bundler 1.17.3 → 2.6.3

data/man/bundle-check.1.txt

@@ -1,33 +0,0 @@
-BUNDLE-CHECK(1) 					       BUNDLE-CHECK(1)
-
-
-
-NAME
-       bundle-check - Verifies if dependencies are satisfied by installed gems
-
-SYNOPSIS
-       bundle check [--dry-run] [--gemfile=FILE] [--path=PATH]
-
-DESCRIPTION
-       check searches the local machine for each of the gems requested in  the
-       Gemfile.  If  all  gems are found, Bundler prints a success message and
-       exits with a status of 0.
-
-       If not, the first missing gem is listed and Bundler exits status 1.
-
-OPTIONS
-       --dry-run
-	      Locks the [Gemfile(5)][Gemfile(5)] before running the command.
-
-       --gemfile
-	      Use the  specified  gemfile  instead  of	the  [Gemfile(5)][Gem-
-	      file(5)].
-
-       --path Specify  a  different path than the system default ($BUNDLE_PATH
-	      or $GEM_HOME). Bundler  will  remember  this  value  for	future
-	      installs on this machine.
-
-
-
-
-				 November 2018		       BUNDLE-CHECK(1)

data/man/bundle-clean.1.txt

@@ -1,26 +0,0 @@
-BUNDLE-CLEAN(1) 					       BUNDLE-CLEAN(1)
-
-
-
-NAME
-       bundle-clean - Cleans up unused gems in your bundler directory
-
-SYNOPSIS
-       bundle clean [--dry-run] [--force]
-
-DESCRIPTION
-       This  command  will  remove  all unused gems in your bundler directory.
-       This is useful when you have made many changes to  your	gem  dependen-
-       cies.
-
-OPTIONS
-       --dry-run
-	      Print the changes, but do not clean the unused gems.
-
-       --force
-	      Force a clean even if --path is not set.
-
-
-
-
-				 December 2018		       BUNDLE-CLEAN(1)

data/man/bundle-config.1.txt

@@ -1,529 +0,0 @@
-BUNDLE-CONFIG(1)					      BUNDLE-CONFIG(1)
-
-
-
-NAME
-       bundle-config - Set bundler configuration options
-
-SYNOPSIS
-       bundle config [name [value]]
-
-DESCRIPTION
-       This  command  allows you to interact with Bundler's configuration sys-
-       tem.
-
-       Bundler loads configuration settings in this order:
-
-       1.  Local config (app/.bundle/config)
-
-       2.  Environmental variables (ENV)
-
-       3.  Global config (~/.bundle/config)
-
-       4.  Bundler default config
-
-
-
-       Executing bundle config with no parameters will print  a  list  of  all
-       bundler configuration for the current bundle, and where that configura-
-       tion was set.
-
-       Executing bundle config <name> will print the value of that  configura-
-       tion setting, and where it was set.
-
-       Executing  bundle  config <name> <value> will set that configuration to
-       the value specified for all bundles executed as the current  user.  The
-       configuration  will  be	stored in ~/.bundle/config. If name already is
-       set, name will be overridden and user will be warned.
-
-       Executing bundle config --global  <name>  <value>  works  the  same  as
-       above.
-
-       Executing bundle config --local <name> <value> will set that configura-
-       tion to the local application. The  configuration  will	be  stored  in
-       app/.bundle/config.
-
-       Executing  bundle  config --delete <name> will delete the configuration
-       in both local and global  sources.  Not	compatible  with  --global  or
-       --local flag.
-
-       Executing bundle with the BUNDLE_IGNORE_CONFIG environment variable set
-       will cause it to ignore all configuration.
-
-       Executing bundle config disable_multisource true upgrades  the  warning
-       about the Gemfile containing multiple primary sources to an error. Exe-
-       cuting bundle config --delete disable_multisource downgrades this error
-       to a warning.
-
-REMEMBERING OPTIONS
-       Flags  passed  to bundle install or the Bundler runtime, such as --path
-       foo or --without production, are not remembered	between  commands.  If
-       these  options  must be remembered,they must be set using bundle config
-       (e.g., bundle config path foo).
-
-       The options that can be configured are:
-
-       bin    Creates a directory (defaults to ~/bin) and place  any  executa-
-	      bles from the gem there. These executables run in Bundler's con-
-	      text. If used, you might add this  directory  to	your  environ-
-	      ment's  PATH variable. For instance, if the rails gem comes with
-	      a rails executable, this flag will create a bin/rails executable
-	      that  ensures  that  all	referred dependencies will be resolved
-	      using the bundled gems.
-
-       deployment
-	      In deployment mode, Bundler will 'roll-out' the bundle for  pro-
-	      duction  use.  Please  check  carefully if you want to have this
-	      option enabled in development or test environments.
-
-       path   The location to install the specified gems to. This defaults  to
-	      Rubygems'  setting.  Bundler shares this location with Rubygems,
-	      gem install ... will have gem installed there,  too.  Therefore,
-	      gems  installed  without	a  --path  ... setting will show up by
-	      calling gem list. Accordingly, gems installed to other locations
-	      will not get listed.
-
-       without
-	      A space-separated list of groups referencing gems to skip during
-	      installation.
-
-       with   A space-separated list of groups	referencing  gems  to  include
-	      during installation.
-
-BUILD OPTIONS
-       You  can use bundle config to give Bundler the flags to pass to the gem
-       installer every time bundler tries to install a particular gem.
-
-       A very common example, the mysql gem, requires Snow  Leopard  users  to
-       pass  configuration  flags  to gem install to specify where to find the
-       mysql_config executable.
-
-
-
-	   gem install mysql -- --with-mysql-config=/usr/local/mysql/bin/mysql_config
-
-
-
-       Since the specific location of that executable can change from  machine
-       to machine, you can specify these flags on a per-machine basis.
-
-
-
-	   bundle config build.mysql --with-mysql-config=/usr/local/mysql/bin/mysql_config
-
-
-
-       After  running  this  command,  every time bundler needs to install the
-       mysql gem, it will pass along the flags you specified.
-
-CONFIGURATION KEYS
-       Configuration keys in bundler have two forms: the  canonical  form  and
-       the environment variable form.
-
-       For  instance,  passing	the  --without	flag to bundle install(1) bun-
-       dle-install.1.html prevents  Bundler  from  installing  certain	groups
-       specified  in  the Gemfile(5). Bundler persists this value in app/.bun-
-       dle/config so that calls to Bundler.setup do not try to find gems  from
-       the  Gemfile that you didn't install. Additionally, subsequent calls to
-       bundle install(1) bundle-install.1.html remember this setting and  skip
-       those groups.
-
-       The  canonical  form of this configuration is "without". To convert the
-       canonical form to the environment variable  form,  capitalize  it,  and
-       prepend	BUNDLE_.  The  environment  variable form of "without" is BUN-
-       DLE_WITHOUT.
-
-       Any periods in the configuration keys must be replaced with two	under-
-       scores when setting it via environment variables. The configuration key
-       local.rack becomes the environment variable BUNDLE_LOCAL__RACK.
-
-LIST OF AVAILABLE KEYS
-       The following is a list of all configuration keys  and  their  purpose.
-       You  can  learn	more  about  their operation in bundle install(1) bun-
-       dle-install.1.html.
-
-       o   allow_bundler_dependency_conflicts	  (BUNDLE_ALLOW_BUNDLER_DEPEN-
-	   DENCY_CONFLICTS):  Allow  resolving	to  specifications  that  have
-	   dependencies on bundler that  are  incompatible  with  the  running
-	   Bundler version.
-
-       o   allow_deployment_source_credential_changes	 (BUNDLE_ALLOW_DEPLOY-
-	   MENT_SOURCE_CREDENTIAL_CHANGES): When  in  deployment  mode,  allow
-	   changing    the    credentials    to    a	gem's	 source.   Ex:
-	   https://some.host.com/gems/path/	->     https://user_name:pass-
-	   word@some.host.com/gems/path
-
-       o   allow_offline_install (BUNDLE_ALLOW_OFFLINE_INSTALL): Allow Bundler
-	   to use cached data when installing without network access.
-
-       o   auto_clean_without_path (BUNDLE_AUTO_CLEAN_WITHOUT_PATH): Automati-
-	   cally  run  bundle clean after installing when an explicit path has
-	   not been set and Bundler is not installing into the system gems.
-
-       o   auto_install  (BUNDLE_AUTO_INSTALL):   Automatically   run	bundle
-	   install when gems are missing.
-
-       o   bin	(BUNDLE_BIN):  Install	executables from gems in the bundle to
-	   the specified directory. Defaults to false.
-
-       o   cache_all (BUNDLE_CACHE_ALL): Cache all gems,  including  path  and
-	   git gems.
-
-       o   cache_all_platforms	(BUNDLE_CACHE_ALL_PLATFORMS):  Cache  gems for
-	   all platforms.
-
-       o   cache_path (BUNDLE_CACHE_PATH): The	directory  that  bundler  will
-	   place  cached gems in when running bundle package, and that bundler
-	   will look in when installing gems. Defaults to vendor/bundle.
-
-       o   clean (BUNDLE_CLEAN): Whether Bundler should run bundle clean auto-
-	   matically after bundle install.
-
-       o   console  (BUNDLE_CONSOLE):  The console that bundle console starts.
-	   Defaults to irb.
-
-       o   default_install_uses_path	   (BUNDLE_DEFAULT_INSTALL_USES_PATH):
-	   Whether  a  bundle  install	without  an  explicit  --path argument
-	   defaults to installing gems in .bundle.
-
-       o   deployment (BUNDLE_DEPLOYMENT): Disallow changes  to  the  Gemfile.
-	   When  the Gemfile is changed and the lockfile has not been updated,
-	   running Bundler commands will be blocked.
-
-       o   disable_checksum_validation	 (BUNDLE_DISABLE_CHECKSUM_VALIDATION):
-	   Allow  installing  gems even if they do not match the checksum pro-
-	   vided by RubyGems.
-
-       o   disable_exec_load  (BUNDLE_DISABLE_EXEC_LOAD):  Stop  Bundler  from
-	   using load to launch an executable in-process in bundle exec.
-
-       o   disable_local_branch_check	  (BUNDLE_DISABLE_LOCAL_BRANCH_CHECK):
-	   Allow Bundler to use a local git override without a	branch	speci-
-	   fied in the Gemfile.
-
-       o   disable_multisource	(BUNDLE_DISABLE_MULTISOURCE):  When  set, Gem-
-	   files containing multiple sources will produce  errors  instead  of
-	   warnings.  Use bundle config --delete disable_multisource to unset.
-
-       o   disable_platform_warnings (BUNDLE_DISABLE_PLATFORM_WARNINGS):  Dis-
-	   able  warnings during bundle install when a dependency is unused on
-	   the current platform.
-
-       o   disable_shared_gems (BUNDLE_DISABLE_SHARED_GEMS): Stop Bundler from
-	   accessing gems installed to RubyGems' normal location.
-
-       o   disable_version_check  (BUNDLE_DISABLE_VERSION_CHECK): Stop Bundler
-	   from  checking  if  a  newer  Bundler  version  is	available   on
-	   rubygems.org.
-
-       o   error_on_stderr  (BUNDLE_ERROR_ON_STDERR):  Print Bundler errors to
-	   stderr.
-
-       o   force_ruby_platform (BUNDLE_FORCE_RUBY_PLATFORM): Ignore  the  cur-
-	   rent  machine's  platform and install only ruby platform gems. As a
-	   result, gems with native extensions will be compiled from source.
-
-       o   frozen (BUNDLE_FROZEN): Disallow changes to the Gemfile.  When  the
-	   Gemfile  is	changed and the lockfile has not been updated, running
-	   Bundler commands will be blocked. Defaults to true  when  --deploy-
-	   ment is used.
-
-       o   gem.push_key  (BUNDLE_GEM__PUSH_KEY):  Sets the --key parameter for
-	   gem push when using the rake release command with  a  private  gem-
-	   stash server.
-
-       o   gemfile  (BUNDLE_GEMFILE): The name of the file that bundler should
-	   use as the Gemfile. This location of this file also sets  the  root
-	   of the project, which is used to resolve relative paths in the Gem-
-	   file, among other things. By default, bundler will search  up  from
-	   the current working directory until it finds a Gemfile.
-
-       o   global_gem_cache  (BUNDLE_GLOBAL_GEM_CACHE): Whether Bundler should
-	   cache all gems globally, rather than locally to the installing Ruby
-	   installation.
-
-       o   global_path_appends_ruby_scope				 (BUN-
-	   DLE_GLOBAL_PATH_APPENDS_RUBY_SCOPE): Whether Bundler should	append
-	   the	Ruby scope (e.g. engine and ABI version) to a globally-config-
-	   ured path.
-
-       o   ignore_messages (BUNDLE_IGNORE_MESSAGES): When set, no post install
-	   messages will be printed. To silence a single gem, use dot notation
-	   like ignore_messages.httparty true.
-
-       o   init_gems_rb (BUNDLE_INIT_GEMS_RB) Generate a gems.rb instead of  a
-	   Gemfile when running bundle init.
-
-       o   jobs  (BUNDLE_JOBS): The number of gems Bundler can install in par-
-	   allel. Defaults to 1.
-
-       o   list_command (BUNDLE_LIST_COMMAND) Enable new list command feature
-
-       o   major_deprecations  (BUNDLE_MAJOR_DEPRECATIONS):  Whether   Bundler
-	   should print deprecation warnings for behavior that will be changed
-	   in the next major version.
-
-       o   no_install (BUNDLE_NO_INSTALL): Whether bundle package should  skip
-	   installing gems.
-
-       o   no_prune  (BUNDLE_NO_PRUNE):  Whether Bundler should leave outdated
-	   gems unpruned when caching.
-
-       o   only_update_to_newer_versions     (BUNDLE_ONLY_UPDATE_TO_NEWER_VER-
-	   SIONS): During bundle update, only resolve to newer versions of the
-	   gems in the lockfile.
-
-       o   path (BUNDLE_PATH): The location on disk where  all	gems  in  your
-	   bundle will be located regardless of $GEM_HOME or $GEM_PATH values.
-	   Bundle gems not found in this location will be installed by	bundle
-	   install.  Defaults  to Gem.dir. When --deployment is used, defaults
-	   to vendor/bundle.
-
-       o   path.system (BUNDLE_PATH__SYSTEM):  Whether	Bundler  will  install
-	   gems into the default system path (Gem.dir).
-
-       o   path_relative_to_cwd  (PATH_RELATIVE_TO_CWD)  Makes --path relative
-	   to the CWD instead of the Gemfile.
-
-       o   plugins (BUNDLE_PLUGINS): Enable Bundler's experimental plugin sys-
-	   tem.
-
-       o   prefer_gems_rb  (BUNDLE_PREFER_GEMS_RB)  Prefer  gems.rb to Gemfile
-	   when Bundler is searching for a Gemfile.
-
-       o   print_only_version_number (BUNDLE_PRINT_ONLY_VERSION_NUMBER)  Print
-	   only version number from bundler --version.
-
-       o   redirect  (BUNDLE_REDIRECT):  The  number  of redirects allowed for
-	   network requests. Defaults to 5.
-
-       o   retry (BUNDLE_RETRY): The number of times to retry  failed  network
-	   requests. Defaults to 3.
-
-       o   setup_makes_kernel_gem_public   (BUNDLE_SETUP_MAKES_KERNEL_GEM_PUB-
-	   LIC): Have Bundler.setup make the Kernel#gem  method  public,  even
-	   though RubyGems declares it as private.
-
-       o   shebang  (BUNDLE_SHEBANG):  The program name that should be invoked
-	   for generated binstubs. Defaults to the ruby install name  used  to
-	   generate the binstub.
-
-       o   silence_root_warning   (BUNDLE_SILENCE_ROOT_WARNING):  Silence  the
-	   warning Bundler prints when installing gems as root.
-
-       o   skip_default_git_sources (BUNDLE_SKIP_DEFAULT_GIT_SOURCES): Whether
-	   Bundler should skip adding default git source shortcuts to the Gem-
-	   file DSL.
-
-       o   specific_platform  (BUNDLE_SPECIFIC_PLATFORM):  Allow  bundler   to
-	   resolve for the specific running platform and store it in the lock-
-	   file, instead of only using a generic platform. A specific platform
-	   is  the exact platform triple reported by Gem::Platform.local, such
-	   as x86_64-darwin-16	or  universal-java-1.8.  On  the  other  hand,
-	   generic  platforms  are those such as ruby, mswin, or java. In this
-	   example, x86_64-darwin-16 would map to ruby and  universal-java-1.8
-	   to java.
-
-       o   ssl_ca_cert	(BUNDLE_SSL_CA_CERT): Path to a designated CA certifi-
-	   cate file or folder containing multiple  certificates  for  trusted
-	   CAs in PEM format.
-
-       o   ssl_client_cert (BUNDLE_SSL_CLIENT_CERT): Path to a designated file
-	   containing a X.509 client certificate and key in PEM format.
-
-       o   ssl_verify_mode (BUNDLE_SSL_VERIFY_MODE): The SSL verification mode
-	   Bundler uses when making HTTPS requests. Defaults to verify peer.
-
-       o   suppress_install_using_messages (BUNDLE_SUPPRESS_INSTALL_USING_MES-
-	   SAGES): Avoid printing Using ... messages during installation  when
-	   the version of a gem has not changed.
-
-       o   system_bindir  (BUNDLE_SYSTEM_BINDIR):  The location where RubyGems
-	   installs binstubs. Defaults to Gem.bindir.
-
-       o   timeout (BUNDLE_TIMEOUT): The seconds allowed before timing out for
-	   network requests. Defaults to 10.
-
-       o   unlock_source_unlocks_spec	  (BUNDLE_UNLOCK_SOURCE_UNLOCKS_SPEC):
-	   Whether running bundle update --source NAME unlocks a gem with  the
-	   given name. Defaults to true.
-
-       o   update_requires_all_flag  (BUNDLE_UPDATE_REQUIRES_ALL_FLAG) Require
-	   passing --all to bundle update when everything should  be  updated,
-	   and disallow passing no options to bundle update.
-
-       o   user_agent  (BUNDLE_USER_AGENT):  The  custom  user	agent fragment
-	   Bundler includes in API requests.
-
-       o   with (BUNDLE_WITH): A :-separated list of groups whose gems bundler
-	   should install.
-
-       o   without  (BUNDLE_WITHOUT):  A :-separated list of groups whose gems
-	   bundler should not install.
-
-
-
-       In general, you should set these settings per-application by using  the
-       applicable  flag to the bundle install(1) bundle-install.1.html or bun-
-       dle package(1) bundle-package.1.html command.
-
-       You can set them globally either via environment  variables  or	bundle
-       config,	whichever is preferable for your setup. If you use both, envi-
-       ronment variables will take preference over global settings.
-
-LOCAL GIT REPOS
-       Bundler also allows you	to  work  against  a  git  repository  locally
-       instead of using the remote version. This can be achieved by setting up
-       a local override:
-
-
-
-	   bundle config local.GEM_NAME /path/to/local/git/repository
-
-
-
-       For example, in order to use a local Rack repository, a developer could
-       call:
-
-
-
-	   bundle config local.rack ~/Work/git/rack
-
-
-
-       Now  instead of checking out the remote git repository, the local over-
-       ride will be used. Similar to a path source, every time the  local  git
-       repository  change, changes will be automatically picked up by Bundler.
-       This means a commit in the local git repo will update the  revision  in
-       the Gemfile.lock to the local git repo revision. This requires the same
-       attention as git submodules. Before pushing to the remote, you need  to
-       ensure the local override was pushed, otherwise you may point to a com-
-       mit that only exists in your local machine. You'll  also  need  to  CGI
-       escape your usernames and passwords as well.
-
-       Bundler	does many checks to ensure a developer won't work with invalid
-       references. Particularly, we force a developer to specify a  branch  in
-       the  Gemfile  in  order to use this feature. If the branch specified in
-       the Gemfile and the current branch in the local git repository  do  not
-       match,  Bundler	will  abort.  This  ensures that a developer is always
-       working against the correct branches, and prevents  accidental  locking
-       to a different branch.
-
-       Finally,  Bundler  also	ensures  that the current revision in the Gem-
-       file.lock exists in the local git repository. By  doing	this,  Bundler
-       forces you to fetch the latest changes in the remotes.
-
-MIRRORS OF GEM SOURCES
-       Bundler	supports  overriding gem sources with mirrors. This allows you
-       to configure rubygems.org as the gem source in your Gemfile while still
-       using your mirror to fetch gems.
-
-
-
-	   bundle config mirror.SOURCE_URL MIRROR_URL
-
-
-
-       For  example,  to  use a mirror of rubygems.org hosted at rubygems-mir-
-       ror.org:
-
-
-
-	   bundle config mirror.http://rubygems.org http://rubygems-mirror.org
-
-
-
-       Each mirror also provides a fallback timeout  setting.  If  the	mirror
-       does  not  respond within the fallback timeout, Bundler will try to use
-       the original server instead of the mirror.
-
-
-
-	   bundle config mirror.SOURCE_URL.fallback_timeout TIMEOUT
-
-
-
-       For example, to fall back to rubygems.org after 3 seconds:
-
-
-
-	   bundle config mirror.https://rubygems.org.fallback_timeout 3
-
-
-
-       The default fallback timeout is 0.1 seconds, but the setting  can  cur-
-       rently only accept whole seconds (for example, 1, 15, or 30).
-
-CREDENTIALS FOR GEM SOURCES
-       Bundler	allows	you to configure credentials for any gem source, which
-       allows you to avoid putting secrets into your Gemfile.
-
-
-
-	   bundle config SOURCE_HOSTNAME USERNAME:PASSWORD
-
-
-
-       For example, to save the credentials of	user  claudette  for  the  gem
-       source at gems.longerous.com, you would run:
-
-
-
-	   bundle config gems.longerous.com claudette:s00pers3krit
-
-
-
-       Or you can set the credentials as an environment variable like this:
-
-
-
-	   export BUNDLE_GEMS__LONGEROUS__COM="claudette:s00pers3krit"
-
-
-
-       For gems with a git source with HTTP(S) URL you can specify credentials
-       like so:
-
-
-
-	   bundle config https://github.com/bundler/bundler.git username:password
-
-
-
-       Or you can set the credentials as an environment variable like so:
-
-
-
-	   export BUNDLE_GITHUB__COM=username:password
-
-
-
-       This is especially useful for private repositories  on  hosts  such  as
-       Github, where you can use personal OAuth tokens:
-
-
-
-	   export BUNDLE_GITHUB__COM=abcd0123generatedtoken:x-oauth-basic
-
-
-
-CONFIGURE BUNDLER DIRECTORIES
-       Bundler's  home,  config,  cache  and plugin directories are able to be
-       configured through environment  variables.  The	default  location  for
-       Bundler's  home	directory  is ~/.bundle, which all directories inherit
-       from by default. The following outlines the available environment vari-
-       ables and their default values
-
-
-
-	   BUNDLE_USER_HOME : $HOME/.bundle
-	   BUNDLE_USER_CACHE : $BUNDLE_USER_HOME/cache
-	   BUNDLE_USER_CONFIG : $BUNDLE_USER_HOME/config
-	   BUNDLE_USER_PLUGIN : $BUNDLE_USER_HOME/plugin
-
-
-
-
-
-
-				 December 2018		      BUNDLE-CONFIG(1)

data/man/bundle-doctor.1.txt

@@ -1,44 +0,0 @@
-BUNDLE-DOCTOR(1)					      BUNDLE-DOCTOR(1)
-
-
-
-NAME
-       bundle-doctor - Checks the bundle for common problems
-
-SYNOPSIS
-       bundle doctor [--quiet] [--gemfile=GEMFILE]
-
-DESCRIPTION
-       Checks  your Gemfile and gem environment for common problems. If issues
-       are detected, Bundler  prints  them  and  exits	status	1.  Otherwise,
-       Bundler prints a success message and exits status 0.
-
-       Examples of common problems caught by bundle-doctor include:
-
-       o   Invalid Bundler settings
-
-       o   Mismatched Ruby versions
-
-       o   Mismatched platforms
-
-       o   Uninstalled gems
-
-       o   Missing dependencies
-
-
-
-OPTIONS
-       --quiet
-	      Only output warnings and errors.
-
-       --gemfile=<gemfile>
-	      The  location  of  the Gemfile(5) which Bundler should use. This
-	      defaults to a Gemfile(5) in the current  working	directory.  In
-	      general, Bundler will assume that the location of the Gemfile(5)
-	      is also the project's root and will try to find Gemfile.lock and
-	      vendor/cache relative to this location.
-
-
-
-
-				 November 2018		      BUNDLE-DOCTOR(1)