license.txt for details]
-#   Based on the ruby script by  Mike Karlesky, Mark VanderVoord, Greg Williams
-# ==========================================
-import sys
-import os
-import re
-from glob import glob
-
-class UnityTestSummary:
-    def __init__(self):
-        self.report = ''
-        self.total_tests = 0
-        self.failures = 0
-        self.ignored = 0
-
-    def run(self):
-        # Clean up result file names
-        results = []
-        for target in self.targets:
-            results.append(target.replace('\\', '/'))
-
-        # Dig through each result file, looking for details on pass/fail:
-        failure_output = []
-        ignore_output = []
-
-        for result_file in results:
-            lines = list(map(lambda line: line.rstrip(), open(result_file, "r").read().split('\n')))
-            if len(lines) == 0:
-                raise Exception("Empty test result file: %s" % result_file)
-
-            details = self.get_details(result_file, lines)
-            failures = details['failures']
-            ignores = details['ignores']
-            if len(failures) > 0: failure_output.append('\n'.join(failures))
-            if len(ignores) > 0: ignore_output.append('n'.join(ignores))
-            tests,failures,ignored = self.parse_test_summary('\n'.join(lines))
-            self.total_tests += tests
-            self.failures += failures
-            self.ignored += ignored
-
-        if self.ignored > 0:
-            self.report += "\n"
-            self.report += "--------------------------\n"
-            self.report += "UNITY IGNORED TEST SUMMARY\n"
-            self.report += "--------------------------\n"
-            self.report += "\n".join(ignore_output)
-
-        if self.failures > 0:
-            self.report += "\n"
-            self.report += "--------------------------\n"
-            self.report += "UNITY FAILED TEST SUMMARY\n"
-            self.report += "--------------------------\n"
-            self.report += '\n'.join(failure_output)
-
-        self.report += "\n"
-        self.report += "--------------------------\n"
-        self.report += "OVERALL UNITY TEST SUMMARY\n"
-        self.report += "--------------------------\n"
-        self.report += "{total_tests} TOTAL TESTS {failures} TOTAL FAILURES {ignored} IGNORED\n".format(total_tests = self.total_tests, failures=self.failures, ignored=self.ignored)
-        self.report += "\n"
-
-        return self.report
-
-    def set_targets(self, target_array):
-            self.targets = target_array
-
-    def set_root_path(self, path):
-        self.root = path
-
-    def usage(self, err_msg=None):
-        print("\nERROR: ")
-        if err_msg:
-            print(err_msg)
-        print("\nUsage: unity_test_summary.py result_file_directory/ root_path/")
-        print("     result_file_directory - The location of your results files.")
-        print("                             Defaults to current directory if not specified.")
-        print("                             Should end in / if specified.")
-        print("     root_path - Helpful for producing more verbose output if using relative paths.")
-        sys.exit(1)
-
-    def get_details(self, result_file, lines):
-        results = { 'failures': [], 'ignores': [], 'successes': [] }
-        for line in lines:
-            parts = line.split(':')
-            if len(parts) == 5:
-                src_file,src_line,test_name,status,msg = parts
-            elif len(parts) == 4:
-                src_file,src_line,test_name,status = parts
-                msg = ''
-            else:
-                continue
-            if len(self.root) > 0:
-                line_out = "%s%s" % (self.root, line)
-            else:
-                line_out = line
-            if status == 'IGNORE':
-                results['ignores'].append(line_out)
-            elif status == 'FAIL':
-                results['failures'].append(line_out)
-            elif status == 'PASS':
-                results['successes'].append(line_out)
-        return results
-
-    def parse_test_summary(self, summary):
-        m = re.search(r"([0-9]+) Tests ([0-9]+) Failures ([0-9]+) Ignored", summary)
-        if not m:
-            raise Exception("Couldn't parse test results: %s" % summary)
-
-        return int(m.group(1)), int(m.group(2)), int(m.group(3))
-
-
-if __name__ == '__main__':
-  uts = UnityTestSummary()
-  try:
-    #look in the specified or current directory for result files
-    if len(sys.argv) > 1:
-        targets_dir = sys.argv[1]
-    else:
-        targets_dir = './'
-    targets = list(map(lambda x: x.replace('\\', '/'), glob(targets_dir + '*.test*')))
-    if len(targets) == 0:
-        raise Exception("No *.testpass or *.testfail files found in '%s'" % targets_dir)
-    uts.set_targets(targets)
-
-    #set the root path
-    if len(sys.argv) > 2:
-        root_path = sys.argv[2]
-    else:
-        root_path = os.path.split(__file__)[0]
-    uts.set_root_path(root_path)
-
-    #run the summarizer
-    print(uts.run())
-  except Exception as e:
-    uts.usage(e)

data/vendor/c_exception/vendor/unity/auto/unity_test_summary.rb

@@ -1,136 +0,0 @@
-# ==========================================
-#   Unity Project - A Test Framework for C
-#   Copyright (c) 2007 Mike Karlesky, Mark VanderVoord, Greg Williams
-#   [Released under MIT License. Please refer to license.txt for details]
-# ==========================================
-
-# !/usr/bin/ruby
-#
-# unity_test_summary.rb
-#
-require 'fileutils'
-require 'set'
-
-class UnityTestSummary
-  include FileUtils::Verbose
-
-  attr_reader :report, :total_tests, :failures, :ignored
-  attr_writer :targets, :root
-
-  def initialize(_opts = {})
-    @report = ''
-    @total_tests = 0
-    @failures = 0
-    @ignored = 0
-  end
-
-  def run
-    # Clean up result file names
-    results = @targets.map { |target| target.tr('\\', '/') }
-
-    # Dig through each result file, looking for details on pass/fail:
-    failure_output = []
-    ignore_output = []
-
-    results.each do |result_file|
-      lines = File.readlines(result_file).map(&:chomp)
-
-      raise "Empty test result file: #{result_file}" if lines.empty?
-
-      output = get_details(result_file, lines)
-      failure_output << output[:failures] unless output[:failures].empty?
-      ignore_output  << output[:ignores]  unless output[:ignores].empty?
-      tests, failures, ignored = parse_test_summary(lines)
-      @total_tests += tests
-      @failures += failures
-      @ignored += ignored
-    end
-
-    if @ignored > 0
-      @report += "\n"
-      @report += "--------------------------\n"
-      @report += "UNITY IGNORED TEST SUMMARY\n"
-      @report += "--------------------------\n"
-      @report += ignore_output.flatten.join("\n")
-    end
-
-    if @failures > 0
-      @report += "\n"
-      @report += "--------------------------\n"
-      @report += "UNITY FAILED TEST SUMMARY\n"
-      @report += "--------------------------\n"
-      @report += failure_output.flatten.join("\n")
-    end
-
-    @report += "\n"
-    @report += "--------------------------\n"
-    @report += "OVERALL UNITY TEST SUMMARY\n"
-    @report += "--------------------------\n"
-    @report += "#{@total_tests} TOTAL TESTS #{@failures} TOTAL FAILURES #{@ignored} IGNORED\n"
-    @report += "\n"
-  end
-
-  def usage(err_msg = nil)
-    puts "\nERROR: "
-    puts err_msg if err_msg
-    puts "\nUsage: unity_test_summary.rb result_file_directory/ root_path/"
-    puts '     result_file_directory - The location of your results files.'
-    puts '                             Defaults to current directory if not specified.'
-    puts '                             Should end in / if specified.'
-    puts '     root_path - Helpful for producing more verbose output if using relative paths.'
-    exit 1
-  end
-
-  protected
-
-  def get_details(_result_file, lines)
-    results = { failures: [], ignores: [], successes: [] }
-    lines.each do |line|
-      _src_file, _src_line, _test_name, status, _msg = line.split(/:/)
-      line_out = (@root && (@root != 0) ? "#{@root}#{line}" : line).gsub(/\//, '\\')
-      case status
-      when 'IGNORE' then results[:ignores]   << line_out
-      when 'FAIL'   then results[:failures]  << line_out
-      when 'PASS'   then results[:successes] << line_out
-      end
-    end
-    results
-  end
-
-  def parse_test_summary(summary)
-    raise "Couldn't parse test results: #{summary}" unless summary.find { |v| v =~ /(\d+) Tests (\d+) Failures (\d+) Ignored/ }
-    [Regexp.last_match(1).to_i, Regexp.last_match(2).to_i, Regexp.last_match(3).to_i]
-  end
-
-  def here
-    File.expand_path(File.dirname(__FILE__))
-  end
-end
-
-if $0 == __FILE__
-
-  # parse out the command options
-  opts, args = ARGV.partition { |v| v =~ /^--\w+/ }
-  opts.map! { |v| v[2..-1].to_sym }
-
-  # create an instance to work with
-  uts = UnityTestSummary.new(opts)
-
-  begin
-    # look in the specified or current directory for result files
-    args[0] ||= './'
-    targets = "#{ARGV[0].tr('\\', '/')}**/*.test*"
-    results = Dir[targets]
-    raise "No *.testpass, *.testfail, or *.testresults files found in '#{targets}'" if results.empty?
-    uts.targets = results
-
-    # set the root path
-    args[1] ||= Dir.pwd + '/'
-    uts.root = ARGV[1]
-
-    # run the summarizer
-    puts uts.run
-  rescue StandardError => e
-    uts.usage e.message
-  end
-end