bundler 1.17.3 → 2.6.3

data/man/gemfile.5.txt

@@ -1,653 +0,0 @@
-GEMFILE(5)							    GEMFILE(5)
-
-
-
-NAME
-       Gemfile - A format for describing gem dependencies for Ruby programs
-
-SYNOPSIS
-       A Gemfile describes the gem dependencies required to execute associated
-       Ruby code.
-
-       Place the Gemfile in the root of the directory containing  the  associ-
-       ated  code.  For instance, in a Rails application, place the Gemfile in
-       the same directory as the Rakefile.
-
-SYNTAX
-       A Gemfile is evaluated as Ruby code, in a context which makes available
-       a number of methods used to describe the gem requirements.
-
-GLOBAL SOURCES
-       At the top of the Gemfile, add a line for the Rubygems source that con-
-       tains the gems listed in the Gemfile.
-
-
-
-	   source "https://rubygems.org"
-
-
-
-       It is possible, but not recommended as of Bundler 1.7, to add  multiple
-       global  source  lines.  Each  of these sources MUST be a valid Rubygems
-       repository.
-
-       Sources are checked for gems  following	the  heuristics  described  in
-       SOURCE  PRIORITY.  If  a  gem  is found in more than one global source,
-       Bundler will print a warning after installing the gem indicating  which
-       source  was used, and listing the other sources where the gem is avail-
-       able. A specific source can be selected for gems that  need  to	use  a
-       non-standard repository, suppressing this warning, by using the :source
-       option or a source block.
-
-   CREDENTIALS
-       Some gem sources require a username and password. Use bundle  config(1)
-       bundle-config.1.html  to  set  the username and password for any of the
-       sources that need it. The command must be run  once  on	each  computer
-       that  will  install  the  Gemfile,  but this keeps the credentials from
-       being stored in plain text in version control.
-
-
-
-	   bundle config gems.example.com user:password
-
-
-
-       For some sources, like a company Gemfury account, it may be  easier  to
-       include the credentials in the Gemfile as part of the source URL.
-
-
-
-	   source "https://user:password@gems.example.com"
-
-
-
-       Credentials in the source URL will take precedence over credentials set
-       using config.
-
-RUBY
-       If your application requires a specific Ruby version or engine, specify
-       your  requirements using the ruby method, with the following arguments.
-       All parameters are OPTIONAL unless otherwise specified.
-
-   VERSION (required)
-       The version of Ruby that your application requires. If your application
-       requires  an  alternate	Ruby  engine, such as JRuby, Rubinius or Truf-
-       fleRuby, this should be the Ruby version that the engine is  compatible
-       with.
-
-
-
-	   ruby "1.9.3"
-
-
-
-   ENGINE
-       Each  application may specify a Ruby engine. If an engine is specified,
-       an engine version must also be specified.
-
-       What exactly is an Engine? - A Ruby engine is an implementation of  the
-       Ruby language.
-
-       o   For	background:  the  reference  or original implementation of the
-	   Ruby  programming  language	is  called  Matz's  Ruby   Interpreter
-	   https://en.wikipedia.org/wiki/Ruby_MRI,  or	MRI for short. This is
-	   named after Ruby creator Yukihiro Matsumoto, also  known  as  Matz.
-	   MRI	is also known as CRuby, because it is written in C. MRI is the
-	   most widely used Ruby engine.
-
-       o   Other implementations https://www.ruby-lang.org/en/about/  of  Ruby
-	   exist. Some of the more well-known implementations include Rubinius
-	   https://rubinius.com/, and JRuby http://jruby.org/. Rubinius is  an
-	   alternative	implementation	of  Ruby  written in Ruby. JRuby is an
-	   implementation of Ruby on the JVM, short for Java Virtual  Machine.
-
-
-
-   ENGINE VERSION
-       Each  application  may specify a Ruby engine version. If an engine ver-
-       sion is specified, an engine must also be specified. If the  engine  is
-       "ruby" the engine version specified must match the Ruby version.
-
-
-
-	   ruby "1.8.7", :engine => "jruby", :engine_version => "1.6.7"
-
-
-
-   PATCHLEVEL
-       Each application may specify a Ruby patchlevel.
-
-
-
-	   ruby "2.0.0", :patchlevel => "247"
-
-
-
-GEMS
-       Specify gem requirements using the gem method, with the following argu-
-       ments. All parameters are OPTIONAL unless otherwise specified.
-
-   NAME (required)
-       For each gem requirement, list a single gem line.
-
-
-
-	   gem "nokogiri"
-
-
-
-   VERSION
-       Each gem MAY have one or more version specifiers.
-
-
-
-	   gem "nokogiri", ">= 1.4.2"
-	   gem "RedCloth", ">= 4.1.0", "< 4.2.0"
-
-
-
-   REQUIRE AS
-       Each gem MAY specify files that should be used when  autorequiring  via
-       Bundler.require.  You  may pass an array with multiple files or true if
-       file you want required has same name as gem or  false  to  prevent  any
-       file from being autorequired.
-
-
-
-	   gem "redis", :require => ["redis/connection/hiredis", "redis"]
-	   gem "webmock", :require => false
-	   gem "debugger", :require => true
-
-
-
-       The  argument  defaults	to the name of the gem. For example, these are
-       identical:
-
-
-
-	   gem "nokogiri"
-	   gem "nokogiri", :require => "nokogiri"
-	   gem "nokogiri", :require => true
-
-
-
-   GROUPS
-       Each gem MAY specify membership in one or more  groups.	Any  gem  that
-       does  not  specify  membership  in  any	group is placed in the default
-       group.
-
-
-
-	   gem "rspec", :group => :test
-	   gem "wirble", :groups => [:development, :test]
-
-
-
-       The Bundler runtime allows its  two  main  methods,  Bundler.setup  and
-       Bundler.require, to limit their impact to particular groups.
-
-
-
-	   # setup adds gems to Ruby's load path
-	   Bundler.setup		    # defaults to all groups
-	   require "bundler/setup"	    # same as Bundler.setup
-	   Bundler.setup(:default)	    # only set up the _default_ group
-	   Bundler.setup(:test) 	    # only set up the _test_ group (but `not` _default_)
-	   Bundler.setup(:default, :test)   # set up the _default_ and _test_ groups, but no others
-
-	   # require requires all of the gems in the specified groups
-	   Bundler.require		    # defaults to the _default_ group
-	   Bundler.require(:default)	    # identical
-	   Bundler.require(:default, :test) # requires the _default_ and _test_ groups
-	   Bundler.require(:test)	    # requires the _test_ group
-
-
-
-       The  Bundler CLI allows you to specify a list of groups whose gems bun-
-       dle install should not install with the --without  option.  To  specify
-       multiple  groups  to ignore, specify a list of groups separated by spa-
-       ces.
-
-
-
-	   bundle install --without test
-	   bundle install --without development test
-
-
-
-       After running bundle install --without test, bundler will remember that
-       you excluded the test group in the last installation. The next time you
-       run bundle install, without any --without option, bundler  will	recall
-       it.
-
-       Also,  calling  Bundler.setup  with  no	parameters, or calling require
-       "bundler/setup" will setup all groups except for the ones you  excluded
-       via --without (since they are not available).
-
-       Note  that on bundle install, bundler downloads and evaluates all gems,
-       in order to create a single canonical list of all of the required  gems
-       and  their dependencies. This means that you cannot list different ver-
-       sions of the same gems in  different  groups.  For  more  details,  see
-       Understanding Bundler http://bundler.io/rationale.html.
-
-   PLATFORMS
-       If  a  gem should only be used in a particular platform or set of plat-
-       forms, you can specify them. Platforms  are  essentially  identical  to
-       groups,	except	that you do not need to use the --without install-time
-       flag to exclude groups of gems for other platforms.
-
-       There are a number of Gemfile platforms:
-
-       ruby   C Ruby (MRI), Rubinius or TruffleRuby, but NOT Windows
-
-       mri    Same as ruby, but only C Ruby (MRI)
-
-       mingw  Windows 32 bit 'mingw32' platform (aka RubyInstaller)
-
-       x64_mingw
-	      Windows 64 bit 'mingw32' platform (aka RubyInstaller x64)
-
-       rbx    Rubinius
-
-       jruby  JRuby
-
-       truffleruby
-	      TruffleRuby
-
-       mswin  Windows
-
-       You can restrict further by platform  and  version  for	all  platforms
-       except for rbx, jruby, truffleruby and mswin.
-
-       To specify a version in addition to a platform, append the version num-
-       ber without the delimiter to the platform. For example, to specify that
-       a gem should only be used on platforms with Ruby 2.3, use:
-
-
-
-	   ruby_23
-
-
-
-       The full list of platforms and supported versions includes:
-
-       ruby   1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5
-
-       mri    1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5
-
-       mingw  1.8, 1.9, 2.0, 2.1, 2.2, 2.3, 2.4, 2.5
-
-       x64_mingw
-	      2.0, 2.1, 2.2, 2.3, 2.4, 2.5
-
-       As with groups, you can specify one or more platforms:
-
-
-
-	   gem "weakling",   :platforms => :jruby
-	   gem "ruby-debug", :platforms => :mri_18
-	   gem "nokogiri",   :platforms => [:mri_18, :jruby]
-
-
-
-       All  operations involving groups (bundle install bundle-install.1.html,
-       Bundler.setup, Bundler.require) behave  exactly	the  same  as  if  any
-       groups not matching the current platform were explicitly excluded.
-
-   SOURCE
-       You  can  select  an  alternate Rubygems repository for a gem using the
-       ':source' option.
-
-
-
-	   gem "some_internal_gem", :source => "https://gems.example.com"
-
-
-
-       This forces the gem to be loaded  from  this  source  and  ignores  any
-       global  sources	declared at the top level of the file. If the gem does
-       not exist in this source, it will not be installed.
-
-       Bundler will search for child dependencies of this gem by first looking
-       in the source selected for the parent, but if they are not found there,
-       it will fall back on global sources using  the  ordering  described  in
-       SOURCE PRIORITY.
-
-       Selecting  a  specific  source  repository this way also suppresses the
-       ambiguous gem warning described above in GLOBAL SOURCES (#source).
-
-       Using the :source option for an individual  gem	will  also  make  that
-       source  available  as a possible global source for any other gems which
-       do not specify explicit sources. Thus, when adding gems	with  explicit
-       sources,  it  is recommended that you also ensure all other gems in the
-       Gemfile are using explicit sources.
-
-   GIT
-       If necessary, you can specify that a gem is located at a particular git
-       repository using the :git parameter. The repository can be accessed via
-       several protocols:
-
-       HTTP(S)
-	      gem "rails", :git => "https://github.com/rails/rails.git"
-
-       SSH    gem "rails", :git => "git@github.com:rails/rails.git"
-
-       git    gem "rails", :git => "git://github.com/rails/rails.git"
-
-       If using SSH, the user that you use to run bundle install MUST have the
-       appropriate keys available in their $HOME/.ssh.
-
-       NOTE:  http://  and  git://  URLs should be avoided if at all possible.
-       These protocols are unauthenticated, so	a  man-in-the-middle  attacker
-       can  deliver  malicious	code and compromise your system. HTTPS and SSH
-       are strongly preferred.
-
-       The group, platforms, and require  options  are	available  and	behave
-       exactly the same as they would for a normal gem.
-
-       A  git  repository  SHOULD  have  at least one file, at the root of the
-       directory containing the gem, with the extension  .gemspec.  This  file
-       MUST  contain  a  valid gem specification, as expected by the gem build
-       command.
-
-       If a git repository does not have a .gemspec, bundler will  attempt  to
-       create one, but it will not contain any dependencies, executables, or C
-       extension compilation instructions. As a result, it may fail  to  prop-
-       erly integrate into your application.
-
-       If  a  git  repository does have a .gemspec for the gem you attached it
-       to, a version specifier, if provided, means that the git repository  is
-       only  valid  if	the  .gemspec specifies a version matching the version
-       specifier. If not, bundler will print a warning.
-
-
-
-	   gem "rails", "2.3.8", :git => "https://github.com/rails/rails.git"
-	   # bundle install will fail, because the .gemspec in the rails
-	   # repository's master branch specifies version 3.0.0
-
-
-
-       If a git repository does not have a .gemspec for the gem  you  attached
-       it to, a version specifier MUST be provided. Bundler will use this ver-
-       sion in the simple .gemspec it creates.
-
-       Git repositories support a number of additional options.
-
-       branch, tag, and ref
-	      You MUST only specify at most one of these options. The  default
-	      is :branch => "master"
-
-       For example:
-
-	      git  "https://github.com/rails/rails.git",  :branch => "5-0-sta-
-	      ble" do
-
-	      git "https://github.com/rails/rails.git", :tag => "v5.0.0" do
-
-	      git "https://github.com/rails/rails.git", :ref => "4aded" do
-
-       submodules
-	      For	  reference,	     a		git	     submodule
-	      https://git-scm.com/book/en/v2/Git-Tools-Submodules   lets   you
-	      have another git repository within a subfolder of  your  reposi-
-	      tory. Specify :submodules => true to cause bundler to expand any
-	      submodules included in the git repository
-
-       If a git repository contains multiple .gemspecs, each  .gemspec	repre-
-       sents  a  gem located at the same place in the file system as the .gem-
-       spec.
-
-
-
-	   |~rails		     [git root]
-	   | |-rails.gemspec	     [rails gem located here]
-	   |~actionpack
-	   | |-actionpack.gemspec    [actionpack gem located here]
-	   |~activesupport
-	   | |-activesupport.gemspec [activesupport gem located here]
-	   |...
-
-
-
-       To install a gem located in a git repository, bundler  changes  to  the
-       directory  containing the gemspec, runs gem build name.gemspec and then
-       installs the resulting gem. The gem build command, which comes standard
-       with  Rubygems,	evaluates the .gemspec in the context of the directory
-       in which it is located.
-
-   GIT SOURCE
-       A custom git source can be defined via the git_source  method.  Provide
-       the  source's  name as an argument, and a block which receives a single
-       argument and interpolates it into a string  to  return  the  full  repo
-       address:
-
-
-
-	   git_source(:stash){ |repo_name| "https://stash.corp.acme.pl/#{repo_name}.git" }
-	   gem 'rails', :stash => 'forks/rails'
-
-
-
-       In addition, if you wish to choose a specific branch:
-
-
-
-	   gem "rails", :stash => "forks/rails", :branch => "branch_name"
-
-
-
-   GITHUB
-       NOTE: This shorthand should be avoided until Bundler 2.0, since it cur-
-       rently expands to an insecure git:// URL. This allows a man-in-the-mid-
-       dle attacker to compromise your system.
-
-       If  the	git repository you want to use is hosted on GitHub and is pub-
-       lic, you can use the :github shorthand to specify the  github  username
-       and  repository	name  (without	the  trailing  ".git"), separated by a
-       slash. If both the username and repository name are the same,  you  can
-       omit one.
-
-
-
-	   gem "rails", :github => "rails/rails"
-	   gem "rails", :github => "rails"
-
-
-
-       Are both equivalent to
-
-
-
-	   gem "rails", :git => "git://github.com/rails/rails.git"
-
-
-
-       Since the github method is a specialization of git_source, it accepts a
-       :branch named argument.
-
-   GIST
-       If the git repository you want to use is hosted as a Github Gist and is
-       public,	you can use the :gist shorthand to specify the gist identifier
-       (without the trailing ".git").
-
-
-
-	   gem "the_hatch", :gist => "4815162342"
-
-
-
-       Is equivalent to:
-
-
-
-	   gem "the_hatch", :git => "https://gist.github.com/4815162342.git"
-
-
-
-       Since the gist method is a specialization of git_source, it  accepts  a
-       :branch named argument.
-
-   BITBUCKET
-       If  the	git  repository  you want to use is hosted on Bitbucket and is
-       public, you can use the :bitbucket shorthand to specify	the  bitbucket
-       username  and  repository name (without the trailing ".git"), separated
-       by a slash. If both the username and repository name are the same,  you
-       can omit one.
-
-
-
-	   gem "rails", :bitbucket => "rails/rails"
-	   gem "rails", :bitbucket => "rails"
-
-
-
-       Are both equivalent to
-
-
-
-	   gem "rails", :git => "https://rails@bitbucket.org/rails/rails.git"
-
-
-
-       Since  the  bitbucket  method  is  a  specialization  of git_source, it
-       accepts a :branch named argument.
-
-   PATH
-       You can specify that a gem is located in a particular location  on  the
-       file system. Relative paths are resolved relative to the directory con-
-       taining the Gemfile.
-
-       Similar to the semantics of the :git option, the :path option  requires
-       that  the directory in question either contains a .gemspec for the gem,
-       or that you specify an explicit version that bundler should use.
-
-       Unlike :git, bundler does not compile C extensions for  gems  specified
-       as paths.
-
-
-
-	   gem "rails", :path => "vendor/rails"
-
-
-
-       If you would like to use multiple local gems directly from the filesys-
-       tem, you can set a global path option to the path containing the  gem's
-       files.  This will automatically load gemspec files from subdirectories.
-
-
-
-	   path 'components' do
-	     gem 'admin_ui'
-	     gem 'public_ui'
-	   end
-
-
-
-BLOCK FORM OF SOURCE, GIT, PATH, GROUP and PLATFORMS
-       The :source, :git, :path, :group, and :platforms options may be applied
-       to a group of gems by using block form.
-
-
-
-	   source "https://gems.example.com" do
-	     gem "some_internal_gem"
-	     gem "another_internal_gem"
-	   end
-
-	   git "https://github.com/rails/rails.git" do
-	     gem "activesupport"
-	     gem "actionpack"
-	   end
-
-	   platforms :ruby do
-	     gem "ruby-debug"
-	     gem "sqlite3"
-	   end
-
-	   group :development, :optional => true do
-	     gem "wirble"
-	     gem "faker"
-	   end
-
-
-
-       In  the	case of the group block form the :optional option can be given
-       to prevent a group from being installed unless  listed  in  the	--with
-       option given to the bundle install command.
-
-       In  the	case of the git block form, the :ref, :branch, :tag, and :sub-
-       modules options may be passed to the git method, and all  gems  in  the
-       block will inherit those options.
-
-       The  presence  of  a  source  block in a Gemfile also makes that source
-       available as a possible global source for any other gems which  do  not
-       specify explicit sources. Thus, when defining source blocks, it is rec-
-       ommended that you also ensure all other gems in the Gemfile  are  using
-       explicit  sources,  either  via	source blocks or :source directives on
-       individual gems.
-
-INSTALL_IF
-       The install_if method allows gems to be installed based on  a  proc  or
-       lambda.	This  is  especially useful for optional gems that can only be
-       used if certain software is installed or some other conditions are met.
-
-
-
-	   install_if -> { RUBY_PLATFORM =~ /darwin/ } do
-	     gem "pasteboard"
-	   end
-
-
-
-GEMSPEC
-       The  .gemspec  http://guides.rubygems.org/specification-reference/ file
-       is where you provide metadata about your gem to Rubygems. Some required
-       Gemspec	attributes include the name, description, and homepage of your
-       gem. This is also where you specify the dependencies your gem needs  to
-       run.
-
-       If you wish to use Bundler to help install dependencies for a gem while
-       it is being developed, use the gemspec method to pull in the  dependen-
-       cies listed in the .gemspec file.
-
-       The gemspec method adds any runtime dependencies as gem requirements in
-       the default  group.  It	also  adds  development  dependencies  as  gem
-       requirements  in the development group. Finally, it adds a gem require-
-       ment on your project (:path => '.'). In conjunction with Bundler.setup,
-       this allows you to require project files in your test code as you would
-       if the project were installed as a gem; you  need  not  manipulate  the
-       load path manually or require project files via relative paths.
-
-       The gemspec method supports optional :path, :glob, :name, and :develop-
-       ment_group options, which control where bundler looks for the .gemspec,
-       the  glob  it  uses  to look for the gemspec (defaults to: "{,,/*}.gem-
-       spec"), what named .gemspec it uses (if more than one is present),  and
-       which group development dependencies are included in.
-
-       When  a	gemspec dependency encounters version conflicts during resolu-
-       tion, the local version under development will always  be  selected  --
-       even  if there are remote versions that better match other requirements
-       for the gemspec gem.
-
-SOURCE PRIORITY
-       When attempting to locate a gem to satisfy a gem  requirement,  bundler
-       uses the following priority order:
-
-       1.  The source explicitly attached to the gem (using :source, :path, or
-	   :git)
-
-       2.  For implicit gems (dependencies of explicit gems), any source, git,
-	   or  path repository declared on the parent. This results in bundler
-	   prioritizing the ActiveSupport gem from the	Rails  git  repository
-	   over ones from rubygems.org
-
-       3.  The	sources  specified  via  global  source  lines, searching each
-	   source in your Gemfile from last added to first added.
-
-
-
-
-
-
-				 November 2018			    GEMFILE(5)