burn 0.1.0 → 0.1.1

data/lib/burn/tools/mac/cc65/asminc/atari.inc

@@ -1,1175 +0,0 @@
-;-------------------------------------------------------------------------
-; Atari System Equates
-; by Freddy Offenga, Christian Groessler, and Christian Krueger
-;
-; References:
-; - Atari 400/800 OS rev.B source code, Atari 1979
-; - Atari OS manual - XL addendum
-; - Atari XL/XE rev.2 source code, Atari 1984
-; - Mapping the Atari - revised edition, Ian Chadwick 1985
-;
-; ##old##       old OS rev.B label - moved or deleted
-; ##1200xl##    new label introduced in 1200XL OS (rev.10/11)
-; ##rev2##      new label introduced in XL/XE OS rev.2
-;-------------------------------------------------------------------------
-
-;-------------------------------------------------------------------------
-; Configuration Equates
-;-------------------------------------------------------------------------
-
-MAXDEV  = 33            ;offset to last possible entry of HATABS
-IOCBSZ  = 16            ;length of IOCB
-
-SEIOCB  = 0*IOCBSZ      ;##rev2## screen editor IOCB index
-MAXIOC  = 8*IOCBSZ      ;first invalid IOCB index
-
-DSCTSZ  = 128           ;##rev2## disk sector size
-
-LEDGE   = 2             ;left edge
-REDGE   = 39            ;right edge
-
-INIML   = $0700         ;##rev2## initial MEMLO
-
-ICSORG  = $CC00         ;##rev2## international character set origin
-DCSORG  = $E000         ;##rev2## domestic character set origin
-
-; IOCB Command Code Equates
-
-OPEN    = $03           ;open
-GETREC  = $05           ;get record
-GETCHR  = $07           ;get character(s)
-PUTREC  = $09           ;put record
-PUTCHR  = $0B           ;put character(s)
-CLOSE   = $0C           ;close
-STATIS  = $0D           ;status
-SPECIL  = $0E           ;special
-
-; DOS IOCB command codes
-
-RENAME  = $20           ;rename disk file
-DELETE  = $21           ;delete disk file
-LOCKFL  = $23           ;lock file (set to read-only)
-UNLOCK  = $24           ;unlock file
-POINT   = $25           ;point sector
-NOTE    = $26           ;note sector
-GETFL   = $27           ;get file length
-CHDIR_MYDOS     = $29   ;change directory (MyDOS)
-MKDIR   = $2A           ;make directory (MyDOS/SpartaDOS)
-RMDIR   = $2B           ;remove directory (SpartaDOS)
-CHDIR_SPDOS     = $2C   ;change directory (SpartaDOS)
-FORMAT  = $FE           ;format
-
-GETCWD  = $30           ;get current directory (MyDOS/SpartaDOS)
-
-; Special Entry Command Equates
-; DOS Commands
-; Command line table, Index values for (DOSVEC),Y -- COMTAB
-; Compatible with OS/A+, DOS XL and SpartaDOS
-
-COMTAB  = 0             ;DOS entry jump vector
-ZCRNAME = 3             ;file name crunch routine jump vector
-BUFOFF  = 10            ;next parameter buffer offset
-COMFNAM = 33            ;destination buffer for crunch routine
-LBUF    = 63            ;command line input buffer
-
-; Screen IOCB Commands
-
-DRAWLN  = $11           ;draw line
-FILLIN  = $12           ;draw line with right fill
-
-; ICAX1 Auxiliary Byte 1 Equates
-
-APPEND  = $01           ;open write append (D:)
-DIRECT  = $02           ;open for directory access (D:)
-OPNIN   = $04           ;open for input (all devices)
-OPNOT   = $08           ;open for output (all devices)
-MXDMOD  = $10           ;open for mixed mode (E:, S:)
-INSCLR  = $20           ;open for input without clearing screen
-
-; Device Code Equates
-
-CASSET  = 'C'           ;cassette
-DISK    = 'D'           ;disk
-SCREDT  = 'E'           ;screen editor
-KBD     = 'K'           ;keyboard
-PRINTR  = 'P'           ;printer
-DISPLY  = 'S'           ;screen display
-
-; SIO Command Code Equates
-
-SIO_FORMAT   = $21      ;format disk (default density)
-SIO_FORMATS  = $22      ;1050: format medium density
-SIO_CONFIG   = $44      ;configure drive
-SIO_CONFIGSF = $4B      ;slow/fast configure drive??
-SIO_WRITE    = $50      ;write sector
-SIO_READ     = $52      ;read sector
-SIO_STAT     = $53      ;get status information
-SIO_VERIFY   = $56      ;verify sector 
-SIO_WRITEV   = $57      ;write sector with verify
-
-; Character and Key Code Equates
-
-CLS     = $7D           ;##rev2## clear screen
-EOL     = $9B           ;end of line (RETURN)
-
-HELP    = $11           ;##1200xl## key code for HELP
-CNTLF1  = $83           ;##1200xl## key code for CTRL-F1
-CNTLF2  = $84           ;##1200xl## key code for CTRL-F2
-CNTLF3  = $93           ;##1200xl## key code for CTRL-F3
-CNTLF4  = $94           ;##1200xl## key code for CTRL-F4
-CNTL1   = $9F           ;##1200xl## key code for CTRL-1
-
-; Status Code Equates
-
-SUCCES  = 1             ;($01) succesful operation
-
-BRKABT  = 128           ;($80) BREAK key abort
-PRVOPN  = 129           ;($81) IOCB already open error
-NONDEV  = 130           ;($82) nonexistent device error
-WRONLY  = 131           ;($83) IOCB opened for write only error
-NVALID  = 132           ;($84) invalid command error
-NOTOPN  = 133           ;($85) device/file not open error
-BADIOC  = 134           ;($86) invalid IOCB index error
-RDONLY  = 135           ;($87) IOCB opened for read only error
-EOFERR  = 136           ;($88) end of file error
-TRNRCD  = 137           ;($89) truncated record error
-TIMOUT  = 138           ;($8A) peripheral device timeout error
-DNACK   = 139           ;($8B) device does not acknowledge command
-FRMERR  = 140           ;($8C) serial bus framing error
-CRSROR  = 141           ;($8D) cursor overrange error
-OVRRUN  = 142           ;($8E) serial bus data overrun error
-CHKERR  = 143           ;($8F) serial bus checksum error
-DERROR  = 144           ;($90) device done (operation incomplete)
-BADMOD  = 145           ;($91) bad screen mode number error
-FNCNOT  = 146           ;($92) function not implemented in handler
-SCRMEM  = 147           ;($93) insufficient memory for screen mode
-
-DSKFMT  = 148           ;($94) SpartaDOS: unrecognized disk format
-INCVER  = 149           ;($95) SpartaDOS: disk was made with incompat. version
-DIRNFD  = 150           ;($96) SpartaDOS: directory not found
-FEXIST  = 151           ;($97) SpartaDOS: file exists
-NOTBIN  = 152           ;($98) SpartaDOS: file not binary
-LSYMND  = 154           ;($9A) SDX: loader symbol not defined
-BADPRM  = 156           ;($9C) SDX: bad parameter
-OUTOFM  = 158           ;($9E) SDX: out of memory
-INVDEV  = 160           ;($A0) invalid device number
-TMOF    = 161           ;($A1) too many open files
-DSKFLL  = 162           ;($A2) disk full
-FATLIO  = 163           ;($A3) fatal I/O error
-FNMSMT  = 164           ;($A4) internal file number mismatch
-INVFNM  = 165           ;($A5) invalid file name
-PDLERR  = 166           ;($A6) point data length error
-EPERM   = 167           ;($A7) permission denied
-DINVCM  = 168           ;($A8) command invalid for disk
-DIRFLL  = 169           ;($A9) directory full
-FNTFND  = 170           ;($AA) file not found
-PNTINV  = 171           ;($AB) point invalid
-BADDSK  = 173           ;($AD) bad disk
-INCFMT  = 176           ;($B0) DOS 3: incompatible file system
-
-; DCB Device Bus Equates
-
-DISKID  = $31           ;##rev2## disk bus ID
-PDEVN   = $40           ;##rev2## printer bus ID
-CASET   = $60           ;##rev2## cassette bus ID
-
-; Bus Command Equates
-
-FOMAT   = '!'           ;##rev2## format command
-PUTSEC  = 'P'           ;##rev2## put sector command
-READ    = 'R'           ;##rev2## read command
-STATC   = 'S'           ;##rev2## status command
-WRITE   = 'W'           ;##rev2## write command
-
-; Command Auxiliary Byte Equates
-
-DOUBLE  = 'D'           ;##rev2## print 20 characters double width
-NORMAL  = 'N'           ;##rev2## print 40 characters normally
-PLOT    = 'P'           ;##rev2## plot
-SIDWAY  = 'S'           ;##rev2## print 16 characters sideways
-
-; Bus Response Equates
-
-ACK     = 'A'           ;##rev2## device acknowledged
-COMPLT  = 'C'           ;##rev2## device succesfully completed operation
-ERROR   = 'E'           ;##rev2## device incurred error
-NACK    = 'N'           ;##rev2## device did not understand
-
-; Floating Point Miscellaneous Equates
-
-FPREC   = 6             ;precision
-
-FMPREC  = FPREC-1       ;##rev2## length of mantissa
-
-; Cassette Record Type Equates
-
-HDR     = $FB           ;##rev2## header
-DTA     = $FC           ;##rev2## data record
-DT1     = $FA           ;##rev2## last data record
-EOT     = $FE           ;##rev2## end of tape (file)
-
-TONE1   = 2             ;##rev2## record
-TONE2   = 1             ;##rev2## playback
-
-; Cassette Timing Equates
-
-WLEADN  = 1152          ;##rev2## NTSC 19.2 second WRITE file leader
-RLEADN  = 576           ;##rev2## NTSC 9.6 second READ file leader
-WIRGLN  = 180           ;##rev2## NTSC 3.0 second WRITE IRG
-RIRGLN  = 120           ;##rev2## NTSC 2.0 second READ IRG
-WSIRGN  = 15            ;##rev2## NTSC 0.25 second WRITE short IRG
-RSIRGN  = 10            ;##rev2## NTSC 0.16 second READ short IRG
-BEEPNN  = 30            ;##rev2## NTSC 0.5 second beep duration
-BEEPFN  = 10            ;##rev2## NTSC 0.16 seconrd beep duration
-
-WLEADP  = 960           ;##rev2## PAL 19.2 second WRITE file leader
-RLEADP  = 480           ;##rev2## PAL 9.6 second READ file leader
-WIRGLP  = 150           ;##rev2## PAL 3.0 second WRITE IRG
-RIRGLP  = 100           ;##rev2## PAL 2.0 second READ IRG
-WSIRGP  = 13            ;##rev2## PAL 0.25 second WRITE short IRG
-RSIRGP  = 8             ;##rev2## PAL 0.16 second READ short IRG
-BEEPNP  = 25            ;##rev2## PAL 0.5 second beep duration
-BEEPFP  = 8             ;##rev2## PAL 0.16 seconrd beep duration
-
-WIRGHI  = 0             ;##rev2## high WRITE IRG
-RIRGHI  = 0             ;##rev2## high READ IRG
-
-; Power-up Validation Byte Value Equates
-
-PUPVL1  = $5C           ;##rev2## power-up validation value 1
-PUPVL2  = $93           ;##rev2## power-up validation value 2
-PUPVL3  = $25           ;##rev2## power-up validation value 3
-
-; Relocating Loader Miscellaneous Equates
-
-DATAER  = 156           ;##rev2## end of record appears before END
-MEMERR  = 157           ;##rev2## memory insufficient for load error
-
-; Miscellaneous Equates
-
-IOCFRE  = $FF           ;IOCB free indication
-
-B19200  = $0028         ;##rev2## 19200 baud POKEY counter value
-B00600  = $05CC         ;##rev2## 600 baud POKEY counter value
-
-HITONE  = $05           ;##rev2## FSK high freq. POKEY counter value
-LOTONE  = $07           ;##rev2## FSK low freq. POKEY counter value
-
-NCOMLO  = $34           ;##rev2## PIA lower NOT COMMAND line command
-NCOMHI  = $3C           ;##rev2## PIA raise NOT COMMAND line command
-
-MOTRGO  = $34           ;##rev2## PIA cassette motor ON command
-MOTRST  = $3C           ;##rev2## PIA cassette motor OFF command
-
-NODAT   = $00           ;##rev2## SIO immediate operation
-GETDAT  = $40           ;##rev2## SIO read data frame
-PUTDAT  = $80           ;##rev2## SIO write data frame
-
-CRETRI  = 13            ;##rev2## number of command frame retries
-DRETRI  = 1             ;##rev2## number of device retries
-CTIM    = 2             ;##rev2## command frame ACK timeout
-
-NBUFSZ  = 40            ;##rev2## print normal buffer size
-DBUFSZ  = 20            ;##rev2## print double buffer size
-SBUFSZ  = 29            ;##rev2## print sideways buffer size
-
-;-------------------------------------------------------------------------
-; Page Zero Address Equates
-;-------------------------------------------------------------------------
-
-LINZBS  = $00           ;LINBUG RAM (WILL BE REPLACED BY MONITOR RAM)
-LNFLG   = $00           ;##1200xl## 1-byte LNBUG flag (0 = not LNBUG)
-NGFLAG  = $01           ;##1200xl## 1-byte memory status (0 = failure)
-
-; Not Cleared
-
-CASINI  = $02           ;CASSETTE INIT LOCATION
-RAMLO   = $04           ;RAM POINTER FOR MEMORY TEST
-TRAMSZ  = $06           ;TEMPORARY REGISTER FOR RAM SIZE
-;TSTDAT = $07           ;##old## RAM TEST DATA REGISTER
-CMCMD   = $07           ;##rev2## 1-byte command communications
-
-; Cleared upon Coldstart only
-
-WARMST  = $08           ;WARM START FLAG
-BOOTQ   = $09           ;SUCCESSFUL BOOT FLAG
-DOSVEC  = $0A           ;DISK SOFTWARE START VECTOR
-DOSINI  = $0C           ;DISK SOFTWARE INIT ADDRESS
-APPMHI  = $0E           ;APPLICATIONS MEMORY HI LIMIT
-
-; Cleared upon Coldstart or Warmstart
-
-INTZBS  = $10           ;INTERRUPT HANDLER
-
-POKMSK  = $10           ;SYSTEM MASK FOR POKEY IRG ENABLE
-BRKKEY  = $11           ;BREAK KEY FLAG
-RTCLOK  = $12           ;REAL TIME CLOCK (IN 16 MSEC UNITS>
-BUFADR  = $15           ;INDIRECT BUFFER ADDRESS REGISTER
-ICCOMT  = $17           ;COMMAND FOR VECTOR
-DSKFMS  = $18           ;DISK FILE MANAGER POINTER
-DSKUTL  = $1A           ;DISK UTILITIES POINTER
-ABUFPT  = $1C           ;##1200xl## 4-byte ACMI buffer pointer area
-
-;PTIMOT = $1C           ;##old## PRINTER TIME OUT REGISTER
-;PBPNT  = $1D           ;##old## PRINT BUFFER POINTER
-;PBUFSZ = $1E           ;##old## PRINT BUFFER SIZE
-;PTEMP  = $1F           ;##old## TEMPORARY REGISTER
-
-ZIOCB   = $20           ;ZERO PAGE I/O CONTROL BLOCK
-IOCBAS  = $20           ;16-byte page zero IOCB
-ICHIDZ  = $20           ;HANDLER INDEX NUMBER (FF = IOCB FREE)
-ICDNOZ  = $21           ;DEVICE NUMBER (DRIVE NUMBER)
-ICCOMZ  = $22           ;COMMAND CODE
-ICSTAZ  = $23           ;STATUS OF LAST IOCB ACTION
-ICBALZ  = $24           ;BUFFER ADDRESS LOW BYTE
-ICBAHZ  = $25           ;1-byte high buffer address
-ICPTLZ  = $26           ;PUT BYTE ROUTINE ADDRESS -1
-ICPTHZ  = $27           ;1-byte high PUT-BYTE routine address
-ICBLLZ  = $28           ;BUFFER LENGTH LOW BYTE
-ICBLHZ  = $29           ;1-byte high buffer length
-ICAX1Z  = $2A           ;AUXILIARY INFORMATION FIRST BYTE
-ICAX2Z  = $2B           ;1-byte second auxiliary information
-ICSPRZ  = $2C           ;4-byte spares
-
-ENTVEC  = $2C           ;##rev2## 2-byte (not used)
-ICIDNO  = $2E           ;IOCB NUMBER X 16
-CIOCHR  = $2F           ;CHARACTER BYTE FOR CURRENT OPERATION
-
-STATUS  = $30           ;INTERNAL STATUS STORAGE
-CHKSUM  = $31           ;CHECKSUM (SINGLE BYTE SUM WITH CARRY)
-BUFRLO  = $32           ;POINTER TO DATA BUFFER (LO BYTE)
-BUFRHI  = $33           ;POINTER TO DATA BUFFER (HI BYTE)
-BFENLO  = $34           ;NEXT BYTE PAST END OF THE DATA BUFFER LO
-BFENHI  = $35           ;NEXT BYTE PAST END OF THE DATA BUFFER HI
-;CRETRY = $36           ;##old## NUMBER OF COMMAND FRAME RETRIES
-;DRETRY = $37           ;##old## NUMBER OF DEVICE RETRIES
-LTEMP   = $36           ;##1200xl## 2-byte loader temporary
-BUFRFL  = $38           ;DATA BUFFER FULL FLAG
-RECVDN  = $39           ;RECEIVE DONE FLAG
-XMTDON  = $3A           ;TRANSMISSION DONE FLAG
-CHKSNT  = $3B           ;CHECKSUM SENT FLAG
-NOCKSM  = $3C           ;NO CHECKSUM FOLLOWS DATA FLAG
-BPTR    = $3D           ;1-byte cassette buffer pointer
-FTYPE   = $3E           ;1-byte cassette IRG type
-FEOF    = $3F           ;1-byte cassette EOF flag (0 = quiet)
-FREQ    = $40           ;1-byte cassette beep counter
-SOUNDR  = $41           ;NOISY I/0 FLAG. (ZERO IS QUIET)
-
-CRITIC  = $42           ;DEFINES CRITICAL SECTION (CRITICAL IF NON-Z)
-
-FMSZPG  = $43           ;DISK FILE MANAGER SYSTEM ZERO PAGE
-
-;CKEY   = $4A           ;##old## FLAG SET WHEN GAME START PRESSED
-ZCHAIN  = $4A           ;##1200xl## 2-byte handler linkage chain pointer
-;CASSBT = $4B           ;##old## CASSETTE BOOT FLAG
-DSTAT   = $4C           ;DISPLAY STATUS
-ATRACT  = $4D           ;ATRACT FLAG
-DRKMSK  = $4E           ;DARK ATRACT MASK
-COLRSH  = $4F           ;ATRACT COLOR SHIFTER (EOR'ED WITH PLAYFIELD
-
-
-TMPCHR  = $50           ;1-byte temporary character
-HOLD1   = $51           ;1-byte temporary
-LMARGN  = $52           ;left margin (normally 2, cc65 C startup code sets it to 0)
-RMARGN  = $53           ;right margin (normally 39 if no XEP80 is used)
-ROWCRS  = $54           ;1-byte cursor row
-COLCRS  = $55           ;2-byte cursor column
-DINDEX  = $57           ;1-byte display mode
-SAVMSC  = $58           ;2-byte saved memory scan counter
-OLDROW  = $5A           ;1-byte prior row
-OLDCOL  = $5B           ;2-byte prior column
-OLDCHR  = $5D           ;DATA UNDER CURSOR
-OLDADR  = $5E           ;2-byte saved cursor memory address
-FKDEF   = $60           ;##1200xl## 2-byte function key definition table
-;NEWROW = $60           ;##old## POINT DRAW GOES TO
-;NEWCOL = $61           ;##old##
-PALNTS  = $62           ;##1200xl## 1-byte PAL/NTSC indicator (0 = NTSC)
-LOGCOL  = $63           ;POINTS AT COLUMN IN LOGICAL LINE
-ADRESS  = $64           ;2-byte temporary address
-
-MLTTMP  = $66           ;1-byte temporary
-OPNTMP  = $66           ;FIRST BYTE IS USED IN OPEN AS TEMP
-TOADR   = $66           ;##rev2## 2-byte destination address
-
-SAVADR  = $68           ;2-byte saved address
-FRMADR  = $68           ;##rev2## 2-byte source address
-
-RAMTOP  = $6A           ;RAM SIZE DEFINED BY POWER ON LOGIC
-BUFCNT  = $6B           ;BUFFER COUNT
-BUFSTR  = $6C           ;EDITOR GETCH POINTER
-BITMSK  = $6E           ;BIT MASK
-SHFAMT  = $6F           ;1-byte shift amount for pixel justifucation
-ROWAC   = $70           ;2-byte draw working row
-COLAC   = $72           ;2-byte draw working column
-ENDPT   = $74           ;2-byte end point
-DELTAR  = $76           ;1-byte row difference
-DELTAC  = $77           ;2-byte column difference
-KEYDEF  = $79           ;##1200xl## 2-byte key definition table address
-;ROWINC = $79           ;##old##
-;COLINC = $7A           ;##old##
-SWPFLG  = $7B           ;NON-0 1F TXT AND REGULAR RAM IS SWAPPED
-HOLDCH  = $7C           ;CH IS MOVED HERE IN KGETCH BEFORE CNTL & SH
-INSDAT  = $7D           ;1-byte temporary
-COUNTR  = $7E           ;2-byte draw iteration count
-
-; Floating Point Package Page Zero Address Equates
-
-FR0     = $D4           ;6-byte register 0
-FR0M    = $D5           ;##rev2## 5-byte register 0 mantissa
-QTEMP   = $D9           ;##rev2## 1-byte temporary
-
-FRE     = $DA           ;6-byte (internal) register E
-
-FR1     = $E0           ;FP REG1
-FR1M    = $E1           ;##rev2## 5-byte register 1 mantissa
-
-FR2     = $E6           ;6-byte (internal) register 2
-
-FRX     = $EC           ;1-byte temporary
-
-EEXP    = $ED           ;VALUE OF E
-
-FRSIGN  = $EE           ;##rev2## 1-byte floating point sign
-NSIGN   = $EE           ;SIGN OF #
-
-PLYCNT  = $EF           ;##rev2## 1-byte polynomial degree
-ESIGN   = $EF           ;SIGN OF EXPONENT
-
-SGNFLG  = $F0           ;##rev2## 1-byte sign flag
-FCHRFLG = $F0           ;1ST CHAR FLAG
-
-XFMFLG  = $F1           ;##rev2## 1-byte transform flag
-DIGRT   = $F1           ;# OF DIGITS RIGHT OF DECIMAL
-
-CIX     = $F2           ;CURRENT INPUT INDEX
-INBUFF  = $F3           ;POINTS TO USER'S LINE INPUT BUFFER
-
-ZTEMP1  = $F5           ;2-byte temporary
-ZTEMP4  = $F7           ;2-byte temporary
-ZTEMP3  = $F9           ;2-byte temporary
-
-;DEGFLG = $FB           ;##old## same as RADFLG
-;RADFLG = $FB           ;##old## 0=RADIANS, 6=DEGREES
-
-FLPTR   = $FC           ;2-byte floating point number pointer
-FPTR2   = $FE           ;2-byte floating point number pointer
-
-;-------------------------------------------------------------------------
-; Page Two Address Equates
-;-------------------------------------------------------------------------
-
-INTABS  = $0200         ;INTERRUPT RAM
-
-VDSLST  = $0200         ;DISPLAY LIST NMI VECTOR
-VPRCED  = $0202         ;PROCEED LINE IRQ VECTOR
-VINTER  = $0204         ;INTERRUPT LINE IRQ VECTOR
-VBREAK  = $0206         ;SOFTWARE BREAK (00) INSTRUCTION IRQ VECTOR
-VKEYBD  = $0208         ;POKEY KEYBOARD IRQ VECTOR
-VSERIN  = $020A         ;POKEY SERIAL INPUT READY IRQ
-VSEROR  = $020C         ;POKEY SERIAL OUTPUT READY IRQ
-VSEROC  = $020E         ;POKEY SERIAL OUTPUT COMPLETE IRQ
-VTIMR1  = $0210         ;POKEY TIMER 1 IRG
-VTIMR2  = $0212         ;POKEY TIMER 2 IRG
-VTIMR4  = $0214         ;POKEY TIMER 4 IRG
-VIMIRQ  = $0216         ;IMMEDIATE IRG VECTOR
-CDTMV1  = $0218         ;COUNT DOWN TIMER 1
-CDTMV2  = $021A         ;COUNT DOWN TIMER 2
-CDTMV3  = $021C         ;COUNT DOWN TIMER 3
-CDTMV4  = $021E         ;COUNT DOWN TIMER 4
-CDTMV5  = $0220         ;COUNT DOWN TIMER 5
-VVBLKI  = $0222         ;IMMEDIATE VERTICAL BLANK NMI VECTOR
-VVBLKD  = $0224         ;DEFERRED VERTICAL BLANK NMI VECTOR
-CDTMA1  = $0226         ;COUNT DOWN TIMER 1 JSR ADDRESS
-CDTMA2  = $0228         ;COUNT DOWN TIMER 2 JSR ADDRESS
-CDTMF3  = $022A         ;COUNT DOWN TIMER 3 FLAG
-SRTIMR  = $022B         ;SOFTWARE REPEAT TIMER
-CDTMF4  = $022C         ;COUNT DOWN TIMER 4 FLAG
-INTEMP  = $022D         ;IAN'S TEMP
-CDTMF5  = $022E         ;COUNT DOWN TIMER FLAG 5
-SDMCTL  = $022F         ;SAVE DMACTL REGISTER
-SDLSTL  = $0230         ;SAVE DISPLAY LIST LOW BYTE
-SDLSTH  = $0231         ;SAVE DISPLAY LIST HI BYTE
-SSKCTL  = $0232         ;SKCTL REGISTER RAM
-LCOUNT  = $0233         ;##1200xl## 1-byte relocating loader record
-LPENH   = $0234         ;LIGHT PEN HORIZONTAL VALUE
-LPENV   = $0235         ;LIGHT PEN VERTICAL VALUE
-BRKKY   = $0236         ;BREAK KEY VECTOR
-;RELADR = $0238         ;##1200xl## 2-byte relocatable loader address
-VPIRQ   = $0238         ;##rev2## 2-byte parallel device IRQ vector
-CDEVIC  = $023A         ;COMMAND FRAME BUFFER - DEVICE
-CCOMND  = $023B         ;COMMAND
-CAUX1   = $023C         ;COMMAND AUX BYTE 1
-CAUX2   = $023D         ;COMMAND AUX BYTE 2
-
-TEMP    = $023E         ;TEMPORARY RAM CELL
-
-ERRFLG  = $023F         ;ERROR FLAG - ANY DEVICE ERROR EXCEPT TIME OUT
-
-DFLAGS  = $0240         ;DISK FLAGS FROM SECTOR ONE
-DBSECT  = $0241         ;NUMBER OF DISK BOOT SECTORS
-BOOTAD  = $0242         ;ADDRESS WHERE DISK BOOT LOADER WILL BE PUT
-COLDST  = $0244         ;COLDSTART FLAG (1=IN MIDDLE OF COLDSTART>
-RECLEN  = $0245         ;##1200xl## 1-byte relocating loader record length
-DSKTIM  = $0246         ;DISK TIME OUT REGISTER
-;LINBUF = $0247         ;##old## CHAR LINE BUFFER
-PDVMSK  = $0247         ;##rev2## 1-byte parallel device selection mask
-SHPDVS  = $0248         ;##rev2## 1-byte PDVS (parallel device select)
-PDIMSK  = $0249         ;##rev2## 1-byte parallel device IRQ selection
-RELADR  = $024A         ;##rev2## 2-byte relocating loader relative adr.
-PPTMPA  = $024C         ;##rev2## 1-byte parallel device handler temporary
-PPTMPX  = $024D         ;##rev2## 1-byte parallel device handler temporary
-
-CHSALT  = $026B         ;##1200xl## 1-byte character set alternate
-VSFLAG  = $026C         ;##1200xl## 1-byte fine vertical scroll count
-KEYDIS  = $026D         ;##1200xl## 1-byte keyboard disable
-FINE    = $026E         ;##1200xl## 1-byte fine scrolling mode
-GPRIOR  = $026F         ;GLOBAL PRIORITY CELL
-
-PADDL0  = $0270         ;1-byte potentiometer 0
-PADDL1  = $0271         ;1-byte potentiometer 1
-PADDL2  = $0272         ;1-byte potentiometer 2
-PADDL3  = $0273         ;1-byte potentiometer 3
-PADDL4  = $0274         ;1-byte potentiometer 4
-PADDL5  = $0275         ;1-byte potentiometer 5
-PADDL6  = $0276         ;1-byte potentiometer 6
-PADDL7  = $0277         ;1-byte potentiometer 7
-
-STICK0  = $0278         ;1-byte joystick 0
-STICK1  = $0279         ;1-byte joystick 1
-STICK2  = $027A         ;1-byte joystick 2
-STICK3  = $027B         ;1-byte joystick 3
-
-PTRIG0  = $027C         ;1-byte paddle trigger 0
-PTRIG1  = $027D         ;1-byte paddle trigger 1
-PTRIG2  = $027E         ;1-byte paddle trigger 2
-PTRIG3  = $027F         ;1-byte paddle trigger 3
-PTRIG4  = $0280         ;1-byte paddle trigger 4
-PTRIG5  = $0281         ;1-byte paddle trigger 5
-PTRIG6  = $0281         ;1-byte paddle trigger 6
-PTRIG7  = $0283         ;1-byte paddle trigger 7
-
-STRIG0  = $0284         ;1-byte joystick trigger 0
-STRIG1  = $0285         ;1-byte joystick trigger 1
-STRIG2  = $0286         ;1-byte joystick trigger 2
-STRIG3  = $0287         ;1-byte joystick trigger 3
-
-;CSTAT  = $0288         ;##old## cassette status register
-HIBYTE  = $0288         ;##1200xl## 1-byte relocating loader high byte
-WMODE   = $0289         ;1-byte cassette WRITE mode
-BLIM    = $028A         ;1-byte cassette buffer limit
-IMASK   = $028B         ;##rev2## (not used)
-JVECK   = $028C         ;2-byte jump vector or temporary
-NEWADR  = $028E         ;##1200xl## 2-byte relocating address
-TXTROW  = $0290         ;TEXT ROWCRS
-TXTCOL  = $0291         ;TEXT COLCRS
-TINDEX  = $0293         ;TEXT INDEX
-TXTMSC  = $0294         ;FOOLS CONVRT INTO NEW MSC
-TXTOLD  = $0296         ;OLDROW & OLDCOL FOR TEXT (AND THEN SOME)
-;TMPX1  = $029C         ;##old## 1-byte temporary register
-CRETRY  = $029C         ;##1200xl## 1-byte number of command frame retries
-HOLD3   = $029D         ;1-byte temporary
-SUBTMP  = $029E         ;1-byte temporary
-HOLD2   = $029F         ;1-byte (not used)
-DMASK   = $02A0         ;1-byte display (pixel location) mask
-TMPLBT  = $02A1         ;1-byte (not used)
-ESCFLG  = $02A2         ;ESCAPE FLAG
-TABMAP  = $02A3         ;15-byte (120 bit) tab stop bit map
-LOGMAP  = $02B2         ;LOGICAL LINE START BIT MAP
-INVFLG  = $02B6         ;INVERSE VIDEO FLAG (TOGGLED BY ATARI KEY)
-FILFLG  = $02B7         ;RIGHT FILL FLAG FOR DRAW
-TMPROW  = $02B8         ;1-byte temporary row
-TMPCOL  = $02B9         ;2-byte temporary column
-SCRFLG  = $02BB         ;SET IF SCROLL OCCURS
-HOLD4   = $02BC         ;TEMP CELL USED IN DRAW ONLY
-;HOLD5  = $02BD         ;##old## DITTO
-DRETRY  = $02BD         ;##1200xl## 1-byte number of device retries
-SHFLOK  = $02BE         ;1-byte shift/control lock flags
-BOTSCR  = $02BF         ;BOTTOM OF SCREEN   24 NORM 4 SPLIT
-
-PCOLR0  = $02C0         ;1-byte player-missile 0 color/luminance
-PCOLR1  = $02C1         ;1-byte player-missile 1 color/luminance
-PCOLR2  = $02C2         ;1-byte player-missile 2 color/luminance
-PCOLR3  = $02C3         ;1-byte player-missile 3 color/luminance
-
-COLOR0  = $02C4         ;1-byte playfield 0 color/luminance
-COLOR1  = $02C5         ;1-byte playfield 1 color/luminance
-COLOR2  = $02C6         ;1-byte playfield 2 color/luminance
-COLOR3  = $02C7         ;1-byte playfield 3 color/luminance
-
-COLOR4  = $02C8         ;1-byte background color/luminance
-
-PARMBL  = $02C9         ;##rev2## 6-byte relocating loader parameter
-RUNADR  = $02C9         ;##1200xl## 2-byte run address
-HIUSED  = $02CB         ;##1200xl## 2-byte highest non-zero page address
-ZHIUSE  = $02CD         ;##1200xl## 2-byte highest zero page address
-
-OLDPAR  = $02CF         ;##rev2## 6-byte relocating loader parameter
-GBYTEA  = $02CF         ;##1200xl## 2-byte GET-BYTE routine address
-LOADAD  = $02D1         ;##1200xl## 2-byte non-zero page load address
-ZLOADA  = $02D3         ;##1200xl## 2-byte zero page load address
-
-DSCTLN  = $02D5         ;##1200xl## 2-byte disk sector length
-ACMISR  = $02D7         ;##1200xl## 2-byte ACMI interrupt service routine
-KRPDEL  = $02D9         ;##1200xl## 1-byte auto-repeat delay
-KEYREP  = $02DA         ;##1200xl## 1-byte auto-repeat rate
-NOCLIK  = $02DB         ;##1200xl## 1-byte key click disable
-HELPFG  = $02DC         ;##1200xl## 1-byte HELP key flag (0 = no HELP)
-DMASAV  = $02DD         ;##1200xl## 1-byte SDMCTL save/restore
-PBPNT   = $02DE         ;##1200xl## 1-byte printer buffer pointer
-PBUFSZ  = $02DF         ;##1200xl## 1-byte printer buffer size
-
-GLBABS  = $02E0         ;4-byte global variables for non-DOS users
-RUNAD   = $02E0         ;##map## 2-byte binary file run address
-INITAD  = $02E2         ;##map## 2-byte binary file initialization address
-
-RAMSIZ  = $02E4         ;RAM SIZE (HI BYTE ONLY)
-MEMTOP  = $02E5         ;TOP OF AVAILABLE USER MEMORY
-MEMLO   = $02E7         ;BOTTOM OF AVAILABLE USER MEMORY
-HNDLOD  = $02E9         ;##1200xl## 1-byte user load flag
-DVSTAT  = $02EA         ;STATUS BUFFER
-CBAUDL  = $02EE         ;1-byte low cassette baud rate
-CBAUDH  = $02EF         ;1-byte high cassette baud rate
-CRSINH  = $02F0         ;CURSOR INHIBIT (00 = CURSOR ON)
-KEYDEL  = $02F1         ;KEY DELAY
-CH1     = $02F2         ;1-byte prior keyboard character
-CHACT   = $02F3         ;CHACTL REGISTER RAM
-CHBAS   = $02F4         ;CHBAS REGISTER RAM
-
-NEWROW  = $02F5         ;##1200xl## 1-byte draw destination row
-NEWCOL  = $02F6         ;##1200xl## 2-byte draw destination column
-ROWINC  = $02F8         ;##1200xl## 1-byte draw row increment
-COLINC  = $02F9         ;##1200xl## 1-byte draw column increment
-
-CHAR    = $02FA         ;1-byte internal character
-ATACHR  = $02FB         ;ATASCII CHARACTER
-CH      = $02FC         ;GLOBAL VARIABLE FOR KEYBOARD
-FILDAT  = $02FD         ;RIGHT FILL DATA <DRAW>
-DSPFLG  = $02FE         ;DISPLAY FLAG   DISPLAY CNTLS IF NON-ZERO
-SSFLAG  = $02FF         ;START/STOP FLAG FOR PAGING (CNTL 1). CLEARE
-
-;-------------------------------------------------------------------------
-; Page Three Address Equates
-;-------------------------------------------------------------------------
-
-DCB     = $0300         ;DEVICE CONTROL BLOCK
-DDEVIC  = $0300         ;PERIPHERAL UNIT 1 BUS I.D. NUMBER
-DUNIT   = $0301         ;UNIT NUMBER
-DCOMND  = $0302         ;BUS COMMAND
-DSTATS  = $0303         ;COMMAND TYPE/STATUS RETURN
-DBUFLO  = $0304         ;1-byte low data buffer address
-DBUFHI  = $0305         ;1-byte high data buffer address
-DTIMLO  = $0306         ;DEVICE TIME OUT IN 1 SECOND UNITS
-DUNUSE  = $0307         ;UNUSED BYTE
-DBYTLO  = $0308         ;1-byte low number of bytes to transfer
-DBYTHI  = $0309         ;1-byte high number of bytes to transfer
-DAUX1   = $030A         ;1-byte first command auxiliary
-DAUX2   = $030B         ;1-byte second command auxiliary
-
-TIMER1  = $030C         ;INITIAL TIMER VALUE
-;ADDCOR = $030E         ;##old## ADDITION CORRECTION
-JMPERS  = $030E         ;##1200xl## 1-byte jumper options
-CASFLG  = $030F         ;CASSETTE MODE WHEN SET
-TIMER2  = $0310         ;2-byte final baud rate timer value
-TEMP1   = $0312         ;TEMPORARY STORAGE REGISTER
-;TEMP2  = $0314         ;##old## TEMPORARY STORAGE REGISTER
-TEMP2   = $0313         ;##1200xl## 1-byte temporary 
-PTIMOT  = $0314         ;##1200xl## 1-byte printer timeout
-TEMP3   = $0315         ;TEMPORARY STORAGE REGISTER
-SAVIO   = $0316         ;SAVE SERIAL IN DATA PORT
-TIMFLG  = $0317         ;TIME OUT FLAG FOR BAUD RATE CORRECTION
-STACKP  = $0318         ;SIO STACK POINTER SAVE CELL
-TSTAT   = $0319         ;TEMPORARY STATUS HOLDER
-
-HATABS  = $031A         ;35-byte handler address table (was 38 bytes)
-PUPBT1  = $033D         ;##1200xl## 1-byte power-up validation byte 1
-PUPBT2  = $033E         ;##1200xl## 1-byte power-up validation byte 2
-PUPBT3  = $033F         ;##1200xl## 1-byte power-up validation byte 3
-
-IOCB    = $0340         ;I/O CONTROL BLOCKS
-ICHID   = $0340         ;HANDLER INDEX NUMBER (FF=IOCB FREE)
-ICDNO   = $0341         ;DEVICE NUMBER (DRIVE NUMBER)
-ICCOM   = $0342         ;COMMAND CODE
-ICSTA   = $0343         ;STATUS OF LAST IOCB ACTION
-ICBAL   = $0344         ;1-byte low buffer address
-ICBAH   = $0345         ;1-byte high buffer address
-ICPTL   = $0346         ;1-byte low PUT-BYTE routine address - 1
-ICPTH   = $0347         ;1-byte high PUT-BYTE routine address - 1
-ICBLL   = $0348         ;1-byte low buffer length
-ICBLH   = $0349         ;1-byte high buffer length
-ICAX1   = $034A         ;1-byte first auxiliary information
-ICAX2   = $034B         ;1-byte second auxiliary information
-ICAX3   = $034C         ;1-byte third auxiliary information
-ICAX4   = $034D         ;1-byte fourth auxiliary information
-ICAX5   = $034E         ;1-byte fifth auxiliary information
-ICSPR   = $034F         ;SPARE BYTE
-
-PRNBUF  = $03C0         ;PRINTER BUFFER
-SUPERF  = $03E8         ;##1200xl## 1-byte editor super function flag
-CKEY    = $03E9         ;##1200xl## 1-byte cassette boot request flag
-CASSBT  = $03EA         ;##1200xl## 1-byte cassette boot flag
-CARTCK  = $03EB         ;##1200xl## 1-byte cartridge equivalence check
-DERRF   = $03EC         ;##rev2## 1-byte screen OPEN error flag
-
-; Remainder of Page Three Not Cleared upon Reset
-
-ACMVAR  = $03ED         ;##1200xl## 11 bytes reserved for ACMI
-BASICF  = $03F8         ;##rev2## 1-byte BASIC switch flag
-MINTLK  = $03F9         ;##1200xl## 1-byte ACMI module interlock
-GINTLK  = $03FA         ;##1200xl## 1-byte cartridge interlock
-CHLINK  = $03FB         ;##1200xl## 2-byte loaded handler chain link
-CASBUF  = $03FD         ;CASSETTE BUFFER
-
-;-------------------------------------------------------------------------
-; Page Four/Five Address Equates
-;-------------------------------------------------------------------------
-
-; USER AREA STARTS HERE AND GOES TO END OF PAGE FIVE
-USAREA  = $0480         ;128 bytes reserved for application
-
-LBPR1   = $057E         ;LBUFF PREFIX 1
-LBPR2   = $057F         ;LBUFF PREFIX 2
-LBUFF   = $0580         ;128-byte line buffer
-
-PLYARG  = $05E0         ;6-byte floating point polynomial argument
-FPSCR   = $05E6         ;6-byte floating point temporary
-FPSCR1  = $05EC         ;6-byte floating point temporary
-
-;LBFEND = $05FF         ;##old## END OF LBUFF
-
-
-DOS     = $0700
-
-;-------------------------------------------------------------------------
-; Cartridge Address Equates
-;-------------------------------------------------------------------------
-
-CARTCS  = $BFFA         ;##rev2## 2-byte cartridge coldstart address
-CART    = $BFFC         ;##rev2## 1-byte cartridge present indicator
-CARTFG  = $BFFD         ;##rev2## 1-byte cartridge flags
-CARTAD  = $BFFE         ;##rev2## 2-byte cartridge start vector
-
-;-------------------------------------------------------------------------
-; CTIA/GTIA Address Equates
-;-------------------------------------------------------------------------
-
-GTIA    = $D000         ;CTIA/GTIA area
-
-; Read/Write Addresses
-
-CONSOL  = $D01F         ;console switches and speaker control
-
-; Read Addresses
-
-M0PF    = $D000         ;missile 0 and playfield collision
-M1PF    = $D001         ;missile 1 and playfield collision
-M2PF    = $D002         ;missile 2 and playfield collision
-M3PF    = $D003         ;missile 3 and playfield collision
-
-P0PF    = $D004         ;player 0 and playfield collision
-P1PF    = $D005         ;player 1 and playfield collision
-P2PF    = $D006         ;player 2 and playfield collision
-P3PF    = $D007         ;player 3 and playfield collision
-
-M0PL    = $D008         ;missile 0 and player collision
-M1PL    = $D009         ;missile 1 and player collision
-M2PL    = $D00A         ;missile 2 and player collision
-M3PL    = $D00B         ;missile 3 and player collision
-
-P0PL    = $D00C         ;player 0 and player collision
-P1PL    = $D00D         ;player 1 and player collision
-P2PL    = $D00E         ;player 2 and player collision
-P3PL    = $D00F         ;player 3 and player collision
-
-TRIG0   = $D010         ;joystick trigger 0
-TRIG1   = $D011         ;joystick trigger 1
-
-TRIG2   = $D012         ;cartridge interlock
-TRIG3   = $D013         ;ACMI module interlock
-
-PAL     = $D014         ;##rev2## PAL/NTSC indicator
-
-; Write Addresses
-
-HPOSP0  = $D000         ;player 0 horizontal position
-HPOSP1  = $D001         ;player 1 horizontal position
-HPOSP2  = $D002         ;player 2 horizontal position
-HPOSP3  = $D003         ;player 3 horizontal position
-
-HPOSM0  = $D004         ;missile 0 horizontal position
-HPOSM1  = $D005         ;missile 1 horizontal position
-HPOSM2  = $D006         ;missile 2 horizontal position
-HPOSM3  = $D007         ;missile 3 horizontal position
-
-SIZEP0  = $D008         ;player 0 size
-SIZEP1  = $D009         ;player 1 size
-SIZEP2  = $D00A         ;player 2 size
-SIZEP3  = $D00B         ;player 3 size
-
-SIZEM   = $D00C         ;missile sizes
-
-GRAFP0  = $D00D         ;player 0 graphics
-GRAFP1  = $D00E         ;player 1 graphics
-GRAFP2  = $D00F         ;player 2 graphics
-GRAFP3  = $D010         ;player 3 graphics
-
-GRAFM   = $D011         ;missile graphics
-
-COLPM0  = $D012         ;player-missile 0 color/luminance
-COLPM1  = $D013         ;player-missile 1 color/luminance
-COLPM2  = $D014         ;player-missile 2 color/luminance
-COLPM3  = $D015         ;player-missile 3 color/luminance
-
-COLPF0  = $D016         ;playfield 0 color/luminance
-COLPF1  = $D017         ;playfield 1 color/luminance
-COLPF2  = $D018         ;playfield 2 color/luminance
-COLPF3  = $D019         ;playfield 3 color/luminance
-
-COLBK   = $D01A         ;background color/luminance
-
-PRIOR   = $D01B         ;priority select
-VDELAY  = $D01C         ;vertical delay
-GRACTL  = $D01D         ;graphic control
-HITCLR  = $D01E         ;collision clear
-
-;-------------------------------------------------------------------------
-; PBI Address Equates
-;-------------------------------------------------------------------------
-
-PBI     = $D100         ;##rev2## parallel bus interface area
-
-; Read Addresses
-
-PDVI    = $D1FF         ;##rev2## parallel device IRQ status
-
-; Write Addresses
-
-PDVS    = $D1FF         ;##rev2## parallel device select
-
-; PBI RAM Address Equates
-
-PBIRAM  = $D600         ;##rev2## parallel bus interface RAM area
-
-; Parallel Device Address Equates
-
-PDID1   = $D803         ;##rev2## parallel device ID 1
-PDIDV   = $D805         ;##rev2## parallel device I/O vector
-PDIRQV  = $D808         ;##rev2## parallel device IRQ vector
-PDID2   = $D80B         ;##rev2## parallel device ID 2
-PDVV    = $D80D         ;##rev2## parallel device vector table
-
-;-------------------------------------------------------------------------
-; POKEY Address Equates
-;-------------------------------------------------------------------------
-
-POKEY   = $D200         ;POKEY area
-
-; Read Addresses
-
-POT0    = $D200         ;potentiometer 0
-POT1    = $D201         ;potentiometer 1
-POT2    = $D202         ;potentiometer 2
-POT3    = $D203         ;potentiometer 3
-POT4    = $D204         ;potentiometer 4
-POT5    = $D205         ;potentiometer 5
-POT6    = $D206         ;potentiometer 6
-POT7    = $D207         ;potentiometer 7
-
-ALLPOT  = $D208         ;potentiometer port status
-KBCODE  = $D209         ;keyboard code
-RANDOM  = $D20A         ;random number generator
-SERIN   = $D20D         ;serial port input
-IRQST   = $D20E         ;IRQ interrupt status
-SKSTAT  = $D20F         ;serial port and keyboard status
-
-; Write Addresses
-
-AUDF1   = $D200         ;channel 1 audio frequency
-AUDC1   = $D201         ;channel 1 audio control
-
-AUDF2   = $D202         ;channel 2 audio frequency
-AUDC2   = $D203         ;channel 2 audio control
-
-AUDF3   = $D204         ;channel 3 audio frequency
-AUDC3   = $D205         ;channel 3 audio control
-
-AUDF4   = $D206         ;channel 4 audio frequency
-AUDC4   = $D207         ;channel 4 audio control
-
-AUDCTL  = $D208         ;audio control
-STIMER  = $D209         ;start timers
-SKRES   = $D20A         ;reset SKSTAT status
-POTGO   = $D20B         ;start potentiometer scan sequence
-SEROUT  = $D20D         ;serial port output
-IRQEN   = $D20E         ;IRQ interrupt enable
-SKCTL   = $D20F         ;serial port and keyboard control
-
-;-------------------------------------------------------------------------
-; PIA Address Equates
-;-------------------------------------------------------------------------
-
-PIA     = $D300         ;PIA area
-
-PORTA   = $D300         ;port A direction register or jacks one/two
-PORTB   = $D301         ;port B direction register or memory management
-
-PACTL   = $D302         ;port A control
-PBCTL   = $D303         ;port B control
-
-;-------------------------------------------------------------------------
-; ANTIC Address Equates
-;-------------------------------------------------------------------------
-
-ANTIC   = $D400         ;ANTIC area
-
-; Read Addresses
-
-VCOUNT  = $D40B         ;vertical line counter
-PENH    = $D40C         ;light pen horizontal position
-PENV    = $D40D         ;light pen vertical position
-NMIST   = $D40F         ;NMI interrupt status
-
-; Write Addresses
-
-DMACTL  = $D400         ;DMA control
-CHACTL  = $D401         ;character control
-DLISTL  = $D402         ;low display list address
-DLISTH  = $D403         ;high display list address
-HSCROL  = $D404         ;horizontal scroll
-VSCROL  = $D405         ;vertical scroll
-PMBASE  = $D407         ;player-missile base address
-CHBASE  = $D409         ;character base address
-WSYNC   = $D40A         ;wait for HBLANK synchronization
-NMIEN   = $D40E         ;NMI enable
-NMIRES  = $D40F         ;NMI interrupt reset
-
-;-------------------------------------------------------------------------
-; Floating Point Package Address Equates
-;-------------------------------------------------------------------------
-
-AFP     = $D800         ;convert ASCII to floating point
-FASC    = $D8E6         ;convert floating point to ASCII
-IFP     = $D9AA         ;convert integer to floating point
-FPI     = $D9D2         ;convert floating point to integer
-ZFR0    = $DA44         ;zero FR0
-ZF1     = $DA46         ;zero floating point number
-FSUB    = $DA60         ;subtract floating point numbers
-FADD    = $DA66         ;add floating point numbers
-FMUL    = $DADB         ;multiply floating point numbers
-FDIV    = $DB28         ;divide floating point numbers
-PLYEVL  = $DD40         ;evaluate floating point polynomial
-FLD0R   = $DD89         ;load floating point number
-FLD0P   = $DD8D         ;load floating point number
-FLD1R   = $DD98         ;load floating point number
-PLD1P   = $DD9C         ;load floating point number
-FST0R   = $DDA7         ;store floating point number
-FST0P   = $DDAB         ;store floating point number
-FMOVE   = $DDB6         ;move floating point number
-LOG     = $DECD         ;calculate floating point logarithm
-LOG10   = $DED1         ;calculate floating point base 10 logarithm
-EXP     = $DDC0         ;calculate floating point exponential
-EXP10   = $DDCC         ;calculate floating point base 10 exponential
-
-;-------------------------------------------------------------------------
-; Device Handler Vector Table Address Equates
-;-------------------------------------------------------------------------
-
-EDITRV  = $E400         ;editor handler vector table
-SCRENV  = $E410         ;screen handler vector table
-KEYBDV  = $E420         ;keyboard handler vector table
-PRINTV  = $E430         ;printer handler vector table
-CASETV  = $E440         ;cassette handler vector table
-
-;-------------------------------------------------------------------------
-; Jump Vector Address Equates
-;-------------------------------------------------------------------------
-
-DISKIV  = $E450         ;vector to initialize DIO
-DSKINV  = $E453         ;vector to DIO
-CIOV    = $E456         ;vector to CIO
-SIOV    = $E459         ;vector to SIO
-SETVBV  = $E45C         ;vector to set VBLANK parameters
-SYSVBV  = $E45F         ;vector to process immediate VBLANK
-XITVBV  = $E462         ;vector to process deferred VBLANK
-SIOINV  = $E465         ;vector to initialize SIO
-SENDEV  = $E468         ;vector to enable SEND
-INTINV  = $E46B         ;vector to initialize interrupt handler
-CIOINV  = $E46E         ;vector to initialize CIO
-BLKBDV  = $E471         ;vector to power-up display
-WARMSV  = $E474         ;vector to warmstart
-COLDSV  = $E477         ;vector to coldstart
-RBLOKV  = $E47A         ;vector to read cassette block
-CSOPIV  = $E47D         ;vector to open cassette for input
-VCTABL  = $E480         ;RAM vector initial value table
-PUPDIV  = $E480         ;##rev2## vector to power-up display
-SLFTSV  = $E483         ;##rev2## vector to self-test
-PHENTV  = $E486         ;##rev2## vector to enter peripheral handler
-PHUNLV  = $E489         ;##rev2## vector to unlink peripheral handler
-PHINIV  = $E48C         ;##rev2## vector to initialize peripheral handler
-GPDVV   = $E48F         ;##rev2## generic parallel device handler vector
-
-; NOTE: OS rom self-test labels are not included in this file
-
-;-------------------------------------------------------------------------
-; Some misc. stuff from the 400/800 rev.B source
-;-------------------------------------------------------------------------
-
-; THE FOLLOWING ARE IN BASIC CARTRIDGE:
-SIN     = $BD81         ;FR0 <- SIN (FR0) DEGFLG (0=RAD,6=DEG) CARRY
-COS     = $BD73         ;FR0 <- COS (FR0) CARRY
-ATAN    = $BE43         ;FR0 <- ATAN(FR0) CARRY
-SQR     = $BEB1         ;FR0 <- ROOT(FR0) CARRY
-
-RADON   = 0             ;INDICATES RADIANS
-DEGON   = 6             ;INDICATES DEGREES
-
-ASCZER  = '0'           ;ASCII ZERO
-COLON   = $3A           ;ASCII COLON 
-CR      = $9B           ;SYSTEM EOL (CARRIAGE RETURN)
-
-;-------------------------------------------------------------------------
-; 6502
-;-------------------------------------------------------------------------
-
-NMIVEC  = $FFFA
-RESVEC  = $FFFC
-IRQVEC  = $FFFE
-
-;-------------------------------------------------------------------------
-; BASIC
-;-------------------------------------------------------------------------
-
-LOMEM   = $80           ;2-byte low memory pointer
-VNTP    = $82           ;2-byte variable name table address
-VNTD    = $84           ;2-byte variable name table end + 1
-VVTP    = $86           ;2-byte variable value table
-STMTAB  = $88           ;2-byte statement table address
-STMCUR  = $8A           ;2-byte current statement pointer
-STARP   = $8C           ;2-byte string and array table pointer
-RUNSTK  = $8E           ;2-byte runtime stack address
-BMEMTOP = $90           ;2-byte top of memory pointer
-STOPLN  = $BA           ;2-byte stopped line number
-ERRSAVE = $C3           ;1-byte error code
-PTABW   = $C9           ;1-byte tab width
-
-;-------------------------------------------------------------------------
-; ATASCII CHARACTER DEFS
-;-------------------------------------------------------------------------
-
-ATCLR   = $7D           ;CLEAR SCREEN CHARACTER
-ATRUB   = $7E           ;BACK SPACE (RUBOUT)
-ATTAB   = $7F           ;TAB
-ATEOL   = $9B           ;END-OF-LINE
-ATDELL  = $9C           ;delete line
-ATINSL  = $9D           ;insert line
-ATCTAB  = $9E           ;clear TAB
-ATSTAB  = $9F           ;set TAB
-ATBEL   = $FD           ;CONSOLE BELL
-ATDEL   = $FE           ;delete char.
-ATINS   = $FF           ;insert char.
-ATURW   = $1C           ;UP-ARROW
-ATDRW   = $1D           ;DOWN-ARROW
-ATLRW   = $1E           ;LEFT-ARROW
-ATRRW   = $1F           ;RIGHT-ARROW
-ATESC   = $1B           ;ESCAPE
-
-;-------------------------------------------------------------------------
-; OFFSETS INTO SECTSIZETAB (DIO functions)
-;-------------------------------------------------------------------------
-
-sst_flag     = 0        ; length 1
-sst_sectsize = 1        ;        2
-sst_driveno  = 3        ;        1  (drive #)
-sst_size     = 4        ; size of one entry
-                        ; if changed, adapt diopncls.s
-
-;-------------------------------------------------------------------------
-; OFFSETS INTO dio_phys_pos
-;-------------------------------------------------------------------------
-
-diopp_head   = 0        ; head
-diopp_track  = 1        ; track / cylinder
-diopp_sector = 3        ; sector
-diopp_size   = 5        ; size of structure
-
-;-------------------------------------------------------------------------
-; VALUES for dos_type
-;-------------------------------------------------------------------------
-
-ATARIDOS     = 0
-SPARTADOS    = 1
-OSADOS       = 2        ; OS/A+
-MYDOS        = 3
-XDOS         = 4
-NODOS        = 255
-
-;-------------------------------------------------------------------------
-; Antic opcodes
-;-------------------------------------------------------------------------
-
-; usage example:
-;
-; ScreenDL:
-; .byte DL_BLK8
-; .byte DL_BLK8
-; .byte DL_CHR40x8x1 + DL_LMS + DL_DLI
-; .word ScreenAlignment
-; .byte DL_BLK1 + DL_DLI
-; .byte DL_MAP320x1x1 + DL_LMS
-; .word Screen
-;
-; .repeat 99
-; .byte DL_MAP320x1x1
-; .endrepeat
-; .byte DL_MAP320x1x1 + DL_LMS
-; .word Screen + 40 * 100       ; 100 lines a 40 byte, 'Screen' has to be aligned correctly!
-; .repeat 92
-; .byte DL_MAP320x1x1
-; .endrepeat
-;
-; .byte DL_JVB
-
-; absolute instructions (non mode lines)
-
-DL_JMP  = 1
-DL_JVB  = 65
-
-DL_BLK1  = 0
-DL_BLK2  = 16
-DL_BLK3  = 32
-DL_BLK4  = 48
-DL_BLK5  = 64
-DL_BLK6  = 80
-DL_BLK7  = 96
-DL_BLK8  = 112
-
-; absolute instructions (mode lines)
-
-DL_CHR40x8x1  = 2               ; monochrome, 40 character & 8 scanlines per mode line (GR. 0)
-DL_CHR40x10x1 = 3               ; monochrome, 40 character & 10 scanlines per mode line
-DL_CHR40x8x4  = 4               ; colour, 40 character & 8 scanlines per mode line (GR. 12)
-DL_CHR40x16x4 = 5               ; colour, 40 character & 16 scanlines per mode line (GR. 13)
-DL_CHR20x8x2  = 6               ; colour (duochrome per character), 20 character & 8 scanlines per mode line (GR. 1)
-DL_CHR20x16x2 = 7               ; colour (duochrome per character), 20 character & 16 scanlines per mode line (GR. 2)
-
-DL_MAP40x8x4  = 8               ; colour, 40 pixel & 8 scanlines per mode line (GR. 3)
-DL_MAP80x4x2  = 9               ; 'duochrome', 80 pixel & 4 scanlines per mode line (GR.4) 
-DL_MAP80x4x4  = 10              ; colour, 80 pixel & 4 scanlines per mode line (GR.5) 
-DL_MAP160x2x2 = 11              ; 'duochrome', 160 pixel & 2 scanlines per mode line (GR.6) 
-DL_MAP160x1x2 = 12              ; 'duochrome', 160 pixel & 1 scanline per mode line (GR.14) 
-DL_MAP160x2x4 = 13              ; 4 colours, 160 pixel & 2 scanlines per mode line (GR.7) 
-DL_MAP160x1x4 = 14              ; 4 colours, 160 pixel & 1 scanline per mode line (GR.15) 
-DL_MAP320x1x1 = 15              ; monochrome, 320 pixel & 1 scanline per mode line (GR.8) 
-
-; modifiers on mode lines...
-
-DL_HSCROL = 16
-DL_VSCROL = 32
-DL_LMS    = 64
-
-; general modifier...
-
-DL_DLI    = 128
-
-;-------------------------------------------------------------------------
-; End of atari.inc
-;-------------------------------------------------------------------------