burn 0.1.0 → 0.1.1

data/lib/burn/tools/mac/cc65/asminc/joy-error.inc

@@ -1,44 +0,0 @@
-;/*****************************************************************************/
-;/*                                                                           */
-;/*                              joy-error.inc                                */
-;/*                                                                           */
-;/*                         Joystick error codes                              */
-;/*                                                                           */
-;/*                                                                           */
-;/*                                                                           */
-;/* (C) 2002      Ullrich von Bassewitz                                       */
-;/*               Wacholderweg 14                                             */
-;/*               D-70597 Stuttgart                                           */
-;/* EMail:        uz@musoftware.de                                            */
-;/*                                                                           */
-;/*                                                                           */
-;/* This software is provided 'as-is', without any expressed or implied       */
-;/* warranty.  In no event will the authors be held liable for any damages    */
-;/* arising from the use of this software.                                    */
-;/*                                                                           */
-;/* Permission is granted to anyone to use this software for any purpose,     */
-;/* including commercial applications, and to alter it and redistribute it    */
-;/* freely, subject to the following restrictions:                            */
-;/*                                                                           */
-;/* 1. The origin of this software must not be misrepresented; you must not   */
-;/*    claim that you wrote the original software. If you use this software   */
-;/*    in a product, an acknowledgment in the product documentation would be  */
-;/*    appreciated but is not required.                                       */
-;/* 2. Altered source versions must be plainly marked as such, and must not   */
-;/*    be misrepresented as being the original software.                      */
-;/* 3. This notice may not be removed or altered from any source              */
-;/*    distribution.                                                          */
-;/*                                                                           */
-;/*****************************************************************************/
-
-
-
-; Error codes
-JOY_ERR_OK              = 0       ; No error
-JOY_ERR_NO_DRIVER       = 1       ; No driver available
-JOY_ERR_CANNOT_LOAD     = 2       ; Error loading driver
-JOY_ERR_INV_DRIVER      = 3       ; Invalid driver
-JOY_ERR_NO_DEVICE       = 4       ; Device (hardware) not found
-
-
-

data/lib/burn/tools/mac/cc65/asminc/joy-kernel.inc

@@ -1,85 +0,0 @@
-;/*****************************************************************************/
-;/*                                                                           */
-;/*                              joy-kernel.inc                               */
-;/*                                                                           */
-;/*                    Internally used joystick functions                     */
-;/*                                                                           */
-;/*                                                                           */
-;/*                                                                           */
-;/* (C) 2002-2006, Ullrich von Bassewitz                                      */
-;/*                R�merstra�e 52                                             */
-;/*                D-70794 Filderstadt                                        */
-;/* EMail:         uz@cc65.org                                                */
-;/*                                                                           */
-;/*                                                                           */
-;/* This software is provided 'as-is', without any expressed or implied       */
-;/* warranty.  In no event will the authors be held liable for any damages    */
-;/* arising from the use of this software.                                    */
-;/*                                                                           */
-;/* Permission is granted to anyone to use this software for any purpose,     */
-;/* including commercial applications, and to alter it and redistribute it    */
-;/* freely, subject to the following restrictions:                            */
-;/*                                                                           */
-;/* 1. The origin of this software must not be misrepresented; you must not   */
-;/*    claim that you wrote the original software. If you use this software   */
-;/*    in a product, an acknowledgment in the product documentation would be  */
-;/*    appreciated but is not required.                                       */
-;/* 2. Altered source versions must be plainly marked as such, and must not   */
-;/*    be misrepresented as being the original software.                      */
-;/* 3. This notice may not be removed or altered from any source              */
-;/*    distribution.                                                          */
-;/*                                                                           */
-;/*****************************************************************************/
-
-
-
-
-
-
-;------------------------------------------------------------------------------
-; Driver header stuff
-
-.struct JOY_HDR
-        ID      .byte   3       ; $6A, $6F, $79 ("joy")
-        VERSION .byte   1       ; Interface version
-        LIBREF  .addr           ; Library reference
-        MASKS   .byte   8       ; Joystick state mask array
-        JUMPTAB .struct
-            INSTALL     .addr   ; INSTALL routine
-            UNINSTALL   .addr   ; UNINSTALL routine
-            COUNT       .addr   ; COUNT routine
-            READ        .addr   ; READ routine
-            IRQ         .addr   ; IRQ routine
-        .endstruct
-.endstruct
-
-;------------------------------------------------------------------------------
-; The JOY API version, stored in JOY_HDR::VERSION
-
-JOY_API_VERSION         = $02
-
-;------------------------------------------------------------------------------
-; Variables
-
-        .global _joy_drv                        ; Pointer to driver
-        .global _joy_masks
-
-;------------------------------------------------------------------------------
-; Driver entry points
-
-        .global joy_install
-        .global joy_uninstall
-        .global joy_count
-        .global joy_read
-
-;------------------------------------------------------------------------------
-; C callable functions
-
-        .global _joy_load_driver
-        .global _joy_unload
-        .global _joy_install
-        .global _joy_uninstall
-        .global _joy_count
-        .global _joy_read
-
-        .global _joy_clear_ptr

data/lib/burn/tools/mac/cc65/asminc/longbranch.mac

@@ -1,88 +0,0 @@
-.macro  jeq     Target
-        .if     .match(Target, 0)
-        bne     *+5
-        jmp     Target
-        .elseif .def(Target) .and .const((*-2)-(Target)) .and ((*+2)-(Target) <= 127)
-                beq     Target
-        .else
-                bne     *+5
-                jmp     Target
-        .endif
-.endmacro
-.macro  jne     Target
-        .if     .match(Target, 0)
-                beq     *+5
-                jmp     Target
-        .elseif .def(Target) .and .const((*-2)-(Target)) .and ((*+2)-(Target) <= 127)
-                bne     Target
-        .else
-                beq     *+5
-                jmp     Target
-        .endif
-.endmacro
-.macro  jmi     Target
-        .if     .match(Target, 0)
-                bpl     *+5
-                jmp     Target
-        .elseif .def(Target) .and .const((*-2)-(Target)) .and ((*+2)-(Target) <= 127)
-                bmi     Target
-        .else
-                bpl     *+5
-                jmp     Target
-        .endif
-.endmacro
-.macro  jpl     Target
-        .if     .match(Target, 0)
-                bmi     *+5
-                jmp     Target
-        .elseif .def(Target) .and .const((*-2)-(Target)) .and ((*+2)-(Target) <= 127)
-                bpl     Target
-        .else
-                bmi     *+5
-                jmp     Target
-        .endif
-.endmacro
-.macro  jcs     Target
-        .if     .match(Target, 0)
-                bcc     *+5
-                jmp     Target
-        .elseif .def(Target) .and .const((*-2)-(Target)) .and ((*+2)-(Target) <= 127)
-                bcs     Target
-        .else
-                bcc     *+5
-                jmp     Target
-        .endif
-.endmacro
-.macro  jcc     Target
-        .if     .match(Target, 0)
-                bcs     *+5
-                jmp     Target
-        .elseif .def(Target) .and .const((*-2)-(Target)) .and ((*+2)-(Target) <= 127)
-                bcc     Target
-        .else
-                bcs     *+5
-                jmp     Target
-        .endif
-.endmacro
-.macro  jvs     Target
-        .if     .match(Target, 0)
-                bvc     *+5
-                jmp     Target
-        .elseif .def(Target) .and .const((*-2)-(Target)) .and ((*+2)-(Target) <= 127)
-                bvs     Target
-        .else
-                bvc     *+5
-                jmp     Target
-        .endif
-.endmacro
-.macro  jvc     Target
-        .if     .match(Target, 0)
-                bvs     *+5
-                jmp     Target
-        .elseif .def(Target) .and .const((*-2)-(Target)) .and ((*+2)-(Target) <= 127)
-                bvc     Target
-        .else
-                bvs     *+5
-                jmp     Target
-        .endif
-.endmacro

data/lib/burn/tools/mac/cc65/asminc/lynx.inc

@@ -1,279 +0,0 @@
-; Lynx system hardware includes
-; Shawn Jefferson
-; June 18th, 2004
-;
-; Reference:
-;  Bastian Schick's Lynx Documentation
-;  http://www.geocities.com/SiliconValley/Byte/4242/lynx/
-;
-
-; ***
-; *** Suzy Addresses
-; ***
-
-; Sprite Control Block
-
-TMPADRL     = $FC00
-TMPADRH     = $FC01
-TILTACUML   = $FC02
-TILTACUMH   = $FC03
-HOFFL       = $FC04
-HOFFH       = $FC05
-VOFFL       = $FC06
-VOFFH       = $FC07
-VIDBASL     = $FC08
-VIDBASH     = $FC09
-COLLBASL    = $FC0A
-COLLBASH    = $FC0B
-VIDADRL     = $FC0C
-VIDADRH     = $FC0D
-COLLADRL    = $FC0E
-COLLADRH    = $FC0F
-SCBNEXTL    = $FC10
-SCBNEXTH    = $FC11
-SPRDLINEL   = $FC12
-SPRDLINEH   = $FC13
-HPOSSTRTL   = $FC14
-HPOSSTRTH   = $FC15
-VPOSSTRTL   = $FC16
-VPOSSTRTH   = $FC17
-SPRHSIZL    = $FC18
-SPRHSIZH    = $FC19
-SPRVSIZL    = $FC1A
-SPRVSIZH    = $FC1B
-STRETCHL    = $FC1C
-STRETCHH    = $FC1D
-TILTL       = $FC1E
-TILTH       = $FC1F
-SPRDOFFL    = $FC20
-SPRDOFFH    = $FC21
-SPRVPOSL    = $FC22
-SPRVPOSH    = $FC23
-COLLOFFL    = $FC24
-COLLOFFH    = $FC25
-VSIZACUML   = $FC26
-VSIZACUMH   = $FC27
-HSIZOFFL    = $FC28
-HSIZOFFH    = $FC29
-VSIZOFFL    = $FC2A
-VSIZOFFH    = $FC2B
-SCBADRL     = $FC2C
-SCBADRH     = $FC2D
-PROCADRL    = $FC2E
-PROCADRH    = $FC2F
-
-; Suzy Math
-
-MATHD       = $FC52
-MATHC       = $FC53
-MATHB       = $FC54
-MATHA       = $FC55
-MATHP       = $FC56
-MATHN       = $FC57
-MATHH       = $FC60
-MATHG       = $FC61
-MATHF       = $FC62
-MATHE       = $FC63
-MATHM       = $FC6C
-MATHL       = $FC6D
-MATHK       = $FC6E
-MATHJ       = $FC6F
-
-; Suzy Misc
-
-SPRCTL0     = $FC80
-SPRCTL1     = $FC81
-SPRCOLL     = $FC82
-SPRINIT     = $FC83
-SUZYHREV    = $FC88
-SUZYSREV    = $FC89
-SUZYBUSEN   = $FC90
-SPRGO       = $FC91
-SPRSYS      = $FC92
-JOYSTICK    = $FCB0
-SWITCHES    = $FCB1
-RCART0      = $FCB2
-RCART1      = $FCB3
-LEDS        = $FCC0
-PARSTATUS   = $FCC2
-PARDATA     = $FCC3
-HOWIE       = $FCC4
-
-
-; ***
-; *** Mikey Addresses
-; ***
-
-; Mikey Timers
-
-TIMER0      = $FD00
-TIMER1      = $FD04
-TIMER2      = $FD08
-TIMER3      = $FD0C
-TIMER4      = $FD10
-TIMER5      = $FD14
-TIMER6      = $FD18
-TIMER7      = $FD1C
-HTIMER      = $FD00             ; horizontal line timer (timer 0)
-VTIMER      = $FD08             ; vertical blank timer (timer 2)
-STIMER      = $FD1C             ; sound timer (timer 7)
-
-HTIMBKUP    = $FD00             ; horizontal line timer (timer 0)
-HTIMCTLA    = $FD01
-HTIMCNT     = $FD02
-HTIMCTLB    = $FD03
-VTIMBKUP    = $FD08             ; vertical blank timer (timer 2)
-VTIMCTLA    = $FD09
-VTIMCNT     = $FD0A
-VTIMCTLB    = $FD0B
-BAUDBKUP    = $FD10             ; serial timer (timer 4)
-STIMBKUP    = $FD1C             ; sound timer (timer 7)
-STIMCTLA    = $FD1D
-STIMCNT     = $FD1E
-STIMCTLB    = $FD1F
-
-TIM0BKUP    = $FD00
-TIM0CTLA    = $FD01
-TIM0CNT     = $FD02
-TIM0CTLB    = $FD03 
-TIM1BKUP    = $FD04
-TIM1CTLA    = $FD05
-TIM1CNT     = $FD06
-TIM1CTLB    = $FD07 
-TIM2BKUP    = $FD08
-TIM2CTLA    = $FD09
-TIM2CNT     = $FD0A
-TIM2CTLB    = $FD0B 
-TIM3BKUP    = $FD0C
-TIM3CTLA    = $FD0D
-TIM3CNT     = $FD0E
-TIM3CTLB    = $FD0F 
-TIM4BKUP    = $FD10
-TIM4CTLA    = $FD11
-TIM4CNT     = $FD12
-TIM4CTLB    = $FD13 
-TIM5BKUP    = $FD14
-TIM5CTLA    = $FD15
-TIM5CNT     = $FD16
-TIM5CTLB    = $FD17 
-TIM6BKUP    = $FD18
-TIM6CTLA    = $FD19
-TIM6CNT     = $FD1A
-TIM6CTLB    = $FD1B 
-TIM7BKUP    = $FD1C
-TIM7CTLA    = $FD1D
-TIM7CNT     = $FD1E
-TIM7CTLB    = $FD1F 
-
-; Mikey Audio
-
-AUDIO0      = $FD20             ; audio channel 0
-AUDIO1      = $FD28             ; audio channel 1
-AUDIO2      = $FD30             ; audio channel 2
-AUDIO3      = $FD38             ; audio channel 3
-
-AUD0VOL     = $FD20
-AUD0FEED    = $FD21
-AUD0OUT     = $FD22
-AUD0SHIFT   = $FD23
-AUD0BKUP    = $FD24
-AUD0CTLA    = $FD25
-AUD0CNT     = $FD26
-AUD0CTLB    = $FD27
-AUD1VOL     = $FD28
-AUD1FEED    = $FD29
-AUD1OUT     = $FD2A
-AUD1SHIFT   = $FD2B
-AUD1BKUP    = $FD2C
-AUD1CTLA    = $FD2D
-AUD1CNT     = $FD2E
-AUD1CTLB    = $FD2F
-AUD2VOL     = $FD30
-AUD2FEED    = $FD31
-AUD2OUT     = $FD32
-AUD2SHIFT   = $FD33
-AUD2BKUP    = $FD34
-AUD2CTLA    = $FD35
-AUD2CNT     = $FD36
-AUD2CTLB    = $FD37
-AUD3VOL     = $FD38
-AUD3FEED    = $FD39
-AUD3OUT     = $FD3A
-AUD3SHIFT   = $FD3B
-AUD3BKUP    = $FD3C
-AUD3CTLA    = $FD3D
-AUD3CNT     = $FD3E
-AUD3CTLB    = $FD3F
-MSTEREO     = $FD50
-
-; Mikey Misc
-
-; Interrupt bits in INTRST and INTSET
-TIMER0_INTERRUPT = $01
-TIMER1_INTERRUPT = $02
-TIMER2_INTERRUPT = $04
-TIMER3_INTERRUPT = $08
-TIMER4_INTERRUPT = $10
-TIMER5_INTERRUPT = $20
-TIMER6_INTERRUPT = $40
-TIMER7_INTERRUPT = $80
-
-HBL_INTERRUPT = TIMER0_INTERRUPT
-VBL_INTERRUPT = TIMER2_INTERRUPT
-SERIAL_INTERRUPT = TIMER4_INTERRUPT
-SND_INTERRUPT = TIMER7_INTERRUPT
-
-INTRST      = $FD80
-INTSET      = $FD81
-MAGRDY0     = $FD84
-MAGRDY1     = $FD85
-AUDIN       = $FD86
-SYSCTL1     = $FD87
-MIKEYHREV   = $FD88
-MIKEYSREV   = $FD89
-IODIR       = $FD8A
-IODAT       = $FD8B
-TxIntEnable = %10000000
-RxIntEnable = %01000000
-TxParEnable = %00010000
-ResetErr    = %00001000
-TxOpenColl  = %00000100
-TxBreak     = %00000010
-ParEven     = %00000001
-TxReady     = %10000000
-RxReady     = %01000000
-TxEmpty     = %00100000
-RxParityErr = %00010000
-RxOverrun   = %00001000
-RxFrameErr  = %00000100
-RxBreak     = %00000010
-ParityBit   = %00000001
-SERCTL      = $FD8C
-SERDAT      = $FD8D
-SDONEACK    = $FD90
-CPUSLEEP    = $FD91
-DISPCTL     = $FD92
-PBKUP       = $FD93
-DISPADRL    = $FD94
-DISPADRH    = $FD95
-MTEST0      = $FD9C
-MTEST1      = $FD9D
-MTEST2      = $FD9E
-PALETTE     = $FDA0                 ; hardware rgb palette
-GCOLMAP     = $FDA0                 ; hardware rgb palette (green)
-RBCOLMAP    = $FDB0                 ; hardware rgb palette (red-blue)
-
-
-; ***
-; *** Misc Hardware + 6502 vectors
-; ***
-
-MAPCTL      = $FFF9
-VECTORS     = $FFFB
-INTVECTL    = $FFFE
-INTVECTH    = $FFFF
-RSTVECTL    = $FFFC
-RSTVECTH    = $FFFD
-NMIVECTL    = $FFFA
-NMIVECTH    = $FFFB
-

data/lib/burn/tools/mac/cc65/asminc/modload.inc

@@ -1,78 +0,0 @@
-;*****************************************************************************/
-;*                                                                           */
-;*                                  modload.inc                              */
-;*                                                                           */
-;*                     o65 module loader interface for cc65                  */
-;*                                                                           */
-;*                                                                           */
-;*                                                                           */
-;* (C) 2002      Ullrich von Bassewitz                                       */
-;*               Wacholderweg 14                                             */
-;*               D-70597 Stuttgart                                           */
-;* EMail:        uz@musoftware.de                                            */
-;*                                                                           */
-;*                                                                           */
-;* This software is provided 'as-is', without any expressed or implied       */
-;* warranty.  In no event will the authors be held liable for any damages    */
-;* arising from the use of this software.                                    */
-;*                                                                           */
-;* Permission is granted to anyone to use this software for any purpose,     */
-;* including commercial applications, and to alter it and redistribute it    */
-;* freely, subject to the following restrictions:                            */
-;*                                                                           */
-;* 1. The origin of this software must not be misrepresented; you must not   */
-;*    claim that you wrote the original software. If you use this software   */
-;*    in a product, an acknowledgment in the product documentation would be  */
-;*    appreciated but is not required.                                       */
-;* 2. Altered source versions must be plainly marked as such, and must not   */
-;*    be misrepresented as being the original software.                      */
-;* 3. This notice may not be removed or altered from any source              */
-;*    distribution.                                                          */
-;*                                                                           */
-;*****************************************************************************/
-
-
-
-; Exports structures and functions to load relocatable o65 modules at
-; runtime.
-
-
-
-; Offsets for the mod_ctrl struct. This struct is passed to the module loader.
-; It contains stuff, the loader needs to work, and another area where the
-; loader will place informational data if it was successful. You will have to
-; check the return code of mod_load before accessing any of these additional
-; struct members.
-.struct MOD_CTRL
-        READ            .addr
-        CALLERDATA      .word
-        MODULE          .addr           ; Pointer to module data
-        MODULE_SIZE     .word           ; Total size of loaded module
-        MODULE_ID       .word
-.endstruct
-
-; unsigned char mod_load (struct mod_ctrl* ctrl);
-; /* Load a module into memory and relocate it. The function will return an
-;  * error code (see below). If MLOAD_OK is returned, the outgoing fields in
-;  * the passed mod_ctrl struct contain information about the module just
-;  * loaded.
-;  */
-.global         _mod_load
-
-; void mod_free (void* module);
-; /* Free a loaded module. Note: The given pointer is the pointer to the
-;  * module memory, not a pointer to a control structure.
-;  */
-.global         _mod_free
-
-; Errors
-.enum
-        MLOAD_OK        ; Module load successful
-        MLOAD_ERR_READ  ; Read error
-        MLOAD_ERR_HDR   ; Header error
-        MLOAD_ERR_OS    ; Wrong OS
-        MLOAD_ERR_FMT   ; Data format error
-        MLOAD_ERR_MEM   ; Not enough memory
-.endenum
-
-