bolt 0.0.1 → 0.5.0

data/vendored/puppet/lib/puppet/util/windows/security.rb

@@ -0,0 +1,857 @@
+# This class maps POSIX owner, group, and modes to the Windows
+# security model, and back.
+#
+# The primary goal of this mapping is to ensure that owner, group, and
+# modes can be round-tripped in a consistent and deterministic
+# way. Otherwise, Puppet might think file resources are out-of-sync
+# every time it runs. A secondary goal is to provide equivalent
+# permissions for common use-cases. For example, setting the owner to
+# "Administrators", group to "Users", and mode to 750 (which also
+# denies access to everyone else.
+#
+# There are some well-known problems mapping windows and POSIX
+# permissions due to differences between the two security
+# models. Search for "POSIX permission mapping leak". In POSIX, access
+# to a file is determined solely based on the most specific class
+# (user, group, other). So a mode of 460 would deny write access to
+# the owner even if they are a member of the group. But in Windows,
+# the entire access control list is walked until the user is
+# explicitly denied or allowed (denied take precedence, and if neither
+# occurs they are denied). As a result, a user could be allowed access
+# based on their group membership. To solve this problem, other people
+# have used deny access control entries to more closely model POSIX,
+# but this introduces a lot of complexity.
+#
+# In general, this implementation only supports "typical" permissions,
+# where group permissions are a subset of user, and other permissions
+# are a subset of group, e.g. 754, but not 467.  However, there are
+# some Windows quirks to be aware of.
+#
+# * The owner can be either a user or group SID, and most system files
+#   are owned by the Administrators group.
+# * The group can be either a user or group SID.
+# * Unexpected results can occur if the owner and group are the
+#   same, but the user and group classes are different, e.g. 750. In
+#   this case, it is not possible to allow write access to the owner,
+#   but not the group. As a result, the actual permissions set on the
+#   file would be 770.
+# * In general, only privileged users can set the owner, group, or
+#   change the mode for files they do not own. In 2003, the user must
+#   be a member of the Administrators group. In Vista/2008, the user
+#   must be running with elevated privileges.
+# * A file/dir can be deleted by anyone with the DELETE access right
+#   OR by anyone that has the FILE_DELETE_CHILD access right for the
+#   parent. See https://support.microsoft.com/kb/238018. But on Unix,
+#   the user must have write access to the file/dir AND execute access
+#   to all of the parent path components.
+# * Many access control entries are inherited from parent directories,
+#   and it is common for file/dirs to have more than 3 entries,
+#   e.g. Users, Power Users, Administrators, SYSTEM, etc, which cannot
+#   be mapped into the 3 class POSIX model. The get_mode method will
+#   set the S_IEXTRA bit flag indicating that an access control entry
+#   was found whose SID is neither the owner, group, or other. This
+#   enables Puppet to detect when file/dirs are out-of-sync,
+#   especially those that Puppet did not create, but is attempting
+#   to manage.
+# * A special case of this is S_ISYSTEM_MISSING, which is set when the
+#   SYSTEM permissions are *not* present on the DACL.
+# * On Unix, the owner and group can be modified without changing the
+#   mode. But on Windows, an access control entry specifies which SID
+#   it applies to. As a result, the set_owner and set_group methods
+#   automatically rebuild the access control list based on the new
+#   (and different) owner or group.
+
+require 'puppet/util/windows'
+require 'pathname'
+require 'ffi'
+
+module Puppet::Util::Windows::Security
+  include Puppet::Util::Windows::String
+
+  extend Puppet::Util::Windows::Security
+  extend FFI::Library
+
+  # file modes
+  S_IRUSR = 0000400
+  S_IRGRP = 0000040
+  S_IROTH = 0000004
+  S_IWUSR = 0000200
+  S_IWGRP = 0000020
+  S_IWOTH = 0000002
+  S_IXUSR = 0000100
+  S_IXGRP = 0000010
+  S_IXOTH = 0000001
+  S_IRWXU = 0000700
+  S_IRWXG = 0000070
+  S_IRWXO = 0000007
+  S_ISVTX = 0001000
+  S_IEXTRA = 02000000  # represents an extra ace
+  S_ISYSTEM_MISSING = 04000000
+
+  # constants that are missing from Windows::Security
+  PROTECTED_DACL_SECURITY_INFORMATION   = 0x80000000
+  UNPROTECTED_DACL_SECURITY_INFORMATION = 0x20000000
+  NO_INHERITANCE = 0x0
+  SE_DACL_PROTECTED = 0x1000
+
+  FILE = Puppet::Util::Windows::File
+
+  SE_BACKUP_NAME              = 'SeBackupPrivilege'
+  SE_RESTORE_NAME             = 'SeRestorePrivilege'
+
+  DELETE                      = 0x00010000
+  READ_CONTROL                = 0x20000
+  WRITE_DAC                   = 0x40000
+  WRITE_OWNER                 = 0x80000
+
+  OWNER_SECURITY_INFORMATION  = 1
+  GROUP_SECURITY_INFORMATION  = 2
+  DACL_SECURITY_INFORMATION   = 4
+
+  # Set the owner of the object referenced by +path+ to the specified
+  # +owner_sid+.  The owner sid should be of the form "S-1-5-32-544"
+  # and can either be a user or group.  Only a user with the
+  # SE_RESTORE_NAME privilege in their process token can overwrite the
+  # object's owner to something other than the current user.
+  def set_owner(owner_sid, path)
+    sd = get_security_descriptor(path)
+
+    if owner_sid != sd.owner
+      sd.owner = owner_sid
+      set_security_descriptor(path, sd)
+    end
+  end
+
+  # Get the owner of the object referenced by +path+.  The returned
+  # value is a SID string, e.g. "S-1-5-32-544".  Any user with read
+  # access to an object can get the owner. Only a user with the
+  # SE_BACKUP_NAME privilege in their process token can get the owner
+  # for objects they do not have read access to.
+  def get_owner(path)
+    return unless supports_acl?(path)
+
+    get_security_descriptor(path).owner
+  end
+
+  # Set the owner of the object referenced by +path+ to the specified
+  # +group_sid+.  The group sid should be of the form "S-1-5-32-544"
+  # and can either be a user or group.  Any user with WRITE_OWNER
+  # access to the object can change the group (regardless of whether
+  # the current user belongs to that group or not).
+  def set_group(group_sid, path)
+    sd = get_security_descriptor(path)
+
+    if group_sid != sd.group
+      sd.group = group_sid
+      set_security_descriptor(path, sd)
+    end
+  end
+
+  # Get the group of the object referenced by +path+.  The returned
+  # value is a SID string, e.g. "S-1-5-32-544".  Any user with read
+  # access to an object can get the group. Only a user with the
+  # SE_BACKUP_NAME privilege in their process token can get the group
+  # for objects they do not have read access to.
+  def get_group(path)
+    return unless supports_acl?(path)
+
+    get_security_descriptor(path).group
+  end
+
+  FILE_PERSISTENT_ACLS           = 0x00000008
+
+  def supports_acl?(path)
+    supported = false
+    root = Pathname.new(path).enum_for(:ascend).to_a.last.to_s
+    # 'A trailing backslash is required'
+    root = "#{root}\\" unless root =~ /[\/\\]$/
+
+    FFI::MemoryPointer.new(:pointer, 1) do |flags_ptr|
+      if GetVolumeInformationW(wide_string(root), FFI::Pointer::NULL, 0,
+          FFI::Pointer::NULL, FFI::Pointer::NULL,
+          flags_ptr, FFI::Pointer::NULL, 0) == FFI::WIN32_FALSE
+        raise Puppet::Util::Windows::Error.new(_("Failed to get volume information"))
+      end
+      supported = flags_ptr.read_dword & FILE_PERSISTENT_ACLS == FILE_PERSISTENT_ACLS
+    end
+
+    supported
+  end
+
+  MASK_TO_MODE = {
+    FILE::FILE_GENERIC_READ => S_IROTH,
+    FILE::FILE_GENERIC_WRITE => S_IWOTH,
+    (FILE::FILE_GENERIC_EXECUTE & ~FILE::FILE_READ_ATTRIBUTES) => S_IXOTH
+  }
+
+  def get_aces_for_path_by_sid(path, sid)
+    get_security_descriptor(path).dacl.select { |ace| ace.sid == sid }
+  end
+
+  # Get the mode of the object referenced by +path+.  The returned
+  # integer value represents the POSIX-style read, write, and execute
+  # modes for the user, group, and other classes, e.g. 0640.  Any user
+  # with read access to an object can get the mode. Only a user with
+  # the SE_BACKUP_NAME privilege in their process token can get the
+  # mode for objects they do not have read access to.
+  def get_mode(path)
+    return unless supports_acl?(path)
+
+    well_known_world_sid = Puppet::Util::Windows::SID::Everyone
+    well_known_nobody_sid = Puppet::Util::Windows::SID::Nobody
+    well_known_system_sid = Puppet::Util::Windows::SID::LocalSystem
+
+    mode = S_ISYSTEM_MISSING
+
+    sd = get_security_descriptor(path)
+    sd.dacl.each do |ace|
+      next if ace.inherit_only?
+
+      case ace.sid
+      when sd.owner
+        MASK_TO_MODE.each_pair do |k,v|
+          if (ace.mask & k) == k
+            mode |= (v << 6)
+          end
+        end
+      when sd.group
+        MASK_TO_MODE.each_pair do |k,v|
+          if (ace.mask & k) == k
+            mode |= (v << 3)
+          end
+        end
+      when well_known_world_sid
+        MASK_TO_MODE.each_pair do |k,v|
+          if (ace.mask & k) == k
+            mode |= (v << 6) | (v << 3) | v
+          end
+        end
+        if File.directory?(path) &&
+          (ace.mask & (FILE::FILE_WRITE_DATA | FILE::FILE_EXECUTE | FILE::FILE_DELETE_CHILD)) == (FILE::FILE_WRITE_DATA | FILE::FILE_EXECUTE)
+          mode |= S_ISVTX;
+        end
+      when well_known_nobody_sid
+        if (ace.mask & FILE::FILE_APPEND_DATA).nonzero?
+          mode |= S_ISVTX
+        end
+      when well_known_system_sid
+      else
+        #puts "Warning, unable to map SID into POSIX mode: #{ace.sid}"
+        mode |= S_IEXTRA
+      end
+
+      if ace.sid == well_known_system_sid
+        mode &= ~S_ISYSTEM_MISSING
+      end
+
+      # if owner and group the same, then user and group modes are the OR of both
+      if sd.owner == sd.group
+        mode |= ((mode & S_IRWXG) << 3) | ((mode & S_IRWXU) >> 3)
+        #puts "owner: #{sd.group}, 0x#{ace.mask.to_s(16)}, #{mode.to_s(8)}"
+      end
+    end
+
+    #puts "get_mode: #{mode.to_s(8)}"
+    mode
+  end
+
+  MODE_TO_MASK = {
+    S_IROTH => FILE::FILE_GENERIC_READ,
+    S_IWOTH => FILE::FILE_GENERIC_WRITE,
+    S_IXOTH => (FILE::FILE_GENERIC_EXECUTE & ~FILE::FILE_READ_ATTRIBUTES),
+  }
+
+  # Set the mode of the object referenced by +path+ to the specified
+  # +mode+. The mode should be specified as POSIX-style read, write,
+  # and execute modes for the user, group, and other classes,
+  # e.g. 0640. The sticky bit, S_ISVTX, is supported, but is only
+  # meaningful for directories. If set, group and others are not
+  # allowed to delete child objects for which they are not the owner.
+  # By default, the DACL is set to protected, meaning it does not
+  # inherit access control entries from parent objects. This can be
+  # changed by setting +protected+ to false. The owner of the object
+  # (with READ_CONTROL and WRITE_DACL access) can always change the
+  # mode. Only a user with the SE_BACKUP_NAME and SE_RESTORE_NAME
+  # privileges in their process token can change the mode for objects
+  # that they do not have read and write access to.
+  def set_mode(mode, path, protected = true)
+    sd = get_security_descriptor(path)
+    well_known_world_sid = Puppet::Util::Windows::SID::Everyone
+    well_known_nobody_sid = Puppet::Util::Windows::SID::Nobody
+    well_known_system_sid = Puppet::Util::Windows::SID::LocalSystem
+
+    owner_allow = FILE::STANDARD_RIGHTS_ALL  |
+      FILE::FILE_READ_ATTRIBUTES |
+      FILE::FILE_WRITE_ATTRIBUTES
+    group_allow = FILE::STANDARD_RIGHTS_READ |
+      FILE::FILE_READ_ATTRIBUTES |
+      FILE::SYNCHRONIZE
+    other_allow = FILE::STANDARD_RIGHTS_READ |
+      FILE::FILE_READ_ATTRIBUTES |
+      FILE::SYNCHRONIZE
+    nobody_allow = 0
+    system_allow = 0
+
+    MODE_TO_MASK.each do |k,v|
+      if ((mode >> 6) & k) == k
+        owner_allow |= v
+      end
+      if ((mode >> 3) & k) == k
+        group_allow |= v
+      end
+      if (mode & k) == k
+        other_allow |= v
+      end
+    end
+
+    if (mode & S_ISVTX).nonzero?
+      nobody_allow |= FILE::FILE_APPEND_DATA;
+    end
+
+    # caller is NOT managing SYSTEM by using group or owner, so set to FULL
+    if ! [sd.owner, sd.group].include? well_known_system_sid
+      # we don't check S_ISYSTEM_MISSING bit, but automatically carry over existing SYSTEM perms
+      # by default set SYSTEM perms to full
+      system_allow = FILE::FILE_ALL_ACCESS
+    end
+
+    isdir = File.directory?(path)
+
+    if isdir
+      if (mode & (S_IWUSR | S_IXUSR)) == (S_IWUSR | S_IXUSR)
+        owner_allow |= FILE::FILE_DELETE_CHILD
+      end
+      if (mode & (S_IWGRP | S_IXGRP)) == (S_IWGRP | S_IXGRP) && (mode & S_ISVTX) == 0
+        group_allow |= FILE::FILE_DELETE_CHILD
+      end
+      if (mode & (S_IWOTH | S_IXOTH)) == (S_IWOTH | S_IXOTH) && (mode & S_ISVTX) == 0
+        other_allow |= FILE::FILE_DELETE_CHILD
+      end
+    end
+
+    # if owner and group the same, then map group permissions to the one owner ACE
+    isownergroup = sd.owner == sd.group
+    if isownergroup
+      owner_allow |= group_allow
+    end
+
+    # if any ACE allows write, then clear readonly bit, but do this before we overwrite
+    # the DACl and lose our ability to set the attribute
+    if ((owner_allow | group_allow | other_allow ) & FILE::FILE_WRITE_DATA) == FILE::FILE_WRITE_DATA
+      FILE.remove_attributes(path, FILE::FILE_ATTRIBUTE_READONLY)
+    end
+
+    dacl = Puppet::Util::Windows::AccessControlList.new
+    dacl.allow(sd.owner, owner_allow)
+    unless isownergroup
+      dacl.allow(sd.group, group_allow)
+    end
+    dacl.allow(well_known_world_sid, other_allow)
+    dacl.allow(well_known_nobody_sid, nobody_allow)
+
+    # TODO: system should be first?
+    flags = !isdir ? 0 :
+      Puppet::Util::Windows::AccessControlEntry::CONTAINER_INHERIT_ACE |
+      Puppet::Util::Windows::AccessControlEntry::OBJECT_INHERIT_ACE
+    dacl.allow(well_known_system_sid, system_allow, flags)
+
+    # add inherit-only aces for child dirs and files that are created within the dir
+    inherit_only = Puppet::Util::Windows::AccessControlEntry::INHERIT_ONLY_ACE
+    if isdir
+      inherit = inherit_only | Puppet::Util::Windows::AccessControlEntry::CONTAINER_INHERIT_ACE
+      dacl.allow(Puppet::Util::Windows::SID::CreatorOwner, owner_allow, inherit)
+      dacl.allow(Puppet::Util::Windows::SID::CreatorGroup, group_allow, inherit)
+
+      inherit = inherit_only | Puppet::Util::Windows::AccessControlEntry::OBJECT_INHERIT_ACE
+      dacl.allow(Puppet::Util::Windows::SID::CreatorOwner, owner_allow & ~FILE::FILE_EXECUTE, inherit)
+      dacl.allow(Puppet::Util::Windows::SID::CreatorGroup, group_allow & ~FILE::FILE_EXECUTE, inherit)
+    end
+
+    new_sd = Puppet::Util::Windows::SecurityDescriptor.new(sd.owner, sd.group, dacl, protected)
+    set_security_descriptor(path, new_sd)
+
+    nil
+  end
+
+  ACL_REVISION                   = 2
+
+  def add_access_allowed_ace(acl, mask, sid, inherit = nil)
+    inherit ||= NO_INHERITANCE
+
+    Puppet::Util::Windows::SID.string_to_sid_ptr(sid) do |sid_ptr|
+      if Puppet::Util::Windows::SID.IsValidSid(sid_ptr) == FFI::WIN32_FALSE
+        raise Puppet::Util::Windows::Error.new(_("Invalid SID"))
+      end
+
+      if AddAccessAllowedAceEx(acl, ACL_REVISION, inherit, mask, sid_ptr) == FFI::WIN32_FALSE
+        raise Puppet::Util::Windows::Error.new(_("Failed to add access control entry"))
+      end
+    end
+
+    # ensure this method is void if it doesn't raise
+    nil
+  end
+
+  def add_access_denied_ace(acl, mask, sid, inherit = nil)
+    inherit ||= NO_INHERITANCE
+
+    Puppet::Util::Windows::SID.string_to_sid_ptr(sid) do |sid_ptr|
+      if Puppet::Util::Windows::SID.IsValidSid(sid_ptr) == FFI::WIN32_FALSE
+        raise Puppet::Util::Windows::Error.new(_("Invalid SID"))
+      end
+
+      if AddAccessDeniedAceEx(acl, ACL_REVISION, inherit, mask, sid_ptr) == FFI::WIN32_FALSE
+        raise Puppet::Util::Windows::Error.new(_("Failed to add access control entry"))
+      end
+    end
+
+    # ensure this method is void if it doesn't raise
+    nil
+  end
+
+  def parse_dacl(dacl_ptr)
+    # REMIND: need to handle NULL DACL
+    if IsValidAcl(dacl_ptr) == FFI::WIN32_FALSE
+      raise Puppet::Util::Windows::Error.new(_("Invalid DACL"))
+    end
+
+    dacl_struct = ACL.new(dacl_ptr)
+    ace_count = dacl_struct[:AceCount]
+
+    dacl = Puppet::Util::Windows::AccessControlList.new
+
+    # deny all
+    return dacl if ace_count == 0
+
+    0.upto(ace_count - 1) do |i|
+      FFI::MemoryPointer.new(:pointer, 1) do |ace_ptr|
+
+        next if GetAce(dacl_ptr, i, ace_ptr) == FFI::WIN32_FALSE
+
+        # ACE structures vary depending on the type. We are only concerned with
+        # ACCESS_ALLOWED_ACE and ACCESS_DENIED_ACEs, which have the same layout
+        ace = GENERIC_ACCESS_ACE.new(ace_ptr.get_pointer(0)) #deref LPVOID *
+
+        ace_type = ace[:Header][:AceType]
+        if ace_type != Puppet::Util::Windows::AccessControlEntry::ACCESS_ALLOWED_ACE_TYPE &&
+          ace_type != Puppet::Util::Windows::AccessControlEntry::ACCESS_DENIED_ACE_TYPE
+          Puppet.warning _("Unsupported access control entry type: 0x%{type}") % { type: ace_type.to_s(16) }
+          next
+        end
+
+        # using pointer addition gives the FFI::Pointer a size, but that's OK here
+        sid = Puppet::Util::Windows::SID.sid_ptr_to_string(ace.pointer + GENERIC_ACCESS_ACE.offset_of(:SidStart))
+        mask = ace[:Mask]
+        ace_flags = ace[:Header][:AceFlags]
+
+        case ace_type
+        when Puppet::Util::Windows::AccessControlEntry::ACCESS_ALLOWED_ACE_TYPE
+          dacl.allow(sid, mask, ace_flags)
+        when Puppet::Util::Windows::AccessControlEntry::ACCESS_DENIED_ACE_TYPE
+          dacl.deny(sid, mask, ace_flags)
+        end
+      end
+    end
+
+    dacl
+  end
+
+  # Open an existing file with the specified access mode, and execute a
+  # block with the opened file HANDLE.
+  def open_file(path, access, &block)
+    handle = CreateFileW(
+             wide_string(path),
+             access,
+             FILE::FILE_SHARE_READ | FILE::FILE_SHARE_WRITE,
+             FFI::Pointer::NULL, # security_attributes
+             FILE::OPEN_EXISTING,
+             FILE::FILE_FLAG_OPEN_REPARSE_POINT | FILE::FILE_FLAG_BACKUP_SEMANTICS,
+             FFI::Pointer::NULL_HANDLE) # template
+
+    if handle == Puppet::Util::Windows::File::INVALID_HANDLE_VALUE
+      raise Puppet::Util::Windows::Error.new(_("Failed to open '%{path}'") % { path: path })
+    end
+
+    begin
+      yield handle
+    ensure
+      FFI::WIN32.CloseHandle(handle) if handle
+    end
+
+    # handle has already had CloseHandle called against it, nothing to return
+    nil
+  end
+
+  # Execute a block with the specified privilege enabled
+  def with_privilege(privilege, &block)
+    set_privilege(privilege, true)
+    yield
+  ensure
+    set_privilege(privilege, false)
+  end
+
+  SE_PRIVILEGE_ENABLED    = 0x00000002
+  TOKEN_ADJUST_PRIVILEGES = 0x0020
+
+  # Enable or disable a privilege. Note this doesn't add any privileges the
+  # user doesn't already has, it just enables privileges that are disabled.
+  def set_privilege(privilege, enable)
+    return unless Puppet.features.root?
+
+    Puppet::Util::Windows::Process.with_process_token(TOKEN_ADJUST_PRIVILEGES) do |token|
+      Puppet::Util::Windows::Process.lookup_privilege_value(privilege) do |luid|
+        FFI::MemoryPointer.new(Puppet::Util::Windows::Process::LUID_AND_ATTRIBUTES.size) do |luid_and_attributes_ptr|
+          # allocate unmanaged memory for structs that we clean up afterwards
+          luid_and_attributes = Puppet::Util::Windows::Process::LUID_AND_ATTRIBUTES.new(luid_and_attributes_ptr)
+          luid_and_attributes[:Luid] = luid
+          luid_and_attributes[:Attributes] = enable ? SE_PRIVILEGE_ENABLED : 0
+
+          FFI::MemoryPointer.new(Puppet::Util::Windows::Process::TOKEN_PRIVILEGES.size) do |token_privileges_ptr|
+            token_privileges = Puppet::Util::Windows::Process::TOKEN_PRIVILEGES.new(token_privileges_ptr)
+            token_privileges[:PrivilegeCount] = 1
+            token_privileges[:Privileges][0] = luid_and_attributes
+
+            # size is correct given we only have 1 LUID, otherwise would be:
+            # [:PrivilegeCount].size + [:PrivilegeCount] * LUID_AND_ATTRIBUTES.size
+            if AdjustTokenPrivileges(token, FFI::WIN32_FALSE,
+                token_privileges, token_privileges.size,
+                FFI::MemoryPointer::NULL, FFI::MemoryPointer::NULL) == FFI::WIN32_FALSE
+              raise Puppet::Util::Windows::Error.new(_("Failed to adjust process privileges"))
+            end
+          end
+        end
+      end
+    end
+
+    # token / luid structs freed by this point, so return true as nothing raised
+    true
+  end
+
+  def get_security_descriptor(path)
+    sd = nil
+
+    with_privilege(SE_BACKUP_NAME) do
+      open_file(path, READ_CONTROL) do |handle|
+        FFI::MemoryPointer.new(:pointer, 1) do |owner_sid_ptr_ptr|
+          FFI::MemoryPointer.new(:pointer, 1) do |group_sid_ptr_ptr|
+            FFI::MemoryPointer.new(:pointer, 1) do |dacl_ptr_ptr|
+              FFI::MemoryPointer.new(:pointer, 1) do |sd_ptr_ptr|
+
+                rv = GetSecurityInfo(
+                  handle,
+                  :SE_FILE_OBJECT,
+                  OWNER_SECURITY_INFORMATION | GROUP_SECURITY_INFORMATION | DACL_SECURITY_INFORMATION,
+                  owner_sid_ptr_ptr,
+                  group_sid_ptr_ptr,
+                  dacl_ptr_ptr,
+                  FFI::Pointer::NULL, #sacl
+                  sd_ptr_ptr) #sec desc
+                raise Puppet::Util::Windows::Error.new(_("Failed to get security information")) if rv != FFI::ERROR_SUCCESS
+
+                # these 2 convenience params are not freed since they point inside sd_ptr
+                owner = Puppet::Util::Windows::SID.sid_ptr_to_string(owner_sid_ptr_ptr.get_pointer(0))
+                group = Puppet::Util::Windows::SID.sid_ptr_to_string(group_sid_ptr_ptr.get_pointer(0))
+
+                FFI::MemoryPointer.new(:word, 1) do |control|
+                  FFI::MemoryPointer.new(:dword, 1) do |revision|
+                    sd_ptr_ptr.read_win32_local_pointer do |sd_ptr|
+
+                      if GetSecurityDescriptorControl(sd_ptr, control, revision) == FFI::WIN32_FALSE
+                        raise Puppet::Util::Windows::Error.new(_("Failed to get security descriptor control"))
+                      end
+
+                      protect = (control.read_word & SE_DACL_PROTECTED) == SE_DACL_PROTECTED
+                      dacl = parse_dacl(dacl_ptr_ptr.get_pointer(0))
+                      sd = Puppet::Util::Windows::SecurityDescriptor.new(owner, group, dacl, protect)
+                    end
+                  end
+                end
+              end
+            end
+          end
+        end
+      end
+    end
+
+    sd
+  end
+
+  def get_max_generic_acl_size(ace_count)
+    # https://msdn.microsoft.com/en-us/library/windows/desktop/aa378853(v=vs.85).aspx
+    # To calculate the initial size of an ACL, add the following together, and then align the result to the nearest DWORD:
+    # * Size of the ACL structure.
+    # * Size of each ACE structure that the ACL is to contain minus the SidStart member (DWORD) of the ACE.
+    # * Length of the SID that each ACE is to contain.
+    ACL.size + ace_count * MAXIMUM_GENERIC_ACE_SIZE
+  end
+
+  # setting DACL requires both READ_CONTROL and WRITE_DACL access rights,
+  # and their respective privileges, SE_BACKUP_NAME and SE_RESTORE_NAME.
+  def set_security_descriptor(path, sd)
+    FFI::MemoryPointer.new(:byte, get_max_generic_acl_size(sd.dacl.count)) do |acl_ptr|
+      if InitializeAcl(acl_ptr, acl_ptr.size, ACL_REVISION) == FFI::WIN32_FALSE
+        raise Puppet::Util::Windows::Error.new(_("Failed to initialize ACL"))
+      end
+
+      if IsValidAcl(acl_ptr) == FFI::WIN32_FALSE
+        raise Puppet::Util::Windows::Error.new(_("Invalid DACL"))
+      end
+
+      with_privilege(SE_BACKUP_NAME) do
+        with_privilege(SE_RESTORE_NAME) do
+          open_file(path, READ_CONTROL | WRITE_DAC | WRITE_OWNER) do |handle|
+            Puppet::Util::Windows::SID.string_to_sid_ptr(sd.owner) do |owner_sid_ptr|
+              Puppet::Util::Windows::SID.string_to_sid_ptr(sd.group) do |group_sid_ptr|
+                sd.dacl.each do |ace|
+                  case ace.type
+                  when Puppet::Util::Windows::AccessControlEntry::ACCESS_ALLOWED_ACE_TYPE
+                    #puts "ace: allow, sid #{Puppet::Util::Windows::SID.sid_to_name(ace.sid)}, mask 0x#{ace.mask.to_s(16)}"
+                    add_access_allowed_ace(acl_ptr, ace.mask, ace.sid, ace.flags)
+                  when Puppet::Util::Windows::AccessControlEntry::ACCESS_DENIED_ACE_TYPE
+                    #puts "ace: deny, sid #{Puppet::Util::Windows::SID.sid_to_name(ace.sid)}, mask 0x#{ace.mask.to_s(16)}"
+                    add_access_denied_ace(acl_ptr, ace.mask, ace.sid, ace.flags)
+                  else
+                    raise "We should never get here"
+                    # TODO: this should have been a warning in an earlier commit
+                  end
+                end
+
+                # protected means the object does not inherit aces from its parent
+                flags = OWNER_SECURITY_INFORMATION | GROUP_SECURITY_INFORMATION | DACL_SECURITY_INFORMATION
+                flags |= sd.protect ? PROTECTED_DACL_SECURITY_INFORMATION : UNPROTECTED_DACL_SECURITY_INFORMATION
+
+                rv = SetSecurityInfo(handle,
+                                     :SE_FILE_OBJECT,
+                                     flags,
+                                     owner_sid_ptr,
+                                     group_sid_ptr,
+                                     acl_ptr,
+                                     FFI::MemoryPointer::NULL)
+
+                if rv != FFI::ERROR_SUCCESS
+                  raise Puppet::Util::Windows::Error.new(_("Failed to set security information"))
+                end
+              end
+            end
+          end
+        end
+      end
+    end
+  end
+
+  ffi_convention :stdcall
+
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa363858(v=vs.85).aspx
+  # HANDLE WINAPI CreateFile(
+  #   _In_      LPCTSTR lpFileName,
+  #   _In_      DWORD dwDesiredAccess,
+  #   _In_      DWORD dwShareMode,
+  #   _In_opt_  LPSECURITY_ATTRIBUTES lpSecurityAttributes,
+  #   _In_      DWORD dwCreationDisposition,
+  #   _In_      DWORD dwFlagsAndAttributes,
+  #   _In_opt_  HANDLE hTemplateFile
+  # );
+  ffi_lib :kernel32
+  attach_function_private :CreateFileW,
+    [:lpcwstr, :dword, :dword, :pointer, :dword, :dword, :handle], :handle
+
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa364993(v=vs.85).aspx
+  # BOOL WINAPI GetVolumeInformation(
+  #   _In_opt_   LPCTSTR lpRootPathName,
+  #   _Out_opt_  LPTSTR lpVolumeNameBuffer,
+  #   _In_       DWORD nVolumeNameSize,
+  #   _Out_opt_  LPDWORD lpVolumeSerialNumber,
+  #   _Out_opt_  LPDWORD lpMaximumComponentLength,
+  #   _Out_opt_  LPDWORD lpFileSystemFlags,
+  #   _Out_opt_  LPTSTR lpFileSystemNameBuffer,
+  #   _In_       DWORD nFileSystemNameSize
+  # );
+  ffi_lib :kernel32
+  attach_function_private :GetVolumeInformationW,
+    [:lpcwstr, :lpwstr, :dword, :lpdword, :lpdword, :lpdword, :lpwstr, :dword], :win32_bool
+
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa374951(v=vs.85).aspx
+  # BOOL WINAPI AddAccessAllowedAceEx(
+  #   _Inout_  PACL pAcl,
+  #   _In_     DWORD dwAceRevision,
+  #   _In_     DWORD AceFlags,
+  #   _In_     DWORD AccessMask,
+  #   _In_     PSID pSid
+  # );
+  ffi_lib :advapi32
+  attach_function_private :AddAccessAllowedAceEx,
+    [:pointer, :dword, :dword, :dword, :pointer], :win32_bool
+
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa374964(v=vs.85).aspx
+  # BOOL WINAPI AddAccessDeniedAceEx(
+  #   _Inout_  PACL pAcl,
+  #   _In_     DWORD dwAceRevision,
+  #   _In_     DWORD AceFlags,
+  #   _In_     DWORD AccessMask,
+  #   _In_     PSID pSid
+  # );
+  ffi_lib :advapi32
+  attach_function_private :AddAccessDeniedAceEx,
+    [:pointer, :dword, :dword, :dword, :pointer], :win32_bool
+
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa374931(v=vs.85).aspx
+  # typedef struct _ACL {
+  #   BYTE AclRevision;
+  #   BYTE Sbz1;
+  #   WORD AclSize;
+  #   WORD AceCount;
+  #   WORD Sbz2;
+  # } ACL, *PACL;
+  class ACL < FFI::Struct
+    layout :AclRevision, :byte,
+           :Sbz1, :byte,
+           :AclSize, :word,
+           :AceCount, :word,
+           :Sbz2, :word
+  end
+
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa374912(v=vs.85).aspx
+  # ACE types
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa374919(v=vs.85).aspx
+  # typedef struct _ACE_HEADER {
+  #   BYTE AceType;
+  #   BYTE AceFlags;
+  #   WORD AceSize;
+  # } ACE_HEADER, *PACE_HEADER;
+  class ACE_HEADER < FFI::Struct
+    layout :AceType, :byte,
+           :AceFlags, :byte,
+           :AceSize,  :word
+  end
+
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa374892(v=vs.85).aspx
+  # ACCESS_MASK
+
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa374847(v=vs.85).aspx
+  # typedef struct _ACCESS_ALLOWED_ACE {
+  #   ACE_HEADER  Header;
+  #   ACCESS_MASK Mask;
+  #   DWORD       SidStart;
+  # } ACCESS_ALLOWED_ACE, *PACCESS_ALLOWED_ACE;
+  #
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa374879(v=vs.85).aspx
+  # typedef struct _ACCESS_DENIED_ACE {
+  #   ACE_HEADER  Header;
+  #   ACCESS_MASK Mask;
+  #   DWORD       SidStart;
+  # } ACCESS_DENIED_ACE, *PACCESS_DENIED_ACE;
+  class GENERIC_ACCESS_ACE < FFI::Struct
+    # ACE structures must be aligned on DWORD boundaries. All Windows
+    # memory-management functions return DWORD-aligned handles to memory
+    pack 4
+    layout :Header, ACE_HEADER,
+           :Mask, :dword,
+           :SidStart, :dword
+  end
+
+  # https://stackoverflow.com/a/1792930
+  MAXIMUM_SID_BYTES_LENGTH = 68
+  MAXIMUM_GENERIC_ACE_SIZE = GENERIC_ACCESS_ACE.offset_of(:SidStart) +
+    MAXIMUM_SID_BYTES_LENGTH
+
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa446634(v=vs.85).aspx
+  # BOOL WINAPI GetAce(
+  #   _In_   PACL pAcl,
+  #   _In_   DWORD dwAceIndex,
+  #   _Out_  LPVOID *pAce
+  # );
+  ffi_lib :advapi32
+  attach_function_private :GetAce,
+    [:pointer, :dword, :pointer], :win32_bool
+
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa375202(v=vs.85).aspx
+  # BOOL WINAPI AdjustTokenPrivileges(
+  #   _In_       HANDLE TokenHandle,
+  #   _In_       BOOL DisableAllPrivileges,
+  #   _In_opt_   PTOKEN_PRIVILEGES NewState,
+  #   _In_       DWORD BufferLength,
+  #   _Out_opt_  PTOKEN_PRIVILEGES PreviousState,
+  #   _Out_opt_  PDWORD ReturnLength
+  # );
+  ffi_lib :advapi32
+  attach_function_private :AdjustTokenPrivileges,
+    [:handle, :win32_bool, :pointer, :dword, :pointer, :pdword], :win32_bool
+
+  # https://msdn.microsoft.com/en-us/library/windows/hardware/ff556610(v=vs.85).aspx
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa379561(v=vs.85).aspx
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa446647(v=vs.85).aspx
+  # typedef WORD SECURITY_DESCRIPTOR_CONTROL, *PSECURITY_DESCRIPTOR_CONTROL;
+  # BOOL WINAPI GetSecurityDescriptorControl(
+  #   _In_   PSECURITY_DESCRIPTOR pSecurityDescriptor,
+  #   _Out_  PSECURITY_DESCRIPTOR_CONTROL pControl,
+  #   _Out_  LPDWORD lpdwRevision
+  # );
+  ffi_lib :advapi32
+  attach_function_private :GetSecurityDescriptorControl,
+    [:pointer, :lpword, :lpdword], :win32_bool
+
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa378853(v=vs.85).aspx
+  # BOOL WINAPI InitializeAcl(
+  #   _Out_  PACL pAcl,
+  #   _In_   DWORD nAclLength,
+  #   _In_   DWORD dwAclRevision
+  # );
+  ffi_lib :advapi32
+  attach_function_private :InitializeAcl,
+    [:pointer, :dword, :dword], :win32_bool
+
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa379142(v=vs.85).aspx
+  # BOOL WINAPI IsValidAcl(
+  #   _In_  PACL pAcl
+  # );
+  ffi_lib :advapi32
+  attach_function_private :IsValidAcl,
+    [:pointer], :win32_bool
+
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa379593(v=vs.85).aspx
+  SE_OBJECT_TYPE = enum(
+    :SE_UNKNOWN_OBJECT_TYPE, 0,
+    :SE_FILE_OBJECT,
+    :SE_SERVICE,
+    :SE_PRINTER,
+    :SE_REGISTRY_KEY,
+    :SE_LMSHARE,
+    :SE_KERNEL_OBJECT,
+    :SE_WINDOW_OBJECT,
+    :SE_DS_OBJECT,
+    :SE_DS_OBJECT_ALL,
+    :SE_PROVIDER_DEFINED_OBJECT,
+    :SE_WMIGUID_OBJECT,
+    :SE_REGISTRY_WOW64_32KEY
+  )
+
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa446654(v=vs.85).aspx
+  # DWORD WINAPI GetSecurityInfo(
+  #   _In_       HANDLE handle,
+  #   _In_       SE_OBJECT_TYPE ObjectType,
+  #   _In_       SECURITY_INFORMATION SecurityInfo,
+  #   _Out_opt_  PSID *ppsidOwner,
+  #   _Out_opt_  PSID *ppsidGroup,
+  #   _Out_opt_  PACL *ppDacl,
+  #   _Out_opt_  PACL *ppSacl,
+  #   _Out_opt_  PSECURITY_DESCRIPTOR *ppSecurityDescriptor
+  # );
+  ffi_lib :advapi32
+  attach_function_private :GetSecurityInfo,
+    [:handle, SE_OBJECT_TYPE, :dword, :pointer, :pointer, :pointer, :pointer, :pointer], :dword
+
+  # https://msdn.microsoft.com/en-us/library/windows/desktop/aa379588(v=vs.85).aspx
+  # DWORD WINAPI SetSecurityInfo(
+  #   _In_      HANDLE handle,
+  #   _In_      SE_OBJECT_TYPE ObjectType,
+  #   _In_      SECURITY_INFORMATION SecurityInfo,
+  #   _In_opt_  PSID psidOwner,
+  #   _In_opt_  PSID psidGroup,
+  #   _In_opt_  PACL pDacl,
+  #   _In_opt_  PACL pSacl
+  # );
+  ffi_lib :advapi32
+  # TODO: SECURITY_INFORMATION is actually a bitmask the size of a DWORD
+  attach_function_private :SetSecurityInfo,
+    [:handle, SE_OBJECT_TYPE, :dword, :pointer, :pointer, :pointer, :pointer], :dword
+end