andyh-deprec 1.99.26

data/lib/deprec/templates/nagios/nagios_apache_vhost.conf.erb

@@ -0,0 +1,45 @@
+<VirtualHost *:80>
+        ServerName <%= domain %>
+        DocumentRoot "/usr/local/nagios/share"
+        ScriptAlias /nagios/cgi-bin "/usr/local/nagios/sbin"
+        Alias /nagios "/usr/local/nagios/share"
+
+        <Directory "/usr/local/nagios/sbin">
+        #  SSLRequireSSL
+           Options ExecCGI
+           AllowOverride None
+           Order allow,deny
+           Allow from all
+        #  Order deny,allow
+        #  Deny from all
+        #  Allow from 127.0.0.1
+           AuthName "Nagios Access"
+           AuthType Basic
+           AuthUserFile /usr/local/nagios/etc/htpasswd.users
+           Require valid-user
+        </Directory>
+
+        <Directory "/usr/local/nagios/share">
+        #  SSLRequireSSL
+           Options None
+           AllowOverride None
+           Order allow,deny
+           Allow from all
+        #  Order deny,allow
+        #  Deny from all
+        #  Allow from 127.0.0.1
+           AuthName "Nagios Access"
+           AuthType Basic
+           AuthUserFile /usr/local/nagios/etc/htpasswd.users
+           Require valid-user
+        </Directory>
+
+        # Deflate
+        AddOutputFilterByType DEFLATE text/html text/plain text/xml text/css application/x-javascript
+        BrowserMatch ^Mozilla/4 gzip-only-text/html
+        BrowserMatch ^Mozilla/4\.0[678] no-gzip
+        BrowserMatch \bMSIE !no-gzip !gzip-only-text/html
+
+        ErrorLog logs/nagios.sct-error_log
+        CustomLog logs/nagios.sct-access_log combined
+</VirtualHost>

data/lib/deprec/templates/nagios/nrpe.cfg.erb

@@ -0,0 +1,210 @@
+#############################################################################
+# Sample NRPE Config File 
+# Written by: Ethan Galstad (nagios@nagios.org)
+# 
+# Last Modified: 03-09-2007
+#
+# NOTES:
+# This is a sample configuration file for the NRPE daemon.  It needs to be
+# located on the remote host that is running the NRPE daemon, not the host
+# from which the check_nrpe client is being executed.
+#############################################################################
+
+
+# PID FILE
+# The name of the file in which the NRPE daemon should write it's process ID
+# number.  The file is only written if the NRPE daemon is started by the root
+# user and is running in standalone mode.
+
+pid_file=/var/run/nrpe.pid
+
+
+
+# PORT NUMBER
+# Port number we should wait for connections on.
+# NOTE: This must be a non-priviledged port (i.e. > 1024).
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+server_port=5666
+
+
+
+# SERVER ADDRESS
+# Address that nrpe should bind to in case there are more than one interface
+# and you do not want nrpe to bind on all interfaces.
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+#server_address=127.0.0.1
+
+
+
+# NRPE USER
+# This determines the effective user that the NRPE daemon should run as.  
+# You can either supply a username or a UID.
+# 
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+nrpe_user=nagios
+
+
+
+# NRPE GROUP
+# This determines the effective group that the NRPE daemon should run as.  
+# You can either supply a group name or a GID.
+# 
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+nrpe_group=nagios
+
+
+
+# ALLOWED HOST ADDRESSES
+# This is an optional comma-delimited list of IP address or hostnames 
+# that are allowed to talk to the NRPE daemon.
+#
+# Note: The daemon only does rudimentary checking of the client's IP
+# address.  I would highly recommend adding entries in your /etc/hosts.allow
+# file to allow only the specified host to connect to the port
+# you are running this daemon on.
+#
+# NOTE: This option is ignored if NRPE is running under either inetd or xinetd
+
+allowed_hosts=127.0.0.1
+ 
+
+
+# COMMAND ARGUMENT PROCESSING
+# This option determines whether or not the NRPE daemon will allow clients
+# to specify arguments to commands that are executed.  This option only works
+# if the daemon was configured with the --enable-command-args configure script
+# option.  
+#
+# *** ENABLING THIS OPTION IS A SECURITY RISK! *** 
+# Read the SECURITY file for information on some of the security implications
+# of enabling this variable.
+#
+# Values: 0=do not allow arguments, 1=allow command arguments
+
+dont_blame_nrpe=0
+
+
+
+# COMMAND PREFIX
+# This option allows you to prefix all commands with a user-defined string.
+# A space is automatically added between the specified prefix string and the
+# command line from the command definition.
+#
+# *** THIS EXAMPLE MAY POSE A POTENTIAL SECURITY RISK, SO USE WITH CAUTION! ***
+# Usage scenario: 
+# Execute restricted commmands using sudo.  For this to work, you need to add
+# the nagios user to your /etc/sudoers.  An example entry for alllowing 
+# execution of the plugins from might be:
+#
+# nagios          ALL=(ALL) NOPASSWD: /usr/lib/nagios/plugins/
+#
+# This lets the nagios user run all commands in that directory (and only them)
+# without asking for a password.  If you do this, make sure you don't give
+# random users write access to that directory or its contents!
+
+# command_prefix=/usr/bin/sudo 
+
+
+
+# DEBUGGING OPTION
+# This option determines whether or not debugging messages are logged to the
+# syslog facility.
+# Values: 0=debugging off, 1=debugging on
+
+debug=0
+
+
+
+# COMMAND TIMEOUT
+# This specifies the maximum number of seconds that the NRPE daemon will
+# allow plugins to finish executing before killing them off.
+
+command_timeout=60
+
+
+
+# CONNECTION TIMEOUT
+# This specifies the maximum number of seconds that the NRPE daemon will
+# wait for a connection to be established before exiting. This is sometimes
+# seen where a network problem stops the SSL being established even though
+# all network sessions are connected. This causes the nrpe daemons to
+# accumulate, eating system resources. Do not set this too low.
+
+connection_timeout=300
+
+
+
+# WEEK RANDOM SEED OPTION
+# This directive allows you to use SSL even if your system does not have
+# a /dev/random or /dev/urandom (on purpose or because the necessary patches
+# were not applied). The random number generator will be seeded from a file
+# which is either a file pointed to by the environment valiable $RANDFILE
+# or $HOME/.rnd. If neither exists, the pseudo random number generator will
+# be initialized and a warning will be issued.
+# Values: 0=only seed from /dev/[u]random, 1=also seed from weak randomness
+
+#allow_weak_random_seed=1
+
+
+
+# INCLUDE CONFIG FILE
+# This directive allows you to include definitions from an external config file.
+
+#include=<somefile.cfg>
+
+
+
+# INCLUDE CONFIG DIRECTORY
+# This directive allows you to include definitions from config files (with a
+# .cfg extension) in one or more directories (with recursion).
+
+#include_dir=<somedirectory>
+#include_dir=<someotherdirectory>
+
+
+
+# COMMAND DEFINITIONS
+# Command definitions that this daemon will run.  Definitions
+# are in the following format:
+#
+# command[<command_name>]=<command_line>
+#
+# When the daemon receives a request to return the results of <command_name>
+# it will execute the command specified by the <command_line> argument.
+#
+# Unlike Nagios, the command line cannot contain macros - it must be
+# typed exactly as it should be executed.
+#
+# Note: Any plugins that are used in the command lines must reside
+# on the machine that this daemon is running on!  The examples below
+# assume that you have plugins installed in a /usr/local/nagios/libexec
+# directory.  Also note that you will have to modify the definitions below
+# to match the argument format the plugins expect.  Remember, these are
+# examples only!
+
+
+# The following examples use hardcoded command arguments...
+
+command[check_users]=/usr/local/nagios/libexec/check_users -w 5 -c 10
+command[check_load]=/usr/local/nagios/libexec/check_load -w 15,10,5 -c 30,25,20
+command[check_hda1]=/usr/local/nagios/libexec/check_disk -w 20% -c 10% -p /dev/hda1
+command[check_zombie_procs]=/usr/local/nagios/libexec/check_procs -w 5 -c 10 -s Z
+command[check_total_procs]=/usr/local/nagios/libexec/check_procs -w 150 -c 200 
+command[check_memory]=/usr/local/nagios/libexec/check_linux_free_memory.pl -w 10% -c 0% 
+
+
+
+# The following examples allow user-supplied arguments and can
+# only be used if the NRPE daemon was compiled with support for 
+# command arguments *AND* the dont_blame_nrpe directive in this
+# config file is set to '1'.  This poses a potential security risk, so
+# make sure you read the SECURITY file before doing this.
+
+#command[check_users]=/usr/local/nagios/libexec/check_users -w $ARG1$ -c $ARG2$
+#command[check_load]=/usr/local/nagios/libexec/check_load -w $ARG1$ -c $ARG2$
+#command[check_disk]=/usr/local/nagios/libexec/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
+#command[check_procs]=/usr/local/nagios/libexec/check_procs -w $ARG1$ -c $ARG2$ -s $ARG3$

data/lib/deprec/templates/nagios/nrpe.xinetd.erb

@@ -0,0 +1,16 @@
+# default: on
+# description: NRPE (Nagios Remote Plugin Executor)
+service nrpe
+{
+        flags           = REUSE
+        socket_type     = stream    
+        port            = 5666    
+        wait            = no
+        user            = nagios
+        group           = nagios
+        server          = /usr/local/nagios/bin/nrpe
+        server_args     = -c /usr/local/nagios/etc/nrpe.cfg --inetd
+        log_on_failure  += USERID
+        disable         = no
+        only_from       = 127.0.0.1 <%= nagios_host %>
+}

data/lib/deprec/templates/nagios/resource.cfg.erb

@@ -0,0 +1,34 @@
+###########################################################################
+#
+# RESOURCE.CFG - Sample Resource File for Nagios 3.0b7
+#
+# Last Modified: 09-10-2003
+#
+# You can define $USERx$ macros in this file, which can in turn be used
+# in command definitions in your host config file(s).  $USERx$ macros are
+# useful for storing sensitive information such as usernames, passwords, 
+# etc.  They are also handy for specifying the path to plugins and 
+# event handlers - if you decide to move the plugins or event handlers to
+# a different directory in the future, you can just update one or two
+# $USERx$ macros, instead of modifying a lot of command definitions.
+#
+# The CGIs will not attempt to read the contents of resource files, so
+# you can set restrictive permissions (600 or 660) on them.
+#
+# Nagios supports up to 32 $USERx$ macros ($USER1$ through $USER32$)
+#
+# Resource files may also be used to store configuration directives for
+# external data sources like MySQL...
+#
+###########################################################################
+
+# Sets $USER1$ to be the path to the plugins
+$USER1$=/usr/local/nagios/libexec
+
+# Sets $USER2$ to be the path to event handlers
+#$USER2$=/usr/local/nagios/libexec/eventhandlers
+
+# Store some usernames and passwords (hidden from the CGIs)
+#$USER3$=someuser
+#$USER4$=somepassword
+

data/lib/deprec/templates/nagios/services.cfg.erb

@@ -0,0 +1,79 @@
+###############################################################################
+###############################################################################
+#
+# SERVICES
+#
+###############################################################################
+###############################################################################
+
+define service{ 
+	use generic-service 
+	hostgroup_name servers 
+	service_description Swap 
+	servicegroups memory
+	check_command check_nrpe!check_swap 
+}
+
+define service{ 
+	use generic-service 
+	hostgroup_name servers 
+	service_description CPU 
+	check_command check_nrpe!check_load 
+} 
+
+define service{ 
+	use generic-service 
+	hostgroup_name servers 
+	servicegroups disk
+	service_description Disk 
+	check_command check_nrpe!check_sda1 
+}
+
+###############################################################################
+###############################################################################
+#
+# SERVICE TEMPLATES
+#
+###############################################################################
+###############################################################################
+
+# Generic service definition template - This is NOT a real service, just a template!
+
+define service{
+        name                            generic-service 	; The 'name' of this service template
+        active_checks_enabled           1       		; Active service checks are enabled
+        passive_checks_enabled          1    		   	; Passive service checks are enabled/accepted
+        parallelize_check               1       		; Active service checks should be parallelized (disabling this can lead to major performance problems)
+        obsess_over_service             1       		; We should obsess over this service (if necessary)
+        check_freshness                 0       		; Default is to NOT check service 'freshness'
+        notifications_enabled           1       		; Service notifications are enabled
+        event_handler_enabled           1       		; Service event handler is enabled
+        flap_detection_enabled          1       		; Flap detection is enabled
+        failure_prediction_enabled      1       		; Failure prediction is enabled
+        process_perf_data               1       		; Process performance data
+        retain_status_information       1       		; Retain status information across program restarts
+        retain_nonstatus_information    1       		; Retain non-status information across program restarts
+        is_volatile                     0       		; The service is not volatile
+        check_period                    24x7			; The service can be checked at any time of the day
+        max_check_attempts              3			; Re-check the service up to 3 times in order to determine its final (hard) state
+        normal_check_interval           10			; Check the service every 10 minutes under normal conditions
+        retry_check_interval            2			; Re-check the service every two minutes until a hard state can be determined
+        contact_groups                  admins			; Notifications get sent out to everyone in the 'admins' group
+	notification_options		w,u,c,r			; Send notifications about warning, unknown, critical, and recovery events
+        notification_interval           60			; Re-notify about service problems every hour
+        notification_period             24x7			; Notifications can be sent out at any time
+         register                        0       		; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
+        }
+
+# Local service definition template - This is NOT a real service, just a template!
+
+define service{
+		name				local-service 		; The name of this service template
+		use				generic-service		; Inherit default values from the generic-service definition
+	        max_check_attempts              4			; Re-check the service up to 4 times in order to determine its final (hard) state
+	        normal_check_interval           5			; Check the service every 5 minutes under normal conditions
+	        retry_check_interval            1			; Re-check the service every minute until a hard state can be determined
+	        register                        0       		; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE!
+		}
+			
+

data/lib/deprec/templates/nagios/templates.cfg.erb

@@ -0,0 +1,9 @@
+
+
+
+
+
+
+
+
+

data/lib/deprec/templates/nagios/timeperiods.cfg.erb

@@ -0,0 +1,94 @@
+###############################################################################
+# TIMEPERIODS.CFG - SAMPLE TIMEPERIOD DEFINITIONS
+#
+# Last Modified: 05-31-2007
+#
+# NOTES: This config file provides you with some example timeperiod definitions
+#        that you can reference in host, service, contact, and dependency
+#        definitions.
+#       
+#        You don't need to keep timeperiods in a separate file from your other
+#        object definitions.  This has been done just to make things easier to
+#        understand.
+#
+###############################################################################
+
+
+
+###############################################################################
+###############################################################################
+#
+# TIME PERIODS
+#
+###############################################################################
+###############################################################################
+
+# This defines a timeperiod where all times are valid for checks, 
+# notifications, etc.  The classic "24x7" support nightmare. :-)
+define timeperiod{
+        timeperiod_name 24x7
+        alias           24 Hours A Day, 7 Days A Week
+        sunday          00:00-24:00
+        monday          00:00-24:00
+        tuesday         00:00-24:00
+        wednesday       00:00-24:00
+        thursday        00:00-24:00
+        friday          00:00-24:00
+        saturday        00:00-24:00
+        }
+
+
+# 'workhours' timeperiod definition
+define timeperiod{
+	timeperiod_name	workhours
+	alias		Normal Work Hours
+	monday		09:00-17:00
+	tuesday		09:00-17:00
+	wednesday	09:00-17:00
+	thursday	09:00-17:00
+	friday		09:00-17:00
+	}
+
+
+# 'none' timeperiod definition
+define timeperiod{
+	timeperiod_name	none
+	alias		No Time Is A Good Time
+	}
+
+
+# Some U.S. holidays
+# Note: The timeranges for each holiday are meant to *exclude* the holidays from being
+# treated as a valid time for notifications, etc.  You probably don't want your pager 
+# going off on New Year's.  Although you're employer might... :-)
+define timeperiod{
+	name			us-holidays
+        timeperiod_name         us-holidays
+        alias                   U.S. Holidays
+
+        january 1               00:00-00:00     ; New Years
+        monday -1 may           00:00-00:00     ; Memorial Day (last Monday in May)
+        july 4                  00:00-00:00     ; Independence Day
+        monday 1 september      00:00-00:00     ; Labor Day (first Monday in September)
+        thursday -1 november    00:00-00:00     ; Thanksgiving (last Thursday in November)
+        december 25             00:00-00:00     ; Christmas
+        }
+
+
+# This defines a modified "24x7" timeperiod that covers every day of the
+# year, except for U.S. holidays (defined in the timeperiod above).
+define timeperiod{
+        timeperiod_name 24x7_sans_holidays
+        alias           24x7 Sans Holidays
+
+	use		us-holidays		; Get holiday exceptions from other timeperiod
+
+        sunday          00:00-24:00
+        monday          00:00-24:00
+        tuesday         00:00-24:00
+        wednesday       00:00-24:00
+        thursday        00:00-24:00
+        friday          00:00-24:00
+        saturday        00:00-24:00
+        }
+

data/lib/deprec/templates/network/hostname.erb

@@ -0,0 +1 @@
+<%= network_hostname %>

data/lib/deprec/templates/network/hosts.erb

@@ -0,0 +1,2 @@
+127.0.0.1       localhost
+127.0.1.1       <%= network_hostname %>

data/lib/deprec/templates/network/interfaces.erb

@@ -0,0 +1,18 @@
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+<% network_number_of_ports.to_i.times do |port| %>
+# The primary network interface
+auto <%= "eth#{port}" %>
+iface <%= "eth#{port}" %> inet static
+        address <%= network_interfaces[port][:address] %>
+        netmask <%= network_interfaces[port][:netmask] %>
+        broadcast <%= network_interfaces[port][:broadcast] %>
+        <%= "gateway #{network_gateway}" if port == 0 %>
+        <%= "dns-nameservers #{network_dns_nameservers}" if port == 0 %>
+
+<% end %>

data/lib/deprec/templates/nginx/logrotate.conf.erb

@@ -0,0 +1,13 @@
+<%= shared_path %>/log/*access.log <%= shared_path %>/log/*error.log{
+        daily
+        missingok
+        compress
+        rotate 21
+        dateext
+        notifempty
+        sharedscripts
+        extension gz
+        postrotate
+          [ ! -f /usr/local/nginx/logs/nginx.pid ] || kill -USR1 `cat /usr/local/nginx/logs/nginx.pid`
+        endscript
+}

data/lib/deprec/templates/nginx/mime.types.erb

@@ -0,0 +1,70 @@
+
+types {
+    text/html                             html htm shtml;
+    text/css                              css;
+    text/xml                              xml rss;
+    image/gif                             gif;
+    image/jpeg                            jpeg jpg;
+    application/x-javascript              js;
+    application/atom+xml                  atom;
+
+    text/mathml                           mml;
+    text/plain                            txt;
+    text/vnd.sun.j2me.app-descriptor      jad;
+    text/vnd.wap.wml                      wml;
+    text/x-component                      htc;
+
+    image/png                             png;
+    image/tiff                            tif tiff;
+    image/vnd.wap.wbmp                    wbmp;
+    image/x-icon                          ico;
+    image/x-jng                           jng;
+    image/x-ms-bmp                        bmp;
+    image/svg+xml                         svg;
+
+    application/java-archive              jar war ear;
+    application/mac-binhex40              hqx;
+    application/msword                    doc;
+    application/pdf                       pdf;
+    application/postscript                ps eps ai;
+    application/rtf                       rtf;
+    application/vnd.ms-excel              xls;
+    application/vnd.ms-powerpoint         ppt;
+    application/vnd.wap.wmlc              wmlc;
+    application/vnd.wap.xhtml+xml         xhtml;
+    application/x-cocoa                   cco;
+    application/x-java-archive-diff       jardiff;
+    application/x-java-jnlp-file          jnlp;
+    application/x-makeself                run;
+    application/x-perl                    pl pm;
+    application/x-pilot                   prc pdb;
+    application/x-rar-compressed          rar;
+    application/x-redhat-package-manager  rpm;
+    application/x-sea                     sea;
+    application/x-shockwave-flash         swf;
+    application/x-stuffit                 sit;
+    application/x-tcl                     tcl tk;
+    application/x-x509-ca-cert            der pem crt;
+    application/x-xpinstall               xpi;
+    application/zip                       zip;
+
+    application/octet-stream              bin exe dll;
+    application/octet-stream              deb;
+    application/octet-stream              dmg;
+    application/octet-stream              eot;
+    application/octet-stream              iso img;
+    application/octet-stream              msi msp msm;
+
+    audio/midi                            mid midi kar;
+    audio/mpeg                            mp3;
+    audio/x-realaudio                     ra;
+
+    video/3gpp                            3gpp 3gp;
+    video/mpeg                            mpeg mpg;
+    video/quicktime                       mov;
+    video/x-flv                           flv;
+    video/x-mng                           mng;
+    video/x-ms-asf                        asx asf;
+    video/x-ms-wmv                        wmv;
+    video/x-msvideo                       avi;
+}

data/lib/deprec/templates/nginx/nginx-init-script

@@ -0,0 +1,62 @@
+#! /bin/sh
+
+### BEGIN INIT INFO
+# Provides:          nginx
+# Required-Start:    $all
+# Required-Stop:     $all
+# Default-Start:     2 3 4 5
+# Default-Stop:      0 1 6
+# Short-Description: starts the nginx web server
+# Description:       starts nginx using start-stop-daemon
+### END INIT INFO
+
+PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
+DAEMON=/usr/local/sbin/nginx
+NAME=nginx
+DESC=nginx
+
+test -x $DAEMON || exit 0
+
+# Include nginx defaults if available
+if [ -f /etc/default/nginx ] ; then
+        . /etc/default/nginx
+fi
+
+set -e
+
+case "$1" in
+  start)
+        echo -n "Starting $DESC: "
+        start-stop-daemon --start --quiet --pidfile /usr/local/nginx/logs/$NAME.pid \
+                --exec $DAEMON -- $DAEMON_OPTS
+        echo "$NAME."
+        ;;
+  stop)
+        echo -n "Stopping $DESC: "
+        start-stop-daemon --stop --quiet --pidfile /usr/local/nginx/logs/$NAME.pid \
+                --exec $DAEMON
+        echo "$NAME."
+        ;;
+  restart|force-reload)
+        echo -n "Restarting $DESC: "
+        start-stop-daemon --stop --quiet --pidfile \
+                /usr/local/nginx/logs/$NAME.pid --exec $DAEMON
+        sleep 1
+        start-stop-daemon --start --quiet --pidfile \
+                /usr/local/nginx/logs/$NAME.pid --exec $DAEMON -- $DAEMON_OPTS
+        echo "$NAME."
+        ;;
+  reload)
+	      echo -n "Reloading $DESC configuration: "
+	      start-stop-daemon --stop --signal HUP --quiet --pidfile /usr/local/nginx/logs/$NAME.pid \
+	          --exec $DAEMON 
+	      echo "$NAME."
+	      ;;
+	  *)
+	        N=/etc/init.d/$NAME
+	        echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2
+	        exit 1   
+	        ;;
+	esac
+
+	exit 0