bundler 1.17.3 → 2.6.3

data/man/bundle-install.1.txt

@@ -1,396 +0,0 @@
-BUNDLE-INSTALL(1)					     BUNDLE-INSTALL(1)
-
-
-
-NAME
-       bundle-install - Install the dependencies specified in your Gemfile
-
-SYNOPSIS
-       bundle	install   [--binstubs[=DIRECTORY]]   [--clean]	[--deployment]
-       [--force] [--frozen] [--full-index] [--gemfile=GEMFILE] [--jobs=NUMBER]
-       [--local]    [--no-cache]    [--no-prune]   [--path   PATH]   [--quiet]
-       [--retry=NUMBER] [--shebang] [--standalone[=GROUP[ GROUP...]]]  [--sys-
-       tem]   [--trust-policy=POLICY]	[--with=GROUP[	 GROUP...]]   [--with-
-       out=GROUP[ GROUP...]]
-
-DESCRIPTION
-       Install the gems specified in your Gemfile(5). If  this	is  the  first
-       time  you  run  bundle  install	(and  a  Gemfile.lock does not exist),
-       Bundler will fetch all remote sources, resolve dependencies and install
-       all needed gems.
-
-       If a Gemfile.lock does exist, and you have not updated your Gemfile(5),
-       Bundler will fetch all remote sources, but use the dependencies	speci-
-       fied in the Gemfile.lock instead of resolving dependencies.
-
-       If  a  Gemfile.lock  does  exist, and you have updated your Gemfile(5),
-       Bundler will use the dependencies in the Gemfile.lock for all gems that
-       you  did  not update, but will re-resolve the dependencies of gems that
-       you did update. You can find more information about this update process
-       below under CONSERVATIVE UPDATING.
-
-OPTIONS
-       To  apply  any  of --binstubs, --deployment, --path, or --without every
-       time bundle install is run, use bundle config (see bundle-config(1)).
-
-       --binstubs[=<directory>]
-	      Creates a directory (defaults to ~/bin) and place  any  executa-
-	      bles from the gem there. These executables run in Bundler's con-
-	      text. If used, you might add this  directory  to	your  environ-
-	      ment's  PATH variable. For instance, if the rails gem comes with
-	      a rails executable, this flag will create a bin/rails executable
-	      that  ensures  that  all	referred dependencies will be resolved
-	      using the bundled gems.
-
-       --clean
-	      On finishing the installation Bundler is	going  to  remove  any
-	      gems  not  present  in the current Gemfile(5). Don't worry, gems
-	      currently in use will not be removed.
-
-       --deployment
-	      In deployment mode, Bundler will 'roll-out' the bundle for  pro-
-	      duction  or  CI  use. Please check carefully if you want to have
-	      this option enabled in your development environment.
-
-       --force
-	      Force download every gem, even  if  the  required  versions  are
-	      already  available  locally.  --redownload  is  an alias of this
-	      option.
-
-       --frozen
-	      Do not allow the Gemfile.lock to be updated after this  install.
-	      Exits  non-zero  if  there  are  going to be changes to the Gem-
-	      file.lock.
-
-       --full-index
-	      Bundler will not call Rubygems' API endpoint (default) but down-
-	      load and cache a (currently big) index file of all gems. Perfor-
-	      mance can be improved for large bundles that  seldom  change  by
-	      enabling this option.
-
-       --gemfile=<gemfile>
-	      The  location  of  the Gemfile(5) which Bundler should use. This
-	      defaults to a Gemfile(5) in the current  working	directory.  In
-	      general, Bundler will assume that the location of the Gemfile(5)
-	      is also the project's root and will try to find Gemfile.lock and
-	      vendor/cache relative to this location.
-
-       --jobs=[<number>], -j[<number>]
-	      The  maximum  number  of parallel download and install jobs. The
-	      default is 1.
-
-       --local
-	      Do not attempt to connect to rubygems.org. Instead, Bundler will
-	      use  the	gems  already  present	in  Rubygems' cache or in ven-
-	      dor/cache. Note that  if	a  appropriate	platform-specific  gem
-	      exists on rubygems.org it will not be found.
-
-       --no-cache
-	      Do  not  update the cache in vendor/cache with the newly bundled
-	      gems. This does not remove any gems in the cache but  keeps  the
-	      newly bundled gems from being cached during the install.
-
-       --no-prune
-	      Don't  remove  stale  gems  from the cache when the installation
-	      finishes.
-
-       --path=<path>
-	      The location to install the specified gems to. This defaults  to
-	      Rubygems'  setting.  Bundler shares this location with Rubygems,
-	      gem install ... will have gem installed there,  too.  Therefore,
-	      gems  installed  without	a  --path  ... setting will show up by
-	      calling gem list. Accordingly, gems installed to other locations
-	      will not get listed.
-
-       --quiet
-	      Do  not  print  progress	information  to  the  standard output.
-	      Instead, Bundler will exit using a status code ($?).
-
-       --retry=[<number>]
-	      Retry failed network or git requests for number times.
-
-       --shebang=<ruby-executable>
-	      Uses the specified ruby executable (usually ruby) to execute the
-	      scripts  created with --binstubs. In addition, if you use --bin-
-	      stubs together with --shebang jruby these  executables  will  be
-	      changed to execute jruby instead.
-
-       --standalone[=<list>]
-	      Makes  a	bundle	that can work without depending on Rubygems or
-	      Bundler at runtime. A space separated list of groups to  install
-	      has  to  be  specified. Bundler creates a directory named bundle
-	      and  installs  the  bundle  there.  It  also  generates  a  bun-
-	      dle/bundler/setup.rb  file to replace Bundler's own setup in the
-	      manner required. Using this option implicitly sets  path,  which
-	      is a [remembered option][REMEMBERED OPTIONS].
-
-       --system
-	      Installs	the  gems  specified  in  the  bundle  to the system's
-	      Rubygems location. This overrides any previous configuration  of
-	      --path.
-
-       --trust-policy=[<policy>]
-	      Apply  the  Rubygems security policy policy, where policy is one
-	      of HighSecurity, MediumSecurity, LowSecurity,  AlmostNoSecurity,
-	      or NoSecurity. For more details, please see the Rubygems signing
-	      documentation linked below in SEE ALSO.
-
-       --with=<list>
-	      A space-separated list of groups referencing gems to install. If
-	      an  optional group is given it is installed. If a group is given
-	      that is in the remembered list of groups given to --without,  it
-	      is removed from that list.
-
-       --without=<list>
-	      A space-separated list of groups referencing gems to skip during
-	      installation. If a group is given that is in the remembered list
-	      of groups given to --with, it is removed from that list.
-
-DEPLOYMENT MODE
-       Bundler's defaults are optimized for development. To switch to defaults
-       optimized for deployment and for CI, use the --deployment flag. Do  not
-       activate  deployment  mode on development machines, as it will cause an
-       error when the Gemfile(5) is modified.
-
-       1.  A Gemfile.lock is required.
-
-	   To ensure that the same versions of the gems you developed with and
-	   tested  with  are  also  used  in  deployments,  a  Gemfile.lock is
-	   required.
-
-	   This is mainly to ensure that  you  remember  to  check  your  Gem-
-	   file.lock into version control.
-
-       2.  The Gemfile.lock must be up to date
-
-	   In  development,  you  can modify your Gemfile(5) and re-run bundle
-	   install to conservatively update your Gemfile.lock snapshot.
-
-	   In deployment, your Gemfile.lock should be up-to-date with  changes
-	   made in your Gemfile(5).
-
-       3.  Gems  are  installed to vendor/bundle not your default system loca-
-	   tion
-
-	   In development, it's convenient to share  the  gems	used  in  your
-	   application	with  other applications and other scripts that run on
-	   the system.
-
-	   In deployment, isolation is a more important default. In  addition,
-	   the	user  deploying  the  application  may	not have permission to
-	   install gems to the system, or the web server may not have  permis-
-	   sion to read them.
-
-	   As  a result, bundle install --deployment installs gems to the ven-
-	   dor/bundle directory in the application.  This  may	be  overridden
-	   using the --path option.
-
-
-
-SUDO USAGE
-       By  default, Bundler installs gems to the same location as gem install.
-
-       In some cases, that location may not be writable by your Unix user.  In
-       that case, Bundler will stage everything in a temporary directory, then
-       ask you for your sudo password in order to copy	the  gems  into  their
-       system location.
-
-       From  your  perspective,  this  is  identical  to  installing  the gems
-       directly into the system.
-
-       You should never use sudo bundle install. This is because several other
-       steps in bundle install must be performed as the current user:
-
-       o   Updating your Gemfile.lock
-
-       o   Updating your vendor/cache, if necessary
-
-       o   Checking out private git repositories using your user's SSH keys
-
-
-
-       Of  these  three,  the  first  two  could theoretically be performed by
-       chowning the resulting files to $SUDO_USER.  The  third,  however,  can
-       only  be  performed  by	invoking  the git command as the current user.
-       Therefore, git gems are downloaded and installed into ~/.bundle	rather
-       than $GEM_HOME or $BUNDLE_PATH.
-
-       As  a  result,  you  should run bundle install as the current user, and
-       Bundler will ask for your password if it is needed to put the gems into
-       their final location.
-
-INSTALLING GROUPS
-       By  default, bundle install will install all gems in all groups in your
-       Gemfile(5), except those declared for a different platform.
-
-       However, you can explicitly tell Bundler  to  skip  installing  certain
-       groups  with  the --without option. This option takes a space-separated
-       list of groups.
-
-       While the --without option will skip installing the gems in the	speci-
-       fied  groups, it will still download those gems and use them to resolve
-       the dependencies of every gem in your Gemfile(5).
-
-       This is so that installing a different set of groups on another machine
-       (such  as  a  production  server) will not change the gems and versions
-       that you have already developed and tested against.
-
-       Bundler offers a rock-solid guarantee that the third-party code you are
-       running in development and testing is also the third-party code you are
-       running in production. You can choose to exclude some of that  code  in
-       different  environments,  but  you  will never be caught flat-footed by
-       different versions of third-party code being used in different environ-
-       ments.
-
-       For a simple illustration, consider the following Gemfile(5):
-
-
-
-	   source 'https://rubygems.org'
-
-	   gem 'sinatra'
-
-	   group :production do
-	     gem 'rack-perftools-profiler'
-	   end
-
-
-
-       In  this  case,	sinatra depends on any version of Rack (>= 1.0), while
-       rack-perftools-profiler depends on 1.x (~> 1.0).
-
-       When you run bundle install --without  production  in  development,  we
-       look  at the dependencies of rack-perftools-profiler as well. That way,
-       you do not spend all your time developing against Rack 2.0,  using  new
-       APIs  unavailable  in Rack 1.x, only to have Bundler switch to Rack 1.2
-       when the production group is used.
-
-       This should not cause any problems  in  practice,  because  we  do  not
-       attempt	to  install the gems in the excluded groups, and only evaluate
-       as part of the dependency resolution process.
-
-       This also means that you cannot include different versions of the  same
-       gem  in	different  groups,  because doing so would result in different
-       sets of dependencies used in development and production. Because of the
-       vagaries  of  the  dependency  resolution process, this usually affects
-       more than the gems you list in your Gemfile(5), and can	(surprisingly)
-       radically change the gems you are using.
-
-THE GEMFILE.LOCK
-       When  you  run  bundle install, Bundler will persist the full names and
-       versions of all gems that you used (including dependencies of the  gems
-       specified in the Gemfile(5)) into a file called Gemfile.lock.
-
-       Bundler uses this file in all subsequent calls to bundle install, which
-       guarantees that you always use the same exact code, even as your appli-
-       cation moves across machines.
-
-       Because	of the way dependency resolution works, even a seemingly small
-       change (for instance, an update to a point-release of a dependency of a
-       gem  in	your  Gemfile(5)) can result in radically different gems being
-       needed to satisfy all dependencies.
-
-       As a result, you SHOULD check your Gemfile.lock into  version  control,
-       in both applications and gems. If you do not, every machine that checks
-       out your repository (including your production server) will resolve all
-       dependencies   again,  which  will  result  in  different  versions  of
-       third-party code being used if any of the gems in the Gemfile(5) or any
-       of their dependencies have been updated.
-
-       When  Bundler first shipped, the Gemfile.lock was included in the .git-
-       ignore file included with generated gems. Over time, however, it became
-       clear  that  this  practice forces the pain of broken dependencies onto
-       new  contributors,  while  leaving  existing  contributors  potentially
-       unaware	of the problem. Since bundle install is usually the first step
-       towards a contribution, the pain of broken dependencies would  discour-
-       age  new  contributors  from contributing. As a result, we have revised
-       our guidance for gem authors to now recommend checking in the lock  for
-       gems.
-
-CONSERVATIVE UPDATING
-       When  you  make a change to the Gemfile(5) and then run bundle install,
-       Bundler will update only the gems that you modified.
-
-       In other words, if a gem that you did  not  modify  worked  before  you
-       called  bundle install, it will continue to use the exact same versions
-       of all dependencies as it used before the update.
-
-       Let's take a look at an example. Here's your original Gemfile(5):
-
-
-
-	   source 'https://rubygems.org'
-
-	   gem 'actionpack', '2.3.8'
-	   gem 'activemerchant'
-
-
-
-       In this case, both actionpack and activemerchant depend	on  activesup-
-       port.  The  actionpack  gem  depends on activesupport 2.3.8 and rack ~>
-       1.1.0, while the activemerchant gem depends on activesupport >=	2.3.2,
-       braintree >= 2.0.0, and builder >= 2.0.0.
-
-       When   the   dependencies  are  first  resolved,  Bundler  will	select
-       activesupport 2.3.8, which satisfies the requirements of both  gems  in
-       your Gemfile(5).
-
-       Next, you modify your Gemfile(5) to:
-
-
-
-	   source 'https://rubygems.org'
-
-	   gem 'actionpack', '3.0.0.rc'
-	   gem 'activemerchant'
-
-
-
-       The  actionpack	3.0.0.rc  gem  has  a  number of new dependencies, and
-       updates the activesupport dependency to = 3.0.0.rc and the rack	depen-
-       dency to ~> 1.2.1.
-
-       When  you  run  bundle  install,  Bundler  notices that you changed the
-       actionpack gem, but not the activemerchant gem. It evaluates  the  gems
-       currently being used to satisfy its requirements:
-
-       activesupport 2.3.8
-	      also  used  to  satisfy a dependency in activemerchant, which is
-	      not being updated
-
-       rack ~> 1.1.0
-	      not currently being used to satisfy another dependency
-
-       Because you did not explicitly ask to update activemerchant, you  would
-       not  expect it to suddenly stop working after updating actionpack. How-
-       ever, satisfying the new activesupport 3.0.0.rc dependency  of  action-
-       pack requires updating one of its dependencies.
-
-       Even  though activemerchant declares a very loose dependency that theo-
-       retically matches activesupport 3.0.0.rc, Bundler treats gems  in  your
-       Gemfile(5)  that have not changed as an atomic unit together with their
-       dependencies. In this case, the activemerchant dependency is treated as
-       activemerchant  1.7.1  +  activesupport	2.3.8,	so bundle install will
-       report that it cannot update actionpack.
-
-       To explicitly update actionpack, including its dependencies which other
-       gems  in  the  Gemfile(5) still depend on, run bundle update actionpack
-       (see bundle update(1)).
-
-       Summary: In general, after making a change  to  the  Gemfile(5)	,  you
-       should  first  try  to run bundle install, which will guarantee that no
-       other gem in the Gemfile(5) is impacted by the change. If that does not
-       work, run bundle update(1) bundle-update.1.html.
-
-SEE ALSO
-       o   Gem				 install			  docs
-	   http://guides.rubygems.org/rubygems-basics/#installing-gems
-
-       o   Rubygems signing docs http://guides.rubygems.org/security/
-
-
-
-
-
-
-				 December 2018		     BUNDLE-INSTALL(1)

data/man/bundle-list.1.txt

@@ -1,43 +0,0 @@
-BUNDLE-LIST(1)							BUNDLE-LIST(1)
-
-
-
-NAME
-       bundle-list - List all the gems in the bundle
-
-SYNOPSIS
-       bundle	 list	 [--name-only]	  [--paths]    [--without-group=GROUP]
-       [--only-group=GROUP]
-
-DESCRIPTION
-       Prints a list of all the gems in the bundle including their version.
-
-       Example:
-
-       bundle list --name-only
-
-       bundle list --paths
-
-       bundle list --without-group test
-
-       bundle list --only-group dev
-
-       bundle list --only-group dev --paths
-
-OPTIONS
-       --name-only
-	      Print only the name of each gem.
-
-       --paths
-	      Print the path to each gem in the bundle.
-
-       --without-group
-	      Print all gems expect from a group.
-
-       --only-group
-	      Print gems from a particular group.
-
-
-
-
-				 December 2018			BUNDLE-LIST(1)

data/man/bundle-lock.1.txt

@@ -1,93 +0,0 @@
-BUNDLE-LOCK(1)							BUNDLE-LOCK(1)
-
-
-
-NAME
-       bundle-lock - Creates / Updates a lockfile without installing
-
-SYNOPSIS
-       bundle	 lock	[--update]   [--local]	 [--print]   [--lockfile=PATH]
-       [--full-index] [--add-platform] [--remove-platform] [--patch] [--minor]
-       [--major] [--strict] [--conservative]
-
-DESCRIPTION
-       Lock the gems specified in Gemfile.
-
-OPTIONS
-       --update=<*gems>
-	      Ignores  the  existing  lockfile. Resolve then updates lockfile.
-	      Taking a list of gems or updating all gems if no list is	given.
-
-       --local
-	      Do not attempt to connect to rubygems.org. Instead, Bundler will
-	      use the gems already present  in	Rubygems'  cache  or  in  ven-
-	      dor/cache.  Note	that  if  a  appropriate platform-specific gem
-	      exists on rubygems.org it will not be found.
-
-       --print
-	      Prints the lockfile to STDOUT instead of	writing  to  the  file
-	      system.
-
-       --lockfile=<path>
-	      The path where the lockfile should be written to.
-
-       --full-index
-	      Fall back to using the single-file index of all gems.
-
-       --add-platform
-	      Add  a  new platform to the lockfile, re-resolving for the addi-
-	      tion of that platform.
-
-       --remove-platform
-	      Remove a platform from the lockfile.
-
-       --patch
-	      If updating, prefer updating only to next patch version.
-
-       --minor
-	      If updating, prefer updating only to next minor version.
-
-       --major
-	      If updating, prefer updating to next major version (default).
-
-       --strict
-	      If updating, do not allow any gem  to  be  updated  past	latest
-	      --patch | --minor | --major.
-
-       --conservative
-	      If updating, use bundle install conservative update behavior and
-	      do not allow shared dependencies to be updated.
-
-UPDATING ALL GEMS
-       If you run bundle lock with  --update  option  without  list  of  gems,
-       bundler	will  ignore  any  previously  installed  gems and resolve all
-       dependencies again based on the latest versions of all  gems  available
-       in the sources.
-
-UPDATING A LIST OF GEMS
-       Sometimes, you want to update a single gem in the Gemfile(5), and leave
-       the rest of the gems that you specified locked to the versions  in  the
-       Gemfile.lock.
-
-       For  instance,  you  only  want	to  update  nokogiri,  run bundle lock
-       --update nokogiri.
-
-       Bundler will update nokogiri and any of its dependencies, but leave the
-       rest  of the gems that you specified locked to the versions in the Gem-
-       file.lock.
-
-SUPPORTING OTHER PLATFORMS
-       If you want your bundle to support platforms other than the one	you're
-       running locally, you can run bundle lock --add-platform PLATFORM to add
-       PLATFORM to the lockfile, force bundler to re-resolve and consider  the
-       new  platform  when picking gems, all without needing to have a machine
-       that matches PLATFORM handy to install those platform-specific gems on.
-
-       For a full explanation of gem platforms, see gem help platform.
-
-PATCH LEVEL OPTIONS
-       See bundle update(1) bundle-update.1.html for details.
-
-
-
-				 November 2018			BUNDLE-LOCK(1)

data/man/bundle-open.1

@@ -1,32 +0,0 @@
-.\" generated with Ronn/v0.7.3
-.\" http://github.com/rtomayko/ronn/tree/0.7.3
-.
-.TH "BUNDLE\-OPEN" "1" "November 2018" "" ""
-.
-.SH "NAME"
-\fBbundle\-open\fR \- Opens the source directory for a gem in your bundle
-.
-.SH "SYNOPSIS"
-\fBbundle open\fR [GEM]
-.
-.SH "DESCRIPTION"
-Opens the source directory of the provided GEM in your editor\.
-.
-.P
-For this to work the \fBEDITOR\fR or \fBBUNDLER_EDITOR\fR environment variable has to be set\.
-.
-.P
-Example:
-.
-.IP "" 4
-.
-.nf
-
-bundle open \'rack\'
-.
-.fi
-.
-.IP "" 0
-.
-.P
-Will open the source directory for the \'rack\' gem in your bundle\.

data/man/bundle-open.1.txt

@@ -1,29 +0,0 @@
-BUNDLE-OPEN(1)							BUNDLE-OPEN(1)
-
-
-
-NAME
-       bundle-open - Opens the source directory for a gem in your bundle
-
-SYNOPSIS
-       bundle open [GEM]
-
-DESCRIPTION
-       Opens the source directory of the provided GEM in your editor.
-
-       For  this to work the EDITOR or BUNDLER_EDITOR environment variable has
-       to be set.
-
-       Example:
-
-
-
-	   bundle open 'rack'
-
-
-
-       Will open the source directory for the 'rack' gem in your bundle.
-
-
-
-				 November 2018			BUNDLE-OPEN(1)