burn 0.1.0 → 0.1.1

data/lib/burn/tools/win/cc65/asminc/atari.inc

@@ -1,1101 +0,0 @@
-;-------------------------------------------------------------------------
-; Atari System Equates
-; by Freddy Offenga & Christian Groessler
-;
-; References:
-; - Atari 400/800 OS rev.B source code, Atari 1979
-; - Atari OS manual - XL addendum
-; - Atari XL/XE rev.2 source code, Atari 1984
-; - Mapping the Atari - revised edition, Ian Chadwick 1985
-;
-; ##old##	old OS rev.B label - moved or deleted
-; ##1200xl##	new label introduced in 1200XL OS (rev.10/11)
-; ##rev2##	new label introduced in XL/XE OS rev.2
-;-------------------------------------------------------------------------
-
-;-------------------------------------------------------------------------
-; Configuration Equates
-;-------------------------------------------------------------------------
-
-MAXDEV	= 33		;offset to last possible entry of HATABS
-IOCBSZ	= 16		;length of IOCB
-
-SEIOCB	= 0*IOCBSZ	;##rev2## screen editor IOCB index
-MAXIOC	= 8*IOCBSZ	;first invalid IOCB index
-
-DSCTSZ	= 128		;##rev2## disk sector size
-
-LEDGE	= 2		;left edge
-REDGE	= 39		;right edge
-
-INIML	= $0700		;##rev2## initial MEMLO
-
-ICSORG	= $CC00		;##rev2## international character set origin
-DCSORG	= $E000		;##rev2## domestic character set origin
-
-; IOCB Command Code Equates
-
-OPEN	= $03		;open
-GETREC	= $05		;get record
-GETCHR	= $07		;get character(s)
-PUTREC	= $09		;put record
-PUTCHR	= $0B		;put character(s)
-CLOSE	= $0C		;close
-STATIS	= $0D		;status
-SPECIL	= $0E		;special
-
-; Special Entry Command Equates
-
-; Screen Commands
-
-DRAWLN	= $11		;draw line
-FILLIN	= $12		;draw line with right fill
-
-; ICAX1 Auxiliary Byte 1 Equates
-
-APPEND	= $01		;open write append (D:)
-DIRECT	= $02		;open for directory access (D:)
-OPNIN	= $04		;open for input (all devices)
-OPNOT	= $08		;open for output (all devices)
-MXDMOD	= $10		;open for mixed mode (E:, S:)
-INSCLR	= $20		;open for input without clearing screen
-
-; Device Code Equates
-
-CASSET	= 'C'		;cassette
-DISK	= 'D'		;disk
-SCREDT	= 'E'		;screen editor
-KBD	= 'K'		;keyboard
-PRINTR	= 'P'		;printer
-DISPLY	= 'S'		;screen display
-
-; SIO Command Code Equates
-
-SIO_FORMAT   = $21	;format disk (default density)
-SIO_FORMATS  = $22	;1050: format medium density
-SIO_CONFIG   = $44	;configure drive
-SIO_CONFIGSF = $4B	;slow/fast configure drive??
-SIO_WRITE    = $50	;write sector
-SIO_READ     = $52	;read sector
-SIO_STAT     = $53	;get status information
-SIO_VERIFY   = $56	;verify sector 
-SIO_WRITEV   = $57	;write sector with verify
-
-; Character and Key Code Equates
-
-CLS	= $7D		;##rev2## clear screen
-EOL	= $9B		;end of line (RETURN)
-
-HELP	= $11		;##1200xl## key code for HELP
-CNTLF1	= $83		;##1200xl## key code for CTRL-F1
-CNTLF2	= $84		;##1200xl## key code for CTRL-F2
-CNTLF3	= $93		;##1200xl## key code for CTRL-F3
-CNTLF4	= $94		;##1200xl## key code for CTRL-F4
-CNTL1	= $9F		;##1200xl## key code for CTRL-1
-
-; Status Code Equates
-
-SUCCES	= 1		;($01) succesful operation
-
-BRKABT	= 128		;($80) BREAK key abort
-PRVOPN	= 129		;($81) IOCB already open error
-NONDEV	= 130		;($82) nonexistent device error
-WRONLY	= 131		;($83) IOCB opened for write only error
-NVALID	= 132		;($84) invalid command error
-NOTOPN	= 133		;($85) device/file not open error
-BADIOC	= 134		;($86) invalid IOCB index error
-RDONLY	= 135		;($87) IOCB opened for read only error
-EOFERR	= 136		;($88) end of file error
-TRNRCD	= 137		;($89) truncated record error
-TIMOUT	= 138		;($8A) peripheral device timeout error
-DNACK	= 139		;($8B) device does not acknowledge command
-FRMERR	= 140		;($8C) serial bus framing error
-CRSROR	= 141		;($8D) cursor overrange error
-OVRRUN	= 142		;($8E) serial bus data overrun error
-CHKERR	= 143		;($8F) serial bus checksum error
-DERROR	= 144		;($90) device done (operation incomplete)
-BADMOD	= 145		;($91) bad screen mode number error
-FNCNOT	= 146		;($92) function not implemented in handler
-SCRMEM	= 147		;($93) insufficient memory for screen mode
-
-DSKFMT	= 148		;($94) SpartaDOS: unrecognized disk format
-INCVER	= 149		;($95) SpartaDOS: disk was made with incompat. version
-DIRNFD	= 150		;($96) SpartaDOS: directory not found
-FEXIST	= 151		;($97) SpartaDOS: file exists
-NOTBIN	= 152		;($98) SpartaDOS: file not binary
-LSYMND	= 154		;($9A) SDX: loader symbol not defined
-BADPRM	= 156		;($9C) SDX: bad parameter
-OUTOFM	= 158		;($9E) SDX: out of memory
-INVDEV	= 160		;($A0) invalid device number
-TMOF	= 161		;($A1) too many open files
-DSKFLL	= 162		;($A2) disk full
-FATLIO	= 163		;($A3) fatal I/O error
-FNMSMT	= 164		;($A4) internal file number mismatch
-INVFNM	= 165		;($A5) invalid file name
-PDLERR	= 166		;($A6) point data length error
-EPERM	= 167		;($A7) permission denied
-DINVCM	= 168		;($A8) command invalid for disk
-DIRFLL	= 169		;($A9) directory full
-FNTFND	= 170		;($AA) file not found
-PNTINV	= 171		;($AB) point invalid
-BADDSK	= 173		;($AD) bad disk
-INCFMT	= 176		;($B0) DOS 3: incompatible file system
-
-; DCB Device Bus Equates
-
-DISKID	= $31		;##rev2## disk bus ID
-PDEVN	= $40		;##rev2## printer bus ID
-CASET	= $60		;##rev2## cassette bus ID
-
-; Bus Command Equates
-
-FOMAT	= '!'		;##rev2## format command
-PUTSEC	= 'P'		;##rev2## put sector command
-READ	= 'R'		;##rev2## read command
-STATC	= 'S'		;##rev2## status command
-WRITE	= 'W'		;##rev2## write command
-
-; Command Auxiliary Byte Equates
-
-DOUBLE	= 'D'		;##rev2## print 20 characters double width
-NORMAL	= 'N'		;##rev2## print 40 characters normally
-PLOT	= 'P'		;##rev2## plot
-SIDWAY	= 'S'		;##rev2## print 16 characters sideways
-
-; Bus Response Equates
-
-ACK	= 'A'		;##rev2## device acknowledged
-COMPLT	= 'C'		;##rev2## device succesfully completed operation
-ERROR	= 'E'		;##rev2## device incurred error
-NACK	= 'N'		;##rev2## device did not understand
-
-; Floating Point Miscellaneous Equates
-
-FPREC	= 6		;precision
-
-FMPREC	= FPREC-1	;##rev2## length of mantissa
-
-; Cassette Record Type Equates
-
-HDR	= $FB		;##rev2## header
-DTA	= $FC		;##rev2## data record
-DT1	= $FA		;##rev2## last data record
-EOT	= $FE		;##rev2## end of tape (file)
-
-TONE1	= 2		;##rev2## record
-TONE2	= 1		;##rev2## playback
-
-; Cassette Timing Equates
-
-WLEADN	= 1152		;##rev2## NTSC 19.2 second WRITE file leader
-RLEADN	= 576		;##rev2## NTSC 9.6 second READ file leader
-WIRGLN	= 180		;##rev2## NTSC 3.0 second WRITE IRG
-RIRGLN	= 120		;##rev2## NTSC 2.0 second READ IRG
-WSIRGN	= 15		;##rev2## NTSC 0.25 second WRITE short IRG
-RSIRGN	= 10		;##rev2## NTSC 0.16 second READ short IRG
-BEEPNN	= 30		;##rev2## NTSC 0.5 second beep duration
-BEEPFN	= 10		;##rev2## NTSC 0.16 seconrd beep duration
-
-WLEADP	= 960		;##rev2## PAL 19.2 second WRITE file leader
-RLEADP	= 480		;##rev2## PAL 9.6 second READ file leader
-WIRGLP	= 150		;##rev2## PAL 3.0 second WRITE IRG
-RIRGLP	= 100		;##rev2## PAL 2.0 second READ IRG
-WSIRGP	= 13		;##rev2## PAL 0.25 second WRITE short IRG
-RSIRGP	= 8		;##rev2## PAL 0.16 second READ short IRG
-BEEPNP	= 25		;##rev2## PAL 0.5 second beep duration
-BEEPFP	= 8		;##rev2## PAL 0.16 seconrd beep duration
-
-WIRGHI	= 0		;##rev2## high WRITE IRG
-RIRGHI	= 0		;##rev2## high READ IRG
-
-; Power-up Validation Byte Value Equates
-
-PUPVL1	= $5C		;##rev2## power-up validation value 1
-PUPVL2	= $93		;##rev2## power-up validation value 2
-PUPVL3	= $25		;##rev2## power-up validation value 3
-
-; Relocating Loader Miscellaneous Equates
-
-DATAER	= 156		;##rev2## end of record appears before END
-MEMERR	= 157		;##rev2## memory insufficient for load error
-
-; Miscellaneous Equates
-
-IOCFRE	= $FF		;IOCB free indication
-
-B19200	= $0028		;##rev2## 19200 baud POKEY counter value
-B00600	= $05CC		;##rev2## 600 baud POKEY counter value
-
-HITONE	= $05		;##rev2## FSK high freq. POKEY counter value
-LOTONE	= $07		;##rev2## FSK low freq. POKEY counter value
-
-NCOMLO	= $34		;##rev2## PIA lower NOT COMMAND line command
-NCOMHI	= $3C		;##rev2## PIA raise NOT COMMAND line command
-
-MOTRGO	= $34		;##rev2## PIA cassette motor ON command
-MOTRST	= $3C		;##rev2## PIA cassette motor OFF command
-
-NODAT	= $00		;##rev2## SIO immediate operation
-GETDAT	= $40		;##rev2## SIO read data frame
-PUTDAT	= $80		;##rev2## SIO write data frame
-
-CRETRI	= 13		;##rev2## number of command frame retries
-DRETRI	= 1		;##rev2## number of device retries
-CTIM	= 2		;##rev2## command frame ACK timeout
-
-NBUFSZ	= 40		;##rev2## print normal buffer size
-DBUFSZ	= 20		;##rev2## print double buffer size
-SBUFSZ	= 29		;##rev2## print sideways buffer size
-
-;-------------------------------------------------------------------------
-; Page Zero Address Equates
-;-------------------------------------------------------------------------
-
-LINZBS	= $00		;LINBUG RAM (WILL BE REPLACED BY MONITOR RAM)
-LNFLG	= $00		;##1200xl## 1-byte LNBUG flag (0 = not LNBUG)
-NGFLAG	= $01		;##1200xl## 1-byte memory status (0 = failure)
-
-; Not Cleared
-
-CASINI	= $02		;CASSETTE INIT LOCATION
-RAMLO	= $04		;RAM POINTER FOR MEMORY TEST
-TRAMSZ	= $06		;TEMPORARY REGISTER FOR RAM SIZE
-;TSTDAT	= $07		;##old## RAM TEST DATA REGISTER
-CMCMD	= $07		;##rev2## 1-byte command communications
-
-; Cleared upon Coldstart only
-
-WARMST	= $08		;WARM START FLAG
-BOOTQ	= $09		;SUCCESSFUL BOOT FLAG
-DOSVEC	= $0A		;DISK SOFTWARE START VECTOR
-DOSINI	= $0C		;DISK SOFTWARE INIT ADDRESS
-APPMHI	= $0E		;APPLICATIONS MEMORY HI LIMIT
-
-; Cleared upon Coldstart or Warmstart
-
-INTZBS	= $10		;INTERRUPT HANDLER
-
-POKMSK	= $10		;SYSTEM MASK FOR POKEY IRG ENABLE
-BRKKEY	= $11		;BREAK KEY FLAG
-RTCLOK	= $12		;REAL TIME CLOCK (IN 16 MSEC UNITS>
-BUFADR	= $15		;INDIRECT BUFFER ADDRESS REGISTER
-ICCOMT	= $17		;COMMAND FOR VECTOR
-DSKFMS	= $18		;DISK FILE MANAGER POINTER
-DSKUTL	= $1A		;DISK UTILITIES POINTER
-ABUFPT	= $1C		;##1200xl## 4-byte ACMI buffer pointer area
-
-;PTIMOT	= $1C		;##old## PRINTER TIME OUT REGISTER
-;PBPNT	= $1D		;##old## PRINT BUFFER POINTER
-;PBUFSZ	= $1E		;##old## PRINT BUFFER SIZE
-;PTEMP	= $1F		;##old## TEMPORARY REGISTER
-
-ZIOCB	= $20		;ZERO PAGE I/O CONTROL BLOCK
-IOCBAS	= $20		;16-byte page zero IOCB
-ICHIDZ	= $20		;HANDLER INDEX NUMBER (FF = IOCB FREE)
-ICDNOZ	= $21		;DEVICE NUMBER (DRIVE NUMBER)
-ICCOMZ	= $22		;COMMAND CODE
-ICSTAZ	= $23		;STATUS OF LAST IOCB ACTION
-ICBALZ	= $24		;BUFFER ADDRESS LOW BYTE
-ICBAHZ	= $25		;1-byte high buffer address
-ICPTLZ	= $26		;PUT BYTE ROUTINE ADDRESS -1
-ICPTHZ	= $27		;1-byte high PUT-BYTE routine address
-ICBLLZ	= $28		;BUFFER LENGTH LOW BYTE
-ICBLHZ	= $29		;1-byte high buffer length
-ICAX1Z	= $2A		;AUXILIARY INFORMATION FIRST BYTE
-ICAX2Z	= $2B		;1-byte second auxiliary information
-ICSPRZ	= $2C		;4-byte spares
-
-ENTVEC	= $2C		;##rev2## 2-byte (not used)
-ICIDNO	= $2E		;IOCB NUMBER X 16
-CIOCHR	= $2F		;CHARACTER BYTE FOR CURRENT OPERATION
-
-STATUS	= $30		;INTERNAL STATUS STORAGE
-CHKSUM	= $31		;CHECKSUM (SINGLE BYTE SUM WITH CARRY)
-BUFRLO	= $32		;POINTER TO DATA BUFFER (LO BYTE)
-BUFRHI	= $33		;POINTER TO DATA BUFFER (HI BYTE)
-BFENLO	= $34		;NEXT BYTE PAST END OF THE DATA BUFFER LO
-BFENHI	= $35		;NEXT BYTE PAST END OF THE DATA BUFFER HI
-;CRETRY	= $36		;##old## NUMBER OF COMMAND FRAME RETRIES
-;DRETRY	= $37		;##old## NUMBER OF DEVICE RETRIES
-LTEMP	= $36		;##1200xl## 2-byte loader temporary
-BUFRFL	= $38		;DATA BUFFER FULL FLAG
-RECVDN	= $39		;RECEIVE DONE FLAG
-XMTDON	= $3A		;TRANSMISSION DONE FLAG
-CHKSNT	= $3B		;CHECKSUM SENT FLAG
-NOCKSM	= $3C		;NO CHECKSUM FOLLOWS DATA FLAG
-BPTR	= $3D		;1-byte cassette buffer pointer
-FTYPE	= $3E		;1-byte cassette IRG type
-FEOF	= $3F		;1-byte cassette EOF flag (0 = quiet)
-FREQ	= $40		;1-byte cassette beep counter
-SOUNDR	= $41		;NOISY I/0 FLAG. (ZERO IS QUIET)
-
-CRITIC	= $42		;DEFINES CRITICAL SECTION (CRITICAL IF NON-Z)
-
-FMSZPG	= $43		;DISK FILE MANAGER SYSTEM ZERO PAGE
-
-;CKEY	= $4A		;##old## FLAG SET WHEN GAME START PRESSED
-ZCHAIN	= $4A		;##1200xl## 2-byte handler linkage chain pointer
-;CASSBT	= $4B		;##old## CASSETTE BOOT FLAG
-DSTAT	= $4C		;DISPLAY STATUS
-ATRACT	= $4D		;ATRACT FLAG
-DRKMSK	= $4E		;DARK ATRACT MASK
-COLRSH	= $4F		;ATRACT COLOR SHIFTER (EOR'ED WITH PLAYFIELD
-
-
-TMPCHR	= $50		;1-byte temporary character
-HOLD1	= $51		;1-byte temporary
-LMARGN	= $52		;left margin (normally 2, cc65 C startup code sets it to 0)
-RMARGN	= $53		;right margin (normally 39 if no XEP80 is used)
-ROWCRS	= $54		;1-byte cursor row
-COLCRS	= $55		;2-byte cursor column
-DINDEX	= $57		;1-byte display mode
-SAVMSC	= $58		;2-byte saved memory scan counter
-OLDROW	= $5A		;1-byte prior row
-OLDCOL	= $5B		;2-byte prior column
-OLDCHR	= $5D		;DATA UNDER CURSOR
-OLDADR	= $5E		;2-byte saved cursor memory address
-FKDEF	= $60		;##1200xl## 2-byte function key definition table
-;NEWROW	= $60		;##old## POINT DRAW GOES TO
-;NEWCOL	= $61		;##old##
-PALNTS	= $62		;##1200xl## 1-byte PAL/NTSC indicator (0 = NTSC)
-LOGCOL	= $63		;POINTS AT COLUMN IN LOGICAL LINE
-ADRESS	= $64		;2-byte temporary address
-
-MLTTMP	= $66		;1-byte temporary
-OPNTMP	= $66		;FIRST BYTE IS USED IN OPEN AS TEMP
-TOADR	= $66		;##rev2## 2-byte destination address
-
-SAVADR	= $68		;2-byte saved address
-FRMADR	= $68		;##rev2## 2-byte source address
-
-RAMTOP	= $6A		;RAM SIZE DEFINED BY POWER ON LOGIC
-BUFCNT	= $6B		;BUFFER COUNT
-BUFSTR	= $6C		;EDITOR GETCH POINTER
-BITMSK	= $6E		;BIT MASK
-SHFAMT	= $6F		;1-byte shift amount for pixel justifucation
-ROWAC	= $70		;2-byte draw working row
-COLAC	= $72		;2-byte draw working column
-ENDPT	= $74		;2-byte end point
-DELTAR	= $76		;1-byte row difference
-DELTAC	= $77		;2-byte column difference
-KEYDEF	= $79		;##1200xl## 2-byte key definition table address
-;ROWINC	= $79		;##old##
-;COLINC	= $7A		;##old##
-SWPFLG	= $7B		;NON-0 1F TXT AND REGULAR RAM IS SWAPPED
-HOLDCH	= $7C		;CH IS MOVED HERE IN KGETCH BEFORE CNTL & SH
-INSDAT	= $7D		;1-byte temporary
-COUNTR	= $7E		;2-byte draw iteration count
-
-; Floating Point Package Page Zero Address Equates
-
-FR0	= $D4		;6-byte register 0
-FR0M	= $D5		;##rev2## 5-byte register 0 mantissa
-QTEMP	= $D9		;##rev2## 1-byte temporary
-
-FRE	= $DA		;6-byte (internal) register E
-
-FR1	= $E0		;FP REG1
-FR1M	= $E1		;##rev2## 5-byte register 1 mantissa
-
-FR2	= $E6		;6-byte (internal) register 2
-
-FRX	= $EC		;1-byte temporary
-
-EEXP	= $ED		;VALUE OF E
-
-FRSIGN	= $EE		;##rev2## 1-byte floating point sign
-NSIGN	= $EE		;SIGN OF #
-
-PLYCNT	= $EF		;##rev2## 1-byte polynomial degree
-ESIGN	= $EF		;SIGN OF EXPONENT
-
-SGNFLG	= $F0		;##rev2## 1-byte sign flag
-FCHRFLG	= $F0		;1ST CHAR FLAG
-
-XFMFLG	= $F1		;##rev2## 1-byte transform flag
-DIGRT	= $F1		;# OF DIGITS RIGHT OF DECIMAL
-
-CIX	= $F2		;CURRENT INPUT INDEX
-INBUFF	= $F3		;POINTS TO USER'S LINE INPUT BUFFER
-
-ZTEMP1	= $F5		;2-byte temporary
-ZTEMP4	= $F7		;2-byte temporary
-ZTEMP3	= $F9		;2-byte temporary
-
-;DEGFLG	= $FB		;##old## same as RADFLG
-;RADFLG	= $FB		;##old## 0=RADIANS, 6=DEGREES
-
-FLPTR	= $FC		;2-byte floating point number pointer
-FPTR2	= $FE		;2-byte floating point number pointer
-
-;-------------------------------------------------------------------------
-; Page Two Address Equates
-;-------------------------------------------------------------------------
-
-INTABS	= $0200		;INTERRUPT RAM
-
-VDSLST	= $0200		;DISPLAY LIST NMI VECTOR
-VPRCED	= $0202		;PROCEED LINE IRQ VECTOR
-VINTER	= $0204		;INTERRUPT LINE IRQ VECTOR
-VBREAK	= $0206		;SOFTWARE BREAK (00) INSTRUCTION IRQ VECTOR
-VKEYBD	= $0208		;POKEY KEYBOARD IRQ VECTOR
-VSERIN	= $020A		;POKEY SERIAL INPUT READY IRQ
-VSEROR	= $020C		;POKEY SERIAL OUTPUT READY IRQ
-VSEROC	= $020E		;POKEY SERIAL OUTPUT COMPLETE IRQ
-VTIMR1	= $0210		;POKEY TIMER 1 IRG
-VTIMR2	= $0212		;POKEY TIMER 2 IRG
-VTIMR4	= $0214		;POKEY TIMER 4 IRG
-VIMIRQ	= $0216		;IMMEDIATE IRG VECTOR
-CDTMV1	= $0218		;COUNT DOWN TIMER 1
-CDTMV2	= $021A		;COUNT DOWN TIMER 2
-CDTMV3	= $021C		;COUNT DOWN TIMER 3
-CDTMV4	= $021E		;COUNT DOWN TIMER 4
-CDTMV5	= $0220		;COUNT DOWN TIMER 5
-VVBLKI	= $0222		;IMMEDIATE VERTICAL BLANK NMI VECTOR
-VVBLKD	= $0224		;DEFERRED VERTICAL BLANK NMI VECTOR
-CDTMA1	= $0226		;COUNT DOWN TIMER 1 JSR ADDRESS
-CDTMA2	= $0228		;COUNT DOWN TIMER 2 JSR ADDRESS
-CDTMF3	= $022A		;COUNT DOWN TIMER 3 FLAG
-SRTIMR	= $022B		;SOFTWARE REPEAT TIMER
-CDTMF4	= $022C		;COUNT DOWN TIMER 4 FLAG
-INTEMP	= $022D		;IAN'S TEMP
-CDTMF5	= $022E		;COUNT DOWN TIMER FLAG 5
-SDMCTL	= $022F		;SAVE DMACTL REGISTER
-SDLSTL	= $0230		;SAVE DISPLAY LIST LOW BYTE
-SDLSTH	= $0231		;SAVE DISPLAY LIST HI BYTE
-SSKCTL	= $0232		;SKCTL REGISTER RAM
-LCOUNT	= $0233		;##1200xl## 1-byte relocating loader record
-LPENH	= $0234		;LIGHT PEN HORIZONTAL VALUE
-LPENV	= $0235		;LIGHT PEN VERTICAL VALUE
-BRKKY	= $0236		;BREAK KEY VECTOR
-;RELADR	= $0238		;##1200xl## 2-byte relocatable loader address
-VPIRQ	= $0238		;##rev2## 2-byte parallel device IRQ vector
-CDEVIC	= $023A		;COMMAND FRAME BUFFER - DEVICE
-CCOMND	= $023B		;COMMAND
-CAUX1	= $023C		;COMMAND AUX BYTE 1
-CAUX2	= $023D		;COMMAND AUX BYTE 2
-
-TEMP	= $023E		;TEMPORARY RAM CELL
-
-ERRFLG	= $023F		;ERROR FLAG - ANY DEVICE ERROR EXCEPT TIME OUT
-
-DFLAGS	= $0240		;DISK FLAGS FROM SECTOR ONE
-DBSECT	= $0241		;NUMBER OF DISK BOOT SECTORS
-BOOTAD	= $0242		;ADDRESS WHERE DISK BOOT LOADER WILL BE PUT
-COLDST	= $0244		;COLDSTART FLAG (1=IN MIDDLE OF COLDSTART>
-RECLEN	= $0245		;##1200xl## 1-byte relocating loader record length
-DSKTIM	= $0246		;DISK TIME OUT REGISTER
-;LINBUF	= $0247		;##old## CHAR LINE BUFFER
-PDVMSK	= $0247		;##rev2## 1-byte parallel device selection mask
-SHPDVS	= $0248		;##rev2## 1-byte PDVS (parallel device select)
-PDIMSK	= $0249		;##rev2## 1-byte parallel device IRQ selection
-RELADR	= $024A		;##rev2## 2-byte relocating loader relative adr.
-PPTMPA	= $024C		;##rev2## 1-byte parallel device handler temporary
-PPTMPX	= $024D		;##rev2## 1-byte parallel device handler temporary
-
-CHSALT	= $026B		;##1200xl## 1-byte character set alternate
-VSFLAG	= $026C		;##1200xl## 1-byte fine vertical scroll count
-KEYDIS	= $026D		;##1200xl## 1-byte keyboard disable
-FINE	= $026E		;##1200xl## 1-byte fine scrolling mode
-GPRIOR	= $026F		;GLOBAL PRIORITY CELL
-
-PADDL0	= $0270		;1-byte potentiometer 0
-PADDL1	= $0271		;1-byte potentiometer 1
-PADDL2	= $0272		;1-byte potentiometer 2
-PADDL3	= $0273		;1-byte potentiometer 3
-PADDL4	= $0274		;1-byte potentiometer 4
-PADDL5	= $0275		;1-byte potentiometer 5
-PADDL6	= $0276		;1-byte potentiometer 6
-PADDL7	= $0277		;1-byte potentiometer 7
-
-STICK0	= $0278		;1-byte joystick 0
-STICK1	= $0279		;1-byte joystick 1
-STICK2	= $027A		;1-byte joystick 2
-STICK3	= $027B		;1-byte joystick 3
-
-PTRIG0	= $027C		;1-byte paddle trigger 0
-PTRIG1	= $027D		;1-byte paddle trigger 1
-PTRIG2	= $027E		;1-byte paddle trigger 2
-PTRIG3	= $027F		;1-byte paddle trigger 3
-PTRIG4	= $0280		;1-byte paddle trigger 4
-PTRIG5	= $0281		;1-byte paddle trigger 5
-PTRIG6	= $0281		;1-byte paddle trigger 6
-PTRIG7	= $0283		;1-byte paddle trigger 7
-
-STRIG0	= $0284		;1-byte joystick trigger 0
-STRIG1	= $0285		;1-byte joystick trigger 1
-STRIG2	= $0286		;1-byte joystick trigger 2
-STRIG3	= $0287		;1-byte joystick trigger 3
-
-;CSTAT	= $0288		;##old## cassette status register
-HIBYTE	= $0288		;##1200xl## 1-byte relocating loader high byte
-WMODE	= $0289		;1-byte cassette WRITE mode
-BLIM	= $028A		;1-byte cassette buffer limit
-IMASK	= $028B		;##rev2## (not used)
-JVECK	= $028C		;2-byte jump vector or temporary
-NEWADR	= $028E		;##1200xl## 2-byte relocating address
-TXTROW	= $0290		;TEXT ROWCRS
-TXTCOL	= $0291		;TEXT COLCRS
-TINDEX	= $0293		;TEXT INDEX
-TXTMSC	= $0294		;FOOLS CONVRT INTO NEW MSC
-TXTOLD	= $0296		;OLDROW & OLDCOL FOR TEXT (AND THEN SOME)
-;TMPX1	= $029C		;##old## 1-byte temporary register
-CRETRY	= $029C		;##1200xl## 1-byte number of command frame retries
-HOLD3	= $029D		;1-byte temporary
-SUBTMP	= $029E		;1-byte temporary
-HOLD2	= $029F		;1-byte (not used)
-DMASK	= $02A0		;1-byte display (pixel location) mask
-TMPLBT	= $02A1		;1-byte (not used)
-ESCFLG	= $02A2		;ESCAPE FLAG
-TABMAP	= $02A3		;15-byte (120 bit) tab stop bit map
-LOGMAP	= $02B2		;LOGICAL LINE START BIT MAP
-INVFLG	= $02B6		;INVERSE VIDEO FLAG (TOGGLED BY ATARI KEY)
-FILFLG	= $02B7		;RIGHT FILL FLAG FOR DRAW
-TMPROW	= $02B8		;1-byte temporary row
-TMPCOL	= $02B9		;2-byte temporary column
-SCRFLG	= $02BB		;SET IF SCROLL OCCURS
-HOLD4	= $02BC		;TEMP CELL USED IN DRAW ONLY
-;HOLD5	= $02BD		;##old## DITTO
-DRETRY	= $02BD		;##1200xl## 1-byte number of device retries
-SHFLOK	= $02BE		;1-byte shift/control lock flags
-BOTSCR	= $02BF		;BOTTOM OF SCREEN   24 NORM 4 SPLIT
-
-PCOLR0	= $02C0		;1-byte player-missile 0 color/luminance
-PCOLR1	= $02C1		;1-byte player-missile 1 color/luminance
-PCOLR2	= $02C2		;1-byte player-missile 2 color/luminance
-PCOLR3	= $02C3		;1-byte player-missile 3 color/luminance
-
-COLOR0	= $02C4		;1-byte playfield 0 color/luminance
-COLOR1	= $02C5		;1-byte playfield 1 color/luminance
-COLOR2	= $02C6		;1-byte playfield 2 color/luminance
-COLOR3	= $02C7		;1-byte playfield 3 color/luminance
-
-COLOR4	= $02C8		;1-byte background color/luminance
-
-PARMBL	= $02C9		;##rev2## 6-byte relocating loader parameter
-RUNADR	= $02C9		;##1200xl## 2-byte run address
-HIUSED	= $02CB		;##1200xl## 2-byte highest non-zero page address
-ZHIUSE	= $02CD		;##1200xl## 2-byte highest zero page address
-
-OLDPAR	= $02CF		;##rev2## 6-byte relocating loader parameter
-GBYTEA	= $02CF		;##1200xl## 2-byte GET-BYTE routine address
-LOADAD	= $02D1		;##1200xl## 2-byte non-zero page load address
-ZLOADA	= $02D3		;##1200xl## 2-byte zero page load address
-
-DSCTLN	= $02D5		;##1200xl## 2-byte disk sector length
-ACMISR	= $02D7		;##1200xl## 2-byte ACMI interrupt service routine
-KRPDEL	= $02D9		;##1200xl## 1-byte auto-repeat delay
-KEYREP	= $02DA		;##1200xl## 1-byte auto-repeat rate
-NOCLIK	= $02DB		;##1200xl## 1-byte key click disable
-HELPFG	= $02DC		;##1200xl## 1-byte HELP key flag (0 = no HELP)
-DMASAV	= $02DD		;##1200xl## 1-byte SDMCTL save/restore
-PBPNT	= $02DE		;##1200xl## 1-byte printer buffer pointer
-PBUFSZ	= $02DF		;##1200xl## 1-byte printer buffer size
-
-GLBABS	= $02E0		;4-byte global variables for non-DOS users
-RUNAD	= $02E0		;##map## 2-byte binary file run address
-INITAD	= $02E2		;##map## 2-byte binary file initialization address
-
-RAMSIZ	= $02E4		;RAM SIZE (HI BYTE ONLY)
-MEMTOP	= $02E5		;TOP OF AVAILABLE USER MEMORY
-MEMLO	= $02E7		;BOTTOM OF AVAILABLE USER MEMORY
-HNDLOD	= $02E9		;##1200xl## 1-byte user load flag
-DVSTAT	= $02EA		;STATUS BUFFER
-CBAUDL	= $02EE		;1-byte low cassette baud rate
-CBAUDH	= $02EF		;1-byte high cassette baud rate
-CRSINH	= $02F0		;CURSOR INHIBIT (00 = CURSOR ON)
-KEYDEL	= $02F1		;KEY DELAY
-CH1	= $02F2		;1-byte prior keyboard character
-CHACT	= $02F3		;CHACTL REGISTER RAM
-CHBAS	= $02F4		;CHBAS REGISTER RAM
-
-NEWROW	= $02F5		;##1200xl## 1-byte draw destination row
-NEWCOL	= $02F6		;##1200xl## 2-byte draw destination column
-ROWINC	= $02F8		;##1200xl## 1-byte draw row increment
-COLINC	= $02F9		;##1200xl## 1-byte draw column increment
-
-CHAR	= $02FA		;1-byte internal character
-ATACHR	= $02FB		;ATASCII CHARACTER
-CH	= $02FC		;GLOBAL VARIABLE FOR KEYBOARD
-FILDAT	= $02FD		;RIGHT FILL DATA <DRAW>
-DSPFLG	= $02FE		;DISPLAY FLAG   DISPLAY CNTLS IF NON-ZERO
-SSFLAG	= $02FF		;START/STOP FLAG FOR PAGING (CNTL 1). CLEARE
-
-;-------------------------------------------------------------------------
-; Page Three Address Equates
-;-------------------------------------------------------------------------
-
-DCB	= $0300		;DEVICE CONTROL BLOCK
-DDEVIC	= $0300		;PERIPHERAL UNIT 1 BUS I.D. NUMBER
-DUNIT	= $0301		;UNIT NUMBER
-DCOMND	= $0302		;BUS COMMAND
-DSTATS	= $0303		;COMMAND TYPE/STATUS RETURN
-DBUFLO	= $0304		;1-byte low data buffer address
-DBUFHI	= $0305		;1-byte high data buffer address
-DTIMLO	= $0306		;DEVICE TIME OUT IN 1 SECOND UNITS
-DUNUSE	= $0307		;UNUSED BYTE
-DBYTLO	= $0308		;1-byte low number of bytes to transfer
-DBYTHI	= $0309		;1-byte high number of bytes to transfer
-DAUX1	= $030A		;1-byte first command auxiliary
-DAUX2	= $030B		;1-byte second command auxiliary
-
-TIMER1	= $030C		;INITIAL TIMER VALUE
-;ADDCOR	= $030E		;##old## ADDITION CORRECTION
-JMPERS	= $030E		;##1200xl## 1-byte jumper options
-CASFLG	= $030F		;CASSETTE MODE WHEN SET
-TIMER2	= $0310		;2-byte final baud rate timer value
-TEMP1	= $0312		;TEMPORARY STORAGE REGISTER
-;TEMP2	= $0314		;##old## TEMPORARY STORAGE REGISTER
-TEMP2	= $0313		;##1200xl## 1-byte temporary 
-PTIMOT	= $0314		;##1200xl## 1-byte printer timeout
-TEMP3	= $0315		;TEMPORARY STORAGE REGISTER
-SAVIO	= $0316		;SAVE SERIAL IN DATA PORT
-TIMFLG	= $0317		;TIME OUT FLAG FOR BAUD RATE CORRECTION
-STACKP	= $0318		;SIO STACK POINTER SAVE CELL
-TSTAT	= $0319		;TEMPORARY STATUS HOLDER
-
-HATABS	= $031A		;35-byte handler address table (was 38 bytes)
-PUPBT1	= $033D		;##1200xl## 1-byte power-up validation byte 1
-PUPBT2	= $033E		;##1200xl## 1-byte power-up validation byte 2
-PUPBT3	= $033F		;##1200xl## 1-byte power-up validation byte 3
-
-IOCB	= $0340		;I/O CONTROL BLOCKS
-ICHID	= $0340		;HANDLER INDEX NUMBER (FF=IOCB FREE)
-ICDNO	= $0341		;DEVICE NUMBER (DRIVE NUMBER)
-ICCOM	= $0342		;COMMAND CODE
-ICSTA	= $0343		;STATUS OF LAST IOCB ACTION
-ICBAL	= $0344		;1-byte low buffer address
-ICBAH	= $0345		;1-byte high buffer address
-ICPTL	= $0346		;1-byte low PUT-BYTE routine address - 1
-ICPTH	= $0347		;1-byte high PUT-BYTE routine address - 1
-ICBLL	= $0348		;1-byte low buffer length
-ICBLH	= $0349		;1-byte high buffer length
-ICAX1	= $034A		;1-byte first auxiliary information
-ICAX2	= $034B		;1-byte second auxiliary information
-ICAX3	= $034C		;1-byte third auxiliary information
-ICAX4	= $034D		;1-byte fourth auxiliary information
-ICAX5	= $034E		;1-byte fifth auxiliary information
-ICSPR	= $034F		;SPARE BYTE
-
-PRNBUF	= $03C0		;PRINTER BUFFER
-SUPERF	= $03E8		;##1200xl## 1-byte editor super function flag
-CKEY	= $03E9		;##1200xl## 1-byte cassette boot request flag
-CASSBT	= $03EA		;##1200xl## 1-byte cassette boot flag
-CARTCK	= $03EB		;##1200xl## 1-byte cartridge equivalence check
-DERRF	= $03EC		;##rev2## 1-byte screen OPEN error flag
-
-; Remainder of Page Three Not Cleared upon Reset
-
-ACMVAR	= $03ED		;##1200xl## 11 bytes reserved for ACMI
-BASICF	= $03F8		;##rev2## 1-byte BASIC switch flag
-MINTLK	= $03F9		;##1200xl## 1-byte ACMI module interlock
-GINTLK	= $03FA		;##1200xl## 1-byte cartridge interlock
-CHLINK	= $03FB		;##1200xl## 2-byte loaded handler chain link
-CASBUF	= $03FD		;CASSETTE BUFFER
-
-;-------------------------------------------------------------------------
-; Page Four/Five Address Equates
-;-------------------------------------------------------------------------
-
-; USER AREA STARTS HERE AND GOES TO END OF PAGE FIVE
-USAREA	= $0480		;128 bytes reserved for application
-
-LBPR1	= $057E		;LBUFF PREFIX 1
-LBPR2	= $057F		;LBUFF PREFIX 2
-LBUFF	= $0580		;128-byte line buffer
-
-PLYARG	= $05E0		;6-byte floating point polynomial argument
-FPSCR	= $05E6		;6-byte floating point temporary
-FPSCR1	= $05EC		;6-byte floating point temporary
-
-;LBFEND	= $05FF		;##old## END OF LBUFF
-
-;-------------------------------------------------------------------------
-; Cartridge Address Equates
-;-------------------------------------------------------------------------
-
-CARTCS	= $BFFA		;##rev2## 2-byte cartridge coldstart address
-CART	= $BFFC		;##rev2## 1-byte cartridge present indicator
-CARTFG	= $BFFD		;##rev2## 1-byte cartridge flags
-CARTAD	= $BFFE		;##rev2## 2-byte cartridge start vector
-
-;-------------------------------------------------------------------------
-; CTIA/GTIA Address Equates
-;-------------------------------------------------------------------------
-
-GTIA	= $D000		;CTIA/GTIA area
-
-; Read/Write Addresses
-
-CONSOL	= $D01F		;console switches and speaker control
-
-; Read Addresses
-
-M0PF	= $D000		;missile 0 and playfield collision
-M1PF	= $D001		;missile 1 and playfield collision
-M2PF	= $D002		;missile 2 and playfield collision
-M3PF	= $D003		;missile 3 and playfield collision
-
-P0PF	= $D004		;player 0 and playfield collision
-P1PF	= $D005		;player 1 and playfield collision
-P2PF	= $D006		;player 2 and playfield collision
-P3PF	= $D007		;player 3 and playfield collision
-
-M0PL	= $D008		;missile 0 and player collision
-M1PL	= $D009		;missile 1 and player collision
-M2PL	= $D00A		;missile 2 and player collision
-M3PL	= $D00B		;missile 3 and player collision
-
-P0PL	= $D00C		;player 0 and player collision
-P1PL	= $D00D		;player 1 and player collision
-P2PL	= $D00E		;player 2 and player collision
-P3PL	= $D00F		;player 3 and player collision
-
-TRIG0	= $D010		;joystick trigger 0
-TRIG1	= $D011		;joystick trigger 1
-
-TRIG2	= $D012		;cartridge interlock
-TRIG3	= $D013		;ACMI module interlock
-
-PAL	= $D014		;##rev2## PAL/NTSC indicator
-
-; Write Addresses
-
-HPOSP0	= $D000		;player 0 horizontal position
-HPOSP1	= $D001		;player 1 horizontal position
-HPOSP2	= $D002		;player 2 horizontal position
-HPOSP3	= $D003		;player 3 horizontal position
-
-HPOSM0	= $D004		;missile 0 horizontal position
-HPOSM1	= $D005		;missile 1 horizontal position
-HPOSM2	= $D006		;missile 2 horizontal position
-HPOSM3	= $D007		;missile 3 horizontal position
-
-SIZEP0	= $D008		;player 0 size
-SIZEP1	= $D009		;player 1 size
-SIZEP2	= $D00A		;player 2 size
-SIZEP3	= $D00B		;player 3 size
-
-SIZEM	= $D00C		;missile sizes
-
-GRAFP0	= $D00D		;player 0 graphics
-GRAFP1	= $D00E		;player 1 graphics
-GRAFP2	= $D00F		;player 2 graphics
-GRAFP3	= $D010		;player 3 graphics
-
-GRAFM	= $D011		;missile graphics
-
-COLPM0	= $D012		;player-missile 0 color/luminance
-COLPM1	= $D013		;player-missile 1 color/luminance
-COLPM2	= $D014		;player-missile 2 color/luminance
-COLPM3	= $D015		;player-missile 3 color/luminance
-
-COLPF0	= $D016		;playfield 0 color/luminance
-COLPF1	= $D017		;playfield 1 color/luminance
-COLPF2	= $D018		;playfield 2 color/luminance
-COLPF3	= $D019		;playfield 3 color/luminance
-
-COLBK	= $D01A		;background color/luminance
-
-PRIOR	= $D01B		;priority select
-VDELAY	= $D01C		;vertical delay
-GRACTL	= $D01D		;graphic control
-HITCLR	= $D01E		;collision clear
-
-;-------------------------------------------------------------------------
-; PBI Address Equates
-;-------------------------------------------------------------------------
-
-PBI	= $D100		;##rev2## parallel bus interface area
-
-; Read Addresses
-
-PDVI	= $D1FF		;##rev2## parallel device IRQ status
-
-; Write Addresses
-
-PDVS	= $D1FF		;##rev2## parallel device select
-
-; PBI RAM Address Equates
-
-PBIRAM	= $D600		;##rev2## parallel bus interface RAM area
-
-; Parallel Device Address Equates
-
-PDID1	= $D803		;##rev2## parallel device ID 1
-PDIDV	= $D805		;##rev2## parallel device I/O vector
-PDIRQV	= $D808		;##rev2## parallel device IRQ vector
-PDID2	= $D80B		;##rev2## parallel device ID 2
-PDVV	= $D80D		;##rev2## parallel device vector table
-
-;-------------------------------------------------------------------------
-; POKEY Address Equates
-;-------------------------------------------------------------------------
-
-POKEY	= $D200		;POKEY area
-
-; Read Addresses
-
-POT0	= $D200		;potentiometer 0
-POT1	= $D201		;potentiometer 1
-POT2	= $D202		;potentiometer 2
-POT3	= $D203		;potentiometer 3
-POT4	= $D204		;potentiometer 4
-POT5	= $D205		;potentiometer 5
-POT6	= $D206		;potentiometer 6
-POT7	= $D207		;potentiometer 7
-
-ALLPOT	= $D208		;potentiometer port status
-KBCODE	= $D209		;keyboard code
-RANDOM	= $D20A		;random number generator
-SERIN	= $D20D		;serial port input
-IRQST	= $D20E		;IRQ interrupt status
-SKSTAT	= $D20F		;serial port and keyboard status
-
-; Write Addresses
-
-AUDF1	= $D200		;channel 1 audio frequency
-AUDC1	= $D201		;channel 1 audio control
-
-AUDF2	= $D202		;channel 2 audio frequency
-AUDC2	= $D203		;channel 2 audio control
-
-AUDF3	= $D204		;channel 3 audio frequency
-AUDC3	= $D205		;channel 3 audio control
-
-AUDF4	= $D206		;channel 4 audio frequency
-AUDC4	= $D207		;channel 4 audio control
-
-AUDCTL	= $D208		;audio control
-STIMER	= $D209		;start timers
-SKRES	= $D20A		;reset SKSTAT status
-POTGO	= $D20B		;start potentiometer scan sequence
-SEROUT	= $D20D		;serial port output
-IRQEN	= $D20E		;IRQ interrupt enable
-SKCTL	= $D20F		;serial port and keyboard control
-
-;-------------------------------------------------------------------------
-; PIA Address Equates
-;-------------------------------------------------------------------------
-
-PIA	= $D300		;PIA area
-
-PORTA	= $D300		;port A direction register or jacks one/two
-PORTB	= $D301		;port B direction register or memory management
-
-PACTL	= $D302		;port A control
-PBCTL	= $D303		;port B control
-
-;-------------------------------------------------------------------------
-; ANTIC Address Equates
-;-------------------------------------------------------------------------
-
-ANTIC	= $D400		;ANTIC area
-
-; Read Addresses
-
-VCOUNT	= $D40B		;vertical line counter
-PENH	= $D40C		;light pen horizontal position
-PENV	= $D40D		;light pen vertical position
-NMIST	= $D40F		;NMI interrupt status
-
-; Write Addresses
-
-DMACTL	= $D400		;DMA control
-CHACTL	= $D401		;character control
-DLISTL	= $D402		;low display list address
-DLISTH	= $D403		;high display list address
-HSCROL	= $D404		;horizontal scroll
-VSCROL	= $D405		;vertical scroll
-PMBASE	= $D407		;player-missile base address
-CHBASE	= $D409		;character base address
-WSYNC	= $D40A		;wait for HBLANK synchronization
-NMIEN	= $D40E		;NMI enable
-NMIRES	= $D40F		;NMI interrupt reset
-
-;-------------------------------------------------------------------------
-; Floating Point Package Address Equates
-;-------------------------------------------------------------------------
-
-AFP	= $D800		;convert ASCII to floating point
-FASC	= $D8E6		;convert floating point to ASCII
-IFP	= $D9AA		;convert integer to floating point
-FPI	= $D9D2		;convert floating point to integer
-ZFR0	= $DA44		;zero FR0
-ZF1	= $DA46		;zero floating point number
-FSUB	= $DA60		;subtract floating point numbers
-FADD	= $DA66		;add floating point numbers
-FMUL	= $DADB		;multiply floating point numbers
-FDIV	= $DB28		;divide floating point numbers
-PLYEVL	= $DD40		;evaluate floating point polynomial
-FLD0R	= $DD89		;load floating point number
-FLD0P	= $DD8D		;load floating point number
-FLD1R	= $DD98		;load floating point number
-PLD1P	= $DD9C		;load floating point number
-FST0R	= $DDA7		;store floating point number
-FST0P	= $DDAB		;store floating point number
-FMOVE	= $DDB6		;move floating point number
-LOG	= $DECD		;calculate floating point logarithm
-LOG10	= $DED1		;calculate floating point base 10 logarithm
-EXP	= $DDC0		;calculate floating point exponential
-EXP10	= $DDCC		;calculate floating point base 10 exponential
-
-;-------------------------------------------------------------------------
-; Device Handler Vector Table Address Equates
-;-------------------------------------------------------------------------
-
-EDITRV	= $E400		;editor handler vector table
-SCRENV	= $E410		;screen handler vector table
-KEYBDV	= $E420		;keyboard handler vector table
-PRINTV	= $E430		;printer handler vector table
-CASETV	= $E440		;cassette handler vector table
-
-;-------------------------------------------------------------------------
-; Jump Vector Address Equates
-;-------------------------------------------------------------------------
-
-DISKIV	= $E450		;vector to initialize DIO
-DSKINV	= $E453		;vector to DIO
-CIOV	= $E456		;vector to CIO
-SIOV	= $E459		;vector to SIO
-SETVBV	= $E45C		;vector to set VBLANK parameters
-SYSVBV	= $E45F		;vector to process immediate VBLANK
-XITVBV	= $E462		;vector to process deferred VBLANK
-SIOINV	= $E465		;vector to initialize SIO
-SENDEV	= $E468		;vector to enable SEND
-INTINV	= $E46B		;vector to initialize interrupt handler
-CIOINV	= $E46E		;vector to initialize CIO
-BLKBDV	= $E471		;vector to power-up display
-WARMSV	= $E474		;vector to warmstart
-COLDSV	= $E477		;vector to coldstart
-RBLOKV	= $E47A		;vector to read cassette block
-CSOPIV	= $E47D		;vector to open cassette for input
-VCTABL	= $E480		;RAM vector initial value table
-PUPDIV	= $E480		;##rev2## vector to power-up display
-SLFTSV	= $E483		;##rev2## vector to self-test
-PHENTV	= $E486		;##rev2## vector to enter peripheral handler
-PHUNLV	= $E489		;##rev2## vector to unlink peripheral handler
-PHINIV	= $E48C		;##rev2## vector to initialize peripheral handler
-GPDVV	= $E48F		;##rev2## generic parallel device handler vector
-
-; NOTE: OS rom self-test labels are not included in this file
-
-;-------------------------------------------------------------------------
-; Some misc. stuff from the 400/800 rev.B source
-;-------------------------------------------------------------------------
-
-; THE FOLLOWING ARE IN BASIC CARTRIDGE:
-SIN	= $BD81		;FR0 <- SIN (FR0) DEGFLG (0=RAD,6=DEG) CARRY
-COS	= $BD73		;FR0 <- COS (FR0) CARRY
-ATAN	= $BE43		;FR0 <- ATAN(FR0) CARRY
-SQR	= $BEB1		;FR0 <- ROOT(FR0) CARRY
-
-RADON	= 0		;INDICATES RADIANS
-DEGON	= 6		;INDICATES DEGREES
-
-ASCZER	= '0'		;ASCII ZERO
-COLON	= $3A		;ASCII COLON 
-CR	= $9B		;SYSTEM EOL (CARRIAGE RETURN)
-
-;-------------------------------------------------------------------------
-; 6502
-;-------------------------------------------------------------------------
-
-NMIVEC	= $FFFA
-RESVEC	= $FFFC
-IRQVEC	= $FFFE
-
-;-------------------------------------------------------------------------
-; BASIC
-;-------------------------------------------------------------------------
-
-LOMEM	= $80		;2-byte low memory pointer
-VNTP	= $82		;2-byte variable name table address
-VNTD	= $84		;2-byte variable name table end + 1
-VVTP	= $86		;2-byte variable value table
-STMTAB	= $88		;2-byte statement table address
-STMCUR	= $8A		;2-byte current statement pointer
-STARP	= $8C		;2-byte string and array table pointer
-RUNSTK	= $8E		;2-byte runtime stack address
-;MEMTOP	= $90		;2-byte top of memory pointer
-STOPLN	= $BA		;2-byte stopped line number
-ERRSAVE	= $C3		;1-byte error code
-PTABW	= $C9		;1-byte tab width
-
-;-------------------------------------------------------------------------
-; DOS
-;-------------------------------------------------------------------------
-
-DOS	= $0700
-
-RENAME	= $20		;RENAME DISK FILE
-DELETE	= $21		;DELETE DISK FILE
-LOCKFL	= $23		;LOCK FILE TO READ ONLY
-UNLOCK	= $24		;UNLOCK LOCKED FILE
-POINT	= $25		;POINT SECTOR
-NOTE	= $26		;NOTE SECTOR
-FORMAT	= $FE		;FORMAT
-
-; Command line table, Index values for (DOSVEC),Y -- COMTAB
-; Compatible with OS/A+, DOS XL and SpartaDOS
-
-COMTAB	= 0		;DOS entry jump vector
-ZCRNAME	= 3		;file name crunch routine jump vector
-BUFOFF	= 10		;next parameter buffer offset
-COMFNAM	= 33		;destination buffer for crunch routine
-LBUF	= 63		;command line input buffer
-
-;-------------------------------------------------------------------------
-; ATASCII CHARACTER DEFS
-;-------------------------------------------------------------------------
-
-ATCLR	= $7D		;CLEAR SCREEN CHARACTER
-ATRUB	= $7E		;BACK SPACE (RUBOUT)
-ATTAB	= $7F		;TAB
-ATEOL	= $9B		;END-OF-LINE
-ATDELL	= $9C		;delete line
-ATINSL	= $9D		;insert line
-ATCTAB	= $9E		;clear TAB
-ATSTAB	= $9F		;set TAB
-ATBEL	= $FD		;CONSOLE BELL
-ATDEL	= $FE		;delete char.
-ATINS	= $FF		;insert char.
-ATURW	= $1C		;UP-ARROW
-ATDRW	= $1D		;DOWN-ARROW
-ATLRW	= $1E		;LEFT-ARROW
-ATRRW	= $1F		;RIGHT-ARROW
-ATESC	= $1B		;ESCAPE
-
-;-------------------------------------------------------------------------
-; OFFSETS INTO SECTSIZETAB (DIO functions)
-;-------------------------------------------------------------------------
-
-sst_flag     = 0	; length 1
-sst_sectsize = 1	;        2
-sst_driveno  = 3	;        1  (drive #)
-sst_size     = 4	; size of one entry
-			; if changed, adapt diopncls.s
-
-;-------------------------------------------------------------------------
-; OFFSETS INTO dio_phys_pos
-;-------------------------------------------------------------------------
-
-diopp_head   = 0	; head
-diopp_track  = 1	; track / cylinder
-diopp_sector = 3	; sector
-diopp_size   = 5	; size of structure
-
-;-------------------------------------------------------------------------
-; VALUES for dos_type
-;-------------------------------------------------------------------------
-
-ATARIDOS     = 0
-SPARTADOS    = 1
-OSADOS       = 2	; OS/A+
-MYDOS        = 3
-NODOS        = 255
-
-;-------------------------------------------------------------------------
-; End of atari.inc
-;-------------------------------------------------------------------------
-